diff --git a/.github/workflows/ci.yml b/.github/workflows/ci.yml index 38527c20c7..178b914a1c 100644 --- a/.github/workflows/ci.yml +++ b/.github/workflows/ci.yml @@ -315,7 +315,9 @@ jobs: key: platformio-${{ matrix.pio_cache_key }} - name: Install clang-tidy - run: sudo apt-get install clang-tidy-14 + run: | + sudo apt-get update + sudo apt-get install clang-tidy-14 - name: Register problem matchers run: | @@ -397,7 +399,9 @@ jobs: file: ${{ fromJson(needs.list-components.outputs.components) }} steps: - name: Install dependencies - run: sudo apt-get install libsdl2-dev + run: | + sudo apt-get update + sudo apt-get install libsdl2-dev - name: Check out code from GitHub uses: actions/checkout@v4.1.7 @@ -451,7 +455,9 @@ jobs: run: echo ${{ matrix.components }} - name: Install dependencies - run: sudo apt-get install libsdl2-dev + run: | + sudo apt-get update + sudo apt-get install libsdl2-dev - name: Check out code from GitHub uses: actions/checkout@v4.1.7 diff --git a/CODEOWNERS b/CODEOWNERS index 17300e5942..ced1e93916 100644 --- a/CODEOWNERS +++ b/CODEOWNERS @@ -238,6 +238,7 @@ esphome/components/ltr_als_ps/* @latonita esphome/components/lvgl/* @clydebarrow esphome/components/m5stack_8angle/* @rnauber esphome/components/matrix_keypad/* @ssieb +esphome/components/max17043/* @blacknell esphome/components/max31865/* @DAVe3283 esphome/components/max44009/* @berfenger esphome/components/max6956/* @looping40 @@ -325,7 +326,7 @@ esphome/components/pvvx_mithermometer/* @pasiz esphome/components/pylontech/* @functionpointer esphome/components/qmp6988/* @andrewpc esphome/components/qr_code/* @wjtje -esphome/components/qspi_amoled/* @clydebarrow +esphome/components/qspi_dbi/* @clydebarrow esphome/components/qwiic_pir/* @kahrendt esphome/components/radon_eye_ble/* @jeffeb3 esphome/components/radon_eye_rd200/* @jeffeb3 @@ -404,6 +405,7 @@ esphome/components/sun/* @OttoWinter esphome/components/sun_gtil2/* @Mat931 esphome/components/switch/* @esphome/core esphome/components/t6615/* @tylermenezes +esphome/components/tc74/* @sethgirvan esphome/components/tca9548a/* @andreashergert1984 esphome/components/tca9555/* @mobrembski esphome/components/tcl112/* @glmnet diff --git a/docker/Dockerfile b/docker/Dockerfile index 85823687c2..52a4794f24 100644 --- a/docker/Dockerfile +++ b/docker/Dockerfile @@ -86,7 +86,7 @@ RUN \ pip3 install \ --break-system-packages --no-cache-dir \ # Keep platformio version in sync with requirements.txt - platformio==6.1.15 \ + platformio==6.1.16 \ # Change some platformio settings && platformio settings set enable_telemetry No \ && platformio settings set check_platformio_interval 1000000 \ diff --git a/esphome/automation.py b/esphome/automation.py index 0bd6cf0af0..34159561c2 100644 --- a/esphome/automation.py +++ b/esphome/automation.py @@ -1,6 +1,8 @@ import esphome.codegen as cg import esphome.config_validation as cv from esphome.const import ( + CONF_ALL, + CONF_ANY, CONF_AUTOMATION_ID, CONF_CONDITION, CONF_COUNT, @@ -73,6 +75,13 @@ def validate_potentially_and_condition(value): return validate_condition(value) +def validate_potentially_or_condition(value): + if isinstance(value, list): + with cv.remove_prepend_path(["or"]): + return validate_condition({"or": value}) + return validate_condition(value) + + DelayAction = cg.esphome_ns.class_("DelayAction", Action, cg.Component) LambdaAction = cg.esphome_ns.class_("LambdaAction", Action) IfAction = cg.esphome_ns.class_("IfAction", Action) @@ -166,6 +175,18 @@ async def or_condition_to_code(config, condition_id, template_arg, args): return cg.new_Pvariable(condition_id, template_arg, conditions) +@register_condition("all", AndCondition, validate_condition_list) +async def all_condition_to_code(config, condition_id, template_arg, args): + conditions = await build_condition_list(config, template_arg, args) + return cg.new_Pvariable(condition_id, template_arg, conditions) + + +@register_condition("any", OrCondition, validate_condition_list) +async def any_condition_to_code(config, condition_id, template_arg, args): + conditions = await build_condition_list(config, template_arg, args) + return cg.new_Pvariable(condition_id, template_arg, conditions) + + @register_condition("not", NotCondition, validate_potentially_and_condition) async def not_condition_to_code(config, condition_id, template_arg, args): condition = await build_condition(config, template_arg, args) @@ -223,15 +244,21 @@ async def delay_action_to_code(config, action_id, template_arg, args): IfAction, cv.All( { - cv.Required(CONF_CONDITION): validate_potentially_and_condition, + cv.Exclusive( + CONF_CONDITION, CONF_CONDITION + ): validate_potentially_and_condition, + cv.Exclusive(CONF_ANY, CONF_CONDITION): validate_potentially_or_condition, + cv.Exclusive(CONF_ALL, CONF_CONDITION): validate_potentially_and_condition, cv.Optional(CONF_THEN): validate_action_list, cv.Optional(CONF_ELSE): validate_action_list, }, cv.has_at_least_one_key(CONF_THEN, CONF_ELSE), + cv.has_at_least_one_key(CONF_CONDITION, CONF_ANY, CONF_ALL), ), ) async def if_action_to_code(config, action_id, template_arg, args): - conditions = await build_condition(config[CONF_CONDITION], template_arg, args) + cond_conf = next(el for el in config if el in (CONF_ANY, CONF_ALL, CONF_CONDITION)) + conditions = await build_condition(config[cond_conf], template_arg, args) var = cg.new_Pvariable(action_id, template_arg, conditions) if CONF_THEN in config: actions = await build_action_list(config[CONF_THEN], template_arg, args) diff --git a/esphome/components/display/display.cpp b/esphome/components/display/display.cpp index 63c74e09ca..145a4f5278 100644 --- a/esphome/components/display/display.cpp +++ b/esphome/components/display/display.cpp @@ -156,6 +156,148 @@ void Display::filled_circle(int center_x, int center_y, int radius, Color color) } } while (dx <= 0); } +void Display::filled_ring(int center_x, int center_y, int radius1, int radius2, Color color) { + int rmax = radius1 > radius2 ? radius1 : radius2; + int rmin = radius1 < radius2 ? radius1 : radius2; + int dxmax = -int32_t(rmax), dxmin = -int32_t(rmin); + int dymax = 0, dymin = 0; + int errmax = 2 - 2 * rmax, errmin = 2 - 2 * rmin; + int e2max, e2min; + do { + // 8 dots for borders + this->draw_pixel_at(center_x - dxmax, center_y + dymax, color); + this->draw_pixel_at(center_x + dxmax, center_y + dymax, color); + this->draw_pixel_at(center_x - dxmin, center_y + dymin, color); + this->draw_pixel_at(center_x + dxmin, center_y + dymin, color); + this->draw_pixel_at(center_x + dxmax, center_y - dymax, color); + this->draw_pixel_at(center_x - dxmax, center_y - dymax, color); + this->draw_pixel_at(center_x + dxmin, center_y - dymin, color); + this->draw_pixel_at(center_x - dxmin, center_y - dymin, color); + if (dymin < rmin) { + // two parts - four lines + int hline_width = -(dxmax - dxmin) + 1; + this->horizontal_line(center_x + dxmax, center_y + dymax, hline_width, color); + this->horizontal_line(center_x - dxmin, center_y + dymax, hline_width, color); + this->horizontal_line(center_x + dxmax, center_y - dymax, hline_width, color); + this->horizontal_line(center_x - dxmin, center_y - dymax, hline_width, color); + } else { + // one part - top and bottom + int hline_width = 2 * (-dxmax) + 1; + this->horizontal_line(center_x + dxmax, center_y + dymax, hline_width, color); + this->horizontal_line(center_x + dxmax, center_y - dymax, hline_width, color); + } + e2max = errmax; + // tune external + if (e2max < dymax) { + errmax += ++dymax * 2 + 1; + if (-dxmax == dymax && e2max <= dxmax) { + e2max = 0; + } + } + if (e2max > dxmax) { + errmax += ++dxmax * 2 + 1; + } + // tune internal + while (dymin < dymax && dymin < rmin) { + e2min = errmin; + if (e2min < dymin) { + errmin += ++dymin * 2 + 1; + if (-dxmin == dymin && e2min <= dxmin) { + e2min = 0; + } + } + if (e2min > dxmin) { + errmin += ++dxmin * 2 + 1; + } + } + } while (dxmax <= 0); +} +void Display::filled_gauge(int center_x, int center_y, int radius1, int radius2, int progress, Color color) { + int rmax = radius1 > radius2 ? radius1 : radius2; + int rmin = radius1 < radius2 ? radius1 : radius2; + int dxmax = -int32_t(rmax), dxmin = -int32_t(rmin), upd_dxmax, upd_dxmin; + int dymax = 0, dymin = 0; + int errmax = 2 - 2 * rmax, errmin = 2 - 2 * rmin; + int e2max, e2min; + progress = std::max(0, std::min(progress, 100)); // 0..100 + int draw_progress = progress > 50 ? (100 - progress) : progress; + float tan_a = (progress == 50) ? 65535 : tan(float(draw_progress) * M_PI / 100); // slope + + do { + // outer dots + this->draw_pixel_at(center_x + dxmax, center_y - dymax, color); + this->draw_pixel_at(center_x - dxmax, center_y - dymax, color); + if (dymin < rmin) { // side parts + int lhline_width = -(dxmax - dxmin) + 1; + if (progress >= 50) { + if (float(dymax) < float(-dxmax) * tan_a) { + upd_dxmax = ceil(float(dymax) / tan_a); + } else { + upd_dxmax = -dxmax; + } + this->horizontal_line(center_x + dxmax, center_y - dymax, lhline_width, color); // left + if (!dymax) + this->horizontal_line(center_x - dxmin, center_y, lhline_width, color); // right horizontal border + if (upd_dxmax > -dxmin) { // right + int rhline_width = (upd_dxmax + dxmin) + 1; + this->horizontal_line(center_x - dxmin, center_y - dymax, + rhline_width > lhline_width ? lhline_width : rhline_width, color); + } + } else { + if (float(dymin) > float(-dxmin) * tan_a) { + upd_dxmin = ceil(float(dymin) / tan_a); + } else { + upd_dxmin = -dxmin; + } + lhline_width = -(dxmax + upd_dxmin) + 1; + if (!dymax) + this->horizontal_line(center_x - dxmin, center_y, lhline_width, color); // right horizontal border + if (lhline_width > 0) + this->horizontal_line(center_x + dxmax, center_y - dymax, lhline_width, color); + } + } else { // top part + int hline_width = 2 * (-dxmax) + 1; + if (progress >= 50) { + if (dymax < float(-dxmax) * tan_a) { + upd_dxmax = ceil(float(dymax) / tan_a); + hline_width = -dxmax + upd_dxmax + 1; + } + } else { + if (dymax < float(-dxmax) * tan_a) { + upd_dxmax = ceil(float(dymax) / tan_a); + hline_width = -dxmax - upd_dxmax + 1; + } else + hline_width = 0; + } + if (hline_width > 0) + this->horizontal_line(center_x + dxmax, center_y - dymax, hline_width, color); + } + e2max = errmax; + if (e2max < dymax) { + errmax += ++dymax * 2 + 1; + if (-dxmax == dymax && e2max <= dxmax) { + e2max = 0; + } + } + if (e2max > dxmax) { + errmax += ++dxmax * 2 + 1; + } + while (dymin <= dymax && dymin <= rmin && dxmin <= 0) { + this->draw_pixel_at(center_x + dxmin, center_y - dymin, color); + this->draw_pixel_at(center_x - dxmin, center_y - dymin, color); + e2min = errmin; + if (e2min < dymin) { + errmin += ++dymin * 2 + 1; + if (-dxmin == dymin && e2min <= dxmin) { + e2min = 0; + } + } + if (e2min > dxmin) { + errmin += ++dxmin * 2 + 1; + } + } + } while (dxmax <= 0); +} void HOT Display::triangle(int x1, int y1, int x2, int y2, int x3, int y3, Color color) { this->line(x1, y1, x2, y2, color); this->line(x1, y1, x3, y3, color); diff --git a/esphome/components/display/display.h b/esphome/components/display/display.h index 34feafea6e..54e897cdec 100644 --- a/esphome/components/display/display.h +++ b/esphome/components/display/display.h @@ -285,6 +285,13 @@ class Display : public PollingComponent { /// Fill a circle centered around [center_x,center_y] with the radius radius with the given color. void filled_circle(int center_x, int center_y, int radius, Color color = COLOR_ON); + /// Fill a ring centered around [center_x,center_y] between two circles with the radius1 and radius2 with the given + /// color. + void filled_ring(int center_x, int center_y, int radius1, int radius2, Color color = COLOR_ON); + /// Fill a half-ring "gauge" centered around [center_x,center_y] between two circles with the radius1 and radius2 + /// with he given color and filled up to 'progress' percent + void filled_gauge(int center_x, int center_y, int radius1, int radius2, int progress, Color color = COLOR_ON); + /// Draw the outline of a triangle contained between the points [x1,y1], [x2,y2] and [x3,y3] with the given color. void triangle(int x1, int y1, int x2, int y2, int x3, int y3, Color color = COLOR_ON); diff --git a/esphome/components/esp32_rmt_led_strip/led_strip.cpp b/esphome/components/esp32_rmt_led_strip/led_strip.cpp index 71ab099de5..c2209f7a6c 100644 --- a/esphome/components/esp32_rmt_led_strip/led_strip.cpp +++ b/esphome/components/esp32_rmt_led_strip/led_strip.cpp @@ -22,7 +22,7 @@ void ESP32RMTLEDStripLightOutput::setup() { size_t buffer_size = this->get_buffer_size_(); - ExternalRAMAllocator allocator(ExternalRAMAllocator::ALLOW_FAILURE); + RAMAllocator allocator(this->use_psram_ ? 0 : RAMAllocator::ALLOC_INTERNAL); this->buf_ = allocator.allocate(buffer_size); if (this->buf_ == nullptr) { ESP_LOGE(TAG, "Cannot allocate LED buffer!"); @@ -37,7 +37,7 @@ void ESP32RMTLEDStripLightOutput::setup() { return; } - ExternalRAMAllocator rmt_allocator(ExternalRAMAllocator::ALLOW_FAILURE); + RAMAllocator rmt_allocator(this->use_psram_ ? 