Merge remote-tracking branch 'origin/dev' into platform

.github/actions/restore-python/action.yml

@@ -17,7 +17,7 @@ runs:
   steps:
     - name: Set up Python ${{ inputs.python-version }}
       id: python
-      uses: actions/setup-python@v5.2.0
+      uses: actions/setup-python@v5.3.0
       with:
         python-version: ${{ inputs.python-version }}
     - name: Restore Python virtual environment

.github/workflows/ci-api-proto.yml

@@ -23,7 +23,7 @@ jobs:
       - name: Checkout
         uses: actions/checkout@v4.1.7
       - name: Set up Python
-        uses: actions/setup-python@v5.2.0
+        uses: actions/setup-python@v5.3.0
         with:
           python-version: "3.11"
 

.github/workflows/ci-docker.yml

@@ -42,7 +42,7 @@ jobs:
     steps:
       - uses: actions/checkout@v4.1.7
       - name: Set up Python
-        uses: actions/setup-python@v5.2.0
+        uses: actions/setup-python@v5.3.0
         with:
           python-version: "3.9"
       - name: Set up Docker Buildx

.github/workflows/ci.yml

@@ -41,7 +41,7 @@ jobs:
         run: echo key="${{ hashFiles('requirements.txt', 'requirements_optional.txt', 'requirements_test.txt') }}" >> $GITHUB_OUTPUT
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
         id: python
-        uses: actions/setup-python@v5.2.0
+        uses: actions/setup-python@v5.3.0
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
       - name: Restore Python virtual environment

.github/workflows/release.yml

@@ -53,7 +53,7 @@ jobs:
     steps:
       - uses: actions/checkout@v4.1.7
       - name: Set up Python
-        uses: actions/setup-python@v5.2.0
+        uses: actions/setup-python@v5.3.0
         with:
           python-version: "3.x"
       - name: Set up python environment
@@ -85,7 +85,7 @@ jobs:
     steps:
       - uses: actions/checkout@v4.1.7
       - name: Set up Python
-        uses: actions/setup-python@v5.2.0
+        uses: actions/setup-python@v5.3.0
         with:
           python-version: "3.9"
 

.github/workflows/sync-device-classes.yml

@@ -22,7 +22,7 @@ jobs:
           path: lib/home-assistant
 
       - name: Setup Python
-        uses: actions/setup-python@v5.2.0
+        uses: actions/setup-python@v5.3.0
         with:
           python-version: 3.12
 

esphome/components/animation/__init__.py

@@ -271,7 +271,8 @@ async def to_code(config):
                 pos += 1
 
     elif config[CONF_TYPE] in ["RGB565", "TRANSPARENT_IMAGE"]:
-        data = [0 for _ in range(height * width * 2 * frames)]
+        bytes_per_pixel = 3 if transparent else 2
+        data = [0 for _ in range(height * width * bytes_per_pixel * frames)]
         pos = 0
         for frameIndex in range(frames):
             image.seek(frameIndex)
@@ -288,17 +289,13 @@ async def to_code(config):
                 G = g >> 2
                 B = b >> 3
                 rgb = (R << 11) | (G << 5) | B
-
-                if transparent:
-                    if rgb == 0x0020:
-                        rgb = 0
-                    if a < 0x80:
-                        rgb = 0x0020
-
                 data[pos] = rgb >> 8
                 pos += 1
                 data[pos] = rgb & 0xFF
                 pos += 1
+                if transparent:
+                    data[pos] = a
+                    pos += 1
 
     elif config[CONF_TYPE] in ["BINARY", "TRANSPARENT_BINARY"]:
         width8 = ((width + 7) // 8) * 8

esphome/components/animation/animation.cpp

@@ -62,7 +62,7 @@ void Animation::set_frame(int frame) {
 }
 
 void Animation::update_data_start_() {
-  const uint32_t image_size = image_type_to_width_stride(this->width_, this->type_) * this->height_;
+  const uint32_t image_size = this->get_width_stride() * this->height_;
   this->data_start_ = this->animation_data_start_ + image_size * this->current_frame_;
 }
 

esphome/components/gp8403/output/__init__.py

@@ -16,7 +16,7 @@ CONFIG_SCHEMA = output.FLOAT_OUTPUT_SCHEMA.extend(
     {
         cv.GenerateID(): cv.declare_id(GP8403Output),
         cv.GenerateID(CONF_GP8403_ID): cv.use_id(GP8403),
-        cv.Required(CONF_CHANNEL): cv.one_of(0, 1),
+        cv.Required(CONF_CHANNEL): cv.int_range(min=0, max=1),
     }
 ).extend(cv.COMPONENT_SCHEMA)
 

esphome/components/image/__init__.py

@@ -361,24 +361,21 @@ async def to_code(config):
     elif config[CONF_TYPE] in ["RGB565"]:
         image = image.convert("RGBA")
         pixels = list(image.getdata())
-        data = [0 for _ in range(height * width * 2)]
+        bytes_per_pixel = 3 if transparent else 2
+        data = [0 for _ in range(height * width * bytes_per_pixel)]
         pos = 0
         for r, g, b, a in pixels:
             R = r >> 3
             G = g >> 2
             B = b >> 3
             rgb = (R << 11) | (G << 5) | B
-
-            if transparent:
-                if rgb == 0x0020:
-                    rgb = 0
-                if a < 0x80:
-                    rgb = 0x0020
-
             data[pos] = rgb >> 8
             pos += 1
             data[pos] = rgb & 0xFF
             pos += 1
+            if transparent:
+                data[pos] = a
+                pos += 1
 
     elif config[CONF_TYPE] in ["BINARY", "TRANSPARENT_BINARY"]:
         if transparent:

esphome/components/image/image.cpp

@@ -88,7 +88,7 @@ lv_img_dsc_t *Image::get_lv_img_dsc() {
     this->dsc_.header.reserved = 0;
     this->dsc_.header.w = this->width_;
     this->dsc_.header.h = this->height_;
-    this->dsc_.data_size = image_type_to_width_stride(this->dsc_.header.w * this->dsc_.header.h, this->get_type());
+    this->dsc_.data_size = this->get_width_stride() * this->get_height();
     switch (this->get_type()) {
       case IMAGE_TYPE_BINARY:
         this->dsc_.header.cf = LV_IMG_CF_ALPHA_1BIT;
@@ -104,17 +104,17 @@ lv_img_dsc_t *Image::get_lv_img_dsc() {
 
       case IMAGE_TYPE_RGB565:
 #if LV_COLOR_DEPTH == 16
-        this->dsc_.header.cf = this->has_transparency() ? LV_IMG_CF_TRUE_COLOR_CHROMA_KEYED : LV_IMG_CF_TRUE_COLOR;
+        this->dsc_.header.cf = this->has_transparency() ? LV_IMG_CF_TRUE_COLOR_ALPHA : LV_IMG_CF_TRUE_COLOR;
 #else
         this->dsc_.header.cf = LV_IMG_CF_RGB565;
 #endif
         break;
 
-      case image::IMAGE_TYPE_RGBA:
+      case IMAGE_TYPE_RGBA:
 #if LV_COLOR_DEPTH == 32
         this->dsc_.header.cf = LV_IMG_CF_TRUE_COLOR;
 #else
-        this->dsc_.header.cf = LV_IMG_CF_RGBA8888;
+        this->dsc_.header.cf = LV_IMG_CF_TRUE_COLOR_ALPHA;
 #endif
         break;
     }
@@ -147,21 +147,21 @@ Color Image::get_rgb24_pixel_(int x, int y) const {
   return color;
 }
 Color Image::get_rgb565_pixel_(int x, int y) const {
-  const uint32_t pos = (x + y * this->width_) * 2;
+  const uint8_t *pos = this->data_start_;
-  uint16_t rgb565 =
+  if (this->transparent_) {
-      progmem_read_byte(this->data_start_ + pos + 0) << 8 | progmem_read_byte(this->data_start_ + pos + 1);
+    pos += (x + y * this->width_) * 3;
+  } else {
+    pos += (x + y * this->width_) * 2;
+  }
+  uint16_t rgb565 = encode_uint16(progmem_read_byte(pos), progmem_read_byte(pos + 1));
   auto r = (rgb565 & 0xF800) >> 11;
   auto g = (rgb565 & 0x07E0) >> 5;
   auto b = rgb565 & 0x001F;
-  Color color = Color((r << 3) | (r >> 2), (g << 2) | (g >> 4), (b << 3) | (b >> 2));
+  auto a = this->transparent_ ? progmem_read_byte(pos + 2) : 0xFF;
-  if (rgb565 == 0x0020 && transparent_) {
+  Color color = Color((r << 3) | (r >> 2), (g << 2) | (g >> 4), (b << 3) | (b >> 2), a);
-    // darkest green has been defined as transparent color for transparent RGB565 images.
-    color.w = 0;
-  } else {
-    color.w = 0xFF;
-  }
   return color;
 }
+
 Color Image::get_grayscale_pixel_(int x, int y) const {
   const uint32_t pos = (x + y * this->width_);
   const uint8_t gray = progmem_read_byte(this->data_start_ + pos);

esphome/components/image/image.h

@@ -17,24 +17,6 @@ enum ImageType {
   IMAGE_TYPE_RGBA = 4,
 };
 
-inline int image_type_to_bpp(ImageType type) {
-  switch (type) {
-    case IMAGE_TYPE_BINARY:
-      return 1;
-    case IMAGE_TYPE_GRAYSCALE:
-      return 8;
-    case IMAGE_TYPE_RGB565:
-      return 16;
-    case IMAGE_TYPE_RGB24:
-      return 24;
-    case IMAGE_TYPE_RGBA:
-      return 32;
-  }
-  return 0;
-}
-
-inline int image_type_to_width_stride(int width, ImageType type) { return (width * image_type_to_bpp(type) + 7u) / 8u; }
-
 class Image : public display::BaseImage {
  public:
   Image(const uint8_t *data_start, int width, int height, ImageType type);
@@ -44,6 +26,25 @@ class Image : public display::BaseImage {
   const uint8_t *get_data_start() const { return this->data_start_; }
   ImageType get_type() const;
 
+  int get_bpp() const {
+    switch (this->type_) {
+      case IMAGE_TYPE_BINARY:
+        return 1;
+      case IMAGE_TYPE_GRAYSCALE:
+        return 8;
+      case IMAGE_TYPE_RGB565:
+        return this->transparent_ ? 24 : 16;
+      case IMAGE_TYPE_RGB24:
+        return 24;
+      case IMAGE_TYPE_RGBA:
+        return 32;
+    }
+    return 0;
+  }
+
+  /// Return the stride of the image in bytes, that is, the distance in bytes
+  /// between two consecutive rows of pixels.
+  uint32_t get_width_stride() const { return (this->width_ * this->get_bpp() + 7u) / 8u; }
   void draw(int x, int y, display::Display *display, Color color_on, Color color_off) override;
 
   void set_transparency(bool transparent) { transparent_ = transparent; }

esphome/components/media_player/__init__.py

@@ -21,6 +21,7 @@ media_player_ns = cg.esphome_ns.namespace("media_player")
 
