Merge branch 'dev' into nrf52_core

CODEOWNERS

@@ -166,6 +166,7 @@ esphome/components/haier/* @paveldn
 esphome/components/haier/binary_sensor/* @paveldn
 esphome/components/haier/button/* @paveldn
 esphome/components/haier/sensor/* @paveldn
+esphome/components/haier/switch/* @paveldn
 esphome/components/haier/text_sensor/* @paveldn
 esphome/components/havells_solar/* @sourabhjaiswal
 esphome/components/hbridge/fan/* @WeekendWarrior
@@ -398,6 +399,7 @@ esphome/components/sun_gtil2/* @Mat931
 esphome/components/switch/* @esphome/core
 esphome/components/t6615/* @tylermenezes
 esphome/components/tca9548a/* @andreashergert1984
+esphome/components/tca9555/* @mobrembski
 esphome/components/tcl112/* @glmnet
 esphome/components/tee501/* @Stock-M
 esphome/components/teleinfo/* @0hax

esphome/components/ethernet/__init__.py

@@ -59,6 +59,7 @@ ETHERNET_TYPES = {
     "KSZ8081": EthernetType.ETHERNET_TYPE_KSZ8081,
     "KSZ8081RNA": EthernetType.ETHERNET_TYPE_KSZ8081RNA,
     "W5500": EthernetType.ETHERNET_TYPE_W5500,
+    "OPENETH": EthernetType.ETHERNET_TYPE_OPENETH,
 }
 
 SPI_ETHERNET_TYPES = ["W5500"]
@@ -171,6 +172,7 @@ CONFIG_SCHEMA = cv.All(
             "KSZ8081": RMII_SCHEMA,
             "KSZ8081RNA": RMII_SCHEMA,
             "W5500": SPI_SCHEMA,
+            "OPENETH": BASE_SCHEMA,
         },
         upper=True,
     ),
@@ -240,6 +242,9 @@ async def to_code(config):
         if CORE.using_esp_idf:
             add_idf_sdkconfig_option("CONFIG_ETH_USE_SPI_ETHERNET", True)
             add_idf_sdkconfig_option("CONFIG_ETH_SPI_ETHERNET_W5500", True)
+    elif config[CONF_TYPE] == "OPENETH":
+        cg.add_define("USE_ETHERNET_OPENETH")
+        add_idf_sdkconfig_option("CONFIG_ETH_USE_OPENETH", True)
     else:
         cg.add(var.set_phy_addr(config[CONF_PHY_ADDR]))
         cg.add(var.set_mdc_pin(config[CONF_MDC_PIN]))

esphome/components/ethernet/ethernet_component.cpp

@@ -120,6 +120,8 @@ void EthernetComponent::setup() {
   phy_config.reset_gpio_num = this->reset_pin_;
 
   esp_eth_mac_t *mac = esp_eth_mac_new_w5500(&w5500_config, &mac_config);
+#elif defined(USE_ETHERNET_OPENETH)
+  esp_eth_mac_t *mac = esp_eth_mac_new_openeth(&mac_config);
 #else
   phy_config.phy_addr = this->phy_addr_;
   phy_config.reset_gpio_num = this->power_pin_;
@@ -143,6 +145,13 @@ void EthernetComponent::setup() {
 #endif
 
   switch (this->type_) {
+#ifdef USE_ETHERNET_OPENETH
+    case ETHERNET_TYPE_OPENETH: {
+      phy_config.autonego_timeout_ms = 1000;
+      this->phy_ = esp_eth_phy_new_dp83848(&phy_config);
+      break;
+    }
+#endif
 #if CONFIG_ETH_USE_ESP32_EMAC
     case ETHERNET_TYPE_LAN8720: {
       this->phy_ = esp_eth_phy_new_lan87xx(&phy_config);
@@ -302,6 +311,10 @@ void EthernetComponent::dump_config() {
       eth_type = "W5500";
       break;
 
+    case ETHERNET_TYPE_OPENETH:
+      eth_type = "OPENETH";
+      break;
+
     default:
       eth_type = "Unknown";
       break;

esphome/components/ethernet/ethernet_component.h

@@ -25,6 +25,7 @@ enum EthernetType {
   ETHERNET_TYPE_KSZ8081,
   ETHERNET_TYPE_KSZ8081RNA,
   ETHERNET_TYPE_W5500,
+  ETHERNET_TYPE_OPENETH,
 };
 
 struct ManualIP {

esphome/components/gpio_expander/cached_gpio.h

@@ -0,0 +1,38 @@
+#pragma once
+
+#include <array>
+#include <cstdint>
+#include "esphome/core/hal.h"
+
+namespace esphome {
+namespace gpio_expander {
+
+/// @brief A class to cache the read state of a GPIO expander.
+template<typename T, T N> class CachedGpioExpander {
+ public:
+  bool digital_read(T pin) {
+    if (!this->read_cache_invalidated_[pin]) {
+      this->read_cache_invalidated_[pin] = true;
+      return this->digital_read_cache(pin);
+    }
+    return this->digital_read_hw(pin);
+  }
+
+  void digital_write(T pin, bool value) { this->digital_write_hw(pin, value); }
+
+ protected:
+  virtual bool digital_read_hw(T pin) = 0;
+  virtual bool digital_read_cache(T pin) = 0;
+  virtual void digital_write_hw(T pin, bool value) = 0;
+
+  void reset_pin_cache_() {
+    for (T i = 0; i < N; i++) {
+      this->read_cache_invalidated_[i] = false;
+    }
+  }
+
+  std::array<bool, N> read_cache_invalidated_{};
+};
+
+}  // namespace gpio_expander
+}  // namespace esphome

esphome/components/haier/climate.py

@@ -114,7 +114,6 @@ SUPPORTED_CLIMATE_PRESETS_SMARTAIR2_OPTIONS = {
 SUPPORTED_CLIMATE_PRESETS_HON_OPTIONS = {
     "AWAY": ClimatePreset.CLIMATE_PRESET_AWAY,
     "BOOST": ClimatePreset.CLIMATE_PRESET_BOOST,
-    "ECO": ClimatePreset.CLIMATE_PRESET_ECO,
     "SLEEP": ClimatePreset.CLIMATE_PRESET_SLEEP,
 }
 
@@ -240,7 +239,9 @@ CONFIG_SCHEMA = cv.All(
                     ): cv.ensure_list(
                         cv.enum(SUPPORTED_HON_CONTROL_METHODS, upper=True)
                     ),
-                    cv.Optional(CONF_BEEPER, default=True): cv.boolean,
+                    cv.Optional(CONF_BEEPER): cv.invalid(
+                        f"The {CONF_BEEPER} option is deprecated, use beeper_on/beeper_off actions or beeper switch for a haier platform instead"
+                    ),
                     cv.Optional(
                         CONF_CONTROL_PACKET_SIZE, default=PROTOCOL_CONTROL_PACKET_SIZE
                     ): cv.int_range(min=PROTOCOL_CONTROL_PACKET_SIZE, max=50),
@@ -254,7 +255,7 @@ CONFIG_SCHEMA = cv.All(
                     ): cv.int_range(min=PROTOCOL_STATUS_MESSAGE_HEADER_SIZE),
                     cv.Optional(
                         CONF_SUPPORTED_PRESETS,
-                        default=["BOOST", "ECO", "SLEEP"],  # No AWAY by default
+                        default=["BOOST", "SLEEP"],  # No AWAY by default
                     ): cv.ensure_list(
                         cv.enum(SUPPORTED_CLIMATE_PRESETS_HON_OPTIONS, upper=True)
                     ),

esphome/components/haier/haier_base.cpp

@@ -52,8 +52,6 @@ bool check_timeout(std::chrono::steady_clock::time_point now, std::chrono::stead
 HaierClimateBase::HaierClimateBase()
     : haier_protocol_(*this),
       protocol_phase_(ProtocolPhases::SENDING_INIT_1),
-      display_status_(true),
-      health_mode_(false),
       force_send_control_(false),
       forced_request_status_(false),
       reset_protocol_request_(false),
@@ -127,21 +125,34 @@ haier_protocol::HaierMessage HaierClimateBase::get_wifi_signal_message_() {
 }
 #endif
 
-bool HaierClimateBase::get_display_state() const { return this->display_status_; }
+void HaierClimateBase::save_settings() {
+  HaierBaseSettings settings{this->get_health_mode(), this->get_display_state()};
+  if (!this->base_rtc_.save(&settings)) {
+    ESP_LOGW(TAG, "Failed to save settings");
+  }
+}
+
+bool HaierClimateBase::get_display_state() const {
+  return (this->display_status_ == SwitchState::ON) || (this->display_status_ == SwitchState::PENDING_ON);
+}
 
 void HaierClimateBase::set_display_state(bool state) {
-  if (this->display_status_ != state) {
+  if (state != this->get_display_state()) {
-    this->display_status_ = state;
+    this->display_status_ = state ? SwitchState::PENDING_ON : SwitchState::PENDING_OFF;
     this->force_send_control_ = true;
+    this->save_settings();
   }
 }
 
-bool HaierClimateBase::get_health_mode() const { return this->health_mode_; }
+bool HaierClimateBase::get_health_mode() const {
+  return (this->health_mode_ == SwitchState::ON) || (this->health_mode_ == SwitchState::PENDING_ON);
+}
 
 void HaierClimateBase::set_health_mode(bool state) {
-  if (this->health_mode_ != state) {
+  if (state != this->get_health_mode()) {
-    this->health_mode_ = state;
+    this->health_mode_ = state ? SwitchState::PENDING_ON : SwitchState::PENDING_OFF;
     this->force_send_control_ = true;
+    this->save_settings();
   }
 }
 
@@ -287,6 +298,14 @@ void HaierClimateBase::loop() {
   }
   this->process_phase(now);
   this->haier_protocol_.loop();
+#ifdef USE_SWITCH
+  if ((this->display_switch_ != nullptr) && (this->display_switch_->state != this->get_display_state())) {
+    this->display_switch_->publish_state(this->get_display_state());
+  }
+  if ((this->health_mode_switch_ != nullptr) && (this->health_mode_switch_->state != this->get_health_mode())) {
+    this->health_mode_switch_->publish_state(this->get_health_mode());
+  }
+#endif  // USE_SWITCH
 }
 
 void HaierClimateBase::process_protocol_reset() {
@@ -329,6 +348,26 @@ bool HaierClimateBase::prepare_pending_action() {
 
