Home-IoT/esphome
1
0
Fork 0
mirror of https://github.com/esphome/esphome.git synced 2024-11-24 16:08:10 +01:00
Code Issues Projects Releases Packages Wiki Activity Actions 4

Merge branch 'dev' into dev

Browse source
This commit is contained in:
CptSkippy 2024-06-05 06:10:45 -07:00 committed by GitHub
commit 373755ca22
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
16 changed files with 259 additions and 168 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

29
esphome/components/ethernet/__init__.py
View file

@ -11,6 +11,7 @@ from esphome.components.esp32.const import (
from esphome.const import (
CONF_DOMAIN,
CONF_ID,
CONF_VALUE,
CONF_MANUAL_IP,
CONF_STATIC_IP,
CONF_TYPE,
@ -26,6 +27,8 @@ from esphome.const import (
CONF_INTERRUPT_PIN,
CONF_RESET_PIN,
CONF_SPI,
CONF_PAGE_ID,
CONF_ADDRESS,
)
from esphome.core import CORE, coroutine_with_priority
from esphome.components.network import IPAddress
@ -36,11 +39,13 @@ DEPENDENCIES = ["esp32"]
AUTO_LOAD = ["network"]
ethernet_ns = cg.esphome_ns.namespace("ethernet")
PHYRegister = ethernet_ns.struct("PHYRegister")
CONF_PHY_ADDR = "phy_addr"
CONF_MDC_PIN = "mdc_pin"
CONF_MDIO_PIN = "mdio_pin"
CONF_CLK_MODE = "clk_mode"
CONF_POWER_PIN = "power_pin"
CONF_PHY_REGISTERS = "phy_registers"
CONF_CLOCK_SPEED = "clock_speed"
@ -117,6 +122,13 @@ BASE_SCHEMA = cv.Schema(
}
).extend(cv.COMPONENT_SCHEMA)
PHY_REGISTER_SCHEMA = cv.Schema(
{
cv.Required(CONF_ADDRESS): cv.hex_int,
cv.Required(CONF_VALUE): cv.hex_int,
cv.Optional(CONF_PAGE_ID): cv.hex_int,
}
)
RMII_SCHEMA = BASE_SCHEMA.extend(
cv.Schema(
{
@ -127,6 +139,7 @@ RMII_SCHEMA = BASE_SCHEMA.extend(
),
cv.Optional(CONF_PHY_ADDR, default=0): cv.int_range(min=0, max=31),
cv.Optional(CONF_POWER_PIN): pins.internal_gpio_output_pin_number,
cv.Optional(CONF_PHY_REGISTERS): cv.ensure_list(PHY_REGISTER_SCHEMA),
}
)
)
@ -198,6 +211,15 @@ def manual_ip(config):
)
def phy_register(address: int, value: int, page: int):
return cg.StructInitializer(
PHYRegister,
("address", address),
("value", value),
("page", page),
)
@coroutine_with_priority(60.0)
async def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
@ -225,6 +247,13 @@ async def to_code(config):
cg.add(var.set_clk_mode(*CLK_MODES[config[CONF_CLK_MODE]]))
if CONF_POWER_PIN in config:
cg.add(var.set_power_pin(config[CONF_POWER_PIN]))
for register_value in config.get(CONF_PHY_REGISTERS, []):
reg = phy_register(
register_value.get(CONF_ADDRESS),
register_value.get(CONF_VALUE),
register_value.get(CONF_PAGE_ID),
)
cg.add(var.add_phy_register(reg))
cg.add(var.set_type(ETHERNET_TYPES[config[CONF_TYPE]]))
cg.add(var.set_use_address(config[CONF_USE_ADDRESS]))

