avollkopf
a136f6b467
set default for mqtt sensor to 999 and add check to fermentersteps target temp step
2022-03-05 11:29:33 +01:00
avollkopf
bce0a0025b
cleanup in fermentation controller and setup.py
2022-03-05 11:02:49 +01:00
avollkopf
b84e33822b
added shutdown flag to all steps for on_timer_done
2022-03-02 17:25:59 +01:00
avollkopf
662e8b4497
updated libs and fix eventloop from lib_update branch
2022-03-02 12:35:16 +01:00
avollkopf
3cf48fff04
fix to start timer directly after restart on step with remaining time
2022-03-02 10:29:21 +01:00
avollkopf
1d3298fc60
autostart active fermenterstep with remaining time
2022-03-02 07:53:43 +01:00
avollkopf
5bcbb7480a
fixes for femrentersteps on controler shutdown
2022-03-01 21:55:52 +01:00
avollkopf
c272d1ba2a
Fixed time format for timer and messages in case of longer steps
2022-02-25 07:28:18 +01:00
avollkopf
d87a578447
fix calculation of fermentation end time -> Format still open
2022-02-24 18:37:46 +01:00
avollkopf
9ed640cf6a
Add fermentation time in stepform as days, hours, minutes
2022-02-22 18:32:48 +01:00
avollkopf
3aa9ad9cd2
fix fermenter steps -> self.next() requires now fermenter id
2022-02-21 19:39:36 +01:00
avollkopf
84f9bbb67f
update on fermentersteps for automode
2022-02-21 17:54:22 +01:00
avollkopf
36329fb533
further changes to support fermentersteps - WIP
2022-02-21 07:16:34 +01:00
avollkopf
2cc2df0208
fermentertest
2022-02-17 21:42:54 +01:00
avollkopf
94d32c4dc4
fixed duplicated mqtt message for gpioactors
2022-02-07 18:57:02 +01:00
pascal1404
49e8488c0b
Merge branch 'development' into master
2022-02-06 14:06:21 +01:00
pascal1404
ab60c5c0fc
Remove kettle and fermenter target temp logs and actor logs
2022-02-06 14:05:31 +01:00
pascal1404
f8024f3b49
Add Influxdb-cloud connection and log for actor, fermenter and kettles
2022-02-04 20:48:55 +01:00
avollkopf
6c1f928933
Update on mqttutil
...
An update on kettle and fermenter is triggered on start of cbpi
2022-02-04 17:08:10 +01:00
avollkopf
ed141f8788
Added mqttutil extension
...
- forces mqtt update for kettle and femrenter in specified timeframes even w/o change in payload
- required for mqttdevice
- only active if mqtt is enabled
- can be set to never and is also deactivated when mqtt is enabled
2022-01-31 17:17:53 +01:00
avollkopf
2de62ca7d5
Added Actor for Cooldown step in settings
...
- Default Actor can be defined for cooldown to trigger cooling water on and off.
- will be used in automated recipe creation for cooldown step
2022-01-28 07:56:24 +01:00
avollkopf
8320853399
Minor fixes
...
- onewire is not hardcoded to busmaster 1
- try to catch exception while sending data to WS and WS has closed connection
2022-01-25 07:47:40 +01:00
avollkopf
027966af12
Reverted back to item based mqtt updates for testing
2022-01-12 17:56:30 +01:00
avollkopf
dfa5df2ef1
Some fixes
...
- Different names for fermentersteps as Notificationstep caused an issue (steps not yot implemented for fermentation)
- Reverted back item based mqtt as this may require further testing -> will be activated in dev branch later
2022-01-11 06:59:16 +01:00
avollkopf
a8f7f2d92f
Additional CBPIFermenterStep Class
...
Class has been activated but is not yet used
Fix in mqtt actor power action setting
2022-01-05 06:46:35 +01:00
avollkopf
78a0832fd2
Update __init__.py
2022-01-03 17:21:32 +01:00
avollkopf
51136aef88
Unification of mqtt data
...
-> sensor values are updated under sensordata/{sensorid}
One topic for each sensor to keep data small (esp compatibility)
actor, kettle, sensor, fermenter, steps are updated also for each id individually to keep packets small
e.g. actorupdate/{actorid}
This was proposed by Innuendo to ensure compatibility with the ESP based MQTTDevice
2022-01-03 12:47:20 +01:00
avollkopf
ba42027e75
Another fix based now on a life Pi system
...