 ClimateTraits HaierClimateBase::traits() { return traits_; }
 
+void HaierClimateBase::initialization() {
+  constexpr uint32_t restore_settings_version = 0xA77D21EF;
+  this->base_rtc_ =
+      global_preferences->make_preference<HaierBaseSettings>(this->get_object_id_hash() ^ restore_settings_version);
+  HaierBaseSettings recovered;
+  if (!this->base_rtc_.load(&recovered)) {
+    recovered = {false, true};
+  }
+  this->display_status_ = recovered.display_state ? SwitchState::PENDING_ON : SwitchState::PENDING_OFF;
+  this->health_mode_ = recovered.health_mode ? SwitchState::PENDING_ON : SwitchState::PENDING_OFF;
+#ifdef USE_SWITCH
+  if (this->display_switch_ != nullptr) {
+    this->display_switch_->publish_state(this->get_display_state());
+  }
+  if (this->health_mode_switch_ != nullptr) {
+    this->health_mode_switch_->publish_state(this->get_health_mode());
+  }
+#endif
+}
+
 void HaierClimateBase::control(const ClimateCall &call) {
   ESP_LOGD("Control", "Control call");
   if (!this->valid_connection()) {
@@ -353,6 +392,22 @@ void HaierClimateBase::control(const ClimateCall &call) {
   }
 }
 
+#ifdef USE_SWITCH
+void HaierClimateBase::set_display_switch(switch_::Switch *sw) {
+  this->display_switch_ = sw;
+  if ((this->display_switch_ != nullptr) && (this->valid_connection())) {
+    this->display_switch_->publish_state(this->get_display_state());
+  }
+}
+
+void HaierClimateBase::set_health_mode_switch(switch_::Switch *sw) {
+  this->health_mode_switch_ = sw;
+  if ((this->health_mode_switch_ != nullptr) && (this->valid_connection())) {
+    this->health_mode_switch_->publish_state(this->get_health_mode());
+  }
+}
+#endif
+
 void HaierClimateBase::HvacSettings::reset() {
   this->valid = false;
   this->mode.reset();

esphome/components/haier/haier_base.h

@@ -8,6 +8,10 @@
 // HaierProtocol
 #include <protocol/haier_protocol.h>
 
+#ifdef USE_SWITCH
+#include "esphome/components/switch/switch.h"
+#endif
+
 namespace esphome {
 namespace haier {
 
@@ -20,10 +24,24 @@ enum class ActionRequest : uint8_t {
   START_STERI_CLEAN = 5,  // only hOn
 };
 
+struct HaierBaseSettings {
+  bool health_mode;
+  bool display_state;
+};
+
 class HaierClimateBase : public esphome::Component,
                          public esphome::climate::Climate,
                          public esphome::uart::UARTDevice,
                          public haier_protocol::ProtocolStream {
+#ifdef USE_SWITCH
+ public:
+  void set_display_switch(switch_::Switch *sw);
+  void set_health_mode_switch(switch_::Switch *sw);
+
+ protected:
+  switch_::Switch *display_switch_{nullptr};
+  switch_::Switch *health_mode_switch_{nullptr};
+#endif
  public:
   HaierClimateBase();
   HaierClimateBase(const HaierClimateBase &) = delete;
@@ -82,7 +100,8 @@ class HaierClimateBase : public esphome::Component,
   virtual void process_phase(std::chrono::steady_clock::time_point now) = 0;
   virtual haier_protocol::HaierMessage get_control_message() = 0;          // NOLINT(readability-identifier-naming)
   virtual haier_protocol::HaierMessage get_power_message(bool state) = 0;  // NOLINT(readability-identifier-naming)
-  virtual void initialization(){};
+  virtual void save_settings();
+  virtual void initialization();
   virtual bool prepare_pending_action();
   virtual void process_protocol_reset();
   esphome::climate::ClimateTraits traits() override;
@@ -127,13 +146,19 @@ class HaierClimateBase : public esphome::Component,
     ActionRequest action;
     esphome::optional<haier_protocol::HaierMessage> message;
   };
+  enum class SwitchState {
+    OFF = 0b00,
+    ON = 0b01,
+    PENDING_OFF = 0b10,
+    PENDING_ON = 0b11,
+  };
   haier_protocol::ProtocolHandler haier_protocol_;
   ProtocolPhases protocol_phase_;
   esphome::optional<PendingAction> action_request_;
   uint8_t fan_mode_speed_;
   uint8_t other_modes_fan_speed_;
-  bool display_status_;
+  SwitchState display_status_{SwitchState::ON};
-  bool health_mode_;
+  SwitchState health_mode_{SwitchState::OFF};
   bool force_send_control_;
   bool forced_request_status_;
   bool reset_protocol_request_;
@@ -148,6 +173,7 @@ class HaierClimateBase : public esphome::Component,
   std::chrono::steady_clock::time_point last_status_request_;          // To request AC status
   std::chrono::steady_clock::time_point last_signal_request_;          // To send WiFI signal level
   CallbackManager<void(const char *, size_t)> status_message_callback_{};
+  ESPPreferenceObject base_rtc_;
 };
 
 class StatusMessageTrigger : public Trigger<const char *, size_t> {

esphome/components/haier/hon_climate.cpp

@@ -31,9 +31,32 @@ HonClimate::HonClimate()
 
 HonClimate::~HonClimate() {}
 
-void HonClimate::set_beeper_state(bool state) { this->beeper_status_ = state; }
+void HonClimate::set_beeper_state(bool state) {
+  if (state != this->settings_.beeper_state) {
+    this->settings_.beeper_state = state;
+#ifdef USE_SWITCH
+    this->beeper_switch_->publish_state(state);
+#endif
+    this->hon_rtc_.save(&this->settings_);
+  }
+}
 
-bool HonClimate::get_beeper_state() const { return this->beeper_status_; }
+bool HonClimate::get_beeper_state() const { return this->settings_.beeper_state; }
+
+void HonClimate::set_quiet_mode_state(bool state) {
+  if (state != this->get_quiet_mode_state()) {
+    this->quiet_mode_state_ = state ? SwitchState::PENDING_ON : SwitchState::PENDING_OFF;
+    this->settings_.quiet_mode_state = state;
+#ifdef USE_SWITCH
+    this->quiet_mode_switch_->publish_state(state);
+#endif
+    this->hon_rtc_.save(&this->settings_);
+  }
+}
+
+bool HonClimate::get_quiet_mode_state() const {
+  return (this->quiet_mode_state_ == SwitchState::ON) || (this->quiet_mode_state_ == SwitchState::PENDING_ON);
+}
 
 esphome::optional<hon_protocol::VerticalSwingMode> HonClimate::get_vertical_airflow() const {
   return this->current_vertical_swing_;
@@ -474,16 +497,19 @@ haier_protocol::HaierMessage HonClimate::get_power_message(bool state) {
 }
 
 void HonClimate::initialization() {
-  constexpr uint32_t restore_settings_version = 0xE834D8DCUL;
+  HaierClimateBase::initialization();
-  this->rtc_ = global_preferences->make_preference<HonSettings>(this->get_object_id_hash() ^ restore_settings_version);
+  constexpr uint32_t restore_settings_version = 0x57EB59DDUL;
+  this->hon_rtc_ =
+      global_preferences->make_preference<HonSettings>(this->get_object_id_hash() ^ restore_settings_version);
   HonSettings recovered;
-  if (this->rtc_.load(&recovered)) {
+  if (this->hon_rtc_.load(&recovered)) {
     this->settings_ = recovered;
   } else {
-    this->settings_ = {hon_protocol::VerticalSwingMode::CENTER, hon_protocol::HorizontalSwingMode::CENTER};
+    this->settings_ = {hon_protocol::VerticalSwingMode::CENTER, hon_protocol::HorizontalSwingMode::CENTER, true, false};
   }
   this->current_vertical_swing_ = this->settings_.last_vertiacal_swing;
   this->current_horizontal_swing_ = this->settings_.last_horizontal_swing;
+  this->quiet_mode_state_ = this->settings_.quiet_mode_state ? SwitchState::PENDING_ON : SwitchState::PENDING_OFF;
 }
 
 haier_protocol::HaierMessage HonClimate::get_control_message() {
@@ -519,8 +545,7 @@ haier_protocol::HaierMessage HonClimate::get_control_message() {
           out_data->ac_power = 1;
           out_data->ac_mode = (uint8_t) hon_protocol::ConditioningMode::FAN;
           out_data->fan_mode = this->fan_mode_speed_;  // Auto doesn't work in fan only mode
-          // Disabling boost and eco mode for Fan only
+          // Disabling boost for Fan only
-          out_data->quiet_mode = 0;
           out_data->fast_mode = 0;
           break;
         case CLIMATE_MODE_COOL:
@@ -582,47 +607,34 @@ haier_protocol::HaierMessage HonClimate::get_control_message() {
     }
     if (out_data->ac_power == 0) {
       // If AC is off - no presets allowed
-      out_data->quiet_mode = 0;
       out_data->fast_mode = 0;
       out_data->sleep_mode = 0;
     } else if (climate_control.preset.has_value()) {
       switch (climate_control.preset.value()) {
         case CLIMATE_PRESET_NONE:
-          out_data->quiet_mode = 0;
-          out_data->fast_mode = 0;
-          out_data->sleep_mode = 0;
-          out_data->ten_degree = 0;
-          break;
-        case CLIMATE_PRESET_ECO:
-          // Eco is not supported in Fan only mode
-          out_data->quiet_mode = (this->mode != CLIMATE_MODE_FAN_ONLY) ? 1 : 0;
           out_data->fast_mode = 0;
           out_data->sleep_mode = 0;
           out_data->ten_degree = 0;
           break;
         case CLIMATE_PRESET_BOOST:
-          out_data->quiet_mode = 0;
           // Boost is not supported in Fan only mode
           out_data->fast_mode = (this->mode != CLIMATE_MODE_FAN_ONLY) ? 1 : 0;
           out_data->sleep_mode = 0;
           out_data->ten_degree = 0;
           break;
         case CLIMATE_PRESET_AWAY:
-          out_data->quiet_mode = 0;
           out_data->fast_mode = 0;
           out_data->sleep_mode = 0;
           // 10 degrees allowed only in heat mode
           out_data->ten_degree = (this->mode == CLIMATE_MODE_HEAT) ? 1 : 0;
           break;
         case CLIMATE_PRESET_SLEEP:
-          out_data->quiet_mode = 0;
           out_data->fast_mode = 0;
           out_data->sleep_mode = 1;
           out_data->ten_degree = 0;
           break;
         default:
           ESP_LOGE("Control", "Unsupported preset");
-          out_data->quiet_mode = 0;
           out_data->fast_mode = 0;
           out_data->sleep_mode = 0;
           out_data->ten_degree = 0;
@@ -638,10 +650,23 @@ haier_protocol::HaierMessage HonClimate::get_control_message() {
     out_data->horizontal_swing_mode = (uint8_t) this->pending_horizontal_direction_.value();
     this->pending_horizontal_direction_.reset();
   }
-  out_data->beeper_status = ((!this->beeper_status_) || (!has_hvac_settings)) ? 1 : 0;
+  {
+    // Quiet mode
+    if ((out_data->ac_power == 0) || (out_data->ac_mode == (uint8_t) hon_protocol::ConditioningMode::FAN)) {
+      // If AC is off or in fan only mode - no quiet mode allowed
+      out_data->quiet_mode = 0;
+    } else {
+      out_data->quiet_mode = this->get_quiet_mode_state() ? 1 : 0;
+    }
+    // Clean quiet mode state pending flag
+    this->quiet_mode_state_ = (SwitchState) ((uint8_t) this->quiet_mode_state_ & 0b01);
+  }
+  out_data->beeper_status = ((!this->get_beeper_state()) || (!has_hvac_settings)) ? 1 : 0;
   control_out_buffer[4] = 0;  // This byte should be cleared before setting values
-  out_data->display_status = this->display_status_ ? 1 : 0;
+  out_data->display_status = this->get_display_state() ? 1 : 0;
-  out_data->health_mode = this->health_mode_ ? 1 : 0;
+  this->display_status_ = (SwitchState) ((uint8_t) this->display_status_ & 0b01);
+  out_data->health_mode = this->get_health_mode() ? 1 : 0;
+  this->health_mode_ = (SwitchState) ((uint8_t) this->health_mode_ & 0b01);
   return haier_protocol::HaierMessage(haier_protocol::FrameType::CONTROL,
                                       (uint16_t) hon_protocol::SubcommandsControl::SET_GROUP_PARAMETERS,
                                       control_out_buffer, this->real_control_packet_size_);
@@ -765,6 +790,22 @@ void HonClimate::update_sub_text_sensor_(SubTextSensorType type, const std::stri
 }
 #endif  // USE_TEXT_SENSOR
 