58
esphome/components/ethernet/ethernet_component.cpp
View file

@ -195,9 +195,9 @@ void EthernetComponent::setup() {
// KSZ8081RNA default is incorrect. It expects a 25MHz clock instead of the 50MHz we provide.
this->ksz8081_set_clock_reference_(mac);
}
if (this->type_ == ETHERNET_TYPE_RTL8201 && this->clk_mode_ == EMAC_CLK_EXT_IN) {
// Change in default behavior of RTL8201FI may require register setting to enable external clock
this->rtl8201_set_rmii_mode_(mac);
for (const auto &phy_register : this->phy_registers_) {
this->write_phy_register_(mac, phy_register);
}
#endif
@ -527,6 +527,7 @@ void EthernetComponent::set_clk_mode(emac_rmii_clock_mode_t clk_mode, emac_rmii_
this->clk_mode_ = clk_mode;
this->clk_gpio_ = clk_gpio;
}
void EthernetComponent::add_phy_register(PHYRegister register_value) { this->phy_registers_.push_back(register_value); }
#endif
void EthernetComponent::set_type(EthernetType type) { this->type_ = type; }
void EthernetComponent::set_manual_ip(const ManualIP &manual_ip) { this->manual_ip_ = manual_ip; }
@ -613,44 +614,27 @@ void EthernetComponent::ksz8081_set_clock_reference_(esp_eth_mac_t *mac) {
ESP_LOGVV(TAG, "KSZ8081 PHY Control 2: %s", format_hex_pretty((u_int8_t *) &phy_control_2, 2).c_str());
}
}
constexpr uint8_t RTL8201_RMSR_REG_ADDR = 0x10;
void EthernetComponent::rtl8201_set_rmii_mode_(esp_eth_mac_t *mac) {
void EthernetComponent::write_phy_register_(esp_eth_mac_t *mac, PHYRegister register_data) {
esp_err_t err;
uint32_t phy_rmii_mode;
err = mac->write_phy_reg(mac, this->phy_addr_, 0x1f, 0x07);
ESPHL_ERROR_CHECK(err, "Setting Page 7 failed");
constexpr uint8_t eth_phy_psr_reg_addr = 0x1F;
/*
* RTL8201 RMII Mode Setting Register (RMSR)
* Page 7 Register 16
*
* bit 0 Reserved 0
* bit 1 Rg_rmii_rxdsel 1 (default)
* bit 2 Rg_rmii_rxdv_sel: 0 (default)
* bit 3 RMII Mode: 1 (RMII Mode)
* bit 4~7 Rg_rmii_rx_offset: 1111 (default)
* bit 8~11 Rg_rmii_tx_offset: 1111 (default)
* bit 12 Rg_rmii_clkdir: 1 (Input)
* bit 13~15 Reserved 000
*
* Binary: 0001 1111 1111 1010
* Hex: 0x1FFA
*
*/
if (this->type_ == ETHERNET_TYPE_RTL8201 && register_data.page) {
ESP_LOGD(TAG, "Select PHY Register Page: 0x%02" PRIX32, register_data.page);
err = mac->write_phy_reg(mac, this->phy_addr_, eth_phy_psr_reg_addr, register_data.page);
ESPHL_ERROR_CHECK(err, "Select PHY Register page failed");
}
err = mac->read_phy_reg(mac, this->phy_addr_, RTL8201_RMSR_REG_ADDR, &(phy_rmii_mode));
ESPHL_ERROR_CHECK(err, "Read PHY RMSR Register failed");
ESP_LOGV(TAG, "Hardware default RTL8201 RMII Mode Register is: 0x%04" PRIX32, phy_rmii_mode);
ESP_LOGD(TAG, "Writing to PHY Register Address: 0x%02" PRIX32, register_data.address);
ESP_LOGD(TAG, "Writing to PHY Register Value: 0x%04" PRIX32, register_data.value);
err = mac->write_phy_reg(mac, this->phy_addr_, register_data.address, register_data.value);
ESPHL_ERROR_CHECK(err, "Writing PHY Register failed");
err = mac->write_phy_reg(mac, this->phy_addr_, RTL8201_RMSR_REG_ADDR, 0x1FFA);
ESPHL_ERROR_CHECK(err, "Setting Register 16 RMII Mode Setting failed");
err = mac->read_phy_reg(mac, this->phy_addr_, RTL8201_RMSR_REG_ADDR, &(phy_rmii_mode));
ESPHL_ERROR_CHECK(err, "Read PHY RMSR Register failed");
ESP_LOGV(TAG, "Setting RTL8201 RMII Mode Register to: 0x%04" PRIX32, phy_rmii_mode);
err = mac->write_phy_reg(mac, this->phy_addr_, 0x1f, 0x0);
ESPHL_ERROR_CHECK(err, "Setting Page 0 failed");
if (this->type_ == ETHERNET_TYPE_RTL8201 && register_data.page) {
ESP_LOGD(TAG, "Select PHY Register Page 0x%02" PRIX32, 0x0);
err = mac->write_phy_reg(mac, this->phy_addr_, eth_phy_psr_reg_addr, 0x0);
ESPHL_ERROR_CHECK(err, "Select PHY Register Page 0 failed");
}
}
#endif

