From 531428b8b0415eb2a854d068a3f050fa1b70c73d Mon Sep 17 00:00:00 2001
From: Brandon Davidson <brad@oatmail.org>
Date: Thu, 14 Nov 2019 04:36:55 -0800
Subject: [PATCH] Fix logger uart conflict check (#858)

* Fix logger uart conflict check

* Fix class for check func

* Fix syntax

Hope lint is OK with moving the end of the conditional outside the #IFDEF

* Move end of conditional inside ifdef and remove extra whitespace

* Simplify

clang-format did not like the ifdefs and was reformatting in a way that killed clang-tidy.

Simple solution is to use logger's hw_serial as source of truth

Also simplifies the code - uart doesn't need to know what the logger uart settings mean
---
 esphome/components/logger/logger.h |  1 +
 esphome/components/uart/uart.cpp   | 28 +++++++++++++++-------------
 esphome/components/uart/uart.h     |  1 +
 3 files changed, 17 insertions(+), 13 deletions(-)

diff --git a/esphome/components/logger/logger.h b/esphome/components/logger/logger.h
index b8a252c7bd..b9be7f3f1d 100644
--- a/esphome/components/logger/logger.h
+++ b/esphome/components/logger/logger.h
@@ -31,6 +31,7 @@ class Logger : public Component {
   /// Manually set the baud rate for serial, set to 0 to disable.
   void set_baud_rate(uint32_t baud_rate);
   uint32_t get_baud_rate() const { return baud_rate_; }
+  HardwareSerial *get_hw_serial() const { return hw_serial_; }
 
   /// Get the UART used by the logger.
   UARTSelection get_uart() const;
diff --git a/esphome/components/uart/uart.cpp b/esphome/components/uart/uart.cpp
index 3284d4cb67..1f40498606 100644
--- a/esphome/components/uart/uart.cpp
+++ b/esphome/components/uart/uart.cpp
@@ -46,12 +46,7 @@ void UARTComponent::dump_config() {
   }
   ESP_LOGCONFIG(TAG, "  Baud Rate: %u baud", this->baud_rate_);
   ESP_LOGCONFIG(TAG, "  Stop bits: %u", this->stop_bits_);
-#ifdef USE_LOGGER
-  if (this->hw_serial_ == &Serial && logger::global_logger->get_baud_rate() != 0) {
-    ESP_LOGW(TAG, "  You're using the same serial port for logging and the UART component. Please "
-                  "disable logging over the serial port by setting logger->baud_rate to 0.");
-  }
-#endif
+  this->check_logger_conflict_();
 }
 
 void UARTComponent::write_byte(uint8_t data) {
@@ -156,13 +151,7 @@ void UARTComponent::dump_config() {
   } else {
     ESP_LOGCONFIG(TAG, "  Using software serial");
   }
-
-#ifdef USE_LOGGER
-  if (this->hw_serial_ == &Serial && logger::global_logger->get_baud_rate() != 0) {
-    ESP_LOGW(TAG, "  You're using the same serial port for logging and the UART component. Please "
-                  "disable logging over the serial port by setting logger->baud_rate to 0.");
-  }
-#endif
+  this->check_logger_conflict_();
 }
 
 void UARTComponent::write_byte(uint8_t data) {
@@ -378,6 +367,19 @@ int UARTComponent::peek() {
   return data;
 }
 
+void UARTComponent::check_logger_conflict_() {
+#ifdef USE_LOGGER
+  if (this->hw_serial_ == nullptr || logger::global_logger->get_baud_rate() == 0) {
+    return;
+  }
+
+  if (this->hw_serial_ == logger::global_logger->get_hw_serial()) {
+    ESP_LOGW(TAG, "  You're using the same serial port for logging and the UART component. Please "
+                  "disable logging over the serial port by setting logger->baud_rate to 0.");
+  }
+#endif
+}
+
 void UARTDevice::check_uart_settings(uint32_t baud_rate, uint8_t stop_bits) {
   if (this->parent_->baud_rate_ != baud_rate) {
     ESP_LOGE(TAG, "  Invalid baud_rate: Integration requested baud_rate %u but you have %u!", baud_rate,
diff --git a/esphome/components/uart/uart.h b/esphome/components/uart/uart.h
index 0e92fed0dc..76e7496b80 100644
--- a/esphome/components/uart/uart.h
+++ b/esphome/components/uart/uart.h
@@ -76,6 +76,7 @@ class UARTComponent : public Component, public Stream {
   void set_stop_bits(uint8_t stop_bits) { this->stop_bits_ = stop_bits; }
 
  protected:
+  void check_logger_conflict_();
   bool check_read_timeout_(size_t len = 1);
   friend class UARTDevice;