Merge branch 'dev' into radon_eye_rd200-v2-add

.github/workflows/ci.yml

@@ -315,7 +315,9 @@ jobs:
           key: platformio-${{ matrix.pio_cache_key }}
 
       - name: Install clang-tidy
-        run: sudo apt-get install clang-tidy-14
+        run: |
+          sudo apt-get update
+          sudo apt-get install clang-tidy-14
 
       - name: Register problem matchers
         run: |
@@ -397,7 +399,9 @@ jobs:
         file: ${{ fromJson(needs.list-components.outputs.components) }}
     steps:
       - name: Install dependencies
-        run: sudo apt-get install libsdl2-dev
+        run: |
+          sudo apt-get update
+          sudo apt-get install libsdl2-dev
 
       - name: Check out code from GitHub
         uses: actions/checkout@v4.1.7
@@ -451,7 +455,9 @@ jobs:
         run: echo ${{ matrix.components }}
 
       - name: Install dependencies
-        run: sudo apt-get install libsdl2-dev
+        run: |
+          sudo apt-get update
+          sudo apt-get install libsdl2-dev
 
       - name: Check out code from GitHub
         uses: actions/checkout@v4.1.7

esphome/components/esp32_rmt_led_strip/led_strip.cpp

@@ -22,7 +22,7 @@ void ESP32RMTLEDStripLightOutput::setup() {
 
   size_t buffer_size = this->get_buffer_size_();
 
-  ExternalRAMAllocator<uint8_t> allocator(ExternalRAMAllocator<uint8_t>::ALLOW_FAILURE);
+  RAMAllocator<uint8_t> allocator(this->use_psram_ ? 0 : RAMAllocator<uint8_t>::ALLOC_INTERNAL);
   this->buf_ = allocator.allocate(buffer_size);
   if (this->buf_ == nullptr) {
     ESP_LOGE(TAG, "Cannot allocate LED buffer!");
@@ -37,7 +37,7 @@ void ESP32RMTLEDStripLightOutput::setup() {
     return;
   }
 
-  ExternalRAMAllocator<rmt_item32_t> rmt_allocator(ExternalRAMAllocator<rmt_item32_t>::ALLOW_FAILURE);
+  RAMAllocator<rmt_item32_t> rmt_allocator(this->use_psram_ ? 0 : RAMAllocator<rmt_item32_t>::ALLOC_INTERNAL);
   this->rmt_buf_ = rmt_allocator.allocate(buffer_size * 8 +
                                           1);  // 8 bits per byte, 1 rmt_item32_t per bit + 1 rmt_item32_t for reset
 

esphome/components/esp32_rmt_led_strip/led_strip.h

@@ -45,6 +45,7 @@ class ESP32RMTLEDStripLightOutput : public light::AddressableLight {
   void set_num_leds(uint16_t num_leds) { this->num_leds_ = num_leds; }
   void set_is_rgbw(bool is_rgbw) { this->is_rgbw_ = is_rgbw; }
   void set_is_wrgb(bool is_wrgb) { this->is_wrgb_ = is_wrgb; }
+  void set_use_psram(bool use_psram) { this->use_psram_ = use_psram; }
 
   /// Set a maximum refresh rate in µs as some lights do not like being updated too often.
   void set_max_refresh_rate(uint32_t interval_us) { this->max_refresh_rate_ = interval_us; }
@@ -75,6 +76,7 @@ class ESP32RMTLEDStripLightOutput : public light::AddressableLight {
   uint16_t num_leds_;
   bool is_rgbw_;
   bool is_wrgb_;
+  bool use_psram_;
 
   rmt_item32_t bit0_, bit1_, reset_;
   RGBOrder rgb_order_;

esphome/components/esp32_rmt_led_strip/light.py

@@ -55,7 +55,7 @@ CHIPSETS = {
     "SM16703": LEDStripTimings(300, 900, 900, 300, 0, 0),
 }
 