 MediaPlayer = media_player_ns.class_("MediaPlayer")
 
+
 PlayAction = media_player_ns.class_(
     "PlayAction", automation.Action, cg.Parented.template(MediaPlayer)
 )
@@ -60,7 +61,11 @@ AnnoucementTrigger = media_player_ns.class_(
     "AnnouncementTrigger", automation.Trigger.template()
 )
 IsIdleCondition = media_player_ns.class_("IsIdleCondition", automation.Condition)
+IsPausedCondition = media_player_ns.class_("IsPausedCondition", automation.Condition)
 IsPlayingCondition = media_player_ns.class_("IsPlayingCondition", automation.Condition)
+IsAnnouncingCondition = media_player_ns.class_(
+    "IsAnnouncingCondition", automation.Condition
+)
 
 
 async def setup_media_player_core_(var, config):
@@ -159,9 +164,15 @@ async def media_player_play_media_action(config, action_id, template_arg, args):
 @automation.register_condition(
     "media_player.is_idle", IsIdleCondition, MEDIA_PLAYER_ACTION_SCHEMA
 )
+@automation.register_condition(
+    "media_player.is_paused", IsPausedCondition, MEDIA_PLAYER_ACTION_SCHEMA
+)
 @automation.register_condition(
     "media_player.is_playing", IsPlayingCondition, MEDIA_PLAYER_ACTION_SCHEMA
 )
+@automation.register_condition(
+    "media_player.is_announcing", IsAnnouncingCondition, MEDIA_PLAYER_ACTION_SCHEMA
+)
 async def media_player_action(config, action_id, template_arg, args):
     var = cg.new_Pvariable(action_id, template_arg)
     await cg.register_parented(var, config[CONF_ID])

esphome/components/media_player/automation.h

@@ -68,5 +68,15 @@ template<typename... Ts> class IsPlayingCondition : public Condition<Ts...>, pub
   bool check(Ts... x) override { return this->parent_->state == MediaPlayerState::MEDIA_PLAYER_STATE_PLAYING; }
 };
 
+template<typename... Ts> class IsPausedCondition : public Condition<Ts...>, public Parented<MediaPlayer> {
+ public:
+  bool check(Ts... x) override { return this->parent_->state == MediaPlayerState::MEDIA_PLAYER_STATE_PAUSED; }
+};
+
+template<typename... Ts> class IsAnnouncingCondition : public Condition<Ts...>, public Parented<MediaPlayer> {
+ public:
+  bool check(Ts... x) override { return this->parent_->state == MediaPlayerState::MEDIA_PLAYER_STATE_ANNOUNCING; }
+};
+
 }  // namespace media_player
 }  // namespace esphome

esphome/components/media_player/media_player.cpp

@@ -37,6 +37,10 @@ const char *media_player_command_to_string(MediaPlayerCommand command) {
       return "UNMUTE";
     case MEDIA_PLAYER_COMMAND_TOGGLE:
       return "TOGGLE";
+    case MEDIA_PLAYER_COMMAND_VOLUME_UP:
+      return "VOLUME_UP";
+    case MEDIA_PLAYER_COMMAND_VOLUME_DOWN:
+      return "VOLUME_DOWN";
     default:
       return "UNKNOWN";
   }

esphome/components/online_image/online_image.cpp

@@ -215,16 +215,10 @@ void OnlineImage::draw_pixel_(int x, int y, Color color) {
     }
     case ImageType::IMAGE_TYPE_RGB565: {
       uint16_t col565 = display::ColorUtil::color_to_565(color);
-      if (this->has_transparency()) {
-        if (col565 == 0x0020) {
-          col565 = 0;
-        }
-        if (color.w < 0x80) {
-          col565 = 0x0020;
-        }
-      }
       this->buffer_[pos + 0] = static_cast<uint8_t>((col565 >> 8) & 0xFF);
       this->buffer_[pos + 1] = static_cast<uint8_t>(col565 & 0xFF);
+      if (this->has_transparency())
+        this->buffer_[pos + 2] = color.w;
       break;
     }
     case ImageType::IMAGE_TYPE_RGBA: {

esphome/components/online_image/online_image.h

@@ -86,13 +86,9 @@ class OnlineImage : public PollingComponent,
   Allocator allocator_{Allocator::Flags::ALLOW_FAILURE};
 
   uint32_t get_buffer_size_() const { return get_buffer_size_(this->buffer_width_, this->buffer_height_); }
-  int get_buffer_size_(int width, int height) const {
+  int get_buffer_size_(int width, int height) const { return (this->get_bpp() * width + 7u) / 8u * height; }
-    return std::ceil(image::image_type_to_bpp(this->type_) * width * height / 8.0);
-  }
 
-  int get_position_(int x, int y) const {
+  int get_position_(int x, int y) const { return (x + y * this->buffer_width_) * this->get_bpp() / 8; }
-    return ((x + y * this->buffer_width_) * image::image_type_to_bpp(this->type_)) / 8;
-  }
 
   ESPHOME_ALWAYS_INLINE bool auto_resize_() const { return this->fixed_width_ == 0 || this->fixed_height_ == 0; }
 

esphome/components/opentherm/__init__.py

@@ -1,9 +1,10 @@
 from typing import Any
 
-from esphome import pins
 import esphome.codegen as cg
 import esphome.config_validation as cv
+from esphome import pins
 from esphome.const import CONF_ID, PLATFORM_ESP32, PLATFORM_ESP8266
+from . import generate
 
 CODEOWNERS = ["@olegtarasov"]
 MULTI_CONF = True
@@ -15,15 +16,14 @@ CONF_DHW_ENABLE = "dhw_enable"
 CONF_COOLING_ENABLE = "cooling_enable"
 CONF_OTC_ACTIVE = "otc_active"
 CONF_CH2_ACTIVE = "ch2_active"
+CONF_SUMMER_MODE_ACTIVE = "summer_mode_active"
+CONF_DHW_BLOCK = "dhw_block"
 CONF_SYNC_MODE = "sync_mode"
 
-opentherm_ns = cg.esphome_ns.namespace("opentherm")
-OpenthermHub = opentherm_ns.class_("OpenthermHub", cg.Component)
-
 CONFIG_SCHEMA = cv.All(
     cv.Schema(
         {
-            cv.GenerateID(): cv.declare_id(OpenthermHub),
+            cv.GenerateID(): cv.declare_id(generate.OpenthermHub),
             cv.Required(CONF_IN_PIN): pins.internal_gpio_input_pin_schema,
             cv.Required(CONF_OUT_PIN): pins.internal_gpio_output_pin_schema,
             cv.Optional(CONF_CH_ENABLE, True): cv.boolean,
@@ -31,6 +31,8 @@ CONFIG_SCHEMA = cv.All(
             cv.Optional(CONF_COOLING_ENABLE, False): cv.boolean,
             cv.Optional(CONF_OTC_ACTIVE, False): cv.boolean,
             cv.Optional(CONF_CH2_ACTIVE, False): cv.boolean,
+            cv.Optional(CONF_SUMMER_MODE_ACTIVE, False): cv.boolean,
+            cv.Optional(CONF_DHW_BLOCK, False): cv.boolean,
             cv.Optional(CONF_SYNC_MODE, False): cv.boolean,
         }
     ).extend(cv.COMPONENT_SCHEMA),
@@ -39,8 +41,6 @@ CONFIG_SCHEMA = cv.All(
 
 
 async def to_code(config: dict[str, Any]) -> None:
-    # Create the hub, passing the two callbacks defined below
-    # Since the hub is used in the callbacks, we need to define it first
     var = cg.new_Pvariable(config[CONF_ID])
     await cg.register_component(var, config)
 
@@ -53,5 +53,7 @@ async def to_code(config: dict[str, Any]) -> None:
 
     non_sensors = {CONF_ID, CONF_IN_PIN, CONF_OUT_PIN}
     for key, value in config.items():
-        if key not in non_sensors:
+        if key in non_sensors:
+            continue
+
         cg.add(getattr(var, f"set_{key}")(value))

esphome/components/opentherm/const.py

@@ -0,0 +1,5 @@
+OPENTHERM = "opentherm"
+
+CONF_OPENTHERM_ID = "opentherm_id"
+
+SENSOR = "sensor"

esphome/components/opentherm/generate.py

@@ -0,0 +1,140 @@
+from collections.abc import Awaitable
+from typing import Any, Callable
+
+import esphome.codegen as cg
+from esphome.const import CONF_ID
+from . import const
+from .schema import TSchema
+
+opentherm_ns = cg.esphome_ns.namespace("opentherm")
+OpenthermHub = opentherm_ns.class_("OpenthermHub", cg.Component)
+
+
+def define_has_component(component_type: str, keys: list[str]) -> None:
+    cg.add_define(
+        f"OPENTHERM_{component_type.upper()}_LIST(F, sep)",
+        cg.RawExpression(
+            " sep ".join(map(lambda key: f"F({key}_{component_type.lower()})", keys))
+        ),
+    )
+    for key in keys:
+        cg.add_define(f"OPENTHERM_HAS_{component_type.upper()}_{key}")
+
+
+def define_message_handler(
+    component_type: str, keys: list[str], schemas: dict[str, TSchema]
+) -> None:
+    # The macros defined here should be able to generate things like this:
+    # // Parsing a message and publishing to sensors
+    # case MessageId::Message:
+    #     // Can have multiple sensors here, for example for a Status message with multiple flags
+    #     this->thing_binary_sensor->publish_state(parse_flag8_lb_0(response));
+    #     this->other_binary_sensor->publish_state(parse_flag8_lb_1(response));
+    #     break;
+    # // Building a message for a write request
+    # case MessageId::Message: {
+    #     unsigned int data = 0;
+    #     data = write_flag8_lb_0(some_input_switch->state, data); // Where input_sensor can also be a number/output/switch
+    #     data = write_u8_hb(some_number->state, data);
+    #     return opentherm_->build_request_(MessageType::WriteData, MessageId::Message, data);
+    # }
+
+    messages: dict[str, list[tuple[str, str]]] = {}
+    for key in keys:
+        msg = schemas[key].message
+        if msg not in messages:
+            messages[msg] = []
+        messages[msg].append((key, schemas[key].message_data))
+
+    cg.add_define(
+        f"OPENTHERM_{component_type.upper()}_MESSAGE_HANDLERS(MESSAGE, ENTITY, entity_sep, postscript, msg_sep)",
+        cg.RawExpression(
+            " msg_sep ".join(
+                [
+                    f"MESSAGE({msg}) "
+                    + " entity_sep ".join(
+                        [
+                            f"ENTITY({key}_{component_type.lower()}, {msg_data})"
+                            for key, msg_data in keys
+                        ]
+                    )
+                    + " postscript"
+                    for msg, keys in messages.items()
+                ]
+            )
+        ),
+    )
+
+
+def define_readers(component_type: str, keys: list[str]) -> None:
+    for key in keys:
+        cg.add_define(
+            f"OPENTHERM_READ_{key}",
+            cg.RawExpression(f"this->{key}_{component_type.lower()}->state"),
+        )
+
+
+def add_messages(hub: cg.MockObj, keys: list[str], schemas: dict[str, TSchema]):
+    messages: set[tuple[str, bool]] = set()
+    for key in keys:
+        messages.add((schemas[key].message, schemas[key].keep_updated))
+    for msg, keep_updated in messages:
+        msg_expr = cg.RawExpression(f"esphome::opentherm::MessageId::{msg}")
+        if keep_updated:
+            cg.add(hub.add_repeating_message(msg_expr))
+        else:
+            cg.add(hub.add_initial_message(msg_expr))
+
+
+def add_property_set(var: cg.MockObj, config_key: str, config: dict[str, Any]) -> None:
+    if config_key in config:
+        cg.add(getattr(var, f"set_{config_key}")(config[config_key]))
+
+
+Create = Callable[[dict[str, Any], str, cg.MockObj], Awaitable[cg.Pvariable]]
+
+
+def create_only_conf(
+    create: Callable[[dict[str, Any]], Awaitable[cg.Pvariable]]
+) -> Create:
+    return lambda conf, _key, _hub: create(conf)
+
+
+async def component_to_code(
+    component_type: str,
+    schemas: dict[str, TSchema],
+    type: cg.MockObjClass,
+    create: Create,
+    config: dict[str, Any],
+) -> list[str]:
+    """Generate the code for each configured component in the schema of a component type.
+
+    Parameters:
+    - component_type: The type of component, e.g. "sensor" or "binary_sensor"
+    - schema_: The schema for that component type, a list of available components
+    - type: The type of the component, e.g. sensor.Sensor or OpenthermOutput
+    - create: A constructor function for the component, which receives the config,
+      the key and the hub and should asynchronously return the new component
+    - config: The configuration for this component type
+
+    Returns: The list of keys for the created components
+    """
+    cg.add_define(f"OPENTHERM_USE_{component_type.upper()}")
+
+    hub = await cg.get_variable(config[const.CONF_OPENTHERM_ID])
+
+    keys: list[str] = []
+    for key, conf in config.items():
+        if not isinstance(conf, dict):
+            continue
+        id = conf[CONF_ID]
+        if id and id.type == type:
+            entity = await create(conf, key, hub)
+            cg.add(getattr(hub, f"set_{key}_{component_type.lower()}")(entity))
+            keys.append(key)
+
+    define_has_component(component_type, keys)
+    define_message_handler(component_type, keys, schemas)
+    add_messages(hub, keys, schemas)
+
+    return keys

