diff --git a/esphome/components/haier/binary_sensor/__init__.py b/esphome/components/haier/binary_sensor/__init__.py
new file mode 100644
index 0000000000..4f72560a7b
--- /dev/null
+++ b/esphome/components/haier/binary_sensor/__init__.py
@@ -0,0 +1,70 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import binary_sensor
+from esphome.const import (
+    ENTITY_CATEGORY_DIAGNOSTIC,
+    ICON_FAN,
+    ICON_RADIATOR,
+)
+from ..climate import (
+    CONF_HAIER_ID,
+    HonClimate,
+)
+
+BinarySensorTypeEnum = HonClimate.enum("SubBinarySensorType", True)
+
+# Haier sensors
+CONF_OUTDOOR_FAN_STATUS = "outdoor_fan_status"
+CONF_DEFROST_STATUS = "defrost_status"
+CONF_COMPRESSOR_STATUS = "compressor_status"
+CONF_INDOOR_FAN_STATUS = "indoor_fan_status"
+CONF_FOUR_WAY_VALVE_STATUS = "four_way_valve_status"
+CONF_INDOOR_ELECTRIC_HEATING_STATUS = "indoor_electric_heating_status"
+
+# Additional icons
+ICON_SNOWFLAKE_THERMOMETER = "mdi:snowflake-thermometer"
+ICON_HVAC = "mdi:hvac"
+ICON_VALVE = "mdi:valve"
+
+SENSOR_TYPES = {
+    CONF_OUTDOOR_FAN_STATUS: binary_sensor.binary_sensor_schema(
+        icon=ICON_FAN,
+        entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+    ),
+    CONF_DEFROST_STATUS: binary_sensor.binary_sensor_schema(
+        icon=ICON_SNOWFLAKE_THERMOMETER,
+        entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+    ),
+    CONF_COMPRESSOR_STATUS: binary_sensor.binary_sensor_schema(
+        icon=ICON_HVAC,
+        entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+    ),
+    CONF_INDOOR_FAN_STATUS: binary_sensor.binary_sensor_schema(
+        icon=ICON_FAN,
+        entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+    ),
+    CONF_FOUR_WAY_VALVE_STATUS: binary_sensor.binary_sensor_schema(
+        icon=ICON_VALVE,
+        entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+    ),
+    CONF_INDOOR_ELECTRIC_HEATING_STATUS: binary_sensor.binary_sensor_schema(
+        icon=ICON_RADIATOR,
+        entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+    ),
+}
+
+CONFIG_SCHEMA = cv.Schema(
+    {
+        cv.Required(CONF_HAIER_ID): cv.use_id(HonClimate),
+    }
+).extend({cv.Optional(type): schema for type, schema in SENSOR_TYPES.items()})
+
+
+async def to_code(config):
+    paren = await cg.get_variable(config[CONF_HAIER_ID])
+
+    for type, _ in SENSOR_TYPES.items():
+        if conf := config.get(type):
+            sens = await binary_sensor.new_binary_sensor(conf)
+            binary_sensor_type = getattr(BinarySensorTypeEnum, type.upper())
+            cg.add(paren.set_sub_binary_sensor(binary_sensor_type, sens))
diff --git a/esphome/components/haier/climate.py b/esphome/components/haier/climate.py
index 1cb8773495..a700be8be2 100644
--- a/esphome/components/haier/climate.py
+++ b/esphome/components/haier/climate.py
@@ -2,7 +2,7 @@
 import esphome.codegen as cg
 import esphome.config_validation as cv
 import esphome.final_validate as fv
-from esphome.components import uart, sensor, climate, logger
+from esphome.components import uart, climate, logger
 from esphome import automation
 from esphome.const import (
     CONF_BEEPER,
@@ -21,10 +21,6 @@ from esphome.const import (
     CONF_TRIGGER_ID,
     CONF_VISUAL,
     CONF_WIFI,
-    DEVICE_CLASS_TEMPERATURE,
-    ICON_THERMOMETER,
-    STATE_CLASS_MEASUREMENT,
-    UNIT_CELSIUS,
 )
 from esphome.components.climate import (
     ClimateMode,
@@ -42,7 +38,6 @@ PROTOCOL_CURRENT_TEMPERATURE_STEP = 0.5
 PROTOCOL_CONTROL_PACKET_SIZE = 10
 
 CODEOWNERS = ["@paveldn"]
-AUTO_LOAD = ["sensor"]
 DEPENDENCIES = ["climate", "uart"]
 CONF_ALTERNATIVE_SWING_CONTROL = "alternative_swing_control"
 CONF_ANSWER_TIMEOUT = "answer_timeout"
@@ -58,7 +53,6 @@ CONF_WIFI_SIGNAL = "wifi_signal"
 
 PROTOCOL_HON = "HON"
 PROTOCOL_SMARTAIR2 = "SMARTAIR2"
-PROTOCOLS_SUPPORTED = [PROTOCOL_HON, PROTOCOL_SMARTAIR2]
 
 haier_ns = cg.esphome_ns.namespace("haier")
 HaierClimateBase = haier_ns.class_(
@@ -67,6 +61,7 @@ HaierClimateBase = haier_ns.class_(
 HonClimate = haier_ns.class_("HonClimate", HaierClimateBase)
 Smartair2Climate = haier_ns.class_("Smartair2Climate", HaierClimateBase)
 
+CONF_HAIER_ID = "haier_id"
 
 AirflowVerticalDirection = haier_ns.enum("AirflowVerticalDirection", True)
 AIRFLOW_VERTICAL_DIRECTION_OPTIONS = {
@@ -239,12 +234,8 @@ CONFIG_SCHEMA = cv.All(
                     ): cv.ensure_list(
                         cv.enum(SUPPORTED_CLIMATE_PRESETS_HON_OPTIONS, upper=True)
                     ),
-                    cv.Optional(CONF_OUTDOOR_TEMPERATURE): sensor.sensor_schema(
-                        unit_of_measurement=UNIT_CELSIUS,
-                        icon=ICON_THERMOMETER,
-                        accuracy_decimals=0,
-                        device_class=DEVICE_CLASS_TEMPERATURE,
-                        state_class=STATE_CLASS_MEASUREMENT,
+                    cv.Optional(CONF_OUTDOOR_TEMPERATURE): cv.invalid(
+                        f"The {CONF_OUTDOOR_TEMPERATURE} option is deprecated, use a sensor for a haier platform instead"
                     ),
                     cv.Optional(CONF_ON_ALARM_START): automation.validate_automation(
                         {
@@ -463,9 +454,6 @@ async def to_code(config):
         cg.add(var.set_beeper_state(config[CONF_BEEPER]))
     if CONF_DISPLAY in config:
         cg.add(var.set_display_state(config[CONF_DISPLAY]))
-    if CONF_OUTDOOR_TEMPERATURE in config:
-        sens = await sensor.new_sensor(config[CONF_OUTDOOR_TEMPERATURE])
-        cg.add(var.set_outdoor_temperature_sensor(sens))
     if CONF_SUPPORTED_MODES in config:
         cg.add(var.set_supported_modes(config[CONF_SUPPORTED_MODES]))
     if CONF_SUPPORTED_SWING_MODES in config:
diff --git a/esphome/components/haier/hon_climate.cpp b/esphome/components/haier/hon_climate.cpp
index e5aa88e2c9..9933cb4c8f 100644
--- a/esphome/components/haier/hon_climate.cpp
+++ b/esphome/components/haier/hon_climate.cpp
@@ -2,6 +2,7 @@
 #include <string>
 #include "esphome/components/climate/climate.h"
 #include "esphome/components/uart/uart.h"
+#include "esphome/core/helpers.h"
 #include "hon_climate.h"
 #include "hon_packet.h"
 