+#ifdef USE_SWITCH
+void HonClimate::set_beeper_switch(switch_::Switch *sw) {
+  this->beeper_switch_ = sw;
+  if (this->beeper_switch_ != nullptr) {
+    this->beeper_switch_->publish_state(this->get_beeper_state());
+  }
+}
+
+void HonClimate::set_quiet_mode_switch(switch_::Switch *sw) {
+  this->quiet_mode_switch_ = sw;
+  if (this->quiet_mode_switch_ != nullptr) {
+    this->quiet_mode_switch_->publish_state(this->settings_.quiet_mode_state);
+  }
+}
+#endif  // USE_SWITCH
+
 haier_protocol::HandlerError HonClimate::process_status_message_(const uint8_t *packet_buffer, uint8_t size) {
   size_t expected_size =
       2 + this->status_message_header_size_ + this->real_control_packet_size_ + this->real_sensors_packet_size_;
@@ -827,9 +868,7 @@ haier_protocol::HandlerError HonClimate::process_status_message_(const uint8_t *
   {
     // Extra modes/presets
     optional<ClimatePreset> old_preset = this->preset;
-    if (packet.control.quiet_mode != 0) {
+    if (packet.control.fast_mode != 0) {
-      this->preset = CLIMATE_PRESET_ECO;
-    } else if (packet.control.fast_mode != 0) {
       this->preset = CLIMATE_PRESET_BOOST;
     } else if (packet.control.sleep_mode != 0) {
       this->preset = CLIMATE_PRESET_SLEEP;
@@ -883,28 +922,26 @@ haier_protocol::HandlerError HonClimate::process_status_message_(const uint8_t *
     }
     should_publish = should_publish || (!old_fan_mode.has_value()) || (old_fan_mode.value() != fan_mode.value());
   }
-  {
   // Display status
   // should be before "Climate mode" because it is changing this->mode
   if (packet.control.ac_power != 0) {
     // if AC is off display status always ON so process it only when AC is on
     bool disp_status = packet.control.display_status != 0;
-      if (disp_status != this->display_status_) {
+    if (disp_status != this->get_display_state()) {
       // Do something only if display status changed
       if (this->mode == CLIMATE_MODE_OFF) {
         // AC just turned on from remote need to turn off display
         this->force_send_control_ = true;
-        } else {
+      } else if ((((uint8_t) this->health_mode_) & 0b10) == 0) {
-          this->display_status_ = disp_status;
+        this->display_status_ = disp_status ? SwitchState::ON : SwitchState::OFF;
       }
     }
   }
-  }
-  {
   // Health mode
-    bool old_health_mode = this->health_mode_;
+  if ((((uint8_t) this->health_mode_) & 0b10) == 0) {
-    this->health_mode_ = packet.control.health_mode == 1;
+    bool old_health_mode = this->get_health_mode();
-    should_publish = should_publish || (old_health_mode != this->health_mode_);
+    this->health_mode_ = packet.control.health_mode == 1 ? SwitchState::ON : SwitchState::OFF;
+    should_publish = should_publish || (old_health_mode != this->get_health_mode());
   }
   {
     CleaningState new_cleaning;
@@ -958,17 +995,36 @@ haier_protocol::HandlerError HonClimate::process_status_message_(const uint8_t *
     }
     should_publish = should_publish || (old_mode != this->mode);
   }
+  {
+    // Quiet mode, should be after climate mode
+    if ((this->mode != CLIMATE_MODE_FAN_ONLY) && (this->mode != CLIMATE_MODE_OFF) &&
+        ((((uint8_t) this->quiet_mode_state_) & 0b10) == 0)) {
+      // In proper mode and not in pending state
+      bool new_quiet_mode = packet.control.quiet_mode != 0;
+      if (new_quiet_mode != this->get_quiet_mode_state()) {
+        this->quiet_mode_state_ = new_quiet_mode ? SwitchState::ON : SwitchState::OFF;
+        this->settings_.quiet_mode_state = new_quiet_mode;
+        this->hon_rtc_.save(&this->settings_);
+      }
+    }
+  }
   {
     // Swing mode
     ClimateSwingMode old_swing_mode = this->swing_mode;
-    if (packet.control.horizontal_swing_mode == (uint8_t) hon_protocol::HorizontalSwingMode::AUTO) {
+    const std::set<ClimateSwingMode> &swing_modes = traits_.get_supported_swing_modes();
-      if (packet.control.vertical_swing_mode == (uint8_t) hon_protocol::VerticalSwingMode::AUTO) {
+    bool vertical_swing_supported = swing_modes.find(CLIMATE_SWING_VERTICAL) != swing_modes.end();
+    bool horizontal_swing_supported = swing_modes.find(CLIMATE_SWING_HORIZONTAL) != swing_modes.end();
+    if (horizontal_swing_supported &&
+        (packet.control.horizontal_swing_mode == (uint8_t) hon_protocol::HorizontalSwingMode::AUTO)) {
+      if (vertical_swing_supported &&
+          (packet.control.vertical_swing_mode == (uint8_t) hon_protocol::VerticalSwingMode::AUTO)) {
         this->swing_mode = CLIMATE_SWING_BOTH;
       } else {
         this->swing_mode = CLIMATE_SWING_HORIZONTAL;
       }
     } else {
-      if (packet.control.vertical_swing_mode == (uint8_t) hon_protocol::VerticalSwingMode::AUTO) {
+      if (vertical_swing_supported &&
+          (packet.control.vertical_swing_mode == (uint8_t) hon_protocol::VerticalSwingMode::AUTO)) {
         this->swing_mode = CLIMATE_SWING_VERTICAL;
       } else {
         this->swing_mode = CLIMATE_SWING_OFF;
@@ -985,7 +1041,7 @@ haier_protocol::HandlerError HonClimate::process_status_message_(const uint8_t *
     if (save_settings) {
       this->settings_.last_vertiacal_swing = this->current_vertical_swing_.value();
       this->settings_.last_horizontal_swing = this->current_horizontal_swing_.value();
-      this->rtc_.save(&this->settings_);
+      this->hon_rtc_.save(&this->settings_);
     }
     should_publish = should_publish || (old_swing_mode != this->swing_mode);
   }
@@ -1017,7 +1073,7 @@ void HonClimate::fill_control_messages_queue_() {
         haier_protocol::HaierMessage(haier_protocol::FrameType::CONTROL,
                                      (uint16_t) hon_protocol::SubcommandsControl::SET_SINGLE_PARAMETER +
                                          (uint8_t) hon_protocol::DataParameters::BEEPER_STATUS,
-                                     this->beeper_status_ ? ZERO_BUF : ONE_BUF, 2));
+                                     this->get_beeper_state() ? ZERO_BUF : ONE_BUF, 2));
   }
   // Health mode
   {
@@ -1025,13 +1081,16 @@ void HonClimate::fill_control_messages_queue_() {
         haier_protocol::HaierMessage(haier_protocol::FrameType::CONTROL,
                                      (uint16_t) hon_protocol::SubcommandsControl::SET_SINGLE_PARAMETER +
                                          (uint8_t) hon_protocol::DataParameters::HEALTH_MODE,
-                                     this->health_mode_ ? ONE_BUF : ZERO_BUF, 2));
+                                     this->get_health_mode() ? ONE_BUF : ZERO_BUF, 2));
+    this->health_mode_ = (SwitchState) ((uint8_t) this->health_mode_ & 0b01);
   }
   // Climate mode
+  ClimateMode climate_mode = this->mode;
   bool new_power = this->mode != CLIMATE_MODE_OFF;
   uint8_t fan_mode_buf[] = {0x00, 0xFF};
   uint8_t quiet_mode_buf[] = {0x00, 0xFF};
   if (climate_control.mode.has_value()) {
+    climate_mode = climate_control.mode.value();
     uint8_t buffer[2] = {0x00, 0x00};
     switch (climate_control.mode.value()) {
       case CLIMATE_MODE_OFF:
@@ -1076,8 +1135,6 @@ void HonClimate::fill_control_messages_queue_() {
                                              (uint8_t) hon_protocol::DataParameters::AC_MODE,
                                          buffer, 2));
         fan_mode_buf[1] = this->other_modes_fan_speed_;  // Auto doesn't work in fan only mode
-        // Disabling eco mode for Fan only
-        quiet_mode_buf[1] = 0;
         break;
       case CLIMATE_MODE_COOL:
         new_power = true;
@@ -1108,30 +1165,20 @@ void HonClimate::fill_control_messages_queue_() {
     uint8_t away_mode_buf[] = {0x00, 0xFF};
     if (!new_power) {
       // If AC is off - no presets allowed
-      quiet_mode_buf[1] = 0x00;
       fast_mode_buf[1] = 0x00;
       away_mode_buf[1] = 0x00;
     } else if (climate_control.preset.has_value()) {
       switch (climate_control.preset.value()) {
         case CLIMATE_PRESET_NONE:
-          quiet_mode_buf[1] = 0x00;
-          fast_mode_buf[1] = 0x00;
-          away_mode_buf[1] = 0x00;
-          break;
-        case CLIMATE_PRESET_ECO:
-          // Eco is not supported in Fan only mode
-          quiet_mode_buf[1] = (this->mode != CLIMATE_MODE_FAN_ONLY) ? 0x01 : 0x00;
           fast_mode_buf[1] = 0x00;
           away_mode_buf[1] = 0x00;
           break;
         case CLIMATE_PRESET_BOOST:
-          quiet_mode_buf[1] = 0x00;
           // Boost is not supported in Fan only mode
           fast_mode_buf[1] = (this->mode != CLIMATE_MODE_FAN_ONLY) ? 0x01 : 0x00;
           away_mode_buf[1] = 0x00;
           break;
         case CLIMATE_PRESET_AWAY:
-          quiet_mode_buf[1] = 0x00;
           fast_mode_buf[1] = 0x00;
           away_mode_buf[1] = (this->mode == CLIMATE_MODE_HEAT) ? 0x01 : 0x00;
           break;
@@ -1140,8 +1187,18 @@ void HonClimate::fill_control_messages_queue_() {
           break;
       }
     }
+    {
+      // Quiet mode
+      if (new_power && (climate_mode != CLIMATE_MODE_FAN_ONLY) && this->get_quiet_mode_state()) {
+        quiet_mode_buf[1] = 0x01;
+      } else {
+        quiet_mode_buf[1] = 0x00;
+      }
+      // Clean quiet mode state pending flag
+      this->quiet_mode_state_ = (SwitchState) ((uint8_t) this->quiet_mode_state_ & 0b01);
+    }
     auto presets = this->traits_.get_supported_presets();
-    if ((quiet_mode_buf[1] != 0xFF) && ((presets.find(climate::ClimatePreset::CLIMATE_PRESET_ECO) != presets.end()))) {
+    if (quiet_mode_buf[1] != 0xFF) {
       this->control_messages_queue_.push(
           haier_protocol::HaierMessage(haier_protocol::FrameType::CONTROL,
                                        (uint16_t) hon_protocol::SubcommandsControl::SET_SINGLE_PARAMETER +

