Merge pull request #5474 from esphome/bump-2023.9.3

2023.9.3

esphome/components/bp5758d/bp5758d.cpp

@@ -39,10 +39,14 @@ void BP5758D::loop() {
   uint8_t data[17];
   if (this->pwm_amounts_[0] == 0 && this->pwm_amounts_[1] == 0 && this->pwm_amounts_[2] == 0 &&
       this->pwm_amounts_[3] == 0 && this->pwm_amounts_[4] == 0) {
-    // Off / Sleep
-    data[0] = BP5758D_MODEL_ID + BP5758D_ADDR_STANDBY;
     for (int i = 1; i < 16; i++)
       data[i] = 0;
+
+    // First turn all channels off
+    data[0] = BP5758D_MODEL_ID + BP5758D_ADDR_START_3CH;
+    this->write_buffer_(data, 17);
+    // Then sleep
+    data[0] = BP5758D_MODEL_ID + BP5758D_ADDR_STANDBY;
     this->write_buffer_(data, 17);
   } else if (this->pwm_amounts_[0] == 0 && this->pwm_amounts_[1] == 0 && this->pwm_amounts_[2] == 0 &&
              (this->pwm_amounts_[3] > 0 || this->pwm_amounts_[4] > 0)) {

esphome/components/esp32/boards.py

@@ -235,6 +235,7 @@ ESP32_BOARD_PINS = {
         "SDA": 5,
         "SS": 15,
     },
+    "denky_d4": {"RX": 8, "LED": 14},
     "esp-wrover-kit": {},
     "esp32-devkitlipo": {},
     "esp32-evb": {

esphome/components/spi/__init__.py

@@ -54,6 +54,21 @@ CONF_FORCE_SW = "force_sw"
 CONF_INTERFACE = "interface"
 CONF_INTERFACE_INDEX = "interface_index"
 
+# RP2040 SPI pin assignments are complicated. Refer to https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf
+
+RP_SPI_PINSETS = [
+    {
+        CONF_MISO_PIN: [0, 4, 16, 20, -1],
+        CONF_CLK_PIN: [2, 6, 18, 22],
+        CONF_MOSI_PIN: [3, 7, 19, 23, -1],
+    },
+    {
+        CONF_MISO_PIN: [8, 12, 24, 28, -1],
+        CONF_CLK_PIN: [10, 14, 26],
+        CONF_MOSI_PIN: [11, 23, 27, -1],
+    },
+]
+
 
 def get_target_platform():
     return (
@@ -85,7 +100,7 @@ def get_hw_interface_list():
             return [["spi", "spi2"]]
         return [["spi", "spi2"], ["spi3"]]
     if target_platform == "rp2040":
-        return [["spi"]]
+        return [["spi"], ["spi1"]]
     return []
 
 
@@ -99,8 +114,10 @@ def get_spi_index(name):
 
 
 # Check that pins are suitable for HW spi
+# \param spi the config data for the spi instance
+# \param index the selected hw interface number, -1 if not yet known
 # TODO verify that the pins are internal
-def validate_hw_pins(spi):
+def validate_hw_pins(spi, index=-1):
     clk_pin = spi[CONF_CLK_PIN]
     if clk_pin[CONF_INVERTED]:
         return False
@@ -129,9 +146,30 @@ def validate_hw_pins(spi):
     if target_platform == "esp32":
         return clk_pin_no >= 0
 
+    if target_platform == "rp2040":
+        pin_set = (
+            list(filter(lambda s: clk_pin_no in s[CONF_CLK_PIN], RP_SPI_PINSETS))[0]
+            if index == -1
+            else RP_SPI_PINSETS[index]
+        )
+        if pin_set is None:
+            return False
+        if sdo_pin_no not in pin_set[CONF_MOSI_PIN]:
+            return False
+        if sdi_pin_no not in pin_set[CONF_MISO_PIN]:
+            return False
+        return True
     return False
 
 
+def get_hw_spi(config, available):
+    """Get an available hardware spi interface suitable for this config"""
+    matching = list(filter(lambda idx: validate_hw_pins(config, idx), available))
+    if len(matching) != 0:
+        return matching[0]
+    return None
+
+
 def validate_spi_config(config):
     available = list(range(len(get_hw_interface_list())))
     for spi in config:
@@ -147,9 +185,10 @@ def validate_spi_config(config):
             if not validate_hw_pins(spi):
                 spi[CONF_INTERFACE] = "software"
         elif interface == "hardware":
-            if len(available) == 0:
+            index = get_hw_spi(spi, available)
-                raise cv.Invalid("No hardware interface available")
+            if index is None:
-            index = spi[CONF_INTERFACE_INDEX] = available[0]
+                raise cv.Invalid("No suitable hardware interface available")
+            spi[CONF_INTERFACE_INDEX] = index
             available.remove(index)
         else:
             # Must be a specific name
@@ -164,11 +203,14 @@ def validate_spi_config(config):
     # Any specific names and any 'hardware' requests will have already been filled,
     # so just need to assign remaining hardware to 'any' requests.
     for spi in config:
-        if spi[CONF_INTERFACE] == "any" and len(available) != 0:
+        if spi[CONF_INTERFACE] == "any":
-            index = available[0]
+            index = get_hw_spi(spi, available)
-            spi[CONF_INTERFACE_INDEX] = index
+            if index is not None:
-            available.remove(index)
+                spi[CONF_INTERFACE_INDEX] = index
-        if CONF_INTERFACE_INDEX in spi and not validate_hw_pins(spi):
+                available.remove(index)
+        if CONF_INTERFACE_INDEX in spi and not validate_hw_pins(
+            spi, spi[CONF_INTERFACE_INDEX]
+        ):
             raise cv.Invalid("Invalid pin selections for hardware SPI interface")
 