@@ -51,10 +52,9 @@ hon_protocol::HorizontalSwingMode get_horizontal_swing_mode(AirflowHorizontalDir
 }
 
 HonClimate::HonClimate()
-    : cleaning_status_(CleaningState::NO_CLEANING),
-      got_valid_outdoor_temp_(false),
-      active_alarms_{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
-      outdoor_sensor_(nullptr) {
+    : cleaning_status_(CleaningState::NO_CLEANING), got_valid_outdoor_temp_(false), active_alarms_{0x00, 0x00, 0x00,
+                                                                                                   0x00, 0x00, 0x00,
+                                                                                                   0x00, 0x00} {
   last_status_message_ = std::unique_ptr<uint8_t[]>(new uint8_t[sizeof(hon_protocol::HaierPacketControl)]);
   this->fan_mode_speed_ = (uint8_t) hon_protocol::FanMode::FAN_MID;
   this->other_modes_fan_speed_ = (uint8_t) hon_protocol::FanMode::FAN_AUTO;
@@ -66,8 +66,6 @@ void HonClimate::set_beeper_state(bool state) { this->beeper_status_ = state; }
 
 bool HonClimate::get_beeper_state() const { return this->beeper_status_; }
 
-void HonClimate::set_outdoor_temperature_sensor(esphome::sensor::Sensor *sensor) { this->outdoor_sensor_ = sensor; }
-
 AirflowVerticalDirection HonClimate::get_vertical_airflow() const { return this->vertical_direction_; };
 
 void HonClimate::set_vertical_airflow(AirflowVerticalDirection direction) {
@@ -368,7 +366,14 @@ void HonClimate::process_phase(std::chrono::steady_clock::time_point now) {
       if (this->can_send_message() && this->is_message_interval_exceeded_(now)) {
         static const haier_protocol::HaierMessage STATUS_REQUEST(
             haier_protocol::FrameType::CONTROL, (uint16_t) hon_protocol::SubcommandsControl::GET_USER_DATA);
-        this->send_message_(STATUS_REQUEST, this->use_crc_);
+        static const haier_protocol::HaierMessage BIG_DATA_REQUEST(
+            haier_protocol::FrameType::CONTROL, (uint16_t) hon_protocol::SubcommandsControl::GET_BIG_DATA);
+        if ((this->protocol_phase_ == ProtocolPhases::SENDING_FIRST_STATUS_REQUEST) ||
+            (!this->should_get_big_data_())) {
+          this->send_message_(STATUS_REQUEST, this->use_crc_);
+        } else {
+          this->send_message_(BIG_DATA_REQUEST, this->use_crc_);
+        }
         this->last_status_request_ = now;
       }
       break;
@@ -685,9 +690,87 @@ void HonClimate::process_alarm_message_(const uint8_t *packet, uint8_t size, boo
   }
 }
 