12
esphome/components/ethernet/ethernet_component.h
View file

@ -35,6 +35,12 @@ struct ManualIP {
network::IPAddress dns2; ///< The second DNS server. 0.0.0.0 for default.
};
struct PHYRegister {
uint32_t address;
uint32_t value;
uint32_t page;
};
enum class EthernetComponentState {
STOPPED,
CONNECTING,
@ -66,6 +72,7 @@ class EthernetComponent : public Component {
void set_mdc_pin(uint8_t mdc_pin);
void set_mdio_pin(uint8_t mdio_pin);
void set_clk_mode(emac_rmii_clock_mode_t clk_mode, emac_rmii_clock_gpio_t clk_gpio);
void add_phy_register(PHYRegister register_value);
#endif
void set_type(EthernetType type);
void set_manual_ip(const ManualIP &manual_ip);
@ -91,8 +98,8 @@ class EthernetComponent : public Component {
void dump_connect_params_();
/// @brief Set `RMII Reference Clock Select` bit for KSZ8081.
void ksz8081_set_clock_reference_(esp_eth_mac_t *mac);
/// @brief Set `RMII Mode Setting Register` for RTL8201.
void rtl8201_set_rmii_mode_(esp_eth_mac_t *mac);
/// @brief Set arbitratry PHY registers from config.
void write_phy_register_(esp_eth_mac_t *mac, PHYRegister register_data);
std::string use_address_;
#ifdef USE_ETHERNET_SPI
@ -111,6 +118,7 @@ class EthernetComponent : public Component {
uint8_t mdio_pin_{18};
emac_rmii_clock_mode_t clk_mode_{EMAC_CLK_EXT_IN};
emac_rmii_clock_gpio_t clk_gpio_{EMAC_CLK_IN_GPIO};
std::vector<PHYRegister> phy_registers_{};
#endif
EthernetType type_{ETHERNET_TYPE_UNKNOWN};
optional<ManualIP> manual_ip_{};

8
esphome/components/ft5x06/touchscreen/__init__.py
View file

@ -1,8 +1,9 @@
from esphome import pins
import esphome.codegen as cg
import esphome.config_validation as cv
from esphome.components import i2c, touchscreen
from esphome.const import CONF_ID
from esphome.const import CONF_ID, CONF_INTERRUPT_PIN
from .. import ft5x06_ns
FT5x06ButtonListener = ft5x06_ns.class_("FT5x06ButtonListener")
@ -16,6 +17,7 @@ FT5x06Touchscreen = ft5x06_ns.class_(
CONFIG_SCHEMA = touchscreen.TOUCHSCREEN_SCHEMA.extend(
{
cv.GenerateID(): cv.declare_id(FT5x06Touchscreen),
cv.Optional(CONF_INTERRUPT_PIN): pins.internal_gpio_input_pin_schema,
}
).extend(i2c.i2c_device_schema(0x48))
@ -24,3 +26,7 @@ async def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
await i2c.register_i2c_device(var, config)
await touchscreen.register_touchscreen(var, config)
if interrupt_pin := config.get(CONF_INTERRUPT_PIN):
pin = await cg.gpio_pin_expression(interrupt_pin)
cg.add(var.set_interrupt_pin(pin))

102
esphome/components/ft5x06/touchscreen/ft5x06_touchscreen.cpp Normal file
View file