     return config
@@ -181,7 +223,7 @@ def get_spi_interface(index):
     # Arduino code follows
     platform = get_target_platform()
     if platform == "rp2040":
-        return "&spi1"
+        return ["&SPI", "&SPI1"][index]
     if index == 0:
         return "&SPI"
     # Following code can't apply to C2, H2 or 8266 since they have only one SPI

esphome/components/tuya/number/__init__.py

@@ -6,6 +6,7 @@ from esphome.const import (
     CONF_NUMBER_DATAPOINT,
     CONF_MAX_VALUE,
     CONF_MIN_VALUE,
+    CONF_MULTIPLY,
     CONF_STEP,
 )
 from .. import tuya_ns, CONF_TUYA_ID, Tuya
@@ -31,6 +32,7 @@ CONFIG_SCHEMA = cv.All(
             cv.Required(CONF_MAX_VALUE): cv.float_,
             cv.Required(CONF_MIN_VALUE): cv.float_,
             cv.Required(CONF_STEP): cv.positive_float,
+            cv.Optional(CONF_MULTIPLY, default=1.0): cv.float_,
         }
     )
     .extend(cv.COMPONENT_SCHEMA),
@@ -49,7 +51,8 @@ async def to_code(config):
         step=config[CONF_STEP],
     )
 
-    paren = await cg.get_variable(config[CONF_TUYA_ID])
+    cg.add(var.set_write_multiply(config[CONF_MULTIPLY]))
-    cg.add(var.set_tuya_parent(paren))
+    parent = await cg.get_variable(config[CONF_TUYA_ID])
+    cg.add(var.set_tuya_parent(parent))
 
     cg.add(var.set_number_id(config[CONF_NUMBER_DATAPOINT]))

esphome/components/tuya/number/tuya_number.cpp

@@ -10,7 +10,7 @@ void TuyaNumber::setup() {
   this->parent_->register_listener(this->number_id_, [this](const TuyaDatapoint &datapoint) {
     if (datapoint.type == TuyaDatapointType::INTEGER) {
       ESP_LOGV(TAG, "MCU reported number %u is: %d", datapoint.id, datapoint.value_int);
-      this->publish_state(datapoint.value_int * this->traits.get_step());
+      this->publish_state(datapoint.value_int / multiply_by_);
     } else if (datapoint.type == TuyaDatapointType::ENUM) {
       ESP_LOGV(TAG, "MCU reported number %u is: %u", datapoint.id, datapoint.value_enum);
       this->publish_state(datapoint.value_enum);
@@ -22,7 +22,7 @@ void TuyaNumber::setup() {
 void TuyaNumber::control(float value) {
   ESP_LOGV(TAG, "Setting number %u: %f", this->number_id_, value);
   if (this->type_ == TuyaDatapointType::INTEGER) {
-    int integer_value = lround(value / this->traits.get_step());
+    int integer_value = lround(value * multiply_by_);
     this->parent_->set_integer_datapoint_value(this->number_id_, integer_value);
   } else if (this->type_ == TuyaDatapointType::ENUM) {
     this->parent_->set_enum_datapoint_value(this->number_id_, value);

esphome/components/tuya/number/tuya_number.h

@@ -12,6 +12,7 @@ class TuyaNumber : public number::Number, public Component {
   void setup() override;
   void dump_config() override;
   void set_number_id(uint8_t number_id) { this->number_id_ = number_id; }
+  void set_write_multiply(float factor) { multiply_by_ = factor; }
 
   void set_tuya_parent(Tuya *parent) { this->parent_ = parent; }
 
@@ -20,6 +21,7 @@ class TuyaNumber : public number::Number, public Component {
 
   Tuya *parent_;
   uint8_t number_id_{0};
+  float multiply_by_{1.0};
   TuyaDatapointType type_{};
 };
 

esphome/const.py

@@ -1,6 +1,6 @@
 """Constants used by esphome."""
 
-__version__ = "2023.9.2"
+__version__ = "2023.9.3"
 
 ALLOWED_NAME_CHARS = "abcdefghijklmnopqrstuvwxyz0123456789-_"
 VALID_SUBSTITUTIONS_CHARACTERS = (

requirements.txt

@@ -11,7 +11,7 @@ esptool==4.6.2
 click==8.1.7
 esphome-dashboard==20230904.0
 aioesphomeapi==15.0.0
-zeroconf==0.112.0
+zeroconf==0.115.1
 
 # esp-idf requires this, but doesn't bundle it by default
 # https://github.com/espressif/esp-idf/blob/220590d599e134d7a5e7f1e683cc4550349ffbf8/requirements.txt#L24

tests/test6.yaml

@@ -39,6 +39,14 @@ switch:
     output: pin_4
     id: pin_4_switch
 
+
+spi:  # Pins are for SPI1 on the RP2040 Pico-W
+  miso_pin: 8
+  clk_pin: 10
+  mosi_pin: 11
+  id: spi_0
+  interface: hardware
+
 #light:
 #  - platform: rp2040_pio_led_strip
 #    id: led_strip