Compatibility with clang-tidy v14 (#2272)

.clang-tidy

@@ -2,9 +2,11 @@
 Checks: >-
   *,
   -abseil-*,
+  -altera-*,
   -android-*,
   -boost-*,
   -bugprone-branch-clone,
+  -bugprone-easily-swappable-parameters,
   -bugprone-narrowing-conversions,
   -bugprone-signed-char-misuse,
   -bugprone-too-small-loop-variable,
@@ -20,6 +22,7 @@ Checks: >-
   -clang-diagnostic-sign-compare,
   -clang-diagnostic-unused-variable,
   -clang-diagnostic-unused-const-variable,
+  -concurrency-*,
   -cppcoreguidelines-avoid-c-arrays,
   -cppcoreguidelines-avoid-goto,
   -cppcoreguidelines-avoid-magic-numbers,
@@ -72,6 +75,7 @@ Checks: >-
   -readability-const-return-type,
   -readability-convert-member-functions-to-static,
   -readability-else-after-return,
+  -readability-function-cognitive-complexity,
   -readability-implicit-bool-conversion,
   -readability-isolate-declaration,
   -readability-magic-numbers,

esphome/components/bme280/bme280.cpp

@@ -113,14 +113,14 @@ void BME280Component::setup() {
   this->calibration_.h5 = read_u8_(BME280_REGISTER_DIG_H5 + 1) << 4 | (read_u8_(BME280_REGISTER_DIG_H5) >> 4);
   this->calibration_.h6 = read_u8_(BME280_REGISTER_DIG_H6);
 
-  uint8_t humid_register = 0;
-  if (!this->read_byte(BME280_REGISTER_CONTROLHUMID, &humid_register)) {
+  uint8_t humid_control_val = 0;
+  if (!this->read_byte(BME280_REGISTER_CONTROLHUMID, &humid_control_val)) {
     this->mark_failed();
     return;
   }
-  humid_register &= ~0b00000111;
-  humid_register |= this->humidity_oversampling_ & 0b111;
-  if (!this->write_byte(BME280_REGISTER_CONTROLHUMID, humid_register)) {
+  humid_control_val &= ~0b00000111;
+  humid_control_val |= this->humidity_oversampling_ & 0b111;
+  if (!this->write_byte(BME280_REGISTER_CONTROLHUMID, humid_control_val)) {
     this->mark_failed();
     return;
   }
@@ -169,11 +169,11 @@ inline uint8_t oversampling_to_time(BME280Oversampling over_sampling) { return (
 void BME280Component::update() {
   // Enable sensor
   ESP_LOGV(TAG, "Sending conversion request...");
-  uint8_t meas_register = 0;
-  meas_register |= (this->temperature_oversampling_ & 0b111) << 5;
-  meas_register |= (this->pressure_oversampling_ & 0b111) << 2;
-  meas_register |= BME280_MODE_FORCED;
-  if (!this->write_byte(BME280_REGISTER_CONTROL, meas_register)) {
+  uint8_t meas_value = 0;
+  meas_value |= (this->temperature_oversampling_ & 0b111) << 5;
+  meas_value |= (this->pressure_oversampling_ & 0b111) << 2;
+  meas_value |= BME280_MODE_FORCED;
+  if (!this->write_byte(BME280_REGISTER_CONTROL, meas_value)) {
     this->status_set_warning();
     return;
   }

esphome/components/bmp280/bmp280.cpp

@@ -123,11 +123,11 @@ inline uint8_t oversampling_to_time(BMP280Oversampling over_sampling) { return (
 void BMP280Component::update() {
   // Enable sensor
   ESP_LOGV(TAG, "Sending conversion request...");
-  uint8_t meas_register = 0;
-  meas_register |= (this->temperature_oversampling_ & 0b111) << 5;
-  meas_register |= (this->pressure_oversampling_ & 0b111) << 2;
-  meas_register |= 0b01;  // Forced mode
-  if (!this->write_byte(BMP280_REGISTER_CONTROL, meas_register)) {
+  uint8_t meas_value = 0;
+  meas_value |= (this->temperature_oversampling_ & 0b111) << 5;
+  meas_value |= (this->pressure_oversampling_ & 0b111) << 2;
+  meas_value |= 0b01;  // Forced mode
+  if (!this->write_byte(BMP280_REGISTER_CONTROL, meas_value)) {
     this->status_set_warning();
     return;
   }