esphome/components/opentherm/hub.cpp

@@ -7,50 +7,114 @@ namespace esphome {
 namespace opentherm {
 
 static const char *const TAG = "opentherm";
+namespace message_data {
+bool parse_flag8_lb_0(OpenthermData &data) { return read_bit(data.valueLB, 0); }
+bool parse_flag8_lb_1(OpenthermData &data) { return read_bit(data.valueLB, 1); }
+bool parse_flag8_lb_2(OpenthermData &data) { return read_bit(data.valueLB, 2); }
+bool parse_flag8_lb_3(OpenthermData &data) { return read_bit(data.valueLB, 3); }
+bool parse_flag8_lb_4(OpenthermData &data) { return read_bit(data.valueLB, 4); }
+bool parse_flag8_lb_5(OpenthermData &data) { return read_bit(data.valueLB, 5); }
+bool parse_flag8_lb_6(OpenthermData &data) { return read_bit(data.valueLB, 6); }
+bool parse_flag8_lb_7(OpenthermData &data) { return read_bit(data.valueLB, 7); }
+bool parse_flag8_hb_0(OpenthermData &data) { return read_bit(data.valueHB, 0); }
+bool parse_flag8_hb_1(OpenthermData &data) { return read_bit(data.valueHB, 1); }
+bool parse_flag8_hb_2(OpenthermData &data) { return read_bit(data.valueHB, 2); }
+bool parse_flag8_hb_3(OpenthermData &data) { return read_bit(data.valueHB, 3); }
+bool parse_flag8_hb_4(OpenthermData &data) { return read_bit(data.valueHB, 4); }
+bool parse_flag8_hb_5(OpenthermData &data) { return read_bit(data.valueHB, 5); }
+bool parse_flag8_hb_6(OpenthermData &data) { return read_bit(data.valueHB, 6); }
+bool parse_flag8_hb_7(OpenthermData &data) { return read_bit(data.valueHB, 7); }
+uint8_t parse_u8_lb(OpenthermData &data) { return data.valueLB; }
+uint8_t parse_u8_hb(OpenthermData &data) { return data.valueHB; }
+int8_t parse_s8_lb(OpenthermData &data) { return (int8_t) data.valueLB; }
+int8_t parse_s8_hb(OpenthermData &data) { return (int8_t) data.valueHB; }
+uint16_t parse_u16(OpenthermData &data) { return data.u16(); }
+int16_t parse_s16(OpenthermData &data) { return data.s16(); }
+float parse_f88(OpenthermData &data) { return data.f88(); }
 
-OpenthermData OpenthermHub::build_request_(MessageId request_id) {
+void write_flag8_lb_0(const bool value, OpenthermData &data) { data.valueLB = write_bit(data.valueLB, 0, value); }
+void write_flag8_lb_1(const bool value, OpenthermData &data) { data.valueLB = write_bit(data.valueLB, 1, value); }
+void write_flag8_lb_2(const bool value, OpenthermData &data) { data.valueLB = write_bit(data.valueLB, 2, value); }
+void write_flag8_lb_3(const bool value, OpenthermData &data) { data.valueLB = write_bit(data.valueLB, 3, value); }
+void write_flag8_lb_4(const bool value, OpenthermData &data) { data.valueLB = write_bit(data.valueLB, 4, value); }
+void write_flag8_lb_5(const bool value, OpenthermData &data) { data.valueLB = write_bit(data.valueLB, 5, value); }
+void write_flag8_lb_6(const bool value, OpenthermData &data) { data.valueLB = write_bit(data.valueLB, 6, value); }
+void write_flag8_lb_7(const bool value, OpenthermData &data) { data.valueLB = write_bit(data.valueLB, 7, value); }
+void write_flag8_hb_0(const bool value, OpenthermData &data) { data.valueHB = write_bit(data.valueHB, 0, value); }
+void write_flag8_hb_1(const bool value, OpenthermData &data) { data.valueHB = write_bit(data.valueHB, 1, value); }
+void write_flag8_hb_2(const bool value, OpenthermData &data) { data.valueHB = write_bit(data.valueHB, 2, value); }
+void write_flag8_hb_3(const bool value, OpenthermData &data) { data.valueHB = write_bit(data.valueHB, 3, value); }
+void write_flag8_hb_4(const bool value, OpenthermData &data) { data.valueHB = write_bit(data.valueHB, 4, value); }
+void write_flag8_hb_5(const bool value, OpenthermData &data) { data.valueHB = write_bit(data.valueHB, 5, value); }
+void write_flag8_hb_6(const bool value, OpenthermData &data) { data.valueHB = write_bit(data.valueHB, 6, value); }
+void write_flag8_hb_7(const bool value, OpenthermData &data) { data.valueHB = write_bit(data.valueHB, 7, value); }
+void write_u8_lb(const uint8_t value, OpenthermData &data) { data.valueLB = value; }
+void write_u8_hb(const uint8_t value, OpenthermData &data) { data.valueHB = value; }
+void write_s8_lb(const int8_t value, OpenthermData &data) { data.valueLB = (uint8_t) value; }
+void write_s8_hb(const int8_t value, OpenthermData &data) { data.valueHB = (uint8_t) value; }
+void write_u16(const uint16_t value, OpenthermData &data) { data.u16(value); }
+void write_s16(const int16_t value, OpenthermData &data) { data.s16(value); }
+void write_f88(const float value, OpenthermData &data) { data.f88(value); }
+
+}  // namespace message_data
+
+OpenthermData OpenthermHub::build_request_(MessageId request_id) const {
   OpenthermData data;
   data.type = 0;
   data.id = 0;
   data.valueHB = 0;
   data.valueLB = 0;
 
-  // First, handle the status request. This requires special logic, because we
+  // We need this special logic for STATUS message because we have two options for specifying boiler modes:
-  // wouldn't want to inadvertently disable domestic hot water, for example.
+  // with static config values in the hub, or with separate switches.
-  // It is also included in the macro-generated code below, but that will
-  // never be executed, because we short-circuit it here.
   if (request_id == MessageId::STATUS) {
-    bool const ch_enabled = this->ch_enable;
+    // NOLINTBEGIN
-    bool dhw_enabled = this->dhw_enable;
+    bool const ch_enabled = this->ch_enable && OPENTHERM_READ_ch_enable && OPENTHERM_READ_t_set > 0.0;
-    bool cooling_enabled = this->cooling_enable;
+    bool const dhw_enabled = this->dhw_enable && OPENTHERM_READ_dhw_enable;
-    bool otc_enabled = this->otc_active;
+    bool const cooling_enabled =
-    bool ch2_enabled = this->ch2_active;
+        this->cooling_enable && OPENTHERM_READ_cooling_enable && OPENTHERM_READ_cooling_control > 0.0;
+    bool const otc_enabled = this->otc_active && OPENTHERM_READ_otc_active;
+    bool const ch2_enabled = this->ch2_active && OPENTHERM_READ_ch2_active && OPENTHERM_READ_t_set_ch2 > 0.0;
+    bool const summer_mode_is_active = this->summer_mode_active && OPENTHERM_READ_summer_mode_active;
+    bool const dhw_blocked = this->dhw_block && OPENTHERM_READ_dhw_block;
+    // NOLINTEND
 
     data.type = MessageType::READ_DATA;
     data.id = MessageId::STATUS;
-    data.valueHB = ch_enabled | (dhw_enabled << 1) | (cooling_enabled << 2) | (otc_enabled << 3) | (ch2_enabled << 4);
+    data.valueHB = ch_enabled | (dhw_enabled << 1) | (cooling_enabled << 2) | (otc_enabled << 3) | (ch2_enabled << 4) |
+                   (summer_mode_is_active << 5) | (dhw_blocked << 6);
+
+    return data;
+  }
 
 // Disable incomplete switch statement warnings, because the cases in each
 // switch are generated based on the configured sensors and inputs.
 #pragma GCC diagnostic push
 #pragma GCC diagnostic ignored "-Wswitch"
 
-    // TODO: This is a placeholder for an auto-generated switch statement which builds request structure based on
+  switch (request_id) { OPENTHERM_SENSOR_MESSAGE_HANDLERS(OPENTHERM_MESSAGE_READ_MESSAGE, OPENTHERM_IGNORE, , , ) }
-    // which sensors are enabled in config.
 