@ -0,0 +1,102 @@
#include "ft5x06_touchscreen.h"
#include "esphome/core/log.h"
namespace esphome {
namespace ft5x06 {
static const char *const TAG = "ft5x06.touchscreen";
void FT5x06Touchscreen::setup() {
ESP_LOGCONFIG(TAG, "Setting up FT5x06 Touchscreen...");
if (this->interrupt_pin_ != nullptr) {
this->interrupt_pin_->setup();
this->interrupt_pin_->pin_mode(gpio::FLAG_INPUT | gpio::FLAG_PULLUP);
this->interrupt_pin_->setup();
this->attach_interrupt_(this->interrupt_pin_, gpio::INTERRUPT_FALLING_EDGE);
}
// wait 200ms after reset.
this->set_timeout(200, [this] { this->continue_setup_(); });
}
void FT5x06Touchscreen::continue_setup_() {
uint8_t data[4];
if (!this->set_mode_(FT5X06_OP_MODE))
return;
if (!this->err_check_(this->read_register(FT5X06_VENDOR_ID_REG, data, 1), "Read Vendor ID"))
return;
switch (data[0]) {
case FT5X06_ID_1:
case FT5X06_ID_2:
case FT5X06_ID_3:
this->vendor_id_ = (VendorId) data[0];
ESP_LOGD(TAG, "Read vendor ID 0x%X", data[0]);
break;
default:
ESP_LOGE(TAG, "Unknown vendor ID 0x%X", data[0]);
this->mark_failed();
return;
}
// reading the chip registers to get max x/y does not seem to work.
if (this->display_ != nullptr) {
if (this->x_raw_max_ == this->x_raw_min_) {
this->x_raw_max_ = this->display_->get_native_width();
}
if (this->y_raw_max_ == this->y_raw_min_) {
this->y_raw_max_ = this->display_->get_native_height();
}
}
ESP_LOGCONFIG(TAG, "FT5x06 Touchscreen setup complete");
}
void FT5x06Touchscreen::update_touches() {
uint8_t touch_cnt;
uint8_t data[MAX_TOUCHES][6];
if (!this->read_byte(FT5X06_TD_STATUS, &touch_cnt) || touch_cnt > MAX_TOUCHES) {
ESP_LOGW(TAG, "Failed to read status");
return;
}
if (touch_cnt == 0)
return;
if (!this->read_bytes(FT5X06_TOUCH_DATA, (uint8_t *) data, touch_cnt * 6)) {
ESP_LOGW(TAG, "Failed to read touch data");
return;
}
for (uint8_t i = 0; i != touch_cnt; i++) {
uint8_t status = data[i][0] >> 6;
uint8_t id = data[i][2] >> 3;
uint16_t x = encode_uint16(data[i][0] & 0x0F, data[i][1]);
uint16_t y = encode_uint16(data[i][2] & 0xF, data[i][3]);
ESP_LOGD(TAG, "Read %X status, id: %d, pos %d/%d", status, id, x, y);
if (status == 0 || status == 2) {
this->add_raw_touch_position_(id, x, y);
}
}
}
void FT5x06Touchscreen::dump_config() {
ESP_LOGCONFIG(TAG, "FT5x06 Touchscreen:");
ESP_LOGCONFIG(TAG, " Address: 0x%02X", this->address_);
ESP_LOGCONFIG(TAG, " Vendor ID: 0x%X", (int) this->vendor_id_);
}
bool FT5x06Touchscreen::err_check_(i2c::ErrorCode err, const char *msg) {
if (err != i2c::ERROR_OK) {
this->mark_failed();
ESP_LOGE(TAG, "%s failed - err 0x%X", msg, err);
return false;
}
return true;
}
bool FT5x06Touchscreen::set_mode_(FTMode mode) {
return this->err_check_(this->write_register(FT5X06_MODE_REG, (uint8_t *) &mode, 1), "Set mode");
}
} // namespace ft5x06
} // namespace esphome

