From 395d2de0d877ed0e0c6272b1595b32e5b22d6b6b Mon Sep 17 00:00:00 2001 From: Arndtroide Date: Sat, 10 Aug 2024 23:09:15 +0200 Subject: [PATCH] Deckel2 part1 --- Deckel1.scad | 64 ++++++++++++-------------------------- Deckel2.scad | 88 +++++++++++++++++----------------------------------- 2 files changed, 48 insertions(+), 104 deletions(-) diff --git a/Deckel1.scad b/Deckel1.scad index e1d904d..e8fc5d1 100644 --- a/Deckel1.scad +++ b/Deckel1.scad @@ -9,15 +9,30 @@ b=10; // Fugenhöhe $fn=res; R=d/2; +rad=da/2+6; difference() { union() { - // Außenring + // Außenring difference() { - translate([0,0,0]) cylinder(h=a+b, d=da+a); - // Dickere Decke im Spalt - translate([0,0,-0.1]) cylinder(h=b+0.1-1, d=da); - translate([0,0,-0.1]) cylinder(h=b+0.1, d=di); + union() { + translate([0,0,0]) cylinder(h=a+b, d=da+a); + //Flansche außen + linear_extrude(height = b+a, center = false, convexity = 10, twist = 0) { + hull() { + for (i=[0:120:359]) { + translate([rad*cos(i),rad*sin(i),0])circle(d=12); + } + } + } + } + // Dickere Decke im Spalt + translate([0,0,-0.1]) cylinder(h=b+0.1-1, d=da); + translate([0,0,-0.1]) cylinder(h=b+0.1, d=di); + // Flanschloch + for (i=[0:120:359]) { + translate([rad*cos(i),rad*sin(i),-0.1])cylinder(h=b+a+5+0.2, d=6, center=false); + } } // Innenring difference() { @@ -41,42 +56,3 @@ difference() { // Loch für Laser translate([-2.5,50,-0.3]) cube([5,4,a+b+0.6]); } - - -// kann weg? - -//difference() { -// rotate_extrude(angle=3) translate([R+9,0,0]) square([a,b],center=true); -// rotate([0,0,1]) rotate([90,0,0]) translate([R+9,0,0]) cylinder(h=8,d=5,center=true); -//} - -//difference() { -// rotate([0,0,347]) rotate_extrude(angle=3) translate([R+9,0,0]) square([a,b],center=true); -// rotate([0,0,348]) rotate([90,0,0]) translate([R+9,0,0]) cylinder(h=8,d=5,center=true); -//} - -/* -difference() { - rotate([0,0,5]) rotate_extrude(angle=3) translate([R+12,2,0]) square([a, b+5],center=true); - rotate([0,0,6]) rotate([90,0,0]) translate([R+12,0,0]) cylinder(h=8,d=5,center=true); - union() { - difference() { - rotate([0,0,6]) rotate([90,0,0]) translate([R+12,0,0]) cylinder(h=9,d=15,center=true); - rotate([0,0,6]) rotate([90,0,0]) translate([R+12,0,0]) cylinder(h=8,d=10,center=true); - rotate([0,0,5]) rotate_extrude(angle=3) translate([R+12,5.5,0]) square([a+1, b+1],center=true); - } - } -} - -difference() { - rotate([0,0,342]) rotate_extrude(angle=3) translate([R+12,2,0]) square([a,b+5],center=true); - rotate([0,0,343]) rotate([90,0,0]) translate([R+12,0,0]) cylinder(h=8,d=5,center=true); - union() { - difference() { - rotate([0,0,343]) rotate([90,0,0]) translate([R+12,0,0]) cylinder(h=9,d=15,center=true); - rotate([0,0,343]) rotate([90,0,0]) translate([R+12,0,0]) cylinder(h=8,d=10,center=true); - rotate([0,0,342]) rotate_extrude(angle=3) translate([R+12,5.5,0]) square([a+1, b+1],center=true); - } - } -} -*/ \ No newline at end of file diff --git a/Deckel2.scad b/Deckel2.scad index e1d904d..452d977 100644 --- a/Deckel2.scad +++ b/Deckel2.scad @@ -9,74 +9,42 @@ b=10; // Fugenhöhe $fn=res; R=d/2; +rad=da/2+6; difference() { union() { - // Außenring + // Außenring difference() { - translate([0,0,0]) cylinder(h=a+b, d=da+a); - // Dickere