 #pragma GCC diagnostic pop
 
-    return data;
+  // And if we get here, a message was requested which somehow wasn't handled.
-  }
+  // This shouldn't happen due to the way the defines are configured, so we
-  return OpenthermData();
+  // log an error and just return a 0 message.
+  ESP_LOGE(TAG, "Tried to create a request with unknown id %d. This should never happen, so please open an issue.",
+           request_id);
+  return {};
 }
 
-OpenthermHub::OpenthermHub() : Component() {}
+OpenthermHub::OpenthermHub() : Component(), in_pin_{}, out_pin_{} {}
 
 void OpenthermHub::process_response(OpenthermData &data) {
   ESP_LOGD(TAG, "Received OpenTherm response with id %d (%s)", data.id,
            this->opentherm_->message_id_to_str((MessageId) data.id));
   ESP_LOGD(TAG, "%s", this->opentherm_->debug_data(data).c_str());
+
+  switch (data.id) {
+    OPENTHERM_SENSOR_MESSAGE_HANDLERS(OPENTHERM_MESSAGE_RESPONSE_MESSAGE, OPENTHERM_MESSAGE_RESPONSE_ENTITY, ,
+                                      OPENTHERM_MESSAGE_RESPONSE_POSTSCRIPT, )
+  }
 }
 
 void OpenthermHub::setup() {
@@ -254,15 +318,17 @@ void OpenthermHub::handle_timeout_error_() {
   this->stop_opentherm_();
 }
 
-#define ID(x) x
-#define SHOW2(x) #x
-#define SHOW(x) SHOW2(x)
-
 void OpenthermHub::dump_config() {
   ESP_LOGCONFIG(TAG, "OpenTherm:");
   LOG_PIN("  In: ", this->in_pin_);
   LOG_PIN("  Out: ", this->out_pin_);
   ESP_LOGCONFIG(TAG, "  Sync mode: %d", this->sync_mode_);
+  ESP_LOGCONFIG(TAG, "  Sensors: %s", SHOW(OPENTHERM_SENSOR_LIST(ID, )));
+  ESP_LOGCONFIG(TAG, "  Binary sensors: %s", SHOW(OPENTHERM_BINARY_SENSOR_LIST(ID, )));
+  ESP_LOGCONFIG(TAG, "  Switches: %s", SHOW(OPENTHERM_SWITCH_LIST(ID, )));
+  ESP_LOGCONFIG(TAG, "  Input sensors: %s", SHOW(OPENTHERM_INPUT_SENSOR_LIST(ID, )));
+  ESP_LOGCONFIG(TAG, "  Outputs: %s", SHOW(OPENTHERM_OUTPUT_LIST(ID, )));
+  ESP_LOGCONFIG(TAG, "  Numbers: %s", SHOW(OPENTHERM_NUMBER_LIST(ID, )));
   ESP_LOGCONFIG(TAG, "  Initial requests:");
   for (auto type : this->initial_messages_) {
     ESP_LOGCONFIG(TAG, "  - %d", type);

esphome/components/opentherm/hub.h

@@ -7,11 +7,17 @@
 
 #include "opentherm.h"
 
+#ifdef OPENTHERM_USE_SENSOR
+#include "esphome/components/sensor/sensor.h"
+#endif
+
 #include <memory>
 #include <unordered_map>
 #include <unordered_set>
 #include <functional>
 
+#include "opentherm_macros.h"
+
 namespace esphome {
 namespace opentherm {
 
@@ -23,6 +29,8 @@ class OpenthermHub : public Component {
   // The OpenTherm interface
   std::unique_ptr<OpenTherm> opentherm_;
 
+  OPENTHERM_SENSOR_LIST(OPENTHERM_DECLARE_SENSOR, )
+
   // The set of initial messages to send on starting communication with the boiler
   std::unordered_set<MessageId> initial_messages_;
   // and the repeating messages which are sent repeatedly to update various sensors
@@ -44,7 +52,7 @@ class OpenthermHub : public Component {
   bool sync_mode_ = false;
 
   // Create OpenTherm messages based on the message id
-  OpenthermData build_request_(MessageId request_id);
+  OpenthermData build_request_(MessageId request_id) const;
   void handle_protocol_write_error_();
   void handle_protocol_read_error_();
   void handle_timeout_error_();
@@ -78,6 +86,8 @@ class OpenthermHub : public Component {
   void set_in_pin(InternalGPIOPin *in_pin) { this->in_pin_ = in_pin; }
   void set_out_pin(InternalGPIOPin *out_pin) { this->out_pin_ = out_pin; }
 
+  OPENTHERM_SENSOR_LIST(OPENTHERM_SET_SENSOR, )
+
   // Add a request to the set of initial requests
   void add_initial_message(MessageId message_id) { this->initial_messages_.insert(message_id); }
   // Add a request to the set of repeating requests. Note that a large number of repeating
@@ -86,9 +96,10 @@ class OpenthermHub : public Component {
   // will be processed.
   void add_repeating_message(MessageId message_id) { this->repeating_messages_.insert(message_id); }
 
-  // There are five status variables, which can either be set as a simple variable,
+  // There are seven status variables, which can either be set as a simple variable,
   // or using a switch. ch_enable and dhw_enable default to true, the others to false.
-  bool ch_enable = true, dhw_enable = true, cooling_enable = false, otc_active = false, ch2_active = false;
+  bool ch_enable = true, dhw_enable = true, cooling_enable = false, otc_active = false, ch2_active = false,
+       summer_mode_active = false, dhw_block = false;
 
   // Setters for the status variables
   void set_ch_enable(bool value) { this->ch_enable = value; }
@@ -96,6 +107,8 @@ class OpenthermHub : public Component {
   void set_cooling_enable(bool value) { this->cooling_enable = value; }
   void set_otc_active(bool value) { this->otc_active = value; }
   void set_ch2_active(bool value) { this->ch2_active = value; }
+  void set_summer_mode_active(bool value) { this->summer_mode_active = value; }
+  void set_dhw_block(bool value) { this->dhw_block = value; }
   void set_sync_mode(bool sync_mode) { this->sync_mode_ = sync_mode; }
 
   float get_setup_priority() const override { return setup_priority::HARDWARE; }

esphome/components/opentherm/opentherm.cpp

@@ -283,6 +283,9 @@ bool OpenTherm::init_esp32_timer_() {
     .clk_src = TIMER_SRC_CLK_DEFAULT,
 #endif
     .divider = 80,
+#if defined(SOC_TIMER_GROUP_SUPPORT_XTAL) && ESP_IDF_VERSION_MAJOR < 5
+    .clk_src = TIMER_SRC_CLK_APB
+#endif
   };
 
   esp_err_t result;

esphome/components/opentherm/opentherm.h

@@ -20,7 +20,6 @@
 namespace esphome {
 namespace opentherm {
 
-// TODO: Account for immutable semantics change in hub.cpp when doing later installments of OpenTherm PR
 template<class T> constexpr T read_bit(T value, uint8_t bit) { return (value >> bit) & 0x01; }
 
 template<class T> constexpr T set_bit(T value, uint8_t bit) { return value |= (1UL << bit); }
@@ -28,7 +27,7 @@ template<class T> constexpr T set_bit(T value, uint8_t bit) { return value |= (1
 template<class T> constexpr T clear_bit(T value, uint8_t bit) { return value &= ~(1UL << bit); }
 
 template<class T> constexpr T write_bit(T value, uint8_t bit, uint8_t bit_value) {
-  return bit_value ? setBit(value, bit) : clearBit(value, bit);
+  return bit_value ? set_bit(value, bit) : clear_bit(value, bit);
 }
 
 enum OperationMode {

esphome/components/opentherm/opentherm_macros.h

@@ -0,0 +1,91 @@
+#pragma once
+namespace esphome {
+namespace opentherm {
+
+// ===== hub.h macros =====
+
+// *_LIST macros will be generated in defines.h if at least one sensor from each platform is used.
+// These lists will look like this:
+// #define OPENTHERM_BINARY_SENSOR_LIST(F, sep) F(sensor_1) sep F(sensor_2)
+// These lists will be used in hub.h to define sensor fields (passing macros like OPENTHERM_DECLARE_SENSOR as F)
+// and setters (passing macros like OPENTHERM_SET_SENSOR as F) (see below)
+// In order for things not to break, we define empty lists here in case some platforms are not used in config.
+#ifndef OPENTHERM_SENSOR_LIST
+#define OPENTHERM_SENSOR_LIST(F, sep)
+#endif
+
+// Use macros to create fields for every entity specified in the ESPHome configuration
+#define OPENTHERM_DECLARE_SENSOR(entity) sensor::Sensor *entity;
+
+// Setter macros
+#define OPENTHERM_SET_SENSOR(entity) \
+  void set_##entity(sensor::Sensor *sensor) { this->entity = sensor; }
+
+// ===== hub.cpp macros =====
+
+// *_MESSAGE_HANDLERS are generated in defines.h and look like this:
+// OPENTHERM_NUMBER_MESSAGE_HANDLERS(MESSAGE, ENTITY, entity_sep, postscript, msg_sep) MESSAGE(COOLING_CONTROL)
+// ENTITY(cooling_control_number, f88) postscript msg_sep They contain placeholders for message part and entities parts,
+// since one message can contain multiple entities. MESSAGE part is substituted with OPENTHERM_MESSAGE_WRITE_MESSAGE,
+// OPENTHERM_MESSAGE_READ_MESSAGE or OPENTHERM_MESSAGE_RESPONSE_MESSAGE. ENTITY part is substituted with
+// OPENTHERM_MESSAGE_WRITE_ENTITY or OPENTHERM_MESSAGE_RESPONSE_ENTITY. OPENTHERM_IGNORE is used for sensor read
+// requests since no data needs to be sent or processed, just the data id.
+
+// In order for things not to break, we define empty lists here in case some platforms are not used in config.
+#ifndef OPENTHERM_SENSOR_MESSAGE_HANDLERS
+#define OPENTHERM_SENSOR_MESSAGE_HANDLERS(MESSAGE, ENTITY, entity_sep, postscript, msg_sep)
+#endif
+
+// Read data request builder
+#define OPENTHERM_MESSAGE_READ_MESSAGE(msg) \
+  case MessageId::msg: \
+    data.type = MessageType::READ_DATA; \
+    data.id = request_id; \
+    return data;
+
+// Data processing builders
+#define OPENTHERM_MESSAGE_RESPONSE_MESSAGE(msg) case MessageId::msg:
+#define OPENTHERM_MESSAGE_RESPONSE_ENTITY(key, msg_data) this->key->publish_state(message_data::parse_##msg_data(data));
+#define OPENTHERM_MESSAGE_RESPONSE_POSTSCRIPT break;
+
+#define OPENTHERM_IGNORE(x, y)
+
+// Default macros for STATUS entities
+#ifndef OPENTHERM_READ_ch_enable
+#define OPENTHERM_READ_ch_enable true
+#endif
+#ifndef OPENTHERM_READ_dhw_enable
+#define OPENTHERM_READ_dhw_enable true
+#endif
+#ifndef OPENTHERM_READ_t_set
+#define OPENTHERM_READ_t_set 0.0
+#endif
+#ifndef OPENTHERM_READ_cooling_enable
+#define OPENTHERM_READ_cooling_enable false
+#endif
+#ifndef OPENTHERM_READ_cooling_control
+#define OPENTHERM_READ_cooling_control 0.0
+#endif
+#ifndef OPENTHERM_READ_otc_active
+#define OPENTHERM_READ_otc_active false
+#endif
+#ifndef OPENTHERM_READ_ch2_active
+#define OPENTHERM_READ_ch2_active false
+#endif
+#ifndef OPENTHERM_READ_t_set_ch2
+#define OPENTHERM_READ_t_set_ch2 0.0
+#endif
+#ifndef OPENTHERM_READ_summer_mode_active
+#define OPENTHERM_READ_summer_mode_active false
+#endif
+#ifndef OPENTHERM_READ_dhw_block
+#define OPENTHERM_READ_dhw_block false
+#endif
+
+// These macros utilize the structure of *_LIST macros in order
+#define ID(x) x
+#define SHOW_INNER(x) #x
+#define SHOW(x) SHOW_INNER(x)
+
+}  // namespace opentherm
+}  // namespace esphome

