diff --git a/esphome/components/ebyte_lora/config.h b/esphome/components/ebyte_lora/config.h
index 5740d319c8..3c32526ca3 100644
--- a/esphome/components/ebyte_lora/config.h
+++ b/esphome/components/ebyte_lora/config.h
@@ -10,39 +10,39 @@ namespace ebyte_lora {
 enum ENABLE_BYTE { ENABLED = 0b1, DISABLED = 0b0 };
 
 enum AIR_DATA_RATE {
-  _2_4kb = 0b000,
-  _4_8kb = 0b011,
-  _9_6kb = 0b100,
-  _19_2kb = 0b101,
-  _38_4kb = 0b110,
-  _62_5kb = 0b111
+  AIR_2_4kb = 0b000,
+  AIR_4_8kb = 0b011,
+  AIR_9_6kb = 0b100,
+  AIR_19_2kb = 0b101,
+  AIR_38_4kb = 0b110,
+  AIR_62_5kb = 0b111
 };
 enum UART_BPS_SPEED {
-  _1200 = 0b000,
-  _2400 = 0b001,
-  _4800 = 0b010,
-  _9600 = 0b011,
-  _19200 = 0b100,
-  _38400 = 0b101,
-  _57600 = 0b110,
-  _115200 = 0b111
+  UART_1200 = 0b000,
+  UART_2400 = 0b001,
+  UART_4800 = 0b010,
+  UART_9600 = 0b011,
+  UART_19200 = 0b100,
+  UART_38400 = 0b101,
+  UART_57600 = 0b110,
+  UART_115200 = 0b111
 };
-enum UART_PARITY { _8N1 = 0b00, _8O1 = 0b01, _8E1 = 0b10 };
+enum UART_PARITY_SETTING { EBYTE_UART_8N1 = 0b00, EBYTE_UART_8O1 = 0b01, EBYTE_UART_8E1 = 0b10 };
 struct REG0 {
   uint8_t air_data_rate : 3;
   std::string air_data_rate_description_() {
     switch (this->air_data_rate) {
-      case _2_4kb:
+      case AIR_2_4kb:
         return "air_data_rate: 2.4kb";
-      case _4_8kb:
+      case AIR_4_8kb:
         return "air_data_rate: 4.8kb";
-      case _9_6kb:
+      case AIR_9_6kb:
         return "air_data_rate: 9.6kb";
-      case _19_2kb:
+      case AIR_19_2kb:
         return "air_data_rate: 19.2kb";
-      case _38_4kb:
+      case AIR_38_4kb:
         return "air_data_rate: 38.4kb";
-      case _62_5kb:
+      case AIR_62_5kb:
         return "air_data_rate: 62.5kb";
       default:
         return "";
@@ -51,11 +51,11 @@ struct REG0 {
   uint8_t parity : 2;
   std::string parity_description_() {
     switch (this->parity) {
-      case _8N1:
+      case EBYTE_UART_8N1:
         return "uart_parity: 8N1";
-      case _8O1:
+      case EBYTE_UART_8O1:
         return "uart_parity: 8O1";
-      case _8E1:
+      case EBYTE_UART_8E1:
         return "uart_parity: 8E1";
       default:
         return "";
@@ -64,21 +64,21 @@ struct REG0 {
   uint8_t uart_baud : 3;
   std::string uart_baud_description_() {
     switch (this->uart_baud) {
-      case _1200:
+      case UART_1200:
         return "uart_baud: 1200";
-      case _2400:
+      case UART_2400:
         return "uart_baud: 2400";
-      case _4800:
+      case UART_4800:
         return "uart_baud: 4800";
-      case _9600:
+      case UART_9600:
         return "uart_baud: 9600";
-      case _19200:
+      case UART_19200:
         return "uart_baud: 19200";
-      case _38400:
+      case UART_38400:
         return "uart_baud: 38400";
-      case _57600:
+      case UART_57600:
         return "uart_baud: 57600";
-      case _115200:
+      case UART_115200:
         return "uart_baud: 115200";
       default:
         return "";
@@ -86,25 +86,25 @@ struct REG0 {
   }
 };
 enum TRANSMISSION_POWER {
-  _DEFAULT_MAX = 0b00,
-  _LOWER = 0b01,
-  _EVEN_LOWER = 0b10,
-  _LOWEST = 0b11
+  TX_DEFAULT_MAX = 0b00,
+  TX_LOWER = 0b01,
+  TX_EVEN_LOWER = 0b10,
+  TX_LOWEST = 0b11
 