-
+CONF_USE_PSRAM = "use_psram"
 CONF_IS_WRGB = "is_wrgb"
 CONF_BIT0_HIGH = "bit0_high"
 CONF_BIT0_LOW = "bit0_low"
@@ -77,6 +77,7 @@ CONFIG_SCHEMA = cv.All(
             cv.Optional(CONF_CHIPSET): cv.one_of(*CHIPSETS, upper=True),
             cv.Optional(CONF_IS_RGBW, default=False): cv.boolean,
             cv.Optional(CONF_IS_WRGB, default=False): cv.boolean,
+            cv.Optional(CONF_USE_PSRAM, default=True): cv.boolean,
             cv.Inclusive(
                 CONF_BIT0_HIGH,
                 "custom",
@@ -145,6 +146,7 @@ async def to_code(config):
     cg.add(var.set_rgb_order(config[CONF_RGB_ORDER]))
     cg.add(var.set_is_rgbw(config[CONF_IS_RGBW]))
     cg.add(var.set_is_wrgb(config[CONF_IS_WRGB]))
+    cg.add(var.set_use_psram(config[CONF_USE_PSRAM]))
 
     cg.add(
         var.set_rmt_channel(

esphome/components/event/__init__.py

@@ -1,6 +1,6 @@
 from esphome import automation
 import esphome.codegen as cg
-from esphome.components import mqtt
+from esphome.components import mqtt, web_server
 import esphome.config_validation as cv
 from esphome.const import (
     CONF_DEVICE_CLASS,
@@ -11,6 +11,7 @@ from esphome.const import (
     CONF_MQTT_ID,
     CONF_ON_EVENT,
     CONF_TRIGGER_ID,
+    CONF_WEB_SERVER,
     DEVICE_CLASS_BUTTON,
     DEVICE_CLASS_DOORBELL,
     DEVICE_CLASS_EMPTY,
@@ -40,17 +41,21 @@ EventTrigger = event_ns.class_("EventTrigger", automation.Trigger.template())
 
 validate_device_class = cv.one_of(*DEVICE_CLASSES, lower=True, space="_")
 
-EVENT_SCHEMA = cv.ENTITY_BASE_SCHEMA.extend(cv.MQTT_COMPONENT_SCHEMA).extend(
+EVENT_SCHEMA = (
-    {
+    cv.ENTITY_BASE_SCHEMA.extend(web_server.WEBSERVER_SORTING_SCHEMA)
-        cv.OnlyWith(CONF_MQTT_ID, "mqtt"): cv.declare_id(mqtt.MQTTEventComponent),
+    .extend(cv.MQTT_COMPONENT_SCHEMA)
-        cv.GenerateID(): cv.declare_id(Event),
+    .extend(
-        cv.Optional(CONF_DEVICE_CLASS): validate_device_class,
+        {
-        cv.Optional(CONF_ON_EVENT): automation.validate_automation(
+            cv.OnlyWith(CONF_MQTT_ID, "mqtt"): cv.declare_id(mqtt.MQTTEventComponent),
-            {
+            cv.GenerateID(): cv.declare_id(Event),
-                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(EventTrigger),
+            cv.Optional(CONF_DEVICE_CLASS): validate_device_class,
-            }
+            cv.Optional(CONF_ON_EVENT): automation.validate_automation(
-        ),
+                {
-    }
+                    cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(EventTrigger),
+                }
+            ),
+        }
+    )
 )
 
 _UNDEF = object()
@@ -97,6 +102,9 @@ async def setup_event_core_(var, config, *, event_types: list[str]):
         mqtt_ = cg.new_Pvariable(mqtt_id, var)
         await mqtt.register_mqtt_component(mqtt_, config)
 
+    if web_server_config := config.get(CONF_WEB_SERVER):
+        await web_server.add_entity_config(var, web_server_config)
+
 
 async def register_event(var, config, *, event_types: list[str]):
     if not CORE.has_id(config[CONF_ID]):

esphome/components/shelly_dimmer/shelly_dimmer.cpp

@@ -64,46 +64,46 @@ uint16_t shelly_dimmer_checksum(const uint8_t *buf, int len) {
   return std::accumulate<decltype(buf), uint16_t>(buf, buf + len, 0);
 }
 