+#ifdef USE_SENSOR
+void HonClimate::set_sub_sensor(SubSensorType type, sensor::Sensor *sens) {
+  if (type < SubSensorType::SUB_SENSOR_TYPE_COUNT) {
+    if (type >= SubSensorType::BIG_DATA_FRAME_SUB_SENSORS) {
+      if ((this->sub_sensors_[(size_t) type] != nullptr) && (sens == nullptr)) {
+        this->big_data_sensors_--;
+      } else if ((this->sub_sensors_[(size_t) type] == nullptr) && (sens != nullptr)) {
+        this->big_data_sensors_++;
+      }
+    }
+    this->sub_sensors_[(size_t) type] = sens;
+  }
+}
+
+void HonClimate::update_sub_sensor_(SubSensorType type, float value) {
+  if (type < SubSensorType::SUB_SENSOR_TYPE_COUNT) {
+    size_t index = (size_t) type;
+    if ((this->sub_sensors_[index] != nullptr) &&
+        ((!this->sub_sensors_[index]->has_state()) || (this->sub_sensors_[index]->raw_state != value)))
+      this->sub_sensors_[index]->publish_state(value);
+  }
+}
+#endif  // USE_SENSOR
+
+#ifdef USE_BINARY_SENSOR
+void HonClimate::set_sub_binary_sensor(SubBinarySensorType type, binary_sensor::BinarySensor *sens) {
+  if (type < SubBinarySensorType::SUB_BINARY_SENSOR_TYPE_COUNT) {
+    if ((this->sub_binary_sensors_[(size_t) type] != nullptr) && (sens == nullptr)) {
+      this->big_data_sensors_--;
+    } else if ((this->sub_binary_sensors_[(size_t) type] == nullptr) && (sens != nullptr)) {
+      this->big_data_sensors_++;
+    }
+    this->sub_binary_sensors_[(size_t) type] = sens;
+  }
+}
+
+void HonClimate::update_sub_binary_sensor_(SubBinarySensorType type, uint8_t value) {
+  if (value < 2) {
+    bool converted_value = value == 1;
+    size_t index = (size_t) type;
+    if ((this->sub_binary_sensors_[index] != nullptr) && ((!this->sub_binary_sensors_[index]->has_state()) ||
+                                                          (this->sub_binary_sensors_[index]->state != converted_value)))
+      this->sub_binary_sensors_[index]->publish_state(converted_value);
+  }
+}
+#endif  // USE_BINARY_SENSOR
+
 haier_protocol::HandlerError HonClimate::process_status_message_(const uint8_t *packet_buffer, uint8_t size) {
-  if (size < hon_protocol::HAIER_STATUS_FRAME_SIZE + this->extra_control_packet_bytes_)
+  size_t expected_size = 2 + sizeof(hon_protocol::HaierPacketControl) + sizeof(hon_protocol::HaierPacketSensors) +
+                         this->extra_control_packet_bytes_;
+  if (size < expected_size)
     return haier_protocol::HandlerError::WRONG_MESSAGE_STRUCTURE;
+  uint16_t subtype = (((uint16_t) packet_buffer[0]) << 8) + packet_buffer[1];
+  if ((subtype == 0x7D01) && (size >= expected_size + 4 + sizeof(hon_protocol::HaierPacketBigData))) {
+    // Got BigData packet
+    const hon_protocol::HaierPacketBigData *bd_packet =
+        (const hon_protocol::HaierPacketBigData *) (&packet_buffer[expected_size + 4]);
+#ifdef USE_SENSOR
+    this->update_sub_sensor_(SubSensorType::INDOOR_COIL_TEMPERATURE, bd_packet->indoor_coil_temperature / 2.0 - 20);
+    this->update_sub_sensor_(SubSensorType::OUTDOOR_COIL_TEMPERATURE, bd_packet->outdoor_coil_temperature - 64);
+    this->update_sub_sensor_(SubSensorType::OUTDOOR_DEFROST_TEMPERATURE, bd_packet->outdoor_coil_temperature - 64);
+    this->update_sub_sensor_(SubSensorType::OUTDOOR_IN_AIR_TEMPERATURE, bd_packet->outdoor_in_air_temperature - 64);
+    this->update_sub_sensor_(SubSensorType::OUTDOOR_OUT_AIR_TEMPERATURE, bd_packet->outdoor_out_air_temperature - 64);
+    this->update_sub_sensor_(SubSensorType::POWER, encode_uint16(bd_packet->power[0], bd_packet->power[1]));
+    this->update_sub_sensor_(SubSensorType::COMPRESSOR_FREQUENCY, bd_packet->compressor_frequency);
+    this->update_sub_sensor_(SubSensorType::COMPRESSOR_CURRENT,
+                             encode_uint16(bd_packet->compressor_current[0], bd_packet->compressor_current[1]) / 10.0);
+    this->update_sub_sensor_(
+        SubSensorType::EXPANSION_VALVE_OPEN_DEGREE,
+        encode_uint16(bd_packet->expansion_valve_open_degree[0], bd_packet->expansion_valve_open_degree[1]) / 4095.0);
+#endif  // USE_SENSOR
+#ifdef USE_BINARY_SENSOR
+    this->update_sub_binary_sensor_(SubBinarySensorType::OUTDOOR_FAN_STATUS, bd_packet->outdoor_fan_status);
+    this->update_sub_binary_sensor_(SubBinarySensorType::DEFROST_STATUS, bd_packet->defrost_status);
+    this->update_sub_binary_sensor_(SubBinarySensorType::COMPRESSOR_STATUS, bd_packet->compressor_status);
+    this->update_sub_binary_sensor_(SubBinarySensorType::INDOOR_FAN_STATUS, bd_packet->indoor_fan_status);
+    this->update_sub_binary_sensor_(SubBinarySensorType::FOUR_WAY_VALVE_STATUS, bd_packet->four_way_valve_status);
+    this->update_sub_binary_sensor_(SubBinarySensorType::INDOOR_ELECTRIC_HEATING_STATUS,
+                                    bd_packet->indoor_electric_heating_status);
+#endif  // USE_BINARY_SENSOR
+  }
   struct {
     hon_protocol::HaierPacketControl control;
     hon_protocol::HaierPacketSensors sensors;
@@ -699,13 +782,17 @@ haier_protocol::HandlerError HonClimate::process_status_message_(const uint8_t *
   if (packet.sensors.error_status != 0) {
     ESP_LOGW(TAG, "HVAC error, code=0x%02X", packet.sensors.error_status);
   }
-  if ((this->outdoor_sensor_ != nullptr) &&
+#ifdef USE_SENSOR
+  if ((this->sub_sensors_[(size_t) SubSensorType::OUTDOOR_TEMPERATURE] != nullptr) &&
       (this->got_valid_outdoor_temp_ || (packet.sensors.outdoor_temperature > 0))) {
     this->got_valid_outdoor_temp_ = true;
-    float otemp = (float) (packet.sensors.outdoor_temperature + PROTOCOL_OUTDOOR_TEMPERATURE_OFFSET);
-    if ((!this->outdoor_sensor_->has_state()) || (this->outdoor_sensor_->get_raw_state() != otemp))
-      this->outdoor_sensor_->publish_state(otemp);
+    this->update_sub_sensor_(SubSensorType::OUTDOOR_TEMPERATURE,
+                             (float) (packet.sensors.outdoor_temperature + PROTOCOL_OUTDOOR_TEMPERATURE_OFFSET));
   }
+  if ((this->sub_sensors_[(size_t) SubSensorType::HUMIDITY] != nullptr) && (packet.sensors.room_humidity <= 100)) {
+    this->update_sub_sensor_(SubSensorType::HUMIDITY, (float) packet.sensors.room_humidity);
+  }
+#endif  // USE_SENSOR
   bool should_publish = false;
   {
     // Extra modes/presets
@@ -1009,21 +1096,22 @@ void HonClimate::fill_control_messages_queue_() {
           break;
       }
     }
-    if (quiet_mode_buf[1] != 0xFF) {
+    auto presets = this->traits_.get_supported_presets();
+    if ((quiet_mode_buf[1] != 0xFF) && ((presets.find(climate::ClimatePreset::CLIMATE_PRESET_ECO) != presets.end()))) {
       this->control_messages_queue_.push(
           haier_protocol::HaierMessage(haier_protocol::FrameType::CONTROL,
                                        (uint16_t) hon_protocol::SubcommandsControl::SET_SINGLE_PARAMETER +
                                            (uint8_t) hon_protocol::DataParameters::QUIET_MODE,
                                        quiet_mode_buf, 2));
     }
-    if (fast_mode_buf[1] != 0xFF) {
+    if ((fast_mode_buf[1] != 0xFF) && ((presets.find(climate::ClimatePreset::CLIMATE_PRESET_BOOST) != presets.end()))) {
       this->control_messages_queue_.push(
           haier_protocol::HaierMessage(haier_protocol::FrameType::CONTROL,
                                        (uint16_t) hon_protocol::SubcommandsControl::SET_SINGLE_PARAMETER +
                                            (uint8_t) hon_protocol::DataParameters::FAST_MODE,
                                        fast_mode_buf, 2));
     }
-    if (away_mode_buf[1] != 0xFF) {
+    if ((away_mode_buf[1] != 0xFF) && ((presets.find(climate::ClimatePreset::CLIMATE_PRESET_AWAY) != presets.end()))) {
       this->control_messages_queue_.push(
           haier_protocol::HaierMessage(haier_protocol::FrameType::CONTROL,
                                        (uint16_t) hon_protocol::SubcommandsControl::SET_SINGLE_PARAMETER +
@@ -1032,7 +1120,7 @@ void HonClimate::fill_control_messages_queue_() {
     }
   }
   // Target temperature
-  if (climate_control.target_temperature.has_value()) {
+  if (climate_control.target_temperature.has_value() && (this->mode != ClimateMode::CLIMATE_MODE_FAN_ONLY)) {
     uint8_t buffer[2] = {0x00, 0x00};
     buffer[1] = ((uint8_t) climate_control.target_temperature.value()) - 16;
     this->control_messages_queue_.push(
@@ -1119,12 +1207,24 @@ bool HonClimate::prepare_pending_action() {
 
 void HonClimate::process_protocol_reset() {
   HaierClimateBase::process_protocol_reset();
-  if (this->outdoor_sensor_ != nullptr) {
-    this->outdoor_sensor_->publish_state(NAN);
+#ifdef USE_SENSOR
+  for (auto &sub_sensor : this->sub_sensors_) {
+    if ((sub_sensor != nullptr) && sub_sensor->has_state())
+      sub_sensor->publish_state(NAN);
   }
+#endif  // USE_SENSOR
   this->got_valid_outdoor_temp_ = false;
   this->hvac_hardware_info_.reset();
 }
 
+bool HonClimate::should_get_big_data_() {
+  if (this->big_data_sensors_ > 0) {
+    static uint8_t counter = 0;
+    counter = (counter + 1) % 3;
+    return counter == 1;
+  }
+  return false;
+}
+
 }  // namespace haier
 }  // namespace esphome
diff --git a/esphome/components/haier/hon_climate.h b/esphome/components/haier/hon_climate.h
index 9c05e59b87..c4fae20a98 100644
--- a/esphome/components/haier/hon_climate.h
+++ b/esphome/components/haier/hon_climate.h
@@ -1,7 +1,12 @@
 #pragma once
 
 #include <chrono>
+#ifdef USE_SENSOR
 #include "esphome/components/sensor/sensor.h"
+#endif
+#ifdef USE_BINARY_SENSOR
+#include "esphome/components/binary_sensor/binary_sensor.h"
+#endif
 #include "esphome/core/automation.h"
 #include "haier_base.h"
 