esphome/components/haier/hon_climate.h

@@ -10,6 +10,9 @@
 #ifdef USE_TEXT_SENSOR
 #include "esphome/components/text_sensor/text_sensor.h"
 #endif
+#ifdef USE_SWITCH
+#include "esphome/components/switch/switch.h"
+#endif
 #include "esphome/core/automation.h"
 #include "haier_base.h"
 #include "hon_packet.h"
@@ -28,6 +31,8 @@ enum class HonControlMethod { MONITOR_ONLY = 0, SET_GROUP_PARAMETERS, SET_SINGLE
 struct HonSettings {
   hon_protocol::VerticalSwingMode last_vertiacal_swing;
   hon_protocol::HorizontalSwingMode last_horizontal_swing;
+  bool beeper_state;
+  bool quiet_mode_state;
 };
 
 class HonClimate : public HaierClimateBase {
@@ -86,6 +91,15 @@ class HonClimate : public HaierClimateBase {
  protected:
   void update_sub_text_sensor_(SubTextSensorType type, const std::string &value);
   text_sensor::TextSensor *sub_text_sensors_[(size_t) SubTextSensorType::SUB_TEXT_SENSOR_TYPE_COUNT]{nullptr};
+#endif
+#ifdef USE_SWITCH
+ public:
+  void set_beeper_switch(switch_::Switch *sw);
+  void set_quiet_mode_switch(switch_::Switch *sw);
+
+ protected:
+  switch_::Switch *beeper_switch_{nullptr};
+  switch_::Switch *quiet_mode_switch_{nullptr};
 #endif
  public:
   HonClimate();
@@ -95,6 +109,8 @@ class HonClimate : public HaierClimateBase {
   void dump_config() override;
   void set_beeper_state(bool state);
   bool get_beeper_state() const;
+  void set_quiet_mode_state(bool state);
+  bool get_quiet_mode_state() const;
   esphome::optional<hon_protocol::VerticalSwingMode> get_vertical_airflow() const;
   void set_vertical_airflow(hon_protocol::VerticalSwingMode direction);
   esphome::optional<hon_protocol::HorizontalSwingMode> get_horizontal_airflow() const;
@@ -153,7 +169,6 @@ class HonClimate : public HaierClimateBase {
     bool functions_[5];
   };
 
-  bool beeper_status_;
   CleaningState cleaning_status_;
   bool got_valid_outdoor_temp_;
   esphome::optional<hon_protocol::VerticalSwingMode> pending_vertical_direction_{};
@@ -175,7 +190,8 @@ class HonClimate : public HaierClimateBase {
   esphome::optional<hon_protocol::VerticalSwingMode> current_vertical_swing_{};
   esphome::optional<hon_protocol::HorizontalSwingMode> current_horizontal_swing_{};
   HonSettings settings_;
-  ESPPreferenceObject rtc_;
+  ESPPreferenceObject hon_rtc_;
+  SwitchState quiet_mode_state_{SwitchState::OFF};
 };
 
 class HaierAlarmStartTrigger : public Trigger<uint8_t, const char *> {

esphome/components/haier/smartair2_climate.cpp

@@ -376,8 +376,10 @@ haier_protocol::HaierMessage Smartair2Climate::get_control_message() {
       }
     }
   }
-  out_data->display_status = this->display_status_ ? 0 : 1;
+  out_data->display_status = this->get_display_state() ? 0 : 1;
-  out_data->health_mode = this->health_mode_ ? 1 : 0;
+  this->display_status_ = (SwitchState) ((uint8_t) this->display_status_ & 0b01);
+  out_data->health_mode = this->get_health_mode() ? 1 : 0;
+  this->health_mode_ = (SwitchState) ((uint8_t) this->health_mode_ & 0b01);
   return haier_protocol::HaierMessage(haier_protocol::FrameType::CONTROL, 0x4D5F, control_out_buffer,
                                       sizeof(smartair2_protocol::HaierPacketControl));
 }
@@ -446,28 +448,26 @@ haier_protocol::HandlerError Smartair2Climate::process_status_message_(const uin
     }
     should_publish = should_publish || (!old_fan_mode.has_value()) || (old_fan_mode.value() != fan_mode.value());
   }
-  {
   // Display status
   // should be before "Climate mode" because it is changing this->mode
   if (packet.control.ac_power != 0) {
     // if AC is off display status always ON so process it only when AC is on
     bool disp_status = packet.control.display_status == 0;
-      if (disp_status != this->display_status_) {
+    if (disp_status != this->get_display_state()) {
       // Do something only if display status changed
       if (this->mode == CLIMATE_MODE_OFF) {
         // AC just turned on from remote need to turn off display
         this->force_send_control_ = true;
-        } else {
+      } else if ((((uint8_t) this->health_mode_) & 0b10) == 0) {
-          this->display_status_ = disp_status;
+        this->display_status_ = disp_status ? SwitchState::ON : SwitchState::OFF;
       }
     }
   }
-  }
-  {
   // Health mode
-    bool old_health_mode = this->health_mode_;
+  if ((((uint8_t) this->health_mode_) & 0b10) == 0) {
-    this->health_mode_ = packet.control.health_mode == 1;
+    bool old_health_mode = this->get_health_mode();
-    should_publish = should_publish || (old_health_mode != this->health_mode_);
+    this->health_mode_ = packet.control.health_mode == 1 ? SwitchState::ON : SwitchState::OFF;
+    should_publish = should_publish || (old_health_mode != this->get_health_mode());
   }
   {
     // Climate mode

esphome/components/haier/switch/__init__.py

@@ -0,0 +1,91 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+import esphome.final_validate as fv
+from esphome.components import switch
+from esphome.const import (
+    CONF_BEEPER,
+    CONF_DISPLAY,
+    ENTITY_CATEGORY_CONFIG,
+)
+from ..climate import (
+    CONF_HAIER_ID,
+    CONF_PROTOCOL,
+    HaierClimateBase,
+    haier_ns,
+    PROTOCOL_HON,
+)
+
+CODEOWNERS = ["@paveldn"]
+BeeperSwitch = haier_ns.class_("BeeperSwitch", switch.Switch)
+HealthModeSwitch = haier_ns.class_("HealthModeSwitch", switch.Switch)
+DisplaySwitch = haier_ns.class_("DisplaySwitch", switch.Switch)
+QuietModeSwitch = haier_ns.class_("QuietModeSwitch", switch.Switch)
+
+# Haier switches
+CONF_HEALTH_MODE = "health_mode"
+CONF_QUIET_MODE = "quiet_mode"
+
+# Additional icons
+ICON_LEAF = "mdi:leaf"
+ICON_LED_ON = "mdi:led-on"
+ICON_VOLUME_HIGH = "mdi:volume-high"
+ICON_VOLUME_OFF = "mdi:volume-off"
+
+CONFIG_SCHEMA = cv.Schema(
+    {
+        cv.GenerateID(CONF_HAIER_ID): cv.use_id(HaierClimateBase),
+        cv.Optional(CONF_DISPLAY): switch.switch_schema(
+            DisplaySwitch,
+            icon=ICON_LED_ON,
+            entity_category=ENTITY_CATEGORY_CONFIG,
+            default_restore_mode="DISABLED",
+        ),
+        cv.Optional(CONF_HEALTH_MODE): switch.switch_schema(
+            HealthModeSwitch,
+            icon=ICON_LEAF,
+            default_restore_mode="DISABLED",
+        ),
+        # Beeper switch is only supported for HonClimate
+        cv.Optional(CONF_BEEPER): switch.switch_schema(
+            BeeperSwitch,
+            icon=ICON_VOLUME_HIGH,
+            entity_category=ENTITY_CATEGORY_CONFIG,
+            default_restore_mode="DISABLED",
+        ),
+        # Quiet mode is only supported for HonClimate
+        cv.Optional(CONF_QUIET_MODE): switch.switch_schema(
+            QuietModeSwitch,
+            icon=ICON_VOLUME_OFF,
+            entity_category=ENTITY_CATEGORY_CONFIG,
+            default_restore_mode="DISABLED",
+        ),
+    }
+)
+
+
+def _final_validate(config):
+    full_config = fv.full_config.get()
+    for switch_type in [CONF_BEEPER, CONF_QUIET_MODE]:
+        # Check switches that are only supported for HonClimate
+        if config.get(switch_type):
+            climate_path = full_config.get_path_for_id(config[CONF_HAIER_ID])[:-1]
+            climate_conf = full_config.get_config_for_path(climate_path)
+            protocol_type = climate_conf.get(CONF_PROTOCOL)
+            if protocol_type.casefold() != PROTOCOL_HON.casefold():
+                raise cv.Invalid(
+                    f"{switch_type} switch is only supported for hon climate"
+                )
+    return config
+
+
+FINAL_VALIDATE_SCHEMA = _final_validate
+
+
+async def to_code(config):
+    parent = await cg.get_variable(config[CONF_HAIER_ID])
+
+    for switch_type in [CONF_DISPLAY, CONF_HEALTH_MODE, CONF_BEEPER, CONF_QUIET_MODE]:
+        if conf := config.get(switch_type):
+            sw_var = await switch.new_switch(conf)
+            await cg.register_parented(sw_var, parent)
+            cg.add(getattr(parent, f"set_{switch_type}_switch")(sw_var))

