Merge branch 'dev' into as7343

.github/actions/build-image/action.yaml

@@ -34,6 +34,16 @@ runs:
           echo $l >> $GITHUB_OUTPUT
         done
 
+    # set cache-to only if dev branch
+    - id: cache-to
+      shell: bash
+      run: |-
+        if [[ "${{ github.ref }}" == "refs/heads/dev" ]]; then
+          echo "value=type=gha,mode=max" >> $GITHUB_OUTPUT
+        else
+          echo "value=" >> $GITHUB_OUTPUT
+        fi
+
     - name: Build and push to ghcr by digest
       id: build-ghcr
       uses: docker/build-push-action@v5.3.0
@@ -43,7 +53,7 @@ runs:
         platforms: ${{ inputs.platform }}
         target: ${{ inputs.target }}
         cache-from: type=gha
-        cache-to: type=gha,mode=max
+        cache-to: ${{ steps.cache-to.outputs.value }}
         build-args: |
           BASEIMGTYPE=${{ inputs.baseimg }}
           BUILD_VERSION=${{ inputs.version }}
@@ -57,14 +67,6 @@ runs:
         digest="${{ steps.build-ghcr.outputs.digest }}"
         touch "/tmp/digests/${{ inputs.target }}/ghcr/${digest#sha256:}"
 
-    - name: Upload ghcr digest
-      uses: actions/upload-artifact@v3.1.3
-      with:
-        name: digests-${{ inputs.target }}-ghcr
-        path: /tmp/digests/${{ inputs.target }}/ghcr/*
-        if-no-files-found: error
-        retention-days: 1
-
     - name: Build and push to dockerhub by digest
       id: build-dockerhub
       uses: docker/build-push-action@v5.3.0
@@ -74,7 +76,7 @@ runs:
         platforms: ${{ inputs.platform }}
         target: ${{ inputs.target }}
         cache-from: type=gha
-        cache-to: type=gha,mode=max
+        cache-to: ${{ steps.cache-to.outputs.value }}
         build-args: |
           BASEIMGTYPE=${{ inputs.baseimg }}
           BUILD_VERSION=${{ inputs.version }}
@@ -87,11 +89,3 @@ runs:
         mkdir -p /tmp/digests/${{ inputs.target }}/dockerhub
         digest="${{ steps.build-dockerhub.outputs.digest }}"
         touch "/tmp/digests/${{ inputs.target }}/dockerhub/${digest#sha256:}"
-
-    - name: Upload dockerhub digest
-      uses: actions/upload-artifact@v3.1.3
-      with:
-        name: digests-${{ inputs.target }}-dockerhub
-        path: /tmp/digests/${{ inputs.target }}/dockerhub/*
-        if-no-files-found: error
-        retention-days: 1

.github/workflows/ci-api-proto.yml

@@ -21,7 +21,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout
-        uses: actions/checkout@v4.1.1
+        uses: actions/checkout@v4.1.5
       - name: Set up Python
         uses: actions/setup-python@v5.1.0
         with:

.github/workflows/ci-docker.yml

@@ -40,7 +40,7 @@ jobs:
         arch: [amd64, armv7, aarch64]
         build_type: ["ha-addon", "docker", "lint"]
     steps:
-      - uses: actions/checkout@v4.1.1
+      - uses: actions/checkout@v4.1.5
       - name: Set up Python
         uses: actions/setup-python@v5.1.0
         with:

.github/workflows/ci.yml

@@ -34,7 +34,7 @@ jobs:
       cache-key: ${{ steps.cache-key.outputs.key }}
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.1
+        uses: actions/checkout@v4.1.5
       - name: Generate cache-key
         id: cache-key
         run: echo key="${{ hashFiles('requirements.txt', 'requirements_optional.txt', 'requirements_test.txt') }}" >> $GITHUB_OUTPUT
@@ -66,7 +66,7 @@ jobs:
       - common
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.1
+        uses: actions/checkout@v4.1.5
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -87,7 +87,7 @@ jobs:
       - common
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.1
+        uses: actions/checkout@v4.1.5
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -108,7 +108,7 @@ jobs:
       - common
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.1
+        uses: actions/checkout@v4.1.5
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -129,7 +129,7 @@ jobs:
       - common
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.1
+        uses: actions/checkout@v4.1.5
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -150,7 +150,7 @@ jobs:
       - common
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.1
+        uses: actions/checkout@v4.1.5
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -199,7 +199,7 @@ jobs:
       - common
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.1
+        uses: actions/checkout@v4.1.5
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -229,7 +229,7 @@ jobs:
       - common
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.1
+        uses: actions/checkout@v4.1.5
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -254,7 +254,7 @@ jobs:
       matrix: ${{ steps.set-matrix.outputs.matrix }}
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.1
+        uses: actions/checkout@v4.1.5
       - name: Find all YAML test files
         id: set-matrix
         run: echo "matrix=$(ls tests/test*.yaml | jq -R -s -c 'split("\n")[:-1]')" >> $GITHUB_OUTPUT
@@ -271,7 +271,7 @@ jobs:
         file: ${{ fromJson(needs.compile-tests-list.outputs.matrix) }}
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.1
+        uses: actions/checkout@v4.1.5
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -303,7 +303,7 @@ jobs:
         file: ${{ fromJson(needs.compile-tests-list.outputs.matrix) }}
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.1
+        uses: actions/checkout@v4.1.5
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -358,18 +358,26 @@ jobs:
 
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.1
+        uses: actions/checkout@v4.1.5
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
           cache-key: ${{ needs.common.outputs.cache-key }}
+
       - name: Cache platformio
+        if: github.ref == 'refs/heads/dev'
         uses: actions/cache@v4.0.2
         with:
           path: ~/.platformio
-          # yamllint disable-line rule:line-length
+          key: platformio-${{ matrix.pio_cache_key }}
-          key: platformio-${{ matrix.pio_cache_key }}-${{ hashFiles('platformio.ini') }}
+
+      - name: Cache platformio
+        if: github.ref != 'refs/heads/dev'
+        uses: actions/cache/restore@v4.0.2
+        with:
+          path: ~/.platformio
+          key: platformio-${{ matrix.pio_cache_key }}
 
       - name: Install clang-tidy
         run: sudo apt-get install clang-tidy-14
@@ -402,7 +410,7 @@ jobs:
       count: ${{ steps.list-components.outputs.count }}
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.1
+        uses: actions/checkout@v4.1.5
         with:
           # Fetch enough history so `git merge-base refs/remotes/origin/dev HEAD` works.
           fetch-depth: 500
@@ -450,7 +458,7 @@ jobs:
         run: sudo apt-get install libsodium-dev
 
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.1
+        uses: actions/checkout@v4.1.5
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -476,7 +484,7 @@ jobs:
       matrix: ${{ steps.split.outputs.components }}
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.1
+        uses: actions/checkout@v4.1.5
       - name: Split components into 20 groups
         id: split
         run: |
@@ -504,7 +512,7 @@ jobs:
         run: sudo apt-get install libsodium-dev
 
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.1
+        uses: actions/checkout@v4.1.5
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:

.github/workflows/release.yml

@@ -19,7 +19,7 @@ jobs:
       tag: ${{ steps.tag.outputs.tag }}
       branch_build: ${{ steps.tag.outputs.branch_build }}
     steps:
-      - uses: actions/checkout@v4.1.1
+      - uses: actions/checkout@v4.1.5
       - name: Get tag
         id: tag
         # yamllint disable rule:line-length
@@ -51,7 +51,7 @@ jobs:
       contents: read
       id-token: write
     steps:
-      - uses: actions/checkout@v4.1.1
+      - uses: actions/checkout@v4.1.5
       - name: Set up Python
         uses: actions/setup-python@v5.1.0
         with:
@@ -81,7 +81,7 @@ jobs:
           - linux/arm/v7
           - linux/arm64
     steps:
-      - uses: actions/checkout@v4.1.1
+      - uses: actions/checkout@v4.1.5
       - name: Set up Python
         uses: actions/setup-python@v5.1.0
         with:
@@ -132,6 +132,19 @@ jobs:
           suffix: lint
           version: ${{ needs.init.outputs.tag }}
 
+      - name: Sanitize platform name
+        id: sanitize
+        run: |
+          echo "${{ matrix.platform }}" | sed 's|/|-|g' > /tmp/platform
+          echo name=$(cat /tmp/platform) >> $GITHUB_OUTPUT
+
+      - name: Upload digests
+        uses: actions/upload-artifact@v4.3.3
+        with:
+          name: digests-${{ steps.sanitize.outputs.name }}
+          path: /tmp/digests
+          retention-days: 1
+
   deploy-manifest:
     name: Publish ESPHome ${{ matrix.image.title }} to ${{ matrix.registry }}
     runs-on: ubuntu-latest
@@ -159,12 +172,15 @@ jobs:
           - ghcr
           - dockerhub
     steps:
-      - uses: actions/checkout@v4.1.1
+      - uses: actions/checkout@v4.1.5
+
       - name: Download digests
-        uses: actions/download-artifact@v3.0.2
+        uses: actions/download-artifact@v4.1.7
         with:
-          name: digests-${{ matrix.image.target }}-${{ matrix.registry }}
+          pattern: digests-*
           path: /tmp/digests
+          merge-multiple: true
+
       - name: Set up Docker Buildx
         uses: docker/setup-buildx-action@v3.3.0
 
@@ -195,7 +211,7 @@ jobs:
           done
 
       - name: Create manifest list and push
-        working-directory: /tmp/digests
+        working-directory: /tmp/digests/${{ matrix.image.target }}/${{ matrix.registry }}
         run: |
           docker buildx imagetools create $(jq -Rcnr 'inputs | . / "," | map("-t " + .) | join(" ")' <<< "${{ steps.tags.outputs.tags}}") \
             $(printf '${{ steps.tags.outputs.image }}@sha256:%s ' *)

.github/workflows/sync-device-classes.yml

@@ -13,10 +13,10 @@ jobs:
     if: github.repository == 'esphome/esphome'
     steps:
       - name: Checkout
-        uses: actions/checkout@v4.1.1
+        uses: actions/checkout@v4.1.5
 
       - name: Checkout Home Assistant
-        uses: actions/checkout@v4.1.1
+        uses: actions/checkout@v4.1.5
         with:
           repository: home-assistant/core
           path: lib/home-assistant

.github/workflows/yaml-lint.yml

@@ -18,7 +18,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.1
+        uses: actions/checkout@v4.1.5
       - name: Run yamllint
         uses: frenck/action-yamllint@v1.5.0
         with:

.pre-commit-config.yaml

@@ -40,3 +40,10 @@ repos:
     hooks:
       - id: clang-format
         types_or: [c, c++]
+  - repo: local
+    hooks:
+      - id: pylint
+        name: pylint
+        entry: pylint
+        language: system
+        types: [python]

CODEOWNERS

@@ -136,6 +136,7 @@ esphome/components/fs3000/* @kahrendt
 esphome/components/ft5x06/* @clydebarrow
 esphome/components/ft63x6/* @gpambrozio
 esphome/components/gcja5/* @gcormier
+esphome/components/gdk101/* @Szewcson
 esphome/components/globals/* @esphome/core
 esphome/components/gp8403/* @jesserockz
 esphome/components/gpio/* @esphome/core

esphome/components/as5600/__init__.py

@@ -54,7 +54,6 @@ FAST_FILTER = {
     "LSB10": 7,
 }
 
-CONF_ANGLE = "angle"
 CONF_RAW_ANGLE = "raw_angle"
 CONF_RAW_POSITION = "raw_position"
 CONF_WATCHDOG = "watchdog"

esphome/components/as5600/sensor/__init__.py

@@ -11,6 +11,7 @@ from esphome.const import (
     CONF_MAGNITUDE,
     CONF_STATUS,
     CONF_POSITION,
+    CONF_ANGLE,
 )
 from .. import as5600_ns, AS5600Component
 
@@ -19,7 +20,6 @@ DEPENDENCIES = ["as5600"]
 
 AS5600Sensor = as5600_ns.class_("AS5600Sensor", sensor.Sensor, cg.PollingComponent)
 
-CONF_ANGLE = "angle"
 CONF_RAW_ANGLE = "raw_angle"
 CONF_RAW_POSITION = "raw_position"
 CONF_WATCHDOG = "watchdog"

esphome/components/ble_presence/ble_presence_device.h

@@ -6,16 +6,6 @@
 
 #ifdef USE_ESP32
 
-#ifdef USE_ARDUINO
-#include "mbedtls/aes.h"
-#include "mbedtls/base64.h"
-#endif
-
-#ifdef USE_ESP_IDF
-#define MBEDTLS_AES_ALT
-#include <aes_alt.h>
-#endif
-
 namespace esphome {
 namespace ble_presence {
 
@@ -72,7 +62,7 @@ class BLEPresenceDevice : public binary_sensor::BinarySensorInitiallyOff,
         }
         break;
       case MATCH_BY_IRK:
-        if (resolve_irk_(device.address_uint64(), this->irk_)) {
+        if (device.resolve_irk(this->irk_)) {
           this->set_found_(true);
           return true;
         }
@@ -142,43 +132,6 @@ class BLEPresenceDevice : public binary_sensor::BinarySensorInitiallyOff,
   bool check_ibeacon_minor_{false};
   bool check_minimum_rssi_{false};
 
-  bool resolve_irk_(uint64_t addr64, const uint8_t *irk) {
-    uint8_t ecb_key[16];
-    uint8_t ecb_plaintext[16];
-    uint8_t ecb_ciphertext[16];
-
-    memcpy(&ecb_key, irk, 16);
-    memset(&ecb_plaintext, 0, 16);
-
-    ecb_plaintext[13] = (addr64 >> 40) & 0xff;
-    ecb_plaintext[14] = (addr64 >> 32) & 0xff;
-    ecb_plaintext[15] = (addr64 >> 24) & 0xff;
-
-    mbedtls_aes_context ctx = {0, 0, {0}};
-    mbedtls_aes_init(&ctx);
-
-    if (mbedtls_aes_setkey_enc(&ctx, ecb_key, 128) != 0) {
-      mbedtls_aes_free(&ctx);
-      return false;
-    }
-
-    if (mbedtls_aes_crypt_ecb(&ctx,
-#ifdef USE_ARDUINO
-                              MBEDTLS_AES_ENCRYPT,
-#elif defined(USE_ESP_IDF)
-                              ESP_AES_ENCRYPT,
-#endif
-                              ecb_plaintext, ecb_ciphertext) != 0) {
-      mbedtls_aes_free(&ctx);
-      return false;
-    }
-
-    mbedtls_aes_free(&ctx);
-
-    return ecb_ciphertext[15] == (addr64 & 0xff) && ecb_ciphertext[14] == ((addr64 >> 8) & 0xff) &&
-           ecb_ciphertext[13] == ((addr64 >> 16) & 0xff);
-  }
-
   bool found_{false};
   uint32_t last_seen_{};
   uint32_t timeout_{};

esphome/components/ble_rssi/ble_rssi_sensor.h

@@ -15,6 +15,10 @@ class BLERSSISensor : public sensor::Sensor, public esp32_ble_tracker::ESPBTDevi
     this->match_by_ = MATCH_BY_MAC_ADDRESS;
     this->address_ = address;
   }
+  void set_irk(uint8_t *irk) {
+    this->match_by_ = MATCH_BY_IRK;
+    this->irk_ = irk;
+  }
   void set_service_uuid16(uint16_t uuid) {
     this->match_by_ = MATCH_BY_SERVICE_UUID;
     this->uuid_ = esp32_ble_tracker::ESPBTUUID::from_uint16(uuid);
@@ -53,6 +57,13 @@ class BLERSSISensor : public sensor::Sensor, public esp32_ble_tracker::ESPBTDevi
           return true;
         }
         break;
+      case MATCH_BY_IRK:
+        if (device.resolve_irk(this->irk_)) {
+          this->publish_state(device.get_rssi());
+          this->found_ = true;
+          return true;
+        }
+        break;
       case MATCH_BY_SERVICE_UUID:
         for (auto uuid : device.get_service_uuids()) {
           if (this->uuid_ == uuid) {
@@ -91,12 +102,13 @@ class BLERSSISensor : public sensor::Sensor, public esp32_ble_tracker::ESPBTDevi
   float get_setup_priority() const override { return setup_priority::DATA; }
 
  protected:
-  enum MatchType { MATCH_BY_MAC_ADDRESS, MATCH_BY_SERVICE_UUID, MATCH_BY_IBEACON_UUID };
+  enum MatchType { MATCH_BY_MAC_ADDRESS, MATCH_BY_IRK, MATCH_BY_SERVICE_UUID, MATCH_BY_IBEACON_UUID };
   MatchType match_by_;
 
   bool found_{false};
 
   uint64_t address_;
+  uint8_t *irk_;
 
   esp32_ble_tracker::ESPBTUUID uuid_;
 

esphome/components/ble_rssi/sensor.py

@@ -12,6 +12,8 @@ from esphome.const import (
     UNIT_DECIBEL_MILLIWATT,
 )
 
+CONF_IRK = "irk"
+
 DEPENDENCIES = ["esp32_ble_tracker"]
 
 ble_rssi_ns = cg.esphome_ns.namespace("ble_rssi")
@@ -39,6 +41,7 @@ CONFIG_SCHEMA = cv.All(
     .extend(
         {
             cv.Optional(CONF_MAC_ADDRESS): cv.mac_address,
+            cv.Optional(CONF_IRK): cv.uuid,
             cv.Optional(CONF_SERVICE_UUID): esp32_ble_tracker.bt_uuid,
             cv.Optional(CONF_IBEACON_MAJOR): cv.uint16_t,
             cv.Optional(CONF_IBEACON_MINOR): cv.uint16_t,
@@ -47,7 +50,9 @@ CONFIG_SCHEMA = cv.All(
     )
     .extend(esp32_ble_tracker.ESP_BLE_DEVICE_SCHEMA)
     .extend(cv.COMPONENT_SCHEMA),
-    cv.has_exactly_one_key(CONF_MAC_ADDRESS, CONF_SERVICE_UUID, CONF_IBEACON_UUID),
+    cv.has_exactly_one_key(
+        CONF_MAC_ADDRESS, CONF_IRK, CONF_SERVICE_UUID, CONF_IBEACON_UUID
+    ),
     _validate,
 )
 
@@ -60,6 +65,10 @@ async def to_code(config):
     if mac_address := config.get(CONF_MAC_ADDRESS):
         cg.add(var.set_address(mac_address.as_hex))
 