esphome/components/opentherm/schema.py

@@ -0,0 +1,438 @@
+# This file contains a schema for all supported sensors, binary sensors and
+# inputs of the OpenTherm component.
+
+from dataclasses import dataclass
+from typing import Optional, TypeVar
+
+from esphome.const import (
+    UNIT_CELSIUS,
+    UNIT_EMPTY,
+    UNIT_KILOWATT,
+    UNIT_MICROAMP,
+    UNIT_PERCENT,
+    UNIT_REVOLUTIONS_PER_MINUTE,
+    DEVICE_CLASS_CURRENT,
+    DEVICE_CLASS_EMPTY,
+    DEVICE_CLASS_PRESSURE,
+    DEVICE_CLASS_TEMPERATURE,
+    STATE_CLASS_MEASUREMENT,
+    STATE_CLASS_NONE,
+    STATE_CLASS_TOTAL_INCREASING,
+)
+
+
+@dataclass
+class EntitySchema:
+    description: str
+    """Description of the item, based on the OpenTherm spec"""
+
+    message: str
+    """OpenTherm message id used to read or write the value"""
+
+    keep_updated: bool
+    """Whether the value should be read or write repeatedly (True) or only during
+    the initialization phase (False)
+    """
+
+    message_data: str
+    """Instructions on how to interpret the data in the message
+      - flag8_[hb|lb]_[0-7]: data is a byte of single bit flags,
+                             this flag is set in the high (hb) or low byte (lb),
+                             at position 0 to 7
+      - u8_[hb|lb]: data is an unsigned 8-bit integer,
+                    in the high (hb) or low byte (lb)
+      - s8_[hb|lb]: data is an signed 8-bit integer,
+                    in the high (hb) or low byte (lb)
+      - f88: data is a signed fixed point value with
+              1 sign bit, 7 integer bits, 8 fractional bits
+      - u16: data is an unsigned 16-bit integer
+      - s16: data is a signed 16-bit integer
+    """
+
+
+TSchema = TypeVar("TSchema", bound=EntitySchema)
+
+
+@dataclass
+class SensorSchema(EntitySchema):
+    accuracy_decimals: int
+    state_class: str
+    unit_of_measurement: Optional[str] = None
+    icon: Optional[str] = None
+    device_class: Optional[str] = None
+    disabled_by_default: bool = False
+
+
+SENSORS: dict[str, SensorSchema] = {
+    "rel_mod_level": SensorSchema(
+        description="Relative modulation level",
+        unit_of_measurement=UNIT_PERCENT,
+        accuracy_decimals=2,
+        icon="mdi:percent",
+        state_class=STATE_CLASS_MEASUREMENT,
+        message="MODULATION_LEVEL",
+        keep_updated=True,
+        message_data="f88",
+    ),
+    "ch_pressure": SensorSchema(
+        description="Water pressure in CH circuit",
+        unit_of_measurement="bar",
+        accuracy_decimals=2,
+        device_class=DEVICE_CLASS_PRESSURE,
+        state_class=STATE_CLASS_MEASUREMENT,
+        message="CH_WATER_PRESSURE",
+        keep_updated=True,
+        message_data="f88",
+    ),
+    "dhw_flow_rate": SensorSchema(
+        description="Water flow rate in DHW circuit",
+        unit_of_measurement="l/min",
+        accuracy_decimals=2,
+        icon="mdi:waves-arrow-right",
+        state_class=STATE_CLASS_MEASUREMENT,
+        message="DHW_FLOW_RATE",
+        keep_updated=True,
+        message_data="f88",
+    ),
+    "t_boiler": SensorSchema(
+        description="Boiler water temperature",
+        unit_of_measurement=UNIT_CELSIUS,
+        accuracy_decimals=2,
+        device_class=DEVICE_CLASS_TEMPERATURE,
+        state_class=STATE_CLASS_MEASUREMENT,
+        message="FEED_TEMP",
+        keep_updated=True,
+        message_data="f88",
+    ),
+    "t_dhw": SensorSchema(
+        description="DHW temperature",
+        unit_of_measurement=UNIT_CELSIUS,
+        accuracy_decimals=2,
+        device_class=DEVICE_CLASS_TEMPERATURE,
+        state_class=STATE_CLASS_MEASUREMENT,
+        message="DHW_TEMP",
+        keep_updated=True,
+        message_data="f88",
+    ),
+    "t_outside": SensorSchema(
+        description="Outside temperature",
+        unit_of_measurement=UNIT_CELSIUS,
+        accuracy_decimals=2,
+        device_class=DEVICE_CLASS_TEMPERATURE,
+        state_class=STATE_CLASS_MEASUREMENT,
+        message="OUTSIDE_TEMP",
+        keep_updated=True,
+        message_data="f88",
+    ),
+    "t_ret": SensorSchema(
+        description="Return water temperature",
+        unit_of_measurement=UNIT_CELSIUS,
+        accuracy_decimals=2,
+        device_class=DEVICE_CLASS_TEMPERATURE,
+        state_class=STATE_CLASS_MEASUREMENT,
+        message="RETURN_WATER_TEMP",
+        keep_updated=True,
+        message_data="f88",
+    ),
+    "t_storage": SensorSchema(
+        description="Solar storage temperature",
+        unit_of_measurement=UNIT_CELSIUS,
+        accuracy_decimals=2,
+        device_class=DEVICE_CLASS_TEMPERATURE,
+        state_class=STATE_CLASS_MEASUREMENT,
+        message="SOLAR_STORE_TEMP",
+        keep_updated=True,
+        message_data="f88",
+    ),
+    "t_collector": SensorSchema(
+        description="Solar collector temperature",
+        unit_of_measurement=UNIT_CELSIUS,
+        accuracy_decimals=0,
+        device_class=DEVICE_CLASS_TEMPERATURE,
+        state_class=STATE_CLASS_MEASUREMENT,
+        message="SOLAR_COLLECT_TEMP",
+        keep_updated=True,
+        message_data="s16",
+    ),
+    "t_flow_ch2": SensorSchema(
+        description="Flow water temperature CH2 circuit",
+        unit_of_measurement=UNIT_CELSIUS,
+        accuracy_decimals=2,
+        device_class=DEVICE_CLASS_TEMPERATURE,
+        state_class=STATE_CLASS_MEASUREMENT,
+        message="FEED_TEMP_CH2",
+        keep_updated=True,
+        message_data="f88",
+    ),
+    "t_dhw2": SensorSchema(
+        description="Domestic hot water temperature 2",
+        unit_of_measurement=UNIT_CELSIUS,
+        accuracy_decimals=2,
+        device_class=DEVICE_CLASS_TEMPERATURE,
+        state_class=STATE_CLASS_MEASUREMENT,
+        message="DHW2_TEMP",
+        keep_updated=True,
+        message_data="f88",
+    ),
+    "t_exhaust": SensorSchema(
+        description="Boiler exhaust temperature",
+        unit_of_measurement=UNIT_CELSIUS,
+        accuracy_decimals=0,
+        device_class=DEVICE_CLASS_TEMPERATURE,
+        state_class=STATE_CLASS_MEASUREMENT,
+        message="EXHAUST_TEMP",
+        keep_updated=True,
+        message_data="s16",
+    ),
+    "fan_speed": SensorSchema(
+        description="Boiler fan speed",
+        unit_of_measurement=UNIT_REVOLUTIONS_PER_MINUTE,
+        accuracy_decimals=0,
+        device_class=DEVICE_CLASS_EMPTY,
+        state_class=STATE_CLASS_MEASUREMENT,
+        message="FAN_SPEED",
+        keep_updated=True,
+        message_data="u16",
+    ),
+    "flame_current": SensorSchema(
+        description="Boiler flame current",
+        unit_of_measurement=UNIT_MICROAMP,
+        accuracy_decimals=0,
+        device_class=DEVICE_CLASS_CURRENT,
+        state_class=STATE_CLASS_MEASUREMENT,
+        message="FLAME_CURRENT",
+        keep_updated=True,
+        message_data="f88",
+    ),
+    "burner_starts": SensorSchema(
+        description="Number of starts burner",
+        accuracy_decimals=0,
+        icon="mdi:gas-burner",
+        state_class=STATE_CLASS_TOTAL_INCREASING,
+        message="BURNER_STARTS",
+        keep_updated=True,
+        message_data="u16",
+    ),
+    "ch_pump_starts": SensorSchema(
+        description="Number of starts CH pump",
+        accuracy_decimals=0,
+        icon="mdi:pump",
+        state_class=STATE_CLASS_TOTAL_INCREASING,
+        message="CH_PUMP_STARTS",
+        keep_updated=True,
+        message_data="u16",
+    ),
+    "dhw_pump_valve_starts": SensorSchema(
+        description="Number of starts DHW pump/valve",
+        accuracy_decimals=0,
+        icon="mdi:water-pump",
+        state_class=STATE_CLASS_TOTAL_INCREASING,
+        message="DHW_PUMP_STARTS",
+        keep_updated=True,
+        message_data="u16",
+    ),
+    "dhw_burner_starts": SensorSchema(
+        description="Number of starts burner during DHW mode",
+        accuracy_decimals=0,
+        icon="mdi:gas-burner",
+        state_class=STATE_CLASS_TOTAL_INCREASING,
+        message="DHW_BURNER_STARTS",
+        keep_updated=True,
+        message_data="u16",
+    ),
+    "burner_operation_hours": SensorSchema(
+        description="Number of hours that burner is in operation",
+        accuracy_decimals=0,
+        icon="mdi:clock-outline",
+        state_class=STATE_CLASS_TOTAL_INCREASING,
+        message="BURNER_HOURS",
+        keep_updated=True,
+        message_data="u16",
+    ),
+    "ch_pump_operation_hours": SensorSchema(
+        description="Number of hours that CH pump has been running",
+        accuracy_decimals=0,
+        icon="mdi:clock-outline",
+        state_class=STATE_CLASS_TOTAL_INCREASING,
+        message="CH_PUMP_HOURS",
+        keep_updated=True,
+        message_data="u16",
+    ),
+    "dhw_pump_valve_operation_hours": SensorSchema(
+        description="Number of hours that DHW pump has been running or DHW valve has been opened",
+        accuracy_decimals=0,
+        icon="mdi:clock-outline",
+        state_class=STATE_CLASS_TOTAL_INCREASING,
+        message="DHW_PUMP_HOURS",
+        keep_updated=True,
+        message_data="u16",
+    ),
+    "dhw_burner_operation_hours": SensorSchema(
+        description="Number of hours that burner is in operation during DHW mode",
+        accuracy_decimals=0,
+        icon="mdi:clock-outline",
+        state_class=STATE_CLASS_TOTAL_INCREASING,
+        message="DHW_BURNER_HOURS",
+        keep_updated=True,
+        message_data="u16",
+    ),
+    "t_dhw_set_ub": SensorSchema(
+        description="Upper bound for adjustment of DHW setpoint",
+        unit_of_measurement=UNIT_CELSIUS,
+        accuracy_decimals=0,
+        device_class=DEVICE_CLASS_TEMPERATURE,
+        state_class=STATE_CLASS_MEASUREMENT,
+        message="DHW_BOUNDS",
+        keep_updated=False,
+        message_data="s8_hb",
+    ),
+    "t_dhw_set_lb": SensorSchema(
+        description="Lower bound for adjustment of DHW setpoint",
+        unit_of_measurement=UNIT_CELSIUS,
+        accuracy_decimals=0,
+        device_class=DEVICE_CLASS_TEMPERATURE,
+        state_class=STATE_CLASS_MEASUREMENT,
+        message="DHW_BOUNDS",
+        keep_updated=False,
+        message_data="s8_lb",
+    ),
+    "max_t_set_ub": SensorSchema(
+        description="Upper bound for adjustment of max CH setpoint",
+        unit_of_measurement=UNIT_CELSIUS,
+        accuracy_decimals=0,
+        device_class=DEVICE_CLASS_TEMPERATURE,
+        state_class=STATE_CLASS_MEASUREMENT,
+        message="CH_BOUNDS",
+        keep_updated=False,
+        message_data="s8_hb",
+    ),
+    "max_t_set_lb": SensorSchema(
+        description="Lower bound for adjustment of max CH setpoint",
+        unit_of_measurement=UNIT_CELSIUS,
+        accuracy_decimals=0,
+        device_class=DEVICE_CLASS_TEMPERATURE,
+        state_class=STATE_CLASS_MEASUREMENT,
+        message="CH_BOUNDS",
+        keep_updated=False,
+        message_data="s8_lb",
+    ),
+    "t_dhw_set": SensorSchema(
+        description="Domestic hot water temperature setpoint",
+        unit_of_measurement=UNIT_CELSIUS,
+        accuracy_decimals=2,
+        device_class=DEVICE_CLASS_TEMPERATURE,
+        state_class=STATE_CLASS_MEASUREMENT,
+        message="DHW_SETPOINT",
+        keep_updated=True,
+        message_data="f88",
+    ),
+    "max_t_set": SensorSchema(
+        description="Maximum allowable CH water setpoint",
+        unit_of_measurement=UNIT_CELSIUS,
+        accuracy_decimals=2,
+        device_class=DEVICE_CLASS_TEMPERATURE,
+        state_class=STATE_CLASS_MEASUREMENT,
+        message="MAX_CH_SETPOINT",
+        keep_updated=True,
+        message_data="f88",
+    ),
+    "oem_fault_code": SensorSchema(
+        description="OEM fault code",
+        unit_of_measurement=UNIT_EMPTY,
+        accuracy_decimals=0,
+        state_class=STATE_CLASS_NONE,
+        message="FAULT_FLAGS",
+        keep_updated=True,
+        message_data="u8_lb",
+    ),
+    "oem_diagnostic_code": SensorSchema(
+        description="OEM diagnostic code",
+        unit_of_measurement=UNIT_EMPTY,
+        accuracy_decimals=0,
+        state_class=STATE_CLASS_NONE,
+        message="OEM_DIAGNOSTIC",
+        keep_updated=True,
+        message_data="u16",
+    ),
+    "max_capacity": SensorSchema(
+        description="Maximum boiler capacity (KW)",
+        unit_of_measurement=UNIT_KILOWATT,
+        accuracy_decimals=0,
+        state_class=STATE_CLASS_MEASUREMENT,
+        disabled_by_default=True,
+        message="MAX_BOILER_CAPACITY",
+        keep_updated=False,
+        message_data="u8_hb",
+    ),
+    "min_mod_level": SensorSchema(
+        description="Minimum modulation level",
+        unit_of_measurement=UNIT_PERCENT,
+        accuracy_decimals=0,
+        icon="mdi:percent",
+        disabled_by_default=True,
+        state_class=STATE_CLASS_MEASUREMENT,
+        message="MAX_BOILER_CAPACITY",
+        keep_updated=False,
+        message_data="u8_lb",
+    ),
+    "opentherm_version_device": SensorSchema(
+        description="Version of OpenTherm implemented by device",
+        unit_of_measurement=UNIT_EMPTY,
+        accuracy_decimals=0,
+        state_class=STATE_CLASS_NONE,
+        disabled_by_default=True,
+        message="OT_VERSION_DEVICE",
+        keep_updated=False,
+        message_data="f88",
+    ),
+    "device_type": SensorSchema(
+        description="Device product type",
+        unit_of_measurement=UNIT_EMPTY,
+        accuracy_decimals=0,
+        state_class=STATE_CLASS_NONE,
+        disabled_by_default=True,
+        message="VERSION_DEVICE",
+        keep_updated=False,
+        message_data="u8_hb",
+    ),
+    "device_version": SensorSchema(
+        description="Device product version",
+        unit_of_measurement=UNIT_EMPTY,
+        accuracy_decimals=0,
+        state_class=STATE_CLASS_NONE,
+        disabled_by_default=True,
+        message="VERSION_DEVICE",
+        keep_updated=False,
+        message_data="u8_lb",
+    ),
+    "device_id": SensorSchema(
+        description="Device ID code",
+        unit_of_measurement=UNIT_EMPTY,
+        accuracy_decimals=0,
+        state_class=STATE_CLASS_NONE,
+        disabled_by_default=True,
+        message="DEVICE_CONFIG",
+        keep_updated=False,
+        message_data="u8_lb",
+    ),
+    "otc_hc_ratio_ub": SensorSchema(
+        description="OTC heat curve ratio upper bound",
+        unit_of_measurement=UNIT_EMPTY,
+        accuracy_decimals=0,
+        state_class=STATE_CLASS_NONE,
+        disabled_by_default=True,
+        message="OTC_CURVE_BOUNDS",
+        keep_updated=False,
+        message_data="u8_hb",
+    ),
+    "otc_hc_ratio_lb": SensorSchema(
+        description="OTC heat curve ratio lower bound",
+        unit_of_measurement=UNIT_EMPTY,
+        accuracy_decimals=0,
+        state_class=STATE_CLASS_NONE,
+        disabled_by_default=True,
+        message="OTC_CURVE_BOUNDS",
+        keep_updated=False,
+        message_data="u8_lb",
+    ),
+}

