diff --git a/tests/test1.yaml b/tests/test1.yaml deleted file mode 100644 index 1080c84ca1..0000000000 --- a/tests/test1.yaml +++ /dev/null @@ -1,1366 +0,0 @@ -esphome: - name: test1 - platform: ESP32 - board: nodemcu-32s - on_boot: - priority: 150.0 - then: - - lambda: >- - ESP_LOGD("main", "ON BOOT!"); - on_shutdown: - then: - - lambda: >- - ESP_LOGD("main", "ON SHUTDOWN!"); - on_loop: - then: - - lambda: >- - ESP_LOGV("main", "ON LOOP!"); - - light.addressable_set: - id: addr1 - range_from: 0 - range_to: 100 - red: 100% - green: !lambda 'return 255;' - blue: 0% - white: 100% - build_path: build/test1 - -wifi: - networks: - - ssid: 'MySSID' - password: 'password1' - - ssid: 'MySSID2' - password: '' - channel: 14 - bssid: 'A1:63:95:47:D3:1D' - manual_ip: - static_ip: 192.168.178.230 - gateway: 192.168.178.1 - subnet: 255.255.255.0 - dns1: 1.1.1.1 - dns2: 1.2.2.1 - domain: .local - reboot_timeout: 120s - power_save_mode: none - -mqtt: - broker: '192.168.178.84' - port: 1883 - username: 'debug' - password: 'debug' - client_id: someclient - discovery: True - discovery_retain: False - discovery_prefix: discovery - topic_prefix: helloworld - log_topic: - topic: helloworld/hi - level: INFO - birth_message: - will_message: - shutdown_message: - topic: topic/to/send/to - payload: hi - qos: 2 - retain: True - keepalive: 60s - reboot_timeout: 60s - on_message: - - topic: my/custom/topic - qos: 0 - then: - - lambda: >- - ESP_LOGD("main", "Got message %s", x.c_str()); - - topic: livingroom/ota_mode - then: - - deep_sleep.prevent: deep_sleep_1 - - topic: livingroom/ota_mode - then: - - deep_sleep.enter: deep_sleep_1 - on_json_message: - topic: the/topic - then: - - if: - condition: - - wifi.connected: - - mqtt.connected: - - light.is_on: kitchen - - light.is_off: kitchen - then: - - lambda: |- - int data = x["my_data"]; - ESP_LOGD("main", "The data is: %d", data); - - light.turn_on: - id: living_room_lights - brightness: !lambda |- - float brightness = 1.0; - if (x.containsKey("brightness")) - brightness = x["brightness"]; - return brightness; - effect: !lambda |- - const char *effect = "None"; - if (x.containsKey("effect")) - effect = x["effect"]; - return effect; - - light.control: - id: living_room_lights - brightness: !lambda 'return id(living_room_lights).current_values.get_brightness() + 0.5;' - - light.dim_relative: - id: living_room_lights - relative_brightness: 5% - - uart.write: - id: uart0 - data: Hello World - - uart.write: [0x00, 0x20, 0x30] - - uart.write: !lambda |- - return {}; - -i2c: - sda: 21 - scl: 22 - scan: True - frequency: 100kHz - setup_priority: -100 - -spi: - clk_pin: GPIO21 - mosi_pin: GPIO22 - miso_pin: GPIO23 - -uart: - tx_pin: GPIO22 - rx_pin: GPIO23 - baud_rate: 115200 - id: uart0 - -ota: - safe_mode: True - password: 'superlongpasswordthatnoonewillknow' - port: 3286 - -logger: - baud_rate: 0 - level: VERBOSE - logs: - mqtt.component: DEBUG - mqtt.client: ERROR - -web_server: - port: 8080 - css_url: https://esphome.io/_static/webserver-v1.min.css - js_url: https://esphome.io/_static/webserver-v1.min.js - -power_supply: - id: 'atx_power_supply' - enable_time: 20ms - keep_on_time: 10s - pin: - number: 13 - inverted: true - -deep_sleep: - run_duration: 20s - sleep_duration: 50s - wakeup_pin: GPIO39 - wakeup_pin_mode: INVERT_WAKEUP - id: deep_sleep_1 - -ads1115: - address: 0x48 - -dallas: - pin: GPIO23 - -sensor: - - platform: adc - pin: A0 - name: "Living Room Brightness" - update_interval: '1:01' - attenuation: 2.5db - unit_of_measurement: "°C" - icon: "mdi:water-percent" - accuracy_decimals: 5 - expire_after: 120s - setup_priority: -100 - filters: - - offset: 2.0 - - multiply: 1.2 - - calibrate_linear: - - 0.0 -> 0.0 - - 40.0 -> 45.0 - - 100.0 -> 102.5 - - filter_out: 42.0 - - filter_out: nan - - sliding_window_moving_average: - window_size: 15 - send_every: 15 - send_first_at: 15 - - exponential_moving_average: - alpha: 0.1 - send_every: 15 - - throttle: 1s - - heartbeat: 5s - - debounce: 0.1s - - delta: 5.0 - - or: - - throttle: 1s - - delta: 5.0 - - lambda: return x * (9.0/5.0) + 32.0; - on_value: - then: - - lambda: |- - ESP_LOGD("main", "Got value %f", x); - id(my_sensor).publish_state(42.0); - ESP_LOGI("main", "Value of my sensor: %f", id(my_sensor).state); - ESP_LOGI("main", "Raw Value of my sensor: %f", id(my_sensor).state); - on_value_range: - above: 5 - below: 10 - then: - - lambda: >- - ESP_LOGD("main", "Got value range %f", x); - - wait_until: - binary_sensor.is_on: binary_sensor1 - on_raw_value: - - lambda: >- - ESP_LOGD("main", "Got raw value %f", x); - - logger.log: - level: DEBUG - format: "Got raw value %f" - args: ['x'] - - logger.log: "Got raw value NAN" - - mqtt.publish: - topic: some/topic - payload: Hello - qos: 2 - retain: True - - platform: esp32_hall - name: ESP32 Hall Sensor - - platform: ads1115 - multiplexer: 'A0_A1' - gain: 1.024 - id: my_sensor - filters: - state_topic: hi/me - retain: false - availability: - - platform: atm90e32 - cs_pin: 5 - phase_a: - voltage: - name: "EMON Line Voltage A" - current: - name: "EMON CT1 Current" - power: - name: "EMON Active Power CT1" - gain_voltage: 47660 - gain_ct: 12577 - phase_b: - current: - name: "EMON CT2 Current" - power: - name: "EMON Active Power CT2" - gain_voltage: 47660 - gain_ct: 12577 - phase_c: - current: - name: "EMON CT3 Current" - power: - name: "EMON Active Power CT3" - gain_voltage: 47660 - gain_ct: 12577 - frequency: - name: "EMON Line Frequency" - line_frequency: 50Hz - gain_pga: 2X - - platform: bh1750 - name: "Living Room Brightness 3" - internal: true - address: 0x23 - resolution: 1.0 - update_interval: 30s - retain: False - availability: - state_topic: livingroom/custom_state_topic - - platform: bme280 - temperature: - name: "Outside Temperature" - oversampling: 16x - pressure: - name: "Outside Pressure" - oversampling: none - humidity: - name: "Outside Humidity" - oversampling: 8x - address: 0x77 - iir_filter: 16x - update_interval: 15s - - platform: bme680 - temperature: - name: "Outside Temperature" - oversampling: 16x - pressure: - name: "Outside Pressure" - humidity: - name: "Outside Humidity" - gas_resistance: - name: "Outside Gas Sensor" - address: 0x77 - heater: - temperature: 320 - duration: 150ms - update_interval: 15s - - platform: bmp085 - temperature: - name: "Outside Temperature" - pressure: - name: "Outside Pressure" - filters: - - lambda: >- - return x / powf(1.0 - (x / 44330.0), 5.255); - update_interval: 15s - - platform: bmp280 - temperature: - name: "Outside Temperature" - oversampling: 16x - pressure: - name: "Outside Pressure" - address: 0x77 - update_interval: 15s - iir_filter: 16x - - platform: dallas - address: 0x1C0000031EDD2A28 - name: "Living Room Temperature" - resolution: 9 - - platform: dallas - index: 1 - name: "Living Room Temperature 2" - - platform: dht - pin: GPIO26 - temperature: - name: "Living Room Temperature 3" - humidity: - name: "Living Room