0 : RAMAllocator::ALLOC_INTERNAL); this->rmt_buf_ = rmt_allocator.allocate(buffer_size * 8 + 1); // 8 bits per byte, 1 rmt_item32_t per bit + 1 rmt_item32_t for reset diff --git a/esphome/components/esp32_rmt_led_strip/led_strip.h b/esphome/components/esp32_rmt_led_strip/led_strip.h index 43215cf12b..d21bd86e75 100644 --- a/esphome/components/esp32_rmt_led_strip/led_strip.h +++ b/esphome/components/esp32_rmt_led_strip/led_strip.h @@ -45,6 +45,7 @@ class ESP32RMTLEDStripLightOutput : public light::AddressableLight { void set_num_leds(uint16_t num_leds) { this->num_leds_ = num_leds; } void set_is_rgbw(bool is_rgbw) { this->is_rgbw_ = is_rgbw; } void set_is_wrgb(bool is_wrgb) { this->is_wrgb_ = is_wrgb; } + void set_use_psram(bool use_psram) { this->use_psram_ = use_psram; } /// Set a maximum refresh rate in µs as some lights do not like being updated too often. void set_max_refresh_rate(uint32_t interval_us) { this->max_refresh_rate_ = interval_us; } @@ -75,6 +76,7 @@ class ESP32RMTLEDStripLightOutput : public light::AddressableLight { uint16_t num_leds_; bool is_rgbw_; bool is_wrgb_; + bool use_psram_; rmt_item32_t bit0_, bit1_, reset_; RGBOrder rgb_order_; diff --git a/esphome/components/esp32_rmt_led_strip/light.py b/esphome/components/esp32_rmt_led_strip/light.py index 1e3c2d4f72..79f339e248 100644 --- a/esphome/components/esp32_rmt_led_strip/light.py +++ b/esphome/components/esp32_rmt_led_strip/light.py @@ -55,7 +55,7 @@ CHIPSETS = { "SM16703": LEDStripTimings(300, 900, 900, 300, 0, 0), } - +CONF_USE_PSRAM = "use_psram" CONF_IS_WRGB = "is_wrgb" CONF_BIT0_HIGH = "bit0_high" CONF_BIT0_LOW = "bit0_low" @@ -77,6 +77,7 @@ CONFIG_SCHEMA = cv.All( cv.Optional(CONF_CHIPSET): cv.one_of(*CHIPSETS, upper=True), cv.Optional(CONF_IS_RGBW, default=False): cv.boolean, cv.Optional(CONF_IS_WRGB, default=False): cv.boolean, + cv.Optional(CONF_USE_PSRAM, default=True): cv.boolean, cv.Inclusive( CONF_BIT0_HIGH, "custom", @@ -145,6 +146,7 @@ async def to_code(config): cg.add(var.set_rgb_order(config[CONF_RGB_ORDER])) cg.add(var.set_is_rgbw(config[CONF_IS_RGBW])) cg.add(var.set_is_wrgb(config[CONF_IS_WRGB])) + cg.add(var.set_use_psram(config[CONF_USE_PSRAM])) cg.add( var.set_rmt_channel( diff --git a/esphome/components/event/__init__.py b/esphome/components/event/__init__.py index 031a4c0de8..a7732dfcaf 100644 --- a/esphome/components/event/__init__.py +++ b/esphome/components/event/__init__.py @@ -1,6 +1,6 @@ from esphome import automation import esphome.codegen as cg -from esphome.components import mqtt +from esphome.components import mqtt, web_server import esphome.config_validation as cv from esphome.const import ( CONF_DEVICE_CLASS, @@ -11,6 +11,7 @@ from esphome.const import ( CONF_MQTT_ID, CONF_ON_EVENT, CONF_TRIGGER_ID, + CONF_WEB_SERVER, DEVICE_CLASS_BUTTON, DEVICE_CLASS_DOORBELL, DEVICE_CLASS_EMPTY, @@ -40,17 +41,21 @@ EventTrigger = event_ns.class_("EventTrigger", automation.Trigger.template()) validate_device_class = cv.one_of(*DEVICE_CLASSES, lower=True, space="_") -EVENT_SCHEMA = cv.ENTITY_BASE_SCHEMA.extend(cv.MQTT_COMPONENT_SCHEMA).extend( - { - cv.OnlyWith(CONF_MQTT_ID, "mqtt"): cv.declare_id(mqtt.MQTTEventComponent), - cv.GenerateID(): cv.declare_id(Event), - cv.Optional(CONF_DEVICE_CLASS): validate_device_class, - cv.Optional(CONF_ON_EVENT): automation.validate_automation( - { - cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(EventTrigger), - } - ), - } +EVENT_SCHEMA = ( + cv.ENTITY_BASE_SCHEMA.extend(web_server.WEBSERVER_SORTING_SCHEMA) + .extend(cv.MQTT_COMPONENT_SCHEMA) + .extend( + { + cv.OnlyWith(CONF_MQTT_ID, "mqtt"): cv.declare_id(mqtt.MQTTEventComponent), + cv.GenerateID(): cv.declare_id(Event), + cv.Optional(CONF_DEVICE_CLASS): validate_device_class, + cv.Optional(CONF_ON_EVENT): automation.validate_automation( + { + cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(EventTrigger), + } + ), + } + ) ) _UNDEF = object() @@ -97,6 +102,9 @@ async def setup_event_core_(var, config, *, event_types: list[str]): mqtt_ = cg.new_Pvariable(mqtt_id, var) await mqtt.register_mqtt_component(mqtt_, config) + if web_server_config := config.get(CONF_WEB_SERVER): + await web_server.add_entity_config(var, web_server_config) + async def register_event(var, config, *, event_types: list[str]): if not CORE.has_id(config[CONF_ID]): diff --git a/esphome/components/ili9xxx/display.py b/esphome/components/ili9xxx/display.py index 2182ca9a6d..68e3aa953d 100644 --- a/esphome/components/ili9xxx/display.py +++ b/esphome/components/ili9xxx/display.py @@ -10,6 +10,7 @@ from esphome.const import ( CONF_DIMENSIONS, CONF_HEIGHT, CONF_ID, + CONF_INIT_SEQUENCE, CONF_INVERT_COLORS, CONF_LAMBDA, CONF_MIRROR_X, @@ -89,7 +90,6 @@ CONF_LED_PIN = "led_pin" CONF_COLOR_PALETTE_IMAGES = "color_palette_images" CONF_INVERT_DISPLAY = "invert_display" CONF_PIXEL_MODE = "pixel_mode" -CONF_INIT_SEQUENCE = "init_sequence" def cmd(c, *args): diff --git a/esphome/components/internal_temperature/internal_temperature.cpp b/esphome/components/internal_temperature/internal_temperature.cpp index 47f516f568..9ef5cbecd5 100644 --- a/esphome/components/internal_temperature/internal_temperature.cpp +++ b/esphome/components/internal_temperature/internal_temperature.cpp @@ -7,7 +7,8 @@ extern "C" { uint8_t temprature_sens_read(); } -#elif defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3) +#elif defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32C6) || \ + defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3) #include "driver/temp_sensor.h" #endif // USE_ESP32_VARIANT #endif // USE_ESP32 @@ -34,7 +35,8 @@ void InternalTemperatureSensor::update() { ESP_LOGV(TAG, "Raw temperature value: %d", raw); temperature = (raw - 32) / 1.8f; success = (raw != 128); -#elif defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3) +#elif defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32C6) || \ + defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3) temp_sensor_config_t tsens = TSENS_CONFIG_DEFAULT(); temp_sensor_set_config(tsens); temp_sensor_start(); diff --git a/esphome/components/light/__init__.py b/esphome/components/light/__init__.py index 7e16b7a648..feac385b66 100644 --- a/esphome/components/light/__init__.py +++ b/esphome/components/light/__init__.py @@ -3,27 +3,39 @@ import esphome.codegen as cg from esphome.components import mqtt, power_supply, web_server import esphome.config_validation as cv from esphome.const import ( + CONF_BLUE, + CONF_BRIGHTNESS, + CONF_COLD_WHITE, CONF_COLD_WHITE_COLOR_TEMPERATURE, + CONF_COLOR_BRIGHTNESS, CONF_COLOR_CORRECT, + CONF_COLOR_MODE, + CONF_COLOR_TEMPERATURE, CONF_DEFAULT_TRANSITION_LENGTH, CONF_EFFECTS, CONF_FLASH_TRANSITION_LENGTH, CONF_GAMMA_CORRECT, + CONF_GREEN, CONF_ID, + CONF_INITIAL_STATE, CONF_MQTT_ID, CONF_ON_STATE, CONF_ON_TURN_OFF, CONF_ON_TURN_ON, CONF_POWER_SUPPLY, + CONF_RED, CONF_RESTORE_MODE, + CONF_STATE, CONF_TRIGGER_ID, + CONF_WARM_WHITE, CONF_WARM_WHITE_COLOR_TEMPERATURE, CONF_WEB_SERVER, + CONF_WHITE, ) from esphome.core import coroutine_with_priority from esphome.cpp_helpers import setup_entity -from .automation import light_control_to_code # noqa +from .automation import LIGHT_STATE_SCHEMA from .effects import ( ADDRESSABLE_EFFECTS, BINARY_EFFECTS, @@ -35,8 +47,10 @@ from .effects import ( from .types import ( # noqa AddressableLight, AddressableLightState, + ColorMode, LightOutput, LightState, + LightStateRTCState, LightStateTrigger, LightTurnOffTrigger, LightTurnOnTrigger, @@ -85,6 +99,7 @@ LIGHT_SCHEMA = ( cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(LightStateTrigger), } ), + cv.Optional(CONF_INITIAL_STATE): LIGHT_STATE_SCHEMA, } ) ) @@ -145,6 +160,22 @@ async def setup_light_core_(light_var, output_var, config): cg.add(light_var.set_restore_mode(config[CONF_RESTORE_MODE])) + if (initial_state_config := config.get(CONF_INITIAL_STATE)) is not None: + initial_state = LightStateRTCState( + initial_state_config.get(CONF_COLOR_MODE, ColorMode.UNKNOWN), + initial_state_config.get(CONF_STATE, False), + initial_state_config.get(CONF_BRIGHTNESS, 1.0), + initial_state_config.get(CONF_COLOR_BRIGHTNESS, 1.0), + initial_state_config.get(CONF_RED, 1.0), + initial_state_config.get(CONF_GREEN, 1.0), + initial_state_config.get(CONF_BLUE, 1.0), + initial_state_config.get(CONF_WHITE, 1.0), + initial_state_config.get(CONF_COLOR_TEMPERATURE, 1.0), + initial_state_config.get(CONF_COLD_WHITE, 1.0), + initial_state_config.get(CONF_WARM_WHITE, 1.0), + ) + cg.add(light_var.set_initial_state(initial_state)) + if ( default_transition_length := config.get(CONF_DEFAULT_TRANSITION_LENGTH) ) is not None: diff --git a/esphome/components/light/automation.py b/esphome/components/light/automation.py index ec0375f54a..e5aa8fa0e9 100644 --- a/esphome/components/light/automation.py +++ b/esphome/components/light/automation.py @@ -1,41 +1,42 @@ +from esphome import automation import esphome.codegen as cg import esphome.config_validation as cv -from esphome import automation from esphome.const import ( - CONF_ID, - CONF_COLOR_MODE, - CONF_TRANSITION_LENGTH, - CONF_STATE, - CONF_FLASH_LENGTH, - CONF_EFFECT, - CONF_BRIGHTNESS, - CONF_COLOR_BRIGHTNESS, - CONF_RED, - CONF_GREEN, CONF_BLUE, - CONF_WHITE, - CONF_COLOR_TEMPERATURE, + CONF_BRIGHTNESS, + CONF_BRIGHTNESS_LIMITS, CONF_COLD_WHITE, - CONF_WARM_WHITE, + CONF_COLOR_BRIGHTNESS, + CONF_COLOR_MODE, + CONF_COLOR_TEMPERATURE, + CONF_EFFECT, + CONF_FLASH_LENGTH, + CONF_GREEN, + CONF_ID, + CONF_LIMIT_MODE, + CONF_MAX_BRIGHTNESS, + CONF_MIN_BRIGHTNESS, CONF_RANGE_FROM, CONF_RANGE_TO, - CONF_BRIGHTNESS_LIMITS, - CONF_LIMIT_MODE, - CONF_MIN_BRIGHTNESS, - CONF_MAX_BRIGHTNESS, + CONF_RED, + CONF_STATE, + CONF_TRANSITION_LENGTH, + CONF_WARM_WHITE, + CONF_WHITE, ) + from .types import ( - ColorMode, COLOR_MODES, LIMIT_MODES, - DimRelativeAction, - ToggleAction, - LightState, - LightControlAction, AddressableLightState, AddressableSet, - LightIsOnCondition, + ColorMode, + DimRelativeAction, + LightControlAction, LightIsOffCondition, + LightIsOnCondition, + LightState, + ToggleAction, ) @@ -62,18 +63,10 @@ async def light_toggle_to_code(config, action_id, template_arg, args): return var -LIGHT_CONTROL_ACTION_SCHEMA = cv.Schema( +LIGHT_STATE_SCHEMA = cv.Schema( { - cv.Required(CONF_ID): cv.use_id(LightState), cv.Optional(CONF_COLOR_MODE): cv.enum(COLOR_MODES, upper=True, space="_"), cv.Optional(CONF_STATE): cv.templatable(cv.boolean), - cv.Exclusive(CONF_TRANSITION_LENGTH, "transformer"): cv.templatable( - cv.positive_time_period_milliseconds - ), - cv.Exclusive(CONF_FLASH_LENGTH, "transformer"): cv.templatable( - cv.positive_time_period_milliseconds - ), - cv.Exclusive(CONF_EFFECT, "transformer"): cv.templatable(cv.string), cv.Optional(CONF_BRIGHTNESS): cv.templatable(cv.percentage), cv.Optional(CONF_COLOR_BRIGHTNESS): cv.templatable(cv.percentage), cv.Optional(CONF_RED): cv.templatable(cv.percentage), @@ -85,6 +78,20 @@ LIGHT_CONTROL_ACTION_SCHEMA = cv.Schema( cv.Optional(CONF_WARM_WHITE): cv.templatable(cv.percentage), } ) + +LIGHT_CONTROL_ACTION_SCHEMA = LIGHT_STATE_SCHEMA.extend( + { + cv.Required(CONF_ID): cv.use_id(LightState), + cv.Exclusive(CONF_TRANSITION_LENGTH, "transformer"): cv.templatable( + cv.positive_time_period_milliseconds + ), + cv.Exclusive(CONF_FLASH_LENGTH, "transformer"): cv.templatable( + cv.positive_time_period_milliseconds + ), + cv.Exclusive(CONF_EFFECT, "transformer"): cv.templatable(cv.string), + } +) + LIGHT_TURN_OFF_ACTION_SCHEMA = automation.maybe_simple_id( { cv.Required(CONF_ID): cv.use_id(LightState), diff --git a/esphome/components/light/effects.py b/esphome/components/light/effects.py index be50f63321..67c318eb8e 100644 --- a/esphome/components/light/effects.py +++ b/esphome/components/light/effects.py @@ -1,59 +1,59 @@ -from esphome.schema_extractors import SCHEMA_EXTRACT, schema_extractor +from esphome import automation import esphome.codegen as cg import esphome.config_validation as cv -from esphome import automation - from esphome.const import ( - CONF_NAME, - CONF_LAMBDA, - CONF_UPDATE_INTERVAL, - CONF_TRANSITION_LENGTH, - CONF_COLORS, - CONF_STATE, - CONF_DURATION, - CONF_BRIGHTNESS, - CONF_COLOR_MODE, - CONF_COLOR_BRIGHTNESS, - CONF_RED, - CONF_GREEN, - CONF_BLUE, - CONF_WHITE, - CONF_COLOR_TEMPERATURE, - CONF_COLD_WHITE, - CONF_WARM_WHITE, CONF_ALPHA, + CONF_BLUE, + CONF_BRIGHTNESS, + CONF_COLD_WHITE, + CONF_COLOR_BRIGHTNESS, + CONF_COLOR_MODE, + CONF_COLOR_TEMPERATURE, + CONF_COLORS, + CONF_DURATION, + CONF_GREEN, CONF_INTENSITY, - CONF_SPEED, - CONF_WIDTH, - CONF_NUM_LEDS, - CONF_RANDOM, - CONF_SEQUENCE, + CONF_LAMBDA, CONF_MAX_BRIGHTNESS, CONF_MIN_BRIGHTNESS, + CONF_NAME, + CONF_NUM_LEDS, + CONF_RANDOM, + CONF_RED, + CONF_SEQUENCE, + CONF_SPEED, + CONF_STATE, + CONF_TRANSITION_LENGTH, + CONF_UPDATE_INTERVAL, + CONF_WARM_WHITE, + CONF_WHITE, + CONF_WIDTH, ) +from esphome.schema_extractors import SCHEMA_EXTRACT, schema_extractor from esphome.util import Registry + from .types import ( - ColorMode, COLOR_MODES, + AddressableColorWipeEffect, + AddressableColorWipeEffectColor, + AddressableFireworksEffect, + AddressableFlickerEffect, + AddressableLambdaLightEffect, + AddressableLightRef, + AddressableRainbowLightEffect, + AddressableRandomTwinkleEffect, + AddressableScanEffect, + AddressableTwinkleEffect, + AutomationLightEffect, + Color, + ColorMode, + FlickerLightEffect, LambdaLightEffect, + LightColorValues, PulseLightEffect, RandomLightEffect, StrobeLightEffect, StrobeLightEffectColor, - LightColorValues, - AddressableLightRef, - AddressableLambdaLightEffect, - FlickerLightEffect, - AddressableRainbowLightEffect, - AddressableColorWipeEffect, - AddressableColorWipeEffectColor, - AddressableScanEffect, - AddressableTwinkleEffect, - AddressableRandomTwinkleEffect, - AddressableFireworksEffect, - AddressableFlickerEffect, - AutomationLightEffect, - Color, ) CONF_ADD_LED_INTERVAL = "add_led_interval" diff --git a/esphome/components/light/light_state.cpp b/esphome/components/light/light_state.cpp index fe6538e65e..16b78a17bd 100644 --- a/esphome/components/light/light_state.cpp +++ b/esphome/components/light/light_state.cpp @@ -1,6 +1,7 @@ #include "esphome/core/log.h" -#include "light_state.h" + #include "light_output.h" +#include "light_state.h" #include "transformers.h" namespace esphome { @@ -16,21 +17,6 @@ LightCall LightState::turn_off() { return this->make_call().set_state(false); } LightCall LightState::toggle() { return this->make_call().set_state(!this->remote_values.is_on()); } LightCall LightState::make_call() { return