+    if irk := config.get(CONF_IRK):
+        irk = esp32_ble_tracker.as_hex_array(str(irk))
+        cg.add(var.set_irk(irk))
+
     if service_uuid := config.get(CONF_SERVICE_UUID):
         if len(service_uuid) == len(esp32_ble_tracker.bt_uuid16_format):
             cg.add(var.set_service_uuid16(esp32_ble_tracker.as_hex(service_uuid)))

esphome/components/bme280_base/__init__.py

@@ -1 +1,108 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import sensor
+from esphome.const import (
+    CONF_HUMIDITY,
+    CONF_ID,
+    CONF_IIR_FILTER,
+    CONF_OVERSAMPLING,
+    CONF_PRESSURE,
+    CONF_TEMPERATURE,
+    DEVICE_CLASS_HUMIDITY,
+    DEVICE_CLASS_PRESSURE,
+    DEVICE_CLASS_TEMPERATURE,
+    STATE_CLASS_MEASUREMENT,
+    UNIT_CELSIUS,
+    UNIT_HECTOPASCAL,
+    UNIT_PERCENT,
+)
+
 CODEOWNERS = ["@esphome/core"]
+
+bme280_ns = cg.esphome_ns.namespace("bme280_base")
+BME280Oversampling = bme280_ns.enum("BME280Oversampling")
+OVERSAMPLING_OPTIONS = {
+    "NONE": BME280Oversampling.BME280_OVERSAMPLING_NONE,
+    "1X": BME280Oversampling.BME280_OVERSAMPLING_1X,
+    "2X": BME280Oversampling.BME280_OVERSAMPLING_2X,
+    "4X": BME280Oversampling.BME280_OVERSAMPLING_4X,
+    "8X": BME280Oversampling.BME280_OVERSAMPLING_8X,
+    "16X": BME280Oversampling.BME280_OVERSAMPLING_16X,
+}
+
+BME280IIRFilter = bme280_ns.enum("BME280IIRFilter")
+IIR_FILTER_OPTIONS = {
+    "OFF": BME280IIRFilter.BME280_IIR_FILTER_OFF,
+    "2X": BME280IIRFilter.BME280_IIR_FILTER_2X,
+    "4X": BME280IIRFilter.BME280_IIR_FILTER_4X,
+    "8X": BME280IIRFilter.BME280_IIR_FILTER_8X,
+    "16X": BME280IIRFilter.BME280_IIR_FILTER_16X,
+}
+
+CONFIG_SCHEMA_BASE = cv.Schema(
+    {
+        cv.Optional(CONF_TEMPERATURE): sensor.sensor_schema(
+            unit_of_measurement=UNIT_CELSIUS,
+            accuracy_decimals=1,
+            device_class=DEVICE_CLASS_TEMPERATURE,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ).extend(
+            {
+                cv.Optional(CONF_OVERSAMPLING, default="16X"): cv.enum(
+                    OVERSAMPLING_OPTIONS, upper=True
+                ),
+            }
+        ),
+        cv.Optional(CONF_PRESSURE): sensor.sensor_schema(
+            unit_of_measurement=UNIT_HECTOPASCAL,
+            accuracy_decimals=1,
+            device_class=DEVICE_CLASS_PRESSURE,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ).extend(
+            {
+                cv.Optional(CONF_OVERSAMPLING, default="16X"): cv.enum(
+                    OVERSAMPLING_OPTIONS, upper=True
+                ),
+            }
+        ),
+        cv.Optional(CONF_HUMIDITY): sensor.sensor_schema(
+            unit_of_measurement=UNIT_PERCENT,
+            accuracy_decimals=1,
+            device_class=DEVICE_CLASS_HUMIDITY,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ).extend(
+            {
+                cv.Optional(CONF_OVERSAMPLING, default="16X"): cv.enum(
+                    OVERSAMPLING_OPTIONS, upper=True
+                ),
+            }
+        ),
+        cv.Optional(CONF_IIR_FILTER, default="OFF"): cv.enum(
+            IIR_FILTER_OPTIONS, upper=True
+        ),
+    }
+).extend(cv.polling_component_schema("60s"))
+
+
+async def to_code_base(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+
+    if temperature_config := config.get(CONF_TEMPERATURE):
+        sens = await sensor.new_sensor(temperature_config)
+        cg.add(var.set_temperature_sensor(sens))
+        cg.add(var.set_temperature_oversampling(temperature_config[CONF_OVERSAMPLING]))
+
+    if pressure_config := config.get(CONF_PRESSURE):
+        sens = await sensor.new_sensor(pressure_config)
+        cg.add(var.set_pressure_sensor(sens))
+        cg.add(var.set_pressure_oversampling(pressure_config[CONF_OVERSAMPLING]))
+
+    if humidity_config := config.get(CONF_HUMIDITY):
+        sens = await sensor.new_sensor(humidity_config)
+        cg.add(var.set_humidity_sensor(sens))
+        cg.add(var.set_humidity_oversampling(humidity_config[CONF_OVERSAMPLING]))
+
+    cg.add(var.set_iir_filter(config[CONF_IIR_FILTER]))
+
+    return var

esphome/components/bme280_base/sensor.py

@@ -1,106 +0,0 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
-from esphome.components import sensor
-from esphome.const import (
-    CONF_HUMIDITY,
-    CONF_ID,
-    CONF_IIR_FILTER,
-    CONF_OVERSAMPLING,
-    CONF_PRESSURE,
-    CONF_TEMPERATURE,
-    DEVICE_CLASS_HUMIDITY,
-    DEVICE_CLASS_PRESSURE,
-    DEVICE_CLASS_TEMPERATURE,
-    STATE_CLASS_MEASUREMENT,
-    UNIT_CELSIUS,
-    UNIT_HECTOPASCAL,
-    UNIT_PERCENT,
-)
-
-bme280_ns = cg.esphome_ns.namespace("bme280_base")
-BME280Oversampling = bme280_ns.enum("BME280Oversampling")
-OVERSAMPLING_OPTIONS = {
-    "NONE": BME280Oversampling.BME280_OVERSAMPLING_NONE,
-    "1X": BME280Oversampling.BME280_OVERSAMPLING_1X,
-    "2X": BME280Oversampling.BME280_OVERSAMPLING_2X,
-    "4X": BME280Oversampling.BME280_OVERSAMPLING_4X,
-    "8X": BME280Oversampling.BME280_OVERSAMPLING_8X,
-    "16X": BME280Oversampling.BME280_OVERSAMPLING_16X,
-}
-
-BME280IIRFilter = bme280_ns.enum("BME280IIRFilter")
-IIR_FILTER_OPTIONS = {
-    "OFF": BME280IIRFilter.BME280_IIR_FILTER_OFF,
-    "2X": BME280IIRFilter.BME280_IIR_FILTER_2X,
-    "4X": BME280IIRFilter.BME280_IIR_FILTER_4X,
-    "8X": BME280IIRFilter.BME280_IIR_FILTER_8X,
-    "16X": BME280IIRFilter.BME280_IIR_FILTER_16X,
-}
-
-CONFIG_SCHEMA_BASE = cv.Schema(
-    {
-        cv.Optional(CONF_TEMPERATURE): sensor.sensor_schema(
-            unit_of_measurement=UNIT_CELSIUS,
-            accuracy_decimals=1,
-            device_class=DEVICE_CLASS_TEMPERATURE,
-            state_class=STATE_CLASS_MEASUREMENT,
-        ).extend(
-            {
-                cv.Optional(CONF_OVERSAMPLING, default="16X"): cv.enum(
-                    OVERSAMPLING_OPTIONS, upper=True
-                ),
-            }
-        ),
-        cv.Optional(CONF_PRESSURE): sensor.sensor_schema(
-            unit_of_measurement=UNIT_HECTOPASCAL,
-            accuracy_decimals=1,
-            device_class=DEVICE_CLASS_PRESSURE,
-            state_class=STATE_CLASS_MEASUREMENT,
-        ).extend(
-            {
-                cv.Optional(CONF_OVERSAMPLING, default="16X"): cv.enum(
-                    OVERSAMPLING_OPTIONS, upper=True
-                ),
-            }
-        ),
-        cv.Optional(CONF_HUMIDITY): sensor.sensor_schema(
-            unit_of_measurement=UNIT_PERCENT,
-            accuracy_decimals=1,
-            device_class=DEVICE_CLASS_HUMIDITY,
-            state_class=STATE_CLASS_MEASUREMENT,
-        ).extend(
-            {
-                cv.Optional(CONF_OVERSAMPLING, default="16X"): cv.enum(
-                    OVERSAMPLING_OPTIONS, upper=True
-                ),
-            }
-        ),
-        cv.Optional(CONF_IIR_FILTER, default="OFF"): cv.enum(
-            IIR_FILTER_OPTIONS, upper=True
-        ),
-    }
-).extend(cv.polling_component_schema("60s"))
-
-
-async def to_code(config, func=None):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await cg.register_component(var, config)
-    if func is not None:
-        await func(var, config)
-
-    if temperature_config := config.get(CONF_TEMPERATURE):
-        sens = await sensor.new_sensor(temperature_config)
-        cg.add(var.set_temperature_sensor(sens))
-        cg.add(var.set_temperature_oversampling(temperature_config[CONF_OVERSAMPLING]))
-
-    if pressure_config := config.get(CONF_PRESSURE):
-        sens = await sensor.new_sensor(pressure_config)
-        cg.add(var.set_pressure_sensor(sens))
-        cg.add(var.set_pressure_oversampling(pressure_config[CONF_OVERSAMPLING]))
-
-    if humidity_config := config.get(CONF_HUMIDITY):
-        sens = await sensor.new_sensor(humidity_config)
-        cg.add(var.set_humidity_sensor(sens))
-        cg.add(var.set_humidity_oversampling(humidity_config[CONF_OVERSAMPLING]))
-
-    cg.add(var.set_iir_filter(config[CONF_IIR_FILTER]))

esphome/components/bme280_i2c/sensor.py

@@ -1,9 +1,10 @@
 import esphome.codegen as cg
+import esphome.config_validation as cv
 from esphome.components import i2c
-from ..bme280_base.sensor import to_code as to_code_base, cv, CONFIG_SCHEMA_BASE
+from ..bme280_base import to_code_base, CONFIG_SCHEMA_BASE
 
-DEPENDENCIES = ["i2c"]
 AUTO_LOAD = ["bme280_base"]
+DEPENDENCIES = ["i2c"]
 
 bme280_ns = cg.esphome_ns.namespace("bme280_i2c")
 BME280I2CComponent = bme280_ns.class_(
@@ -16,4 +17,5 @@ CONFIG_SCHEMA = CONFIG_SCHEMA_BASE.extend(
 
 
 async def to_code(config):
-    await to_code_base(config, func=i2c.register_i2c_device)
+    var = await to_code_base(config)
+    await i2c.register_i2c_device(var, config)

esphome/components/bme280_spi/__init__.py

@@ -1 +0,0 @@
-CODEOWNERS = ["@apbodrov"]

esphome/components/bme280_spi/bme280_spi.cpp

@@ -4,19 +4,19 @@
 #include "bme280_spi.h"
 #include <esphome/components/bme280_base/bme280_base.h>
 
-int set_bit(uint8_t num, int position) {
+namespace esphome {
+namespace bme280_spi {
+
+uint8_t set_bit(uint8_t num, int position) {
   int mask = 1 << position;
   return num | mask;
 }
 
-int clear_bit(uint8_t num, int position) {
+uint8_t clear_bit(uint8_t num, int position) {
   int mask = 1 << position;
   return num & ~mask;
 }
 
-namespace esphome {
-namespace bme280_spi {
-
 void BME280SPIComponent::setup() {
   this->spi_setup();
   BME280Component::setup();
@@ -30,34 +30,33 @@ void BME280SPIComponent::setup() {
 
 bool BME280SPIComponent::read_byte(uint8_t a_register, uint8_t *data) {
   this->enable();
-  // cause: *data = this->delegate_->transfer(tmp) doesnt work
+  this->transfer_byte(set_bit(a_register, 7));
-  this->delegate_->transfer(set_bit(a_register, 7));
+  *data = this->transfer_byte(0);
-  *data = this->delegate_->transfer(0);
   this->disable();
   return true;
 }
 
 bool BME280SPIComponent::write_byte(uint8_t a_register, uint8_t data) {
   this->enable();
-  this->delegate_->transfer(clear_bit(a_register, 7));
+  this->transfer_byte(clear_bit(a_register, 7));
-  this->delegate_->transfer(data);
+  this->transfer_byte(data);
   this->disable();
   return true;
 }
 
 bool BME280SPIComponent::read_bytes(uint8_t a_register, uint8_t *data, size_t len) {
   this->enable();
-  this->delegate_->transfer(set_bit(a_register, 7));
+  this->transfer_byte(set_bit(a_register, 7));
-  this->delegate_->read_array(data, len);
+  this->read_array(data, len);
   this->disable();
   return true;
 }
 
 bool BME280SPIComponent::read_byte_16(uint8_t a_register, uint16_t *data) {
   this->enable();
-  this->delegate_->transfer(set_bit(a_register, 7));
+  this->transfer_byte(set_bit(a_register, 7));
-  ((uint8_t *) data)[1] = this->delegate_->transfer(0);
+  ((uint8_t *) data)[1] = this->transfer_byte(0);
-  ((uint8_t *) data)[0] = this->delegate_->transfer(0);
+  ((uint8_t *) data)[0] = this->transfer_byte(0);
   this->disable();
   return true;
 }

esphome/components/bme280_spi/sensor.py

@@ -1,13 +1,11 @@
 import esphome.codegen as cg
+import esphome.config_validation as cv
 from esphome.components import spi
-from esphome.components.bme280_base.sensor import (
+from ..bme280_base import to_code_base, CONFIG_SCHEMA_BASE
-    to_code as to_code_base,
-    cv,
-    CONFIG_SCHEMA_BASE,
-)
 
-DEPENDENCIES = ["spi"]
 AUTO_LOAD = ["bme280_base"]
+CODEOWNERS = ["@apbodrov"]
+DEPENDENCIES = ["spi"]
 
 
 bme280_spi_ns = cg.esphome_ns.namespace("bme280_spi")
@@ -21,4 +19,5 @@ CONFIG_SCHEMA = CONFIG_SCHEMA_BASE.extend(spi.spi_device_schema()).extend(
 
 
 async def to_code(config):
-    await to_code_base(config, func=spi.register_spi_device)
+    var = await to_code_base(config)
+    await spi.register_spi_device(var, config)

esphome/components/color/__init__.py

@@ -14,15 +14,41 @@ CONF_HEX = "hex"
 
 
 def hex_color(value):
+    if isinstance(value, int):
+        value = str(value)
+    if not isinstance(value, str):
+        raise cv.Invalid("Invalid value for hex color")
     if len(value) != 6:
-        raise cv.Invalid("Color must have six digits")
+        raise cv.Invalid("Hex color must have six digits")
     try:
-        return (int(value[0:2], 16), int(value[2:4], 16), int(value[4:6], 16))
+        return int(value[0:2], 16), int(value[2:4], 16), int(value[4:6], 16)
     except ValueError as exc:
         raise cv.Invalid("Color must be hexadecimal") from exc
 
 
-CONFIG_SCHEMA = cv.Any(
+components = {
+    CONF_RED,
+    CONF_RED_INT,
+    CONF_GREEN,
+    CONF_GREEN_INT,
+    CONF_BLUE,
+    CONF_BLUE_INT,
+    CONF_WHITE,
+    CONF_WHITE_INT,
+}
+
+
+def validate_color(config):
+    has_components = set(config) & components
+    has_hex = CONF_HEX in config
+    if has_hex and has_components:
+        raise cv.Invalid("Hex color value may not be combined with component values")
+    if not has_hex and not has_components:
+        raise cv.Invalid("Must provide at least one color option")
+    return config
+
+
+CONFIG_SCHEMA = cv.All(
     cv.Schema(
         {
             cv.Required(CONF_ID): cv.declare_id(ColorStruct),
@@ -34,14 +60,10 @@ CONFIG_SCHEMA = cv.Any(
             cv.Exclusive(CONF_BLUE_INT, "blue"): cv.uint8_t,
             cv.Exclusive(CONF_WHITE, "white"): cv.percentage,
             cv.Exclusive(CONF_WHITE_INT, "white"): cv.uint8_t,
+            cv.Optional(CONF_HEX): hex_color,
         }
     ).extend(cv.COMPONENT_SCHEMA),
-    cv.Schema(
+    validate_color,
-        {
-            cv.Required(CONF_ID): cv.declare_id(ColorStruct),
-            cv.Required(CONF_HEX): hex_color,
-        }
-    ).extend(cv.COMPONENT_SCHEMA),
 )
 
 

esphome/components/cst816/touchscreen/cst816_touchscreen.cpp

@@ -15,6 +15,7 @@ void CST816Touchscreen::continue_setup_() {
   }
   switch (this->chip_id_) {
     case CST820_CHIP_ID:
+    case CST826_CHIP_ID:
     case CST716_CHIP_ID:
     case CST816S_CHIP_ID:
     case CST816D_CHIP_ID:
@@ -90,6 +91,9 @@ void CST816Touchscreen::dump_config() {
     case CST820_CHIP_ID:
       name = "CST820";
       break;
+    case CST826_CHIP_ID:
+      name = "CST826";
+      break;
     case CST816S_CHIP_ID:
       name = "CST816S";
       break;

esphome/components/cst816/touchscreen/cst816_touchscreen.h

@@ -24,6 +24,7 @@ static const uint8_t REG_SLEEP = 0xE5;
 static const uint8_t REG_IRQ_CTL = 0xFA;
 static const uint8_t IRQ_EN_MOTION = 0x70;
 
+static const uint8_t CST826_CHIP_ID = 0x11;
 static const uint8_t CST820_CHIP_ID = 0xB7;
 static const uint8_t CST816S_CHIP_ID = 0xB4;
 static const uint8_t CST816D_CHIP_ID = 0xB6;

esphome/components/datetime/__init__.py

@@ -169,7 +169,7 @@ async def to_code(config):
         {
             cv.Required(CONF_ID): cv.use_id(DateEntity),
             cv.Required(CONF_DATE): cv.Any(
-                cv.returning_lambda, cv.date_time(allowed_time=False)
+                cv.returning_lambda, cv.date_time(date=True, time=False)
             ),
         }
     ),
@@ -200,7 +200,7 @@ async def datetime_date_set_to_code(config, action_id, template_arg, args):
         {
             cv.Required(CONF_ID): cv.use_id(TimeEntity),
             cv.Required(CONF_TIME): cv.Any(
-                cv.returning_lambda, cv.date_time(allowed_date=False)
+                cv.returning_lambda, cv.date_time(date=False, time=True)
             ),
         }
     ),
@@ -230,7 +230,9 @@ async def datetime_time_set_to_code(config, action_id, template_arg, args):
     cv.Schema(
         {
             cv.Required(CONF_ID): cv.use_id(DateTimeEntity),
-            cv.Required(CONF_DATETIME): cv.Any(cv.returning_lambda, cv.date_time()),
+            cv.Required(CONF_DATETIME): cv.Any(
+                cv.returning_lambda, cv.date_time(date=True, time=True)
+            ),
         },
     ),
 )

esphome/components/debug/debug_component.cpp

@@ -8,62 +8,16 @@
 #include <cinttypes>
 #include <climits>
 
-#ifdef USE_ESP32
-
-#include <esp_heap_caps.h>
-#include <esp_system.h>
-
-#include <esp_chip_info.h>
-#if defined(USE_ESP32_VARIANT_ESP32)
-#include <esp32/rom/rtc.h>
-#elif defined(USE_ESP32_VARIANT_ESP32C3)
-#include <esp32c3/rom/rtc.h>
-#elif defined(USE_ESP32_VARIANT_ESP32C6)
-#include <esp32c6/rom/rtc.h>
-#elif defined(USE_ESP32_VARIANT_ESP32S2)
-#include <esp32s2/rom/rtc.h>
-#elif defined(USE_ESP32_VARIANT_ESP32S3)
-#include <esp32s3/rom/rtc.h>
-#endif
-
-#endif  // USE_ESP32
-
-#ifdef USE_ARDUINO
-#ifdef USE_RP2040
-#include <Arduino.h>
-#elif defined(USE_ESP32) || defined(USE_ESP8266)
-#include <Esp.h>
-#endif
-#endif
-
 namespace esphome {
 namespace debug {
 
 static const char *const TAG = "debug";
 
-static uint32_t get_free_heap() {
-#if defined(USE_ESP8266)
-  return ESP.getFreeHeap();  // NOLINT(readability-static-accessed-through-instance)
-#elif defined(USE_ESP32)
-  return heap_caps_get_free_size(MALLOC_CAP_INTERNAL);
-#elif defined(USE_RP2040)
-  return rp2040.getFreeHeap();
-#elif defined(USE_LIBRETINY)
-  return lt_heap_get_free();
-#elif defined(USE_HOST)
-  return INT_MAX;
-#endif
-}
-
 void DebugComponent::dump_config() {
 #ifndef ESPHOME_LOG_HAS_DEBUG
   return;  // Can't log below if debug logging is disabled
 #endif
 
-  std::string device_info;
-  std::string reset_reason;
-  device_info.reserve(256);
-
   ESP_LOGCONFIG(TAG, "Debug component:");
 #ifdef USE_TEXT_SENSOR
   LOG_TEXT_SENSOR("  ", "Device info", this->device_info_);
@@ -76,305 +30,15 @@ void DebugComponent::dump_config() {
 #endif  // defined(USE_ESP8266) && USE_ARDUINO_VERSION_CODE >= VERSION_CODE(2, 5, 2)
 #endif  // USE_SENSOR
 
+  std::string device_info;
+  device_info.reserve(256);
   ESP_LOGD(TAG, "ESPHome version %s", ESPHOME_VERSION);
   device_info += ESPHOME_VERSION;
 
-  this->free_heap_ = get_free_heap();
+  this->free_heap_ = get_free_heap_();
   ESP_LOGD(TAG, "Free Heap Size: %" PRIu32 " bytes", this->free_heap_);
 
