esphome/tests/test1.2.yaml

---
substitutions:
  devicename: test1_2
  sensorname: my
  textname: template
  roomname: living_room

esphome:
  name: test1_2
  name_add_mac_suffix: true
  platform: ESP32
  board: nodemcu-32s
  build_path: build/test1

i2c:
  sda: GPIO21
  scl: GPIO22
  id: i2c_bus
  frequency: 400kHz

logger:
  level: VERBOSE

api:

wifi:
  ssid: "ssid"

time:
  - platform: ds3232
    id: ds3232_chip
    i2c_id: i2c_bus
    temperature:
      name: "Chip Temperature"
    use_heartbeat: false
    interrupt_pin:
      number: GPIO18
      mode:
        input: true
        pullup: true
    reset_pin: GPIO23
    fire_alarms_on_startup: true
    first_alarm:
      mode: MATCH_DAY_OF_WEEK_AND_TIME
      time_pattern: "Wed 12:04:23"
    second_alarm:
      mode: MATCH_TIME
      time:
        minute: 10
        hour: 21
    on_first_alarm:
      then:
        - lambda: |-
            if(!id(counter_one)->is_initialized()) {
              ESP_LOGD("TEST", "NVRAM not yet ready...");
              return;
            };
            int i = id(counter_one)->value();
            i++;
            id(test_snsr).publish_state(i);
            id(counter_one)->value() = i;
    on_heartbeat:
      then:
        - lambda: |-
            ESP_LOGD("TEST", "1Hz heartbeat signal");
    on_second_alarm:
      then:
        - logger.log: "Alarm 2 has been fired"
        - lambda: |-
            id(has_ever_fired)->value() = true;
    # on_power_change:
    #   then:
    #     - lambda: |-
    #         id(counter_one)->value() = id(counter_one)->value() + 1;
    #     - if:
    #         condition:
    #           lambda: |-
    #             return id(has_ever_fired)->value();
    #         then:
    #           - ds3232.enable_heartbeat: ds3232_chip
    #         else:
    #           - ds3232.enable_alarms: ds3232_chip
    persistent_storage:
      - id: counter_one
        type: uint64
        register: 0x21
        initial_value: '3548'
      - id: has_ever_fired
        type: bool
        register: 0x20

sensor:
  - platform: template
    name: "Test"
    id: test_snsr
  - platform: template
    name: "NVRAM Counter"
    lambda: |-
      if(id(counter_one)->is_initialized())
        return id(counter_one)->value();
      else
        return NAN;
    update_interval: 5s
  - platform: template
    name: "Has Ever Fired"
    update_interval: 5s
    lambda: |-
      if(id(has_ever_fired)->is_initialized())
        return id(has_ever_fired)->value();
      else
        return NAN;

button:
  - platform: template
    name: Reset variables
    on_press:
      then:
      - ds3232_nvram.set:
          id: has_ever_fired
          value: 'false'
      - ds3232_nvram.set:
          id: counter_one
          value: '5555555'
  - platform: template
    name: Factory Reset
    on_press:
      then:
        - ds3232.factory_reset
  - platform: template
    name: Toggle DS3232 mode
    on_press:
      then:
      - if:
          condition:
            ds3232.is_heartbeat_enabled: ds3232_chip
          then:
            - ds3232.enable_alarms: ds3232_chip
          else:
            - ds3232.enable_heartbeat: ds3232_chip
  - platform: template
    name: Set New Alarm
    on_press:
      - ds3232.set_alarm_one:
          mode: MATCH_SECONDS
          active: true
          time_pattern: "* *:*:10"
      - ds3232.set_alarm_two:
          mode: MATCH_MINUTES_SECONDS
          active: true
          time:
            minute: 15
      - ds3232_nvram.set:
          id: has_ever_fired
          value: 'false'