Remove unused polling_component_schema from modbus number (#3108)

esphome/components/modbus_controller/number/__init__.py

@@ -58,8 +58,7 @@ def validate_modbus_number(config):
 
 
 CONFIG_SCHEMA = cv.All(
-    number.NUMBER_SCHEMA.extend(ModbusItemBaseSchema)
-    .extend(
+    number.NUMBER_SCHEMA.extend(ModbusItemBaseSchema).extend(
         {
             cv.GenerateID(): cv.declare_id(ModbusNumber),
             cv.Optional(CONF_VALUE_TYPE, default="U_WORD"): cv.enum(SENSOR_VALUE_TYPE),
@@ -72,8 +71,7 @@ CONFIG_SCHEMA = cv.All(
             cv.Optional(CONF_MULTIPLY, default=1.0): cv.float_,
             cv.Optional(CONF_USE_WRITE_MULTIPLE, default=False): cv.boolean,
         }
-    )
-    .extend(cv.polling_component_schema("60s")),
+    ),
     validate_min_max,
     validate_modbus_number,
 )

tests/test5.yaml

@@ -14,8 +14,8 @@ esp32:
 
 wifi:
   networks:
-    - ssid: 'MySSID'
-      password: 'password1'
+    - ssid: "MySSID"
+      password: "password1"
       manual_ip:
         static_ip: 192.168.1.23
         gateway: 192.168.1.1
@@ -39,7 +39,6 @@ uart:
 
 i2c:
 
-
 modbus:
   uart_id: uart1
   flow_control_pin: 5
@@ -50,13 +49,20 @@ modbus_controller:
     address: 0x2
     modbus_id: mod_bus1
 
-
 binary_sensor:
   - platform: gpio
     pin: GPIO0
     id: io0_button
     icon: mdi:gesture-tap-button
 
+  - platform: modbus_controller
+    modbus_controller_id: modbus_controller_test
+    id: modbus_binsensortest
+    register_type: read
+    address: 0x3200
+    bitmask: 0x80 #(bit 8)
+    lambda: !lambda "{ return x ;}"
+
 tlc5947:
   data_pin: GPIO12
   clock_pin: GPIO14
@@ -75,6 +81,14 @@ output:
   - platform: mcp47a1
     id: output_mcp47a1
 
+  - platform: modbus_controller
+    modbus_controller_id: modbus_controller_test
+    id: modbus_output_test
+    lambda: |-
+      return x * 1.0 ;
+    address: 0x9001
+    value_type: U_WORD
+
 demo:
 
 esp32_ble:
@@ -104,9 +118,20 @@ number:
     max_value: 100
     min_value: 0
     step: 5
-    unit_of_measurement: '%'
+    unit_of_measurement: "%"
     mode: slider
 
+  - id: modbus_numbertest
+    platform: modbus_controller
+    modbus_controller_id: modbus_controller_test
+    name: "ModbusNumber"
+    address: 0x9002
+    value_type: U_WORD
+    lambda: "return  x * 1.0; "
+    write_lambda: |-
+      return x * 1.0 ;
+    multiply: 1.0
+
 select:
   - platform: template
     name: My template select
@@ -170,8 +195,7 @@ sensor:
       name: "SelecEM2M Maximum Demand Apparent Power"
       disabled_by_default: true
 
-  - id: battery_voltage
-    name: "Battery voltage2"
+  - id: modbus_sensortest
     platform: modbus_controller
     modbus_controller_id: modbus_controller_test
     address: 0x331A
@@ -200,6 +224,14 @@ script:
           then:
             - logger.log: "looping!"
 
+switch:
+  - platform: modbus_controller
+    modbus_controller_id: modbus_controller_test
+    id: modbus_switch_test
+    register_type: coil
+    address: 2
+    bitmask: 1
+
 ektf2232:
   interrupt_pin: GPIO36
   rts_pin: GPIO5