-#if defined(USE_ARDUINO) && (defined(USE_ESP32) || defined(USE_ESP8266))
+  get_device_info_(device_info);
-  const char *flash_mode;
-  switch (ESP.getFlashChipMode()) {  // NOLINT(readability-static-accessed-through-instance)
-    case FM_QIO:
-      flash_mode = "QIO";
-      break;
-    case FM_QOUT:
-      flash_mode = "QOUT";
-      break;
-    case FM_DIO:
-      flash_mode = "DIO";
-      break;
-    case FM_DOUT:
-      flash_mode = "DOUT";
-      break;
-#ifdef USE_ESP32
-    case FM_FAST_READ:
-      flash_mode = "FAST_READ";
-      break;
-    case FM_SLOW_READ:
-      flash_mode = "SLOW_READ";
-      break;
-#endif
-    default:
-      flash_mode = "UNKNOWN";
-  }
-  ESP_LOGD(TAG, "Flash Chip: Size=%ukB Speed=%uMHz Mode=%s",
-           ESP.getFlashChipSize() / 1024,                                                   // NOLINT
-           ESP.getFlashChipSpeed() / 1000000, flash_mode);                                  // NOLINT
-  device_info += "|Flash: " + to_string(ESP.getFlashChipSize() / 1024) +                    // NOLINT
-                 "kB Speed:" + to_string(ESP.getFlashChipSpeed() / 1000000) + "MHz Mode:";  // NOLINT
-  device_info += flash_mode;
-#endif  // USE_ARDUINO && (USE_ESP32 || USE_ESP8266)
-
-#ifdef USE_ESP32
-  esp_chip_info_t info;
-  esp_chip_info(&info);
-  const char *model;
-#if defined(USE_ESP32_VARIANT_ESP32)
-  model = "ESP32";
-#elif defined(USE_ESP32_VARIANT_ESP32C3)
-  model = "ESP32-C3";
-#elif defined(USE_ESP32_VARIANT_ESP32C6)
-  model = "ESP32-C6";
-#elif defined(USE_ESP32_VARIANT_ESP32S2)
-  model = "ESP32-S2";
-#elif defined(USE_ESP32_VARIANT_ESP32S3)
-  model = "ESP32-S3";
-#elif defined(USE_ESP32_VARIANT_ESP32H2)
-  model = "ESP32-H2";
-#else
-  model = "UNKNOWN";
-#endif
-  std::string features;
-  if (info.features & CHIP_FEATURE_EMB_FLASH) {
-    features += "EMB_FLASH,";
-    info.features &= ~CHIP_FEATURE_EMB_FLASH;
-  }
-  if (info.features & CHIP_FEATURE_WIFI_BGN) {
-    features += "WIFI_BGN,";
-    info.features &= ~CHIP_FEATURE_WIFI_BGN;
-  }
-  if (info.features & CHIP_FEATURE_BLE) {
-    features += "BLE,";
-    info.features &= ~CHIP_FEATURE_BLE;
-  }
-  if (info.features & CHIP_FEATURE_BT) {
-    features += "BT,";
-    info.features &= ~CHIP_FEATURE_BT;
-  }
-  if (info.features & CHIP_FEATURE_EMB_PSRAM) {
-    features += "EMB_PSRAM,";
-    info.features &= ~CHIP_FEATURE_EMB_PSRAM;
-  }
-  if (info.features)
-    features += "Other:" + format_hex(info.features);
-  ESP_LOGD(TAG, "Chip: Model=%s, Features=%s Cores=%u, Revision=%u", model, features.c_str(), info.cores,
-           info.revision);
-  device_info += "|Chip: ";
-  device_info += model;
-  device_info += " Features:";
-  device_info += features;
-  device_info += " Cores:" + to_string(info.cores);
-  device_info += " Revision:" + to_string(info.revision);
-
-  ESP_LOGD(TAG, "ESP-IDF Version: %s", esp_get_idf_version());
-  device_info += "|ESP-IDF: ";
-  device_info += esp_get_idf_version();
-
-  std::string mac = get_mac_address_pretty();
-  ESP_LOGD(TAG, "EFuse MAC: %s", mac.c_str());
-  device_info += "|EFuse MAC: ";
-  device_info += mac;
-
-  switch (rtc_get_reset_reason(0)) {
-    case POWERON_RESET:
-      reset_reason = "Power On Reset";
-      break;
-#if defined(USE_ESP32_VARIANT_ESP32)
-    case SW_RESET:
-#elif defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3)
-    case RTC_SW_SYS_RESET:
-#endif
-      reset_reason = "Software Reset Digital Core";
-      break;
-#if defined(USE_ESP32_VARIANT_ESP32)
-    case OWDT_RESET:
-      reset_reason = "Watch Dog Reset Digital Core";
-      break;
-#endif
-    case DEEPSLEEP_RESET:
-      reset_reason = "Deep Sleep Reset Digital Core";
-      break;
-#if defined(USE_ESP32_VARIANT_ESP32)
-    case SDIO_RESET:
-      reset_reason = "SLC Module Reset Digital Core";
-      break;
-#endif
-    case TG0WDT_SYS_RESET:
-      reset_reason = "Timer Group 0 Watch Dog Reset Digital Core";
-      break;
-    case TG1WDT_SYS_RESET:
-      reset_reason = "Timer Group 1 Watch Dog Reset Digital Core";
-      break;
-    case RTCWDT_SYS_RESET:
-      reset_reason = "RTC Watch Dog Reset Digital Core";
-      break;
-#if !defined(USE_ESP32_VARIANT_ESP32C6)
-    case INTRUSION_RESET:
-      reset_reason = "Intrusion Reset CPU";
-      break;
-#endif
-#if defined(USE_ESP32_VARIANT_ESP32)
-    case TGWDT_CPU_RESET:
-      reset_reason = "Timer Group Reset CPU";
-      break;
-#elif defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3)
-    case TG0WDT_CPU_RESET:
-      reset_reason = "Timer Group 0 Reset CPU";
-      break;
-#endif
-#if defined(USE_ESP32_VARIANT_ESP32)
-    case SW_CPU_RESET:
-#elif defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3)
-    case RTC_SW_CPU_RESET:
-#endif
-      reset_reason = "Software Reset CPU";
-      break;
-    case RTCWDT_CPU_RESET:
-      reset_reason = "RTC Watch Dog Reset CPU";
-      break;
-#if defined(USE_ESP32_VARIANT_ESP32)
-    case EXT_CPU_RESET:
-      reset_reason = "External CPU Reset";
-      break;
-#endif
-    case RTCWDT_BROWN_OUT_RESET:
-      reset_reason = "Voltage Unstable Reset";
-      break;
-    case RTCWDT_RTC_RESET:
-      reset_reason = "RTC Watch Dog Reset Digital Core And RTC Module";
-      break;
-#if defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3)
-    case TG1WDT_CPU_RESET:
-      reset_reason = "Timer Group 1 Reset CPU";
-      break;
-    case SUPER_WDT_RESET:
-      reset_reason = "Super Watchdog Reset Digital Core And RTC Module";
-      break;
-    case GLITCH_RTC_RESET:
-      reset_reason = "Glitch Reset Digital Core And RTC Module";
-      break;
-    case EFUSE_RESET:
-      reset_reason = "eFuse Reset Digital Core";
-      break;
-#endif
-#if defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S3)
-    case USB_UART_CHIP_RESET:
-      reset_reason = "USB UART Reset Digital Core";
-      break;
-    case USB_JTAG_CHIP_RESET:
-      reset_reason = "USB JTAG Reset Digital Core";
-      break;
-    case POWER_GLITCH_RESET:
-      reset_reason = "Power Glitch Reset Digital Core And RTC Module";
-      break;
-#endif
-    default:
-      reset_reason = "Unknown Reset Reason";
-  }
-  ESP_LOGD(TAG, "Reset Reason: %s", reset_reason.c_str());
-  device_info += "|Reset: ";
-  device_info += reset_reason;
-
-  const char *wakeup_reason;
-  switch (rtc_get_wakeup_cause()) {
-    case NO_SLEEP:
-      wakeup_reason = "No Sleep";
-      break;
-    case EXT_EVENT0_TRIG:
-      wakeup_reason = "External Event 0";
-      break;
-    case EXT_EVENT1_TRIG:
-      wakeup_reason = "External Event 1";
-      break;
-    case GPIO_TRIG:
-      wakeup_reason = "GPIO";
-      break;
-    case TIMER_EXPIRE:
-      wakeup_reason = "Wakeup Timer";
-      break;
-    case SDIO_TRIG:
-      wakeup_reason = "SDIO";
-      break;
-    case MAC_TRIG:
-      wakeup_reason = "MAC";
-      break;
-    case UART0_TRIG:
-      wakeup_reason = "UART0";
-      break;
-    case UART1_TRIG:
-      wakeup_reason = "UART1";
-      break;
-    case TOUCH_TRIG:
-      wakeup_reason = "Touch";
-      break;
-    case SAR_TRIG:
-      wakeup_reason = "SAR";
-      break;
-    case BT_TRIG:
-      wakeup_reason = "BT";
-      break;
-    default:
-      wakeup_reason = "Unknown";
-  }
-  ESP_LOGD(TAG, "Wakeup Reason: %s", wakeup_reason);
-  device_info += "|Wakeup: ";
-  device_info += wakeup_reason;
-#endif
-
-#if defined(USE_ESP8266) && !defined(CLANG_TIDY)
-  ESP_LOGD(TAG, "Chip ID: 0x%08X", ESP.getChipId());
-  ESP_LOGD(TAG, "SDK Version: %s", ESP.getSdkVersion());
-  ESP_LOGD(TAG, "Core Version: %s", ESP.getCoreVersion().c_str());
-  ESP_LOGD(TAG, "Boot Version=%u Mode=%u", ESP.getBootVersion(), ESP.getBootMode());
-  ESP_LOGD(TAG, "CPU Frequency: %u", ESP.getCpuFreqMHz());
-  ESP_LOGD(TAG, "Flash Chip ID=0x%08X", ESP.getFlashChipId());
-  ESP_LOGD(TAG, "Reset Reason: %s", ESP.getResetReason().c_str());
-  ESP_LOGD(TAG, "Reset Info: %s", ESP.getResetInfo().c_str());
-
-  device_info += "|Chip: 0x" + format_hex(ESP.getChipId());
-  device_info += "|SDK: ";
-  device_info += ESP.getSdkVersion();
-  device_info += "|Core: ";
-  device_info += ESP.getCoreVersion().c_str();
-  device_info += "|Boot: ";
-  device_info += to_string(ESP.getBootVersion());
-  device_info += "|Mode: " + to_string(ESP.getBootMode());
-  device_info += "|CPU: " + to_string(ESP.getCpuFreqMHz());
-  device_info += "|Flash: 0x" + format_hex(ESP.getFlashChipId());
-  device_info += "|Reset: ";
-  device_info += ESP.getResetReason().c_str();
-  device_info += "|";
-  device_info += ESP.getResetInfo().c_str();
-
-  reset_reason = ESP.getResetReason().c_str();
-#endif
-
-#ifdef USE_RP2040
-  ESP_LOGD(TAG, "CPU Frequency: %u", rp2040.f_cpu());
-  device_info += "CPU Frequency: " + to_string(rp2040.f_cpu());
-#endif  // USE_RP2040
-
-#ifdef USE_LIBRETINY
-  ESP_LOGD(TAG, "LibreTiny Version: %s", lt_get_version());
-  ESP_LOGD(TAG, "Chip: %s (%04x) @ %u MHz", lt_cpu_get_model_name(), lt_cpu_get_model(), lt_cpu_get_freq_mhz());
-  ESP_LOGD(TAG, "Chip ID: 0x%06X", lt_cpu_get_mac_id());
-  ESP_LOGD(TAG, "Board: %s", lt_get_board_code());
-  ESP_LOGD(TAG, "Flash: %u KiB / RAM: %u KiB", lt_flash_get_size() / 1024, lt_ram_get_size() / 1024);
-  ESP_LOGD(TAG, "Reset Reason: %s", lt_get_reboot_reason_name(lt_get_reboot_reason()));
-
-  device_info += "|Version: ";
-  device_info += LT_BANNER_STR + 10;
-  device_info += "|Reset Reason: ";
-  device_info += lt_get_reboot_reason_name(lt_get_reboot_reason());
-  device_info += "|Chip Name: ";
-  device_info += lt_cpu_get_model_name();
-  device_info += "|Chip ID: 0x" + format_hex(lt_cpu_get_mac_id());
-  device_info += "|Flash: " + to_string(lt_flash_get_size() / 1024) + " KiB";
-  device_info += "|RAM: " + to_string(lt_ram_get_size() / 1024) + " KiB";
-
-  reset_reason = lt_get_reboot_reason_name(lt_get_reboot_reason());
-#endif  // USE_LIBRETINY
 
 #ifdef USE_TEXT_SENSOR
   if (this->device_info_ != nullptr) {
@@ -383,14 +47,14 @@ void DebugComponent::dump_config() {
     this->device_info_->publish_state(device_info);
   }
   if (this->reset_reason_ != nullptr) {
-    this->reset_reason_->publish_state(reset_reason);
+    this->reset_reason_->publish_state(get_reset_reason_());
   }
 #endif  // USE_TEXT_SENSOR
 }
 
 void DebugComponent::loop() {
   // log when free heap space has halved
-  uint32_t new_free_heap = get_free_heap();
+  uint32_t new_free_heap = get_free_heap_();
   if (new_free_heap < this->free_heap_ / 2) {
     this->free_heap_ = new_free_heap;
     ESP_LOGD(TAG, "Free Heap Size: %" PRIu32 " bytes", this->free_heap_);
@@ -411,38 +75,16 @@ void DebugComponent::loop() {
 void DebugComponent::update() {
 #ifdef USE_SENSOR
   if (this->free_sensor_ != nullptr) {
-    this->free_sensor_->publish_state(get_free_heap());
+    this->free_sensor_->publish_state(get_free_heap_());
   }
 
-  if (this->block_sensor_ != nullptr) {
-#if defined(USE_ESP8266)
-    // NOLINTNEXTLINE(readability-static-accessed-through-instance)
-    this->block_sensor_->publish_state(ESP.getMaxFreeBlockSize());
-#elif defined(USE_ESP32)
-    this->block_sensor_->publish_state(heap_caps_get_largest_free_block(MALLOC_CAP_INTERNAL));
-#elif defined(USE_LIBRETINY)
-    this->block_sensor_->publish_state(lt_heap_get_max_alloc());
-#endif
-  }
-
-#if defined(USE_ESP8266) && USE_ARDUINO_VERSION_CODE >= VERSION_CODE(2, 5, 2)
-  if (this->fragmentation_sensor_ != nullptr) {
-    // NOLINTNEXTLINE(readability-static-accessed-through-instance)
-    this->fragmentation_sensor_->publish_state(ESP.getHeapFragmentation());
-  }
-#endif
-
   if (this->loop_time_sensor_ != nullptr) {
     this->loop_time_sensor_->publish_state(this->max_loop_time_);
     this->max_loop_time_ = 0;
   }
 
-#ifdef USE_ESP32
-  if (this->psram_sensor_ != nullptr) {
-    this->psram_sensor_->publish_state(heap_caps_get_free_size(MALLOC_CAP_SPIRAM));
-  }
-#endif  // USE_ESP32
 #endif  // USE_SENSOR
+  update_platform_();
 }
 
 float DebugComponent::get_setup_priority() const { return setup_priority::LATE; }

esphome/components/debug/debug_component.h

@@ -59,6 +59,11 @@ class DebugComponent : public PollingComponent {
   text_sensor::TextSensor *device_info_{nullptr};
   text_sensor::TextSensor *reset_reason_{nullptr};
 #endif  // USE_TEXT_SENSOR
+
+  std::string get_reset_reason_();
+  uint32_t get_free_heap_();
+  void get_device_info_(std::string &device_info);
+  void update_platform_();
 };
 
 }  // namespace debug

esphome/components/debug/debug_esp32.cpp

@@ -0,0 +1,287 @@
+#include "debug_component.h"
+#ifdef USE_ESP32
+#include "esphome/core/log.h"
+
+#include <esp_heap_caps.h>
+#include <esp_system.h>
+#include <esp_chip_info.h>
+
+#if defined(USE_ESP32_VARIANT_ESP32)
+#include <esp32/rom/rtc.h>
+#elif defined(USE_ESP32_VARIANT_ESP32C3)
+#include <esp32c3/rom/rtc.h>
+#elif defined(USE_ESP32_VARIANT_ESP32C6)
+#include <esp32c6/rom/rtc.h>
+#elif defined(USE_ESP32_VARIANT_ESP32S2)
+#include <esp32s2/rom/rtc.h>
+#elif defined(USE_ESP32_VARIANT_ESP32S3)
+#include <esp32s3/rom/rtc.h>
+#endif
+#ifdef USE_ARDUINO
+#include <Esp.h>
+#endif
+
+namespace esphome {
+namespace debug {
+
+static const char *const TAG = "debug";
+
+std::string DebugComponent::get_reset_reason_() {
+  std::string reset_reason;
+  switch (rtc_get_reset_reason(0)) {
+    case POWERON_RESET:
+      reset_reason = "Power On Reset";
+      break;
+#if defined(USE_ESP32_VARIANT_ESP32)
+    case SW_RESET:
+#elif defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3)
+    case RTC_SW_SYS_RESET:
+#endif
+      reset_reason = "Software Reset Digital Core";
+      break;
+#if defined(USE_ESP32_VARIANT_ESP32)
+    case OWDT_RESET:
+      reset_reason = "Watch Dog Reset Digital Core";
+      break;
+#endif
+    case DEEPSLEEP_RESET:
+      reset_reason = "Deep Sleep Reset Digital Core";
+      break;
+#if defined(USE_ESP32_VARIANT_ESP32)
+    case SDIO_RESET:
+      reset_reason = "SLC Module Reset Digital Core";
+      break;
+#endif
+    case TG0WDT_SYS_RESET:
+      reset_reason = "Timer Group 0 Watch Dog Reset Digital Core";
+      break;
+    case TG1WDT_SYS_RESET:
+      reset_reason = "Timer Group 1 Watch Dog Reset Digital Core";
+      break;
+    case RTCWDT_SYS_RESET:
+      reset_reason = "RTC Watch Dog Reset Digital Core";
+      break;
+#if !defined(USE_ESP32_VARIANT_ESP32C6)
+    case INTRUSION_RESET:
+      reset_reason = "Intrusion Reset CPU";
+      break;
+#endif
+#if defined(USE_ESP32_VARIANT_ESP32)
+    case TGWDT_CPU_RESET:
+      reset_reason = "Timer Group Reset CPU";
+      break;
+#elif defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3)
+    case TG0WDT_CPU_RESET:
+      reset_reason = "Timer Group 0 Reset CPU";
+      break;
+#endif
+#if defined(USE_ESP32_VARIANT_ESP32)
+    case SW_CPU_RESET:
+#elif defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3)
+    case RTC_SW_CPU_RESET:
+#endif
+      reset_reason = "Software Reset CPU";
+      break;
+    case RTCWDT_CPU_RESET:
+      reset_reason = "RTC Watch Dog Reset CPU";
+      break;
+#if defined(USE_ESP32_VARIANT_ESP32)
+    case EXT_CPU_RESET:
+      reset_reason = "External CPU Reset";
+      break;
+#endif
+    case RTCWDT_BROWN_OUT_RESET:
+      reset_reason = "Voltage Unstable Reset";
+      break;
+    case RTCWDT_RTC_RESET:
+      reset_reason = "RTC Watch Dog Reset Digital Core And RTC Module";
+      break;
+#if defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3)
+    case TG1WDT_CPU_RESET:
+      reset_reason = "Timer Group 1 Reset CPU";
+      break;
+    case SUPER_WDT_RESET:
+      reset_reason = "Super Watchdog Reset Digital Core And RTC Module";
+      break;
+    case GLITCH_RTC_RESET:
+      reset_reason = "Glitch Reset Digital Core And RTC Module";
+      break;
+    case EFUSE_RESET:
+      reset_reason = "eFuse Reset Digital Core";
+      break;
+#endif
+#if defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S3)
+    case USB_UART_CHIP_RESET:
+      reset_reason = "USB UART Reset Digital Core";
+      break;
+    case USB_JTAG_CHIP_RESET:
+      reset_reason = "USB JTAG Reset Digital Core";
+      break;
+    case POWER_GLITCH_RESET:
+      reset_reason = "Power Glitch Reset Digital Core And RTC Module";
+      break;
+#endif
+    default:
+      reset_reason = "Unknown Reset Reason";
+  }
+  ESP_LOGD(TAG, "Reset Reason: %s", reset_reason.c_str());
+  return reset_reason;
+}
+
+uint32_t DebugComponent::get_free_heap_() { return heap_caps_get_free_size(MALLOC_CAP_INTERNAL); }
+
+void DebugComponent::get_device_info_(std::string &device_info) {
+#if defined(USE_ARDUINO)
+  const char *flash_mode;
+  switch (ESP.getFlashChipMode()) {  // NOLINT(readability-static-accessed-through-instance)
+    case FM_QIO:
+      flash_mode = "QIO";
+      break;
+    case FM_QOUT:
+      flash_mode = "QOUT";
+      break;
+    case FM_DIO:
+      flash_mode = "DIO";
+      break;
+    case FM_DOUT:
+      flash_mode = "DOUT";
+      break;
+    case FM_FAST_READ:
+      flash_mode = "FAST_READ";
+      break;
+    case FM_SLOW_READ:
+      flash_mode = "SLOW_READ";
+      break;
+    default:
+      flash_mode = "UNKNOWN";
+  }
+  ESP_LOGD(TAG, "Flash Chip: Size=%ukB Speed=%uMHz Mode=%s",
+           ESP.getFlashChipSize() / 1024,                                                   // NOLINT
+           ESP.getFlashChipSpeed() / 1000000, flash_mode);                                  // NOLINT
+  device_info += "|Flash: " + to_string(ESP.getFlashChipSize() / 1024) +                    // NOLINT
+                 "kB Speed:" + to_string(ESP.getFlashChipSpeed() / 1000000) + "MHz Mode:";  // NOLINT
+  device_info += flash_mode;
+#endif
+
+  esp_chip_info_t info;
+  esp_chip_info(&info);
+  const char *model;
+#if defined(USE_ESP32_VARIANT_ESP32)
+  model = "ESP32";
+#elif defined(USE_ESP32_VARIANT_ESP32C3)
+  model = "ESP32-C3";
+#elif defined(USE_ESP32_VARIANT_ESP32C6)
+  model = "ESP32-C6";
+#elif defined(USE_ESP32_VARIANT_ESP32S2)
+  model = "ESP32-S2";
+#elif defined(USE_ESP32_VARIANT_ESP32S3)
+  model = "ESP32-S3";
+#elif defined(USE_ESP32_VARIANT_ESP32H2)
+  model = "ESP32-H2";
+#else
+  model = "UNKNOWN";
+#endif
+  std::string features;
+  if (info.features & CHIP_FEATURE_EMB_FLASH) {
+    features += "EMB_FLASH,";
+    info.features &= ~CHIP_FEATURE_EMB_FLASH;
+  }
+  if (info.features & CHIP_FEATURE_WIFI_BGN) {
+    features += "WIFI_BGN,";
+    info.features &= ~CHIP_FEATURE_WIFI_BGN;
+  }
+  if (info.features & CHIP_FEATURE_BLE) {
+    features += "BLE,";
+    info.features &= ~CHIP_FEATURE_BLE;
+  }
+  if (info.features & CHIP_FEATURE_BT) {
+    features += "BT,";
+    info.features &= ~CHIP_FEATURE_BT;
+  }
+  if (info.features & CHIP_FEATURE_EMB_PSRAM) {
+    features += "EMB_PSRAM,";
+    info.features &= ~CHIP_FEATURE_EMB_PSRAM;
+  }
+  if (info.features)
+    features += "Other:" + format_hex(info.features);
+  ESP_LOGD(TAG, "Chip: Model=%s, Features=%s Cores=%u, Revision=%u", model, features.c_str(), info.cores,
+           info.revision);
+  device_info += "|Chip: ";
+  device_info += model;
+  device_info += " Features:";
+  device_info += features;
+  device_info += " Cores:" + to_string(info.cores);
+  device_info += " Revision:" + to_string(info.revision);
+
+  ESP_LOGD(TAG, "ESP-IDF Version: %s", esp_get_idf_version());
+  device_info += "|ESP-IDF: ";
+  device_info += esp_get_idf_version();
+
+  std::string mac = get_mac_address_pretty();
+  ESP_LOGD(TAG, "EFuse MAC: %s", mac.c_str());
+  device_info += "|EFuse MAC: ";
+  device_info += mac;
+
+  device_info += "|Reset: ";
+  device_info += get_reset_reason_();
+
+  const char *wakeup_reason;
+  switch (rtc_get_wakeup_cause()) {
+    case NO_SLEEP:
+      wakeup_reason = "No Sleep";
+      break;
+    case EXT_EVENT0_TRIG:
+      wakeup_reason = "External Event 0";
+      break;
+    case EXT_EVENT1_TRIG:
+      wakeup_reason = "External Event 1";
+      break;
+    case GPIO_TRIG:
+      wakeup_reason = "GPIO";
+      break;
+    case TIMER_EXPIRE:
+      wakeup_reason = "Wakeup Timer";
+      break;
+    case SDIO_TRIG:
+      wakeup_reason = "SDIO";
+      break;
+    case MAC_TRIG:
+      wakeup_reason = "MAC";
+      break;
+    case UART0_TRIG:
+      wakeup_reason = "UART0";
+      break;
+    case UART1_TRIG:
+      wakeup_reason = "UART1";
+      break;
+    case TOUCH_TRIG:
+      wakeup_reason = "Touch";
+      break;
+    case SAR_TRIG:
+      wakeup_reason = "SAR";
+      break;
+    case BT_TRIG:
+      wakeup_reason = "BT";
+      break;
+    default:
+      wakeup_reason = "Unknown";
+  }
+  ESP_LOGD(TAG, "Wakeup Reason: %s", wakeup_reason);
+  device_info += "|Wakeup: ";
+  device_info += wakeup_reason;
+}
+
+void DebugComponent::update_platform_() {
+#ifdef USE_SENSOR
+  if (this->block_sensor_ != nullptr) {
+    this->block_sensor_->publish_state(heap_caps_get_largest_free_block(MALLOC_CAP_INTERNAL));
+  }
+  if (this->psram_sensor_ != nullptr) {
+    this->psram_sensor_->publish_state(heap_caps_get_free_size(MALLOC_CAP_SPIRAM));
+  }
+#endif
+}
+
+}  // namespace debug
+}  // namespace esphome
+#endif