LightCall(this); } -struct LightStateRTCState { - ColorMode color_mode{ColorMode::UNKNOWN}; - bool state{false}; - float brightness{1.0f}; - float color_brightness{1.0f}; - float red{1.0f}; - float green{1.0f}; - float blue{1.0f}; - float white{1.0f}; - float color_temp{1.0f}; - float cold_white{1.0f}; - float warm_white{1.0f}; - uint32_t effect{0}; -}; - void LightState::setup() { ESP_LOGCONFIG(TAG, "Setting up light '%s'...", this->get_name().c_str()); @@ -48,6 +34,9 @@ void LightState::setup() { auto call = this->make_call(); LightStateRTCState recovered{}; + if (this->initial_state_.has_value()) { + recovered = *this->initial_state_; + } switch (this->restore_mode_) { case LIGHT_RESTORE_DEFAULT_OFF: case LIGHT_RESTORE_DEFAULT_ON: @@ -175,6 +164,7 @@ void LightState::set_flash_transition_length(uint32_t flash_transition_length) { uint32_t LightState::get_flash_transition_length() const { return this->flash_transition_length_; } void LightState::set_gamma_correct(float gamma_correct) { this->gamma_correct_ = gamma_correct; } void LightState::set_restore_mode(LightRestoreMode restore_mode) { this->restore_mode_ = restore_mode; } +void LightState::set_initial_state(const LightStateRTCState &initial_state) { this->initial_state_ = initial_state; } bool LightState::supports_effects() { return !this->effects_.empty(); } const std::vector &LightState::get_effects() const { return this->effects_; } void LightState::add_effects(const std::vector &effects) { diff --git a/esphome/components/light/light_state.h b/esphome/components/light/light_state.h index b0aaa453b5..acba986f24 100644 --- a/esphome/components/light/light_state.h +++ b/esphome/components/light/light_state.h @@ -28,6 +28,35 @@ enum LightRestoreMode { LIGHT_RESTORE_AND_ON, }; +struct LightStateRTCState { + LightStateRTCState(ColorMode color_mode, bool state, float brightness, float color_brightness, float red, float green, + float blue, float white, float color_temp, float cold_white, float warm_white) + : color_mode(color_mode), + state(state), + brightness(brightness), + color_brightness(color_brightness), + red(red), + green(green), + blue(blue), + white(white), + color_temp(color_temp), + cold_white(cold_white), + warm_white(warm_white) {} + LightStateRTCState() = default; + ColorMode color_mode{ColorMode::UNKNOWN}; + bool state{false}; + float brightness{1.0f}; + float color_brightness{1.0f}; + float red{1.0f}; + float green{1.0f}; + float blue{1.0f}; + float white{1.0f}; + float color_temp{1.0f}; + float cold_white{1.0f}; + float warm_white{1.0f}; + uint32_t effect{0}; +}; + /** This class represents the communication layer between the front-end MQTT layer and the * hardware output layer. */ @@ -116,6 +145,9 @@ class LightState : public EntityBase, public Component { /// Set the restore mode of this light void set_restore_mode(LightRestoreMode restore_mode); + /// Set the initial state of this light + void set_initial_state(const LightStateRTCState &initial_state); + /// Return whether the light has any effects that meet the trait requirements. bool supports_effects(); @@ -212,6 +244,8 @@ class LightState : public EntityBase, public Component { float gamma_correct_{}; /// Restore mode of the light. LightRestoreMode restore_mode_; + /// Initial state of the light. + optional initial_state_{}; /// List of effects for this light. std::vector effects_; diff --git a/esphome/components/light/types.py b/esphome/components/light/types.py index 64483bcc9c..a586bcbd13 100644 --- a/esphome/components/light/types.py +++ b/esphome/components/light/types.py @@ -1,5 +1,5 @@ -import esphome.codegen as cg from esphome import automation +import esphome.codegen as cg # Base light_ns = cg.esphome_ns.namespace("light") @@ -12,6 +12,8 @@ AddressableLightRef = AddressableLight.operator("ref") Color = cg.esphome_ns.class_("Color") LightColorValues = light_ns.class_("LightColorValues") +LightStateRTCState = light_ns.struct("LightStateRTCState") + # Color modes ColorMode = light_ns.enum("ColorMode", is_class=True) COLOR_MODES = { diff --git a/esphome/components/logger/logger_esp32.cpp b/esphome/components/logger/logger_esp32.cpp index b0f1051d34..c9de3d815a 100644 --- a/esphome/components/logger/logger_esp32.cpp +++ b/esphome/components/logger/logger_esp32.cpp @@ -10,8 +10,12 @@ #ifdef USE_LOGGER_USB_SERIAL_JTAG #include +#if ESP_IDF_VERSION < ESP_IDF_VERSION_VAL(5, 3, 0) #include #include +#else +#include +#endif #endif #include "freertos/FreeRTOS.h" @@ -36,10 +40,17 @@ static const char *const TAG = "logger"; static void init_usb_serial_jtag_() { setvbuf(stdin, NULL, _IONBF, 0); // Disable buffering on stdin +#if ESP_IDF_VERSION < ESP_IDF_VERSION_VAL(5, 3, 0) // Minicom, screen, idf_monitor send CR when ENTER key is pressed esp_vfs_dev_usb_serial_jtag_set_rx_line_endings(ESP_LINE_ENDINGS_CR); // Move the caret to the beginning of the next line on '\n' esp_vfs_dev_usb_serial_jtag_set_tx_line_endings(ESP_LINE_ENDINGS_CRLF); +#else + // Minicom, screen, idf_monitor send CR when ENTER key is pressed + usb_serial_jtag_vfs_set_rx_line_endings(ESP_LINE_ENDINGS_CR); + // Move the caret to the beginning of the next line on '\n' + usb_serial_jtag_vfs_set_tx_line_endings(ESP_LINE_ENDINGS_CRLF); +#endif // Enable non-blocking mode on stdin and stdout fcntl(fileno(stdout), F_SETFL, 0); @@ -57,7 +68,11 @@ static void init_usb_serial_jtag_() { } // Tell vfs to use usb-serial-jtag driver +#if ESP_IDF_VERSION < ESP_IDF_VERSION_VAL(5, 3, 0) esp_vfs_usb_serial_jtag_use_driver(); +#else + usb_serial_jtag_vfs_use_driver(); +#endif } #endif diff --git a/esphome/components/lvgl/__init__.py b/esphome/components/lvgl/__init__.py index ce3843567b..dea3b11a94 100644 --- a/esphome/components/lvgl/__init__.py +++ b/esphome/components/lvgl/__init__.py @@ -48,6 +48,7 @@ from .types import ( FontEngine, IdleTrigger, ObjUpdateAction, + PauseTrigger, lv_font_t, lv_group_t, lv_style_t, @@ -233,6 +234,8 @@ async def to_code(config): frac = 8 cg.add(lv_component.set_buffer_frac(int(frac))) cg.add(lv_component.set_full_refresh(config[df.CONF_FULL_REFRESH])) + cg.add(lv_component.set_draw_rounding(config[df.CONF_DRAW_ROUNDING])) + cg.add(lv_component.set_resume_on_input(config[df.CONF_RESUME_ON_INPUT])) for font in helpers.esphome_fonts_used: await cg.get_variable(font) @@ -272,11 +275,19 @@ async def to_code(config): async with LvContext(lv_component): await generate_triggers(lv_component) await generate_page_triggers(lv_component, config) + await initial_focus_to_code(config) for conf in config.get(CONF_ON_IDLE, ()): templ = await cg.templatable(conf[CONF_TIMEOUT], [], cg.uint32) idle_trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], lv_component, templ) await build_automation(idle_trigger, [], conf) - await initial_focus_to_code(config) + for conf in config.get(df.CONF_ON_PAUSE, ()): + pause_trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], lv_component, True) + await build_automation(pause_trigger, [], conf) + for conf in config.get(df.CONF_ON_RESUME, ()): + resume_trigger = cg.new_Pvariable( + conf[CONF_TRIGGER_ID], lv_component, False + ) + await build_automation(resume_trigger, [], conf) for comp in helpers.lvgl_components_required: CORE.add_define(f"USE_LVGL_{comp.upper()}") @@ -314,6 +325,7 @@ CONFIG_SCHEMA = ( cv.Optional(df.CONF_COLOR_DEPTH, default=16): cv.one_of(16), cv.Optional(df.CONF_DEFAULT_FONT, default="montserrat_14"): lvalid.lv_font, cv.Optional(df.CONF_FULL_REFRESH, default=False): cv.boolean, + cv.Optional(df.CONF_DRAW_ROUNDING, default=2): cv.positive_int, cv.Optional(CONF_BUFFER_SIZE, default="100%"): cv.percentage, cv.Optional(df.CONF_LOG_LEVEL, default="WARN"): cv.one_of( *df.LOG_LEVELS, upper=True @@ -341,6 +353,16 @@ CONFIG_SCHEMA = ( ), } ), + cv.Optional(df.CONF_ON_PAUSE): validate_automation( + { + cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(PauseTrigger), + } + ), + cv.Optional(df.CONF_ON_RESUME): validate_automation( + { + cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(PauseTrigger), + } + ), cv.Exclusive(df.CONF_WIDGETS, CONF_PAGES): cv.ensure_list(WIDGET_SCHEMA), cv.Exclusive(CONF_PAGES, CONF_PAGES): cv.ensure_list( container_schema(page_spec) @@ -356,6 +378,7 @@ CONFIG_SCHEMA = ( cv.Optional(df.CONF_TOUCHSCREENS, default=None): touchscreen_schema, cv.Optional(df.CONF_ENCODERS, default=None): ENCODERS_CONFIG, cv.GenerateID(df.CONF_DEFAULT_GROUP): cv.declare_id(lv_group_t), + cv.Optional(df.CONF_RESUME_ON_INPUT, default=True): cv.boolean, } ) .extend(DISP_BG_SCHEMA) diff --git a/esphome/components/lvgl/defines.py b/esphome/components/lvgl/defines.py index 02f726e49c..7c42ed2f22 100644 --- a/esphome/components/lvgl/defines.py +++ b/esphome/components/lvgl/defines.py @@ -408,6 +408,7 @@ CONF_DEFAULT_FONT = "default_font" CONF_DEFAULT_GROUP = "default_group" CONF_DIR = "dir" CONF_DISPLAYS = "displays" +CONF_DRAW_ROUNDING = "draw_rounding" CONF_EDITING = "editing" CONF_ENCODERS = "encoders" CONF_END_ANGLE = "end_angle" @@ -451,6 +452,8 @@ CONF_OFFSET_X = "offset_x" CONF_OFFSET_Y = "offset_y" CONF_ONE_CHECKED = "one_checked" CONF_ONE_LINE = "one_line" +CONF_ON_PAUSE = "on_pause" +CONF_ON_RESUME = "on_resume" CONF_ON_SELECT = "on_select" CONF_OPA = "opa" CONF_NEXT = "next" @@ -466,6 +469,7 @@ CONF_POINTS = "points" CONF_PREVIOUS = "previous" CONF_REPEAT_COUNT = "repeat_count" CONF_RECOLOR = "recolor" +CONF_RESUME_ON_INPUT = "resume_on_input" CONF_RIGHT_BUTTON = "right_button" CONF_ROLLOVER = "rollover" CONF_ROOT_BACK_BTN = "root_back_btn" diff --git a/esphome/components/lvgl/lvgl_esphome.cpp b/esphome/components/lvgl/lvgl_esphome.cpp index b63fb0dab8..ddf41ae377 100644 --- a/esphome/components/lvgl/lvgl_esphome.cpp +++ b/esphome/components/lvgl/lvgl_esphome.cpp @@ -69,30 +69,38 @@ std::string lv_event_code_name_for(uint8_t event_code) { } return str_sprintf("%2d", event_code); } + static void rounder_cb(lv_disp_drv_t *disp_drv, lv_area_t *area) { - // make sure all coordinates are even - if (area->x1 & 1) - area->x1--; - if (!(area->x2 & 1)) - area->x2++; - if (area->y1 & 1) - area->y1--; - if (!(area->y2 & 1)) - area->y2++; + // cater for display driver chips with special requirements for bounds of partial + // draw areas. Extend the draw area to satisfy: + // * Coordinates must be a multiple of draw_rounding + auto *comp = static_cast(disp_drv->user_data); + auto draw_rounding = comp->draw_rounding; + // round down the start coordinates + area->x1 = area->x1 / draw_rounding * draw_rounding; + area->y1 = area->y1 / draw_rounding * draw_rounding; + // round up the end coordinates + area->x2 = (area->x2 + draw_rounding) / draw_rounding * draw_rounding - 1; + area->y2 = (area->y2 + draw_rounding) / draw_rounding * draw_rounding - 1; } lv_event_code_t lv_api_event; // NOLINT lv_event_code_t lv_update_event; // NOLINT -void LvglComponent::dump_config() { ESP_LOGCONFIG(TAG, "LVGL:"); } +void LvglComponent::dump_config() { + ESP_LOGCONFIG(TAG, "LVGL:"); + ESP_LOGCONFIG(TAG, " Rotation: %d", this->rotation); + ESP_LOGCONFIG(TAG, " Draw rounding: %d", (int) this->draw_rounding); +} void LvglComponent::set_paused(bool paused, bool show_snow) { this->paused_ = paused; this->show_snow_ = show_snow; - this->snow_line_ = 0; if (!paused && lv_scr_act() != nullptr) { lv_disp_trig_activity(this->disp_); // resets the inactivity time lv_obj_invalidate(lv_scr_act()); } + this->pause_callbacks_.call(paused); } + void LvglComponent::add_event_cb(lv_obj_t *obj, event_callback_t callback, lv_event_code_t event) { lv_obj_add_event_cb(obj, callback, event, this); } @@ -133,19 +141,64 @@ void LvglComponent::show_prev_page(lv_scr_load_anim_t anim, uint32_t time) { } while (this->pages_[this->current_page_]->skip); // skip empty pages() this->show_page(this->current_page_, anim, time); } -void LvglComponent::draw_buffer_(const lv_area_t *area, const uint8_t *ptr) { +void LvglComponent::draw_buffer_(const lv_area_t *area, lv_color_t *ptr) { + auto width = lv_area_get_width(area); + auto height = lv_area_get_height(area); + auto x1 = area->x1; + auto y1 = area->y1; + lv_color_t *dst = this->rotate_buf_; + switch (this->rotation) { + case display::DISPLAY_ROTATION_90_DEGREES: + for (lv_coord_t x = height - 1; x-- != 0;) { + for (lv_coord_t y = 0; y != width; y++) { + dst[y * height + x] = *ptr++; + } + } + y1 = x1; + x1 = this->disp_drv_.ver_res - area->y1 - height; + width = height; + height = lv_area_get_width(area); + break; + + case display::DISPLAY_ROTATION_180_DEGREES: + for (lv_coord_t y = height; y-- != 0;) { + for (lv_coord_t x = width; x-- != 0;) { + dst[y * width + x] = *ptr++; + } + } + x1 = this->disp_drv_.hor_res - x1 - width; + y1 = this->disp_drv_.ver_res - y1 - height; + break; + + case display::DISPLAY_ROTATION_270_DEGREES: + for (lv_coord_t x = 0; x != height; x++) { + for (lv_coord_t y = width; y-- != 0;) { + dst[y * height + x] = *ptr++; + } + } + x1 = y1; + y1 = this->disp_drv_.hor_res - area->x1 - width; + width = height; + height = lv_area_get_width(area); + break; + + default: + dst = ptr; + break; + } for (auto *display : this->displays_) { - display->draw_pixels_at(area->x1, area->y1, lv_area_get_width(area), lv_area_get_height(area), ptr, - display::COLOR_ORDER_RGB, LV_BITNESS, LV_COLOR_16_SWAP); + ESP_LOGV(TAG, "draw buffer x1=%d, y1=%d, width=%d, height=%d", x1, y1, width, height); + display->draw_pixels_at(x1, y1, width, height, (const uint8_t *) dst, display::COLOR_ORDER_RGB, LV_BITNESS, + LV_COLOR_16_SWAP); } } void LvglComponent::flush_cb_(lv_disp_drv_t *disp_drv, const lv_area_t *area, lv_color_t *color_p) { if (!this->paused_) { auto now = millis(); - this->draw_buffer_(area, (const uint8_t *) color_p); - ESP_LOGV(TAG, "flush_cb, area=%d/%d, %d/%d took %dms", area->x1, area->y1, lv_area_get_width(area), - lv_area_get_height(area), (int) (millis() - now)); + this->draw_buffer_(area, color_p); + ESP_LOGVV(TAG, "flush_cb, area=%d/%d, %d/%d took %dms", area->x1, area->y1, lv_area_get_width(area), + lv_area_get_height(area), (int) (millis() - now)); } lv_disp_flush_ready(disp_drv); } @@ -160,6 +213,13 @@ IdleTrigger::IdleTrigger(LvglComponent *parent, TemplatableValue timeo }); } +PauseTrigger::PauseTrigger(LvglComponent *parent, TemplatableValue paused) : paused_(std::move(paused)) { + parent->add_on_pause_callback([this](bool pausing) { + if (this->paused_.value() == pausing) + this->trigger(); + }); +} + #ifdef USE_LVGL_TOUCHSCREEN LVTouchListener::LVTouchListener(uint16_t long_press_time, uint16_t long_press_repeat_time) { lv_indev_drv_init(&this->drv_); @@ -261,23 +321,31 @@ void LvKeyboardType::set_obj(lv_obj_t *lv_obj) { #endif // USE_LVGL_KEYBOARD void LvglComponent::write_random_() { - // length of 2 lines in 32 bit units - // we write 2 lines for the benefit of displays that won't write one line at a time. - size_t line_len = this->disp_drv_.hor_res * LV_COLOR_DEPTH / 8 / 4 * 2; - for (size_t i = 0; i != line_len; i++) { - ((uint32_t *) (this->draw_buf_.buf1))[i] = random_uint32(); + int iterations = 6 - lv_disp_get_inactive_time(this->disp_) / 60000; + if (iterations <= 0) + iterations = 1; + while (iterations-- != 0) { + auto col = random_uint32() % this->disp_drv_.hor_res; + col = col / this->draw_rounding * this->draw_rounding; + auto row = random_uint32() % this->disp_drv_.ver_res; + row = row / this->draw_rounding * this->draw_rounding; + auto size = (random_uint32() % 32) / this->draw_rounding * this->draw_rounding - 1; + lv_area_t area; + area.x1 = col; + area.y1 = row; + area.x2 = col + size; + area.y2 = row + size; + if (area.x2 >= this->disp_drv_.hor_res) + area.x2 = this->disp_drv_.hor_res - 1; + if (area.y2 >= this->disp_drv_.ver_res) + area.y2 = this->disp_drv_.ver_res - 1; + + size_t line_len = lv_area_get_width(&area) * lv_area_get_height(&area) / 2; + for (size_t i = 0; i != line_len; i++) { + ((uint32_t *) (this->draw_buf_.buf1))[i] = random_uint32(); + } + this->draw_buffer_(&area, (lv_color_t *) this->draw_buf_.buf1); } - lv_area_t area; - area.x1 = 0; - area.x2 = this->disp_drv_.hor_res - 1; - if (this->snow_line_ == this->disp_drv_.ver_res / 2) { - area.y1 = static_cast(random_uint32() % (this->disp_drv_.ver_res / 2) * 2); - } else { - area.y1 = this->snow_line_++ * 2; - } - // write 2 lines - area.y2 = area.y1 + 1; - this->draw_buffer_(&area, (const uint8_t *) this->draw_buf_.buf1); } void LvglComponent::setup() { @@ -291,7 +359,7 @@ void LvglComponent::setup() { auto *display = this->displays_[0]; size_t buffer_pixels = display->get_width() * display->get_height() / this->buffer_frac_; auto buf_bytes = buffer_pixels * LV_COLOR_DEPTH / 8; - auto *buf = lv_custom_mem_alloc(buf_bytes); + auto *buf = lv_custom_mem_alloc(buf_bytes); // NOLINT if (buf == nullptr) { #if ESPHOME_LOG_LEVEL >= ESPHOME_LOG_LEVEL_ERROR ESP_LOGE(TAG, "Malloc failed to allocate %zu bytes", buf_bytes); @@ -307,26 +375,30 @@ void LvglComponent::setup() { this->disp_drv_.full_refresh = this->full_refresh_; this->disp_drv_.flush_cb = static_flush_cb; this->disp_drv_.rounder_cb = rounder_cb; - switch (display->get_rotation()) { - case display::DISPLAY_ROTATION_0_DEGREES: - break; - case display::DISPLAY_ROTATION_90_DEGREES: - this->disp_drv_.sw_rotate = true; - this->disp_drv_.rotated = LV_DISP_ROT_90; - break; - case display::DISPLAY_ROTATION_180_DEGREES: - this->disp_drv_.sw_rotate = true; - this->disp_drv_.rotated = LV_DISP_ROT_180; - break; - case display::DISPLAY_ROTATION_270_DEGREES: - this->disp_drv_.sw_rotate = true; - this->disp_drv_.rotated = LV_DISP_ROT_270; - break; + this->rotation = display->get_rotation(); + if (this->rotation != display::DISPLAY_ROTATION_0_DEGREES) { + this->rotate_buf_ = static_cast(lv_custom_mem_alloc(buf_bytes)); // NOLINT + if (this->rotate_buf_ == nullptr) { +#if ESPHOME_LOG_LEVEL >= ESPHOME_LOG_LEVEL_ERROR + ESP_LOGE(TAG, "Malloc failed to allocate %zu bytes", buf_bytes); +#endif + this->mark_failed(); + this->status_set_error("Memory allocation failure"); + return; + } } display->set_rotation(display::DISPLAY_ROTATION_0_DEGREES); - this->disp_drv_.hor_res = (lv_coord_t) display->get_width(); - this->disp_drv_.ver_res = (lv_coord_t) display->get_height(); - ESP_LOGV(TAG, "sw_rotate = %d, rotated=%d", this->disp_drv_.sw_rotate, this->disp_drv_.rotated); + switch (this->rotation) { + default: + this->disp_drv_.hor_res = (lv_coord_t) display->get_width(); + this->disp_drv_.ver_res = (lv_coord_t) display->get_height(); + break; + case display::DISPLAY_ROTATION_90_DEGREES: + case display::DISPLAY_ROTATION_270_DEGREES: + this->disp_drv_.ver_res = (lv_coord_t) display->get_width(); + this->disp_drv_.hor_res = (lv_coord_t) display->get_height(); + break; + } this->disp_ = lv_disp_drv_register(&this->disp_drv_); for (const auto &v : this->init_lambdas_) v(this); diff --git a/esphome/components/lvgl/lvgl_esphome.h b/esphome/components/lvgl/lvgl_esphome.h index 0c3738bd1f..b28a9bcbe1 100644 --- a/esphome/components/lvgl/lvgl_esphome.h +++ b/esphome/components/lvgl/lvgl_esphome.h @@ -119,6 +119,7 @@ class LvglComponent : public PollingComponent { void add_on_idle_callback(std::function &&callback) { this->idle_callbacks_.add(std::move(callback)); } + void add_on_pause_callback(std::function &&callback) { this->pause_callbacks_.add(std::move(callback)); } void add_display(display::Display *display) { this->displays_.push_back(display); } void add_init_lambda(const std::function &lamb) { this->init_lambdas_.push_back(lamb); } void dump_config() override; @@ -126,12 +127,22 @@ class LvglComponent : public PollingComponent { bool is_idle(uint32_t idle_ms) { return lv_disp_get_inactive_time(this->disp_) > idle_ms; } void set_buffer_frac(size_t frac) { this->buffer_frac_ = frac; } lv_disp_t *get_disp() { return this->disp_; } + // Pause or resume the display. + // @param paused If true, pause the display. If false, resume the display. + // @param show_snow If true, show the snow effect when paused. void set_paused(bool paused, bool show_snow); + bool is_paused() const { return this->paused_; } + // If the display is paused and we have resume_on_input_ set to true, resume the display. + void maybe_wakeup() { + if (this->paused_ && this->resume_on_input_) { + this->set_paused(false, false); + } + } + void add_event_cb(lv_obj_t *obj, event_callback_t callback, lv_event_code_t event); void add_event_cb(lv_obj_t *obj, event_callback_t callback, lv_event_code_t event1, lv_event_code_t event2); void add_event_cb(lv_obj_t *obj, event_callback_t callback, lv_event_code_t event1, lv_event_code_t event2, lv_event_code_t event3); - bool is_paused() const { return this->paused_; } void add_page(LvPageType *page); void show_page(size_t index, lv_scr_load_anim_t anim, uint32_t time); void show_next_page(lv_scr_load_anim_t anim, uint32_t time); @@ -144,10 +155,17 @@ class LvglComponent : public PollingComponent { lv_group_focus_obj(mark); } } + // rounding factor to align bounds of update area when drawing + size_t draw_rounding{2}; + void set_draw_rounding(size_t rounding) { this->draw_rounding = rounding; } + void set_resume_on_input(bool resume_on_input) { this->resume_on_input_ = resume_on_input; } + + // if set to true, the bounds of the update area will always start at 0,0 + display::DisplayRotation rotation{display::DISPLAY_ROTATION_0_DEGREES}; protected: void write_random_(); - void draw_buffer_(const lv_area_t *area, const uint8_t *ptr); + void draw_buffer_(const lv_area_t *area, lv_color_t *ptr); void flush_cb_(lv_disp_drv_t *disp_drv, const lv_area_t *area, lv_color_t *color_p); std::vector displays_{}; lv_disp_draw_buf_t draw_buf_{}; @@ -157,14 +175,16 @@ class LvglComponent : public PollingComponent { std::vector pages_{}; size_t current_page_{0}; bool show_snow_{}; - lv_coord_t snow_line_{}; bool page_wrap_{true}; + bool resume_on_input_{}; std::map focus_marks_{}; std::vector> init_lambdas_; CallbackManager idle_callbacks_{}; + CallbackManager pause_callbacks_{}; size_t buffer_frac_{1}; bool full_refresh_{}; + lv_color_t *rotate_buf_{}; }; class IdleTrigger : public Trigger<> { @@ -176,6 +196,14 @@ class IdleTrigger : public Trigger<> { bool is_idle_{}; }; +class PauseTrigger : public Trigger<> { + public: + explicit PauseTrigger(LvglComponent *parent, TemplatableValue paused); + + protected: + TemplatableValue paused_; +}; + template class LvglAction : public Action, public Parented { public: explicit LvglAction(std::function &&lamb) : action_(std::move(lamb)) {} @@ -200,7 +228,10 @@ class LVTouchListener : public touchscreen::TouchListener, public Parentedparent_->maybe_wakeup(); + } lv_indev_drv_t *get_drv() { return &this->drv_; } protected: @@ -236,12 +267,18 @@ class LVEncoderListener : public Parented { if (!this->parent_->is_paused()) { this->pressed_ = pressed; this->key_ = key; + } else if (!pressed) { + // maybe wakeup on release if paused + this->parent_->maybe_wakeup(); } } void set_count(int32_t count) { - if (!this->parent_->is_paused()) + if (!this->parent_->is_paused()) { this->count_ = count; + } else { + this->parent_->maybe_wakeup(); + } } lv_indev_drv_t *get_drv() { return &this->drv_; } diff --git a/esphome/components/lvgl/types.py b/esphome/components/lvgl/types.py index b452ab5fb3..2d10b67c2d 100644 --- a/esphome/components/lvgl/types.py +++ b/esphome/components/lvgl/types.py @@ -40,6 +40,7 @@ lv_event_code_t = cg.global_ns.enum("lv_event_code_t") lv_indev_type_t = cg.global_ns.enum("lv_indev_type_t") FontEngine = lvgl_ns.class_("FontEngine") IdleTrigger = lvgl_ns.class_("IdleTrigger", automation.Trigger.template()) +PauseTrigger = lvgl_ns.class_("PauseTrigger", automation.Trigger.template()) ObjUpdateAction = lvgl_ns.class_("ObjUpdateAction", automation.Action) LvglCondition = lvgl_ns.class_("LvglCondition", automation.Condition) LvglAction = lvgl_ns.class_("LvglAction", automation.Action) diff --git a/esphome/components/max17043/__init__.py b/esphome/components/max17043/__init__.py new file mode 100644 index 0000000000..1db25ccdd6 --- /dev/null +++ b/esphome/components/max17043/__init__.py @@ -0,0 +1 @@ +CODEOWNERS = ["@blacknell"] diff --git a/esphome/components/max17043/automation.h b/esphome/components/max17043/automation.h new file mode 100644 index 0000000000..44729d119b --- /dev/null +++ b/esphome/components/max17043/automation.h @@ -0,0 +1,20 @@ + +#pragma once +#include "esphome/core/automation.h" +#include "max17043.h" + +namespace esphome { +namespace max17043 { + +template class SleepAction : public Action { + public: + explicit SleepAction(MAX17043Component *max17043) : max17043_(max17043) {} + + void play(Ts... x) override { this->max17043_->sleep_mode(); } + + protected: + MAX17043Component *max17043_; +}; + +} // namespace max17043 +} // namespace esphome diff --git a/esphome/components/max17043/max17043.cpp b/esphome/components/max17043/max17043.cpp new file mode 100644 index 0000000000..4a83320455 --- /dev/null +++ b/esphome/components/max17043/max17043.cpp @@ -0,0 +1,98 @@ +#include "max17043.h" +#include "esphome/core/log.h" + +namespace esphome { +namespace max17043 { + +// MAX174043 is a 1-Cell Fuel Gauge with ModelGauge and Low-Battery Alert +// Consult the datasheet at https://www.analog.com/en/products/max17043.html + +static const char *const TAG = "max17043"; + +static const uint8_t MAX17043_VCELL = 0x02; +static const uint8_t MAX17043_SOC = 0x04; +static const uint8_t MAX17043_CONFIG = 0x0c; + +static const uint16_t MAX17043_CONFIG_POWER_UP_DEFAULT = 0x971C; +static const uint16_t MAX17043_CONFIG_SAFE_MASK = 0xFF1F; // mask out sleep bit (7), unused bit (6) and alert bit (4) +static const uint16_t MAX17043_CONFIG_SLEEP_MASK = 0x0080; + +void MAX17043Component::update() { + uint16_t raw_voltage, raw_percent; + + if (this->voltage_sensor_ != nullptr) { + if (!this->read_byte_16(MAX17043_VCELL, &raw_voltage)) { + this->status_set_warning("Unable to read MAX17043_VCELL"); + } else { + float voltage = (1.25 * (float) (raw_voltage >> 4)) / 1000.0; + this->voltage_sensor_->publish_state(voltage); + this->status_clear_warning(); + } + } + if (this->battery_remaining_sensor_ != nullptr) { + if (!this->read_byte_16(MAX17043_SOC, &raw_percent)) { + this->status_set_warning("Unable to read MAX17043_SOC"); + } else { + float percent = (float) ((raw_percent >> 8) + 0.003906f * (raw_percent & 0x00ff)); + this->battery_remaining_sensor_->publish_state(percent); + this->status_clear_warning(); + } + } +} + +void MAX17043Component::setup() { + ESP_LOGCONFIG(TAG, "Setting up MAX17043..."); + + uint16_t config_reg; + if (this->write(&MAX17043_CONFIG, 1) != i2c::ERROR_OK) { + this->status_set_warning(); + return; + } + + if (this->read(reinterpret_cast(&config_reg), 2) != i2c::ERROR_OK) { + this->status_set_warning(); + return; + } + + config_reg = i2c::i2ctohs(config_reg) & MAX17043_CONFIG_SAFE_MASK; + ESP_LOGV(TAG, "MAX17043 CONFIG register reads 0x%X", config_reg); + + if (config_reg != MAX17043_CONFIG_POWER_UP_DEFAULT) { + ESP_LOGE(TAG, "Device does not appear to be a MAX17043"); + this->status_set_error("unrecognised"); + this->mark_failed(); + return; + } + + // need to write back to config register to reset the sleep bit + if (!this->write_byte_16(MAX17043_CONFIG, MAX17043_CONFIG_POWER_UP_DEFAULT)) { + this->status_set_error("sleep reset failed"); + this->mark_failed(); + return; + } +} + +void MAX17043Component::dump_config() { + ESP_LOGCONFIG(TAG, "MAX17043:"); + LOG_I2C_DEVICE(this); + if (this->is_failed()) { + ESP_LOGE(TAG, "Communication with MAX17043 failed"); + } + LOG_UPDATE_INTERVAL(this); + LOG_SENSOR(" ", "Battery