esphome/components/haier/switch/beeper.cpp

@@ -0,0 +1,14 @@
+#include "beeper.h"
+
+namespace esphome {
+namespace haier {
+
+void BeeperSwitch::write_state(bool state) {
+  if (this->parent_->get_beeper_state() != state) {
+    this->parent_->set_beeper_state(state);
+  }
+  this->publish_state(state);
+}
+
+}  // namespace haier
+}  // namespace esphome

esphome/components/haier/switch/beeper.h

@@ -0,0 +1,18 @@
+#pragma once
+
+#include "esphome/components/switch/switch.h"
+#include "../hon_climate.h"
+
+namespace esphome {
+namespace haier {
+
+class BeeperSwitch : public switch_::Switch, public Parented<HonClimate> {
+ public:
+  BeeperSwitch() = default;
+
+ protected:
+  void write_state(bool state) override;
+};
+
+}  // namespace haier
+}  // namespace esphome

esphome/components/haier/switch/display.cpp

@@ -0,0 +1,14 @@
+#include "display.h"
+
+namespace esphome {
+namespace haier {
+
+void DisplaySwitch::write_state(bool state) {
+  if (this->parent_->get_display_state() != state) {
+    this->parent_->set_display_state(state);
+  }
+  this->publish_state(state);
+}
+
+}  // namespace haier
+}  // namespace esphome

esphome/components/haier/switch/display.h

@@ -0,0 +1,18 @@
+#pragma once
+
+#include "esphome/components/switch/switch.h"
+#include "../haier_base.h"
+
+namespace esphome {
+namespace haier {
+
+class DisplaySwitch : public switch_::Switch, public Parented<HaierClimateBase> {
+ public:
+  DisplaySwitch() = default;
+
+ protected:
+  void write_state(bool state) override;
+};
+
+}  // namespace haier
+}  // namespace esphome

esphome/components/haier/switch/health_mode.cpp

@@ -0,0 +1,14 @@
+#include "health_mode.h"
+
+namespace esphome {
+namespace haier {
+
+void HealthModeSwitch::write_state(bool state) {
+  if (this->parent_->get_health_mode() != state) {
+    this->parent_->set_health_mode(state);
+  }
+  this->publish_state(state);
+}
+
+}  // namespace haier
+}  // namespace esphome

esphome/components/haier/switch/health_mode.h

@@ -0,0 +1,18 @@
+#pragma once
+
+#include "esphome/components/switch/switch.h"
+#include "../haier_base.h"
+
+namespace esphome {
+namespace haier {
+
+class HealthModeSwitch : public switch_::Switch, public Parented<HaierClimateBase> {
+ public:
+  HealthModeSwitch() = default;
+
+ protected:
+  void write_state(bool state) override;
+};
+
+}  // namespace haier
+}  // namespace esphome

esphome/components/haier/switch/quiet_mode.cpp

@@ -0,0 +1,14 @@
+#include "quiet_mode.h"
+
+namespace esphome {
+namespace haier {
+
+void QuietModeSwitch::write_state(bool state) {
+  if (this->parent_->get_quiet_mode_state() != state) {
+    this->parent_->set_quiet_mode_state(state);
+  }
+  this->publish_state(state);
+}
+
+}  // namespace haier
+}  // namespace esphome

esphome/components/haier/switch/quiet_mode.h

@@ -0,0 +1,18 @@
+#pragma once
+
+#include "esphome/components/switch/switch.h"
+#include "../hon_climate.h"
+
+namespace esphome {
+namespace haier {
+
+class QuietModeSwitch : public switch_::Switch, public Parented<HonClimate> {
+ public:
+  QuietModeSwitch() = default;
+
+ protected:
+  void write_state(bool state) override;
+};
+
+}  // namespace haier
+}  // namespace esphome

esphome/components/i2s_audio/speaker/__init__.py

@@ -25,6 +25,7 @@ I2SAudioSpeaker = i2s_audio_ns.class_(
 
 
 CONF_DAC_TYPE = "dac_type"
+CONF_I2S_COMM_FMT = "i2s_comm_fmt"
 
 i2s_dac_mode_t = cg.global_ns.enum("i2s_dac_mode_t")
 INTERNAL_DAC_OPTIONS = {
@@ -33,6 +34,20 @@ INTERNAL_DAC_OPTIONS = {
     CONF_STEREO: i2s_dac_mode_t.I2S_DAC_CHANNEL_BOTH_EN,
 }
 
+i2s_comm_format_t = cg.global_ns.enum("i2s_comm_format_t")
+I2C_COMM_FMT_OPTIONS = {
+    "stand_i2s": i2s_comm_format_t.I2S_COMM_FORMAT_STAND_I2S,
+    "stand_msb": i2s_comm_format_t.I2S_COMM_FORMAT_STAND_MSB,
+    "stand_pcm_short": i2s_comm_format_t.I2S_COMM_FORMAT_STAND_PCM_SHORT,
+    "stand_pcm_long": i2s_comm_format_t.I2S_COMM_FORMAT_STAND_PCM_LONG,
+    "stand_max": i2s_comm_format_t.I2S_COMM_FORMAT_STAND_MAX,
+    "i2s_msb": i2s_comm_format_t.I2S_COMM_FORMAT_I2S_MSB,
+    "i2s_lsb": i2s_comm_format_t.I2S_COMM_FORMAT_I2S_LSB,
+    "pcm": i2s_comm_format_t.I2S_COMM_FORMAT_PCM,
+    "pcm_short": i2s_comm_format_t.I2S_COMM_FORMAT_PCM_SHORT,
+    "pcm_long": i2s_comm_format_t.I2S_COMM_FORMAT_PCM_LONG,
+}
+
 NO_INTERNAL_DAC_VARIANTS = [esp32.const.VARIANT_ESP32S2]
 
 
@@ -77,6 +92,9 @@ CONFIG_SCHEMA = cv.All(
                     cv.Required(
                         CONF_I2S_DOUT_PIN
                     ): pins.internal_gpio_output_pin_number,
+                    cv.Optional(CONF_I2S_COMM_FMT, default="stand_i2s"): cv.enum(
+                        I2C_COMM_FMT_OPTIONS, lower=True
+                    ),
                 }
             ),
         },
@@ -96,4 +114,5 @@ async def to_code(config):
         cg.add(var.set_internal_dac_mode(config[CONF_CHANNEL]))
     else:
         cg.add(var.set_dout_pin(config[CONF_I2S_DOUT_PIN]))
+        cg.add(var.set_i2s_comm_fmt(config[CONF_I2S_COMM_FMT]))
     cg.add(var.set_timeout(config[CONF_TIMEOUT]))

esphome/components/i2s_audio/speaker/i2s_audio_speaker.cpp

@@ -83,7 +83,7 @@ void I2SAudioSpeaker::player_task(void *params) {
       .sample_rate = this_speaker->sample_rate_,
       .bits_per_sample = this_speaker->bits_per_sample_,
       .channel_format = this_speaker->channel_,
-      .communication_format = I2S_COMM_FORMAT_STAND_I2S,
+      .communication_format = this_speaker->i2s_comm_fmt_,
       .intr_alloc_flags = ESP_INTR_FLAG_LEVEL1,
       .dma_buf_count = 8,
       .dma_buf_len = 256,

esphome/components/i2s_audio/speaker/i2s_audio_speaker.h

@@ -49,6 +49,7 @@ class I2SAudioSpeaker : public I2SAudioOut, public speaker::Speaker, public Comp
 #if SOC_I2S_SUPPORTS_DAC
   void set_internal_dac_mode(i2s_dac_mode_t mode) { this->internal_dac_mode_ = mode; }
 #endif
+  void set_i2s_comm_fmt(i2s_comm_format_t mode) { this->i2s_comm_fmt_ = mode; }
 
   void start() override;
   void stop() override;
@@ -76,6 +77,7 @@ class I2SAudioSpeaker : public I2SAudioOut, public speaker::Speaker, public Comp
 #if SOC_I2S_SUPPORTS_DAC
   i2s_dac_mode_t internal_dac_mode_{I2S_DAC_CHANNEL_DISABLE};
 #endif
+  i2s_comm_format_t i2s_comm_fmt_;
 };
 
 }  // namespace i2s_audio

esphome/components/lvgl/__init__.py

@@ -22,9 +22,10 @@ from esphome.helpers import write_file_if_changed
 
 from . import defines as df, helpers, lv_validation as lvalid
 from .automation import disp_update, focused_widgets, update_to_code
-from .defines import add_define
+from .defines import CONF_WIDGETS, add_define
 from .encoders import ENCODERS_CONFIG, encoders_to_code, initial_focus_to_code
 from .gradient import GRADIENT_SCHEMA, gradients_to_code
+from .hello_world import get_hello_world
 from .lv_validation import lv_bool, lv_images_used
 from .lvcode import LvContext, LvglComponent
 from .schemas import (
@@ -32,7 +33,7 @@ from .schemas import (
     FLEX_OBJ_SCHEMA,
     GRID_CELL_SCHEMA,
     LAYOUT_SCHEMAS,
-    STYLE_SCHEMA,
+    STATE_SCHEMA,
     WIDGET_TYPES,
     any_widget_schema,
     container_schema,
@@ -292,6 +293,13 @@ def display_schema(config):
     return value or [cv.use_id(Display)(config)]
 
 
+def add_hello_world(config):
+    if CONF_WIDGETS not in config and CONF_PAGES not in config:
+        LOGGER.info("No pages or widgets configured, creating default hello_world page")
+        config[CONF_WIDGETS] = cv.ensure_list(WIDGET_SCHEMA)(get_hello_world())
+    return config
+
+
 FINAL_VALIDATE_SCHEMA = final_validation
 
