From 60840a02860440aec71d4ac3a029da1ed2fb77a0 Mon Sep 17 00:00:00 2001 From: oarcher Date: Sat, 15 Jun 2024 00:44:50 +0200 Subject: [PATCH] new test --- tests/components/modem/test.esp32-idf.yaml | 13 + tests/test5.1.yaml | 746 --------------------- 2 files changed, 13 insertions(+), 746 deletions(-) create mode 100644 tests/components/modem/test.esp32-idf.yaml delete mode 100644 tests/test5.1.yaml diff --git a/tests/components/modem/test.esp32-idf.yaml b/tests/components/modem/test.esp32-idf.yaml new file mode 100644 index 0000000000..92b689b198 --- /dev/null +++ b/tests/components/modem/test.esp32-idf.yaml @@ -0,0 +1,13 @@ +binary_sensor: + - platform: template + id: modem_ready + +modem: + ready: modem_ready + rx_pin: 26 + tx_pin: 27 + model: SIM7600 + apn: orange + username: orange + password: orange + pin_code: "0000" diff --git a/tests/test5.1.yaml b/tests/test5.1.yaml deleted file mode 100644 index 979a113cd6..0000000000 --- a/tests/test5.1.yaml +++ /dev/null @@ -1,746 +0,0 @@ ---- -# copy of test5.yaml with modem network -esphome: - name: test5-1 - build_path: build/test5-1 - project: - name: esphome.test5_1_project - version: "1.0.0" - -esp32: - board: nodemcu-32s - framework: - type: esp-idf - -modem: - ready: modem_ready - rx_pin: 26 - tx_pin: 27 - model: SIM7600 - apn: orange - username: orange - password: orange - pin_code: "0000" - -logger: - -debug: - -psram: - -uart: - - id: uart_1 - tx_pin: 1 - rx_pin: 3 - baud_rate: 9600 - - id: uart_2 - tx_pin: - allow_other_uses: true - number: 17 - inverted: true - rx_pin: - allow_other_uses: true - number: 16 - baud_rate: 19200 - -i2c: - sda: - allow_other_uses: true - number: 21 - scl: - number: 22 - frequency: 100khz - -modbus: - uart_id: uart_1 - flow_control_pin: - allow_other_uses: true - number: 5 - id: mod_bus1 - -modbus_controller: - - id: modbus_controller_test - address: 0x2 - modbus_id: mod_bus1 - -mqtt: - broker: test.mosquitto.org - port: 1883 - discovery: true - discovery_prefix: homeassistant - idf_send_async: false - log_topic: - on_message: - topic: testing/sensor/testing_sensor/state - qos: 0 - then: - # yamllint disable rule:line-length - - lambda: |- - ESP_LOGD("Mqtt Test", "testing/sensor/testing_sensor/state=[%s]", x.c_str()); - # yamllint enable rule:line-length - -vbus: - - uart_id: uart_2 - -binary_sensor: - - platform: template - id: modem_ready - - - platform: gpio - pin: GPIO0 - id: io0_button - icon: mdi:gesture-tap-button - - - platform: modbus_controller - modbus_controller_id: modbus_controller_test - id: modbus_binsensortest - register_type: read - address: 0x3200 - bitmask: 0x80 # (bit 8) - lambda: "return x;" - - - platform: tm1638 - id: Button0 - key: 0 - filters: - - delayed_on: 10ms - on_press: - then: - - switch.turn_on: Led0 - on_release: - then: - - switch.turn_off: Led0 - - - platform: tm1638 - id: Button1 - key: 1 - on_press: - then: - - switch.turn_on: Led1 - on_release: - then: - - switch.turn_off: Led1 - - - platform: tm1638 - id: Button2 - key: 2 - on_press: - then: - - switch.turn_on: Led2 - on_release: - then: - - switch.turn_off: Led2 - - - platform: tm1638 - id: Button3 - key: 3 - on_press: - then: - - switch.turn_on: Led3 - on_release: - then: - - switch.turn_off: Led3 - - - platform: tm1638 - id: Button4 - key: 4 - on_press: - then: - - output.turn_on: Led4 - on_release: - then: - - output.turn_off: Led4 - - - platform: tm1638 - id: Button5 - key: 5 - on_press: - then: - - output.turn_on: Led5 - on_release: - then: - - output.turn_off: Led5 - - - platform: tm1638 - id: Button6 - key: 6 - on_press: - then: - - output.turn_on: Led6 - on_release: - then: - - output.turn_off: Led6 - - - platform: tm1638 - id: Button7 - key: 7 - on_press: - then: - - output.turn_on: Led7 - on_release: - then: - - output.turn_off: Led7 - - - platform: gpio - id: sn74hc165_pin_0 - pin: - sn74hc165: sn74hc165_hub - number: 0 - - - platform: ezo_pmp - pump_state: - name: "Pump State" - is_paused: - name: "Is Paused" - - - platform: matrix_keypad - keypad_id: keypad - id: key4 - row: 1 - col: 1 - - platform: matrix_keypad - id: key1 - key: 1 - - - platform: vbus - model: deltasol_bs_plus - relay2: - name: Relay 2 On - sensor1_error: - name: Sensor 1 Error - - - platform: vbus - model: custom - command: 0x100 - source: 0x1234 - dest: 0x10 - binary_sensors: - - id: vcustom_b - name: VBus Custom Binary Sensor - lambda: return x[0] & 1; - -tlc5947: - data_pin: - number: GPIO12 - allow_other_uses: true - clock_pin: - allow_other_uses: true - number: GPIO14 - lat_pin: - allow_other_uses: true - number: GPIO15 - -gp8403: - - id: gp8403_5v - voltage: 5V - - id: gp8403_10v - voltage: 10V - -output: - - platform: gpio - pin: GPIO2 - id: built_in_led - - - platform: tlc5947 - id: output_red - channel: 0 - max_power: 0.8 - - - platform: mcp47a1 - id: output_mcp47a1 - - - platform: modbus_controller - modbus_controller_id: modbus_controller_test - id: modbus_output_test - lambda: |- - return x * 1.0 ; - address: 0x9001 - value_type: U_WORD - - - platform: tm1638 - id: Led4 - led: 4 - - - platform: tm1638 - id: Led5 - led: 5 - - - platform: tm1638 - id: Led6 - led: 6 - - - platform: tm1638 - id: Led7 - led: 7 - - - platform: gp8403 - id: gp8403_output_0 - gp8403_id: gp8403_5v - channel: 0 - - platform: gp8403 - gp8403_id: gp8403_10v - id: gp8403_output_1 - channel: 1 - -demo: - -esp32_ble: - -esp32_ble_server: - manufacturer: ESPHome - model: Test5 - -ezo_pmp: - id: hcl_pump - update_interval: 1s - -number: - - platform: template - name: My template number - id: template_number_id - optimistic: true - max_value: 100 - min_value: 0 - step: 5 - unit_of_measurement: "%" - mode: slider - device_class: humidity - on_value: - - logger.log: - format: Number changed to %f - args: [x] - set_action: - - logger.log: - format: Template Number set to %f - args: [x] - - number.set: - id: template_number_id - value: 50 - - number.to_min: template_number_id - - number.to_min: - id: template_number_id - - number.to_max: template_number_id - - number.to_max: - id: template_number_id - - number.increment: template_number_id - - number.increment: - id: template_number_id - cycle: false - - number.decrement: template_number_id - - number.decrement: - id: template_number_id - cycle: false - - number.operation: - id: template_number_id - operation: Increment - cycle: false - - number.operation: - id: template_number_id - operation: !lambda "return NUMBER_OP_INCREMENT;" - cycle: !lambda "return false;" - - - id: modbus_numbertest - platform: modbus_controller - modbus_controller_id: modbus_controller_test - name: ModbusNumber - address: 0x9002 - value_type: U_WORD - lambda: "return x * 1.0;" - write_lambda: |- - return x * 1.0 ; - multiply: 1.0 - -select: - - platform: template - name: My template select - id: template_select_id - optimistic: true - initial_option: two - restore_value: true - on_value: - - logger.log: - format: Select changed to %s (index %d)" - args: ["x.c_str()", "i"] - set_action: - - logger.log: - format: Template Select set to %s - args: ["x.c_str()"] - - select.set: - id: template_select_id - option: two - - select.first: template_select_id - - select.last: - id: template_select_id - - select.previous: template_select_id - - select.next: - id: template_select_id - cycle: false - - select.operation: - id: template_select_id - operation: Previous - cycle: false - - select.operation: - id: template_select_id - operation: !lambda "return SELECT_OP_PREVIOUS;" - cycle: !lambda "return true;" - - select.set_index: - id: template_select_id - index: 1 - - select.set_index: - id: template_select_id - index: !lambda "return 1 + 1;" - options: - - one - - two - - three - - - platform: modbus_controller - name: Modbus Select Register 1000 - address: 1000 - value_type: U_WORD - optionsmap: - "Zero": 0 - "One": 1 - "Two": 2 - "Three": 3 - -sensor: - - platform: adc - id: adc_sensor_p32 - name: ADC pin 32 - pin: 32 - attenuation: 11db - update_interval: 1s - - platform: internal_temperature - name: Internal Temperature - state_topic: - - platform: selec_meter - total_active_energy: - name: SelecEM2M Total Active Energy - import_active_energy: - name: SelecEM2M Import Active Energy - export_active_energy: - name: SelecEM2M Export Active Energy - total_reactive_energy: - name: SelecEM2M Total Reactive Energy - import_reactive_energy: - name: SelecEM2M Import Reactive Energy - export_reactive_energy: - name: SelecEM2M Export Reactive Energy - apparent_energy: - name: SelecEM2M Apparent Energy - active_power: - name: SelecEM2M Active Power - reactive_power: - name: SelecEM2M Reactive Power - apparent_power: - name: SelecEM2M Apparent Power - voltage: - name: SelecEM2M Voltage - current: - name: SelecEM2M Current - power_factor: - name: SelecEM2M Power Factor - frequency: - name: SelecEM2M Frequency - maximum_demand_active_power: - name: SelecEM2M Maximum Demand Active Power - disabled_by_default: true - maximum_demand_reactive_power: - name: SelecEM2M Maximum Demand Reactive Power - disabled_by_default: true - maximum_demand_apparent_power: - name: SelecEM2M Maximum Demand Apparent Power - disabled_by_default: true - - - id: modbus_sensortest - platform: modbus_controller - modbus_controller_id: modbus_controller_test - address: 0x331A - register_type: read - value_type: U_WORD - - - platform: t6615 - uart_id: uart_2 - co2: - name: CO2 Sensor - - - platform: bmp3xx_i2c - temperature: - name: BMP Temperature - oversampling: 16x - pressure: - name: BMP Pressure - address: 0x77 - iir_filter: 2X - - - platform: ms8607 - temperature: - name: Temperature - humidity: - name: Humidity - pressure: - name: Pressure - - platform: ms8607 - id: ms8607_more_config - temperature: - name: Indoor Temperature - accuracy_decimals: 1 - pressure: - name: Indoor Pressure - internal: true - humidity: - name: Indoor Humidity - address: 0x41 - i2c_id: - i2c_id: - address: 0x77 - update_interval: 10min - - - platform: sen5x - id: sen54 - temperature: - name: Temperature - accuracy_decimals: 1 - humidity: - name: Humidity - accuracy_decimals: 0 - pm_1_0: - name: PM <1µm Weight concentration - id: pm_1_0 - accuracy_decimals: 1 - pm_2_5: - name: PM <2.5µm Weight concentration - id: pm_2_5 - accuracy_decimals: 1 - pm_4_0: - name: PM <4µm Weight concentration - id: pm_4_0 - accuracy_decimals: 1 - pm_10_0: - name: PM <10µm Weight concentration - id: pm_10_0 - accuracy_decimals: 1 - nox: - name: NOx - voc: - name: VOC - algorithm_tuning: - index_offset: 100 - learning_time_offset_hours: 12 - learning_time_gain_hours: 12 - gating_max_duration_minutes: 180 - std_initial: 50 - gain_factor: 230 - temperature_compensation: - offset: 0 - normalized_offset_slope: 0 - time_constant: 0 - auto_cleaning_interval: 604800s - acceleration_mode: low - store_baseline: true - address: 0x69 - - platform: mcp9600 - thermocouple_type: K - hot_junction: - name: Thermocouple Temperature - cold_junction: - name: Ambient Temperature - - - platform: ezo_pmp - current_volume_dosed: - name: Current Volume Dosed - total_volume_dosed: - name: Total Volume Dosed - absolute_total_volume_dosed: - name: Absolute Total Volume Dosed - pump_voltage: - name: Pump Voltage - last_volume_requested: - name: Last Volume Requested - max_flow_rate: - name: Max Flow Rate - - - platform: vbus - model: deltasol c - temperature_3: - name: Temperature 3 - operating_hours_1: - name: Operating Hours 1 - heat_quantity: - name: Heat Quantity - time: - name: System Time - - - platform: debug - free: - name: "Heap Free" - block: - name: "Heap Max Block" - loop_time: - name: "Loop Time" - psram: - name: "PSRAM Free" - - - platform: vbus - model: custom - command: 0x100 - source: 0x1234 - dest: 0x10 - sensors: - - id: vcustom - name: VBus Custom Sensor - lambda: return x[0] / 10.0; - - - platform: kuntze - ph: - name: Kuntze pH - temperature: - name: Kuntze temperature - -script: - - id: automation_test - then: - - repeat: - count: 5 - then: - - logger.log: looping! - - - id: zero_repeat_test - then: - - repeat: - count: !lambda "return 0;" - then: - - logger.log: shouldn't see me! - -switch: - - platform: modbus_controller - modbus_controller_id: modbus_controller_test - id: modbus_switch_test - register_type: coil - address: 2 - bitmask: 1 - - - platform: tm1638 - id: Led0 - led: 0 - name: TM1638Led0 - - - platform: tm1638 - id: Led1 - led: 1 - name: TM1638Led1 - - - platform: tm1638 - id: Led2 - led: 2 - name: TM1638Led2 - - - platform: tm1638 - id: Led3 - led: 3 - name: TM1638Led3 - -display: - - platform: tm1638 - id: primarydisplay - stb_pin: - allow_other_uses: true - number: 5 # TM1638 STB - clk_pin: 18 # TM1638 CLK - dio_pin: 23 # TM1638 DIO - update_interval: 5s - intensity: 5 - lambda: |- - it.print("81818181"); - -time: - - platform: pcf85063 - - platform: pcf8563 - -text_sensor: - - platform: ezo_pmp - dosing_mode: - name: Dosing Mode - calibration_status: - name: Calibration Status - on_value: - - ezo_pmp.dose_volume: - id: hcl_pump - volume: 10 - - ezo_pmp.dose_volume_over_time: - id: hcl_pump - volume: 10 - duration: 2 - - ezo_pmp.dose_with_constant_flow_rate: - id: hcl_pump - volume_per_minute: 10 - duration: 2 - - ezo_pmp.set_calibration_volume: - id: hcl_pump - volume: 10 - - ezo_pmp.find: hcl_pump - - ezo_pmp.dose_continuously: hcl_pump - - ezo_pmp.clear_total_volume_dosed: hcl_pump - - ezo_pmp.clear_calibration: hcl_pump - - ezo_pmp.pause_dosing: hcl_pump - - ezo_pmp.stop_dosing: hcl_pump - - ezo_pmp.arbitrary_command: - id: hcl_pump - command: D,? - -sn74hc165: - id: sn74hc165_hub - data_pin: - allow_other_uses: true - number: GPIO12 - clock_pin: - allow_other_uses: true - number: GPIO14 - load_pin: GPIO27 - clock_inhibit_pin: GPIO26 - sr_count: 4 - -matrix_keypad: - id: keypad - rows: - - pin: - allow_other_uses: true - number: 21 - - pin: 19 - columns: - - pin: - allow_other_uses: true - number: 17 - - pin: - allow_other_uses: true - number: 16 - keys: "1234" - has_pulldowns: true - -key_collector: - - id: reader - source_id: keypad - min_length: 4 - max_length: 4 - -light: - - platform: esp32_rmt_led_strip - id: led_strip - pin: 13 - num_leds: 60 - rmt_channel: 6 - rgb_order: GRB - chipset: ws2812 - - platform: esp32_rmt_led_strip - id: led_strip2 - pin: - allow_other_uses: true - number: 15 - num_leds: 60 - rmt_channel: 2 - rgb_order: RGB - bit0_high: 100us - bit0_low: 100us - bit1_high: 100us - bit1_low: 100us