Voltage", this->voltage_sensor_); + LOG_SENSOR(" ", "Battery Level", this->battery_remaining_sensor_); +} + +float MAX17043Component::get_setup_priority() const { return setup_priority::DATA; } + +void MAX17043Component::sleep_mode() { + if (!this->is_failed()) { + if (!this->write_byte_16(MAX17043_CONFIG, MAX17043_CONFIG_POWER_UP_DEFAULT | MAX17043_CONFIG_SLEEP_MASK)) { + ESP_LOGW(TAG, "Unable to write the sleep bit to config register"); + this->status_set_warning(); + } + } +} + +} // namespace max17043 +} // namespace esphome diff --git a/esphome/components/max17043/max17043.h b/esphome/components/max17043/max17043.h new file mode 100644 index 0000000000..540b977789 --- /dev/null +++ b/esphome/components/max17043/max17043.h @@ -0,0 +1,29 @@ +#pragma once + +#include "esphome/core/component.h" +#include "esphome/components/sensor/sensor.h" +#include "esphome/components/i2c/i2c.h" + +namespace esphome { +namespace max17043 { + +class MAX17043Component : public PollingComponent, public i2c::I2CDevice { + public: + void setup() override; + void dump_config() override; + float get_setup_priority() const override; + void update() override; + void sleep_mode(); + + void set_voltage_sensor(sensor::Sensor *voltage_sensor) { voltage_sensor_ = voltage_sensor; } + void set_battery_remaining_sensor(sensor::Sensor *battery_remaining_sensor) { + battery_remaining_sensor_ = battery_remaining_sensor; + } + + protected: + sensor::Sensor *voltage_sensor_{nullptr}; + sensor::Sensor *battery_remaining_sensor_{nullptr}; +}; + +} // namespace max17043 +} // namespace esphome diff --git a/esphome/components/max17043/sensor.py b/esphome/components/max17043/sensor.py new file mode 100644 index 0000000000..3da0f953b0 --- /dev/null +++ b/esphome/components/max17043/sensor.py @@ -0,0 +1,77 @@ +from esphome import automation +from esphome.automation import maybe_simple_id +import esphome.codegen as cg +from esphome.components import i2c, sensor +import esphome.config_validation as cv +from esphome.const import ( + CONF_BATTERY_LEVEL, + CONF_BATTERY_VOLTAGE, + CONF_ID, + DEVICE_CLASS_BATTERY, + DEVICE_CLASS_VOLTAGE, + ENTITY_CATEGORY_DIAGNOSTIC, + STATE_CLASS_MEASUREMENT, + UNIT_PERCENT, + UNIT_VOLT, +) + +DEPENDENCIES = ["i2c"] + +max17043_ns = cg.esphome_ns.namespace("max17043") +MAX17043Component = max17043_ns.class_( + "MAX17043Component", cg.PollingComponent, i2c.I2CDevice +) + +# Actions +SleepAction = max17043_ns.class_("SleepAction", automation.Action) + +CONFIG_SCHEMA = ( + cv.Schema( + { + cv.GenerateID(): cv.declare_id(MAX17043Component), + cv.Optional(CONF_BATTERY_VOLTAGE): sensor.sensor_schema( + unit_of_measurement=UNIT_VOLT, + accuracy_decimals=3, + device_class=DEVICE_CLASS_VOLTAGE, + state_class=STATE_CLASS_MEASUREMENT, + entity_category=ENTITY_CATEGORY_DIAGNOSTIC, + ), + cv.Optional(CONF_BATTERY_LEVEL): sensor.sensor_schema( + unit_of_measurement=UNIT_PERCENT, + accuracy_decimals=3, + device_class=DEVICE_CLASS_BATTERY, + state_class=STATE_CLASS_MEASUREMENT, + entity_category=ENTITY_CATEGORY_DIAGNOSTIC, + ), + } + ) + .extend(cv.polling_component_schema("60s")) + .extend(i2c.i2c_device_schema(0x36)) +) + + +async def to_code(config): + var = cg.new_Pvariable(config[CONF_ID]) + await cg.register_component(var, config) + await i2c.register_i2c_device(var, config) + + if voltage_config := config.get(CONF_BATTERY_VOLTAGE): + sens = await sensor.new_sensor(voltage_config) + cg.add(var.set_voltage_sensor(sens)) + + if CONF_BATTERY_LEVEL in config: + sens = await sensor.new_sensor(config[CONF_BATTERY_LEVEL]) + cg.add(var.set_battery_remaining_sensor(sens)) + + +MAX17043_ACTION_SCHEMA = maybe_simple_id( + { + cv.Required(CONF_ID): cv.use_id(MAX17043Component), + } +) + + +@automation.register_action("max17043.sleep_mode", SleepAction, MAX17043_ACTION_SCHEMA) +async def max17043_sleep_mode_to_code(config, action_id, template_arg, args): + paren = await cg.get_variable(config[CONF_ID]) + return cg.new_Pvariable(action_id, template_arg, paren) diff --git a/esphome/components/qspi_amoled/display.py b/esphome/components/qspi_amoled/display.py index 77d1e3d095..00773b516a 100644 --- a/esphome/components/qspi_amoled/display.py +++ b/esphome/components/qspi_amoled/display.py @@ -1,143 +1,3 @@ -import esphome.codegen as cg import esphome.config_validation as cv -from esphome import pins -from esphome.components import ( - spi, - display, -) -from esphome.const import ( - CONF_RESET_PIN, - CONF_ID, - CONF_DIMENSIONS, - CONF_WIDTH, - CONF_HEIGHT, - CONF_LAMBDA, - CONF_BRIGHTNESS, - CONF_ENABLE_PIN, - CONF_MODEL, - CONF_OFFSET_HEIGHT, - CONF_OFFSET_WIDTH, - CONF_INVERT_COLORS, - CONF_MIRROR_X, - CONF_MIRROR_Y, - CONF_SWAP_XY, - CONF_COLOR_ORDER, - CONF_TRANSFORM, -) -DEPENDENCIES = ["spi"] - -qspi_amoled_ns = cg.esphome_ns.namespace("qspi_amoled") -QSPI_AMOLED = qspi_amoled_ns.class_( - "QspiAmoLed", display.Display, display.DisplayBuffer, cg.Component, spi.SPIDevice -) -ColorOrder = display.display_ns.enum("ColorMode") -Model = qspi_amoled_ns.enum("Model") - -MODELS = {"RM690B0": Model.RM690B0, "RM67162": Model.RM67162} - -COLOR_ORDERS = { - "RGB": ColorOrder.COLOR_ORDER_RGB, - "BGR": ColorOrder.COLOR_ORDER_BGR, -} -DATA_PIN_SCHEMA = pins.internal_gpio_output_pin_schema - - -def validate_dimension(value): - value = cv.positive_int(value) - if value % 2 != 0: - raise cv.Invalid("Width/height/offset must be divisible by 2") - return value - - -CONFIG_SCHEMA = cv.All( - display.FULL_DISPLAY_SCHEMA.extend( - cv.Schema( - { - cv.GenerateID(): cv.declare_id(QSPI_AMOLED), - cv.Required(CONF_MODEL): cv.enum(MODELS, upper=True), - cv.Required(CONF_DIMENSIONS): cv.Any( - cv.dimensions, - cv.Schema( - { - cv.Required(CONF_WIDTH): validate_dimension, - cv.Required(CONF_HEIGHT): validate_dimension, - cv.Optional( - CONF_OFFSET_HEIGHT, default=0 - ): validate_dimension, - cv.Optional( - CONF_OFFSET_WIDTH, default=0 - ): validate_dimension, - } - ), - ), - cv.Optional(CONF_TRANSFORM): cv.Schema( - { - cv.Optional(CONF_MIRROR_X, default=False): cv.boolean, - cv.Optional(CONF_MIRROR_Y, default=False): cv.boolean, - cv.Optional(CONF_SWAP_XY, default=False): cv.boolean, - } - ), - cv.Optional(CONF_COLOR_ORDER, default="RGB"): cv.enum( - COLOR_ORDERS, upper=True - ), - cv.Optional(CONF_INVERT_COLORS, default=False): cv.boolean, - cv.Optional(CONF_RESET_PIN): pins.gpio_output_pin_schema, - cv.Optional(CONF_ENABLE_PIN): pins.gpio_output_pin_schema, - cv.Optional(CONF_BRIGHTNESS, default=0xD0): cv.int_range( - 0, 0xFF, min_included=True, max_included=True - ), - } - ).extend( - spi.spi_device_schema( - cs_pin_required=False, - default_mode="MODE0", - default_data_rate=10e6, - quad=True, - ) - ) - ), - cv.only_with_esp_idf, -) - - -async def to_code(config): - var = cg.new_Pvariable(config[CONF_ID]) - await display.register_display(var, config) - await spi.register_spi_device(var, config) - - cg.add(var.set_color_mode(config[CONF_COLOR_ORDER])) - cg.add(var.set_invert_colors(config[CONF_INVERT_COLORS])) - cg.add(var.set_brightness(config[CONF_BRIGHTNESS])) - cg.add(var.set_model(config[CONF_MODEL])) - if enable_pin := config.get(CONF_ENABLE_PIN): - enable = await cg.gpio_pin_expression(enable_pin) - cg.add(var.set_enable_pin(enable)) - - if reset_pin := config.get(CONF_RESET_PIN): - reset = await cg.gpio_pin_expression(reset_pin) - cg.add(var.set_reset_pin(reset)) - - if transform := config.get(CONF_TRANSFORM): - cg.add(var.set_mirror_x(transform[CONF_MIRROR_X])) - cg.add(var.set_mirror_y(transform[CONF_MIRROR_Y])) - cg.add(var.set_swap_xy(transform[CONF_SWAP_XY])) - - if CONF_DIMENSIONS in config: - dimensions = config[CONF_DIMENSIONS] - if isinstance(dimensions, dict): - cg.add(var.set_dimensions(dimensions[CONF_WIDTH], dimensions[CONF_HEIGHT])) - cg.add( - var.set_offsets( - dimensions[CONF_OFFSET_WIDTH], dimensions[CONF_OFFSET_HEIGHT] - ) - ) - else: - (width, height) = dimensions - cg.add(var.set_dimensions(width, height)) - - if lamb := config.get(CONF_LAMBDA): - lambda_ = await cg.process_lambda( - lamb, [(display.DisplayRef, "it")], return_type=cg.void - ) - cg.add(var.set_writer(lambda_)) +CONFIG_SCHEMA = cv.invalid("The qspi_amoled component has been renamed to qspi_dbi") diff --git a/esphome/components/qspi_amoled/__init__.py b/esphome/components/qspi_dbi/__init__.py similarity index 100% rename from esphome/components/qspi_amoled/__init__.py rename to esphome/components/qspi_dbi/__init__.py diff --git a/esphome/components/qspi_dbi/display.py b/esphome/components/qspi_dbi/display.py new file mode 100644 index 0000000000..71ae31f182 --- /dev/null +++ b/esphome/components/qspi_dbi/display.py @@ -0,0 +1,185 @@ +from esphome import pins +import esphome.codegen as cg +from esphome.components import display, spi +import esphome.config_validation as cv +from esphome.const import ( + CONF_BRIGHTNESS, + CONF_COLOR_ORDER, + CONF_DIMENSIONS, + CONF_ENABLE_PIN, + CONF_HEIGHT, + CONF_ID, + CONF_INIT_SEQUENCE, + CONF_INVERT_COLORS, + CONF_LAMBDA, + CONF_MIRROR_X, + CONF_MIRROR_Y, + CONF_MODEL, + CONF_OFFSET_HEIGHT, + CONF_OFFSET_WIDTH, + CONF_RESET_PIN, + CONF_SWAP_XY, + CONF_TRANSFORM, + CONF_WIDTH, +) +from esphome.core import TimePeriod + +from .models import DriverChip + +DEPENDENCIES = ["spi"] + +qspi_dbi_ns = cg.esphome_ns.namespace("qspi_dbi") +QSPI_DBI = qspi_dbi_ns.class_( + "QspiDbi", display.Display, display.DisplayBuffer, cg.Component, spi.SPIDevice +) +ColorOrder = display.display_ns.enum("ColorMode") +Model = qspi_dbi_ns.enum("Model") + +COLOR_ORDERS = { + "RGB": ColorOrder.COLOR_ORDER_RGB, + "BGR": ColorOrder.COLOR_ORDER_BGR, +} +DATA_PIN_SCHEMA = pins.internal_gpio_output_pin_schema + +CONF_DRAW_FROM_ORIGIN = "draw_from_origin" +DELAY_FLAG = 0xFF + + +def validate_dimension(value): + value = cv.positive_int(value) + if value % 2 != 0: + raise cv.Invalid("Width/height/offset must be divisible by 2") + return value + + +def map_sequence(value): + """ + The format is a repeated sequence of [CMD, ] where is s a sequence of bytes. The length is inferred + from the length of the sequence and should not be explicit. + A delay can be inserted by specifying "- delay N" where N is in ms + """ + if isinstance(value, str) and value.lower().startswith("delay "): + value = value.lower()[6:] + delay = cv.All( + cv.positive_time_period_milliseconds, + cv.Range(TimePeriod(milliseconds=1), TimePeriod(milliseconds=255)), + )(value) + return [delay, DELAY_FLAG] + value = cv.Length(min=1, max=254)(value) + params = value[1:] + return [value[0], len(params)] + list(params) + + +def _validate(config): + chip = DriverChip.chips[config[CONF_MODEL]] + if not chip.initsequence: + if CONF_INIT_SEQUENCE not in config: + raise cv.Invalid(f"{chip.name} model requires init_sequence") + return config + + +CONFIG_SCHEMA = cv.All( + display.FULL_DISPLAY_SCHEMA.extend( + cv.Schema( + { + cv.GenerateID(): cv.declare_id(QSPI_DBI), + cv.Required(CONF_MODEL): cv.one_of( + *DriverChip.chips.keys(), upper=True + ), + cv.Optional(CONF_INIT_SEQUENCE): cv.ensure_list(map_sequence), + cv.Required(CONF_DIMENSIONS): cv.Any( + cv.dimensions, + cv.Schema( + { + cv.Required(CONF_WIDTH): validate_dimension, + cv.Required(CONF_HEIGHT): validate_dimension, + cv.Optional( + CONF_OFFSET_HEIGHT, default=0 + ): validate_dimension, + cv.Optional( + CONF_OFFSET_WIDTH, default=0 + ): validate_dimension, + } + ), + ), + cv.Optional(CONF_TRANSFORM): cv.Schema( + { + cv.Optional(CONF_MIRROR_X, default=False): cv.boolean, + cv.Optional(CONF_MIRROR_Y, default=False): cv.boolean, + cv.Optional(CONF_SWAP_XY, default=False): cv.boolean, + } + ), + cv.Optional(CONF_COLOR_ORDER, default="RGB"): cv.enum( + COLOR_ORDERS, upper=True + ), + cv.Optional(CONF_INVERT_COLORS, default=False): cv.boolean, + cv.Optional(CONF_RESET_PIN): pins.gpio_output_pin_schema, + cv.Optional(CONF_ENABLE_PIN): pins.gpio_output_pin_schema, + cv.Optional(CONF_BRIGHTNESS, default=0xD0): cv.int_range( + 0, 0xFF, min_included=True, max_included=True + ), + cv.Optional(CONF_DRAW_FROM_ORIGIN, default=False): cv.boolean, + } + ).extend( + spi.spi_device_schema( + cs_pin_required=False, + default_mode="MODE0", + default_data_rate=10e6, + quad=True, + ) + ) + ), + cv.only_with_esp_idf, +) + + +async def to_code(config): + var = cg.new_Pvariable(config[CONF_ID]) + await display.register_display(var, config) + await spi.register_spi_device(var, config) + + chip = DriverChip.chips[config[CONF_MODEL]] + if chip.initsequence: + cg.add(var.add_init_sequence(chip.initsequence)) + if init_sequences := config.get(CONF_INIT_SEQUENCE): + sequence = [] + for seq in init_sequences: + sequence.extend(seq) + cg.add(var.add_init_sequence(sequence)) + + cg.add(var.set_color_mode(config[CONF_COLOR_ORDER])) + cg.add(var.set_invert_colors(config[CONF_INVERT_COLORS])) + cg.add(var.set_brightness(config[CONF_BRIGHTNESS])) + cg.add(var.set_model(config[CONF_MODEL])) + cg.add(var.set_draw_from_origin(config[CONF_DRAW_FROM_ORIGIN])) + if enable_pin := config.get(CONF_ENABLE_PIN): + enable = await cg.gpio_pin_expression(enable_pin) + cg.add(var.set_enable_pin(enable)) + + if reset_pin := config.get(CONF_RESET_PIN): + reset = await cg.gpio_pin_expression(reset_pin) + cg.add(var.set_reset_pin(reset)) + + if transform := config.get(CONF_TRANSFORM): + cg.add(var.set_mirror_x(transform[CONF_MIRROR_X])) + cg.add(var.set_mirror_y(transform[CONF_MIRROR_Y])) + cg.add(var.set_swap_xy(transform[CONF_SWAP_XY])) + + if CONF_DIMENSIONS in config: + dimensions = config[CONF_DIMENSIONS] + if isinstance(dimensions, dict): + cg.add(var.set_dimensions(dimensions[CONF_WIDTH], dimensions[CONF_HEIGHT])) + cg.add( + var.set_offsets( + dimensions[CONF_OFFSET_WIDTH], dimensions[CONF_OFFSET_HEIGHT] + ) + ) + else: + (width, height) = dimensions + cg.add(var.set_dimensions(width, height)) + + if lamb := config.get(CONF_LAMBDA): + lambda_ = await cg.process_lambda( + lamb, [(display.DisplayRef, "it")], return_type=cg.void + ) + cg.add(var.set_writer(lambda_)) diff --git a/esphome/components/qspi_dbi/models.py b/esphome/components/qspi_dbi/models.py new file mode 100644 index 0000000000..071ea72d73 --- /dev/null +++ b/esphome/components/qspi_dbi/models.py @@ -0,0 +1,64 @@ +# Commands +SW_RESET_CMD = 0x01 +SLEEP_OUT = 0x11 +INVERT_OFF = 0x20 +INVERT_ON = 0x21 +ALL_ON = 0x23 +WRAM = 0x24 +MIPI = 0x26 +DISPLAY_OFF = 0x28 +DISPLAY_ON = 0x29 +RASET = 0x2B +CASET = 0x2A +WDATA = 0x2C +TEON = 0x35 +MADCTL_CMD = 0x36 +PIXFMT = 0x3A +BRIGHTNESS = 0x51 +SWIRE1 = 0x5A +SWIRE2 = 0x5B +PAGESEL = 0xFE + + +class DriverChip: + chips = {} + + def __init__(self, name: str): + name = name.upper() + self.name = name + self.chips[name] = self + self.initsequence = [] + + def cmd(self, c, *args): + """ + Add a command sequence to the init sequence + :param c: The command (8 bit) + :param args: zero or more arguments (8 bit values) + """ + self.initsequence.extend([c, len(args)] + list(args)) + + def delay(self, ms): + self.initsequence.extend([ms, 0xFF]) + + +chip = DriverChip("RM67162") +chip.cmd(PIXFMT, 0x55) +chip.cmd(BRIGHTNESS, 0) + +chip = DriverChip("RM690B0") +chip.cmd(PAGESEL, 0x20) +chip.cmd(MIPI, 0x0A) +chip.cmd(WRAM, 0x80) +chip.cmd(SWIRE1, 0x51) +chip.cmd(SWIRE2, 0x2E) +chip.cmd(PAGESEL, 0x00) +chip.cmd(0xC2, 0x00) +chip.delay(10) +chip.cmd(TEON, 0x00) + +chip = DriverChip("AXS15231") +chip.cmd(0xBB, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5A, 0xA5) +chip.cmd(0xC1, 0x33) +chip.cmd(0xBB, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00) + +DriverChip("Custom") diff --git a/esphome/components/qspi_amoled/qspi_amoled.cpp b/esphome/components/qspi_dbi/qspi_dbi.cpp similarity index 51% rename from esphome/components/qspi_amoled/qspi_amoled.cpp rename to esphome/components/qspi_dbi/qspi_dbi.cpp index b1f651025a..a649a25ea6 100644 --- a/esphome/components/qspi_amoled/qspi_amoled.cpp +++ b/esphome/components/qspi_dbi/qspi_dbi.cpp @@ -1,12 +1,12 @@ #ifdef USE_ESP_IDF -#include "qspi_amoled.h" +#include "qspi_dbi.h" #include "esphome/core/log.h" namespace esphome { -namespace qspi_amoled { +namespace qspi_dbi { -void QspiAmoLed::setup() { - esph_log_config(TAG, "Setting up QSPI_AMOLED"); +void QspiDbi::setup() { + ESP_LOGCONFIG(TAG, "Setting up QSPI_DBI"); this->spi_setup(); if (this->enable_pin_ != nullptr) { this->enable_pin_->setup(); @@ -22,13 +22,17 @@ void QspiAmoLed::setup() { } this->set_timeout(120, [this] { this->write_command_(SLEEP_OUT); }); this->set_timeout(240, [this] { this->write_init_sequence_(); }); + if (this->draw_from_origin_) + check_buffer_(); } -void QspiAmoLed::update() { +void QspiDbi::update() { if (!this->setup_complete_) { return; } this->do_update_(); + if (this->buffer_ == nullptr || this->x_low_ > this->x_high_ || this->y_low_ > this->y_high_) + return; // Start addresses and widths/heights must be divisible by 2 (CASET/RASET restriction in datasheet) if (this->x_low_ % 2 == 1) { this->x_low_--; @@ -42,10 +46,15 @@ void QspiAmoLed::update() { if (this->y_high_ % 2 == 0) { this->y_high_++; } + if (this->draw_from_origin_) { + this->x_low_ = 0; + this->y_low_ = 0; + this->x_high_ = this->width_ - 1; + } int w = this->x_high_ - this->x_low_ + 1; int h = this->y_high_ - this->y_low_ + 1; - this->draw_pixels_at(this->x_low_, this->y_low_, w, h, this->buffer_, this->color_mode_, display::COLOR_BITNESS_565, - true, this->x_low_, this->y_low_, this->get_width_internal() - w - this->x_low_); + this->write_to_display_(this->x_low_, this->y_low_, w, h, this->buffer_, this->x_low_, this->y_low_, + this->width_ - w - this->x_low_); // invalidate watermarks this->x_low_ = this->width_; this->y_low_ = this->height_; @@ -53,21 +62,19 @@ void QspiAmoLed::update() { this->y_high_ = 0; } -void QspiAmoLed::draw_absolute_pixel_internal(int x, int y, Color color) { +void QspiDbi::draw_absolute_pixel_internal(int x, int y, Color color) { if (x >= this->get_width_internal() || x < 0 || y >= this->get_height_internal() || y < 0) { return; } - if (this->buffer_ == nullptr) - this->init_internal_(this->width_ * this->height_ * 2); if (this->is_failed()) return; + check_buffer_(); uint32_t pos = (y * this->width_) + x; - uint16_t new_color; bool updated = false; pos = pos * 2; - new_color = display::ColorUtil::color_to_565(color, display::ColorOrder::COLOR_ORDER_RGB); - if (this->buffer_[pos] != (uint8_t) (new_color >> 8)) { - this->buffer_[pos] = (uint8_t) (new_color >> 8); + uint16_t new_color = display::ColorUtil::color_to_565(color, display::ColorOrder::COLOR_ORDER_RGB); + if (this->buffer_[pos] != static_cast(new_color >> 8)) { + this->buffer_[pos] = static_cast(new_color >> 8); updated = true; } pos = pos + 1; @@ -90,7 +97,7 @@ void QspiAmoLed::draw_absolute_pixel_internal(int x, int y, Color color) { } } -void QspiAmoLed::reset_params_(bool ready) { +void QspiDbi::reset_params_(bool ready) { if (!ready && !this->is_ready()) return; this->write_command_(this->invert_colors_ ? INVERT_ON : INVERT_OFF); @@ -102,55 +109,64 @@ void QspiAmoLed::reset_params_(bool ready) { mad |= MADCTL_MX; if (this->mirror_y_) mad |= MADCTL_MY; - this->write_command_(MADCTL_CMD, &mad, 1); - this->write_command_(BRIGHTNESS, &this->brightness_, 1); + this->write_command_(MADCTL_CMD, mad); + this->write_command_(BRIGHTNESS, this->brightness_); + this->write_command_(NORON); + this->write_command_(DISPLAY_ON); } -void QspiAmoLed::write_init_sequence_() { - if (this->model_ == RM690B0) { - this->write_command_(PAGESEL, 0x20); - this->write_command_(MIPI, 0x0A); - this->write_command_(WRAM, 0x80); - this->write_command_(SWIRE1, 0x51); - this->write_command_(SWIRE2, 0x2E); - this->write_command_(PAGESEL, 0x00); - this->write_command_(0xC2, 0x00); - delay(10); - this->write_command_(TEON, 0x00); +void QspiDbi::write_init_sequence_() { + for (const auto &seq : this->init_sequences_) { + this->write_sequence_(seq); } - this->write_command_(PIXFMT, 0x55); - this->write_command_(BRIGHTNESS, 0); - this->write_command_(DISPLAY_ON); this->reset_params_(true); this->setup_complete_ = true; - esph_log_config(TAG, "QSPI_AMOLED setup complete"); + ESP_LOGCONFIG(TAG, "QSPI_DBI setup complete"); } -void QspiAmoLed::set_addr_window_(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2) { +void QspiDbi::set_addr_window_(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2) { + ESP_LOGVV(TAG, "Set addr %d/%d, %d/%d", x1, y1, x2, y2); uint8_t buf[4]; x1 += this->offset_x_; x2 += this->offset_x_; y1 += this->offset_y_; y2 += this->offset_y_; - put16_be(buf, x1); - put16_be(buf + 2, x2); - this->write_command_(CASET, buf, sizeof buf); put16_be(buf, y1); put16_be(buf + 2, y2); this->write_command_(RASET, buf, sizeof buf); + put16_be(buf, x1); + put16_be(buf + 2, x2); + this->write_command_(CASET, buf, sizeof buf); } -void QspiAmoLed::draw_pixels_at(int x_start, int y_start, int w, int h, const uint8_t *ptr, display::ColorOrder order, - display::ColorBitness bitness, bool big_endian, int x_offset, int y_offset, int x_pad) { +void QspiDbi::draw_pixels_at(int x_start, int y_start, int w, int h, const uint8_t *ptr, display::ColorOrder order, + display::ColorBitness bitness, bool big_endian, int x_offset, int y_offset, int x_pad) { if (!this->setup_complete_ || this->is_failed()) return; if (w <= 0 || h <= 0) return; if (bitness != display::COLOR_BITNESS_565 || order != this->color_mode_ || big_endian != (this->bit_order_ == spi::BIT_ORDER_MSB_FIRST)) { - return display::Display::draw_pixels_at(x_start, y_start, w, h, ptr, order, bitness, big_endian, x_offset, y_offset, - x_pad); + return Display::draw_pixels_at(x_start, y_start, w, h, ptr, order, bitness, big_endian, x_offset, y_offset, x_pad); + } else if (this->draw_from_origin_) { + auto stride = x_offset + w + x_pad; + for (int y = 0; y != h; y++) { + memcpy(this->buffer_ + ((y + y_start) * this->width_ + x_start) * 2, + ptr + ((y + y_offset) * stride + x_offset) * 2, w * 2); + } + ptr = this->buffer_; + w = this->width_; + h += y_start; + x_start = 0; + y_start = 0; + x_offset = 0; + y_offset = 0; } + this->write_to_display_(x_start, y_start, w, h, ptr, x_offset, y_offset, x_pad); +} + +void QspiDbi::write_to_display_(int x_start, int y_start, int w, int h, const uint8_t *ptr, int x_offset, int y_offset, + int x_pad) { this->set_addr_window_(x_start, y_start, x_start + w - 1, y_start + h - 1); this->enable(); // x_ and y_offset are offsets into the source buffer, unrelated to our own offsets into the display. @@ -158,17 +174,50 @@ void QspiAmoLed::draw_pixels_at(int x_start, int y_start, int w, int h, const ui // we could deal here with a non-zero y_offset, but if x_offset is zero, y_offset probably will be so don't bother this->write_cmd_addr_data(8, 0x32, 24, 0x2C00, ptr, w * h * 2, 4); } else { - this->write_cmd_addr_data(8, 0x32, 24, 0x2C00, nullptr, 0, 4); auto stride = x_offset + w + x_pad; + uint16_t cmd = 0x2C00; for (int y = 0; y != h; y++) { - this->write_cmd_addr_data(0, 0, 0, 0, ptr + ((y + y_offset) * stride + x_offset) * 2, w * 2, 4); + this->write_cmd_addr_data(8, 0x32, 24, cmd, ptr + ((y + y_offset) * stride + x_offset) * 2, w * 2, 4); + cmd = 0x3C00; } } this->disable(); } +void QspiDbi::write_command_(uint8_t cmd, const uint8_t *bytes, size_t len) { + ESP_LOGV(TAG, "Command %02X, length %d, bytes %s", cmd, len, format_hex_pretty(bytes, len).c_str()); + this->enable(); + this->write_cmd_addr_data(8, 0x02, 24, cmd << 8, bytes, len); + this->disable(); +} -void QspiAmoLed::dump_config() { - ESP_LOGCONFIG("", "QSPI AMOLED"); +void QspiDbi::write_sequence_(const std::vector &vec) { + size_t index = 0; + while (index != vec.size()) { + if (vec.size() - index < 2) { + ESP_LOGE(TAG, "Malformed init sequence"); + return; + } + uint8_t cmd = vec[index++]; + uint8_t x = vec[index++]; + if (x == DELAY_FLAG) { + ESP_LOGV(TAG, "Delay %dms", cmd); + delay(cmd); + } else { + uint8_t num_args = x & 0x7F; + if (vec.size() - index < num_args) { + ESP_LOGE(TAG, "Malformed init sequence"); + return; + } + const auto *ptr = vec.data() + index; + this->write_command_(cmd, ptr, num_args); + index += num_args; + } + } +} + +void QspiDbi::dump_config() { + ESP_LOGCONFIG("", "QSPI_DBI Display"); + ESP_LOGCONFIG("", "Model: %s", this->model_); ESP_LOGCONFIG(TAG, " Height: %u", this->height_); ESP_LOGCONFIG(TAG, " Width: %u", this->width_); LOG_PIN(" CS Pin: ", this->cs_); @@ -176,6 +225,6 @@ void QspiAmoLed::dump_config() { ESP_LOGCONFIG(TAG, " SPI Data rate: %dMHz", (unsigned) (this->data_rate_ / 1000000)); } -} // namespace qspi_amoled +} // namespace qspi_dbi } // namespace esphome #endif diff --git a/esphome/components/qspi_amoled/qspi_amoled.h b/esphome/components/qspi_dbi/qspi_dbi.h similarity index 80% rename from esphome/components/qspi_amoled/qspi_amoled.h rename to esphome/components/qspi_dbi/qspi_dbi.h index c766b4e685..ebb65a8a05 100644 --- a/esphome/components/qspi_amoled/qspi_amoled.h +++ b/esphome/components/qspi_dbi/qspi_dbi.h @@ -14,11 +14,12 @@ #include "esp_lcd_panel_rgb.h" namespace esphome { -namespace qspi_amoled { +namespace qspi_dbi { -constexpr static const char *const TAG = "display.qspi_amoled"; +constexpr static const char *const TAG = "display.qspi_dbi"; static const uint8_t SW_RESET_CMD = 0x01; static const uint8_t SLEEP_OUT = 0x11; +static const uint8_t NORON = 0x13; static const uint8_t INVERT_OFF = 0x20; static const uint8_t INVERT_ON = 0x21; static const uint8_t ALL_ON = 0x23; @@ -42,6 +43,7 @@ static const uint8_t MADCTL_MV = 0x20; ///< Bit 5 Reverse Mode static const uint8_t MADCTL_RGB = 0x00; ///< Bit 3 Red-Green-Blue pixel order static const uint8_t MADCTL_BGR = 0x08; ///< Bit 3 Blue-Green-Red pixel order +static const uint8_t DELAY_FLAG = 0xFF; // store a 16 bit value in a buffer, big endian. static inline void put16_be(uint8_t *buf, uint16_t value) { buf[0] = value >> 8; @@ -49,15 +51,16 @@ static inline void put16_be(uint8_t *buf, uint16_t value) { } enum Model { + CUSTOM, RM690B0, RM67162, }; -class QspiAmoLed : public display::DisplayBuffer, - public spi::SPIDevice { +class QspiDbi : public display::DisplayBuffer, + public spi::SPIDevice { public: - void set_model(Model model) { this->model_ = model; } + void set_model(const char *model) { this->model_ = model; } void update() override; void setup() override; display::ColorOrder get_color_mode() { return this->color_mode_; } @@ -93,17 +96,27 @@ class QspiAmoLed : public display::DisplayBuffer, this->offset_x_ = offset_x; this->offset_y_ = offset_y; } + + void set_draw_from_origin(bool draw_from_origin) { this->draw_from_origin_ = draw_from_origin; } display::DisplayType get_display_type() override { return display::DisplayType::DISPLAY_TYPE_COLOR; } void dump_config() override; int get_width_internal() override { return this->width_; } int get_height_internal() override { return this->height_; } bool can_proceed() override { return this->setup_complete_; } + void add_init_sequence(const std::vector &sequence) { this->init_sequences_.push_back(sequence); } protected: + void check_buffer_() { + if (this->buffer_ == nullptr) + this->init_internal_(this->width_ * this->height_ * 2); + } + void write_sequence_(const std::vector &vec); void draw_absolute_pixel_internal(int x, int y, Color color) override; void draw_pixels_at(int x_start, int y_start, int w, int h, const uint8_t *ptr, display::ColorOrder order, display::ColorBitness bitness, bool big_endian, int x_offset, int y_offset, int x_pad) override; + void write_to_display_(int x_start, int y_start, int w, int h, const uint8_t *ptr, int x_offset, int y_offset, + int x_pad); /** * the RM67162 in quad SPI mode seems to work like this (not in the