mirror of
https://github.com/esphome/esphome.git
synced 2024-11-25 08:28:12 +01:00
Fix SCD30 configuration on ESP32 (#1830)
This commit is contained in:
parent
80ad784a4e
commit
18a8c727fa
1 changed files with 28 additions and 9 deletions
|
@ -43,14 +43,6 @@ void SCD30Component::setup() {
|
||||||
ESP_LOGD(TAG, "SCD30 Firmware v%0d.%02d", (uint16_t(raw_firmware_version[0]) >> 8),
|
ESP_LOGD(TAG, "SCD30 Firmware v%0d.%02d", (uint16_t(raw_firmware_version[0]) >> 8),
|
||||||
uint16_t(raw_firmware_version[0] & 0xFF));
|
uint16_t(raw_firmware_version[0] & 0xFF));
|
||||||
|
|
||||||
/// Sensor initialization
|
|
||||||
if (!this->write_command_(SCD30_CMD_START_CONTINUOUS_MEASUREMENTS, this->ambient_pressure_compensation_)) {
|
|
||||||
ESP_LOGE(TAG, "Sensor SCD30 error starting continuous measurements.");
|
|
||||||
this->error_code_ = MEASUREMENT_INIT_FAILED;
|
|
||||||
this->mark_failed();
|
|
||||||
return;
|
|
||||||
}
|
|
||||||
|
|
||||||
if (this->temperature_offset_ != 0) {
|
if (this->temperature_offset_ != 0) {
|
||||||
if (!this->write_command_(SCD30_CMD_TEMPERATURE_OFFSET, (uint16_t)(temperature_offset_ * 100.0))) {
|
if (!this->write_command_(SCD30_CMD_TEMPERATURE_OFFSET, (uint16_t)(temperature_offset_ * 100.0))) {
|
||||||
ESP_LOGE(TAG, "Sensor SCD30 error setting temperature offset.");
|
ESP_LOGE(TAG, "Sensor SCD30 error setting temperature offset.");
|
||||||
|
@ -59,15 +51,31 @@ void SCD30Component::setup() {
|
||||||
return;
|
return;
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
#ifdef ARDUINO_ARCH_ESP32
|
||||||
|
// According ESP32 clock stretching is typically 30ms and up to 150ms "due to
|
||||||
|
// internal calibration processes". The I2C peripheral only supports 13ms (at
|
||||||
|
// least when running at 80MHz).
|
||||||
|
// In practise it seems that clock stretching occures during this calibration
|
||||||
|
// calls. It also seems that delays in between calls makes them
|
||||||
|
// disappear/shorter. Hence work around with delays for ESP32.
|
||||||
|
//
|
||||||
|
// By experimentation a delay of 20ms as already sufficient. Let's go
|
||||||
|
// safe and use 30ms delays.
|
||||||
|
delay(30);
|
||||||
|
#endif
|
||||||
|
|
||||||
// The start measurement command disables the altitude compensation, if any, so we only set it if it's turned on
|
// The start measurement command disables the altitude compensation, if any, so we only set it if it's turned on
|
||||||
if (this->altitude_compensation_ != 0xFFFF) {
|
if (this->altitude_compensation_ != 0xFFFF) {
|
||||||
if (!this->write_command_(SCD30_CMD_ALTITUDE_COMPENSATION, altitude_compensation_)) {
|
if (!this->write_command_(SCD30_CMD_ALTITUDE_COMPENSATION, altitude_compensation_)) {
|
||||||
ESP_LOGE(TAG, "Sensor SCD30 error starting continuous measurements.");
|
ESP_LOGE(TAG, "Sensor SCD30 error setting altitude compensation.");
|
||||||
this->error_code_ = MEASUREMENT_INIT_FAILED;
|
this->error_code_ = MEASUREMENT_INIT_FAILED;
|
||||||
this->mark_failed();
|
this->mark_failed();
|
||||||
return;
|
return;
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
#ifdef ARDUINO_ARCH_ESP32
|
||||||
|
delay(30);
|
||||||
|
#endif
|
||||||
|
|
||||||
if (!this->write_command_(SCD30_CMD_AUTOMATIC_SELF_CALIBRATION, enable_asc_ ? 1 : 0)) {
|
if (!this->write_command_(SCD30_CMD_AUTOMATIC_SELF_CALIBRATION, enable_asc_ ? 1 : 0)) {
|
||||||
ESP_LOGE(TAG, "Sensor SCD30 error setting automatic self calibration.");
|
ESP_LOGE(TAG, "Sensor SCD30 error setting automatic self calibration.");
|
||||||
|
@ -75,6 +83,17 @@ void SCD30Component::setup() {
|
||||||
this->mark_failed();
|
this->mark_failed();
|
||||||
return;
|
return;
|
||||||
}
|
}
|
||||||
|
#ifdef ARDUINO_ARCH_ESP32
|
||||||
|
delay(30);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/// Sensor initialization
|
||||||
|
if (!this->write_command_(SCD30_CMD_START_CONTINUOUS_MEASUREMENTS, this->ambient_pressure_compensation_)) {
|
||||||
|
ESP_LOGE(TAG, "Sensor SCD30 error starting continuous measurements.");
|
||||||
|
this->error_code_ = MEASUREMENT_INIT_FAILED;
|
||||||
|
this->mark_failed();
|
||||||
|
return;
|
||||||
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
void SCD30Component::dump_config() {
|
void SCD30Component::dump_config() {
|
||||||
|
|
Loading…
Reference in a new issue