- fixed storage of femrenter_data.json -> Fermenters are in 'data'
- fixed hysteresis
2022-01-02 13:24:40 +01:00
avollkopf
751b3dcad9
Bug fix for first startup w/o fermenter
2022-01-02 12:43:33 +01:00
avollkopf
d7c1b64493
Added Fermenters (development)
...
Added fermenter type
Added fermenter logic (incl. new class)
-> will require cbpi4ui -> >= 0.1.a1
Still under development, but fermentation w/o steps should be working
2022-01-02 11:25:56 +01:00
avollkopf
9b3219d89c
Test to transfer Data to influxdb
...
CSV logfile writing can be switched off via settings
influxdb can be switched on via settings
->Some changes will be required
2021-12-14 07:20:22 +01:00
Philipp Grathwohl
f337cb8e97
Add generic and Tasmota specific MQTT actors
2021-12-03 13:26:12 +01:00
avollkopf
80bdac45ce
some fixes for actor power
...
- Actor used to set power to 100 eventhough target was 0
- moved chromium.desktop file to config folder -> easier available for users and potential to enable chromium desktop via cbpi commandline in future
2021-12-02 14:48:39 +01:00
avollkopf
db39d82432
Some fixes
...
- command line cbpi plugins -> not interrupted if plugin has not been installed correctly
- round power value submitted by mqtt plugin
2021-11-26 22:54:55 +01:00
avollkopf
b2e61bee8e
Changed setup.py for RPI.GPIO
...
RPi.GPIO 0.7.0 is causing an error if installed under bullseye and python 3.9
-> 0.7.1a4 solves the issue for now.
-> will be changed as soon as new RPi.GPIO release is comming out
2021-11-24 22:10:28 +01:00
avollkopf
3724f76faa
mqtt sensor fix
...
- mqtt sensor is now also working after changing the configuration
- config.yaml accepts now also 'true' besides 'True' to activate mqtt
2021-11-23 17:33:58 +01:00
avollkopf
71897c8276
Some MQTT updates
...
- MQTT actor power change also if actor is off
- payload Filter for MQTT sensor
2021-11-22 17:33:46 +01:00
avollkopf
01386ef0da
Update config.yaml
2021-11-22 16:11:24 +01:00
avollkopf
75ab9b96fc
Added MQTT Actor and power setting
2021-11-22 16:09:09 +01:00
avollkopf
a0e89fe4dc
Update kettle controller/mashsteps
2021-11-20 11:13:51 +01:00
avollkopf
2fca6dcdc9
Actor Power fixes
2021-11-15 20:18:33 +01:00
avollkopf
80a81c50a2
some tweaks for actor power settings
2021-11-11 11:22:13 +01:00
avollkopf
40121e667e
Experimental power mode for standard actor
...
Power = 100: standard on
Standard sampling time is 5 seconds.
if power is set to 50%, heating time is 2.5 sec and witing time (gpio off) is also 2.5 sec
Changing power to lower readings, wil reduce heating time within the 5 seconeds and increase waiting time
Increase of power results in longer heating times and reduced wait times
Sort of a poos men's PWM with a fix requency of 0.2 hz
This will reduce the complexity of all PID plugins.
Some additional tests and changes might be required for api.
2021-11-08 19:01:53 +01:00
avollkopf
5b0f351a98
Update __init__.py
2021-11-08 14:09:32 +01:00
avollkopf
2462f9329a
Update on pwm test
...
-> set power action should now update also directly in dashboard
2021-11-08 14:04:28 +01:00
avollkopf
4c543b46f7
added power to actor dataclass
2021-11-06 15:15:11 +01:00
avollkopf
3bc70f8c7f
PWM Actor test
2021-11-05 19:32:34 +01:00
avollkopf
326d24c48f
BF StrikeTemp test and some fixes
2021-11-03 09:30:16 +01:00
avollkopf
45c084360f
Reverted mashsteps back
...
- last change caused some issues
2021-10-03 16:50:36 +02:00
avollkopf
dd7da9ce71
Added actiions for sensors and minor fix in mashsteps
...
- Actions can now also be called for sensors -> will require ui 0.0.18.
- Some fixes for timer in mashsteps in case of pause is pressed
2021-09-26 12:41:39 +02:00