Humidity 3" - model: AM2302 - update_interval: 15s - - platform: dht12 - temperature: - name: "Living Room Temperature 4" - humidity: - name: "Living Room Humidity 4" - update_interval: 15s - - platform: duty_cycle - pin: GPIO25 - name: Duty Cycle Sensor - - platform: esp32_hall - name: "ESP32 Hall Sensor" - update_interval: 15s - - platform: hdc1080 - temperature: - name: "Living Room Temperature 5" - humidity: - name: "Living Room Pressure 5" - update_interval: 15s - - platform: hlw8012 - sel_pin: 5 - cf_pin: 14 - cf1_pin: 13 - current: - name: "HLW8012 Current" - voltage: - name: "HLW8012 Voltage" - power: - name: "HLW8012 Power" - id: hlw8012_power - update_interval: 15s - current_resistor: 0.001 ohm - voltage_divider: 2351 - change_mode_every: 16 - initial_mode: VOLTAGE - - platform: total_daily_energy - power_id: hlw8012_power - name: "HLW8012 Total Daily Energy" - - platform: integration - sensor: hlw8012_power - name: "Integration Sensor" - time_unit: s - - platform: hmc5883l - address: 0x68 - field_strength_x: - name: "HMC5883L Field Strength X" - field_strength_y: - name: "HMC5883L Field Strength Y" - field_strength_z: - name: "HMC5883L Field Strength Z" - heading: - name: "HMC5883L Heading" - range: 130uT - update_interval: 15s - - platform: hx711 - name: "HX711 Value" - dout_pin: GPIO23 - clk_pin: GPIO24 - gain: 128 - update_interval: 15s - - platform: ina219 - address: 0x40 - shunt_resistance: 0.1 ohm - current: - name: "INA219 Current" - power: - name: "INA219 Power" - bus_voltage: - name: "INA219 Bus Voltage" - shunt_voltage: - name: "INA219 Shunt Voltage" - max_voltage: 32.0V - max_current: 3.2A - update_interval: 15s - - platform: ina3221 - address: 0x40 - channel_1: - shunt_resistance: 0.1 ohm - current: - name: "INA3221 Channel 1 Current" - power: - name: "INA3221 Channel 1 Power" - bus_voltage: - name: "INA3221 Channel 1 Bus Voltage" - shunt_voltage: - name: "INA3221 Channel 1 Shunt Voltage" - update_interval: 15s - - platform: htu21d - temperature: - name: "Living Room Temperature 6" - humidity: - name: "Living Room Humidity 6" - update_interval: 15s - - platform: max6675 - name: "Living Room Temperature" - cs_pin: GPIO23 - update_interval: 15s - - platform: max31855 - name: "Den Temperature" - cs_pin: GPIO23 - update_interval: 15s - - platform: mhz19 - co2: - name: "MH-Z19 CO2 Value" - temperature: - name: "MH-Z19 Temperature" - update_interval: 15s - - platform: mpu6050 - address: 0x68 - accel_x: - name: "MPU6050 Accel X" - accel_y: - name: "MPU6050 Accel Y" - accel_z: - name: "MPU6050 Accel z" - gyro_x: - name: "MPU6050 Gyro X" - gyro_y: - name: "MPU6050 Gyro Y" - gyro_z: - name: "MPU6050 Gyro z" - temperature: - name: "MPU6050 Temperature" - - platform: ms5611 - temperature: - name: "Outside Temperature" - pressure: - name: "Outside Pressure" - address: 0x77 - update_interval: 15s - - platform: pulse_counter - name: "Pulse Counter" - pin: GPIO12 - count_mode: - rising_edge: INCREMENT - falling_edge: DECREMENT - internal_filter: 13us - update_interval: 15s - - platform: rotary_encoder - name: "Rotary Encoder" - pin_a: GPIO23 - pin_b: GPIO24 - pin_reset: GPIO25 - filters: - - or: - - debounce: 0.1s - - delta: 10 - resolution: 4 - min_value: -10 - max_value: 30 - - platform: pulse_width - name: Pulse Width - pin: GPIO12 - - platform: sht3xd - temperature: - name: "Living Room Temperature 8" - humidity: - name: "Living Room Humidity 8" - address: 0x44 - update_interval: 15s - - platform: sts3x - temperature: - name: "Living Room Temperature 9" - address: 0x4A - update_interval: 15s - - platform: template - name: "Template Sensor" - id: template_sensor - lambda: |- - if (id(ultrasonic_sensor1).state > 1) { - return 42.0; - } else { - return {}; - } - update_interval: 15s - on_value: - - sensor.template.publish: - id: template_sensor - state: 43.0 - - sensor.template.publish: - id: template_sensor - state: !lambda 'return NAN;' - - platform: tsl2561 - name: "TSL2561 Ambient Light" - address: 0x39 - update_interval: 15s - is_cs_package: true - integration_time: 402ms - gain: 16x - - platform: ultrasonic - trigger_pin: GPIO24 - echo_pin: - number: GPIO23 - inverted: true - name: "Ultrasonic Sensor" - timeout: 5.5m - id: ultrasonic_sensor1 - - platform: uptime - name: Uptime Sensor - - platform: wifi_signal - name: "WiFi Signal Sensor" - update_interval: 15s - - platform: mqtt_subscribe - name: "MQTT Subscribe Sensor 1" - topic: "mqtt/topic" - id: the_sensor - qos: 2 - on_value: - - mqtt.publish_json: - topic: the/topic - payload: |- - root["key"] = id(the_sensor).state; - root["greeting"] = "Hello World"; - - platform: sds011 - pm_2_5: - name: "SDS011 PM2.5" - pm_10_0: - name: "SDS011 PM10.0" - update_interval: 5min - rx_only: false - - platform: ccs811 - eco2: - name: CCS811 eCO2 - tvoc: - name: CCS811 TVOC - update_interval: 30s - baseline: 0x4242 - - platform: tx20 - wind_speed: - name: "Windspeed" - wind_direction_degrees: - name: "Winddirection Degrees" - pin: - number: GPIO04 - mode: INPUT - - platform: zyaura - clock_pin: GPIO5 - data_pin: GPIO4 - co2: - name: "ZyAura CO2" - temperature: - name: "ZyAura Temperature" - humidity: - name: "ZyAura Humidity" - - -esp32_touch: - setup_mode: False - iir_filter: 10ms - sleep_duration: 27ms - measurement_duration: 8ms - low_voltage_reference: 0.5V - high_voltage_reference: 2.7V - voltage_attenuation: 1.5V - -binary_sensor: - - platform: gpio - pin: GPIO9 - name: "Living Room Window" - device_class: window - filters: - - invert: - - delayed_on: 40ms - - delayed_off: 40ms - on_press: - then: - - lambda: >- - ESP_LOGD("main", "Pressed"); - on_release: - then: - - lambda: >- - ESP_LOGD("main", "Released"); - on_click: - - min_length: 50ms - max_length: 350ms - then: - - lambda: >- - ESP_LOGD("main", "Clicked"); - - then: - - lambda: >- - ESP_LOGD("main", "Clicked"); - on_double_click: - - min_length: 50ms - max_length: 350ms - then: - - lambda: >- - ESP_LOGD("main", "Double Clicked"); - - then: - - lambda: >- - ESP_LOGD("main", "Double Clicked"); - on_multi_click: - - timing: - - ON for at most 1s - - OFF for at most 1s - - ON for at most 1s - - OFF for at least 0.2s - then: - - logger.log: - format: "Multi Clicked TWO" - level: warn - - timing: - - OFF for 1s to 2s - - ON for 1s to 2s - - OFF for at least 0.5s - then: - - logger.log: - format: "Multi Clicked LONG SINGLE" - level: warn - - timing: - - ON for at most 1s - - OFF for at least 0.5s - then: - - logger.log: - format: "Multi Clicked SINGLE" - level: warn - id: binary_sensor1 - - platform: gpio - pin: - number: GPIO9 - mode: INPUT_PULLUP - name: "Living Room Window 2" - - platform: status - name: "Living Room Status" - - platform: esp32_touch - name: "ESP32 Touch Pad GPIO27" - pin: GPIO27 - threshold: 1000 - id: btn_left - - platform: nextion - page_id: 0 - component_id: 2 - name: "Nextion Component 2 Touch" - - platform: template - name: "Garage Door Open" - id: garage_door - lambda: |- - if (isnan(id(my_sensor).state)) { - // isnan checks if the ultrasonic sensor echo - // has timed out, resulting in a NaN (not a number) state - // in that case, return {} to indicate that we don't know. - return {}; - } else if (id(my_sensor).state > 30) { - // Garage Door is open. - return true; - } else { - // Garage Door is closed. - return false; - } - on_press: - - binary_sensor.template.publish: - id: garage_door - state: OFF - - platform: pn532 - uid: 74-10-37-94 - name: "PN532 NFC Tag" - - platform: rdm6300 - uid: 7616525 - name: "RDM6300 NFC Tag" - - platform: gpio - name: "PCF binary sensor" - pin: - pcf8574: pcf8574_hub - number: 1 - mode: INPUT - inverted: True - - platform: gpio - name: "MCP binary sensor" - pin: - mcp23017: mcp23017_hub - number: 1 - mode: INPUT - inverted: True - - platform: remote_receiver - name: "Raw Remote Receiver Test" - raw: - code: [5685, -4252, 1711, -2265, 1712, -2265, 1711, -2264, 1712, -2266, - 3700, -2263, 1712, -4254, 1711, -4249, 1715, -2266, 1710, -2267, - 1709, -2265, 3704, -4250, 1712, -4254, 3700, -2260, 1714, -2265, - 1712, -2262, 1714, -2267, 1709] - -pca9685: - frequency: 500 - address: 0x0 - -my9231: - data_pin: GPIO12 - clock_pin: GPIO14 - num_channels: 6 - num_chips: 2 - bit_depth: 16 - -output: - - platform: gpio - pin: GPIO26 - id: gpio_26 - power_supply: atx_power_supply - inverted: False - - platform: ledc - pin: 19 - id: gpio_19 - frequency: 1500Hz - bit_depth: 8 - channel: 14 - max_power: 0.5 - - platform: pca9685 - id: pca_0 - channel: 0 - - platform: pca9685 - id: pca_1 - channel: 1 - - platform: pca9685 - id: pca_2 - channel: 2 - - platform: pca9685 - id: pca_3 - channel: 3 - - platform: pca9685 - id: pca_4 - channel: 4 - - platform: pca9685 - id: pca_5 - channel: 5 - - platform: pca9685 - id: pca_6 - channel: 6 - - platform: pca9685 - id: pca_7 - channel: 7 - - platform: gpio - id: id2 - pin: - pcf8574: pcf8574_hub - number: 0 - mode: OUTPUT - inverted: False - - platform: gpio - id: id22 - pin: - mcp23017: mcp23017_hub - number: 0 - mode: OUTPUT - inverted: False - - platform: my9231 - id: my_0 - channel: 0 - - platform: my9231 - id: my_1 - channel: 1 - - platform: my9231 - id: my_2 - channel: 2 - - platform: my9231 - id: my_3 - channel: 3 - - platform: my9231 - id: my_4 - channel: 4 - - platform: my9231 - id: my_5 - channel: 5 - -light: - - platform: binary - name: "Desk Lamp" - output: gpio_26 - effects: - - strobe: - - strobe: - name: "My Strobe" - colors: - - state: True - duration: 250ms - - state: False - duration: 250ms - - platform: monochromatic - name: "Kitchen Lights" - id: kitchen - output: gpio_19 - gamma_correct: 2.8 - default_transition_length: 2s - effects: - - strobe: - - flicker: - - flicker: - name: "My Flicker" - alpha: 98% - intensity: 1.5% - - lambda: - name: My Custom Effect - update_interval: 1s - lambda: |- - static int state = 0; - state += 1; - if (state == 4) - state = 0; - - platform: rgb - name: "Living Room Lights" - id: living_room_lights - red: pca_0 - green: pca_1 - blue: pca_2 - - platform: rgbw - name: "Living Room Lights 2" - red: pca_3 - green: pca_4 - blue: pca_5 - white: pca_6 - - platform: rgbww - name: "Living Room Lights 2" - red: pca_3 - green: pca_4 - blue: pca_5 - cold_white: pca_6 - warm_white: pca_6 - cold_white_color_temperature: 153 mireds - warm_white_color_temperature: 500 mireds - - platform: cwww - name: "Living Room Lights 2" - cold_white: pca_6 - warm_white: pca_6 - cold_white_color_temperature: 153 mireds - warm_white_color_temperature: 500 mireds - - platform: fastled_clockless - id: addr1 - chipset: WS2811 - pin: GPIO23 - num_leds: 60 - rgb_order: BRG - max_refresh_rate: 20ms - power_supply: atx_power_supply - color_correct: [75%, 100%, 50%] - name: "FastLED WS2811 Light" - effects: - - addressable_color_wipe: - - addressable_color_wipe: - name: Color Wipe Effect With Custom Values - colors: - - red: 100% - green: 100% - blue: 100% - num_leds: 1 - - red: 0% - green: 0% - blue: 0% - num_leds: 1 - add_led_interval: 100ms - reverse: False - - addressable_scan: - - addressable_scan: - name: Scan Effect With Custom Values - move_interval: 100ms - - addressable_twinkle: - - addressable_twinkle: - name: Twinkle Effect With Custom Values - twinkle_probability: 5% - progress_interval: 4ms - - addressable_random_twinkle: - - addressable_random_twinkle: - name: Random Twinkle Effect With Custom Values - twinkle_probability: 5% - progress_interval: 32ms - - addressable_fireworks: - - addressable_fireworks: - name: Fireworks Effect With Custom Values - update_interval: 32ms - spark_probability: 10% - use_random_color: false - fade_out_rate: 120 - - addressable_flicker: - - addressable_flicker: - name: Flicker Effect With Custom Values - update_interval: 16ms - intensity: 5% - - addressable_lambda: - name: "Test For Custom Lambda Effect" - lambda: |- - it[0] = current_color; - - - automation: - name: Custom Effect - sequence: - - light.addressable_set: - id: addr1 - red: 100% - green: 100% - blue: 0% - - delay: 100ms - - light.addressable_set: - id: addr1 - red: 0% - green: 100% - blue: 0% - - platform: fastled_spi - id: addr2 - chipset: WS2801 - data_pin: GPIO23 - clock_pin: GPIO22 - num_leds: 60 - rgb_order: BRG - name: "FastLED SPI Light" - - platform: neopixelbus - id: addr3 - name: "Neopixelbus Light" - gamma_correct: 2.8 - color_correct: [0.0, 0.0, 0.0, 0.0] - default_transition_length: 10s - power_supply: atx_power_supply - effects: - - addressable_flicker: - name: Flicker Effect With Custom Values - update_interval: 16ms - intensity: 5% - type: GRBW - variant: SK6812 - method: ESP32_I2S_0 - num_leds: 60 - pin: GPIO23 - - platform: partition - name: "Partition Light" - segments: - - id: addr1 - from: 0 - to: 0 - - id: addr2 - from: 1 - to: 10 - - id: addr2 - from: 20 - to: 25 - -remote_transmitter: - - pin: 32 - carrier_duty_percent: 100% - -climate: - - platform: tcl112 - name: TCL112 Climate With Sensor - supports_heat: True - supports_cool: True - sensor: my_sensor - - platform: tcl112 - name: TCL112 Climate - - platform: coolix - name: Coolix Climate With Sensor - supports_heat: True - supports_cool: True - sensor: my_sensor - - platform: coolix - name: Coolix Climate - -switch: - - platform: gpio - pin: GPIO25 - name: "Living Room Dehumidifier" - icon: "mdi:restart" - inverted: True - command_topic: custom_command_topic - restore_mode: ALWAYS_OFF - - platform: template - name: JVC Off - id: living_room_lights_on - turn_on_action: - remote_transmitter.transmit_jvc: - data: 0x10EF - - platform: template - name: NEC - id: living_room_lights_off - turn_on_action: - remote_transmitter.transmit_nec: - address: 0x4242 - command: 0x8484 - - platform: template - name: LG - turn_on_action: - remote_transmitter.transmit_lg: - data: 4294967295 - nbits: 28 - - platform: template - name: Samsung - turn_on_action: - remote_transmitter.transmit_samsung: - data: 0xABCDEF - - platform: template - name: Sony - turn_on_action: - remote_transmitter.transmit_sony: - data: 0xABCDEF - nbits: 12 - - platform: template - name: Panasonic - turn_on_action: - remote_transmitter.transmit_panasonic: - address: 0x4004 - command: 0x1000BCD - - platform: template - name: RC Switch Raw - turn_on_action: - remote_transmitter.transmit_rc_switch_raw: - code: '00101001100111110101xxxx' - protocol: 1 - - platform: template - name: RC Switch Type A - turn_on_action: - remote_transmitter.transmit_rc_switch_type_a: - group: '11001' - device: '01000' - state: True - protocol: - pulse_length: 175 - sync: [1, 31] - zero: [1, 3] - one: [3, 1] - inverted: False - - platform: template - name: RC Switch Type B - turn_on_action: - remote_transmitter.transmit_rc_switch_type_b: - address: 4 - channel: 2 - state: True - - platform: template - name: RC Switch Type C - turn_on_action: - remote_transmitter.transmit_rc_switch_type_c: - family: 'a' - group: 1 - device: 2 - state: True - - platform: template - name: RC Switch Type D - turn_on_action: - remote_transmitter.transmit_rc_switch_type_d: - group: 'a' - device: 2 - state: True - - platform: template - name: RC5 - turn_on_action: - remote_transmitter.transmit_rc5: - address: 0x00 - command: 0x0B - - platform: template - name: RC5 - turn_on_action: - remote_transmitter.transmit_raw: - code: [1000, -1000] - - platform: template - name: Living Room Lights - id: livingroom_lights - optimistic: True - assumed_state: yes - turn_on_action: - - switch.turn_on: living_room_lights_on - - output.set_level: - id: gpio_19 - level: 50% - - output.set_level: - id: gpio_19 - level: !lambda 'return 0.5;' - turn_off_action: - - switch.turn_on: living_room_lights_off - restore_state: False - on_turn_on: - - switch.template.publish: - id: livingroom_lights - state: yes - - platform: restart - name: "Living Room Restart" - - platform: shutdown - name: "Living Room Shutdown" - - platform: output - name: "Generic Output" - output: pca_6 - - platform: template - name: "Template Switch" - id: my_switch - lambda: |- - if (id(binary_sensor1).state) { - return true; - } else { - return {}; - } - id(my_switch).publish_state(false); - id(my_switch).publish_state(true); - if (id(my_switch).state) { - // Switch is ON, do something here - id(my_switch).turn_off(); - id(my_switch).turn_on(); - } else { - // Switch is OFF, do something else here - } - optimistic: true - assumed_state: no - restore_state: True - on_turn_off: - - switch.template.publish: - id: my_switch - state: !lambda 'return false;' - - platform: uart - name: "UART String Output" - data: 'DataToSend' - - platform: uart - name: "UART Bytes Output" - data: [0xDE, 0xAD, 0xBE, 0xEF] - - platform: template - assumed_state: yes - name: Stepper Switch - turn_on_action: - - stepper.set_target: - id: my_stepper - target: !lambda |- - static int32_t i = 0; - i += 1000; - if (i > 5000) { - i = -5000; - } - return i; - - stepper.report_position: - id: my_stepper - position: 0 - -fan: - - platform: binary - output: gpio_26 - name: "Living Room Fan 1" - - platform: speed - output: pca_6 - name: "Living Room Fan 2" - speed: - low: 0.45 - medium: 0.75 - high: 1.0 - -interval: - - interval: 10s - then: - - display.page.show: !lambda |- - if (true) return id(page1); else return id(page2); - - display.page.show_next: display1 - - display.page.show_previous: display1 - - interval: 2s - then: - - lambda: |- - static uint16_t btn_left_state = id(btn_left)->get_value(); - - ESP_LOGD("adaptive touch", "___ Touch Pad '%s' (T%u): val: %u state: %u tres:%u", id(btn_left)->get_name().c_str(), id(btn_left)->get_touch_pad(), id(btn_left)->get_value(), btn_left_state, id(btn_left)->get_threshold()); - - btn_left_state = ((uint32_t) id(btn_left)->get_value() + 63 * (uint32_t)btn_left_state) >> 6; - - id(btn_left)->set_threshold(btn_left_state * 0.9); - -display: -- platform: lcd_gpio - dimensions: 18x4 - data_pins: - - GPIO19 - - GPIO20 - - GPIO21 - - GPIO22 - enable_pin: GPIO23 - rs_pin: GPIO24 - lambda: |- - it.print("Hello World!"); -- platform: lcd_pcf8574 - dimensions: 18x4 - address: 0x3F - lambda: |- - it.print("Hello World!"); -- platform: max7219 - cs_pin: GPIO23 - num_chips: 1 - lambda: |- - it.print("01234567"); -- platform: nextion - lambda: |- - it.set_component_value("gauge", 50); - it.set_component_text("textview", "Hello World!"); -- platform: ssd1306_i2c - model: "SSD1306 128x64" - reset_pin: GPIO23 - address: 0x3C - id: display1 - pages: - - id: page1 - lambda: |- - it.rectangle(0, 0, it.get_width(), it.get_height()); - - id: page2 - lambda: |- - // Nothing -- platform: ssd1306_spi - model: "SSD1306 128x64" - cs_pin: GPIO23 - dc_pin: GPIO23 - reset_pin: GPIO23 - lambda: |- - it.rectangle(0, 0, it.get_width(), it.get_height()); -- platform: waveshare_epaper - cs_pin: GPIO23 - dc_pin: GPIO23 - busy_pin: GPIO23 - reset_pin: GPIO23 - model: 2.90in - full_update_every: 30 - lambda: |- - it.rectangle(0, 0, it.get_width(), it.get_height()); - -remote_receiver: - pin: GPIO32 - dump: all - -status_led: - pin: GPIO2 - -pn532: - cs_pin: GPIO23 - update_interval: 1s - on_tag: - - lambda: |- - ESP_LOGD("main", "Found tag %s", x.c_str()); - - mqtt.publish: - topic: the/topic - payload: !lambda 'return x;' - -rdm6300: - -gps: - -time: -- platform: sntp - id: sntp_time - servers: - - 0.pool.ntp.org - - 1.pool.ntp.org - - 192.168.178.1 - on_time: - cron: '/30 0-30,30/5 * ? JAN-DEC MON,SAT-SUN,TUE-FRI' - then: - - lambda: 'ESP_LOGD("main", "time");' -- platform: gps - -cover: - - platform: template - name: "Template Cover" - id: template_cover - lambda: |- - if (id(binary_sensor1).state) { - return COVER_OPEN; - } else { - return {}; - } - optimistic: true - open_action: - - cover.template.publish: - id: template_cover - state: CLOSED - assumed_state: no - -debug: - -pcf8574: - - id: 'pcf8574_hub' - address: 0x21 - pcf8575: False - -mcp23017: - - id: 'mcp23017_hub' - -stepper: -- platform: a4988 - id: my_stepper - step_pin: GPIO23 - dir_pin: GPIO24 - sleep_pin: GPIO25 - max_speed: 250 steps/s - acceleration: 100 steps/s^2 - deceleration: 200 steps/s^2 - - -globals: -- id: glob_int - type: int - restore_value: yes - initial_value: '0' -- id: glob_float - type: float - restore_value: yes - initial_value: '0.0f' -- id: glob_bool - type: bool - restore_value: no - initial_value: 'true' -- id: glob_string - type: std::string - restore_value: no - # initial_value: "" - -text_sensor: -- platform: mqtt_subscribe - name: "MQTT Subscribe Text" - topic: "the/topic" - qos: 2 - on_value: - - text_sensor.template.publish: - id: template_text - state: Hello World - - text_sensor.template.publish: - id: template_text - state: |- - return "Hello World2"; - - globals.set: - id: glob_int - value: '0' -- platform: template - name: Template Text Sensor - id: template_text -- platform: wifi_info - ip_address: - name: "IP Address" - ssid: - name: "SSID" - bssid: - name: "BSSID"