esphome/components/debug/debug_esp8266.cpp

@@ -0,0 +1,94 @@
+#include "debug_component.h"
+#ifdef USE_ESP8266
+#include "esphome/core/log.h"
+#include <Esp.h>
+
+namespace esphome {
+namespace debug {
+
+static const char *const TAG = "debug";
+
+std::string DebugComponent::get_reset_reason_() {
+#if !defined(CLANG_TIDY)
+  return ESP.getResetReason().c_str();
+#else
+  return "";
+#endif
+}
+
+uint32_t DebugComponent::get_free_heap_() {
+  return ESP.getFreeHeap();  // NOLINT(readability-static-accessed-through-instance)
+}
+
+void DebugComponent::get_device_info_(std::string &device_info) {
+  const char *flash_mode;
+  switch (ESP.getFlashChipMode()) {  // NOLINT(readability-static-accessed-through-instance)
+    case FM_QIO:
+      flash_mode = "QIO";
+      break;
+    case FM_QOUT:
+      flash_mode = "QOUT";
+      break;
+    case FM_DIO:
+      flash_mode = "DIO";
+      break;
+    case FM_DOUT:
+      flash_mode = "DOUT";
+      break;
+    default:
+      flash_mode = "UNKNOWN";
+  }
+  ESP_LOGD(TAG, "Flash Chip: Size=%ukB Speed=%uMHz Mode=%s",
+           ESP.getFlashChipSize() / 1024,                                                   // NOLINT
+           ESP.getFlashChipSpeed() / 1000000, flash_mode);                                  // NOLINT
+  device_info += "|Flash: " + to_string(ESP.getFlashChipSize() / 1024) +                    // NOLINT
+                 "kB Speed:" + to_string(ESP.getFlashChipSpeed() / 1000000) + "MHz Mode:";  // NOLINT
+  device_info += flash_mode;
+
+#if !defined(CLANG_TIDY)
+  auto reset_reason = get_reset_reason_();
+  ESP_LOGD(TAG, "Chip ID: 0x%08X", ESP.getChipId());
+  ESP_LOGD(TAG, "SDK Version: %s", ESP.getSdkVersion());
+  ESP_LOGD(TAG, "Core Version: %s", ESP.getCoreVersion().c_str());
+  ESP_LOGD(TAG, "Boot Version=%u Mode=%u", ESP.getBootVersion(), ESP.getBootMode());
+  ESP_LOGD(TAG, "CPU Frequency: %u", ESP.getCpuFreqMHz());
+  ESP_LOGD(TAG, "Flash Chip ID=0x%08X", ESP.getFlashChipId());
+  ESP_LOGD(TAG, "Reset Reason: %s", reset_reason.c_str());
+  ESP_LOGD(TAG, "Reset Info: %s", ESP.getResetInfo().c_str());
+
+  device_info += "|Chip: 0x" + format_hex(ESP.getChipId());
+  device_info += "|SDK: ";
+  device_info += ESP.getSdkVersion();
+  device_info += "|Core: ";
+  device_info += ESP.getCoreVersion().c_str();
+  device_info += "|Boot: ";
+  device_info += to_string(ESP.getBootVersion());
+  device_info += "|Mode: " + to_string(ESP.getBootMode());
+  device_info += "|CPU: " + to_string(ESP.getCpuFreqMHz());
+  device_info += "|Flash: 0x" + format_hex(ESP.getFlashChipId());
+  device_info += "|Reset: ";
+  device_info += reset_reason;
+  device_info += "|";
+  device_info += ESP.getResetInfo().c_str();
+#endif
+}
+
+void DebugComponent::update_platform_() {
+#ifdef USE_SENSOR
+  if (this->block_sensor_ != nullptr) {
+    // NOLINTNEXTLINE(readability-static-accessed-through-instance)
+    this->block_sensor_->publish_state(ESP.getMaxFreeBlockSize());
+  }
+#if USE_ARDUINO_VERSION_CODE >= VERSION_CODE(2, 5, 2)
+  if (this->fragmentation_sensor_ != nullptr) {
+    // NOLINTNEXTLINE(readability-static-accessed-through-instance)
+    this->fragmentation_sensor_->publish_state(ESP.getHeapFragmentation());
+  }
+#endif
+
+#endif
+}
+
+}  // namespace debug
+}  // namespace esphome
+#endif

esphome/components/debug/debug_host.cpp

@@ -0,0 +1,18 @@
+#include "debug_component.h"
+#ifdef USE_HOST
+#include <climits>
+
+namespace esphome {
+namespace debug {
+
+std::string DebugComponent::get_reset_reason_() { return ""; }
+
+uint32_t DebugComponent::get_free_heap_() { return INT_MAX; }
+
+void DebugComponent::get_device_info_(std::string &device_info) {}
+
+void DebugComponent::update_platform_() {}
+
+}  // namespace debug
+}  // namespace esphome
+#endif

esphome/components/debug/debug_libretiny.cpp

@@ -0,0 +1,44 @@
+#include "debug_component.h"
+#ifdef USE_LIBRETINY
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace debug {
+
+static const char *const TAG = "debug";
+
+std::string DebugComponent::get_reset_reason_() { return lt_get_reboot_reason_name(lt_get_reboot_reason()); }
+
+uint32_t DebugComponent::get_free_heap_() { return lt_heap_get_free(); }
+
+void DebugComponent::get_device_info_(std::string &device_info) {
+  reset_reason = get_reset_reason_();
+  ESP_LOGD(TAG, "LibreTiny Version: %s", lt_get_version());
+  ESP_LOGD(TAG, "Chip: %s (%04x) @ %u MHz", lt_cpu_get_model_name(), lt_cpu_get_model(), lt_cpu_get_freq_mhz());
+  ESP_LOGD(TAG, "Chip ID: 0x%06X", lt_cpu_get_mac_id());
+  ESP_LOGD(TAG, "Board: %s", lt_get_board_code());
+  ESP_LOGD(TAG, "Flash: %u KiB / RAM: %u KiB", lt_flash_get_size() / 1024, lt_ram_get_size() / 1024);
+  ESP_LOGD(TAG, "Reset Reason: %s", reset_reason.c_str());
+
+  device_info += "|Version: ";
+  device_info += LT_BANNER_STR + 10;
+  device_info += "|Reset Reason: ";
+  device_info += reset_reason;
+  device_info += "|Chip Name: ";
+  device_info += lt_cpu_get_model_name();
+  device_info += "|Chip ID: 0x" + format_hex(lt_cpu_get_mac_id());
+  device_info += "|Flash: " + to_string(lt_flash_get_size() / 1024) + " KiB";
+  device_info += "|RAM: " + to_string(lt_ram_get_size() / 1024) + " KiB";
+}
+
+void DebugComponent::update_platform_() {
+#ifdef USE_SENSOR
+  if (this->block_sensor_ != nullptr) {
+    this->block_sensor_->publish_state(lt_heap_get_max_alloc());
+  }
+#endif
+}
+
+}  // namespace debug
+}  // namespace esphome
+#endif

esphome/components/debug/debug_rp2040.cpp

@@ -0,0 +1,23 @@
+#include "debug_component.h"
+#ifdef USE_RP2040
+#include "esphome/core/log.h"
+#include <Arduino.h>
+namespace esphome {
+namespace debug {
+
+static const char *const TAG = "debug";
+
+std::string DebugComponent::get_reset_reason_() { return ""; }
+
+uint32_t DebugComponent::get_free_heap_() { return rp2040.getFreeHeap(); }
+
+void DebugComponent::get_device_info_(std::string &device_info) {
+  ESP_LOGD(TAG, "CPU Frequency: %u", rp2040.f_cpu());
+  device_info += "CPU Frequency: " + to_string(rp2040.f_cpu());
+}
+
+void DebugComponent::update_platform_() {}
+
+}  // namespace debug
+}  // namespace esphome
+#endif

esphome/components/display_menu_base/__init__.py

@@ -23,7 +23,6 @@ CODEOWNERS = ["@numo68"]
 
 display_menu_base_ns = cg.esphome_ns.namespace("display_menu_base")
 
-CONF_DISPLAY_ID = "display_id"
 
 CONF_ROTARY = "rotary"
 CONF_JOYSTICK = "joystick"

esphome/components/esp32/__init__.py

@@ -227,7 +227,7 @@ ARDUINO_PLATFORM_VERSION = cv.Version(5, 4, 0)
 # The default/recommended esp-idf framework version
 #  - https://github.com/espressif/esp-idf/releases
 #  - https://api.registry.platformio.org/v3/packages/platformio/tool/framework-espidf
-RECOMMENDED_ESP_IDF_FRAMEWORK_VERSION = cv.Version(4, 4, 6)
+RECOMMENDED_ESP_IDF_FRAMEWORK_VERSION = cv.Version(4, 4, 7)
 # The platformio/espressif32 version to use for esp-idf frameworks
 #  - https://github.com/platformio/platform-espressif32/releases
 #  - https://api.registry.platformio.org/v3/packages/platformio/platform/espressif32

esphome/components/esp32_ble_tracker/esp32_ble_tracker.cpp

@@ -25,6 +25,9 @@
 #include <esp32-hal-bt.h>
 #endif
 
+#define MBEDTLS_AES_ALT
+#include <aes_alt.h>
+
 // bt_trace.h
 #undef TAG
 
@@ -692,6 +695,39 @@ void ESP32BLETracker::print_bt_device_info(const ESPBTDevice &device) {
   }
 }
 
+bool ESPBTDevice::resolve_irk(const uint8_t *irk) const {
+  uint8_t ecb_key[16];
+  uint8_t ecb_plaintext[16];
+  uint8_t ecb_ciphertext[16];
+
+  uint64_t addr64 = esp32_ble::ble_addr_to_uint64(this->address_);
+
+  memcpy(&ecb_key, irk, 16);
+  memset(&ecb_plaintext, 0, 16);
+
+  ecb_plaintext[13] = (addr64 >> 40) & 0xff;
+  ecb_plaintext[14] = (addr64 >> 32) & 0xff;
+  ecb_plaintext[15] = (addr64 >> 24) & 0xff;
+
+  mbedtls_aes_context ctx = {0, 0, {0}};
+  mbedtls_aes_init(&ctx);
+
+  if (mbedtls_aes_setkey_enc(&ctx, ecb_key, 128) != 0) {
+    mbedtls_aes_free(&ctx);
+    return false;
+  }
+
+  if (mbedtls_aes_crypt_ecb(&ctx, ESP_AES_ENCRYPT, ecb_plaintext, ecb_ciphertext) != 0) {
+    mbedtls_aes_free(&ctx);
+    return false;
+  }
+
+  mbedtls_aes_free(&ctx);
+
+  return ecb_ciphertext[15] == (addr64 & 0xff) && ecb_ciphertext[14] == ((addr64 >> 8) & 0xff) &&
+         ecb_ciphertext[13] == ((addr64 >> 16) & 0xff);
+}
+
 }  // namespace esp32_ble_tracker
 }  // namespace esphome
 

esphome/components/esp32_ble_tracker/esp32_ble_tracker.h

@@ -86,6 +86,8 @@ class ESPBTDevice {
 
   const esp_ble_gap_cb_param_t::ble_scan_result_evt_param &get_scan_result() const { return scan_result_; }
 
+  bool resolve_irk(const uint8_t *irk) const;
+
   optional<ESPBLEiBeacon> get_ibeacon() const {
     for (auto &it : this->manufacturer_datas_) {
       auto res = ESPBLEiBeacon::from_manufacturer_data(it);

esphome/components/ethernet/ethernet_component.cpp

@@ -1,12 +1,12 @@
 #include "ethernet_component.h"
+#include "esphome/core/application.h"
 #include "esphome/core/log.h"
 #include "esphome/core/util.h"
-#include "esphome/core/application.h"
 
 #ifdef USE_ESP32
 
-#include <cinttypes>
 #include <lwip/dns.h>
+#include <cinttypes>
 #include "esp_event.h"
 
 #ifdef USE_ETHERNET_SPI
@@ -184,6 +184,10 @@ void EthernetComponent::setup() {
     // KSZ8081RNA default is incorrect. It expects a 25MHz clock instead of the 50MHz we provide.
     this->ksz8081_set_clock_reference_(mac);
   }
+  if (this->type_ == ETHERNET_TYPE_RTL8201 && this->clk_mode_ == EMAC_CLK_EXT_IN) {
+    // Change in default behavior of RTL8201FI may require register setting to enable external clock
+    this->rtl8201_set_rmii_mode_(mac);
+  }
 #endif
 
   // use ESP internal eth mac
@@ -554,9 +558,10 @@ bool EthernetComponent::powerdown() {
 }
 
 #ifndef USE_ETHERNET_SPI
-void EthernetComponent::ksz8081_set_clock_reference_(esp_eth_mac_t *mac) {
-#define KSZ80XX_PC2R_REG_ADDR (0x1F)
 
+constexpr uint8_t KSZ80XX_PC2R_REG_ADDR = 0x1F;
+
+void EthernetComponent::ksz8081_set_clock_reference_(esp_eth_mac_t *mac) {
   esp_err_t err;
 
   uint32_t phy_control_2;
@@ -581,9 +586,47 @@ void EthernetComponent::ksz8081_set_clock_reference_(esp_eth_mac_t *mac) {
     ESPHL_ERROR_CHECK(err, "Read PHY Control 2 failed");
     ESP_LOGVV(TAG, "KSZ8081 PHY Control 2: %s", format_hex_pretty((u_int8_t *) &phy_control_2, 2).c_str());
   }
-
-#undef KSZ80XX_PC2R_REG_ADDR
 }
+constexpr uint8_t RTL8201_RMSR_REG_ADDR = 0x10;
+void EthernetComponent::rtl8201_set_rmii_mode_(esp_eth_mac_t *mac) {
+  esp_err_t err;
+  uint32_t phy_rmii_mode;
+  err = mac->write_phy_reg(mac, this->phy_addr_, 0x1f, 0x07);
+  ESPHL_ERROR_CHECK(err, "Setting Page 7 failed");
+
+  /*
+   * RTL8201 RMII Mode Setting Register (RMSR)
+   * Page 7 Register 16
+   *
+   * bit 0      Reserved            0
+   * bit 1      Rg_rmii_rxdsel      1 (default)
+   * bit 2      Rg_rmii_rxdv_sel:   0 (default)
+   * bit 3      RMII Mode:          1 (RMII Mode)
+   * bit 4~7    Rg_rmii_rx_offset:  1111 (default)
+   * bit 8~11   Rg_rmii_tx_offset:  1111 (default)
+   * bit 12     Rg_rmii_clkdir:     1 (Input)
+   * bit 13~15  Reserved            000
+   *
+   * Binary: 0001 1111 1111 1010
+   * Hex: 0x1FFA
+   *
+   */
+
+  err = mac->read_phy_reg(mac, this->phy_addr_, RTL8201_RMSR_REG_ADDR, &(phy_rmii_mode));
+  ESPHL_ERROR_CHECK(err, "Read PHY RMSR Register failed");
+  ESP_LOGV(TAG, "Hardware default RTL8201 RMII Mode Register is: 0x%04X", phy_rmii_mode);
+
+  err = mac->write_phy_reg(mac, this->phy_addr_, RTL8201_RMSR_REG_ADDR, 0x1FFA);
+  ESPHL_ERROR_CHECK(err, "Setting Register 16 RMII Mode Setting failed");
+
+  err = mac->read_phy_reg(mac, this->phy_addr_, RTL8201_RMSR_REG_ADDR, &(phy_rmii_mode));
+  ESPHL_ERROR_CHECK(err, "Read PHY RMSR Register failed");
+  ESP_LOGV(TAG, "Setting RTL8201 RMII Mode Register to: 0x%04X", phy_rmii_mode);
+
+  err = mac->write_phy_reg(mac, this->phy_addr_, 0x1f, 0x0);
+  ESPHL_ERROR_CHECK(err, "Setting Page 0 failed");
+}
+
 #endif
 
 }  // namespace ethernet

esphome/components/ethernet/ethernet_component.h

@@ -86,6 +86,8 @@ class EthernetComponent : public Component {
   void dump_connect_params_();
   /// @brief Set `RMII Reference Clock Select` bit for KSZ8081.
   void ksz8081_set_clock_reference_(esp_eth_mac_t *mac);
+  /// @brief Set `RMII Mode Setting Register` for RTL8201.
+  void rtl8201_set_rmii_mode_(esp_eth_mac_t *mac);
 
   std::string use_address_;
 #ifdef USE_ETHERNET_SPI

esphome/components/external_components/__init__.py

@@ -49,7 +49,16 @@ def _process_git_config(config: dict, refresh) -> str:
         password=config.get(CONF_PASSWORD),
     )
 