94
esphome/components/ft5x06/touchscreen/ft5x06_touchscreen.h
View file

@ -3,14 +3,12 @@
#include "esphome/components/i2c/i2c.h"
#include "esphome/components/touchscreen/touchscreen.h"
#include "esphome/core/component.h"
#include "esphome/core/gpio.h"
#include "esphome/core/hal.h"
#include "esphome/core/log.h"
namespace esphome {
namespace ft5x06 {
static const char *const TAG = "ft5x06.touchscreen";
enum VendorId {
FT5X06_ID_UNKNOWN = 0,
FT5X06_ID_1 = 0x51,
@ -39,91 +37,19 @@ static const size_t MAX_TOUCHES = 5; // max number of possible touches reported
class FT5x06Touchscreen : public touchscreen::Touchscreen, public i2c::I2CDevice {
public:
void setup() override {
esph_log_config(TAG, "Setting up FT5x06 Touchscreen...");
// wait 200ms after reset.
this->set_timeout(200, [this] { this->continue_setup_(); });
}
void setup() override;
void dump_config() override;
void update_touches() override;
void continue_setup_(void) {
uint8_t data[4];
if (!this->set_mode_(FT5X06_OP_MODE))
return;
if (!this->err_check_(this->read_register(FT5X06_VENDOR_ID_REG, data, 1), "Read Vendor ID"))
return;
switch (data[0]) {
case FT5X06_ID_1:
case FT5X06_ID_2:
case FT5X06_ID_3:
this->vendor_id_ = (VendorId) data[0];
esph_log_d(TAG, "Read vendor ID 0x%X", data[0]);
break;
default:
esph_log_e(TAG, "Unknown vendor ID 0x%X", data[0]);
this->mark_failed();
return;
}
// reading the chip registers to get max x/y does not seem to work.
if (this->display_ != nullptr) {
if (this->x_raw_max_ == this->x_raw_min_) {
this->x_raw_max_ = this->display_->get_native_width();
}
if (this->y_raw_max_ == this->y_raw_min_) {
this->y_raw_max_ = this->display_->get_native_height();
}
}
esph_log_config(TAG, "FT5x06 Touchscreen setup complete");
}
void update_touches() override {
uint8_t touch_cnt;
uint8_t data[MAX_TOUCHES][6];
if (!this->read_byte(FT5X06_TD_STATUS, &touch_cnt) || touch_cnt > MAX_TOUCHES) {
esph_log_w(TAG, "Failed to read status");
return;
}
if (touch_cnt == 0)
return;
if (!this->read_bytes(FT5X06_TOUCH_DATA, (uint8_t *) data, touch_cnt * 6)) {
esph_log_w(TAG, "Failed to read touch data");
return;
}
for (uint8_t i = 0; i != touch_cnt; i++) {
uint8_t status = data[i][0] >> 6;
uint8_t id = data[i][2] >> 3;
uint16_t x = encode_uint16(data[i][0] & 0x0F, data[i][1]);
uint16_t y = encode_uint16(data[i][2] & 0xF, data[i][3]);
esph_log_d(TAG, "Read %X status, id: %d, pos %d/%d", status, id, x, y);
if (status == 0 || status == 2) {
this->add_raw_touch_position_(id, x, y);
}
}
}
void dump_config() override {
esph_log_config(TAG, "FT5x06 Touchscreen:");
esph_log_config(TAG, " Address: 0x%02X", this->address_);
esph_log_config(TAG, " Vendor ID: 0x%X", (int) this->vendor_id_);
}
void set_interrupt_pin(InternalGPIOPin *interrupt_pin) { this->interrupt_pin_ = interrupt_pin; }
protected:
bool err_check_(i2c::ErrorCode err, const char *msg) {
if (err != i2c::ERROR_OK) {
this->mark_failed();
esph_log_e(TAG, "%s failed - err 0x%X", msg, err);
return false;
}
return true;
}
bool set_mode_(FTMode mode) {
return this->err_check_(this->write_register(FT5X06_MODE_REG, (uint8_t *) &mode, 1), "Set mode");
}
void continue_setup_();
bool err_check_(i2c::ErrorCode err, const char *msg);
bool set_mode_(FTMode mode);
VendorId vendor_id_{FT5X06_ID_UNKNOWN};
InternalGPIOPin *interrupt_pin_{nullptr};
};
} // namespace ft5x06

14
esphome/components/remote_base/__init__.py
View file

@ -1769,7 +1769,17 @@ def aeha_dumper(var, config):
pass
@register_action("aeha", AEHAAction, AEHA_SCHEMA)
@register_action(
"aeha",
AEHAAction,
AEHA_SCHEMA.extend(
{
cv.Optional(CONF_CARRIER_FREQUENCY, default="38000Hz"): cv.All(
cv.frequency, cv.int_
),
}
),
)
async def aeha_action(var, config, args):
template_ = await cg.templatable(config[CONF_ADDRESS], args, cg.uint16)
cg.add(var.set_address(template_))
@ -1777,6 +1787,8 @@ async def aeha_action(var, config, args):
config[CONF_DATA], args, cg.std_vector.template(cg.uint8)
)
cg.add(var.set_data(template_))
templ = await cg.templatable(config[CONF_CARRIER_FREQUENCY], args, cg.uint32)
cg.add(var.set_carrier_frequency(templ))
# Haier

1
esphome/components/remote_base/aeha_protocol.cpp
View file

@ -16,7 +16,6 @@ static const uint16_t BIT_ZERO_LOW_US = BITWISE;
static const uint16_t TRAILER = BITWISE;
void AEHAProtocol::encode(RemoteTransmitData *dst, const AEHAData &data) {
dst->set_carrier_frequency(38000);
dst->reserve(2 + 32 + (data.data.size() * 2) + 1);
dst->item(HEADER_HIGH_US, HEADER_LOW_US);

2
esphome/components/remote_base/aeha_protocol.h
View file

@ -30,12 +30,14 @@ template<typename... Ts> class AEHAAction : public RemoteTransmitterActionBase<T
public:
TEMPLATABLE_VALUE(uint16_t, address)
TEMPLATABLE_VALUE(std::vector<uint8_t>, data)
TEMPLATABLE_VALUE(uint32_t, carrier_frequency);
void set_data(const std::vector<uint8_t> &data) { data_ = data; }
void encode(RemoteTransmitData *dst, Ts... x) override {
AEHAData data{};
data.address = this->address_.value(x...);
data.data = this->data_.value(x...);
dst->set_carrier_frequency(this->carrier_frequency_.value(x...));
AEHAProtocol().encode(dst, data);
}
};