datasheet, this is deduced from the * sample code.) @@ -122,11 +135,7 @@ class QspiAmoLed : public display::DisplayBuffer, * @param bytes * @param len */ - void write_command_(uint8_t cmd, const uint8_t *bytes, size_t len) { - this->enable(); - this->write_cmd_addr_data(8, 0x02, 24, cmd << 8, bytes, len); - this->disable(); - } + void write_command_(uint8_t cmd, const uint8_t *bytes, size_t len); void write_command_(uint8_t cmd, uint8_t data) { this->write_command_(cmd, &data, 1); } void write_command_(uint8_t cmd) { this->write_command_(cmd, &cmd, 0); } @@ -136,8 +145,8 @@ class QspiAmoLed : public display::DisplayBuffer, GPIOPin *reset_pin_{nullptr}; GPIOPin *enable_pin_{nullptr}; - uint16_t x_low_{0}; - uint16_t y_low_{0}; + uint16_t x_low_{1}; + uint16_t y_low_{1}; uint16_t x_high_{0}; uint16_t y_high_{0}; bool setup_complete_{}; @@ -151,12 +160,14 @@ class QspiAmoLed : public display::DisplayBuffer, bool swap_xy_{}; bool mirror_x_{}; bool mirror_y_{}; + bool draw_from_origin_{false}; uint8_t brightness_{0xD0}; - Model model_{RM690B0}; + const char *model_{"Unknown"}; + std::vector> init_sequences_{}; esp_lcd_panel_handle_t handle_{}; }; -} // namespace qspi_amoled +} // namespace qspi_dbi } // namespace esphome #endif diff --git a/esphome/components/shelly_dimmer/shelly_dimmer.cpp b/esphome/components/shelly_dimmer/shelly_dimmer.cpp index 144236bfe1..b415840bdc 100644 --- a/esphome/components/shelly_dimmer/shelly_dimmer.cpp +++ b/esphome/components/shelly_dimmer/shelly_dimmer.cpp @@ -64,46 +64,46 @@ uint16_t shelly_dimmer_checksum(const uint8_t *buf, int len) { return std::accumulate(buf, buf + len, 0); } +bool ShellyDimmer::is_running_configured_version() const { + return this->version_major_ == USE_SHD_FIRMWARE_MAJOR_VERSION && + this->version_minor_ == USE_SHD_FIRMWARE_MINOR_VERSION; +} + +void ShellyDimmer::handle_firmware() { + // Reset the STM32 and check the firmware version. + this->reset_normal_boot_(); + this->send_command_(SHELLY_DIMMER_PROTO_CMD_VERSION, nullptr, 0); + ESP_LOGI(TAG, "STM32 current firmware version: %d.%d, desired version: %d.%d", this->version_major_, + this->version_minor_, USE_SHD_FIRMWARE_MAJOR_VERSION, USE_SHD_FIRMWARE_MINOR_VERSION); + + if (!is_running_configured_version()) { +#ifdef USE_SHD_FIRMWARE_DATA + if (!this->upgrade_firmware_()) { + ESP_LOGW(TAG, "Failed to upgrade firmware"); + this->mark_failed(); + return; + } + + this->reset_normal_boot_(); + this->send_command_(SHELLY_DIMMER_PROTO_CMD_VERSION, nullptr, 0); + if (!is_running_configured_version()) { + ESP_LOGE(TAG, "STM32 firmware upgrade already performed, but version is still incorrect"); + this->mark_failed(); + return; + } +#else + ESP_LOGW(TAG, "Firmware version mismatch, put 'update: true' in the yaml to flash an update."); +#endif + } +} + void ShellyDimmer::setup() { this->pin_nrst_->setup(); this->pin_boot0_->setup(); ESP_LOGI(TAG, "Initializing Shelly Dimmer..."); - // Reset the STM32 and check the firmware version. - for (int i = 0; i < 2; i++) { - this->reset_normal_boot_(); - this->send_command_(SHELLY_DIMMER_PROTO_CMD_VERSION, nullptr, 0); - ESP_LOGI(TAG, "STM32 current firmware version: %d.%d, desired version: %d.%d", this->version_major_, - this->version_minor_, USE_SHD_FIRMWARE_MAJOR_VERSION, USE_SHD_FIRMWARE_MINOR_VERSION); - if (this->version_major_ != USE_SHD_FIRMWARE_MAJOR_VERSION || - this->version_minor_ != USE_SHD_FIRMWARE_MINOR_VERSION) { -#ifdef USE_SHD_FIRMWARE_DATA - // Update firmware if needed. - ESP_LOGW(TAG, "Unsupported STM32 firmware version, flashing"); - if (i > 0) { - // Upgrade was already performed but the reported version is still not right. - ESP_LOGE(TAG, "STM32 firmware upgrade already performed, but version is still incorrect"); - this->mark_failed(); - return; - } - - if (!this->upgrade_firmware_()) { - ESP_LOGW(TAG, "Failed to upgrade firmware"); - this->mark_failed(); - return; - } - - // Firmware upgrade completed, do the checks again. - continue; -#else - ESP_LOGW(TAG, "Firmware version mismatch, put 'update: true' in the yaml to flash an update."); - this->mark_failed(); - return; -#endif - } - break; - } + this->handle_firmware(); this->send_settings_(); // Do an immediate poll to refresh current state. diff --git a/esphome/components/shelly_dimmer/shelly_dimmer.h b/esphome/components/shelly_dimmer/shelly_dimmer.h index 4701f3a32a..fd75caa797 100644 --- a/esphome/components/shelly_dimmer/shelly_dimmer.h +++ b/esphome/components/shelly_dimmer/shelly_dimmer.h @@ -20,6 +20,8 @@ class ShellyDimmer : public PollingComponent, public light::LightOutput, public public: float get_setup_priority() const override { return setup_priority::LATE; } + bool is_running_configured_version() const; + void handle_firmware(); void setup() override; void update() override; void dump_config() override; diff --git a/esphome/components/st7701s/display.py b/esphome/components/st7701s/display.py index 9310e9d760..e73c2467da 100644 --- a/esphome/components/st7701s/display.py +++ b/esphome/components/st7701s/display.py @@ -18,6 +18,7 @@ from esphome.const import ( CONF_HSYNC_PIN, CONF_ID, CONF_IGNORE_STRAPPING_WARNING, + CONF_INIT_SEQUENCE, CONF_INVERT_COLORS, CONF_LAMBDA, CONF_MIRROR_X, @@ -35,7 +36,6 @@ from esphome.core import TimePeriod from .init_sequences import ST7701S_INITS, cmd -CONF_INIT_SEQUENCE = "init_sequence" CONF_DE_PIN = "de_pin" CONF_PCLK_PIN = "pclk_pin" diff --git a/esphome/components/statsd/statsd.cpp b/esphome/components/statsd/statsd.cpp index 68b24908d2..b7fad19332 100644 --- a/esphome/components/statsd/statsd.cpp +++ b/esphome/components/statsd/statsd.cpp @@ -2,6 +2,7 @@ #include "statsd.h" +#ifdef USE_NETWORK namespace esphome { namespace statsd { @@ -154,3 +155,4 @@ void StatsdComponent::send_(std::string *out) { } // namespace statsd } // namespace esphome +#endif diff --git a/esphome/components/statsd/statsd.h b/esphome/components/statsd/statsd.h index ef42579587..34f84cbe00 100644 --- a/esphome/components/statsd/statsd.h +++ b/esphome/components/statsd/statsd.h @@ -3,6 +3,7 @@ #include #include "esphome/core/defines.h" +#ifdef USE_NETWORK #include "esphome/core/component.h" #include "esphome/components/socket/socket.h" #include "esphome/components/network/ip_address.h" @@ -84,3 +85,4 @@ class StatsdComponent : public PollingComponent { } // namespace statsd } // namespace esphome +#endif diff --git a/esphome/components/tc74/__init__.py b/esphome/components/tc74/__init__.py new file mode 100644 index 0000000000..c1407c7cad --- /dev/null +++ b/esphome/components/tc74/__init__.py @@ -0,0 +1 @@ +CODEOWNERS = ["@sethgirvan"] diff --git a/esphome/components/tc74/sensor.py b/esphome/components/tc74/sensor.py new file mode 100644 index 0000000000..18fc2d9a42 --- /dev/null +++ b/esphome/components/tc74/sensor.py @@ -0,0 +1,32 @@ +import esphome.codegen as cg +from esphome.components import i2c, sensor +import esphome.config_validation as cv +from esphome.const import ( + DEVICE_CLASS_TEMPERATURE, + STATE_CLASS_MEASUREMENT, + UNIT_CELSIUS, +) + +CODEOWNERS = ["@sethgirvan"] +DEPENDENCIES = ["i2c"] + +tc74_ns = cg.esphome_ns.namespace("tc74") +TC74Component = tc74_ns.class_("TC74Component", cg.PollingComponent, i2c.I2CDevice) + +CONFIG_SCHEMA = ( + sensor.sensor_schema( + TC74Component, + unit_of_measurement=UNIT_CELSIUS, + accuracy_decimals=1, + device_class=DEVICE_CLASS_TEMPERATURE, + state_class=STATE_CLASS_MEASUREMENT, + ) + .extend(cv.polling_component_schema("60s")) + .extend(i2c.i2c_device_schema(0x48)) +) + + +async def to_code(config): + var = await sensor.new_sensor(config) + await cg.register_component(var, config) + await i2c.register_i2c_device(var, config) diff --git a/esphome/components/tc74/tc74.cpp b/esphome/components/tc74/tc74.cpp new file mode 100644 index 0000000000..2acb71f921 --- /dev/null +++ b/esphome/components/tc74/tc74.cpp @@ -0,0 +1,68 @@ +// Based on the TC74 datasheet https://ww1.microchip.com/downloads/en/DeviceDoc/21462D.pdf + +#include "tc74.h" +#include "esphome/core/log.h" + +namespace esphome { +namespace tc74 { + +static const char *const TAG = "tc74"; + +static const uint8_t TC74_REGISTER_TEMPERATURE = 0x00; +static const uint8_t TC74_REGISTER_CONFIGURATION = 0x01; +static const uint8_t TC74_DATA_READY_MASK = 0x40; + +// It is possible the "Data Ready" bit will not be set if the TC74 has not been powered on for at least 250ms, so it not +// being set does not constitute a failure. +void TC74Component::setup() { + ESP_LOGCONFIG(TAG, "Setting up TC74..."); + uint8_t config_reg; + if (this->read_register(TC74_REGISTER_CONFIGURATION, &config_reg, 1) != i2c::ERROR_OK) { + this->mark_failed(); + return; + } + this->data_ready_ = config_reg & TC74_DATA_READY_MASK; +} + +void TC74Component::update() { this->read_temperature_(); } + +void TC74Component::dump_config() { + LOG_SENSOR("", "TC74", this); + LOG_I2C_DEVICE(this); + if (this->is_failed()) { + ESP_LOGE(TAG, "Connection with TC74 failed!"); + } + LOG_UPDATE_INTERVAL(this); +} + +void TC74Component::read_temperature_() { + if (!this->data_ready_) { + uint8_t config_reg; + if (this->read_register(TC74_REGISTER_CONFIGURATION, &config_reg, 1) != i2c::ERROR_OK) { + this->status_set_warning(); + return; + } + + if (config_reg & TC74_DATA_READY_MASK) { + this->data_ready_ = true; + } else { + ESP_LOGD(TAG, "TC74 not ready"); + return; + } + } + + uint8_t temperature_reg; + if (this->read_register(TC74_REGISTER_TEMPERATURE, &temperature_reg, 1) != i2c::ERROR_OK) { + this->status_set_warning(); + return; + } + + ESP_LOGD(TAG, "Got Temperature=%d °C", temperature_reg); + this->publish_state(temperature_reg); + this->status_clear_warning(); +} + +float TC74Component::get_setup_priority() const { return setup_priority::DATA; } + +} // namespace tc74 +} // namespace esphome diff --git a/esphome/components/tc74/tc74.h b/esphome/components/tc74/tc74.h new file mode 100644 index 0000000000..5d70c05420 --- /dev/null +++ b/esphome/components/tc74/tc74.h @@ -0,0 +1,28 @@ +#pragma once + +#include "esphome/core/component.h" +#include "esphome/components/sensor/sensor.h" +#include "esphome/components/i2c/i2c.h" + +namespace esphome { +namespace tc74 { + +class TC74Component : public PollingComponent, public i2c::I2CDevice, public sensor::Sensor { + public: + /// Setup the sensor and check connection. + void setup() override; + void dump_config() override; + /// Update the sensor value (temperature). + void update() override; + + float get_setup_priority() const override; + + protected: + /// Internal method to read the temperature from the component after it has been scheduled. + void read_temperature_(); + + bool data_ready_ = false; +}; + +} // namespace tc74 +} // namespace esphome diff --git a/esphome/components/touchscreen/touchscreen.cpp b/esphome/components/touchscreen/touchscreen.cpp index b9498de152..dfe723aedf 100644 --- a/esphome/components/touchscreen/touchscreen.cpp +++ b/esphome/components/touchscreen/touchscreen.cpp @@ -18,8 +18,8 @@ void Touchscreen::attach_interrupt_(InternalGPIOPin *irq_pin, esphome::gpio::Int void Touchscreen::call_setup() { if (this->display_ != nullptr) { - this->display_width_ = this->display_->get_native_width(); - this->display_height_ = this->display_->get_native_height(); + this->display_width_ = this->display_->get_width(); + this->display_height_ = this->display_->get_height(); } PollingComponent::call_setup(); } diff --git a/esphome/components/web_server/web_server.cpp b/esphome/components/web_server/web_server.cpp index 192feb78d5..0467023039 100644 --- a/esphome/components/web_server/web_server.cpp +++ b/esphome/components/web_server/web_server.cpp @@ -1441,9 +1441,26 @@ std::string WebServer::alarm_control_panel_json(alarm_control_panel::AlarmContro void WebServer::on_event(event::Event *obj, const std::string &event_type) { this->events_.send(this->event_json(obj, event_type, DETAIL_STATE).c_str(), "state"); } +void WebServer::handle_event_request(AsyncWebServerRequest *request, const UrlMatch &match) { + for (event::Event *obj : App.get_events()) { + if (obj->get_object_id() != match.id) + continue; + if (request->method() == HTTP_GET && match.method.empty()) { + auto detail = DETAIL_STATE; + auto *param = request->getParam("detail"); + if (param && param->value() == "all") { + detail = DETAIL_ALL; + } + std::string data = this->event_json(obj, "", detail); + request->send(200, "application/json", data.c_str()); + return; + } + } + request->send(404); +} std::string WebServer::event_json(event::Event *obj, const std::string &event_type, JsonDetail start_config) { - return json::build_json([obj, event_type, start_config](JsonObject root) { + return json::build_json([this, obj, event_type, start_config](JsonObject root) { set_json_id(root, obj, "event-" + obj->get_object_id(), start_config); if (!event_type.empty()) { root["event_type"] = event_type; @@ -1454,6 +1471,12 @@ std::string WebServer::event_json(event::Event *obj, const std::string &event_ty event_types.add(event_type); } root["device_class"] = obj->get_device_class(); + if (this->sorting_entitys_.find(obj) != this->sorting_entitys_.end()) { + root["sorting_weight"] = this->sorting_entitys_[obj].weight; + if (this->sorting_groups_.find(this->sorting_entitys_[obj].group_id) != this->sorting_groups_.end()) { + root["sorting_group"] = this->sorting_groups_[this->sorting_entitys_[obj].group_id].name; + } + } } }); } @@ -1645,6 +1668,11 @@ bool WebServer::canHandle(AsyncWebServerRequest *request) { return true; #endif +#ifdef USE_EVENT + if (request->method() == HTTP_GET && match.domain == "event") + return true; +#endif + #ifdef USE_UPDATE if ((request->method() == HTTP_POST || request->method() == HTTP_GET) && match.domain == "update") return true; diff --git