Merge pull request #6518 from esphome/bump-2024.4.0b2

2024.4.0b2

esphome/components/ads1115/__init__.py

@@ -4,13 +4,14 @@ from esphome.components import i2c
 from esphome.const import CONF_ID
 
 DEPENDENCIES = ["i2c"]
-AUTO_LOAD = ["sensor", "voltage_sampler"]
 MULTI_CONF = True
 
 ads1115_ns = cg.esphome_ns.namespace("ads1115")
 ADS1115Component = ads1115_ns.class_("ADS1115Component", cg.Component, i2c.I2CDevice)
 
 CONF_CONTINUOUS_MODE = "continuous_mode"
+CONF_ADS1115_ID = "ads1115_id"
+
 CONFIG_SCHEMA = (
     cv.Schema(
         {

esphome/components/ads1115/ads1115.cpp

@@ -1,6 +1,6 @@
 #include "ads1115.h"
-#include "esphome/core/log.h"
 #include "esphome/core/hal.h"
+#include "esphome/core/log.h"
 
 namespace esphome {
 namespace ads1115 {
@@ -75,25 +75,19 @@ void ADS1115Component::dump_config() {
   if (this->is_failed()) {
     ESP_LOGE(TAG, "Communication with ADS1115 failed!");
   }
-
-  for (auto *sensor : this->sensors_) {
-    LOG_SENSOR("  ", "Sensor", sensor);
-    ESP_LOGCONFIG(TAG, "    Multiplexer: %u", sensor->get_multiplexer());
-    ESP_LOGCONFIG(TAG, "    Gain: %u", sensor->get_gain());
-    ESP_LOGCONFIG(TAG, "    Resolution: %u", sensor->get_resolution());
-  }
 }
-float ADS1115Component::request_measurement(ADS1115Sensor *sensor) {
+float ADS1115Component::request_measurement(ADS1115Multiplexer multiplexer, ADS1115Gain gain,
+                                            ADS1115Resolution resolution) {
   uint16_t config = this->prev_config_;
   // Multiplexer
   //        0bxBBBxxxxxxxxxxxx
   config &= 0b1000111111111111;
-  config |= (sensor->get_multiplexer() & 0b111) << 12;
+  config |= (multiplexer & 0b111) << 12;
 
   // Gain
   //        0bxxxxBBBxxxxxxxxx
   config &= 0b1111000111111111;
-  config |= (sensor->get_gain() & 0b111) << 9;
+  config |= (gain & 0b111) << 9;
 
   if (!this->continuous_mode_) {
     // Start conversion
@@ -132,7 +126,7 @@ float ADS1115Component::request_measurement(ADS1115Sensor *sensor) {
     return NAN;
   }
 
-  if (sensor->get_resolution() == ADS1015_12_BITS) {
+  if (resolution == ADS1015_12_BITS) {
     bool negative = (raw_conversion >> 15) == 1;
 
     // shift raw_conversion as it's only 12-bits, left justified
@@ -151,8 +145,8 @@ float ADS1115Component::request_measurement(ADS1115Sensor *sensor) {
   auto signed_conversion = static_cast<int16_t>(raw_conversion);
 
   float millivolts;
-  float divider = (sensor->get_resolution() == ADS1115_16_BITS) ? 32768.0f : 2048.0f;
-  switch (sensor->get_gain()) {
+  float divider = (resolution == ADS1115_16_BITS) ? 32768.0f : 2048.0f;
+  switch (gain) {
     case ADS1115_GAIN_6P144:
       millivolts = (signed_conversion * 6144) / divider;
       break;
@@ -179,14 +173,5 @@ float ADS1115Component::request_measurement(ADS1115Sensor *sensor) {
   return millivolts / 1e3f;
 }
 
-float ADS1115Sensor::sample() { return this->parent_->request_measurement(this); }
-void ADS1115Sensor::update() {
-  float v = this->parent_->request_measurement(this);
-  if (!std::isnan(v)) {
-    ESP_LOGD(TAG, "'%s': Got Voltage=%fV", this->get_name().c_str(), v);
-    this->publish_state(v);
-  }
-}
-
 }  // namespace ads1115
 }  // namespace esphome

esphome/components/ads1115/ads1115.h

@@ -1,9 +1,7 @@
 #pragma once
 
-#include "esphome/core/component.h"
-#include "esphome/components/sensor/sensor.h"
 #include "esphome/components/i2c/i2c.h"
-#include "esphome/components/voltage_sampler/voltage_sampler.h"
+#include "esphome/core/component.h"
 