15
esphome/components/tuya/climate/__init__.py
View file

@ -189,8 +189,6 @@ CONFIG_SCHEMA = cv.All(
cv.has_at_least_one_key(CONF_TARGET_TEMPERATURE_DATAPOINT, CONF_SWITCH_DATAPOINT),
validate_temperature_multipliers,
validate_cooling_values,
cv.has_at_most_one_key(CONF_ACTIVE_STATE, CONF_HEATING_STATE_PIN),
cv.has_at_most_one_key(CONF_ACTIVE_STATE, CONF_COOLING_STATE_PIN),
)
@ -207,6 +205,12 @@ async def to_code(config):
if switch_datapoint := config.get(CONF_SWITCH_DATAPOINT):
cg.add(var.set_switch_id(switch_datapoint))
if heating_state_pin_config := config.get(CONF_HEATING_STATE_PIN):
heating_state_pin = await cg.gpio_pin_expression(heating_state_pin_config)
cg.add(var.set_heating_state_pin(heating_state_pin))
if cooling_state_pin_config := config.get(CONF_COOLING_STATE_PIN):
cooling_state_pin = await cg.gpio_pin_expression(cooling_state_pin_config)
cg.add(var.set_cooling_state_pin(cooling_state_pin))
if active_state_config := config.get(CONF_ACTIVE_STATE):
cg.add(var.set_active_state_id(active_state_config.get(CONF_DATAPOINT)))
if (heating_value := active_state_config.get(CONF_HEATING_VALUE)) is not None:
@ -217,13 +221,6 @@ async def to_code(config):
cg.add(var.set_active_state_drying_value(drying_value))
if (fanonly_value := active_state_config.get(CONF_FANONLY_VALUE)) is not None:
cg.add(var.set_active_state_fanonly_value(fanonly_value))
else:
if heating_state_pin_config := config.get(CONF_HEATING_STATE_PIN):
heating_state_pin = await cg.gpio_pin_expression(heating_state_pin_config)
cg.add(var.set_heating_state_pin(heating_state_pin))
if cooling_state_pin_config := config.get(CONF_COOLING_STATE_PIN):
cooling_state_pin = await cg.gpio_pin_expression(cooling_state_pin_config)
cg.add(var.set_cooling_state_pin(cooling_state_pin))
if target_temperature_datapoint := config.get(CONF_TARGET_TEMPERATURE_DATAPOINT):
cg.add(var.set_target_temperature_id(target_temperature_datapoint))