-    if (repo_dir / "esphome" / "components").is_dir():
+    if path := config.get(CONF_PATH):
+        if (repo_dir / path).is_dir():
+            components_dir = repo_dir / path
+        else:
+            raise cv.Invalid(
+                "Could not find components folder for source. Please check the source contains a '"
+                + path
+                + "' folder"
+            )
+    elif (repo_dir / "esphome" / "components").is_dir():
         components_dir = repo_dir / "esphome" / "components"
     elif (repo_dir / "components").is_dir():
         components_dir = repo_dir / "components"

esphome/components/gdk101/__init__.py

@@ -0,0 +1,32 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import i2c
+from esphome.const import CONF_ID
+
+CODEOWNERS = ["@Szewcson"]
+
+DEPENDENCIES = ["i2c"]
+MULTI_CONF = True
+
+CONF_GDK101_ID = "gdk101_id"
+
+gdk101_ns = cg.esphome_ns.namespace("gdk101")
+GDK101Component = gdk101_ns.class_(
+    "GDK101Component", cg.PollingComponent, i2c.I2CDevice
+)
+
+CONFIG_SCHEMA = (
+    cv.Schema(
+        {
+            cv.GenerateID(): cv.declare_id(GDK101Component),
+        }
+    )
+    .extend(cv.polling_component_schema("60s"))
+    .extend(i2c.i2c_device_schema(0x18))
+)
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+    await i2c.register_i2c_device(var, config)

esphome/components/gdk101/binary_sensor.py

@@ -0,0 +1,29 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import binary_sensor
+from esphome.const import (
+    CONF_VIBRATIONS,
+    DEVICE_CLASS_VIBRATION,
+    ENTITY_CATEGORY_DIAGNOSTIC,
+    ICON_VIBRATE,
+)
+from . import CONF_GDK101_ID, GDK101Component
+
+DEPENDENCIES = ["gdk101"]
+
+CONFIG_SCHEMA = cv.Schema(
+    {
+        cv.GenerateID(CONF_GDK101_ID): cv.use_id(GDK101Component),
+        cv.Required(CONF_VIBRATIONS): binary_sensor.binary_sensor_schema(
+            device_class=DEVICE_CLASS_VIBRATION,
+            entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+            icon=ICON_VIBRATE,
+        ),
+    }
+)
+
+
+async def to_code(config):
+    hub = await cg.get_variable(config[CONF_GDK101_ID])
+    var = await binary_sensor.new_binary_sensor(config[CONF_VIBRATIONS])
+    cg.add(hub.set_vibration_binary_sensor(var))

esphome/components/gdk101/gdk101.cpp

@@ -0,0 +1,189 @@
+#include "gdk101.h"
+#include "esphome/core/hal.h"
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace gdk101 {
+
+static const char *const TAG = "gdk101";
+static const uint8_t NUMBER_OF_READ_RETRIES = 5;
+
+void GDK101Component::update() {
+  uint8_t data[2];
+  if (!this->read_dose_1m_(data)) {
+    this->status_set_warning("Failed to read dose 1m");
+    return;
+  }
+
+  if (!this->read_dose_10m_(data)) {
+    this->status_set_warning("Failed to read dose 10m");
+    return;
+  }
+
+  if (!this->read_status_(data)) {
+    this->status_set_warning("Failed to read status");
+    return;
+  }
+
+  if (!this->read_measurement_duration_(data)) {
+    this->status_set_warning("Failed to read measurement duration");
+    return;
+  }
+  this->status_clear_warning();
+}
+
+void GDK101Component::setup() {
+  uint8_t data[2];
+  ESP_LOGCONFIG(TAG, "Setting up GDK101...");
+  // first, reset the sensor
+  if (!this->reset_sensor_(data)) {
+    this->status_set_error("Reset failed!");
+    this->mark_failed();
+    return;
+  }
+  // sensor should acknowledge success of the reset procedure
+  if (data[0] != 1) {
+    this->status_set_error("Reset not acknowledged!");
+    this->mark_failed();
+    return;
+  }
+  delay(10);
+  // read firmware version
+  if (!this->read_fw_version_(data)) {
+    this->status_set_error("Failed to read firmware version");
+    this->mark_failed();
+    return;
+  }
+}
+
+void GDK101Component::dump_config() {
+  ESP_LOGCONFIG(TAG, "GDK101:");
+  LOG_I2C_DEVICE(this);
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "Communication with GDK101 failed!");
+  }
+#ifdef USE_SENSOR
+  LOG_SENSOR("  ", "Firmware Version", this->fw_version_sensor_);
+  LOG_SENSOR("  ", "Average Radaition Dose per 1 minute", this->rad_1m_sensor_);
+  LOG_SENSOR("  ", "Average Radaition Dose per 10 minutes", this->rad_10m_sensor_);
+  LOG_SENSOR("  ", "Status", this->status_sensor_);
+  LOG_SENSOR("  ", "Measurement Duration", this->measurement_duration_sensor_);
+#endif  // USE_SENSOR
+
+#ifdef USE_BINARY_SENSOR
+  LOG_BINARY_SENSOR("  ", "Vibration Status", this->vibration_binary_sensor_);
+#endif  // USE_BINARY_SENSOR
+}
+
+float GDK101Component::get_setup_priority() const { return setup_priority::DATA; }
+
+bool GDK101Component::read_bytes_with_retry_(uint8_t a_register, uint8_t *data, uint8_t len) {
+  uint8_t retry = NUMBER_OF_READ_RETRIES;
+  bool status = false;
+  while (!status && retry) {
+    status = this->read_bytes(a_register, data, len);
+    retry--;
+  }
+  return status;
+}
+
+bool GDK101Component::reset_sensor_(uint8_t *data) {
+  // It looks like reset is not so well designed in that sensor
+  // After sending reset command it looks that sensor start performing reset and is unresponsible during read
+  // after a while we can send another reset command and read "0x01" as confirmation
+  // Documentation not going in to such details unfortunately
+  if (!this->read_bytes_with_retry_(GDK101_REG_RESET, data, 2)) {
+    ESP_LOGE(TAG, "Updating GDK101 failed!");
+    return false;
+  }
+
+  return true;
+}
+
+bool GDK101Component::read_dose_1m_(uint8_t *data) {
+#ifdef USE_SENSOR
+  if (this->rad_1m_sensor_ != nullptr) {
+    if (!this->read_bytes(GDK101_REG_READ_1MIN_AVG, data, 2)) {
+      ESP_LOGE(TAG, "Updating GDK101 failed!");
+      return false;
+    }
+
+    const float dose = data[0] + (data[1] / 100.0f);
+
+    this->rad_1m_sensor_->publish_state(dose);
+  }
+#endif  // USE_SENSOR
+  return true;
+}
+
+bool GDK101Component::read_dose_10m_(uint8_t *data) {
+#ifdef USE_SENSOR
+  if (this->rad_10m_sensor_ != nullptr) {
+    if (!this->read_bytes(GDK101_REG_READ_10MIN_AVG, data, 2)) {
+      ESP_LOGE(TAG, "Updating GDK101 failed!");
+      return false;
+    }
+
+    const float dose = data[0] + (data[1] / 100.0f);
+
+    this->rad_10m_sensor_->publish_state(dose);
+  }
+#endif  // USE_SENSOR
+  return true;
+}
+
+bool GDK101Component::read_status_(uint8_t *data) {
+  if (!this->read_bytes(GDK101_REG_READ_STATUS, data, 2)) {
+    ESP_LOGE(TAG, "Updating GDK101 failed!");
+    return false;
+  }
+
+#ifdef USE_SENSOR
+  if (this->status_sensor_ != nullptr) {
+    this->status_sensor_->publish_state(data[0]);
+  }
+#endif  // USE_SENSOR
+
+#ifdef USE_BINARY_SENSOR
+  if (this->vibration_binary_sensor_ != nullptr) {
+    this->vibration_binary_sensor_->publish_state(data[1]);
+  }
+#endif  // USE_BINARY_SENSOR
+
+  return true;
+}
+
+bool GDK101Component::read_fw_version_(uint8_t *data) {
+#ifdef USE_SENSOR
+  if (this->fw_version_sensor_ != nullptr) {
+    if (!this->read_bytes(GDK101_REG_READ_FIRMWARE, data, 2)) {
+      ESP_LOGE(TAG, "Updating GDK101 failed!");
+      return false;
+    }
+
+    const float fw_version = data[0] + (data[1] / 10.0f);
+
+    this->fw_version_sensor_->publish_state(fw_version);
+  }
+#endif  // USE_SENSOR
+  return true;
+}
+
+bool GDK101Component::read_measurement_duration_(uint8_t *data) {
+#ifdef USE_SENSOR
+  if (this->measurement_duration_sensor_ != nullptr) {
+    if (!this->read_bytes(GDK101_REG_READ_MEASURING_TIME, data, 2)) {
+      ESP_LOGE(TAG, "Updating GDK101 failed!");
+      return false;
+    }
+
+    const float meas_time = (data[0] * 60) + data[1];
+
+    this->measurement_duration_sensor_->publish_state(meas_time);
+  }
+#endif  // USE_SENSOR
+  return true;
+}
+
+}  // namespace gdk101
+}  // namespace esphome

esphome/components/gdk101/gdk101.h

@@ -0,0 +1,52 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/core/defines.h"
+#ifdef USE_SENSOR
+#include "esphome/components/sensor/sensor.h"
+#endif  // USE_SENSOR
+#ifdef USE_BINARY_SENSOR
+#include "esphome/components/binary_sensor/binary_sensor.h"
+#endif  // USE_BINARY_SENSOR
+#include "esphome/components/i2c/i2c.h"
+
+namespace esphome {
+namespace gdk101 {
+
+static const uint8_t GDK101_REG_READ_FIRMWARE = 0xB4;        // Firmware version
+static const uint8_t GDK101_REG_RESET = 0xA0;                // Reset register - reading its value triggers reset
+static const uint8_t GDK101_REG_READ_STATUS = 0xB0;          // Status register
+static const uint8_t GDK101_REG_READ_MEASURING_TIME = 0xB1;  // Mesuring time
+static const uint8_t GDK101_REG_READ_10MIN_AVG = 0xB2;       // Average radiation dose per 10 min
+static const uint8_t GDK101_REG_READ_1MIN_AVG = 0xB3;        // Average radiation dose per 1 min
+
+class GDK101Component : public PollingComponent, public i2c::I2CDevice {
+#ifdef USE_SENSOR
+  SUB_SENSOR(rad_1m)
+  SUB_SENSOR(rad_10m)
+  SUB_SENSOR(status)
+  SUB_SENSOR(fw_version)
+  SUB_SENSOR(measurement_duration)
+#endif  // USE_SENSOR
+#ifdef USE_BINARY_SENSOR
+  SUB_BINARY_SENSOR(vibration)
+#endif  // USE_BINARY_SENSOR
+
+ public:
+  void setup() override;
+  void dump_config() override;
+  float get_setup_priority() const override;
+  void update() override;
+
+ protected:
+  bool read_bytes_with_retry_(uint8_t a_register, uint8_t *data, uint8_t len);
+  bool reset_sensor_(uint8_t *data);
+  bool read_dose_1m_(uint8_t *data);
+  bool read_dose_10m_(uint8_t *data);
+  bool read_status_(uint8_t *data);
+  bool read_fw_version_(uint8_t *data);
+  bool read_measurement_duration_(uint8_t *data);
+};
+
+}  // namespace gdk101
+}  // namespace esphome

esphome/components/gdk101/sensor.py

@@ -0,0 +1,83 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import sensor
+from esphome.const import (
+    DEVICE_CLASS_DURATION,
+    DEVICE_CLASS_EMPTY,
+    ENTITY_CATEGORY_DIAGNOSTIC,
+    CONF_MEASUREMENT_DURATION,
+    CONF_STATUS,
+    CONF_VERSION,
+    ICON_RADIOACTIVE,
+    ICON_TIMER,
+    STATE_CLASS_MEASUREMENT,
+    STATE_CLASS_TOTAL_INCREASING,
+    UNIT_MICROSILVERTS_PER_HOUR,
+    UNIT_SECOND,
+)
+from . import CONF_GDK101_ID, GDK101Component
+
+CONF_RADIATION_DOSE_PER_1M = "radiation_dose_per_1m"
+CONF_RADIATION_DOSE_PER_10M = "radiation_dose_per_10m"
+
+DEPENDENCIES = ["gdk101"]
+
+CONFIG_SCHEMA = cv.Schema(
+    {
+        cv.GenerateID(CONF_GDK101_ID): cv.use_id(GDK101Component),
+        cv.Optional(CONF_RADIATION_DOSE_PER_1M): sensor.sensor_schema(
+            icon=ICON_RADIOACTIVE,
+            unit_of_measurement=UNIT_MICROSILVERTS_PER_HOUR,
+            accuracy_decimals=2,
+            device_class=DEVICE_CLASS_EMPTY,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ),
+        cv.Optional(CONF_RADIATION_DOSE_PER_10M): sensor.sensor_schema(
+            icon=ICON_RADIOACTIVE,
+            unit_of_measurement=UNIT_MICROSILVERTS_PER_HOUR,
+            accuracy_decimals=2,
+            device_class=DEVICE_CLASS_EMPTY,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ),
+        cv.Optional(CONF_VERSION): sensor.sensor_schema(
+            entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+            accuracy_decimals=1,
+        ),
+        cv.Optional(CONF_STATUS): sensor.sensor_schema(
+            entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+            accuracy_decimals=0,
+        ),
+        cv.Optional(CONF_MEASUREMENT_DURATION): sensor.sensor_schema(
+            unit_of_measurement=UNIT_SECOND,
+            icon=ICON_TIMER,
+            accuracy_decimals=0,
+            state_class=STATE_CLASS_TOTAL_INCREASING,
+            device_class=DEVICE_CLASS_DURATION,
+            entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+        ),
+    }
+)
+
+
+async def to_code(config):
+    hub = await cg.get_variable(config[CONF_GDK101_ID])
+
+    if radiation_dose_per_1m := config.get(CONF_RADIATION_DOSE_PER_1M):
+        sens = await sensor.new_sensor(radiation_dose_per_1m)
+        cg.add(hub.set_rad_1m_sensor(sens))
+
+    if radiation_dose_per_10m := config.get(CONF_RADIATION_DOSE_PER_10M):
+        sens = await sensor.new_sensor(radiation_dose_per_10m)
+        cg.add(hub.set_rad_10m_sensor(sens))
+
+    if version_config := config.get(CONF_VERSION):
+        sens = await sensor.new_sensor(version_config)
+        cg.add(hub.set_fw_version_sensor(sens))
+
+    if status_config := config.get(CONF_STATUS):
+        sens = await sensor.new_sensor(status_config)
+        cg.add(hub.set_status_sensor(sens))
+
+    if measurement_duration_config := config.get(CONF_MEASUREMENT_DURATION):
+        sens = await sensor.new_sensor(measurement_duration_config)
+        cg.add(hub.set_measurement_duration_sensor(sens))

esphome/components/hmc5883l/hmc5883l.cpp

@@ -1,5 +1,6 @@
 #include "hmc5883l.h"
 #include "esphome/core/log.h"
+#include "esphome/core/application.h"
 
 namespace esphome {
 namespace hmc5883l {
@@ -31,6 +32,10 @@ void HMC5883LComponent::setup() {
     return;
   }
 
+  if (this->get_update_interval() < App.get_loop_interval()) {
+    high_freq_.start();
+  }
+
   if (id[0] != 0x48 || id[1] != 0x34 || id[2] != 0x33) {
     this->error_code_ = ID_REGISTERS;
     this->mark_failed();

esphome/components/hmc5883l/hmc5883l.h

@@ -63,6 +63,7 @@ class HMC5883LComponent : public PollingComponent, public i2c::I2CDevice {
     COMMUNICATION_FAILED,
     ID_REGISTERS,
   } error_code_;
+  HighFrequencyLoopRequester high_freq_;
 };
 
 }  // namespace hmc5883l

esphome/components/lcd_menu/__init__.py

@@ -3,6 +3,7 @@ import esphome.config_validation as cv
 from esphome.const import (
     CONF_ID,
     CONF_DIMENSIONS,
+    CONF_DISPLAY_ID,
 )
 from esphome.core.entity_helpers import inherit_property_from
 from esphome.components import lcd_base
@@ -18,8 +19,6 @@ AUTO_LOAD = ["display_menu_base"]
 
 lcd_menu_ns = cg.esphome_ns.namespace("lcd_menu")
 
-CONF_DISPLAY_ID = "display_id"
-
 CONF_MARK_SELECTED = "mark_selected"
 CONF_MARK_EDITING = "mark_editing"
 CONF_MARK_SUBMENU = "mark_submenu"

esphome/components/ltr390/ltr390.cpp

@@ -8,6 +8,9 @@ namespace ltr390 {
 
 static const char *const TAG = "ltr390";
 
+static const uint8_t LTR390_WAKEUP_TIME = 10;
+static const uint8_t LTR390_SETTLE_TIME = 5;
+
 static const uint8_t LTR390_MAIN_CTRL = 0x00;
 static const uint8_t LTR390_MEAS_RATE = 0x04;
 static const uint8_t LTR390_GAIN = 0x05;
@@ -101,21 +104,27 @@ void LTR390Component::read_mode_(int mode_index) {
 
   std::bitset<8> ctrl = this->reg(LTR390_MAIN_CTRL).get();
   ctrl[LTR390_CTRL_MODE] = mode;
+  ctrl[LTR390_CTRL_EN] = true;
   this->reg(LTR390_MAIN_CTRL) = ctrl.to_ulong();
 
   // After the sensor integration time do the following
-  this->set_timeout(((uint32_t) RESOLUTIONVALUE[this->res_]) * 100, [this, mode_index]() {
+  this->set_timeout(((uint32_t) RESOLUTIONVALUE[this->res_]) * 100 + LTR390_WAKEUP_TIME + LTR390_SETTLE_TIME,
-    // Read from the sensor
+                    [this, mode_index]() {
-    std::get<1>(this->mode_funcs_[mode_index])();
+                      // Read from the sensor
+                      std::get<1>(this->mode_funcs_[mode_index])();
 
-    // If there are more modes to read then begin the next
+                      // If there are more modes to read then begin the next
-    // otherwise stop
+                      // otherwise stop
-    if (mode_index + 1 < (int) this->mode_funcs_.size()) {
+                      if (mode_index + 1 < (int) this->mode_funcs_.size()) {
-      this->read_mode_(mode_index + 1);
+                        this->read_mode_(mode_index + 1);
-    } else {
+                      } else {
-      this->reading_ = false;
+                        // put sensor in standby
-    }
+                        std::bitset<8> ctrl = this->reg(LTR390_MAIN_CTRL).get();
-  });
+                        ctrl[LTR390_CTRL_EN] = false;
+                        this->reg(LTR390_MAIN_CTRL) = ctrl.to_ulong();
+                        this->reading_ = false;
+                      }
+                    });
 }
 
 void LTR390Component::setup() {

esphome/components/matrix_keypad/binary_sensor/__init__.py

@@ -1,12 +1,9 @@
 import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome.components import binary_sensor
-from esphome.const import CONF_ID, CONF_KEY
+from esphome.const import CONF_ID, CONF_KEY, CONF_ROW, CONF_COL
 from .. import MatrixKeypad, matrix_keypad_ns, CONF_KEYPAD_ID
 
-CONF_ROW = "row"
-CONF_COL = "col"
-
 DEPENDENCIES = ["matrix_keypad"]
 
 MatrixKeypadBinarySensor = matrix_keypad_ns.class_(

esphome/components/media_player/__init__.py

@@ -3,7 +3,13 @@ import esphome.config_validation as cv
 import esphome.codegen as cg
 
 from esphome.automation import maybe_simple_id
-from esphome.const import CONF_ID, CONF_ON_STATE, CONF_TRIGGER_ID, CONF_VOLUME
+from esphome.const import (
+    CONF_ID,
+    CONF_ON_STATE,
+    CONF_TRIGGER_ID,
+    CONF_VOLUME,
+    CONF_ON_IDLE,
+)
 from esphome.core import CORE
 from esphome.coroutine import coroutine_with_priority
 from esphome.cpp_helpers import setup_entity
@@ -43,7 +49,6 @@ VolumeSetAction = media_player_ns.class_(
 )
 
 
-CONF_ON_IDLE = "on_idle"
 CONF_ON_PLAY = "on_play"
 CONF_ON_PAUSE = "on_pause"
 CONF_MEDIA_URL = "media_url"

esphome/components/nextion/nextion.h

@@ -12,7 +12,7 @@
 #include "esphome/components/display/display_color_utils.h"
 
 #ifdef USE_NEXTION_TFT_UPLOAD
-#ifdef ARDUINO
+#ifdef USE_ARDUINO
 #ifdef USE_ESP32
 #include <HTTPClient.h>
 #endif  // USE_ESP32
@@ -22,7 +22,7 @@
 #endif  // USE_ESP8266
 #elif defined(USE_ESP_IDF)
 #include <esp_http_client.h>
-#endif  // ARDUINO vs ESP-IDF
+#endif  // ARDUINO vs USE_ESP_IDF
 #endif  // USE_NEXTION_TFT_UPLOAD
 
 namespace esphome {
@@ -987,7 +987,7 @@ class Nextion : public NextionBase, public PollingComponent, public uart::UARTDe
 
 #ifdef USE_NEXTION_TFT_UPLOAD
   /**
-   * Set the tft file URL. https seems problematic with arduino..
+   * Set the tft file URL. https seems problematic with Arduino..
    */
   void set_tft_url(const std::string &tft_url) { this->tft_url_ = tft_url; }
 
@@ -1190,7 +1190,7 @@ class Nextion : public NextionBase, public PollingComponent, public uart::UARTDe
   uint32_t original_baud_rate_ = 0;
   bool upload_first_chunk_sent_ = false;
 