esphome/components/opentherm/sensor/__init__.py

@@ -0,0 +1,35 @@
+from typing import Any
+
+import esphome.config_validation as cv
+from esphome.components import sensor
+from .. import const, schema, validate, generate
+
+DEPENDENCIES = [const.OPENTHERM]
+COMPONENT_TYPE = const.SENSOR
+
+
+def get_entity_validation_schema(entity: schema.SensorSchema) -> cv.Schema:
+    return sensor.sensor_schema(
+        unit_of_measurement=entity.unit_of_measurement
+        or sensor._UNDEF,  # pylint: disable=protected-access
+        accuracy_decimals=entity.accuracy_decimals,
+        device_class=entity.device_class
+        or sensor._UNDEF,  # pylint: disable=protected-access
+        icon=entity.icon or sensor._UNDEF,  # pylint: disable=protected-access
+        state_class=entity.state_class,
+    )
+
+
+CONFIG_SCHEMA = validate.create_component_schema(
+    schema.SENSORS, get_entity_validation_schema
+)
+
+
+async def to_code(config: dict[str, Any]) -> None:
+    await generate.component_to_code(
+        COMPONENT_TYPE,
+        schema.SENSORS,
+        sensor.Sensor,
+        generate.create_only_conf(sensor.new_sensor),
+        config,
+    )

esphome/components/opentherm/validate.py

@@ -0,0 +1,31 @@
+from typing import Callable
+
+from voluptuous import Schema
+
+import esphome.config_validation as cv
+
+from . import const, schema, generate
+from .schema import TSchema
+
+
+def create_entities_schema(
+    entities: dict[str, schema.EntitySchema],
+    get_entity_validation_schema: Callable[[TSchema], cv.Schema],
+) -> Schema:
+    entity_schema = {}
+    for key, entity in entities.items():
+        entity_schema[cv.Optional(key)] = get_entity_validation_schema(entity)
+    return cv.Schema(entity_schema)
+
+
+def create_component_schema(
+    entities: dict[str, schema.EntitySchema],
+    get_entity_validation_schema: Callable[[TSchema], cv.Schema],
+) -> Schema:
+    return (
+        cv.Schema(
+            {cv.GenerateID(const.CONF_OPENTHERM_ID): cv.use_id(generate.OpenthermHub)}
+        )
+        .extend(create_entities_schema(entities, get_entity_validation_schema))
+        .extend(cv.COMPONENT_SCHEMA)
+    )

esphome/components/rpi_dpi_rgb/rpi_dpi_rgb.cpp

@@ -84,6 +84,26 @@ void RpiDpiRgb::draw_pixels_at(int x_start, int y_start, int w, int h, const uin
     ESP_LOGE(TAG, "lcd_lcd_panel_draw_bitmap failed: %s", esp_err_to_name(err));
 }
 
+int RpiDpiRgb::get_width() {
+  switch (this->rotation_) {
+    case display::DISPLAY_ROTATION_90_DEGREES:
+    case display::DISPLAY_ROTATION_270_DEGREES:
+      return this->get_height_internal();
+    default:
+      return this->get_width_internal();
+  }
+}
+
+int RpiDpiRgb::get_height() {
+  switch (this->rotation_) {
+    case display::DISPLAY_ROTATION_90_DEGREES:
+    case display::DISPLAY_ROTATION_270_DEGREES:
+      return this->get_width_internal();
+    default:
+      return this->get_height_internal();
+  }
+}
+
 void RpiDpiRgb::draw_pixel_at(int x, int y, Color color) {
   if (!this->get_clipping().inside(x, y))
     return;  // NOLINT

esphome/components/rpi_dpi_rgb/rpi_dpi_rgb.h

@@ -24,6 +24,7 @@ class RpiDpiRgb : public display::Display {
   void update() override { this->do_update_(); }
   void setup() override;
   void loop() override;
+  float get_setup_priority() const override { return setup_priority::HARDWARE; }
   void draw_pixels_at(int x_start, int y_start, int w, int h, const uint8_t *ptr, display::ColorOrder order,
                       display::ColorBitness bitness, bool big_endian, int x_offset, int y_offset, int x_pad) override;
   void draw_pixel_at(int x, int y, Color color) override;
@@ -44,8 +45,8 @@ class RpiDpiRgb : public display::Display {
     this->width_ = width;
     this->height_ = height;
   }
-  int get_width() override { return this->width_; }
+  int get_width() override;
-  int get_height() override { return this->height_; }
+  int get_height() override;
   void set_hsync_back_porch(uint16_t hsync_back_porch) { this->hsync_back_porch_ = hsync_back_porch; }
   void set_hsync_front_porch(uint16_t hsync_front_porch) { this->hsync_front_porch_ = hsync_front_porch; }
   void set_hsync_pulse_width(uint16_t hsync_pulse_width) { this->hsync_pulse_width_ = hsync_pulse_width; }

esphome/components/weikai/weikai.h

@@ -209,7 +209,7 @@ class WeikaiComponent : public Component {
 
   /// @brief store the name for the component
   /// @param name the name as defined by the python code generator
-  void set_name(std::string name) { this->name_ = std::move(name); }
+  void set_name(std::string &&name) { this->name_ = std::move(name); }
 