+bool ShellyDimmer::is_running_configured_version() const {
+  return this->version_major_ == USE_SHD_FIRMWARE_MAJOR_VERSION &&
+         this->version_minor_ == USE_SHD_FIRMWARE_MINOR_VERSION;
+}
+
+void ShellyDimmer::handle_firmware() {
+  // Reset the STM32 and check the firmware version.
+  this->reset_normal_boot_();
+  this->send_command_(SHELLY_DIMMER_PROTO_CMD_VERSION, nullptr, 0);
+  ESP_LOGI(TAG, "STM32 current firmware version: %d.%d, desired version: %d.%d", this->version_major_,
+           this->version_minor_, USE_SHD_FIRMWARE_MAJOR_VERSION, USE_SHD_FIRMWARE_MINOR_VERSION);
+
+  if (!is_running_configured_version()) {
+#ifdef USE_SHD_FIRMWARE_DATA
+    if (!this->upgrade_firmware_()) {
+      ESP_LOGW(TAG, "Failed to upgrade firmware");
+      this->mark_failed();
+      return;
+    }
+
+    this->reset_normal_boot_();
+    this->send_command_(SHELLY_DIMMER_PROTO_CMD_VERSION, nullptr, 0);
+    if (!is_running_configured_version()) {
+      ESP_LOGE(TAG, "STM32 firmware upgrade already performed, but version is still incorrect");
+      this->mark_failed();
+      return;
+    }
+#else
+    ESP_LOGW(TAG, "Firmware version mismatch, put 'update: true' in the yaml to flash an update.");
+#endif
+  }
+}
+
 void ShellyDimmer::setup() {
   this->pin_nrst_->setup();
   this->pin_boot0_->setup();
 
   ESP_LOGI(TAG, "Initializing Shelly Dimmer...");
 
-  // Reset the STM32 and check the firmware version.
+  this->handle_firmware();
-  for (int i = 0; i < 2; i++) {
-    this->reset_normal_boot_();
-    this->send_command_(SHELLY_DIMMER_PROTO_CMD_VERSION, nullptr, 0);
-    ESP_LOGI(TAG, "STM32 current firmware version: %d.%d, desired version: %d.%d", this->version_major_,
-             this->version_minor_, USE_SHD_FIRMWARE_MAJOR_VERSION, USE_SHD_FIRMWARE_MINOR_VERSION);
-    if (this->version_major_ != USE_SHD_FIRMWARE_MAJOR_VERSION ||
-        this->version_minor_ != USE_SHD_FIRMWARE_MINOR_VERSION) {
-#ifdef USE_SHD_FIRMWARE_DATA
-      // Update firmware if needed.
-      ESP_LOGW(TAG, "Unsupported STM32 firmware version, flashing");
-      if (i > 0) {
-        // Upgrade was already performed but the reported version is still not right.
-        ESP_LOGE(TAG, "STM32 firmware upgrade already performed, but version is still incorrect");
-        this->mark_failed();
-        return;
-      }
-
-      if (!this->upgrade_firmware_()) {
-        ESP_LOGW(TAG, "Failed to upgrade firmware");
-        this->mark_failed();
-        return;
-      }
-
-      // Firmware upgrade completed, do the checks again.
-      continue;
-#else
-      ESP_LOGW(TAG, "Firmware version mismatch, put 'update: true' in the yaml to flash an update.");
-      this->mark_failed();
-      return;
-#endif
-    }
-    break;
-  }
 
   this->send_settings_();
   // Do an immediate poll to refresh current state.

esphome/components/shelly_dimmer/shelly_dimmer.h

@@ -20,6 +20,8 @@ class ShellyDimmer : public PollingComponent, public light::LightOutput, public
  public:
   float get_setup_priority() const override { return setup_priority::LATE; }
 
+  bool is_running_configured_version() const;
+  void handle_firmware();
   void setup() override;
   void update() override;
   void dump_config() override;

esphome/components/touchscreen/touchscreen.cpp

@@ -18,8 +18,8 @@ void Touchscreen::attach_interrupt_(InternalGPIOPin *irq_pin, esphome::gpio::Int
 
 void Touchscreen::call_setup() {
   if (this->display_ != nullptr) {
-    this->display_width_ = this->display_->get_native_width();
+    this->display_width_ = this->display_->get_width();
-    this->display_height_ = this->display_->get_native_height();
+    this->display_height_ = this->display_->get_height();
   }
   PollingComponent::call_setup();
 }

esphome/components/web_server/web_server.cpp

@@ -1441,9 +1441,26 @@ std::string WebServer::alarm_control_panel_json(alarm_control_panel::AlarmContro
 void WebServer::on_event(event::Event *obj, const std::string &event_type) {
   this->events_.send(this->event_json(obj, event_type, DETAIL_STATE).c_str(), "state");
 }
+void WebServer::handle_event_request(AsyncWebServerRequest *request, const UrlMatch &match) {
+  for (event::Event *obj : App.get_events()) {
+    if (obj->get_object_id() != match.id)
+      continue;
 