 CONFIG_SCHEMA = (
@@ -313,7 +321,7 @@ CONFIG_SCHEMA = (
             ),
             cv.Optional(df.CONF_STYLE_DEFINITIONS): cv.ensure_list(
                 cv.Schema({cv.Required(CONF_ID): cv.declare_id(lv_style_t)})
-                .extend(STYLE_SCHEMA)
+                .extend(STATE_SCHEMA)
                 .extend(
                     {
                         cv.Optional(df.CONF_GRID_CELL_X_ALIGN): grid_alignments,
@@ -349,4 +357,5 @@ CONFIG_SCHEMA = (
         }
     )
     .extend(DISP_BG_SCHEMA)
-).add_extra(cv.has_at_least_one_key(CONF_PAGES, df.CONF_WIDGETS))
+    .add_extra(add_hello_world)
+)

esphome/components/lvgl/hello_world.py

@@ -0,0 +1,64 @@
+from io import StringIO
+
+from esphome.yaml_util import parse_yaml
+
+CONFIG = """
+- obj:
+    radius: 0
+    pad_all: 12
+    bg_color: 0xFFFFFF
+    height: 100%
+    width: 100%
+    widgets:
+    - spinner:
+        id: hello_world_spinner_
+        align: center
+        indicator:
+          arc_color: tomato
+        height: 100
+        width: 100
+        spin_time: 2s
+        arc_length: 60deg
+    - label:
+        id: hello_world_label_
+        text: "Hello World!"
+        align: center
+        on_click:
+            lvgl.spinner.update:
+              id: hello_world_spinner_
+              arc_color: springgreen
+    - checkbox:
+        pad_all: 8
+        text: Checkbox
+        align: top_right
+        on_click:
+          lvgl.label.update:
+            id: hello_world_label_
+            text: "Checked!"
+    - button:
+        pad_all: 8
+        checkable: true
+        align: top_left
+        text_font: montserrat_20
+        on_click:
+          lvgl.label.update:
+            id: hello_world_label_
+            text: "Clicked!"
+        widgets:
+          - label:
+              text: "Button"
+    - slider:
+        width: 80%
+        align: bottom_mid
+        on_value:
+          lvgl.label.update:
+            id: hello_world_label_
+            text:
+              format: "%.0f%%"
+              args: [x]
+"""
+
+
+def get_hello_world():
+    with StringIO(CONFIG) as fp:
+        return parse_yaml("hello_world", fp)

esphome/components/lvgl/lv_validation.py

@@ -49,17 +49,172 @@ def opacity_validator(value):
 
 opacity = LValidator(opacity_validator, uint32, retmapper=literal)
 
+COLOR_NAMES = {
+    "aliceblue": 0xF0F8FF,
+    "antiquewhite": 0xFAEBD7,
+    "aqua": 0x00FFFF,
+    "aquamarine": 0x7FFFD4,
+    "azure": 0xF0FFFF,
+    "beige": 0xF5F5DC,
+    "bisque": 0xFFE4C4,
+    "black": 0x000000,
+    "blanchedalmond": 0xFFEBCD,
+    "blue": 0x0000FF,
+    "blueviolet": 0x8A2BE2,
+    "brown": 0xA52A2A,
+    "burlywood": 0xDEB887,
+    "cadetblue": 0x5F9EA0,
+    "chartreuse": 0x7FFF00,
+    "chocolate": 0xD2691E,
+    "coral": 0xFF7F50,
+    "cornflowerblue": 0x6495ED,
+    "cornsilk": 0xFFF8DC,
+    "crimson": 0xDC143C,
+    "cyan": 0x00FFFF,
+    "darkblue": 0x00008B,
+    "darkcyan": 0x008B8B,
+    "darkgoldenrod": 0xB8860B,
+    "darkgray": 0xA9A9A9,
+    "darkgreen": 0x006400,
+    "darkgrey": 0xA9A9A9,
+    "darkkhaki": 0xBDB76B,
+    "darkmagenta": 0x8B008B,
+    "darkolivegreen": 0x556B2F,
+    "darkorange": 0xFF8C00,
+    "darkorchid": 0x9932CC,
+    "darkred": 0x8B0000,
+    "darksalmon": 0xE9967A,
+    "darkseagreen": 0x8FBC8F,
+    "darkslateblue": 0x483D8B,
+    "darkslategray": 0x2F4F4F,
+    "darkslategrey": 0x2F4F4F,
+    "darkturquoise": 0x00CED1,
+    "darkviolet": 0x9400D3,
+    "deeppink": 0xFF1493,
+    "deepskyblue": 0x00BFFF,
+    "dimgray": 0x696969,
+    "dimgrey": 0x696969,
+    "dodgerblue": 0x1E90FF,
+    "firebrick": 0xB22222,
+    "floralwhite": 0xFFFAF0,
+    "forestgreen": 0x228B22,
+    "fuchsia": 0xFF00FF,
+    "gainsboro": 0xDCDCDC,
+    "ghostwhite": 0xF8F8FF,
+    "goldenrod": 0xDAA520,
+    "gold": 0xFFD700,
+    "gray": 0x808080,
+    "green": 0x008000,
+    "greenyellow": 0xADFF2F,
+    "grey": 0x808080,
+    "honeydew": 0xF0FFF0,
+    "hotpink": 0xFF69B4,
+    "indianred": 0xCD5C5C,
+    "indigo": 0x4B0082,
+    "ivory": 0xFFFFF0,
+    "khaki": 0xF0E68C,
+    "lavenderblush": 0xFFF0F5,
+    "lavender": 0xE6E6FA,
+    "lawngreen": 0x7CFC00,
+    "lemonchiffon": 0xFFFACD,
+    "lightblue": 0xADD8E6,
+    "lightcoral": 0xF08080,
+    "lightcyan": 0xE0FFFF,
+    "lightgoldenrodyellow": 0xFAFAD2,
+    "lightgray": 0xD3D3D3,
+    "lightgreen": 0x90EE90,
+    "lightgrey": 0xD3D3D3,
+    "lightpink": 0xFFB6C1,
+    "lightsalmon": 0xFFA07A,
+    "lightseagreen": 0x20B2AA,
+    "lightskyblue": 0x87CEFA,
+    "lightslategray": 0x778899,
+    "lightslategrey": 0x778899,
+    "lightsteelblue": 0xB0C4DE,
+    "lightyellow": 0xFFFFE0,
+    "lime": 0x00FF00,
+    "limegreen": 0x32CD32,
+    "linen": 0xFAF0E6,
+    "magenta": 0xFF00FF,
+    "maroon": 0x800000,
+    "mediumaquamarine": 0x66CDAA,
+    "mediumblue": 0x0000CD,
+    "mediumorchid": 0xBA55D3,
+    "mediumpurple": 0x9370DB,
+    "mediumseagreen": 0x3CB371,
+    "mediumslateblue": 0x7B68EE,
+    "mediumspringgreen": 0x00FA9A,
+    "mediumturquoise": 0x48D1CC,
+    "mediumvioletred": 0xC71585,
+    "midnightblue": 0x191970,
+    "mintcream": 0xF5FFFA,
+    "mistyrose": 0xFFE4E1,
+    "moccasin": 0xFFE4B5,
+    "navajowhite": 0xFFDEAD,
+    "navy": 0x000080,
+    "oldlace": 0xFDF5E6,
+    "olive": 0x808000,
+    "olivedrab": 0x6B8E23,
+    "orange": 0xFFA500,
+    "orangered": 0xFF4500,
+    "orchid": 0xDA70D6,
+    "palegoldenrod": 0xEEE8AA,
+    "palegreen": 0x98FB98,
+    "paleturquoise": 0xAFEEEE,
+    "palevioletred": 0xDB7093,
+    "papayawhip": 0xFFEFD5,
+    "peachpuff": 0xFFDAB9,
+    "peru": 0xCD853F,
+    "pink": 0xFFC0CB,
+    "plum": 0xDDA0DD,
+    "powderblue": 0xB0E0E6,
+    "purple": 0x800080,
+    "rebeccapurple": 0x663399,
+    "red": 0xFF0000,
+    "rosybrown": 0xBC8F8F,
+    "royalblue": 0x4169E1,
+    "saddlebrown": 0x8B4513,
+    "salmon": 0xFA8072,
+    "sandybrown": 0xF4A460,
+    "seagreen": 0x2E8B57,
+    "seashell": 0xFFF5EE,
+    "sienna": 0xA0522D,
+    "silver": 0xC0C0C0,
+    "skyblue": 0x87CEEB,
+    "slateblue": 0x6A5ACD,
+    "slategray": 0x708090,
+    "slategrey": 0x708090,
+    "snow": 0xFFFAFA,
+    "springgreen": 0x00FF7F,
+    "steelblue": 0x4682B4,
+    "tan": 0xD2B48C,
+    "teal": 0x008080,
+    "thistle": 0xD8BFD8,
+    "tomato": 0xFF6347,
+    "turquoise": 0x40E0D0,
+    "violet": 0xEE82EE,
+    "wheat": 0xF5DEB3,
+    "white": 0xFFFFFF,
+    "whitesmoke": 0xF5F5F5,
+    "yellow": 0xFFFF00,
+    "yellowgreen": 0x9ACD32,
+}
+
 
 @schema_extractor("one_of")
 def color(value):
     if value == SCHEMA_EXTRACT:
         return ["hex color value", "color ID"]
-    return cv.Any(cv.int_, cv.use_id(ColorStruct))(value)
+    return cv.Any(cv.int_, cv.one_of(*COLOR_NAMES, lower=True), cv.use_id(ColorStruct))(
+        value
+    )
 
 
 def color_retmapper(value):
     if isinstance(value, cv.Lambda):
         return cv.returning_lambda(value)
+    if isinstance(value, str) and value in COLOR_NAMES:
+        value = COLOR_NAMES[value]
     if isinstance(value, int):
         return literal(
             f"lv_color_make({(value >> 16) & 0xFF}, {(value >> 8) & 0xFF}, {value & 0xFF})"

esphome/components/nextion/base_component.py

@@ -27,6 +27,7 @@ CONF_BACKGROUND_PRESSED_COLOR = "background_pressed_color"
 CONF_FOREGROUND_PRESSED_COLOR = "foreground_pressed_color"
 CONF_FONT_ID = "font_id"
 CONF_EXIT_REPARSE_ON_START = "exit_reparse_on_start"
+CONF_SKIP_CONNECTION_HANDSHAKE = "skip_connection_handshake"
 
 
 def NextionName(value):

esphome/components/nextion/display.py

@@ -23,6 +23,7 @@ from .base_component import (
     CONF_START_UP_PAGE,
     CONF_AUTO_WAKE_ON_TOUCH,
     CONF_EXIT_REPARSE_ON_START,
+    CONF_SKIP_CONNECTION_HANDSHAKE,
 )
 
 CODEOWNERS = ["@senexcrenshaw", "@edwardtfn"]
@@ -72,6 +73,7 @@ CONFIG_SCHEMA = (
             cv.Optional(CONF_START_UP_PAGE): cv.uint8_t,
             cv.Optional(CONF_AUTO_WAKE_ON_TOUCH, default=True): cv.boolean,
             cv.Optional(CONF_EXIT_REPARSE_ON_START, default=False): cv.boolean,
+            cv.Optional(CONF_SKIP_CONNECTION_HANDSHAKE, default=False): cv.boolean,
         }
     )
     .extend(cv.polling_component_schema("5s"))
@@ -118,6 +120,8 @@ async def to_code(config):
 
     cg.add(var.set_exit_reparse_on_start_internal(config[CONF_EXIT_REPARSE_ON_START]))
 