@@ -34,6 +39,48 @@ enum class CleaningState : uint8_t {
 enum class HonControlMethod { MONITOR_ONLY = 0, SET_GROUP_PARAMETERS, SET_SINGLE_PARAMETER };
 
 class HonClimate : public HaierClimateBase {
+#ifdef USE_SENSOR
+ public:
+  enum class SubSensorType {
+    // Used data based sensors
+    OUTDOOR_TEMPERATURE = 0,
+    HUMIDITY,
+    // Big data based sensors
+    INDOOR_COIL_TEMPERATURE,
+    OUTDOOR_COIL_TEMPERATURE,
+    OUTDOOR_DEFROST_TEMPERATURE,
+    OUTDOOR_IN_AIR_TEMPERATURE,
+    OUTDOOR_OUT_AIR_TEMPERATURE,
+    POWER,
+    COMPRESSOR_FREQUENCY,
+    COMPRESSOR_CURRENT,
+    EXPANSION_VALVE_OPEN_DEGREE,
+    SUB_SENSOR_TYPE_COUNT,
+    BIG_DATA_FRAME_SUB_SENSORS = INDOOR_COIL_TEMPERATURE,
+  };
+  void set_sub_sensor(SubSensorType type, sensor::Sensor *sens);
+
+ protected:
+  void update_sub_sensor_(SubSensorType type, float value);
+  sensor::Sensor *sub_sensors_[(size_t) SubSensorType::SUB_SENSOR_TYPE_COUNT]{nullptr};
+#endif
+#ifdef USE_BINARY_SENSOR
+ public:
+  enum class SubBinarySensorType {
+    OUTDOOR_FAN_STATUS = 0,
+    DEFROST_STATUS,
+    COMPRESSOR_STATUS,
+    INDOOR_FAN_STATUS,
+    FOUR_WAY_VALVE_STATUS,
+    INDOOR_ELECTRIC_HEATING_STATUS,
+    SUB_BINARY_SENSOR_TYPE_COUNT,
+  };
+  void set_sub_binary_sensor(SubBinarySensorType type, binary_sensor::BinarySensor *sens);
+
+ protected:
+  void update_sub_binary_sensor_(SubBinarySensorType type, uint8_t value);
+  binary_sensor::BinarySensor *sub_binary_sensors_[(size_t) SubBinarySensorType::SUB_BINARY_SENSOR_TYPE_COUNT]{nullptr};
+#endif
  public:
   HonClimate();
   HonClimate(const HonClimate &) = delete;
@@ -42,7 +89,6 @@ class HonClimate : public HaierClimateBase {
   void dump_config() override;
   void set_beeper_state(bool state);
   bool get_beeper_state() const;
-  void set_outdoor_temperature_sensor(esphome::sensor::Sensor *sensor);
   AirflowVerticalDirection get_vertical_airflow() const;
   void set_vertical_airflow(AirflowVerticalDirection direction);
   AirflowHorizontalDirection get_horizontal_airflow() const;
@@ -64,6 +110,7 @@ class HonClimate : public HaierClimateBase {
   haier_protocol::HaierMessage get_power_message(bool state) override;
   bool prepare_pending_action() override;
   void process_protocol_reset() override;
+  bool should_get_big_data_();
 
   // Answers handlers
   haier_protocol::HandlerError get_device_version_answer_handler_(haier_protocol::FrameType request_type,
@@ -106,12 +153,12 @@ class HonClimate : public HaierClimateBase {
   uint8_t active_alarms_[8];
   int extra_control_packet_bytes_;
   HonControlMethod control_method_;
-  esphome::sensor::Sensor *outdoor_sensor_;
   std::queue<haier_protocol::HaierMessage> control_messages_queue_;
   CallbackManager<void(uint8_t, const char *)> alarm_start_callback_{};
   CallbackManager<void(uint8_t, const char *)> alarm_end_callback_{};
   float active_alarm_count_{NAN};
   std::chrono::steady_clock::time_point last_alarm_request_;
+  int big_data_sensors_{0};
 };
 
 class HaierAlarmStartTrigger : public Trigger<uint8_t, const char *> {
diff --git a/esphome/components/haier/hon_packet.h b/esphome/components/haier/hon_packet.h
index be1b0ae51c..bbca7bb653 100644
--- a/esphome/components/haier/hon_packet.h
+++ b/esphome/components/haier/hon_packet.h
@@ -55,18 +55,18 @@ enum class FanMode : uint8_t { FAN_HIGH = 0x01, FAN_MID = 0x02, FAN_LOW = 0x03,
 
 struct HaierPacketControl {
   // Control bytes starts here
-  // 10
+  // 1
   uint8_t set_point;  // Target temperature with 16°C offset (0x00 = 16°C)
-  // 11
+  // 2
   uint8_t vertical_swing_mode : 4;  // See enum VerticalSwingMode
   uint8_t : 0;
-  // 12
+  // 3
   uint8_t fan_mode : 3;      // See enum FanMode
   uint8_t special_mode : 2;  // See enum SpecialMode
   uint8_t ac_mode : 3;       // See enum ConditioningMode
-  // 13
+  // 4
   uint8_t : 8;
-  // 14
+  // 5
   uint8_t ten_degree : 1;           // 10 degree status
   uint8_t display_status : 1;       // If 0 disables AC's display
   uint8_t half_degree : 1;          // Use half degree
@@ -75,7 +75,7 @@ struct HaierPacketControl {
   uint8_t use_fahrenheit : 1;       // Use Fahrenheit instead of Celsius
   uint8_t : 1;
   uint8_t steri_clean : 1;
-  // 15
+  // 6
   uint8_t ac_power : 1;                 // Is ac on or off
   uint8_t health_mode : 1;              // Health mode (negative ions) on or off
   uint8_t electric_heating_status : 1;  // Electric heating status
@@ -84,16 +84,16 @@ struct HaierPacketControl {
   uint8_t sleep_mode : 1;               // Sleep mode
   uint8_t lock_remote : 1;              // Disable remote
   uint8_t beeper_status : 1;  // If 1 disables AC's command feedback beeper (need to be set on every control command)
-  // 16
+  // 7
   uint8_t target_humidity;  // Target humidity (0=30% .. 3C=90%, step = 1%)
-  // 17
+  // 8
   uint8_t horizontal_swing_mode : 3;  // See enum HorizontalSwingMode
   uint8_t : 3;
   uint8_t human_sensing_status : 2;  // Human sensing status
-  // 18
+  // 9
   uint8_t change_filter : 1;  // Filter need replacement
   uint8_t : 0;
-  // 19
+  // 10
   uint8_t fresh_air_status : 1;       // Fresh air status
   uint8_t humidification_status : 1;  // Humidification status
   uint8_t pm2p5_cleaning_status : 1;  // PM2.5 cleaning status
@@ -105,40 +105,68 @@ struct HaierPacketControl {
 };
 
 struct HaierPacketSensors {
-  // 20
+  // 11
   uint8_t room_temperature;  // 0.5°C step
-  // 21
+  // 12
   uint8_t room_humidity;  // 0%-100% with 1% step
-  // 22
+  // 13
   uint8_t outdoor_temperature;  // 1°C step, -64°C offset (0=-64°C)
-  // 23
+  // 14
   uint8_t pm2p5_level : 2;    // Indoor PM2.5 grade (00: Excellent, 01: good, 02: Medium, 03: Bad)
   uint8_t air_quality : 2;    // Air quality grade (00: Excellent, 01: good, 02: Medium, 03: Bad)
   uint8_t human_sensing : 2;  // Human presence result (00: N/A, 01: not detected, 02: One, 03: Multiple)
   uint8_t : 1;
   uint8_t ac_type : 1;  // 00 - Heat and cool, 01 - Cool only)
-  // 24
+  // 15
   uint8_t error_status;  // See enum ErrorStatus
-  // 25
+  // 16
   uint8_t operation_source : 2;   // who is controlling AC (00: Other, 01: Remote control, 02: Button, 03: ESP)
   uint8_t operation_mode_hk : 2;  // Homekit only, operation mode (00: Cool, 01: Dry, 02: Heat, 03: Fan)
   uint8_t : 3;
   uint8_t err_confirmation : 1;  // If 1 clear error status
-  // 26
+  // 17
   uint16_t total_cleaning_time;  // Cleaning cumulative time (1h step)
-  // 28
+  // 19
   uint16_t indoor_pm2p5_value;  // Indoor PM2.5 value (0 ug/m3 -  4095 ug/m3, 1 ug/m3 step)
-  // 30
+  // 21
   uint16_t outdoor_pm2p5_value;  // Outdoor PM2.5 value (0 ug/m3 -  4095 ug/m3, 1 ug/m3 step)
-  // 32
+  // 23
   uint16_t ch2o_value;  // Formaldehyde value (0 ug/m3 -  10000 ug/m3, 1 ug/m3 step)
-  // 34
+  // 25
   uint16_t voc_value;  // VOC value (Volatile Organic Compounds) (0 ug/m3 -  1023 ug/m3, 1 ug/m3 step)
-  // 36
+  // 27
   uint16_t co2_value;  // CO2 value (0 PPM -  10000 PPM, 1 PPM step)
 };
 