-#ifdef ARDUINO
+#ifdef USE_ARDUINO
   /**
    * will request chunk_size chunks from the web server
    * and send each to the nextion
@@ -1208,7 +1208,7 @@ class Nextion : public NextionBase, public PollingComponent, public uart::UARTDe
    * @return position of last byte transferred, -1 for failure.
    */
   int upload_by_chunks_(esp_http_client_handle_t http_client, uint32_t &range_start);
-#endif  // ARDUINO vs USE_ESP_IDF
+#endif  // USE_ARDUINO vs USE_ESP_IDF
 
   /**
    * Ends the upload process, restart Nextion and, if successful,

esphome/components/nextion/nextion_upload_arduino.cpp

@@ -1,7 +1,7 @@
 #include "nextion.h"
 
 #ifdef USE_NEXTION_TFT_UPLOAD
-#ifdef ARDUINO
+#ifdef USE_ARDUINO
 
 #include "esphome/core/application.h"
 #include "esphome/core/defines.h"
@@ -383,5 +383,5 @@ WiFiClient *Nextion::get_wifi_client_() {
 }  // namespace nextion
 }  // namespace esphome
 
-#endif  // ARDUINO
+#endif  // USE_ARDUINO
 #endif  // USE_NEXTION_TFT_UPLOAD

esphome/components/pulse_meter/pulse_filter.md

@@ -0,0 +1,61 @@
+# PULSE Filter
+
+The PULSE filter filters noisy pulses by ensuring that the pulse is in a steady state for at least `filter_length` before allowing the state change to occur.
+It counts the pulse time from the rising edge that stayed high for at least `filter_length`, so noise before this won't be considered the start of a pulse.
+It then must see a low pulse that is at least `filter_length` long before a subsequent rising edge is considered a new pulse start.
+
+It's operation should be the same as delayed_on_off from the Binary Sensor component.
+
+There are three moving parts in the algorithm that are used to determine the state of the filter.
+
+1. The time between interrupts, measured from the last interrupt, this is compared to filter_length to determine if the pulse has been in a steady state for long enough.
+2. A latch variable that is set true when a high pulse is long enough to be considered a valid pulse and is reset when a low pulse is long enough to allow for another pulse to begin.
+3. The previous and current state of the pin used to determine if the pulse is rising or falling.
+
+## Ghost interrupts
+
+Observations from the devices show that even though the interrupt should trigger on every rising or falling edge, sometimes interrupts show the same state twice in a row.
+The current theory is an interprets occurs, but then the pin changing back faster than the ISR can be called and read the value, meaning it sees the same state twice in a row.
+The algorithm interprets these when it sees them as two edges in a row, so will potentially reset a pulse if
+
+## Pulse Filter Truth table
+
+The following is all of the possible states of the filter along with the new inputs.
+It also shows a diagram of a possible series of interrupts that would cause the filter to enter that state.
+It then has the action that the filter should take and a description of what is happening.
+
+Diagram legend
+
+- `/` rising edge
+- `\` falling edge
+- `‾` high steady state of at least `filter_length`
+- `_` low steady state of at least `filter_length`
+- `¦` ghost interrupt
+
+| Length | Latch | From | To  | Diagram | Action             | Description                                                                                          |
+| ------ | ----- | ---- | --- | ------- | ------------------ | ---------------------------------------------------------------------------------------------------- |
+| T      | 1     | 0    | 0   | `‾\_¦ ` | Reset              | `filter_length` low, reset the latch                                                                 |
+| T      | 1     | 0    | 1   | `‾\_/ ` | Reset, Rising Edge | `filter_length` low, reset the latch, rising edge could be a new pulse                               |
+| T      | 1     | 1    | 0   | `‾\/‾\` | -                  | Already latched from a previous `filter_length` high                                                 |
+| T      | 1     | 1    | 1   | `‾\/‾¦` | -                  | Already latched from a previous `filter_length` high                                                 |
+| T      | 0     | 1    | 1   | `_/‾¦`  | Set and Publish    | `filter_length` high, set the latch and publish the pulse                                            |
+| T      | 0     | 1    | 0   | `_/‾\ ` | Set and Publish    | `filter_length` high, set the latch and publish the pulse                                            |
+| T      | 0     | 0    | 1   | `_/\_/` | Rising Edge        | Already unlatched from a previous `filter_length` low                                                |
+| T      | 0     | 0    | 0   | `_/\_¦` | -                  | Already unlatched from a previous `filter_length` low                                                |
+| F      | 1     | 0    | 0   | `‾\¦  ` | -                  | Low was not long enough to reset the latch                                                           |
+| F      | 1     | 0    | 1   | `‾\/  ` | -                  | Low was not long enough to reset the latch                                                           |
+| F      | 1     | 1    | 0   | `‾\/\ ` | -                  | Low was not long enough to reset the latch                                                           |
+| F      | 1     | 1    | 1   | `‾¦   ` | -                  | Ghost of 0 length definitely was not long was not long enough to reset the latch                     |
+| F      | 0     | 1    | 1   | `_/¦  ` | Rising Edge        | High was not long enough to set the latch, but the second half of the ghost can be a new rising edge |
+| F      | 0     | 1    | 0   | `_/\  ` | -                  | High was not long enough to set the latch                                                            |
+| F      | 0     | 0    | 1   | `_/\/ ` | Rising Edge        | High was not long enough to set the latch, but this may be a rising edge                             |
+| F      | 0     | 0    | 0   | `_¦ `   | -                  | Ghost of 0 length definitely was not long was not long enough to set the latch                       |
+
+## Startup
+
+On startup the filter should not consider whatever state it is in as valid so it does not count a strange pulse.
+There are two possible starting configurations, either the pin is high or the pin is low.
+If the pin is high, the subsequent falling edge should not count as a pulse as we never saw the rising edge.
+Therefore we start in the latched state.
+If the pin is low, the subsequent rising edge can be counted as the first pulse.
+Therefore we start in the unlatched state.

esphome/components/pulse_meter/pulse_meter_sensor.cpp

@@ -24,11 +24,16 @@ void PulseMeterSensor::setup() {
   if (this->filter_mode_ == FILTER_EDGE) {
     this->pin_->attach_interrupt(PulseMeterSensor::edge_intr, this, gpio::INTERRUPT_RISING_EDGE);
   } else if (this->filter_mode_ == FILTER_PULSE) {
+    // Set the pin value to the current value to avoid a false edge
+    this->pulse_state_.last_pin_val_ = this->isr_pin_.digital_read();
+    this->pulse_state_.latched_ = this->pulse_state_.last_pin_val_;
     this->pin_->attach_interrupt(PulseMeterSensor::pulse_intr, this, gpio::INTERRUPT_ANY_EDGE);
   }
 }
 
 void PulseMeterSensor::loop() {
+  const uint32_t now = micros();
+
   // Reset the count in get before we pass it back to the ISR as set
   this->get_->count_ = 0;
 
@@ -38,6 +43,20 @@ void PulseMeterSensor::loop() {
   this->set_ = this->get_;
   this->get_ = temp;
 
+  // If an edge was peeked, repay the debt
+  if (this->peeked_edge_ && this->get_->count_ > 0) {
+    this->peeked_edge_ = false;
+    this->get_->count_--;
+  }
+
+  // If there is an unprocessed edge, and filter_us_ has passed since, count this edge early
+  if (this->get_->last_rising_edge_us_ != this->get_->last_detected_edge_us_ &&
+      now - this->get_->last_rising_edge_us_ >= this->filter_us_) {
+    this->peeked_edge_ = true;
+    this->get_->last_detected_edge_us_ = this->get_->last_rising_edge_us_;
+    this->get_->count_++;
+  }
+
   // Check if we detected a pulse this loop
   if (this->get_->count_ > 0) {
     // Keep a running total of pulses if a total sensor is configured
@@ -64,7 +83,6 @@ void PulseMeterSensor::loop() {
   }
   // No detected edges this loop
   else {
-    const uint32_t now = micros();
     const uint32_t time_since_valid_edge_us = now - this->last_processed_edge_us_;
 
     switch (this->meter_state_) {
@@ -102,11 +120,14 @@ void IRAM_ATTR PulseMeterSensor::edge_intr(PulseMeterSensor *sensor) {
   // This is an interrupt handler - we can't call any virtual method from this method
   // Get the current time before we do anything else so the measurements are consistent
   const uint32_t now = micros();
+  auto &state = sensor->edge_state_;
+  auto &set = *sensor->set_;
 
-  if ((now - sensor->last_edge_candidate_us_) >= sensor->filter_us_) {
+  if ((now - state.last_sent_edge_us_) >= sensor->filter_us_) {
-    sensor->last_edge_candidate_us_ = now;
+    state.last_sent_edge_us_ = now;
-    sensor->set_->last_detected_edge_us_ = now;
+    set.last_detected_edge_us_ = now;
-    sensor->set_->count_++;
+    set.last_rising_edge_us_ = now;
+    set.count_++;
   }
 }
 
@@ -115,33 +136,27 @@ void IRAM_ATTR PulseMeterSensor::pulse_intr(PulseMeterSensor *sensor) {
   // Get the current time before we do anything else so the measurements are consistent
   const uint32_t now = micros();
   const bool pin_val = sensor->isr_pin_.digital_read();
+  auto &state = sensor->pulse_state_;
+  auto &set = *sensor->set_;
 
-  // A pulse occurred faster than we can detect
+  // Filter length has passed since the last interrupt
-  if (sensor->last_pin_val_ == pin_val) {
+  const bool length = now - state.last_intr_ >= sensor->filter_us_;
-    // If we haven't reached the filter length yet we need to reset our last_intr_ to now
-    // otherwise we can consider this noise as the "pulse" was certainly less than filter_us_
-    if (now - sensor->last_intr_ < sensor->filter_us_) {
-      sensor->last_intr_ = now;
-    }
-  } else {
-    // Check if the last interrupt was long enough in the past
-    if (now - sensor->last_intr_ > sensor->filter_us_) {
-      // High pulse of filter length now falling (therefore last_intr_ was the rising edge)
-      if (!sensor->in_pulse_ && sensor->last_pin_val_) {
-        sensor->last_edge_candidate_us_ = sensor->last_intr_;
-        sensor->in_pulse_ = true;
-      }
-      // Low pulse of filter length now rising (therefore last_intr_ was the falling edge)
-      else if (sensor->in_pulse_ && !sensor->last_pin_val_) {
-        sensor->set_->last_detected_edge_us_ = sensor->last_edge_candidate_us_;
-        sensor->set_->count_++;
-        sensor->in_pulse_ = false;
-      }
-    }
 
-    sensor->last_intr_ = now;
+  if (length && state.latched_ && !state.last_pin_val_) {  // Long enough low edge
-    sensor->last_pin_val_ = pin_val;
+    state.latched_ = false;
+  } else if (length && !state.latched_ && state.last_pin_val_) {  // Long enough high edge
+    state.latched_ = true;
+    set.last_detected_edge_us_ = state.last_intr_;
+    set.count_++;
   }
+
+  // Due to order of operations this includes
+  //    length && latched && rising   (just reset from a long low edge)
+  //    !latched && (rising || high)  (noise on the line resetting the potential rising edge)
+  set.last_rising_edge_us_ = !state.latched_ && pin_val ? now : set.last_detected_edge_us_;
+
+  state.last_intr_ = now;
+  state.last_pin_val_ = pin_val;
 }
 
 }  // namespace pulse_meter

esphome/components/pulse_meter/pulse_meter_sensor.h

@@ -43,6 +43,7 @@ class PulseMeterSensor : public sensor::Sensor, public Component {
   // Variables used in the loop
   enum class MeterState { INITIAL, RUNNING, TIMED_OUT };
   MeterState meter_state_ = MeterState::INITIAL;
+  bool peeked_edge_ = false;
   uint32_t total_pulses_ = 0;
   uint32_t last_processed_edge_us_ = 0;
 
@@ -53,6 +54,7 @@ class PulseMeterSensor : public sensor::Sensor, public Component {
   // (except for resetting the values)
   struct State {
     uint32_t last_detected_edge_us_ = 0;
+    uint32_t last_rising_edge_us_ = 0;
     uint32_t count_ = 0;
   };
   State state_[2];
@@ -61,10 +63,20 @@ class PulseMeterSensor : public sensor::Sensor, public Component {
 
   // Only use these variables in the ISR
   ISRInternalGPIOPin isr_pin_;
-  uint32_t last_edge_candidate_us_ = 0;
+
-  uint32_t last_intr_ = 0;
+  /// Filter state for edge mode
-  bool in_pulse_ = false;
+  struct EdgeState {
-  bool last_pin_val_ = false;
+    uint32_t last_sent_edge_us_ = 0;
+  };
+  EdgeState edge_state_{};
+
+  /// Filter state for pulse mode
+  struct PulseState {
+    uint32_t last_intr_ = 0;
+    bool latched_ = false;
+    bool last_pin_val_ = false;
+  };
+  PulseState pulse_state_{};
 };
 
 }  // namespace pulse_meter

esphome/components/remote_receiver/remote_receiver.h

@@ -58,6 +58,7 @@ class RemoteReceiverComponent : public remote_base::RemoteReceiverBase,
   void decode_rmt_(rmt_item32_t *item, size_t len);
   RingbufHandle_t ringbuf_;
   esp_err_t error_code_{ESP_OK};
+  std::string error_string_{""};
 #endif
 
 #if defined(USE_ESP8266) || defined(USE_LIBRETINY)

esphome/components/remote_receiver/remote_receiver_esp32.cpp

@@ -29,6 +29,7 @@ void RemoteReceiverComponent::setup() {
   esp_err_t error = rmt_config(&rmt);
   if (error != ESP_OK) {
     this->error_code_ = error;
+    this->error_string_ = "in rmt_config";
     this->mark_failed();
     return;
   }
@@ -36,18 +37,25 @@ void RemoteReceiverComponent::setup() {
   error = rmt_driver_install(this->channel_, this->buffer_size_, 0);
   if (error != ESP_OK) {
     this->error_code_ = error;
+    if (error == ESP_ERR_INVALID_STATE) {
+      this->error_string_ = str_sprintf("RMT channel %i is already in use by another component", this->channel_);
+    } else {
+      this->error_string_ = "in rmt_driver_install";
+    }
     this->mark_failed();
     return;
   }
   error = rmt_get_ringbuf_handle(this->channel_, &this->ringbuf_);
   if (error != ESP_OK) {
     this->error_code_ = error;
+    this->error_string_ = "in rmt_get_ringbuf_handle";
     this->mark_failed();
     return;
   }
   error = rmt_rx_start(this->channel_, true);
   if (error != ESP_OK) {
     this->error_code_ = error;
+    this->error_string_ = "in rmt_rx_start";
     this->mark_failed();
     return;
   }
@@ -67,7 +75,8 @@ void RemoteReceiverComponent::dump_config() {
   ESP_LOGCONFIG(TAG, "  Filter out pulses shorter than: %" PRIu32 " us", this->filter_us_);
   ESP_LOGCONFIG(TAG, "  Signal is done after %" PRIu32 " us of no changes", this->idle_us_);
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Configuring RMT driver failed: %s", esp_err_to_name(this->error_code_));
+    ESP_LOGE(TAG, "Configuring RMT driver failed: %s (%s)", esp_err_to_name(this->error_code_),
+             this->error_string_.c_str());
   }
 }
 

esphome/components/remote_transmitter/remote_transmitter.h

@@ -53,6 +53,7 @@ class RemoteTransmitterComponent : public remote_base::RemoteTransmitterBase,
   bool initialized_{false};
   std::vector<rmt_item32_t> rmt_temp_;
   esp_err_t error_code_{ESP_OK};
+  std::string error_string_{""};
   bool inverted_{false};
 #endif
   uint8_t carrier_duty_percent_;

esphome/components/remote_transmitter/remote_transmitter_esp32.cpp

@@ -23,7 +23,8 @@ void RemoteTransmitterComponent::dump_config() {
   }
 
   if (this->is_failed()) {
-    ESP_LOGE(TAG, "Configuring RMT driver failed: %s", esp_err_to_name(this->error_code_));
+    ESP_LOGE(TAG, "Configuring RMT driver failed: %s (%s)", esp_err_to_name(this->error_code_),
+             this->error_string_.c_str());
   }
 }
 
@@ -56,6 +57,7 @@ void RemoteTransmitterComponent::configure_rmt_() {
   esp_err_t error = rmt_config(&c);
   if (error != ESP_OK) {
     this->error_code_ = error;
+    this->error_string_ = "in rmt_config";
     this->mark_failed();
     return;
   }
@@ -64,6 +66,11 @@ void RemoteTransmitterComponent::configure_rmt_() {
     error = rmt_driver_install(this->channel_, 0, 0);
     if (error != ESP_OK) {
       this->error_code_ = error;
+      if (error == ESP_ERR_INVALID_STATE) {
+        this->error_string_ = str_sprintf("RMT channel %i is already in use by another component", this->channel_);
+      } else {
+        this->error_string_ = "in rmt_driver_install";
+      }
       this->mark_failed();
       return;
     }

esphome/components/sx1509/binary_sensor/__init__.py

@@ -1,12 +1,10 @@
 import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome.components import binary_sensor
+from esphome.const import CONF_ROW, CONF_COL
 
 from .. import SX1509Component, sx1509_ns, CONF_SX1509_ID
 
-CONF_ROW = "row"
-CONF_COL = "col"
-
 DEPENDENCIES = ["sx1509"]
 
 SX1509BinarySensor = sx1509_ns.class_("SX1509BinarySensor", binary_sensor.BinarySensor)

esphome/components/template/datetime/__init__.py

@@ -72,21 +72,25 @@ CONFIG_SCHEMA = cv.All(
             .extend(_BASE_SCHEMA)
             .extend(
                 {
-                    cv.Optional(CONF_INITIAL_VALUE): cv.date_time(allowed_time=False),
+                    cv.Optional(CONF_INITIAL_VALUE): cv.date_time(
+                        date=True, time=False
+                    ),
                 }
             ),
             "TIME": datetime.time_schema(TemplateTime)
             .extend(_BASE_SCHEMA)
             .extend(
                 {
-                    cv.Optional(CONF_INITIAL_VALUE): cv.date_time(allowed_date=False),
+                    cv.Optional(CONF_INITIAL_VALUE): cv.date_time(
+                        date=False, time=True
+                    ),
                 }
             ),
             "DATETIME": datetime.datetime_schema(TemplateDateTime)
             .extend(_BASE_SCHEMA)
             .extend(
                 {
-                    cv.Optional(CONF_INITIAL_VALUE): cv.date_time(),
+                    cv.Optional(CONF_INITIAL_VALUE): cv.date_time(date=True, time=True),
                 }
             ),
         },

esphome/components/template/datetime/template_datetime.h

@@ -2,7 +2,7 @@
 
 #include "esphome/core/defines.h"
 
-#ifdef USE_DATETIME_TIME
+#ifdef USE_DATETIME_DATETIME
 
 #include "esphome/components/datetime/datetime_entity.h"
 #include "esphome/core/automation.h"
@@ -43,4 +43,4 @@ class TemplateDateTime : public datetime::DateTimeEntity, public PollingComponen
 }  // namespace template_
 }  // namespace esphome
 
-#endif  // USE_DATETIME_TIME
+#endif  // USE_DATETIME_DATETIME

esphome/components/time_based/time_based_cover.cpp

@@ -96,6 +96,9 @@ void TimeBasedCover::control(const CoverCall &call) {
       }
     } else {
       auto op = pos < this->position ? COVER_OPERATION_CLOSING : COVER_OPERATION_OPENING;
+      if (this->manual_control_ && (pos == COVER_OPEN || pos == COVER_CLOSED)) {
+        this->position = pos == COVER_CLOSED ? COVER_OPEN : COVER_CLOSED;
+      }
       this->target_position_ = pos;
       this->start_direction_(op);
     }

esphome/components/voice_assistant/__init__.py

@@ -8,6 +8,7 @@ from esphome.const import (
     CONF_MEDIA_PLAYER,
     CONF_ON_CLIENT_CONNECTED,
     CONF_ON_CLIENT_DISCONNECTED,
+    CONF_ON_IDLE,
 )
 from esphome import automation
 from esphome.automation import register_action, register_condition
@@ -32,7 +33,6 @@ CONF_ON_TTS_START = "on_tts_start"
 CONF_ON_TTS_STREAM_START = "on_tts_stream_start"
 CONF_ON_TTS_STREAM_END = "on_tts_stream_end"
 CONF_ON_WAKE_WORD_DETECTED = "on_wake_word_detected"
-CONF_ON_IDLE = "on_idle"
 