esphome/components/display/display_buffer.cpp

@@ -514,9 +514,7 @@ Color Animation::get_grayscale_pixel(int x, int y) const {
   return Color(gray | gray << 8 | gray << 16 | gray << 24);
 }
 Animation::Animation(const uint8_t *data_start, int width, int height, uint32_t animation_frame_count, ImageType type)
-    : Image(data_start, width, height, type), animation_frame_count_(animation_frame_count) {
-  current_frame_ = 0;
-}
+    : Image(data_start, width, height, type), current_frame_(0), animation_frame_count_(animation_frame_count) {}
 int Animation::get_animation_frame_count() const { return this->animation_frame_count_; }
 int Animation::get_current_frame() const { return this->current_frame_; }
 void Animation::next_frame() {

esphome/components/i2c/i2c.cpp

@@ -16,7 +16,7 @@ I2CComponent::I2CComponent() {
     this->wire_ = new TwoWire(next_i2c_bus_num_);
   next_i2c_bus_num_++;
 #else
-  this->wire_ = &Wire;
+  this->wire_ = &Wire;  // NOLINT(cppcoreguidelines-prefer-member-initializer)
 #endif
 }
 

esphome/components/mcp3008/mcp3008.cpp

@@ -38,9 +38,8 @@ float MCP3008::read_data(uint8_t pin) {
 }
 
 MCP3008Sensor::MCP3008Sensor(MCP3008 *parent, const std::string &name, uint8_t pin, float reference_voltage)
-    : PollingComponent(1000), parent_(parent), pin_(pin) {
+    : PollingComponent(1000), parent_(parent), pin_(pin), reference_voltage_(reference_voltage) {
   this->set_name(name);
-  this->reference_voltage_ = reference_voltage;
 }
 
 float MCP3008Sensor::get_setup_priority() const { return setup_priority::DATA; }

esphome/components/mqtt/mqtt_client.cpp

@@ -25,7 +25,7 @@ MQTTClientComponent::MQTTClientComponent() {
 // Connection
 void MQTTClientComponent::setup() {
   ESP_LOGCONFIG(TAG, "Setting up MQTT...");
-  this->mqtt_client_.onMessage([this](char *topic, char *payload, AsyncMqttClientMessageProperties properties,
+  this->mqtt_client_.onMessage([this](char const *topic, char *payload, AsyncMqttClientMessageProperties properties,
                                       size_t len, size_t index, size_t total) {
     if (index == 0)
       this->payload_buffer_.reserve(total);

esphome/components/remote_base/rc5_protocol.cpp

@@ -41,7 +41,7 @@ optional<RC5Data> RC5Protocol::decode(RemoteReceiveData src) {
       .address = 0,
       .command = 0,
   };
-  int field_bit = 0;
+  uint8_t field_bit;
 
   if (src.expect_space(BIT_TIME_US) && src.expect_mark(BIT_TIME_US)) {
     field_bit = 1;
@@ -60,7 +60,7 @@ optional<RC5Data> RC5Protocol::decode(RemoteReceiveData src) {
     return {};
   }
 
-  uint64_t out_data = 0;
+  uint32_t out_data = 0;
   for (int bit = NBITS - 4; bit >= 1; bit--) {
     if ((src.expect_space(BIT_TIME_US) || src.expect_space(2 * BIT_TIME_US)) &&
         (src.expect_mark(BIT_TIME_US) || src.peek_mark(2 * BIT_TIME_US))) {
@@ -78,7 +78,7 @@ optional<RC5Data> RC5Protocol::decode(RemoteReceiveData src) {
     out_data |= 1;
   }
 