+    if (request->method() == HTTP_GET && match.method.empty()) {
+      auto detail = DETAIL_STATE;
+      auto *param = request->getParam("detail");
+      if (param && param->value() == "all") {
+        detail = DETAIL_ALL;
+      }
+      std::string data = this->event_json(obj, "", detail);
+      request->send(200, "application/json", data.c_str());
+      return;
+    }
+  }
+  request->send(404);
+}
 std::string WebServer::event_json(event::Event *obj, const std::string &event_type, JsonDetail start_config) {
-  return json::build_json([obj, event_type, start_config](JsonObject root) {
+  return json::build_json([this, obj, event_type, start_config](JsonObject root) {
     set_json_id(root, obj, "event-" + obj->get_object_id(), start_config);
     if (!event_type.empty()) {
       root["event_type"] = event_type;
@@ -1454,6 +1471,12 @@ std::string WebServer::event_json(event::Event *obj, const std::string &event_ty
         event_types.add(event_type);
       }
       root["device_class"] = obj->get_device_class();
+      if (this->sorting_entitys_.find(obj) != this->sorting_entitys_.end()) {
+        root["sorting_weight"] = this->sorting_entitys_[obj].weight;
+        if (this->sorting_groups_.find(this->sorting_entitys_[obj].group_id) != this->sorting_groups_.end()) {
+          root["sorting_group"] = this->sorting_groups_[this->sorting_entitys_[obj].group_id].name;
+        }
+      }
     }
   });
 }
@@ -1645,6 +1668,11 @@ bool WebServer::canHandle(AsyncWebServerRequest *request) {
     return true;
 #endif
 
+#ifdef USE_EVENT
+  if (request->method() == HTTP_GET && match.domain == "event")
+    return true;
+#endif
+
 #ifdef USE_UPDATE
   if ((request->method() == HTTP_POST || request->method() == HTTP_GET) && match.domain == "update")
     return true;

esphome/components/web_server/web_server.h

@@ -322,6 +322,9 @@ class WebServer : public Controller, public Component, public AsyncWebHandler {
 #ifdef USE_EVENT
   void on_event(event::Event *obj, const std::string &event_type) override;
 
+  /// Handle a event request under '/event<id>'.
+  void handle_event_request(AsyncWebServerRequest *request, const UrlMatch &match);
+
   /// Dump the event details with its value as a JSON string.
   std::string event_json(event::Event *obj, const std::string &event_type, JsonDetail start_config);
 #endif

esphome/core/helpers.h

@@ -651,35 +651,45 @@ void delay_microseconds_safe(uint32_t us);
 /// @name Memory management
 ///@{
 
-/** An STL allocator that uses SPI RAM.
+/** An STL allocator that uses SPI or internal RAM.
+ * Returns `nullptr` in case no memory is available.
  *
- * By setting flags, it can be configured to don't try main memory if SPI RAM is full or unavailable, and to return
+ * By setting flags, it can be configured to:
- * `nulllptr` instead of aborting when no memory is available.
+ * - perform external allocation falling back to main memory if SPI RAM is full or unavailable
+ * - perform external allocation only
+ * - perform internal allocation only
  */
-template<class T> class ExternalRAMAllocator {
+template<class T> class RAMAllocator {
  public:
   using value_type = T;
 
   enum Flags {
-    NONE = 0,
+    NONE = 0,                 // Perform external allocation and fall back to internal memory
-    REFUSE_INTERNAL = 1 << 0,  ///< Refuse falling back to internal memory when external RAM is full or unavailable.
+    ALLOC_EXTERNAL = 1 << 0,  // Perform external allocation only.
-    ALLOW_FAILURE = 1 << 1,    ///< Don't abort when memory allocation fails.
+    ALLOC_INTERNAL = 1 << 1,  // Perform internal allocation only.
+    ALLOW_FAILURE = 1 << 2,   // Does nothing. Kept for compatibility.
   };
 