 CONF_SILENCE_DETECTION = "silence_detection"
 CONF_USE_WAKE_WORD = "use_wake_word"

esphome/components/voice_assistant/voice_assistant.h

@@ -94,10 +94,10 @@ class VoiceAssistant : public Component {
   uint32_t get_feature_flags() const {
     uint32_t flags = 0;
     flags |= VoiceAssistantFeature::FEATURE_VOICE_ASSISTANT;
+    flags |= VoiceAssistantFeature::FEATURE_API_AUDIO;
 #ifdef USE_SPEAKER
     if (this->speaker_ != nullptr) {
       flags |= VoiceAssistantFeature::FEATURE_SPEAKER;
-      flags |= VoiceAssistantFeature::FEATURE_API_AUDIO;
     }
 #endif
     return flags;

esphome/components/web_server_base/__init__.py

@@ -37,4 +37,4 @@ async def to_code(config):
             cg.add_library("FS", None)
             cg.add_library("Update", None)
         # https://github.com/esphome/ESPAsyncWebServer/blob/master/library.json
-        cg.add_library("esphome/ESPAsyncWebServer-esphome", "3.1.0")
+        cg.add_library("esphome/ESPAsyncWebServer-esphome", "3.2.0")

esphome/components/wifi/wifi_component.cpp

@@ -694,7 +694,7 @@ void WiFiComponent::retry_connect() {
 }
 
 bool WiFiComponent::can_proceed() {
-  if (!this->has_sta() || this->state_ == WIFI_COMPONENT_STATE_DISABLED) {
+  if (!this->has_sta() || this->state_ == WIFI_COMPONENT_STATE_DISABLED || this->ap_setup_) {
     return true;
   }
   return this->is_connected();

esphome/config.py

@@ -148,6 +148,8 @@ class Config(OrderedDict, fv.FinalValidateConfig):
         path = path or []
         try:
             yield
+        except cv.FinalExternalInvalid as e:
+            self.add_error(e)
         except vol.Invalid as e:
             e.prepend(path)
             self.add_error(e)

esphome/config_validation.py

@@ -267,6 +267,10 @@ class Required(vol.Required):
         super().__init__(key, msg=msg)
 
 
+class FinalExternalInvalid(Invalid):
+    """Represents an invalid value in the final validation phase where the path should not be prepended."""
+
+
 def check_not_templatable(value):
     if isinstance(value, Lambda):
         raise Invalid("This option is not templatable!")
@@ -821,57 +825,50 @@ positive_not_null_time_period = All(
 
 
 def time_of_day(value):
-    return date_time(allowed_date=False, allowed_time=True)(value)
+    return date_time(date=False, time=True)(value)
 
 
-def date_time(allowed_date: bool = True, allowed_time: bool = True):
+def date_time(date: bool, time: bool):
 
     pattern_str = r"^"  # Start of string
-    if allowed_date:
+    if date:
+        pattern_str += r"\d{4}-\d{1,2}-\d{1,2}"
+        if time:
+            pattern_str += r" "
+    if time:
         pattern_str += (
-            r"("  # 1. Optional Date group
+            r"\d{1,2}:\d{2}"  # Hour/Minute
-            r"\d{4}-\d{1,2}-\d{1,2}"  # Date
+            r"(:\d{2})?"  # 1. Seconds
-            r"(?:\s(?=.+))?"  # Space after date only if time is following
+            r"("  # 2. Optional AM/PM group
-            r")?"  # End optional Date group
+            r"(\s)?"  # 3. Optional Space
-        )
-    if allowed_time:
-        pattern_str += (
-            r"("  # 2. Optional Time group
-            r"(\d{1,2}:\d{2})"  # 3. Hour/Minute
-            r"(:\d{2})?"  # 4. Seconds
-            r"("  # 5. Optional AM/PM group
-            r"(\s)?"  # 6. Optional Space
             r"(?:AM|PM|am|pm)"  # AM/PM string matching
             r")?"  # End optional AM/PM group
-            r")?"  # End optional Time group
         )
     pattern_str += r"$"  # End of string
 
     pattern = re.compile(pattern_str)
 
     exc_message = ""
-    if allowed_date:
+    if date:
         exc_message += "date"
-        if allowed_time:
+    if time:
-            exc_message += "/"
-    if allowed_time:
         exc_message += "time"
 
     schema = Schema({})
-    if allowed_date:
+    if date:
         schema = schema.extend(
             {
-                Optional(CONF_YEAR): int_range(min=1970, max=3000),
+                Required(CONF_YEAR): int_range(min=1970, max=3000),
-                Optional(CONF_MONTH): int_range(min=1, max=12),
+                Required(CONF_MONTH): int_range(min=1, max=12),
-                Optional(CONF_DAY): int_range(min=1, max=31),
+                Required(CONF_DAY): int_range(min=1, max=31),
             }
         )
-    if allowed_time:
+    if time:
         schema = schema.extend(
             {
-                Optional(CONF_HOUR): int_range(min=0, max=23),
+                Required(CONF_HOUR): int_range(min=0, max=23),
-                Optional(CONF_MINUTE): int_range(min=0, max=59),
+                Required(CONF_MINUTE): int_range(min=0, max=59),
-                Optional(CONF_SECOND): int_range(min=0, max=59),
+                Required(CONF_SECOND): int_range(min=0, max=59),
             }
         )
 
@@ -885,21 +882,21 @@ def date_time(allowed_date: bool = True, allowed_time: bool = True):
             # pylint: disable=raise-missing-from
             raise Invalid(f"Invalid {exc_message}: {value}")
 
-        if allowed_date:
+        if time:
-            has_date = match[1] is not None
+            has_seconds = match[1] is not None
-        if allowed_time:
+            has_ampm = match[2] is not None
-            has_time = match[2] is not None
+            has_ampm_space = match[3] is not None
-            has_seconds = match[3] is not None
-            has_ampm = match[4] is not None
-            has_ampm_space = match[5] is not None
 
         format = ""
-        if allowed_date and has_date:
+        if date:
             format += "%Y-%m-%d"
-            if allowed_time and has_time:
+            if time:
                 format += " "
-        if allowed_time and has_time:
+        if time:
-            format += "%H:%M"
+            if has_ampm:
+                format += "%I:%M"
+            else:
+                format += "%H:%M"
             if has_seconds:
                 format += ":%S"
             if has_ampm_space:
@@ -914,12 +911,12 @@ def date_time(allowed_date: bool = True, allowed_time: bool = True):
             raise Invalid(f"Invalid {exc_message}: {err}")
 
         return_value = {}
-        if allowed_date and has_date:
+        if date:
             return_value[CONF_YEAR] = date_obj.year
             return_value[CONF_MONTH] = date_obj.month
             return_value[CONF_DAY] = date_obj.day
 
-        if allowed_time and has_time:
+        if time:
             return_value[CONF_HOUR] = date_obj.hour
             return_value[CONF_MINUTE] = date_obj.minute
             return_value[CONF_SECOND] = date_obj.second if has_seconds else 0
@@ -2124,6 +2121,7 @@ GIT_SCHEMA = Schema(
         Optional(CONF_REF): git_ref,
         Optional(CONF_USERNAME): string,
         Optional(CONF_PASSWORD): string,
+        Optional(CONF_PATH): string,
     }
 )
 LOCAL_SCHEMA = Schema(

esphome/const.py

@@ -1,6 +1,6 @@
 """Constants used by esphome."""
 
-__version__ = "2024.5.0-dev"
+__version__ = "2024.6.0-dev"
 
 ALLOWED_NAME_CHARS = "abcdefghijklmnopqrstuvwxyz0123456789-_"
 VALID_SUBSTITUTIONS_CHARACTERS = (
@@ -51,6 +51,7 @@ CONF_ALPHA = "alpha"
 CONF_ALTITUDE = "altitude"
 CONF_ANALOG = "analog"
 CONF_AND = "and"
+CONF_ANGLE = "angle"
 CONF_AP = "ap"
 CONF_APPARENT_POWER = "apparent_power"
 CONF_ARDUINO_VERSION = "arduino_version"
@@ -124,6 +125,7 @@ CONF_CLOSE_DURATION = "close_duration"
 CONF_CLOSE_ENDSTOP = "close_endstop"
 CONF_CO2 = "co2"
 CONF_CODE = "code"
+CONF_COL = "col"
 CONF_COLD_WHITE = "cold_white"
 CONF_COLD_WHITE_COLOR_TEMPERATURE = "cold_white_color_temperature"
 CONF_COLOR = "color"
@@ -218,6 +220,7 @@ CONF_DISCOVERY_PREFIX = "discovery_prefix"
 CONF_DISCOVERY_RETAIN = "discovery_retain"
 CONF_DISCOVERY_UNIQUE_ID_GENERATOR = "discovery_unique_id_generator"
 CONF_DISPLAY = "display"
+CONF_DISPLAY_ID = "display_id"
 CONF_DISTANCE = "distance"
 CONF_DITHER = "dither"
 CONF_DIV_RATIO = "div_ratio"
@@ -539,6 +542,7 @@ CONF_ON_FINGER_SCAN_MISPLACED = "on_finger_scan_misplaced"
 CONF_ON_FINGER_SCAN_START = "on_finger_scan_start"
 CONF_ON_FINGER_SCAN_UNMATCHED = "on_finger_scan_unmatched"
 CONF_ON_FINISHED_WRITE = "on_finished_write"
+CONF_ON_IDLE = "on_idle"
 CONF_ON_JSON_MESSAGE = "on_json_message"
 CONF_ON_LOCK = "on_lock"
 CONF_ON_LOOP = "on_loop"
@@ -702,6 +706,7 @@ CONF_RGBW = "rgbw"
 CONF_RISING_EDGE = "rising_edge"
 CONF_RMT_CHANNEL = "rmt_channel"
 CONF_ROTATION = "rotation"
+CONF_ROW = "row"
 CONF_RS_PIN = "rs_pin"
 CONF_RTD_NOMINAL_RESISTANCE = "rtd_nominal_resistance"
 CONF_RTD_WIRES = "rtd_wires"
@@ -879,6 +884,7 @@ CONF_VALUE_FONT = "value_font"
 CONF_VARIABLES = "variables"
 CONF_VARIANT = "variant"
 CONF_VERSION = "version"
+CONF_VIBRATIONS = "vibrations"
 CONF_VISIBLE = "visible"
 CONF_VISUAL = "visual"
 CONF_VOLTAGE = "voltage"
@@ -978,6 +984,7 @@ ICON_SIGNAL_DISTANCE_VARIANT = "mdi:signal"
 ICON_THERMOMETER = "mdi:thermometer"
 ICON_TIMELAPSE = "mdi:timelapse"
 ICON_TIMER = "mdi:timer-outline"
+ICON_VIBRATE = "mdi:vibrate"
 ICON_WATER = "mdi:water"
 ICON_WATER_PERCENT = "mdi:water-percent"
 ICON_WEATHER_SUNSET = "mdi:weather-sunset"
@@ -1019,6 +1026,7 @@ UNIT_METER_PER_SECOND_SQUARED = "m/s²"
 UNIT_MICROGRAMS_PER_CUBIC_METER = "µg/m³"
 UNIT_MICROMETER = "µm"
 UNIT_MICROSIEMENS_PER_CENTIMETER = "µS/cm"
+UNIT_MICROSILVERTS_PER_HOUR = "µSv/h"
 UNIT_MICROTESLA = "µT"
 UNIT_MILLIGRAMS_PER_CUBIC_METER = "mg/m³"
 UNIT_MILLISECOND = "ms"

esphome/core/__init__.py

@@ -340,6 +340,8 @@ class ID:
 
         if self.id is None:
             base = str(self.type).replace("::", "_").lower()
+            if base == self.type:
+                base = base + "_id"
             name = "".join(c for c in base if c.isalnum() or c == "_")
             used = set(registered_ids) | set(RESERVED_IDS) | CORE.loaded_integrations
             self.id = ensure_unique_string(name, used)

esphome/core/automation.h

@@ -24,7 +24,7 @@ template<int... S> struct gens<0, S...> { using type = seq<S...>; };  // NOLINT
 
 template<typename T, typename... X> class TemplatableValue {
  public:
-  TemplatableValue() : type_(EMPTY) {}
+  TemplatableValue() : type_(NONE) {}
 
   template<typename F, enable_if_t<!is_invocable<F, X...>::value, int> = 0>
   TemplatableValue(F value) : type_(VALUE), value_(value) {}
@@ -32,13 +32,13 @@ template<typename T, typename... X> class TemplatableValue {
   template<typename F, enable_if_t<is_invocable<F, X...>::value, int> = 0>
   TemplatableValue(F f) : type_(LAMBDA), f_(f) {}
 
-  bool has_value() { return this->type_ != EMPTY; }
+  bool has_value() { return this->type_ != NONE; }
 
   T value(X... x) {
     if (this->type_ == LAMBDA) {
       return this->f_(x...);
     }
-    // return value also when empty
+    // return value also when none
     return this->value_;
   }
 
@@ -58,7 +58,7 @@ template<typename T, typename... X> class TemplatableValue {
 
  protected:
   enum {
-    EMPTY,
+    NONE,
     VALUE,
     LAMBDA,
   } type_;

esphome/cpp_generator.py

@@ -2,7 +2,7 @@ import abc
 import inspect
 import math
 import re
-from collections.abc import Generator, Sequence
+from collections.abc import Sequence
 from typing import Any, Callable, Optional, Union
 
 from esphome.core import (
@@ -477,6 +477,7 @@ def variable(
     :param rhs: The expression to place on the right hand side of the assignment.
     :param type_: Manually define a type for the variable, only use this when it's not possible
       to do so during config validation phase (for example because of template arguments).
+    :param register: If true register the variable with the core
 
     :return: The new variable as a MockObj.
     """
@@ -492,9 +493,7 @@ def variable(
     return obj
 
 
-def with_local_variable(
+def with_local_variable(id_: ID, rhs: SafeExpType, callback: Callable, *args) -> None:
-    id_: ID, rhs: SafeExpType, callback: Callable[["MockObj"], None], *args
-) -> None:
     """Declare a new variable, not pointer type, in the code generation, within a scoped block
     The variable is only usable within the callback
     The callback cannot be async.
@@ -599,6 +598,7 @@ def add_library(name: str, version: Optional[str], repository: Optional[str] = N
 
     :param name: The name of the library (for example 'AsyncTCP')
     :param version: The version of the library, may be None.
+    :param repository: The repository for the library
     """
     CORE.add_library(Library(name, version, repository))
 
@@ -654,7 +654,7 @@ async def process_lambda(
     parameters: list[tuple[SafeExpType, str]],
     capture: str = "=",
     return_type: SafeExpType = None,
-) -> Generator[LambdaExpression, None, None]:
+) -> Union[LambdaExpression, None]:
     """Process the given lambda value into a LambdaExpression.
 
     This is a coroutine because lambdas can depend on other IDs,
@@ -673,7 +673,7 @@ async def process_lambda(
     )
 
     if value is None:
-        return
+        return None
     parts = value.parts[:]
     for i, id in enumerate(value.requires_ids):
         full_id, var = await get_variable_with_full_id(id)
@@ -712,7 +712,7 @@ async def templatable(
     value: Any,
     args: list[tuple[SafeExpType, str]],
     output_type: Optional[SafeExpType],
-    to_exp: Any = None,
+    to_exp: Union[Callable, dict] = None,
 ):
     """Generate code for a templatable config option.
 

platformio.ini

@@ -58,7 +58,7 @@ lib_deps =
     SPI                                                   ; spi (Arduino built-in)
     Wire                                                  ; i2c (Arduino built-int)
     heman/AsyncMqttClient-esphome@1.0.0                   ; mqtt
-    esphome/ESPAsyncWebServer-esphome@2.1.0               ; web_server_base
+    esphome/ESPAsyncWebServer-esphome@3.2.0               ; web_server_base
     fastled/FastLED@3.3.2                                 ; fastled_base
     mikalhart/TinyGPSPlus@1.0.2                           ; gps
     freekode/TM1651@1.0.1                                 ; tm1651
@@ -137,7 +137,7 @@ extra_scripts = post:esphome/components/esp32/post_build.py.script
 extends = common:idf
 platform = platformio/espressif32@5.4.0
 platform_packages =
-    platformio/framework-espidf@~3.40406.0
+    platformio/framework-espidf@~3.40407.0
 
 framework = espidf
 lib_deps =

requirements.txt

@@ -9,7 +9,7 @@ tornado==6.4
 tzlocal==5.2    # from time
 tzdata>=2021.1  # from time
 pyserial==3.5
-platformio==6.1.13  # When updating platformio, also update Dockerfile
+platformio==6.1.15  # When updating platformio, also update Dockerfile
 esptool==4.7.0
 click==8.1.7
 esphome-dashboard==20240412.0

script/clang-tidy

@@ -266,7 +266,12 @@ def main():
     if args.fix and failed_files:
         print("Applying fixes ...")
         try:
-            subprocess.call(["clang-apply-replacements-14", tmpdir])
+            try:
+                subprocess.call(["clang-apply-replacements-14", tmpdir])
+            except FileNotFoundError:
+                subprocess.call(["clang-apply-replacements", tmpdir])
+        except FileNotFoundError:
+                print("Error please install clang-apply-replacements-14 or clang-apply-replacements.\n", file=sys.stderr)
         except:
             print("Error applying fixes.\n", file=sys.stderr)
             raise

tests/components/absolute_humidity/common.yaml

@@ -0,0 +1,21 @@
+sensor:
+  - platform: absolute_humidity
+    name: Absolute Humidity
+    temperature: template_temperature
+    humidity: template_humidity
+  - platform: template
+    id: template_humidity
+    lambda: |-
+      if (millis() > 10000) {
+        return 0.6;
+      } else {
+        return 0.0;
+      }
+  - platform: template
+    id: template_temperature
+    lambda: |-
+      if (millis() > 10000) {
+        return 42.0;
+      } else {
+        return 0.0;
+      }

tests/components/absolute_humidity/test.esp32-c3-idf.yaml

@@ -1,21 +1 @@
-sensor:
+<<: !include common.yaml
-  - platform: absolute_humidity
-    name: Absolute Humidity
-    temperature: template_temperature
-    humidity: template_humidity
-  - platform: template
-    id: template_humidity
-    lambda: |-
-      if (millis() > 10000) {
-        return 0.6;
-      } else {
-        return 0.0;
-      }
-  - platform: template
-    id: template_temperature
-    lambda: |-
-      if (millis() > 10000) {
-        return 42.0;
-      } else {
-        return 0.0;
-      }

tests/components/absolute_humidity/test.esp32-c3.yaml

@@ -1,21 +1 @@
-sensor:
+<<: !include common.yaml
-  - platform: absolute_humidity
-    name: Absolute Humidity
-    temperature: template_temperature
-    humidity: template_humidity
-  - platform: template
-    id: template_humidity
-    lambda: |-
-      if (millis() > 10000) {
-        return 0.6;
-      } else {
-        return 0.0;
-      }
-  - platform: template
-    id: template_temperature
-    lambda: |-
-      if (millis() > 10000) {
-        return 42.0;
-      } else {
-        return 0.0;
-      }

tests/components/absolute_humidity/test.esp32-idf.yaml

@@ -1,21 +1 @@
-sensor:
+<<: !include common.yaml
-  - platform: absolute_humidity
-    name: Absolute Humidity
-    temperature: template_temperature
-    humidity: template_humidity
-  - platform: template
-    id: template_humidity
-    lambda: |-
-      if (millis() > 10000) {
-        return 0.6;
-      } else {
-        return 0.0;
-      }
-  - platform: template
-    id: template_temperature
-    lambda: |-
-      if (millis() > 10000) {
-        return 42.0;
-      } else {
-        return 0.0;
-      }

tests/components/absolute_humidity/test.esp32.yaml

@@ -1,21 +1 @@
-sensor:
+<<: !include common.yaml
-  - platform: absolute_humidity
-    name: Absolute Humidity
-    temperature: template_temperature
-    humidity: template_humidity
-  - platform: template
-    id: template_humidity
-    lambda: |-
-      if (millis() > 10000) {
-        return 0.6;
-      } else {
-        return 0.0;
-      }
-  - platform: template
-    id: template_temperature
-    lambda: |-
-      if (millis() > 10000) {
-        return 42.0;
-      } else {
-        return 0.0;
-      }

tests/components/absolute_humidity/test.esp8266.yaml

@@ -1,21 +1 @@
-sensor:
+<<: !include common.yaml
-  - platform: absolute_humidity
-    name: Absolute Humidity
-    temperature: template_temperature
-    humidity: template_humidity
-  - platform: template
-    id: template_humidity
-    lambda: |-
-      if (millis() > 10000) {
-        return 0.6;
-      } else {
-        return 0.0;
-      }
-  - platform: template
-    id: template_temperature
-    lambda: |-
-      if (millis() > 10000) {
-        return 42.0;
-      } else {
-        return 0.0;
-      }

tests/components/absolute_humidity/test.rp2040.yaml

@@ -1,21 +1 @@
-sensor:
+<<: !include common.yaml
-  - platform: absolute_humidity
-    name: Absolute Humidity
-    temperature: template_temperature
-    humidity: template_humidity
-  - platform: template
-    id: template_humidity
-    lambda: |-
-      if (millis() > 10000) {
-        return 0.6;
-      } else {
-        return 0.0;
-      }
-  - platform: template
-    id: template_temperature
-    lambda: |-
-      if (millis() > 10000) {
-        return 42.0;
-      } else {
-        return 0.0;
-      }

tests/components/airthings_wave_mini/common.yaml

@@ -0,0 +1,22 @@
+esp32_ble_tracker:
+
+ble_client:
+  - mac_address: 01:02:03:04:05:06
+    id: airthingsmini01
+
+sensor:
+  - id: airthingswm
+    platform: airthings_wave_mini
+    ble_client_id: airthingsmini01
+    update_interval: 5min
+    battery_update_interval: 12h
+    temperature:
+      name: Wave Mini Temperature
+    humidity:
+      name: Wave Mini Humidity
+    pressure:
+      name: Wave Mini Pressure
+    tvoc:
+      name: Wave Mini VOC
+    battery_voltage:
+      name: Wave Mini Battery Voltage