 #include <vector>
 
@@ -35,12 +33,8 @@ enum ADS1115Resolution {
   ADS1015_12_BITS = 12,
 };
 
-class ADS1115Sensor;
-
 class ADS1115Component : public Component, public i2c::I2CDevice {
  public:
-  void register_sensor(ADS1115Sensor *obj) { this->sensors_.push_back(obj); }
-  /// Set up the internal sensor array.
   void setup() override;
   void dump_config() override;
   /// HARDWARE_LATE setup priority
@@ -48,33 +42,12 @@ class ADS1115Component : public Component, public i2c::I2CDevice {
   void set_continuous_mode(bool continuous_mode) { continuous_mode_ = continuous_mode; }
 
   /// Helper method to request a measurement from a sensor.
-  float request_measurement(ADS1115Sensor *sensor);
+  float request_measurement(ADS1115Multiplexer multiplexer, ADS1115Gain gain, ADS1115Resolution resolution);
 
  protected:
-  std::vector<ADS1115Sensor *> sensors_;
   uint16_t prev_config_{0};
   bool continuous_mode_;
 };
 
-/// Internal holder class that is in instance of Sensor so that the hub can create individual sensors.
-class ADS1115Sensor : public sensor::Sensor, public PollingComponent, public voltage_sampler::VoltageSampler {
- public:
-  ADS1115Sensor(ADS1115Component *parent) : parent_(parent) {}
-  void update() override;
-  void set_multiplexer(ADS1115Multiplexer multiplexer) { multiplexer_ = multiplexer; }
-  void set_gain(ADS1115Gain gain) { gain_ = gain; }
-  void set_resolution(ADS1115Resolution resolution) { resolution_ = resolution; }
-  float sample() override;
-  uint8_t get_multiplexer() const { return multiplexer_; }
-  uint8_t get_gain() const { return gain_; }
-  uint8_t get_resolution() const { return resolution_; }
-
- protected:
-  ADS1115Component *parent_;
-  ADS1115Multiplexer multiplexer_;
-  ADS1115Gain gain_;
-  ADS1115Resolution resolution_;
-};
-
 }  // namespace ads1115
 }  // namespace esphome

esphome/components/ads1115/sensor/__init__.py

@@ -10,8 +10,9 @@ from esphome.const import (
     UNIT_VOLT,
     CONF_ID,
 )
-from . import ads1115_ns, ADS1115Component
+from .. import ads1115_ns, ADS1115Component, CONF_ADS1115_ID
 
+AUTO_LOAD = ["voltage_sampler"]
 DEPENDENCIES = ["ads1115"]
 
 ADS1115Multiplexer = ads1115_ns.enum("ADS1115Multiplexer")
@@ -43,20 +44,10 @@ RESOLUTION = {
 }
 
 
-def validate_gain(value):
-    if isinstance(value, float):
-        value = f"{value:0.03f}"
-    elif not isinstance(value, str):
-        raise cv.Invalid(f'invalid gain "{value}"')
-
-    return cv.enum(GAIN)(value)
-
-
 ADS1115Sensor = ads1115_ns.class_(
     "ADS1115Sensor", sensor.Sensor, cg.PollingComponent, voltage_sampler.VoltageSampler
 )
 
-CONF_ADS1115_ID = "ads1115_id"
 CONFIG_SCHEMA = (
     sensor.sensor_schema(
         ADS1115Sensor,
@@ -69,7 +60,7 @@ CONFIG_SCHEMA = (
         {
             cv.GenerateID(CONF_ADS1115_ID): cv.use_id(ADS1115Component),
             cv.Required(CONF_MULTIPLEXER): cv.enum(MUX, upper=True, space="_"),
-            cv.Required(CONF_GAIN): validate_gain,
+            cv.Required(CONF_GAIN): cv.enum(GAIN, string=True),
             cv.Optional(CONF_RESOLUTION, default="16_BITS"): cv.enum(
                 RESOLUTION, upper=True, space="_"
             ),
@@ -80,13 +71,11 @@ CONFIG_SCHEMA = (
 