-constexpr size_t HAIER_STATUS_FRAME_SIZE = 2 + sizeof(HaierPacketControl) + sizeof(HaierPacketSensors);
+struct HaierPacketBigData {
+  // 29
+  uint8_t power[2];  // AC power consumption (0W - 65535W, 1W step)
+  // 31
+  uint8_t indoor_coil_temperature;  // 0.5°C step, -20°C offset (0=-20°C)
+  // 32
+  uint8_t outdoor_out_air_temperature;  // 1°C step, -64°C offset (0=-64°C)
+  // 33
+  uint8_t outdoor_coil_temperature;  // 1°C step, -64°C offset (0=-64°C)
+  // 34
+  uint8_t outdoor_in_air_temperature;  // 1°C step, -64°C offset (0=-64°C)
+  // 35
+  uint8_t outdoor_defrost_temperature;  // 1°C step, -64°C offset (0=-64°C)
+  // 36
+  uint8_t compressor_frequency;  // 1Hz step, 0Hz - 127Hz
+  // 37
+  uint8_t compressor_current[2];  // 0.1A step, 0.0A - 51.1A (0x0000 - 0x01FF)
+  // 39
+  uint8_t outdoor_fan_status : 2;  // 0 - off, 1 - on,  2 - information not available
+  uint8_t defrost_status : 2;      // 0 - off, 1 - on,  2 - information not available
+  uint8_t : 0;
+  // 40
+  uint8_t compressor_status : 2;               // 0 - off, 1 - on,  2 - information not available
+  uint8_t indoor_fan_status : 2;               // 0 - off, 1 - on,  2 - information not available
+  uint8_t four_way_valve_status : 2;           // 0 - off, 1 - on,  2 - information not available
+  uint8_t indoor_electric_heating_status : 2;  // 0 - off, 1 - on,  2 - information not available
+  // 41
+  uint8_t expansion_valve_open_degree[2];  // 0 - 4095
+};
 