   /// @brief Get the name of the component
   /// @return the name
@@ -308,7 +308,7 @@ class WeikaiChannel : public uart::UARTComponent {
 
   /// @brief The name as generated by the Python code generator
   /// @param name of the channel
-  void set_channel_name(std::string name) { this->name_ = std::move(name); }
+  void set_channel_name(std::string &&name) { this->name_ = std::move(name); }
 
   /// @brief Get the channel name
   /// @return the name

esphome/dashboard/core.py

@@ -5,10 +5,14 @@ from collections.abc import Coroutine
 import contextlib
 from dataclasses import dataclass
 from functools import partial
+import json
 import logging
+from pathlib import Path
 import threading
 from typing import TYPE_CHECKING, Any, Callable
 
+from esphome.storage_json import ignored_devices_storage_path
+
 from ..zeroconf import DiscoveredImport
 from .dns import DNSCache
 from .entries import DashboardEntries
@@ -20,6 +24,8 @@ if TYPE_CHECKING:
 
 _LOGGER = logging.getLogger(__name__)
 
+IGNORED_DEVICES_STORAGE_PATH = "ignored-devices.json"
+
 
 @dataclass
 class Event:
@@ -74,6 +80,7 @@ class ESPHomeDashboard:
         "settings",
         "dns_cache",
         "_background_tasks",
+        "ignored_devices",
     )
 
     def __init__(self) -> None:
@@ -89,12 +96,30 @@ class ESPHomeDashboard:
         self.settings = DashboardSettings()
         self.dns_cache = DNSCache()
         self._background_tasks: set[asyncio.Task] = set()
+        self.ignored_devices: set[str] = set()
 
     async def async_setup(self) -> None:
         """Setup the dashboard."""
         self.loop = asyncio.get_running_loop()
         self.ping_request = asyncio.Event()
         self.entries = DashboardEntries(self)
+        self.load_ignored_devices()
+
+    def load_ignored_devices(self) -> None:
+        storage_path = Path(ignored_devices_storage_path())
+        try:
+            with storage_path.open("r", encoding="utf-8") as f_handle:
+                data = json.load(f_handle)
+                self.ignored_devices = set(data.get("ignored_devices", set()))
+        except FileNotFoundError:
+            pass
+
+    def save_ignored_devices(self) -> None:
+        storage_path = Path(ignored_devices_storage_path())
+        with storage_path.open("w", encoding="utf-8") as f_handle:
+            json.dump(
+                {"ignored_devices": sorted(self.ignored_devices)}, indent=2, fp=f_handle
+            )
 
     async def async_run(self) -> None:
         """Run the dashboard."""

esphome/dashboard/web_server.py

@@ -7,6 +7,7 @@ import datetime
 import functools
 import gzip
 import hashlib
+import importlib
 import json
 import logging
 import os
@@ -541,6 +542,46 @@ class ImportRequestHandler(BaseHandler):
         self.finish()
 
 
+class IgnoreDeviceRequestHandler(BaseHandler):
+    @authenticated
+    def post(self) -> None:
+        dashboard = DASHBOARD
+        try:
+            args = json.loads(self.request.body.decode())
+            device_name = args["name"]
+            ignore = args["ignore"]
+        except (json.JSONDecodeError, KeyError):
+            self.set_status(400)
+            self.set_header("content-type", "application/json")
+            self.write(json.dumps({"error": "Invalid payload"}))
+            return
+
+        ignored_device = next(
+            (
+                res
+                for res in dashboard.import_result.values()
+                if res.device_name == device_name
+            ),
+            None,
+        )
+
+        if ignored_device is None:
+            self.set_status(404)
+            self.set_header("content-type", "application/json")
+            self.write(json.dumps({"error": "Device not found"}))
+            return
+
+        if ignore:
+            dashboard.ignored_devices.add(ignored_device.device_name)
+        else:
+            dashboard.ignored_devices.discard(ignored_device.device_name)
+
+        dashboard.save_ignored_devices()
+
+        self.set_status(204)
+        self.finish()
+
+
 class DownloadListRequestHandler(BaseHandler):
     @authenticated
     @bind_config
@@ -555,26 +596,18 @@ class DownloadListRequestHandler(BaseHandler):
 
         downloads = []
         platform: str = storage_json.target_platform.lower()
-        if platform == const.PLATFORM_RP2040:
-            from esphome.components.rp2040 import get_download_types as rp2040_types
 
-            downloads = rp2040_types(storage_json)
+        if platform.upper() in ESP32_VARIANTS:
-        elif platform == const.PLATFORM_ESP8266:
+            platform = "esp32"
-            from esphome.components.esp8266 import get_download_types as esp8266_types
-
-            downloads = esp8266_types(storage_json)
-        elif platform.upper() in ESP32_VARIANTS:
-            from esphome.components.esp32 import get_download_types as esp32_types
-
-            downloads = esp32_types(storage_json)
         elif platform in (const.PLATFORM_RTL87XX, const.PLATFORM_BK72XX):
-            from esphome.components.libretiny import (
+            platform = "libretiny"
-                get_download_types as libretiny_types,
-            )
 
-            downloads = libretiny_types(storage_json)
+        try:
-        else:
+            module = importlib.import_module(f"esphome.components.{platform}")
-            raise ValueError(f"Unknown platform {platform}")
+            get_download_types = getattr(module, "get_download_types")
+        except AttributeError as exc:
+            raise ValueError(f"Unknown platform {platform}") from exc
+        downloads = get_download_types(storage_json)
 
         self.set_status(200)
         self.set_header("content-type", "application/json")
@@ -688,6 +721,7 @@ class ListDevicesHandler(BaseHandler):
                             "project_name": res.project_name,
                             "project_version": res.project_version,
                             "network": res.network,
+                            "ignored": res.device_name in dashboard.ignored_devices,
                         }
                         for res in dashboard.import_result.values()
                         if res.device_name not in configured
@@ -1156,6 +1190,7 @@ def make_app(debug=get_bool_env(ENV_DEV)) -> tornado.web.Application:
             (f"{rel}prometheus-sd", PrometheusServiceDiscoveryHandler),
             (f"{rel}boards/([a-z0-9]+)", BoardsRequestHandler),
             (f"{rel}version", EsphomeVersionHandler),
+            (f"{rel}ignore-device", IgnoreDeviceRequestHandler),
         ],
         **app_settings,
     )

esphome/storage_json.py

@@ -28,6 +28,10 @@ def esphome_storage_path() -> str:
     return os.path.join(CORE.data_dir, "esphome.json")
 
 
+def ignored_devices_storage_path() -> str:
+    return os.path.join(CORE.data_dir, "ignored-devices.json")
+
+
 def trash_storage_path() -> str:
     return CORE.relative_config_path("trash")
 

requirements.txt

@@ -12,7 +12,7 @@ pyserial==3.5
 platformio==6.1.16  # When updating platformio, also update Dockerfile
 esptool==4.7.0
 click==8.1.7
-esphome-dashboard==20240620.0
+esphome-dashboard==20241025.0
 aioesphomeapi==24.6.2
 zeroconf==0.132.2
 puremagic==1.27

tests/components/image/common.yaml

@@ -0,0 +1,38 @@
+image:
+  - id: binary_image
+    file: ../../pnglogo.png
+    type: BINARY
+    dither: FloydSteinberg
+  - id: transparent_transparent_image
+    file: ../../pnglogo.png
+    type: TRANSPARENT_BINARY
+  - id: rgba_image
+    file: ../../pnglogo.png
+    type: RGBA
+    resize: 50x50
+  - id: rgb24_image
+    file: ../../pnglogo.png
+    type: RGB24
+    use_transparency: yes
+  - id: rgb565_image
+    file: ../../pnglogo.png
+    type: RGB565
+    use_transparency: no
+  - id: web_svg_image
+    file: https://raw.githubusercontent.com/esphome/esphome-docs/a62d7ab193c1a464ed791670170c7d518189109b/images/logo.svg
+    resize: 256x48
+    type: TRANSPARENT_BINARY
+  - id: web_tiff_image
+    file: https://upload.wikimedia.org/wikipedia/commons/b/b6/SIPI_Jelly_Beans_4.1.07.tiff
+    type: RGB24
+    resize: 48x48
+  - id: web_redirect_image
+    file: https://avatars.githubusercontent.com/u/3060199?s=48&v=4
+    type: RGB24
+    resize: 48x48
+  - id: mdi_alert
+    file: mdi:alert-circle-outline
+    resize: 50x50
+  - id: another_alert_icon
+    file: mdi:alert-outline
+    type: BINARY

tests/components/image/test.esp32-ard.yaml

@@ -13,41 +13,5 @@ display:
     reset_pin: 21
     invert_colors: true
 
-image:
+<<: !include common.yaml
-  - id: binary_image
+
-    file: ../../pnglogo.png
-    type: BINARY
-    dither: FloydSteinberg
-  - id: transparent_transparent_image
-    file: ../../pnglogo.png
-    type: TRANSPARENT_BINARY
-  - id: rgba_image
-    file: ../../pnglogo.png
-    type: RGBA
-    resize: 50x50
-  - id: rgb24_image
-    file: ../../pnglogo.png
-    type: RGB24
-    use_transparency: yes
-  - id: rgb565_image
-    file: ../../pnglogo.png
-    type: RGB565
-    use_transparency: no
-  - id: web_svg_image
-    file: https://raw.githubusercontent.com/esphome/esphome-docs/a62d7ab193c1a464ed791670170c7d518189109b/images/logo.svg
-    resize: 256x48
-    type: TRANSPARENT_BINARY
-  - id: web_tiff_image
-    file: https://upload.wikimedia.org/wikipedia/commons/b/b6/SIPI_Jelly_Beans_4.1.07.tiff
-    type: RGB24
-    resize: 48x48
-  - id: web_redirect_image
-    file: https://avatars.githubusercontent.com/u/3060199?s=48&v=4
-    type: RGB24
-    resize: 48x48
-  - id: mdi_alert
-    file: mdi:alert-circle-outline
-    resize: 50x50
-  - id: another_alert_icon
-    file: mdi:alert-outline
-    type: BINARY