-  out.command = (out_data & 0x3F) + (1 - field_bit) * 64;
+  out.command = (uint8_t)(out_data & 0x3F) + (1 - field_bit) * 64u;
   out.address = (out_data >> 6) & 0x1F;
   return out;
 }

esphome/components/st7735/st7735.cpp

@@ -220,15 +220,14 @@ static const uint8_t PROGMEM
 // clang-format on
 static const char *const TAG = "st7735";
 
-ST7735::ST7735(ST7735Model model, int width, int height, int colstart, int rowstart, bool eightbitcolor, bool usebgr) {
-  model_ = model;
-  this->width_ = width;
-  this->height_ = height;
-  this->colstart_ = colstart;
-  this->rowstart_ = rowstart;
-  this->eightbitcolor_ = eightbitcolor;
-  this->usebgr_ = usebgr;
-}
+ST7735::ST7735(ST7735Model model, int width, int height, int colstart, int rowstart, bool eightbitcolor, bool usebgr)
+    : model_(model),
+      colstart_(colstart),
+      rowstart_(rowstart),
+      eightbitcolor_(eightbitcolor),
+      usebgr_(usebgr),
+      width_(width),
+      height_(height) {}
 
 void ST7735::setup() {
   ESP_LOGCONFIG(TAG, "Setting up ST7735...");

esphome/components/sun/sun.cpp

@@ -79,10 +79,8 @@ struct SunAtTime {
   num_t jde;
   num_t t;
 
-  SunAtTime(num_t jde) : jde(jde) {
   // eq 25.1, p. 163; julian centuries from the epoch J2000.0
-    t = (jde - 2451545) / 36525.0;
-  }
+  SunAtTime(num_t jde) : jde(jde), t((jde - 2451545) / 36525.0) {}
 
   num_t mean_obliquity() const {
     // eq. 22.2, p. 147; mean obliquity of the ecliptic

esphome/core/component.cpp

@@ -196,10 +196,8 @@ uint32_t Nameable::get_object_id_hash() { return this->object_id_hash_; }
 bool Nameable::is_disabled_by_default() const { return this->disabled_by_default_; }
 void Nameable::set_disabled_by_default(bool disabled_by_default) { this->disabled_by_default_ = disabled_by_default; }
 
-WarnIfComponentBlockingGuard::WarnIfComponentBlockingGuard(Component *component) {
-  component_ = component;
-  started_ = millis();
-}
+WarnIfComponentBlockingGuard::WarnIfComponentBlockingGuard(Component *component)
+    : started_(millis()), component_(component) {}
 WarnIfComponentBlockingGuard::~WarnIfComponentBlockingGuard() {
   uint32_t now = millis();
   if (now - started_ > 50) {

esphome/core/preferences.cpp

@@ -20,7 +20,7 @@ static const char *const TAG = "preferences";
 ESPPreferenceObject::ESPPreferenceObject() : offset_(0), length_words_(0), type_(0), data_(nullptr) {}
 ESPPreferenceObject::ESPPreferenceObject(size_t offset, size_t length, uint32_t type)
     : offset_(offset), length_words_(length), type_(type) {
-  this->data_ = new uint32_t[this->length_words_ + 1];
+  this->data_ = new uint32_t[this->length_words_ + 1];  // NOLINT(cppcoreguidelines-prefer-member-initializer)
   for (uint32_t i = 0; i < this->length_words_ + 1; i++)
     this->data_[i] = 0;
 }
@@ -69,7 +69,7 @@ static inline bool esp_rtc_user_mem_read(uint32_t index, uint32_t *dest) {
   if (index >= ESP_RTC_USER_MEM_SIZE_WORDS) {
     return false;
   }
-  *dest = ESP_RTC_USER_MEM[index];
+  *dest = ESP_RTC_USER_MEM[index];  // NOLINT(performance-no-int-to-ptr)
   return true;
 }
 
@@ -83,7 +83,7 @@ static inline bool esp_rtc_user_mem_write(uint32_t index, uint32_t value) {
     return false;
   }
 
-  auto *ptr = &ESP_RTC_USER_MEM[index];
+  auto *ptr = &ESP_RTC_USER_MEM[index];  // NOLINT(performance-no-int-to-ptr)
   *ptr = value;
   return true;
 }