 struct DeviceVersionAnswer {
   char protocol_version[8];
diff --git a/esphome/components/haier/sensor/__init__.py b/esphome/components/haier/sensor/__init__.py
new file mode 100644
index 0000000000..9a4965493d
--- /dev/null
+++ b/esphome/components/haier/sensor/__init__.py
@@ -0,0 +1,151 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import sensor
+from esphome.const import (
+    CONF_POWER,
+    CONF_HUMIDITY,
+    DEVICE_CLASS_CURRENT,
+    DEVICE_CLASS_FREQUENCY,
+    DEVICE_CLASS_HUMIDITY,
+    DEVICE_CLASS_POWER,
+    DEVICE_CLASS_TEMPERATURE,
+    ENTITY_CATEGORY_DIAGNOSTIC,
+    ICON_CURRENT_AC,
+    ICON_FLASH,
+    ICON_GAUGE,
+    ICON_HEATING_COIL,
+    ICON_PULSE,
+    ICON_THERMOMETER,
+    ICON_WATER_PERCENT,
+    ICON_WEATHER_WINDY,
+    STATE_CLASS_MEASUREMENT,
+    UNIT_AMPERE,
+    UNIT_CELSIUS,
+    UNIT_HERTZ,
+    UNIT_PERCENT,
+    UNIT_WATT,
+)
+from ..climate import (
+    CONF_HAIER_ID,
+    HonClimate,
+)
+
+SensorTypeEnum = HonClimate.enum("SubSensorType", True)
+
+# Haier sensors
+CONF_COMPRESSOR_CURRENT = "compressor_current"
+CONF_COMPRESSOR_FREQUENCY = "compressor_frequency"
+CONF_EXPANSION_VALVE_OPEN_DEGREE = "expansion_valve_open_degree"
+CONF_INDOOR_COIL_TEMPERATURE = "indoor_coil_temperature"
+CONF_OUTDOOR_COIL_TEMPERATURE = "outdoor_coil_temperature"
+CONF_OUTDOOR_DEFROST_TEMPERATURE = "outdoor_defrost_temperature"
+CONF_OUTDOOR_IN_AIR_TEMPERATURE = "outdoor_in_air_temperature"
+CONF_OUTDOOR_OUT_AIR_TEMPERATURE = "outdoor_out_air_temperature"
+CONF_OUTDOOR_TEMPERATURE = "outdoor_temperature"
+
+# Additional icons
+ICON_SNOWFLAKE_THERMOMETER = "mdi:snowflake-thermometer"
+
+SENSOR_TYPES = {
+    CONF_COMPRESSOR_CURRENT: sensor.sensor_schema(
+        unit_of_measurement=UNIT_AMPERE,
+        icon=ICON_CURRENT_AC,
+        accuracy_decimals=1,
+        device_class=DEVICE_CLASS_CURRENT,
+        state_class=STATE_CLASS_MEASUREMENT,
+        entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+    ),
+    CONF_COMPRESSOR_FREQUENCY: sensor.sensor_schema(
+        unit_of_measurement=UNIT_HERTZ,
+        icon=ICON_PULSE,
+        accuracy_decimals=0,
+        device_class=DEVICE_CLASS_FREQUENCY,
+        state_class=STATE_CLASS_MEASUREMENT,
+        entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+    ),
+    CONF_EXPANSION_VALVE_OPEN_DEGREE: sensor.sensor_schema(
+        unit_of_measurement=UNIT_PERCENT,
+        icon=ICON_GAUGE,
+        accuracy_decimals=2,
+        state_class=STATE_CLASS_MEASUREMENT,
+        entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+    ),
+    CONF_HUMIDITY: sensor.sensor_schema(
+        unit_of_measurement=UNIT_PERCENT,
+        icon=ICON_WATER_PERCENT,
+        accuracy_decimals=0,
+        device_class=DEVICE_CLASS_HUMIDITY,
+        state_class=STATE_CLASS_MEASUREMENT,
+    ),
+    CONF_INDOOR_COIL_TEMPERATURE: sensor.sensor_schema(
+        unit_of_measurement=UNIT_CELSIUS,
+        icon=ICON_HEATING_COIL,
+        accuracy_decimals=0,
+        device_class=DEVICE_CLASS_TEMPERATURE,
+        state_class=STATE_CLASS_MEASUREMENT,
+        entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+    ),
+    CONF_OUTDOOR_COIL_TEMPERATURE: sensor.sensor_schema(
+        unit_of_measurement=UNIT_CELSIUS,
+        icon=ICON_HEATING_COIL,
+        accuracy_decimals=0,
+        device_class=DEVICE_CLASS_TEMPERATURE,
+        state_class=STATE_CLASS_MEASUREMENT,
+        entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+    ),
+    CONF_OUTDOOR_DEFROST_TEMPERATURE: sensor.sensor_schema(
+        unit_of_measurement=UNIT_CELSIUS,
+        icon=ICON_SNOWFLAKE_THERMOMETER,
+        accuracy_decimals=0,
+        device_class=DEVICE_CLASS_TEMPERATURE,
+        state_class=STATE_CLASS_MEASUREMENT,
+        entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+    ),
+    CONF_OUTDOOR_IN_AIR_TEMPERATURE: sensor.sensor_schema(
+        unit_of_measurement=UNIT_CELSIUS,
+        icon=ICON_WEATHER_WINDY,
+        accuracy_decimals=0,
+        device_class=DEVICE_CLASS_TEMPERATURE,
+        state_class=STATE_CLASS_MEASUREMENT,
+        entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+    ),
+    CONF_OUTDOOR_OUT_AIR_TEMPERATURE: sensor.sensor_schema(
+        unit_of_measurement=UNIT_CELSIUS,
+        icon=ICON_WEATHER_WINDY,
+        accuracy_decimals=0,
+        device_class=DEVICE_CLASS_TEMPERATURE,
+        state_class=STATE_CLASS_MEASUREMENT,
+        entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+    ),
+    CONF_OUTDOOR_TEMPERATURE: sensor.sensor_schema(
+        unit_of_measurement=UNIT_CELSIUS,
+        icon=ICON_THERMOMETER,
+        accuracy_decimals=0,
+        device_class=DEVICE_CLASS_TEMPERATURE,
+        state_class=STATE_CLASS_MEASUREMENT,
+    ),
+    CONF_POWER: sensor.sensor_schema(
+        unit_of_measurement=UNIT_WATT,
+        icon=ICON_FLASH,
+        accuracy_decimals=0,
+        device_class=DEVICE_CLASS_POWER,
+        state_class=STATE_CLASS_MEASUREMENT,
+        entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+    ),
+}
+
+CONFIG_SCHEMA = cv.Schema(
+    {
+        cv.Required(CONF_HAIER_ID): cv.use_id(HonClimate),
+    }
+).extend({cv.Optional(type): schema for type, schema in SENSOR_TYPES.items()})
+
+
+async def to_code(config):
+    paren = await cg.get_variable(config[CONF_HAIER_ID])
+
+    for type, _ in SENSOR_TYPES.items():
+        if conf := config.get(type):
+            sens = await sensor.new_sensor(conf)
+            sensor_type = getattr(SensorTypeEnum, type.upper())
+            cg.add(paren.set_sub_sensor(sensor_type, sens))
diff --git a/tests/components/haier/test.esp32-c3-idf.yaml b/tests/components/haier/test.esp32-c3-idf.yaml
new file mode 100644
index 0000000000..72cfb781a7
--- /dev/null
+++ b/tests/components/haier/test.esp32-c3-idf.yaml
@@ -0,0 +1,95 @@
+wifi:
+  ssid: MySSID
+  password: password1
+
+uart:
+  - id: uart_haier
+    tx_pin: 4
+    rx_pin: 5
+    baud_rate: 9600
+
+climate:
+  - platform: haier
+    id: haier_ac
+    protocol: hOn
+    name: Haier AC
+    wifi_signal: true
+    answer_timeout: 200ms
+    beeper: true
+    visual:
+      min_temperature: 16 °C
+      max_temperature: 30 °C
+      temperature_step:
+        target_temperature: 1
+        current_temperature: 0.5
+    supported_modes:
+      - 'OFF'
+      - HEAT_COOL
+      - COOL
+      - HEAT
+      - DRY
+      - FAN_ONLY
+    supported_swing_modes:
+      - 'OFF'
+      - VERTICAL
+      - HORIZONTAL
+      - BOTH
+    supported_presets:
+      - AWAY
+      - BOOST
+      - ECO
+      - SLEEP
+    on_alarm_start:
+      then:
+        - logger.log:
+            level: DEBUG
+            format: "Alarm activated. Code: %d. Message: \"%s\""
+            args: [code, message]
+    on_alarm_end:
+      then:
+        - logger.log:
+            level: DEBUG
+            format: "Alarm deactivated. Code: %d. Message: \"%s\""
+            args: [code, message]
+
+sensor:
+  - platform: haier
+    haier_id: haier_ac
+    outdoor_temperature:
+      name: Haier outdoor temperature
+    humidity:
+      name: Haier Indoor Humidity
+    compressor_current:
+      name: Haier Compressor Current
+    compressor_frequency:
+      name: Haier Compressor Frequency
+    expansion_valve_open_degree:
+      name: Haier Expansion Valve Open Degree
+    indoor_coil_temperature:
+      name: Haier Indoor Coil Temperature
+    outdoor_coil_temperature:
+      name: Haier Outdoor Coil Temperature
+    outdoor_defrost_temperature:
+      name: Haier Outdoor Defrost Temperature
+    outdoor_in_air_temperature:
+      name: Haier Outdoor In Air Temperature
+    outdoor_out_air_temperature:
+      name: Haier Outdoor Out Air Temperature
+    power:
+      name: Haier Power
+
+binary_sensor:
+  - platform: haier
+    haier_id: haier_ac
+    compressor_status:
+      name: Haier Outdoor Compressor Status
+    defrost_status:
+      name: Haier Defrost Status
+    four_way_valve_status:
+      name: Haier Four Way Valve Status
+    indoor_electric_heating_status:
+      name: Haier Indoor Electric Heating Status
+    indoor_fan_status:
+      name: Haier Indoor Fan Status
+    outdoor_fan_status:
+      name: Haier Outdoor Fan Status
diff --git a/tests/components/haier/test.esp32-c3.yaml b/tests/components/haier/test.esp32-c3.yaml
new file mode 100644
index 0000000000..72cfb781a7
--- /dev/null
+++ b/tests/components/haier/test.esp32-c3.yaml
@@ -0,0 +1,95 @@
+wifi:
+  ssid: MySSID
+  password: password1
+
+uart:
+  - id: uart_haier
+    tx_pin: 4
+    rx_pin: 5
+    baud_rate: 9600
+
+climate:
+  - platform: haier
+    id: haier_ac
+    protocol: hOn
+    name: Haier AC
+    wifi_signal: true
+    answer_timeout: 200ms
+    beeper: true
+    visual:
+      min_temperature: 16 °C
+      max_temperature: 30 °C
+      temperature_step:
+        target_temperature: 1
+        current_temperature: 0.5
+    supported_modes:
+      - 'OFF'
+      - HEAT_COOL
+      - COOL
+      - HEAT
+      - DRY
+      - FAN_ONLY
+    supported_swing_modes:
+      - 'OFF'
+      - VERTICAL
+      - HORIZONTAL
+      - BOTH
+    supported_presets:
+      - AWAY
+      - BOOST
+      - ECO
+      - SLEEP
+    on_alarm_start:
+      then:
+        - logger.log:
+            level: DEBUG
+            format: "Alarm activated. Code: %d. Message: \"%s\""
+            args: [code, message]
+    on_alarm_end:
+      then:
+        - logger.log:
+            level: DEBUG
+            format: "Alarm deactivated. Code: %d. Message: \"%s\""
+            args: [code, message]
+
+sensor:
+  - platform: haier
+    haier_id: haier_ac
+    outdoor_temperature:
+      name: Haier outdoor temperature
+    humidity:
+      name: Haier Indoor Humidity
+    compressor_current:
+      name: Haier Compressor Current
+    compressor_frequency:
+      name: Haier Compressor Frequency
+    expansion_valve_open_degree:
+      name: Haier Expansion Valve Open Degree
+    indoor_coil_temperature:
+      name: Haier Indoor Coil Temperature
+    outdoor_coil_temperature:
+      name: Haier Outdoor Coil Temperature
+    outdoor_defrost_temperature:
+      name: Haier Outdoor Defrost Temperature
+    outdoor_in_air_temperature:
+      name: Haier Outdoor In Air Temperature
+    outdoor_out_air_temperature:
+      name: Haier Outdoor Out Air Temperature
+    power:
+      name: Haier Power
+
+binary_sensor:
+  - platform: haier
+    haier_id: haier_ac
+    compressor_status:
+      name: Haier Outdoor Compressor Status
+    defrost_status:
+      name: Haier Defrost Status
+    four_way_valve_status:
+      name: Haier Four Way Valve Status
+    indoor_electric_heating_status:
+      name: Haier Indoor Electric Heating Status
+    indoor_fan_status:
+      name: Haier Indoor Fan Status
+    outdoor_fan_status:
+      name: Haier Outdoor Fan Status
diff --git a/tests/components/haier/test.esp32-idf.yaml b/tests/components/haier/test.esp32-idf.yaml
new file mode 100644
index 0000000000..d3eeb04d65
--- /dev/null
+++ b/tests/components/haier/test.esp32-idf.yaml
@@ -0,0 +1,95 @@
+wifi:
+  ssid: MySSID
+  password: password1
+
+uart:
+  - id: uart_haier
+    tx_pin: 17
+    rx_pin: 16
+    baud_rate: 9600
+
+climate:
+  - platform: haier
+    id: haier_ac
+    protocol: hOn
+    name: Haier AC
+    wifi_signal: true
+    answer_timeout: 200ms
+    beeper: true
+    visual:
+      min_temperature: 16 °C
+      max_temperature: 30 °C
+      temperature_step:
+        target_temperature: 1
+        current_temperature: 0.5
+    supported_modes:
+      - 'OFF'
+      - HEAT_COOL
+      - COOL
+      - HEAT
+      - DRY
+      - FAN_ONLY
+    supported_swing_modes:
+      - 'OFF'
+      - VERTICAL
+      - HORIZONTAL
+      - BOTH
+    supported_presets:
+      - AWAY
+      - BOOST
+      - ECO
+      - SLEEP
+    on_alarm_start:
+      then:
+        - logger.log:
+            level: DEBUG
+            format: "Alarm activated. Code: %d. Message: \"%s\""
+            args: [code, message]
+    on_alarm_end:
+      then:
+        - logger.log:
+            level: DEBUG
+            format: "Alarm deactivated. Code: %d. Message: \"%s\""
+            args: [code, message]
+
+sensor:
+  - platform: haier
+    haier_id: haier_ac
+    outdoor_temperature:
+      name: Haier outdoor temperature
+    humidity:
+      name: Haier Indoor Humidity
+    compressor_current:
+      name: Haier Compressor Current
+    compressor_frequency:
+      name: Haier Compressor Frequency
+    expansion_valve_open_degree:
+      name: Haier Expansion Valve Open Degree
+    indoor_coil_temperature:
+      name: Haier Indoor Coil Temperature
+    outdoor_coil_temperature:
+      name: Haier Outdoor Coil Temperature
+    outdoor_defrost_temperature:
+      name: Haier Outdoor Defrost Temperature
+    outdoor_in_air_temperature:
+      name: Haier Outdoor In Air Temperature
+    outdoor_out_air_temperature:
+      name: Haier Outdoor Out Air Temperature
+    power:
+      name: Haier Power
+
+binary_sensor:
+  - platform: haier
+    haier_id: haier_ac
+    compressor_status:
+      name: Haier Outdoor Compressor Status
+    defrost_status:
+      name: Haier Defrost Status
+    four_way_valve_status:
+      name: Haier Four Way Valve Status
+    indoor_electric_heating_status:
+      name: Haier Indoor Electric Heating Status
+    indoor_fan_status:
+      name: Haier Indoor Fan Status
+    outdoor_fan_status:
+      name: Haier Outdoor Fan Status
diff --git a/tests/components/haier/test.esp32.yaml b/tests/components/haier/test.esp32.yaml
new file mode 100644
index 0000000000..d3eeb04d65
--- /dev/null
+++ b/tests/components/haier/test.esp32.yaml
@@ -0,0 +1,95 @@
+wifi:
+  ssid: MySSID
+  password: password1
+
+uart:
+  - id: uart_haier
+    tx_pin: 17
+    rx_pin: 16
+    baud_rate: 9600
+
+climate:
+  - platform: haier
+    id: haier_ac
+    protocol: hOn
+    name: Haier AC
+    wifi_signal: true
+    answer_timeout: 200ms
+    beeper: true
+    visual:
+      min_temperature: 16 °C
+      max_temperature: 30 °C
+      temperature_step:
+        target_temperature: 1
+        current_temperature: 0.5
+    supported_modes:
+      - 'OFF'
+      - HEAT_COOL
+      - COOL
+      - HEAT
+      - DRY
+      - FAN_ONLY
+    supported_swing_modes:
+      - 'OFF'
+      - VERTICAL
+      - HORIZONTAL
+      - BOTH
+    supported_presets:
+      - AWAY
+      - BOOST
+      - ECO
+      - SLEEP
+    on_alarm_start:
+      then:
+        - logger.log:
+            level: DEBUG
+            format: "Alarm activated. Code: %d. Message: \"%s\""
+            args: [code, message]
+    on_alarm_end:
+      then:
+        - logger.log:
+            level: DEBUG
+            format: "Alarm deactivated. Code: %d. Message: \"%s\""
+            args: [code, message]
+
+sensor:
+  - platform: haier
+    haier_id: haier_ac
+    outdoor_temperature:
+      name: Haier outdoor temperature
+    humidity:
+      name: Haier Indoor Humidity
+    compressor_current:
+      name: Haier Compressor Current
+    compressor_frequency:
+      name: Haier Compressor Frequency
+    expansion_valve_open_degree:
+      name: Haier Expansion Valve Open Degree
+    indoor_coil_temperature:
+      name: Haier Indoor Coil Temperature
+    outdoor_coil_temperature:
+      name: Haier Outdoor Coil Temperature
+    outdoor_defrost_temperature:
+      name: Haier Outdoor Defrost Temperature
+    outdoor_in_air_temperature:
+      name: Haier Outdoor In Air Temperature
+    outdoor_out_air_temperature:
+      name: Haier Outdoor Out Air Temperature
+    power:
+      name: Haier Power
+
+binary_sensor:
+  - platform: haier
+    haier_id: haier_ac
+    compressor_status:
+      name: Haier Outdoor Compressor Status
+    defrost_status:
+      name: Haier Defrost Status
+    four_way_valve_status:
+      name: Haier Four Way Valve Status
+    indoor_electric_heating_status:
+      name: Haier Indoor Electric Heating Status
+    indoor_fan_status:
+      name: Haier Indoor Fan Status
+    outdoor_fan_status:
+      name: Haier Outdoor Fan Status
diff --git a/tests/components/haier/test.esp8266.yaml b/tests/components/haier/test.esp8266.yaml
new file mode 100644
index 0000000000..72cfb781a7
--- /dev/null
+++ b/tests/components/haier/test.esp8266.yaml
@@ -0,0 +1,95 @@
+wifi:
+  ssid: MySSID
+  password: password1
+
+uart:
+  - id: uart_haier
+    tx_pin: 4
+    rx_pin: 5
+    baud_rate: 9600
+
+climate:
+  - platform: haier
+    id: haier_ac
+    protocol: hOn
+    name: Haier AC
+    wifi_signal: true
+    answer_timeout: 200ms
+    beeper: true
+    visual:
+      min_temperature: 16 °C
+      max_temperature: 30 °C
+      temperature_step:
+        target_temperature: 1
+        current_temperature: 0.5
+    supported_modes:
+      - 'OFF'
+      - HEAT_COOL
+      - COOL
+      - HEAT
+      - DRY
+      - FAN_ONLY
+    supported_swing_modes:
+      - 'OFF'
+      - VERTICAL
+      - HORIZONTAL
+      - BOTH
+    supported_presets:
+      - AWAY
+      - BOOST
+      - ECO
+      - SLEEP
+    on_alarm_start:
+      then:
+        - logger.log:
+            level: DEBUG
+            format: "Alarm activated. Code: %d. Message: \"%s\""
+            args: [code, message]
+    on_alarm_end:
+      then:
+        - logger.log:
+            level: DEBUG
+            format: "Alarm deactivated. Code: %d. Message: \"%s\""
+            args: [code, message]
+
+sensor:
+  - platform: haier
+    haier_id: haier_ac
+    outdoor_temperature:
+      name: Haier outdoor temperature
+    humidity:
+      name: Haier Indoor Humidity
+    compressor_current:
+      name: Haier Compressor Current
+    compressor_frequency:
+      name: Haier Compressor Frequency
+    expansion_valve_open_degree:
+      name: Haier Expansion Valve Open Degree
+    indoor_coil_temperature:
+      name: Haier Indoor Coil Temperature
+    outdoor_coil_temperature:
+      name: Haier Outdoor Coil Temperature
+    outdoor_defrost_temperature:
+      name: Haier Outdoor Defrost Temperature
+    outdoor_in_air_temperature:
+      name: Haier Outdoor In Air Temperature
+    outdoor_out_air_temperature:
+      name: Haier Outdoor Out Air Temperature
+    power:
+      name: Haier Power
+
+binary_sensor:
+  - platform: haier
+    haier_id: haier_ac
+    compressor_status:
+      name: Haier Outdoor Compressor Status
+    defrost_status:
+      name: Haier Defrost Status
+    four_way_valve_status:
+      name: Haier Four Way Valve Status
+    indoor_electric_heating_status:
+      name: Haier Indoor Electric Heating Status
+    indoor_fan_status:
+      name: Haier Indoor Fan Status
+    outdoor_fan_status:
+      name: Haier Outdoor Fan Status
diff --git a/tests/components/haier/test.rp2040.yaml b/tests/components/haier/test.rp2040.yaml
new file mode 100644
index 0000000000..72cfb781a7
--- /dev/null
+++ b/tests/components/haier/test.rp2040.yaml
@@ -0,0 +1,95 @@
+wifi:
+  ssid: MySSID
+  password: password1
+
+uart:
+  - id: uart_haier
+    tx_pin: 4
+    rx_pin: 5
+    baud_rate: 9600
+
+climate:
+  - platform: haier
+    id: haier_ac
+    protocol: hOn
+    name: Haier AC
+    wifi_signal: true
+    answer_timeout: 200ms
+    beeper: true
+    visual:
+      min_temperature: 16 °C
+      max_temperature: 30 °C
+      temperature_step:
+        target_temperature: 1
+        current_temperature: 0.5
+    supported_modes:
+      - 'OFF'
+      - HEAT_COOL
+      - COOL
+      - HEAT
+      - DRY
+      - FAN_ONLY
+    supported_swing_modes:
+      - 'OFF'
+      - VERTICAL
+      - HORIZONTAL
+      - BOTH
+    supported_presets:
+      - AWAY
+      - BOOST
+      - ECO
+      - SLEEP
+    on_alarm_start:
+      then:
+        - logger.log:
+            level: DEBUG
+            format: "Alarm activated. Code: %d. Message: \"%s\""
+            args: [code, message]
+    on_alarm_end:
+      then:
+        - logger.log:
+            level: DEBUG
+            format: "Alarm deactivated. Code: %d. Message: \"%s\""
+            args: [code, message]
+
+sensor:
+  - platform: haier
+    haier_id: haier_ac
+    outdoor_temperature:
+      name: Haier outdoor temperature
+    humidity:
+      name: Haier Indoor Humidity
+    compressor_current:
+      name: Haier Compressor Current
+    compressor_frequency:
+      name: Haier Compressor Frequency
+    expansion_valve_open_degree:
+      name: Haier Expansion Valve Open Degree
+    indoor_coil_temperature:
+      name: Haier Indoor Coil Temperature
+    outdoor_coil_temperature:
+      name: Haier Outdoor Coil Temperature
+    outdoor_defrost_temperature:
+      name: Haier Outdoor Defrost Temperature
+    outdoor_in_air_temperature:
+      name: Haier Outdoor In Air Temperature
+    outdoor_out_air_temperature:
+      name: Haier Outdoor Out Air Temperature
+    power:
+      name: Haier Power
+
+binary_sensor:
+  - platform: haier
+    haier_id: haier_ac
+    compressor_status:
+      name: Haier Outdoor Compressor Status
+    defrost_status:
+      name: Haier Defrost Status
+    four_way_valve_status:
+      name: Haier Four Way Valve Status
+    indoor_electric_heating_status:
+      name: Haier Indoor Electric Heating Status
+    indoor_fan_status:
+      name: Haier Indoor Fan Status
+    outdoor_fan_status:
+      name: Haier Outdoor Fan Status
diff --git a/tests/test3.yaml b/tests/test3.yaml
index ec71bdca8b..1286315a7a 100644
--- a/tests/test3.yaml
+++ b/tests/test3.yaml
@@ -747,6 +747,31 @@ sensor:
     temperature:
       name: Kuntze temperature
 