 
 async def to_code(config):
-    paren = await cg.get_variable(config[CONF_ADS1115_ID])
-    var = cg.new_Pvariable(config[CONF_ID], paren)
+    var = cg.new_Pvariable(config[CONF_ID])
     await sensor.register_sensor(var, config)
     await cg.register_component(var, config)
+    await cg.register_parented(var, config[CONF_ADS1115_ID])
 
     cg.add(var.set_multiplexer(config[CONF_MULTIPLEXER]))
     cg.add(var.set_gain(config[CONF_GAIN]))
     cg.add(var.set_resolution(config[CONF_RESOLUTION]))
-
-    cg.add(paren.register_sensor(var))

esphome/components/ads1115/sensor/ads1115_sensor.cpp

@@ -0,0 +1,30 @@
+#include "ads1115_sensor.h"
+
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace ads1115 {
+
+static const char *const TAG = "ads1115.sensor";
+
+float ADS1115Sensor::sample() {
+  return this->parent_->request_measurement(this->multiplexer_, this->gain_, this->resolution_);
+}
+
+void ADS1115Sensor::update() {
+  float v = this->sample();
+  if (!std::isnan(v)) {
+    ESP_LOGD(TAG, "'%s': Got Voltage=%fV", this->get_name().c_str(), v);
+    this->publish_state(v);
+  }
+}
+
+void ADS1115Sensor::dump_config() {
+  LOG_SENSOR("  ", "ADS1115 Sensor", this);
+  ESP_LOGCONFIG(TAG, "    Multiplexer: %u", this->multiplexer_);
+  ESP_LOGCONFIG(TAG, "    Gain: %u", this->gain_);
+  ESP_LOGCONFIG(TAG, "    Resolution: %u", this->resolution_);
+}
+
+}  // namespace ads1115
+}  // namespace esphome

esphome/components/ads1115/sensor/ads1115_sensor.h

@@ -0,0 +1,35 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/core/helpers.h"
+
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/components/voltage_sampler/voltage_sampler.h"
+
+#include "../ads1115.h"
+
+namespace esphome {
+namespace ads1115 {
+
+/// Internal holder class that is in instance of Sensor so that the hub can create individual sensors.
+class ADS1115Sensor : public sensor::Sensor,
+                      public PollingComponent,
+                      public voltage_sampler::VoltageSampler,
+                      public Parented<ADS1115Component> {
+ public:
+  void update() override;
+  void set_multiplexer(ADS1115Multiplexer multiplexer) { this->multiplexer_ = multiplexer; }
+  void set_gain(ADS1115Gain gain) { this->gain_ = gain; }
+  void set_resolution(ADS1115Resolution resolution) { this->resolution_ = resolution; }
+  float sample() override;
+
+  void dump_config() override;
+
+ protected:
+  ADS1115Multiplexer multiplexer_;
+  ADS1115Gain gain_;
+  ADS1115Resolution resolution_;
+};
+
+}  // namespace ads1115
+}  // namespace esphome

esphome/const.py

@@ -1,6 +1,6 @@
 """Constants used by esphome."""
 
-__version__ = "2024.4.0b1"
+__version__ = "2024.4.0b2"
 
 ALLOWED_NAME_CHARS = "abcdefghijklmnopqrstuvwxyz0123456789-_"
 VALID_SUBSTITUTIONS_CHARACTERS = (

requirements.txt

@@ -12,7 +12,7 @@ pyserial==3.5
 platformio==6.1.13  # When updating platformio, also update Dockerfile
 esptool==4.7.0
 click==8.1.7
-esphome-dashboard==20240319.0
+esphome-dashboard==20240412.0
 aioesphomeapi==23.2.0
 zeroconf==0.131.0
 python-magic==0.4.27

tests/components/remote_transmitter/common-buttons.yaml

@@ -176,3 +176,11 @@ button:
             0x00,
             0x05,
           ]
+  - platform: template
+    name: Dooya
+    on_press:
+      remote_transmitter.transmit_dooya:
+        id: 0x123456
+        channel: 1
+        button: 1
+        check: 1