+    cg.add(var.set_skip_connection_handshake(config[CONF_SKIP_CONNECTION_HANDSHAKE]))
+
     await display.register_display(var, config)
 
     for conf in config.get(CONF_ON_SETUP, []):

esphome/components/nextion/nextion.cpp

@@ -43,6 +43,16 @@ bool Nextion::check_connect_() {
   if (this->get_is_connected_())
     return true;
 
+  // Check if the handshake should be skipped for the Nextion connection
+  if (this->skip_connection_handshake_) {
+    // Log the connection status without handshake
+    ESP_LOGW(TAG, "Nextion display set as connected without performing handshake");
+    // Set the connection status to true
+    this->is_connected_ = true;
+    // Return true indicating the connection is set
+    return true;
+  }
+
   if (this->comok_sent_ == 0) {
     this->reset_(false);
 
@@ -126,10 +136,14 @@ void Nextion::reset_(bool reset_nextion) {
 
 void Nextion::dump_config() {
   ESP_LOGCONFIG(TAG, "Nextion:");
+  if (this->skip_connection_handshake_) {
+    ESP_LOGCONFIG(TAG, "  Skip handshake:   %s", YESNO(this->skip_connection_handshake_));
+  } else {
     ESP_LOGCONFIG(TAG, "  Device Model:     %s", this->device_model_.c_str());
     ESP_LOGCONFIG(TAG, "  Firmware Version: %s", this->firmware_version_.c_str());
     ESP_LOGCONFIG(TAG, "  Serial Number:    %s", this->serial_number_.c_str());
     ESP_LOGCONFIG(TAG, "  Flash Size:       %s", this->flash_size_.c_str());
+  }
   ESP_LOGCONFIG(TAG, "  Wake On Touch:    %s", YESNO(this->auto_wake_on_touch_));
   ESP_LOGCONFIG(TAG, "  Exit reparse:     %s", YESNO(this->exit_reparse_on_start_));
 
@@ -262,6 +276,7 @@ void Nextion::loop() {
       this->goto_page(this->start_up_page_);
     }
 
+    // This could probably be removed from the loop area, as those are redundant.
     this->set_auto_wake_on_touch(this->auto_wake_on_touch_);
     this->set_exit_reparse_on_start(this->exit_reparse_on_start_);
 

esphome/components/nextion/nextion.h

@@ -926,6 +926,21 @@ class Nextion : public NextionBase, public PollingComponent, public uart::UARTDe
    */
   void set_exit_reparse_on_start(bool exit_reparse);
 
+  /**
+   * Sets whether the Nextion display should skip the connection handshake process.
+   * @param skip_handshake True or false. When skip_connection_handshake is true,
+   * the connection will be established without performing the handshake.
+   * This can be useful when using Nextion Simulator.
+   *
+   * Example:
+   * ```cpp
+   * it.set_skip_connection_handshake(true);
+   * ```
+   *
+   * When set to true, the display will be marked as connected without performing a handshake.
+   */
+  void set_skip_connection_handshake(bool skip_handshake) { this->skip_connection_handshake_ = skip_handshake; }
+
   /**
    * Sets Nextion mode between sleep and awake
    * @param True or false. Sleep=true to enter sleep mode or sleep=false to exit sleep mode.
@@ -1221,6 +1236,7 @@ class Nextion : public NextionBase, public PollingComponent, public uart::UARTDe
   int16_t start_up_page_ = -1;
   bool auto_wake_on_touch_ = true;
   bool exit_reparse_on_start_ = false;
+  bool skip_connection_handshake_ = false;
 
   /**
    * Manually send a raw command to the display and don't wait for an acknowledgement packet.

esphome/components/st7701s/st7701s.cpp

@@ -9,14 +9,6 @@ void ST7701S::setup() {
   esph_log_config(TAG, "Setting up ST7701S");
   this->spi_setup();
   this->write_init_sequence_();
-}
-
-// called after a delay after writing the init sequence
-void ST7701S::complete_setup_() {
-  this->write_command_(SLEEP_OUT);
-  this->write_command_(DISPLAY_ON);
-  this->spi_teardown();  // SPI not needed after this
-  delay(10);
 
   esp_lcd_rgb_panel_config_t config{};
   config.flags.fb_in_psram = 1;
@@ -179,7 +171,12 @@ void ST7701S::write_init_sequence_() {
   this->write_data_(val);
   ESP_LOGD(TAG, "write MADCTL %X", val);
   this->write_command_(this->invert_colors_ ? INVERT_ON : INVERT_OFF);
-  this->set_timeout(120, [this] { this->complete_setup_(); });
+  // can't avoid this inline delay due to the need to complete setup before anything else tries to draw.
+  delay(120);  // NOLINT
+  this->write_command_(SLEEP_OUT);
+  this->write_command_(DISPLAY_ON);
+  this->spi_teardown();  // SPI not needed after this
+  delay(10);
 }
 
 void ST7701S::dump_config() {

esphome/components/tca9555/__init__.py

@@ -0,0 +1,72 @@
+from esphome import pins
+import esphome.codegen as cg
+from esphome.components import i2c
+import esphome.config_validation as cv
+from esphome.const import (
+    CONF_ID,
+    CONF_INPUT,
+    CONF_INVERTED,
+    CONF_MODE,
+    CONF_NUMBER,
+    CONF_OUTPUT,
+)
+
+CODEOWNERS = ["@mobrembski"]
+
+AUTO_LOAD = ["gpio_expander"]
+DEPENDENCIES = ["i2c"]
+MULTI_CONF = True
+
+tca9555_ns = cg.esphome_ns.namespace("tca9555")
+
+TCA9555Component = tca9555_ns.class_("TCA9555Component", cg.Component, i2c.I2CDevice)
+TCA9555GPIOPin = tca9555_ns.class_("TCA9555GPIOPin", cg.GPIOPin)
+
+CONF_TCA9555 = "tca9555"
+CONFIG_SCHEMA = (
+    cv.Schema(
+        {
+            cv.Required(CONF_ID): cv.declare_id(TCA9555Component),
+        }
+    )
+    .extend(cv.COMPONENT_SCHEMA)
+    .extend(i2c.i2c_device_schema(0x21))
+)
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+    await i2c.register_i2c_device(var, config)
+
+
+def validate_mode(value):
+    if not (value[CONF_INPUT] or value[CONF_OUTPUT]):
+        raise cv.Invalid("Mode must be either input or output")
+    if value[CONF_INPUT] and value[CONF_OUTPUT]:
+        raise cv.Invalid("Mode must be either input or output")
+    return value
+
+
+TCA9555_PIN_SCHEMA = pins.gpio_base_schema(
+    TCA9555GPIOPin,
+    cv.int_range(min=0, max=15),
+    modes=[CONF_INPUT, CONF_OUTPUT],
+    mode_validator=validate_mode,
+    invertable=True,
+).extend(
+    {
+        cv.Required(CONF_TCA9555): cv.use_id(TCA9555Component),
+    }
+)
+
+
+@pins.PIN_SCHEMA_REGISTRY.register(CONF_TCA9555, TCA9555_PIN_SCHEMA)
+async def tca9555_pin_to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_parented(var, config[CONF_TCA9555])
+
+    cg.add(var.set_pin(config[CONF_NUMBER]))
+    cg.add(var.set_inverted(config[CONF_INVERTED]))
+    cg.add(var.set_flags(pins.gpio_flags_expr(config[CONF_MODE])))
+    return var

esphome/components/tca9555/tca9555.cpp

@@ -0,0 +1,140 @@
+#include "tca9555.h"
+#include "esphome/core/log.h"
+
+static const uint8_t TCA9555_INPUT_PORT_REGISTER_0 = 0x00;
+static const uint8_t TCA9555_INPUT_PORT_REGISTER_1 = 0x01;
+static const uint8_t TCA9555_OUTPUT_PORT_REGISTER_0 = 0x02;
+static const uint8_t TCA9555_OUTPUT_PORT_REGISTER_1 = 0x03;
+static const uint8_t TCA9555_POLARITY_REGISTER_0 = 0x04;
+static const uint8_t TCA9555_POLARITY_REGISTER_1 = 0x05;
+static const uint8_t TCA9555_CONFIGURATION_PORT_0 = 0x06;
+static const uint8_t TCA9555_CONFIGURATION_PORT_1 = 0x07;
+
+namespace esphome {
+namespace tca9555 {
+
+static const char *const TAG = "tca9555";
+
+void TCA9555Component::setup() {
+  ESP_LOGCONFIG(TAG, "Setting up TCA9555...");
+  if (!this->read_gpio_modes_()) {
+    this->mark_failed();
+    return;
+  }
+  if (!this->read_gpio_outputs_()) {
+    this->mark_failed();
+    return;
+  }
+}
+void TCA9555Component::dump_config() {
+  ESP_LOGCONFIG(TAG, "TCA9555:");
+  LOG_I2C_DEVICE(this)
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "Communication with TCA9555 failed!");
+  }
+}
+void TCA9555Component::pin_mode(uint8_t pin, gpio::Flags flags) {
+  if (flags == gpio::FLAG_INPUT) {
+    // Set mode mask bit
+    this->mode_mask_ |= 1 << pin;
+  } else if (flags == gpio::FLAG_OUTPUT) {
+    // Clear mode mask bit
+    this->mode_mask_ &= ~(1 << pin);
+  }
+  // Write GPIO to enable input mode
+  this->write_gpio_modes_();
+}
+void TCA9555Component::loop() { this->reset_pin_cache_(); }
+
+bool TCA9555Component::read_gpio_outputs_() {
+  if (this->is_failed())
+    return false;
+  uint8_t data[2];
+  if (!this->read_bytes(TCA9555_OUTPUT_PORT_REGISTER_0, data, 2)) {
+    this->status_set_warning("Failed to read output register");
+    return false;
+  }
+  this->output_mask_ = (uint16_t(data[1]) << 8) | (uint16_t(data[0]) << 0);
+  this->status_clear_warning();
+  return true;
+}
+
+bool TCA9555Component::read_gpio_modes_() {
+  if (this->is_failed())
+    return false;
+  uint8_t data[2];
+  bool success = this->read_bytes(TCA9555_CONFIGURATION_PORT_0, data, 2);
+  if (!success) {
+    this->status_set_warning("Failed to read mode register");
+    return false;
+  }
+  this->mode_mask_ = (uint16_t(data[1]) << 8) | (uint16_t(data[0]) << 0);
+
+  this->status_clear_warning();
+  return true;
+}
+bool TCA9555Component::digital_read_hw(uint8_t pin) {
+  if (this->is_failed())
+    return false;
+  bool success;
+  uint8_t data[2];
+  success = this->read_bytes(TCA9555_INPUT_PORT_REGISTER_0, data, 2);
+  this->input_mask_ = (uint16_t(data[1]) << 8) | (uint16_t(data[0]) << 0);
+
+  if (!success) {
+    this->status_set_warning("Failed to read input register");
+    return false;
+  }
+
+  this->status_clear_warning();
+  return true;
+}
+
+void TCA9555Component::digital_write_hw(uint8_t pin, bool value) {
+  if (this->is_failed())
+    return;
+
+  if (value) {
+    this->output_mask_ |= (1 << pin);
+  } else {
+    this->output_mask_ &= ~(1 << pin);
+  }
+
+  uint8_t data[2];
+  data[0] = this->output_mask_;
+  data[1] = this->output_mask_ >> 8;
+  if (!this->write_bytes(TCA9555_OUTPUT_PORT_REGISTER_0, data, 2)) {
+    this->status_set_warning("Failed to write output register");
+    return;
+  }
+
+  this->status_clear_warning();
+}
+
+bool TCA9555Component::write_gpio_modes_() {
+  if (this->is_failed())
+    return false;
+  uint8_t data[2];
+
+  data[0] = this->mode_mask_;
+  data[1] = this->mode_mask_ >> 8;
+  if (!this->write_bytes(TCA9555_CONFIGURATION_PORT_0, data, 2)) {
+    this->status_set_warning("Failed to write mode register");
+    return false;
+  }
+  this->status_clear_warning();
+  return true;
+}
+
+bool TCA9555Component::digital_read_cache(uint8_t pin) { return this->input_mask_ & (1 << pin); }
+
+float TCA9555Component::get_setup_priority() const { return setup_priority::IO; }
+
+void TCA9555GPIOPin::setup() { this->pin_mode(this->flags_); }
+void TCA9555GPIOPin::pin_mode(gpio::Flags flags) { this->parent_->pin_mode(this->pin_, flags); }
+bool TCA9555GPIOPin::digital_read() { return this->parent_->digital_read(this->pin_) != this->inverted_; }
+void TCA9555GPIOPin::digital_write(bool value) { this->parent_->digital_write(this->pin_, value != this->inverted_); }
+std::string TCA9555GPIOPin::dump_summary() const { return str_sprintf("%u via TCA9555", this->pin_); }
+
+}  // namespace tca9555
+}  // namespace esphome