tests/components/image/test.esp32-c3-ard.yaml

@@ -13,41 +13,4 @@ display:
     reset_pin: 10
     invert_colors: true
 
-image:
+<<: !include common.yaml
-  - id: binary_image
-    file: ../../pnglogo.png
-    type: BINARY
-    dither: FloydSteinberg
-  - id: transparent_transparent_image
-    file: ../../pnglogo.png
-    type: TRANSPARENT_BINARY
-  - id: rgba_image
-    file: ../../pnglogo.png
-    type: RGBA
-    resize: 50x50
-  - id: rgb24_image
-    file: ../../pnglogo.png
-    type: RGB24
-    use_transparency: yes
-  - id: rgb565_image
-    file: ../../pnglogo.png
-    type: RGB565
-    use_transparency: no
-  - id: web_svg_image
-    file: https://raw.githubusercontent.com/esphome/esphome-docs/a62d7ab193c1a464ed791670170c7d518189109b/images/logo.svg
-    resize: 256x48
-    type: TRANSPARENT_BINARY
-  - id: web_tiff_image
-    file: https://upload.wikimedia.org/wikipedia/commons/b/b6/SIPI_Jelly_Beans_4.1.07.tiff
-    type: RGB24
-    resize: 48x48
-  - id: web_redirect_image
-    file: https://avatars.githubusercontent.com/u/3060199?s=48&v=4
-    type: RGB24
-    resize: 48x48
-  - id: mdi_alert
-    file: mdi:alert-circle-outline
-    resize: 50x50
-  - id: another_alert_icon
-    file: mdi:alert-outline
-    type: BINARY

tests/components/image/test.esp32-c3-idf.yaml

@@ -13,41 +13,4 @@ display:
     reset_pin: 10
     invert_colors: true
 
-image:
+<<: !include common.yaml
-  - id: binary_image
-    file: ../../pnglogo.png
-    type: BINARY
-    dither: FloydSteinberg
-  - id: transparent_transparent_image
-    file: ../../pnglogo.png
-    type: TRANSPARENT_BINARY
-  - id: rgba_image
-    file: ../../pnglogo.png
-    type: RGBA
-    resize: 50x50
-  - id: rgb24_image
-    file: ../../pnglogo.png
-    type: RGB24
-    use_transparency: yes
-  - id: rgb565_image
-    file: ../../pnglogo.png
-    type: RGB565
-    use_transparency: no
-  - id: web_svg_image
-    file: https://raw.githubusercontent.com/esphome/esphome-docs/a62d7ab193c1a464ed791670170c7d518189109b/images/logo.svg
-    resize: 256x48
-    type: TRANSPARENT_BINARY
-  - id: web_tiff_image
-    file: https://upload.wikimedia.org/wikipedia/commons/b/b6/SIPI_Jelly_Beans_4.1.07.tiff
-    type: RGB24
-    resize: 48x48
-  - id: web_redirect_image
-    file: https://avatars.githubusercontent.com/u/3060199?s=48&v=4
-    type: RGB24
-    resize: 48x48
-  - id: mdi_alert
-    file: mdi:alert-circle-outline
-    resize: 50x50
-  - id: another_alert_icon
-    file: mdi:alert-outline
-    type: BINARY

tests/components/image/test.esp32-idf.yaml

@@ -13,41 +13,4 @@ display:
     reset_pin: 21
     invert_colors: true
 
-image:
+<<: !include common.yaml
-  - id: binary_image
-    file: ../../pnglogo.png
-    type: BINARY
-    dither: FloydSteinberg
-  - id: transparent_transparent_image
-    file: ../../pnglogo.png
-    type: TRANSPARENT_BINARY
-  - id: rgba_image
-    file: ../../pnglogo.png
-    type: RGBA
-    resize: 50x50
-  - id: rgb24_image
-    file: ../../pnglogo.png
-    type: RGB24
-    use_transparency: yes
-  - id: rgb565_image
-    file: ../../pnglogo.png
-    type: RGB565
-    use_transparency: no
-  - id: web_svg_image
-    file: https://raw.githubusercontent.com/esphome/esphome-docs/a62d7ab193c1a464ed791670170c7d518189109b/images/logo.svg
-    resize: 256x48
-    type: TRANSPARENT_BINARY
-  - id: web_tiff_image
-    file: https://upload.wikimedia.org/wikipedia/commons/b/b6/SIPI_Jelly_Beans_4.1.07.tiff
-    type: RGB24
-    resize: 48x48
-  - id: web_redirect_image
-    file: https://avatars.githubusercontent.com/u/3060199?s=48&v=4
-    type: RGB24
-    resize: 48x48
-  - id: mdi_alert
-    file: mdi:alert-circle-outline
-    resize: 50x50
-  - id: another_alert_icon
-    file: mdi:alert-outline
-    type: BINARY

tests/components/image/test.esp8266-ard.yaml

@@ -13,41 +13,4 @@ display:
     reset_pin: 16
     invert_colors: true
 
-image:
+<<: !include common.yaml
-  - id: binary_image
-    file: ../../pnglogo.png
-    type: BINARY
-    dither: FloydSteinberg
-  - id: transparent_transparent_image
-    file: ../../pnglogo.png
-    type: TRANSPARENT_BINARY
-  - id: rgba_image
-    file: ../../pnglogo.png
-    type: RGBA
-    resize: 50x50
-  - id: rgb24_image
-    file: ../../pnglogo.png
-    type: RGB24
-    use_transparency: yes
-  - id: rgb565_image
-    file: ../../pnglogo.png
-    type: RGB565
-    use_transparency: no
-  - id: web_svg_image
-    file: https://raw.githubusercontent.com/esphome/esphome-docs/a62d7ab193c1a464ed791670170c7d518189109b/images/logo.svg
-    resize: 256x48
-    type: TRANSPARENT_BINARY
-  - id: web_tiff_image
-    file: https://upload.wikimedia.org/wikipedia/commons/b/b6/SIPI_Jelly_Beans_4.1.07.tiff
-    type: RGB24
-    resize: 48x48
-  - id: web_redirect_image
-    file: https://avatars.githubusercontent.com/u/3060199?s=48&v=4
-    type: RGB24
-    resize: 48x48
-  - id: mdi_alert
-    file: mdi:alert-circle-outline
-    resize: 50x50
-  - id: another_alert_icon
-    file: mdi:alert-outline
-    type: BINARY

tests/components/image/test.host.yaml

@@ -0,0 +1,8 @@
+display:
+  - platform: sdl
+    auto_clear_enabled: false
+    dimensions:
+      width: 480
+      height: 480
+
+<<: !include common.yaml

tests/components/image/test.rp2040-ard.yaml

@@ -13,41 +13,4 @@ display:
     reset_pin: 22
     invert_colors: true
 
-image:
+<<: !include common.yaml
-  - id: binary_image
-    file: ../../pnglogo.png
-    type: BINARY
-    dither: FloydSteinberg
-  - id: transparent_transparent_image
-    file: ../../pnglogo.png
-    type: TRANSPARENT_BINARY
-  - id: rgba_image
-    file: ../../pnglogo.png
-    type: RGBA
-    resize: 50x50
-  - id: rgb24_image
-    file: ../../pnglogo.png
-    type: RGB24
-    use_transparency: yes
-  - id: rgb565_image
-    file: ../../pnglogo.png
-    type: RGB565
-    use_transparency: no
-  - id: web_svg_image
-    file: https://raw.githubusercontent.com/esphome/esphome-docs/a62d7ab193c1a464ed791670170c7d518189109b/images/logo.svg
-    resize: 256x48
-    type: TRANSPARENT_BINARY
-  - id: web_tiff_image
-    file: https://upload.wikimedia.org/wikipedia/commons/b/b6/SIPI_Jelly_Beans_4.1.07.tiff
-    type: RGB24
-    resize: 48x48
-  - id: web_redirect_image
-    file: https://avatars.githubusercontent.com/u/3060199?s=48&v=4
-    type: RGB24
-    resize: 48x48
-  - id: mdi_alert
-    file: mdi:alert-circle-outline
-    resize: 50x50
-  - id: another_alert_icon
-    file: mdi:alert-outline
-    type: BINARY

tests/components/media_player/common.yaml

@@ -27,6 +27,10 @@ media_player:
           media_player.is_idle:
       - wait_until:
           media_player.is_playing:
+      - wait_until:
+          media_player.is_announcing:
+      - wait_until:
+          media_player.is_paused:
       - media_player.volume_up:
       - media_player.volume_down:
       - media_player.volume_set: 50%

tests/components/opentherm/common.yaml

@@ -1,3 +1,76 @@
+api:
+wifi:
+  ap:
+    ssid: "Thermostat"
+    password: "MySecretThemostat"
+
 opentherm:
-  in_pin: 1
+  in_pin: 4
-  out_pin: 2
+  out_pin: 5
+  ch_enable: true
+  dhw_enable: false
+  cooling_enable: false
+  otc_active: false
+  ch2_active: true
+  summer_mode_active: true
+  dhw_block: true
+  sync_mode: true
+
+sensor:
+  - platform: opentherm
+    rel_mod_level:
+      name: "Boiler Relative modulation level"
+    ch_pressure:
+      name: "Boiler Water pressure in CH circuit"
+    dhw_flow_rate:
+      name: "Boiler Water flow rate in DHW circuit"
+    t_boiler:
+      name: "Boiler water temperature"
+    t_dhw:
+      name: "Boiler DHW temperature"
+    t_outside:
+      name: "Boiler Outside temperature"
+    t_ret:
+      name: "Boiler Return water temperature"
+    t_storage:
+      name: "Boiler Solar storage temperature"
+    t_collector:
+      name: "Boiler Solar collector temperature"
+    t_flow_ch2:
+      name: "Boiler Flow water temperature CH2 circuit"
+    t_dhw2:
+      name: "Boiler Domestic hot water temperature 2"
+    t_exhaust:
+      name: "Boiler Exhaust temperature"
+    burner_starts:
+      name: "Boiler Number of starts burner"
+    ch_pump_starts:
+      name: "Boiler Number of starts CH pump"
+    dhw_pump_valve_starts:
+      name: "Boiler Number of starts DHW pump/valve"
+    dhw_burner_starts:
+      name: "Boiler Number of starts burner during DHW mode"
+    burner_operation_hours:
+      name: "Boiler Number of hours that burner is in operation (i.e. flame on)"
+    ch_pump_operation_hours:
+      name: "Boiler Number of hours that CH pump has been running"
+    dhw_pump_valve_operation_hours:
+      name: "Boiler Number of hours that DHW pump has been running or DHW valve has been opened"
+    dhw_burner_operation_hours:
+      name: "Boiler Number of hours that burner is in operation during DHW mode"
+    t_dhw_set_ub:
+      name: "Boiler Upper bound for adjustement of DHW setpoint"
+    t_dhw_set_lb:
+      name: "Boiler Lower bound for adjustement of DHW setpoint"
+    max_t_set_ub:
+      name: "Boiler Upper bound for adjustement of max CH setpoint"
+    max_t_set_lb:
+      name: "Boiler Lower bound for adjustement of max CH setpoint"
+    t_dhw_set:
+      name: "Boiler Domestic hot water temperature setpoint"
+    max_t_set:
+      name: "Boiler Maximum allowable CH water setpoint"
+    otc_hc_ratio_ub:
+      name: "OTC heat curve ratio upper bound"
+    otc_hc_ratio_lb:
+      name: "OTC heat curve ratio lower bound"