76
esphome/components/tuya/climate/tuya_climate.cpp
View file

@ -24,6 +24,14 @@ void TuyaClimate::setup() {
this->publish_state();
});
}
if (this->heating_state_pin_ != nullptr) {
this->heating_state_pin_->setup();
this->heating_state_ = this->heating_state_pin_->digital_read();
}
if (this->cooling_state_pin_ != nullptr) {
this->cooling_state_pin_->setup();
this->cooling_state_ = this->cooling_state_pin_->digital_read();
}
if (this->active_state_id_.has_value()) {
this->parent_->register_listener(*this->active_state_id_, [this](const TuyaDatapoint &datapoint) {
ESP_LOGV(TAG, "MCU reported active state is: %u", datapoint.value_enum);
@ -31,15 +39,6 @@ void TuyaClimate::setup() {
this->compute_state_();
this->publish_state();
});
} else {
if (this->heating_state_pin_ != nullptr) {
this->heating_state_pin_->setup();
this->heating_state_ = this->heating_state_pin_->digital_read();
}
if (this->cooling_state_pin_ != nullptr) {
this->cooling_state_pin_->setup();
this->cooling_state_ = this->cooling_state_pin_->digital_read();
}
}
if (this->target_temperature_id_.has_value()) {
this->parent_->register_listener(*this->target_temperature_id_, [this](const TuyaDatapoint &datapoint) {
@ -113,9 +112,6 @@ void TuyaClimate::setup() {
}
void TuyaClimate::loop() {
if (this->active_state_id_.has_value())
return;
bool state_changed = false;
if (this->heating_state_pin_ != nullptr) {
bool heating_state = this->heating_state_pin_->digital_read();
@ -147,14 +143,18 @@ void TuyaClimate::control(const climate::ClimateCall &call) {
this->parent_->set_boolean_datapoint_value(*this->switch_id_, switch_state);
const climate::ClimateMode new_mode = *call.get_mode();
if (new_mode == climate::CLIMATE_MODE_HEAT && this->supports_heat_) {
this->parent_->set_enum_datapoint_value(*this->active_state_id_, *this->active_state_heating_value_);
} else if (new_mode == climate::CLIMATE_MODE_COOL && this->supports_cool_) {
this->parent_->set_enum_datapoint_value(*this->active_state_id_, *this->active_state_cooling_value_);
} else if (new_mode == climate::CLIMATE_MODE_DRY && this->active_state_drying_value_.has_value()) {
this->parent_->set_enum_datapoint_value(*this->active_state_id_, *this->active_state_drying_value_);
} else if (new_mode == climate::CLIMATE_MODE_FAN_ONLY && this->active_state_fanonly_value_.has_value()) {
this->parent_->set_enum_datapoint_value(*this->active_state_id_, *this->active_state_fanonly_value_);
if (this->active_state_id_.has_value()) {
if (new_mode == climate::CLIMATE_MODE_HEAT && this->supports_heat_) {
this->parent_->set_enum_datapoint_value(*this->active_state_id_, *this->active_state_heating_value_);
} else if (new_mode == climate::CLIMATE_MODE_COOL && this->supports_cool_) {
this->parent_->set_enum_datapoint_value(*this->active_state_id_, *this->active_state_cooling_value_);
} else if (new_mode == climate::CLIMATE_MODE_DRY && this->active_state_drying_value_.has_value()) {
this->parent_->set_enum_datapoint_value(*this->active_state_id_, *this->active_state_drying_value_);
} else if (new_mode == climate::CLIMATE_MODE_FAN_ONLY && this->active_state_fanonly_value_.has_value()) {
this->parent_->set_enum_datapoint_value(*this->active_state_id_, *this->active_state_fanonly_value_);
}
} else {
ESP_LOGW(TAG, "Active state (mode) datapoint not configured");
}
}
@ -422,7 +422,32 @@ void TuyaClimate::compute_state_() {
}
climate::ClimateAction target_action = climate::CLIMATE_ACTION_IDLE;
if (this->active_state_id_.has_value()) {
if (this->heating_state_pin_ != nullptr || this->cooling_state_pin_ != nullptr) {
// Use state from input pins
if (this->heating_state_) {
target_action = climate::CLIMATE_ACTION_HEATING;
this->mode = climate::CLIMATE_MODE_HEAT;
} else if (this->cooling_state_) {
target_action = climate::CLIMATE_ACTION_COOLING;
this->mode = climate::CLIMATE_MODE_COOL;
}
if (this->active_state_id_.has_value()) {
// Both are available, use MCU datapoint as mode
if (this->supports_heat_ && this->active_state_heating_value_.has_value() &&
this->active_state_ == this->active_state_heating_value_) {
this->mode = climate::CLIMATE_MODE_HEAT;
} else if (this->supports_cool_ && this->active_state_cooling_value_.has_value() &&
this->active_state_ == this->active_state_cooling_value_) {
this->mode = climate::CLIMATE_MODE_COOL;
} else if (this->active_state_drying_value_.has_value() &&
this->active_state_ == this->active_state_drying_value_) {
this->mode = climate::CLIMATE_MODE_DRY;
} else if (this->active_state_fanonly_value_.has_value() &&
this->active_state_ == this->active_state_fanonly_value_) {
this->mode = climate::CLIMATE_MODE_FAN_ONLY;
}
}
} else if (this->active_state_id_.has_value()) {
// Use state from MCU datapoint
if (this->supports_heat_ && this->active_state_heating_value_.has_value() &&
this->active_state_ == this->active_state_heating_value_) {
@ -441,15 +466,6 @@ void TuyaClimate::compute_state_() {
target_action = climate::CLIMATE_ACTION_FAN;
this->mode = climate::CLIMATE_MODE_FAN_ONLY;
}
} else if (this->heating_state_pin_ != nullptr || this->cooling_state_pin_ != nullptr) {
// Use state from input pins
if (this->heating_state_) {
target_action = climate::CLIMATE_ACTION_HEATING;
this->mode = climate::CLIMATE_MODE_HEAT;
} else if (this->cooling_state_) {
target_action = climate::CLIMATE_ACTION_COOLING;
this->mode = climate::CLIMATE_MODE_COOL;
}
} else {
// Fallback to active state calc based on temp and hysteresis
const float temp_diff = this->target_temperature - this->current_temperature;