 };
-enum SUB_PACKET_SETTING { _200b = 0b00, _128b = 0b01, _64b = 0b10, _32b = 0b11 };
+enum SUB_PACKET_SETTING { SUB_200b = 0b00, SUB_128b = 0b01, SUB_64b = 0b10, SUB_32b = 0b11 };
 // again in reverse order on the data sheet
 struct REG1 {
   uint8_t transmission_power : 2;
   std::string transmission_power_description_() {
     switch (this->transmission_power) {
-      case _DEFAULT_MAX:
+      case TX_DEFAULT_MAX:
         return "transmission_power: default or max";
-      case _LOWER:
+      case TX_LOWER:
         return "transmission_power: lower";
-      case _EVEN_LOWER:
+      case TX_EVEN_LOWER:
         return "transmission_power: even lower";
-      case _LOWEST:
+      case TX_LOWEST:
         return "transmission_power: Lowest";
       default:
         return "";
@@ -125,16 +125,16 @@ struct REG1 {
   uint8_t sub_packet : 2;
   std::string sub_packet_description_() {
     switch (this->sub_packet) {
-      case _200b:
+      case SUB_200b:
         return "sub_packet: 200 bytes";
 
-      case _128b:
+      case SUB_128b:
         return "sub_packet: 128 bytes";
 
-      case _64b:
+      case SUB_64b:
         return "sub_packet: 64 bytes";
 
-      case _32b:
+      case SUB_32b:
         return "sub_packet: 32 bytes";
       default:
         return "";
@@ -143,14 +143,14 @@ struct REG1 {
 };
 enum TRANSMISSION_MODE { TRANSPARENT = 0b0, FIXED = 0b1 };
 enum WOR_PERIOD {
-  _500 = 0b000,
-  _1000 = 0b001,
-  _1500 = 0b010,
-  _2000 = 0b011,
-  _2500 = 0b100,
-  _3000 = 0b101,
-  _3500 = 0b110,
-  _4000 = 0b111
+  WOR_500 = 0b000,
+  WOR_1000 = 0b001,
+  WOR_1500 = 0b010,
+  WOR_2000 = 0b011,
+  WOR_2500 = 0b100,
+  WOR_3000 = 0b101,
+  WOR_3500 = 0b110,
+  WOR_4000 = 0b111
 
 };
 // reverse order on the data sheet
@@ -158,28 +158,21 @@ struct REG3 {
   uint8_t wor_period : 3;
   std::string wor_period_description_() {
     switch (this->wor_period) {
-      case _500:
+      case WOR_500:
         return "wor_period: 500";
-
-      case _1000:
+      case WOR_1000:
         return "wor_period: 1000";
-
-      case _1500:
+      case WOR_1500:
         return "wor_period: 1500";
-
-      case _2000:
+      case WOR_2000:
         return "wor_period: 2000";
-
-      case _2500:
+      case WOR_2500:
         return "wor_period: 2500";
-
-      case _3000:
+      case WOR_3000:
         return "wor_period: 3000";
-
-      case _3500:
+      case WOR_3500:
         return "wor_period: 3500";
-
-      case _4000:
+      case WOR_4000:
         return "wor_period: 4000";
       default:
         return "";
@@ -191,10 +184,8 @@ struct REG3 {
     switch (this->enable_lbt) {
       case ENABLED:
         return "enable_lbt: ENABLED";
-
       case DISABLED:
         return "enable_lbt: DISABLED";
-
       default:
     }
   }