+  - platform: haier
+    haier_id: haier_climate
+    compressor_current:
+      name: Haier AC compressor current
+    compressor_frequency:
+      name: Haier AC compressor frequency
+    expansion_valve_open_degree:
+      name: Haier AC expansion valve open degree
+    humidity:
+      name: Haier AC indoor humidity
+    indoor_coil_temperature:
+      name: Haier AC indoor coil temperature
+    outdoor_coil_temperature:
+      name: Haier AC outdoor coil temperature
+    outdoor_defrost_temperature:
+      name: Haier AC outdoor defrost temperature
+    outdoor_in_air_temperature:
+      name: Haier AC outdoor in air temperature
+    outdoor_out_air_temperature:
+      name: Haier AC outdoor out air temperature
+    outdoor_temperature:
+      name: Haier AC outdoor temperature
+    power:
+      name: Haier AC power
+
 time:
   - platform: homeassistant
 
@@ -813,6 +838,21 @@ binary_sensor:
       allow_other_uses: true
       number: 3
 
+  - platform: haier
+    haier_id: haier_climate
+    compressor_status:
+      name: Haier AC compressor status
+    defrost_status:
+      name: Haier AC defrost status
+    four_way_valve_status:
+      name: Haier AC four-way valve status
+    indoor_electric_heating_status:
+      name: Haier AC indoor electric heating status
+    indoor_fan_status:
+      name: Haier AC indoor fan status
+    outdoor_fan_status:
+      name: Haier AC outdoor fan status
+
 globals:
   - id: my_global_string
     type: std::string
@@ -1024,14 +1064,13 @@ climate:
       kd_multiplier: 0.0
       deadband_output_averaging_samples: 1
   - platform: haier
+    id: haier_climate
     protocol: hOn
     name: Haier AC
     uart_id: uart_12
     wifi_signal: true
     answer_timeout: 200ms
     beeper: true
-    outdoor_temperature:
-      name: Haier AC outdoor temperature
     visual:
       min_temperature: 16 °C
       max_temperature: 30 °C