esphome/components/tca9555/tca9555.h

@@ -0,0 +1,64 @@
+#pragma once
+
+#include "esphome/components/gpio_expander/cached_gpio.h"
+#include "esphome/components/i2c/i2c.h"
+#include "esphome/core/component.h"
+#include "esphome/core/hal.h"
+
+namespace esphome {
+namespace tca9555 {
+
+class TCA9555Component : public Component,
+                         public i2c::I2CDevice,
+                         public gpio_expander::CachedGpioExpander<uint8_t, 16> {
+ public:
+  TCA9555Component() = default;
+
+  /// Check i2c availability and setup masks
+  void setup() override;
+  void pin_mode(uint8_t pin, gpio::Flags flags);
+
+  float get_setup_priority() const override;
+
+  void dump_config() override;
+
+  void loop() override;
+
+ protected:
+  bool digital_read_hw(uint8_t pin) override;
+  bool digital_read_cache(uint8_t pin) override;
+  void digital_write_hw(uint8_t pin, bool value) override;
+
+  /// Mask for the pin mode - 1 means output, 0 means input
+  uint16_t mode_mask_{0x00};
+  /// The mask to write as output state - 1 means HIGH, 0 means LOW
+  uint16_t output_mask_{0x00};
+  /// The state read in digital_read_hw - 1 means HIGH, 0 means LOW
+  uint16_t input_mask_{0x00};
+
+  bool read_gpio_modes_();
+  bool write_gpio_modes_();
+  bool read_gpio_outputs_();
+};
+
+/// Helper class to expose a TCA9555 pin as an internal input GPIO pin.
+class TCA9555GPIOPin : public GPIOPin, public Parented<TCA9555Component> {
+ public:
+  void setup() override;
+  void pin_mode(gpio::Flags flags) override;
+  bool digital_read() override;
+  void digital_write(bool value) override;
+  std::string dump_summary() const override;
+
+  void set_pin(uint8_t pin) { this->pin_ = pin; }
+  void set_inverted(bool inverted) { this->inverted_ = inverted; }
+  void set_flags(gpio::Flags flags) { this->flags_ = flags; }
+
+ protected:
+  uint8_t pin_;
+  bool inverted_;
+  gpio::Flags flags_;
+};
+
+}  // namespace tca9555
+}  // namespace esphome

tests/components/ethernet/common-openeth.yaml

@@ -0,0 +1,2 @@
+ethernet:
+  type: OPENETH

tests/components/ethernet/test-openeth.esp32-idf.yaml

@@ -0,0 +1 @@
+<<: !include common-openeth.yaml

tests/components/haier/common.yaml

@@ -16,7 +16,6 @@ climate:
     name: Haier AC
     wifi_signal: true
     answer_timeout: 200ms
-    beeper: true
     visual:
       min_temperature: 16 °C
       max_temperature: 30 °C
@@ -38,7 +37,6 @@ climate:
     supported_presets:
       - AWAY
       - BOOST
-      - ECO
       - SLEEP
     on_alarm_start:
       then:
@@ -112,3 +110,15 @@ text_sensor:
       name: Haier cleaning status
     protocol_version:
       name: Haier protocol version
+
+switch:
+  - platform: haier
+    haier_id: haier_ac
+    beeper:
+      name: Haier beeper
+    display:
+      name: Haier display
+    health_mode:
+      name: Haier health mode
+    quiet_mode:
+      name: Haier quiet mode

tests/components/lvgl/lvgl-package.yaml

@@ -38,8 +38,8 @@ lvgl:
       border_width: 0
       radius: 0
       pad_all: 0
-      border_color: 0x0077b3
+      border_color: tomato
-      text_color: 0xFFFFFF
+      text_color: springgreen
       width: 100%
       height: 30
       border_side: [left, top]

tests/components/lvgl/test.host.yaml

@@ -0,0 +1,11 @@
+display:
+  - platform: sdl
+    auto_clear_enabled: false
+    dimensions:
+      width: 480
+      height: 480
+
+touchscreen:
+  - platform: sdl
+
+lvgl:

tests/components/tca9555/test.esp32-ard.yaml

@@ -0,0 +1,27 @@
+i2c:
+  - id: i2c_tca9555
+    scl: 16
+    sda: 17
+
+tca9555:
+  - id: tca9555_hub
+    address: 0x21
+
+binary_sensor:
+  - platform: gpio
+    id: tca9555_binary_sensor
+    name: TCA9555 Binary Sensor
+    pin:
+      tca9555: tca9555_hub
+      number: 1
+      mode: INPUT
+      inverted: true
+
+output:
+  - platform: gpio
+    id: tca9555_output
+    pin:
+      tca9555: tca9555_hub
+      number: 0
+      mode: OUTPUT
+      inverted: false

tests/components/tca9555/test.esp32-c3-ard.yaml

@@ -0,0 +1,27 @@
+i2c:
+  - id: i2c_tca9555
+    scl: 5
+    sda: 4
+
+tca9555:
+  - id: tca9555_hub
+    address: 0x21
+
+binary_sensor:
+  - platform: gpio
+    id: tca9555_binary_sensor
+    name: TCA9555 Binary Sensor
+    pin:
+      tca9555: tca9555_hub
+      number: 1
+      mode: INPUT
+      inverted: true
+
+output:
+  - platform: gpio
+    id: tca9555_output
+    pin:
+      tca9555: tca9555_hub
+      number: 0
+      mode: OUTPUT
+      inverted: false

tests/components/tca9555/test.esp32-c3-idf.yaml

@@ -0,0 +1,27 @@
+i2c:
+  - id: i2c_tca9555
+    scl: 5
+    sda: 4
+
+tca9555:
+  - id: tca9555_hub
+    address: 0x21
+
+binary_sensor:
+  - platform: gpio
+    id: tca9555_binary_sensor
+    name: TCA9555 Binary Sensor
+    pin:
+      tca9555: tca9555_hub
+      number: 1
+      mode: INPUT
+      inverted: true
+
+output:
+  - platform: gpio
+    id: tca9555_output
+    pin:
+      tca9555: tca9555_hub
+      number: 0
+      mode: OUTPUT
+      inverted: false

tests/components/tca9555/test.esp32-idf.yaml

@@ -0,0 +1,27 @@
+i2c:
+  - id: i2c_tca9555
+    scl: 16
+    sda: 17
+
+tca9555:
+  - id: tca9555_hub
+    address: 0x21
+
+binary_sensor:
+  - platform: gpio
+    id: tca9555_binary_sensor
+    name: TCA9555 Binary Sensor
+    pin:
+      tca9555: tca9555_hub
+      number: 1
+      mode: INPUT
+      inverted: true
+
+output:
+  - platform: gpio
+    id: tca9555_output
+    pin:
+      tca9555: tca9555_hub
+      number: 0
+      mode: OUTPUT
+      inverted: false

tests/components/tca9555/test.esp8266-ard.yaml

@@ -0,0 +1,27 @@
+i2c:
+  - id: i2c_tca9555
+    scl: 5
+    sda: 4
+
+tca9555:
+  - id: tca9555_hub
+    address: 0x21
+
+binary_sensor:
+  - platform: gpio
+    id: tca9555_binary_sensor
+    name: TCA9555 Binary Sensor
+    pin:
+      tca9555: tca9555_hub
+      number: 1
+      mode: INPUT
+      inverted: true
+
+output:
+  - platform: gpio
+    id: tca9555_output
+    pin:
+      tca9555: tca9555_hub
+      number: 0
+      mode: OUTPUT
+      inverted: false

tests/components/tca9555/test.rp2040-ard.yaml

@@ -0,0 +1,27 @@
+i2c:
+  - id: i2c_tca9555
+    scl: 5
+    sda: 4
+
+tca9555:
+  - id: tca9555_hub
+    address: 0x21
+
+binary_sensor:
+  - platform: gpio
+    id: tca9555_binary_sensor
+    name: TCA9555 Binary Sensor
+    pin:
+      tca9555: tca9555_hub
+      number: 1
+      mode: INPUT
+      inverted: true
+
+output:
+  - platform: gpio
+    id: tca9555_output
+    pin:
+      tca9555: tca9555_hub
+      number: 0
+      mode: OUTPUT
+      inverted: false