Decke im Spalt - translate([0,0,-0.1]) cylinder(h=b+0.1-1, d=da); - translate([0,0,-0.1]) cylinder(h=b+0.1, d=di); + union() { + translate([0,0,0]) cylinder(h=a+b+2, d=di+(da-di)/2+a/2); + //Flansche außen + translate([0,0,2])linear_extrude(height = b+a, center = false, convexity = 10, twist = 0) { + hull() { + for (i=[0:120:359]) { + translate([rad*cos(i),rad*sin(i),0])circle(d=12); + } + } + } + } + // Hohlraum + translate([0,0,-0.1]) cylinder(h=b+2+0.1, d=di+(da-di)/2-a/2); + // Flanschloch + for (i=[0:120:359]) { + translate([rad*cos(i),rad*sin(i),-0.1])cylinder(h=b+a+5+0.2, d=6); + } + // Kabelloch + translate([(rad-1)*cos(180),(rad-1)*sin(180),7])rotate([0,90,0])cylinder(h=b+a+5+0.2, d=6); } - // Innenring - difference() { - translate([0,0,-0.1]) cylinder(h=b+0.2, d=di); - translate([0,0,-0.2]) cylinder(h=b+0.1, d=di-a); - } - } - // Spalt für Oberen Deckel - translate([0,0,b+a-1])difference() { - translate([0,0,0]) cylinder(h=1.1, d=di+(da-di)/2+a/2); - translate([0,0,-0.1]) cylinder(h=1+0.2, d=di+(da-di)/2-a/2); - } // Einkerbung Laserplatine - translate([-15,45,a+b-0.9]) difference() { - cube([30,11,1]); - translate([0,0,0])cube([4.1,2.2,1.1]); - translate([26,0,0])cube([4.1,2.2,1.1]); - translate([26,8.8,0])cube([4.1,2.2,1.1]); - translate([0,8.8,0])cube([4.1,2.2,1.1]); + translate([-15,45,0.1]) difference() { + cube([30,11,-0.9]); + translate([0,0,-0.1])cube([4.1,2.2,-1.2]); + translate([26,0,-0.1])cube([4.1,2.2,-1.2]); + translate([26,8.8,-0.1])cube([4.1,2.2,-1.2]); + translate([0,8.8,-0.1])cube([4.1,2.2,-1.2]); } // Loch für Laser - translate([-2.5,50,-0.3]) cube([5,4,a+b+0.6]); -} - - -// kann weg? - -//difference() { -// rotate_extrude(angle=3) translate([R+9,0,0]) square([a,b],center=true); -// rotate([0,0,1]) rotate([90,0,0]) translate([R+9,0,0]) cylinder(h=8,d=5,center=true); -//} - -//difference() { -// rotate([0,0,347]) rotate_extrude(angle=3) translate([R+9,0,0]) square([a,b],center=true); -// rotate([0,0,348]) rotate([90,0,0]) translate([R+9,0,0]) cylinder(h=8,d=5,center=true); -//} - -/* -difference() { - rotate([0,0,5]) rotate_extrude(angle=3) translate([R+12,2,0]) square([a, b+5],center=true); - rotate([0,0,6]) rotate([90,0,0]) translate([R+12,0,0]) cylinder(h=8,d=5,center=true); - union() { - difference() { - rotate([0,0,6]) rotate([90,0,0]) translate([R+12,0,0]) cylinder(h=9,d=15,center=true); - rotate([0,0,6]) rotate([90,0,0]) translate([R+12,0,0]) cylinder(h=8,d=10,center=true); - rotate([0,0,5]) rotate_extrude(angle=3) translate([R+12,5.5,0]) square([a+1, b+1],center=true); - } + translate([-2.5,50,-0.3]) cube([5,4,a+b+0.6]); } } -difference() { - rotate([0,0,342]) rotate_extrude(angle=3) translate([R+12,2,0]) square([a,b+5],center=true); - rotate([0,0,343]) rotate([90,0,0]) translate([R+12,0,0]) cylinder(h=8,d=5,center=true); - union() { - difference() { - rotate([0,0,343]) rotate([90,0,0]) translate([R+12,0,0]) cylinder(h=9,d=15,center=true); - rotate([0,0,343]) rotate([90,0,0]) translate([R+12,0,0]) cylinder(h=8,d=10,center=true); - rotate([0,0,342]) rotate_extrude(angle=3) translate([R+12,5.5,0]) square([a+1, b+1],center=true); - } - } -} -*/ \ No newline at end of file