3
esphome/components/tuya/cover/__init__.py
View file

@ -16,6 +16,7 @@ CONF_DIRECTION_DATAPOINT = "direction_datapoint"
CONF_POSITION_DATAPOINT = "position_datapoint"
CONF_POSITION_REPORT_DATAPOINT = "position_report_datapoint"
CONF_INVERT_POSITION = "invert_position"
CONF_INVERT_POSITION_REPORT = "invert_position_report"
TuyaCover = tuya_ns.class_("TuyaCover", cover.Cover, cg.Component)
@ -47,6 +48,7 @@ CONFIG_SCHEMA = cv.All(
cv.Optional(CONF_MIN_VALUE, default=0): cv.int_,
cv.Optional(CONF_MAX_VALUE, default=100): cv.int_,
cv.Optional(CONF_INVERT_POSITION, default=False): cv.boolean,
cv.Optional(CONF_INVERT_POSITION_REPORT, default=False): cv.boolean,
cv.Optional(CONF_RESTORE_MODE, default="RESTORE"): cv.enum(
RESTORE_MODES, upper=True
),
@ -71,6 +73,7 @@ async def to_code(config):
cg.add(var.set_min_value(config[CONF_MIN_VALUE]))
cg.add(var.set_max_value(config[CONF_MAX_VALUE]))
cg.add(var.set_invert_position(config[CONF_INVERT_POSITION]))
cg.add(var.set_invert_position_report(config[CONF_INVERT_POSITION_REPORT]))
cg.add(var.set_restore_mode(config[CONF_RESTORE_MODE]))
paren = await cg.get_variable(config[CONF_TUYA_ID])
cg.add(var.set_tuya_parent(paren))

9
esphome/components/tuya/cover/tuya_cover.cpp
View file

@ -51,7 +51,7 @@ void TuyaCover::setup() {
return;
}
auto pos = float(datapoint.value_uint - this->min_value_) / this->value_range_;
this->position = 1.0f - pos;
this->position = this->invert_position_report_ ? pos : 1.0f - pos;
this->publish_state();
});
}
@ -62,7 +62,7 @@ void TuyaCover::control(const cover::CoverCall &call) {
this->parent_->force_set_enum_datapoint_value(*this->control_id_, COMMAND_STOP);
} else {
auto pos = this->position;
pos = 1.0f - pos;
pos = this->invert_position_report_ ? pos : 1.0f - pos;
auto position_int = static_cast<uint32_t>(pos * this->value_range_);
position_int = position_int + this->min_value_;
@ -78,7 +78,7 @@ void TuyaCover::control(const cover::CoverCall &call) {
this->parent_->force_set_enum_datapoint_value(*this->control_id_, COMMAND_CLOSE);
}
} else {
pos = 1.0f - pos;
pos = this->invert_position_report_ ? pos : 1.0f - pos;
auto position_int = static_cast<uint32_t>(pos * this->value_range_);
position_int = position_int + this->min_value_;
@ -112,6 +112,9 @@ void TuyaCover::dump_config() {
ESP_LOGCONFIG(TAG, " Configured as Inverted, but direction_datapoint isn't configured");
}
}
if (this->invert_position_report_) {
ESP_LOGCONFIG(TAG, " Position Reporting Inverted");
}
if (this->control_id_.has_value()) {
ESP_LOGCONFIG(TAG, " Control has datapoint ID %u", *this->control_id_);
}

2
esphome/components/tuya/cover/tuya_cover.h
View file

@ -25,6 +25,7 @@ class TuyaCover : public cover::Cover, public Component {
void set_min_value(uint32_t min_value) { min_value_ = min_value; }
void set_max_value(uint32_t max_value) { max_value_ = max_value; }
void set_invert_position(bool invert_position) { invert_position_ = invert_position; }
void set_invert_position_report(bool invert_position_report) { invert_position_report_ = invert_position_report; }
void set_restore_mode(TuyaCoverRestoreMode restore_mode) { restore_mode_ = restore_mode; }
protected:
@ -42,6 +43,7 @@ class TuyaCover : public cover::Cover, public Component {
uint32_t max_value_;
uint32_t value_range_;
bool invert_position_;
bool invert_position_report_;
};
} // namespace tuya

1
tests/components/remote_transmitter/common-buttons.yaml
View file

@ -118,6 +118,7 @@ button:
on_press:
remote_transmitter.transmit_aeha:
address: 0x8008
carrier_frequency: 36700Hz
data:
[
0x00,

1
tests/test1.yaml
View file

@ -2906,6 +2906,7 @@ switch:
turn_on_action:
remote_transmitter.transmit_aeha:
address: 0x8008
carrier_frequency: 36700Hz
data:
[
0x00,