tests/components/airthings_wave_mini/test.esp32-c3-idf.yaml

@@ -1,22 +1 @@
-esp32_ble_tracker:
+<<: !include common.yaml
-
-ble_client:
-  - mac_address: 01:02:03:04:05:06
-    id: airthingsmini01
-
-sensor:
-  - id: airthingswm
-    platform: airthings_wave_mini
-    ble_client_id: airthingsmini01
-    update_interval: 5min
-    battery_update_interval: 12h
-    temperature:
-      name: Wave Mini Temperature
-    humidity:
-      name: Wave Mini Humidity
-    pressure:
-      name: Wave Mini Pressure
-    tvoc:
-      name: Wave Mini VOC
-    battery_voltage:
-      name: Wave Mini Battery Voltage

tests/components/airthings_wave_mini/test.esp32-c3.yaml

@@ -1,22 +1 @@
-esp32_ble_tracker:
+<<: !include common.yaml
-
-ble_client:
-  - mac_address: 01:02:03:04:05:06
-    id: airthingsmini01
-
-sensor:
-  - id: airthingswm
-    platform: airthings_wave_mini
-    ble_client_id: airthingsmini01
-    update_interval: 5min
-    battery_update_interval: 12h
-    temperature:
-      name: Wave Mini Temperature
-    humidity:
-      name: Wave Mini Humidity
-    pressure:
-      name: Wave Mini Pressure
-    tvoc:
-      name: Wave Mini VOC
-    battery_voltage:
-      name: Wave Mini Battery Voltage

tests/components/airthings_wave_mini/test.esp32-idf.yaml

@@ -1,22 +1 @@
-esp32_ble_tracker:
+<<: !include common.yaml
-
-ble_client:
-  - mac_address: 01:02:03:04:05:06
-    id: airthingsmini01
-
-sensor:
-  - id: airthingswm
-    platform: airthings_wave_mini
-    ble_client_id: airthingsmini01
-    update_interval: 5min
-    battery_update_interval: 12h
-    temperature:
-      name: Wave Mini Temperature
-    humidity:
-      name: Wave Mini Humidity
-    pressure:
-      name: Wave Mini Pressure
-    tvoc:
-      name: Wave Mini VOC
-    battery_voltage:
-      name: Wave Mini Battery Voltage

tests/components/airthings_wave_mini/test.esp32.yaml

@@ -1,22 +1 @@
-esp32_ble_tracker:
+<<: !include common.yaml
-
-ble_client:
-  - mac_address: 01:02:03:04:05:06
-    id: airthingsmini01
-
-sensor:
-  - id: airthingswm
-    platform: airthings_wave_mini
-    ble_client_id: airthingsmini01
-    update_interval: 5min
-    battery_update_interval: 12h
-    temperature:
-      name: Wave Mini Temperature
-    humidity:
-      name: Wave Mini Humidity
-    pressure:
-      name: Wave Mini Pressure
-    tvoc:
-      name: Wave Mini VOC
-    battery_voltage:
-      name: Wave Mini Battery Voltage

tests/components/airthings_wave_plus/common.yaml

@@ -0,0 +1,28 @@
+esp32_ble_tracker:
+
+ble_client:
+  - mac_address: 01:02:03:04:05:06
+    id: airthings01
+
+sensor:
+  - id: airthingswp
+    platform: airthings_wave_plus
+    ble_client_id: airthings01
+    update_interval: 5min
+    battery_update_interval: 12h
+    temperature:
+      name: Wave Plus Temperature
+    radon:
+      name: Wave Plus Radon
+    radon_long_term:
+      name: Wave Plus Radon Long Term
+    pressure:
+      name: Wave Plus Pressure
+    humidity:
+      name: Wave Plus Humidity
+    co2:
+      name: Wave Plus CO2
+    tvoc:
+      name: Wave Plus VOC
+    battery_voltage:
+      name: Wave Plus Battery Voltage

tests/components/airthings_wave_plus/test.esp32-c3-idf.yaml

@@ -1,28 +1 @@
-esp32_ble_tracker:
+<<: !include common.yaml
-
-ble_client:
-  - mac_address: 01:02:03:04:05:06
-    id: airthings01
-
-sensor:
-  - id: airthingswp
-    platform: airthings_wave_plus
-    ble_client_id: airthings01
-    update_interval: 5min
-    battery_update_interval: 12h
-    temperature:
-      name: Wave Plus Temperature
-    radon:
-      name: Wave Plus Radon
-    radon_long_term:
-      name: Wave Plus Radon Long Term
-    pressure:
-      name: Wave Plus Pressure
-    humidity:
-      name: Wave Plus Humidity
-    co2:
-      name: Wave Plus CO2
-    tvoc:
-      name: Wave Plus VOC
-    battery_voltage:
-      name: Wave Plus Battery Voltage

tests/components/airthings_wave_plus/test.esp32-c3.yaml

@@ -1,28 +1 @@
-esp32_ble_tracker:
+<<: !include common.yaml
-
-ble_client:
-  - mac_address: 01:02:03:04:05:06
-    id: airthings01
-
-sensor:
-  - id: airthingswp
-    platform: airthings_wave_plus
-    ble_client_id: airthings01
-    update_interval: 5min
-    battery_update_interval: 12h
-    temperature:
-      name: Wave Plus Temperature
-    radon:
-      name: Wave Plus Radon
-    radon_long_term:
-      name: Wave Plus Radon Long Term
-    pressure:
-      name: Wave Plus Pressure
-    humidity:
-      name: Wave Plus Humidity
-    co2:
-      name: Wave Plus CO2
-    tvoc:
-      name: Wave Plus VOC
-    battery_voltage:
-      name: Wave Plus Battery Voltage

tests/components/airthings_wave_plus/test.esp32-idf.yaml

@@ -1,28 +1 @@
-esp32_ble_tracker:
+<<: !include common.yaml
-
-ble_client:
-  - mac_address: 01:02:03:04:05:06
-    id: airthings01
-
-sensor:
-  - id: airthingswp
-    platform: airthings_wave_plus
-    ble_client_id: airthings01
-    update_interval: 5min
-    battery_update_interval: 12h
-    temperature:
-      name: Wave Plus Temperature
-    radon:
-      name: Wave Plus Radon
-    radon_long_term:
-      name: Wave Plus Radon Long Term
-    pressure:
-      name: Wave Plus Pressure
-    humidity:
-      name: Wave Plus Humidity
-    co2:
-      name: Wave Plus CO2
-    tvoc:
-      name: Wave Plus VOC
-    battery_voltage:
-      name: Wave Plus Battery Voltage

tests/components/airthings_wave_plus/test.esp32.yaml

@@ -1,28 +1 @@
-esp32_ble_tracker:
+<<: !include common.yaml
-
-ble_client:
-  - mac_address: 01:02:03:04:05:06
-    id: airthings01
-
-sensor:
-  - id: airthingswp
-    platform: airthings_wave_plus
-    ble_client_id: airthings01
-    update_interval: 5min
-    battery_update_interval: 12h
-    temperature:
-      name: Wave Plus Temperature
-    radon:
-      name: Wave Plus Radon
-    radon_long_term:
-      name: Wave Plus Radon Long Term
-    pressure:
-      name: Wave Plus Pressure
-    humidity:
-      name: Wave Plus Humidity
-    co2:
-      name: Wave Plus CO2
-    tvoc:
-      name: Wave Plus VOC
-    battery_voltage:
-      name: Wave Plus Battery Voltage

tests/components/alarm_control_panel/common.yaml

@@ -0,0 +1,64 @@
+binary_sensor:
+  - platform: gpio
+    id: bin1
+    pin: 1
+
+alarm_control_panel:
+  - platform: template
+    id: alarmcontrolpanel1
+    name: Alarm Panel
+    codes:
+      - "1234"
+    requires_code_to_arm: true
+    arming_home_time: 1s
+    arming_night_time: 1s
+    arming_away_time: 15s
+    pending_time: 15s
+    trigger_time: 30s
+    binary_sensors:
+      - input: bin1
+        bypass_armed_home: true
+        bypass_armed_night: true
+    on_state:
+      then:
+        - lambda: !lambda |-
+            ESP_LOGD("TEST", "State change %s", LOG_STR_ARG(alarm_control_panel_state_to_string(id(alarmcontrolpanel1)->get_state())));
+  - platform: template
+    id: alarmcontrolpanel2
+    name: Alarm Panel
+    codes:
+      - "1234"
+    requires_code_to_arm: true
+    arming_home_time: 1s
+    arming_night_time: 1s
+    arming_away_time: 15s
+    pending_time: 15s
+    trigger_time: 30s
+    binary_sensors:
+      - input: bin1
+        bypass_armed_home: true
+        bypass_armed_night: true
+    on_disarmed:
+      then:
+        - logger.log: "### DISARMED ###"
+    on_pending:
+      then:
+        - logger.log: "### PENDING ###"
+    on_arming:
+      then:
+        - logger.log: "### ARMING ###"
+    on_armed_home:
+      then:
+        - logger.log: "### ARMED HOME ###"
+    on_armed_night:
+      then:
+        - logger.log: "### ARMED NIGHT ###"
+    on_armed_away:
+      then:
+        - logger.log: "### ARMED AWAY ###"
+    on_triggered:
+      then:
+        - logger.log: "### TRIGGERED ###"
+    on_cleared:
+      then:
+        - logger.log: "### CLEARED ###"

tests/components/alarm_control_panel/test.esp32-c3-idf.yaml

@@ -1,64 +1 @@
-binary_sensor:
+<<: !include common.yaml
-  - platform: gpio
-    id: bin1
-    pin: 1
-
-alarm_control_panel:
-  - platform: template
-    id: alarmcontrolpanel1
-    name: Alarm Panel
-    codes:
-      - "1234"
-    requires_code_to_arm: true
-    arming_home_time: 1s
-    arming_night_time: 1s
-    arming_away_time: 15s
-    pending_time: 15s
-    trigger_time: 30s
-    binary_sensors:
-      - input: bin1
-        bypass_armed_home: true
-        bypass_armed_night: true
-    on_state:
-      then:
-        - lambda: !lambda |-
-            ESP_LOGD("TEST", "State change %s", LOG_STR_ARG(alarm_control_panel_state_to_string(id(alarmcontrolpanel1)->get_state())));
-  - platform: template
-    id: alarmcontrolpanel2
-    name: Alarm Panel
-    codes:
-      - "1234"
-    requires_code_to_arm: true
-    arming_home_time: 1s
-    arming_night_time: 1s
-    arming_away_time: 15s
-    pending_time: 15s
-    trigger_time: 30s
-    binary_sensors:
-      - input: bin1
-        bypass_armed_home: true
-        bypass_armed_night: true
-    on_disarmed:
-      then:
-        - logger.log: "### DISARMED ###"
-    on_pending:
-      then:
-        - logger.log: "### PENDING ###"
-    on_arming:
-      then:
-        - logger.log: "### ARMING ###"
-    on_armed_home:
-      then:
-        - logger.log: "### ARMED HOME ###"
-    on_armed_night:
-      then:
-        - logger.log: "### ARMED NIGHT ###"
-    on_armed_away:
-      then:
-        - logger.log: "### ARMED AWAY ###"
-    on_triggered:
-      then:
-        - logger.log: "### TRIGGERED ###"
-    on_cleared:
-      then:
-        - logger.log: "### CLEARED ###"

tests/components/alarm_control_panel/test.esp32-c3.yaml

@@ -1,64 +1 @@
-binary_sensor:
+<<: !include common.yaml
-  - platform: gpio
-    id: bin1
-    pin: 1
-
-alarm_control_panel:
-  - platform: template
-    id: alarmcontrolpanel1
-    name: Alarm Panel
-    codes:
-      - "1234"
-    requires_code_to_arm: true
-    arming_home_time: 1s
-    arming_night_time: 1s
-    arming_away_time: 15s
-    pending_time: 15s
-    trigger_time: 30s
-    binary_sensors:
-      - input: bin1
-        bypass_armed_home: true
-        bypass_armed_night: true
-    on_state:
-      then:
-        - lambda: !lambda |-
-            ESP_LOGD("TEST", "State change %s", LOG_STR_ARG(alarm_control_panel_state_to_string(id(alarmcontrolpanel1)->get_state())));
-  - platform: template
-    id: alarmcontrolpanel2
-    name: Alarm Panel
-    codes:
-      - "1234"
-    requires_code_to_arm: true
-    arming_home_time: 1s
-    arming_night_time: 1s
-    arming_away_time: 15s
-    pending_time: 15s
-    trigger_time: 30s
-    binary_sensors:
-      - input: bin1
-        bypass_armed_home: true
-        bypass_armed_night: true
-    on_disarmed:
-      then:
-        - logger.log: "### DISARMED ###"
-    on_pending:
-      then:
-        - logger.log: "### PENDING ###"
-    on_arming:
-      then:
-        - logger.log: "### ARMING ###"
-    on_armed_home:
-      then:
-        - logger.log: "### ARMED HOME ###"
-    on_armed_night:
-      then:
-        - logger.log: "### ARMED NIGHT ###"
-    on_armed_away:
-      then:
-        - logger.log: "### ARMED AWAY ###"
-    on_triggered:
-      then:
-        - logger.log: "### TRIGGERED ###"
-    on_cleared:
-      then:
-        - logger.log: "### CLEARED ###"

tests/components/alarm_control_panel/test.esp32-idf.yaml

@@ -1,64 +1 @@
-binary_sensor:
+<<: !include common.yaml
-  - platform: gpio
-    id: bin1
-    pin: 1
-
-alarm_control_panel:
-  - platform: template
-    id: alarmcontrolpanel1
-    name: Alarm Panel
-    codes:
-      - "1234"
-    requires_code_to_arm: true
-    arming_home_time: 1s
-    arming_night_time: 1s
-    arming_away_time: 15s
-    pending_time: 15s
-    trigger_time: 30s
-    binary_sensors:
-      - input: bin1
-        bypass_armed_home: true
-        bypass_armed_night: true
-    on_state:
-      then:
-        - lambda: !lambda |-
-            ESP_LOGD("TEST", "State change %s", LOG_STR_ARG(alarm_control_panel_state_to_string(id(alarmcontrolpanel1)->get_state())));
-  - platform: template
-    id: alarmcontrolpanel2
-    name: Alarm Panel
-    codes:
-      - "1234"
-    requires_code_to_arm: true
-    arming_home_time: 1s
-    arming_night_time: 1s
-    arming_away_time: 15s
-    pending_time: 15s
-    trigger_time: 30s
-    binary_sensors:
-      - input: bin1
-        bypass_armed_home: true
-        bypass_armed_night: true
-    on_disarmed:
-      then:
-        - logger.log: "### DISARMED ###"
-    on_pending:
-      then:
-        - logger.log: "### PENDING ###"
-    on_arming:
-      then:
-        - logger.log: "### ARMING ###"
-    on_armed_home:
-      then:
-        - logger.log: "### ARMED HOME ###"
-    on_armed_night:
-      then:
-        - logger.log: "### ARMED NIGHT ###"
-    on_armed_away:
-      then:
-        - logger.log: "### ARMED AWAY ###"
-    on_triggered:
-      then:
-        - logger.log: "### TRIGGERED ###"
-    on_cleared:
-      then:
-        - logger.log: "### CLEARED ###"

tests/components/alarm_control_panel/test.esp32.yaml

@@ -1,64 +1 @@
-binary_sensor:
+<<: !include common.yaml
-  - platform: gpio
-    id: bin1
-    pin: 1
-
-alarm_control_panel:
-  - platform: template
-    id: alarmcontrolpanel1
-    name: Alarm Panel
-    codes:
-      - "1234"
-    requires_code_to_arm: true
-    arming_home_time: 1s
-    arming_night_time: 1s
-    arming_away_time: 15s
-    pending_time: 15s
-    trigger_time: 30s
-    binary_sensors:
-      - input: bin1
-        bypass_armed_home: true
-        bypass_armed_night: true
-    on_state:
-      then:
-        - lambda: !lambda |-
-            ESP_LOGD("TEST", "State change %s", LOG_STR_ARG(alarm_control_panel_state_to_string(id(alarmcontrolpanel1)->get_state())));
-  - platform: template
-    id: alarmcontrolpanel2
-    name: Alarm Panel
-    codes:
-      - "1234"
-    requires_code_to_arm: true
-    arming_home_time: 1s
-    arming_night_time: 1s
-    arming_away_time: 15s
-    pending_time: 15s
-    trigger_time: 30s
-    binary_sensors:
-      - input: bin1
-        bypass_armed_home: true
-        bypass_armed_night: true
-    on_disarmed:
-      then:
-        - logger.log: "### DISARMED ###"
-    on_pending:
-      then:
-        - logger.log: "### PENDING ###"
-    on_arming:
-      then:
-        - logger.log: "### ARMING ###"
-    on_armed_home:
-      then:
-        - logger.log: "### ARMED HOME ###"
-    on_armed_night:
-      then:
-        - logger.log: "### ARMED NIGHT ###"
-    on_armed_away:
-      then:
-        - logger.log: "### ARMED AWAY ###"
-    on_triggered:
-      then:
-        - logger.log: "### TRIGGERED ###"
-    on_cleared:
-      then:
-        - logger.log: "### CLEARED ###"

tests/components/alarm_control_panel/test.esp8266.yaml

@@ -1,64 +1 @@
-binary_sensor:
+<<: !include common.yaml
-  - platform: gpio
-    id: bin1
-    pin: 1
-
-alarm_control_panel:
-  - platform: template
-    id: alarmcontrolpanel1
-    name: Alarm Panel
-    codes:
-      - "1234"
-    requires_code_to_arm: true
-    arming_home_time: 1s
-    arming_night_time: 1s
-    arming_away_time: 15s
-    pending_time: 15s
-    trigger_time: 30s
-    binary_sensors:
-      - input: bin1
-        bypass_armed_home: true
-        bypass_armed_night: true
-    on_state:
-      then:
-        - lambda: !lambda |-
-            ESP_LOGD("TEST", "State change %s", LOG_STR_ARG(alarm_control_panel_state_to_string(id(alarmcontrolpanel1)->get_state())));
-  - platform: template
-    id: alarmcontrolpanel2
-    name: Alarm Panel
-    codes:
-      - "1234"
-    requires_code_to_arm: true
-    arming_home_time: 1s
-    arming_night_time: 1s
-    arming_away_time: 15s
-    pending_time: 15s
-    trigger_time: 30s
-    binary_sensors:
-      - input: bin1
-        bypass_armed_home: true
-        bypass_armed_night: true
-    on_disarmed:
-      then:
-        - logger.log: "### DISARMED ###"
-    on_pending:
-      then:
-        - logger.log: "### PENDING ###"
-    on_arming:
-      then:
-        - logger.log: "### ARMING ###"
-    on_armed_home:
-      then:
-        - logger.log: "### ARMED HOME ###"
-    on_armed_night:
-      then:
-        - logger.log: "### ARMED NIGHT ###"
-    on_armed_away:
-      then:
-        - logger.log: "### ARMED AWAY ###"
-    on_triggered:
-      then:
-        - logger.log: "### TRIGGERED ###"
-    on_cleared:
-      then:
-        - logger.log: "### CLEARED ###"

tests/components/alarm_control_panel/test.rp2040.yaml

@@ -1,64 +1 @@
-binary_sensor:
+<<: !include common.yaml
-  - platform: gpio
-    id: bin1
-    pin: 1
-
-alarm_control_panel:
-  - platform: template
-    id: alarmcontrolpanel1
-    name: Alarm Panel
-    codes:
-      - "1234"
-    requires_code_to_arm: true
-    arming_home_time: 1s
-    arming_night_time: 1s
-    arming_away_time: 15s
-    pending_time: 15s
-    trigger_time: 30s
-    binary_sensors:
-      - input: bin1
-        bypass_armed_home: true
-        bypass_armed_night: true
-    on_state:
-      then:
-        - lambda: !lambda |-
-            ESP_LOGD("TEST", "State change %s", LOG_STR_ARG(alarm_control_panel_state_to_string(id(alarmcontrolpanel1)->get_state())));
-  - platform: template
-    id: alarmcontrolpanel2
-    name: Alarm Panel
-    codes:
-      - "1234"
-    requires_code_to_arm: true
-    arming_home_time: 1s
-    arming_night_time: 1s
-    arming_away_time: 15s
-    pending_time: 15s
-    trigger_time: 30s
-    binary_sensors:
-      - input: bin1
-        bypass_armed_home: true
-        bypass_armed_night: true
-    on_disarmed:
-      then:
-        - logger.log: "### DISARMED ###"
-    on_pending:
-      then:
-        - logger.log: "### PENDING ###"
-    on_arming:
-      then:
-        - logger.log: "### ARMING ###"
-    on_armed_home:
-      then:
-        - logger.log: "### ARMED HOME ###"
-    on_armed_night:
-      then:
-        - logger.log: "### ARMED NIGHT ###"
-    on_armed_away:
-      then:
-        - logger.log: "### ARMED AWAY ###"
-    on_triggered:
-      then:
-        - logger.log: "### TRIGGERED ###"
-    on_cleared:
-      then:
-        - logger.log: "### CLEARED ###"