-  ExternalRAMAllocator() = default;
+  RAMAllocator() = default;
-  ExternalRAMAllocator(Flags flags) : flags_{flags} {}
+  RAMAllocator(uint8_t flags) : flags_{flags} {}
-  template<class U> constexpr ExternalRAMAllocator(const ExternalRAMAllocator<U> &other) : flags_{other.flags_} {}
+  template<class U> constexpr RAMAllocator(const RAMAllocator<U> &other) : flags_{other.flags_} {}
 
   T *allocate(size_t n) {
     size_t size = n * sizeof(T);
     T *ptr = nullptr;
 #ifdef USE_ESP32
-    ptr = static_cast<T *>(heap_caps_malloc(size, MALLOC_CAP_SPIRAM | MALLOC_CAP_8BIT));
+    // External allocation by default or if explicitely requested
-#endif
+    if ((this->flags_ & Flags::ALLOC_EXTERNAL) || ((this->flags_ & Flags::ALLOC_INTERNAL) == 0)) {
-    if (ptr == nullptr && (this->flags_ & Flags::REFUSE_INTERNAL) == 0)
+      ptr = static_cast<T *>(heap_caps_malloc(size, MALLOC_CAP_SPIRAM | MALLOC_CAP_8BIT));
+    }
+    // Fallback to internal allocation if explicitely requested or no flag is specified
+    if (ptr == nullptr && ((this->flags_ & Flags::ALLOC_INTERNAL) || (this->flags_ & Flags::ALLOC_EXTERNAL) == 0)) {
       ptr = static_cast<T *>(malloc(size));  // NOLINT(cppcoreguidelines-owning-memory,cppcoreguidelines-no-malloc)
-    if (ptr == nullptr && (this->flags_ & Flags::ALLOW_FAILURE) == 0)
+    }
-      abort();
+#else
+    // Ignore ALLOC_EXTERNAL/ALLOC_INTERNAL flags if external allocation is not supported
+    ptr = static_cast<T *>(malloc(size));  // NOLINT(cppcoreguidelines-owning-memory,cppcoreguidelines-no-malloc)
+#endif
     return ptr;
   }
 
@@ -688,9 +698,11 @@ template<class T> class ExternalRAMAllocator {
   }
 
  private:
-  Flags flags_{Flags::ALLOW_FAILURE};
+  uint8_t flags_{Flags::ALLOW_FAILURE};
 };
 
+template<class T> using ExternalRAMAllocator = RAMAllocator<T>;
+
 /// @}
 
 /// @name Internal functions

script/test_build_components

@@ -2,6 +2,15 @@
 
 set -e
 
+help() {
+  echo "Usage: $0 [-e <config|compile|clean>] [-c <string>] [-t <string>]" 1>&2
+  echo 1>&2
+  echo "  - e - Parameter for esphome command. Default compile. Common alternative is config." 1>&2
+  echo "  - c - Component folder name to test. Default *. E.g. '-c logger'." 1>&2
+  echo "  - t - Target name to test. Put '-t list' to display all possibilities. E.g. '-t esp32-s2-idf-51'." 1>&2
+  exit 1
+}
+
 # Parse parameter:
 # - `e` - Parameter for `esphome` command. Default `compile`. Common alternative is `config`.
 # - `c` - Component folder name to test. Default `*`.
@@ -13,7 +22,7 @@ do
         e) esphome_command=${OPTARG};;
         c) target_component=${OPTARG};;
         t) requested_target_platform=${OPTARG};;
-        \?) echo "Usage: $0 [-e <config|compile|clean>] [-c <string>] [-t <string>]" 1>&2; exit 1;;
+        \?) help;;
     esac
 done
 
@@ -24,8 +33,8 @@ if ! [ -d "./tests/test_build_components/build" ]; then
 fi
 
 start_esphome() {
-  if [ -n "$requested_target_platform" ] && [ "$requested_target_platform" != "$target_platform" ]; then
+  if [ -n "$requested_target_platform" ] && [ "$requested_target_platform" != "$target_platform_with_version" ]; then
-    echo "Skiping $target_platform"
+    echo "Skipping $target_platform_with_version"
     return
   fi
   # create dynamic yaml file in `build` folder.