a/esphome/components/web_server/web_server.h b/esphome/components/web_server/web_server.h index ea1f62fc43..8edb678169 100644 --- a/esphome/components/web_server/web_server.h +++ b/esphome/components/web_server/web_server.h @@ -322,6 +322,9 @@ class WebServer : public Controller, public Component, public AsyncWebHandler { #ifdef USE_EVENT void on_event(event::Event *obj, const std::string &event_type) override; + /// Handle a event request under '/event'. + void handle_event_request(AsyncWebServerRequest *request, const UrlMatch &match); + /// Dump the event details with its value as a JSON string. std::string event_json(event::Event *obj, const std::string &event_type, JsonDetail start_config); #endif diff --git a/esphome/const.py b/esphome/const.py index 16f30c179d..a3a4318d69 100644 --- a/esphome/const.py +++ b/esphome/const.py @@ -49,6 +49,7 @@ CONF_ADDRESS = "address" CONF_ADDRESSABLE_LIGHT_ID = "addressable_light_id" CONF_ADVANCED = "advanced" CONF_AFTER = "after" +CONF_ALL = "all" CONF_ALLOW_OTHER_USES = "allow_other_uses" CONF_ALPHA = "alpha" CONF_ALTITUDE = "altitude" @@ -57,6 +58,7 @@ CONF_AMMONIA = "ammonia" CONF_ANALOG = "analog" CONF_AND = "and" CONF_ANGLE = "angle" +CONF_ANY = "any" CONF_AP = "ap" CONF_APPARENT_POWER = "apparent_power" CONF_ARDUINO_VERSION = "arduino_version" @@ -396,8 +398,10 @@ CONF_INCLUDES = "includes" CONF_INDEX = "index" CONF_INDOOR = "indoor" CONF_INFRARED = "infrared" +CONF_INIT_SEQUENCE = "init_sequence" CONF_INITIAL_MODE = "initial_mode" CONF_INITIAL_OPTION = "initial_option" +CONF_INITIAL_STATE = "initial_state" CONF_INITIAL_VALUE = "initial_value" CONF_INPUT = "input" CONF_INTEGRATION_TIME = "integration_time" diff --git a/esphome/core/helpers.h b/esphome/core/helpers.h index 7df4b84230..7f6fe9bfdc 100644 --- a/esphome/core/helpers.h +++ b/esphome/core/helpers.h @@ -651,35 +651,45 @@ void delay_microseconds_safe(uint32_t us); /// @name Memory management ///@{ -/** An STL allocator that uses SPI RAM. +/** An STL allocator that uses SPI or internal RAM. + * Returns `nullptr` in case no memory is available. * - * By setting flags, it can be configured to don't try main memory if SPI RAM is full or unavailable, and to return - * `nulllptr` instead of aborting when no memory is available. + * By setting flags, it can be configured to: + * - perform external allocation falling back to main memory if SPI RAM is full or unavailable + * - perform external allocation only + * - perform internal allocation only */ -template class ExternalRAMAllocator { +template class RAMAllocator { public: using value_type = T; enum Flags { - NONE = 0, - REFUSE_INTERNAL = 1 << 0, ///< Refuse falling back to internal memory when external RAM is full or unavailable. - ALLOW_FAILURE = 1 << 1, ///< Don't abort when memory allocation fails. + NONE = 0, // Perform external allocation and fall back to internal memory + ALLOC_EXTERNAL = 1 << 0, // Perform external allocation only. + ALLOC_INTERNAL = 1 << 1, // Perform internal allocation only. + ALLOW_FAILURE = 1 << 2, // Does nothing. Kept for compatibility. }; - ExternalRAMAllocator() = default; - ExternalRAMAllocator(Flags flags) : flags_{flags} {} - template constexpr ExternalRAMAllocator(const ExternalRAMAllocator &other) : flags_{other.flags_} {} + RAMAllocator() = default; + RAMAllocator(uint8_t flags) : flags_{flags} {} + template constexpr RAMAllocator(const RAMAllocator &other) : flags_{other.flags_} {} T *allocate(size_t n) { size_t size = n * sizeof(T); T *ptr = nullptr; #ifdef USE_ESP32 - ptr = static_cast(heap_caps_malloc(size, MALLOC_CAP_SPIRAM | MALLOC_CAP_8BIT)); -#endif - if (ptr == nullptr && (this->flags_ & Flags::REFUSE_INTERNAL) == 0) + // External allocation by default or if explicitely requested + if ((this->flags_ & Flags::ALLOC_EXTERNAL) || ((this->flags_ & Flags::ALLOC_INTERNAL) == 0)) { + ptr = static_cast(heap_caps_malloc(size, MALLOC_CAP_SPIRAM | MALLOC_CAP_8BIT)); + } + // Fallback to internal allocation if explicitely requested or no flag is specified + if (ptr == nullptr && ((this->flags_ & Flags::ALLOC_INTERNAL) || (this->flags_ & Flags::ALLOC_EXTERNAL) == 0)) { ptr = static_cast(malloc(size)); // NOLINT(cppcoreguidelines-owning-memory,cppcoreguidelines-no-malloc) - if (ptr == nullptr && (this->flags_ & Flags::ALLOW_FAILURE) == 0) - abort(); + } +#else + // Ignore ALLOC_EXTERNAL/ALLOC_INTERNAL flags if external allocation is not supported + ptr = static_cast(malloc(size)); // NOLINT(cppcoreguidelines-owning-memory,cppcoreguidelines-no-malloc) +#endif return ptr; } @@ -688,9 +698,11 @@ template class ExternalRAMAllocator { } private: - Flags flags_{Flags::ALLOW_FAILURE}; + uint8_t flags_{Flags::ALLOW_FAILURE}; }; +template using ExternalRAMAllocator = RAMAllocator; + /// @} /// @name Internal functions diff --git a/requirements.txt b/requirements.txt index 3ffd364d87..c03a9f181a 100644 --- a/requirements.txt +++ b/requirements.txt @@ -1,7 +1,7 @@ async_timeout==4.0.3; python_version <= "3.10" cryptography==43.0.0 voluptuous==0.14.2 -PyYAML==6.0.1 +PyYAML==6.0.2 paho-mqtt==1.6.1 colorama==0.4.6 icmplib==3.0.4 @@ -9,7 +9,7 @@ tornado==6.4 tzlocal==5.2 # from time tzdata>=2021.1 # from time pyserial==3.5 -platformio==6.1.15 # When updating platformio, also update Dockerfile +platformio==6.1.16 # When updating platformio, also update Dockerfile esptool==4.7.0 click==8.1.7 esphome-dashboard==20240620.0 diff --git a/script/test_build_components b/script/test_build_components index e885294b99..62fe0f1b55 100755 --- a/script/test_build_components +++ b/script/test_build_components @@ -2,6 +2,15 @@ set -e +help() { + echo "Usage: $0 [-e ] [-c ] [-t ]" 1>&2 + echo 1>&2 + echo " - e - Parameter for esphome command. Default compile. Common alternative is config." 1>&2 + echo " - c - Component folder name to test. Default *. E.g. '-c logger'." 1>&2 + echo " - t - Target name to test. Put '-t list' to display all possibilities. E.g. '-t esp32-s2-idf-51'." 1>&2 + exit 1 +} + # Parse parameter: # - `e` - Parameter for `esphome` command. Default `compile`. Common alternative is `config`. # - `c` - Component folder name to test. Default `*`. @@ -13,7 +22,7 @@ do e) esphome_command=${OPTARG};; c) target_component=${OPTARG};; t) requested_target_platform=${OPTARG};; - \?) echo "Usage: $0 [-e ] [-c ] [-t ]" 1>&2; exit 1;; + \?) help;; esac done @@ -24,8 +33,8 @@ if ! [ -d "./tests/test_build_components/build" ]; then fi start_esphome() { - if [ -n "$requested_target_platform" ] && [ "$requested_target_platform" != "$target_platform" ]; then - echo "Skiping $target_platform" + if [ -n "$requested_target_platform" ] && [ "$requested_target_platform" != "$target_platform_with_version" ]; then + echo "Skipping $target_platform_with_version" return fi # create dynamic yaml file in `build` folder. diff --git a/tests/components/display/common.yaml b/tests/components/display/common.yaml index 1df2665067..4fc4fafa25 100644 --- a/tests/components/display/common.yaml +++ b/tests/components/display/common.yaml @@ -34,3 +34,7 @@ display: it.line_at_angle(centerX, centerY, minuteAngle, radius - 5, radius); } + + // Nice ring around and some gauge + it.filled_ring(centerX, centerY, radius+5, radius+8); + it.filled_gauge(centerX, centerY, radius/2, radius/2-5, 66); diff --git a/tests/components/light/common.yaml b/tests/components/light/common.yaml new file mode 100644 index 0000000000..a224dbe8bc --- /dev/null +++ b/tests/components/light/common.yaml @@ -0,0 +1,125 @@ +esphome: + on_boot: + then: + - light.toggle: test_binary_light + - light.turn_off: test_rgb_light + - light.turn_on: + id: test_rgb_light + brightness: 100% + red: 100% + green: 100% + blue: 1.0 + - light.control: + id: test_monochromatic_light + state: on + - light.dim_relative: + id: test_monochromatic_light + relative_brightness: 5% + brightness_limits: + max_brightness: 90% + +light: + - platform: binary + id: test_binary_light + name: Binary Light + output: test_binary + effects: + - strobe: + on_state: + - logger.log: Binary light state changed + - platform: monochromatic + id: test_monochromatic_light + name: Monochromatic Light + output: test_ledc_1 + gamma_correct: 2.8 + default_transition_length: 2s + effects: + - strobe: + - flicker: + - flicker: + name: My Flicker + alpha: 98% + intensity: 1.5% + - lambda: + name: My Custom Effect + update_interval: 1s + lambda: |- + static int state = 0; + state += 1; + if (state == 4) + state = 0; + - pulse: + transition_length: 10s + update_interval: 20s + min_brightness: 10% + max_brightness: 90% + - pulse: + name: pulse2 + transition_length: + on_length: 10s + off_length: 5s + update_interval: 15s + min_brightness: 10% + max_brightness: 90% + - platform: rgb + id: test_rgb_light + name: RGB Light + red: test_ledc_1 + green: test_ledc_2 + blue: test_ledc_3 + - platform: rgbw + id: test_rgbw_light + name: RGBW Light + red: test_ledc_1 + green: test_ledc_2 + blue: test_ledc_3 + white: test_ledc_4 + color_interlock: true + - platform: rgbww + id: test_rgbww_light + name: RGBWW Light + red: test_ledc_1 + green: test_ledc_2 + blue: test_ledc_3 + cold_white: test_ledc_4 + warm_white: test_ledc_5 + cold_white_color_temperature: 153 mireds + warm_white_color_temperature: 500 mireds + color_interlock: true + - platform: rgbct + id: test_rgbct_light + name: RGBCT Light + red: test_ledc_1 + green: test_ledc_2 + blue: test_ledc_3 + color_temperature: test_ledc_4 + white_brightness: test_ledc_5 + cold_white_color_temperature: 153 mireds + warm_white_color_temperature: 500 mireds + color_interlock: true + - platform: cwww + id: test_cwww_light + name: CWWW Light + cold_white: test_ledc_1 + warm_white: test_ledc_2 + cold_white_color_temperature: 153 mireds + warm_white_color_temperature: 500 mireds + constant_brightness: true + - platform: color_temperature + id: test_color_temperature_light + name: CT Light + color_temperature: test_ledc_1 + brightness: test_ledc_2 + cold_white_color_temperature: 153 mireds + warm_white_color_temperature: 500 mireds + - platform: rgb + id: test_rgb_light_initial_state + name: RGB Light + red: test_ledc_1 + green: test_ledc_2 + blue: test_ledc_3 + initial_state: + color_mode: rgb + red: 100% + green: 50% + blue: 50% diff --git a/tests/components/light/test.esp32-ard.yaml b/tests/components/light/test.esp32-ard.yaml index 1d0b4cd8f0..925197182c 100644 --- a/tests/components/light/test.esp32-ard.yaml +++ b/tests/components/light/test.esp32-ard.yaml @@ -1,23 +1,3 @@ -esphome: - on_boot: - then: - - light.toggle: test_binary_light - - light.turn_off: test_rgb_light - - light.turn_on: - id: test_rgb_light - brightness: 100% - red: 100% - green: 100% - blue: 1.0 - - light.control: - id: test_monochromatic_light - state: on - - light.dim_relative: - id: test_monochromatic_light - relative_brightness: 5% - brightness_limits: - max_brightness: 90% - output: - platform: gpio id: test_binary @@ -38,97 +18,4 @@ output: id: test_ledc_5 pin: 17 -light: - - platform: binary - id: test_binary_light - name: Binary Light - output: test_binary - effects: - - strobe: - on_state: - - logger.log: Binary light state changed - - platform: monochromatic - id: test_monochromatic_light - name: Monochromatic Light - output: test_ledc_1 - gamma_correct: 2.8 - default_transition_length: 2s - effects: - - strobe: - - flicker: - - flicker: - name: My Flicker - alpha: 98% - intensity: 1.5% - - lambda: - name: My Custom Effect - update_interval: 1s - lambda: |- - static int state = 0; - state += 1; - if (state == 4) - state = 0; - - pulse: - transition_length: 10s - update_interval: 20s - min_brightness: 10% - max_brightness: 90% - - pulse: - name: pulse2 - transition_length: - on_length: 10s - off_length: 5s - update_interval: 15s - min_brightness: 10% - max_brightness: 90% - - platform: rgb - id: test_rgb_light - name: RGB Light - red: test_ledc_1 - green: test_ledc_2 - blue: test_ledc_3 - - platform: rgbw - id: test_rgbw_light - name: RGBW Light - red: test_ledc_1 - green: test_ledc_2 - blue: test_ledc_3 - white: test_ledc_4 - color_interlock: true - - platform: rgbww - id: test_rgbww_light - name: RGBWW Light - red: test_ledc_1 - green: test_ledc_2 - blue: test_ledc_3 - cold_white: test_ledc_4 - warm_white: test_ledc_5 - cold_white_color_temperature: 153 mireds - warm_white_color_temperature: 500 mireds - color_interlock: true - - platform: rgbct - id: test_rgbct_light - name: RGBCT Light - red: test_ledc_1 - green: test_ledc_2 - blue: test_ledc_3 - color_temperature: test_ledc_4 - white_brightness: test_ledc_5 - cold_white_color_temperature: 153 mireds - warm_white_color_temperature: 500 mireds - color_interlock: true - - platform: cwww - id: test_cwww_light - name: CWWW Light - cold_white: test_ledc_1 - warm_white: test_ledc_2 - cold_white_color_temperature: 153 mireds - warm_white_color_temperature: 500 mireds - constant_brightness: true - - platform: color_temperature - id: test_color_temperature_light - name: CT Light - color_temperature: test_ledc_1 - brightness: test_ledc_2 - cold_white_color_temperature: 153 mireds - warm_white_color_temperature: 500 mireds +<<: !include common.yaml diff --git a/tests/components/light/test.esp32-c3-ard.yaml b/tests/components/light/test.esp32-c3-ard.yaml index 79171805a6..317d5748a3 100644 --- a/tests/components/light/test.esp32-c3-ard.yaml +++ b/tests/components/light/test.esp32-c3-ard.yaml @@ -1,23 +1,3 @@ -esphome: - on_boot: - then: - - light.toggle: test_binary_light - - light.turn_off: test_rgb_light - - light.turn_on: - id: test_rgb_light - brightness: 100% - red: 100% - green: 100% - blue: 1.0 - - light.control: - id: test_monochromatic_light - state: on - - light.dim_relative: - id: test_monochromatic_light - relative_brightness: 5% - brightness_limits: - max_brightness: 90% - output: - platform: gpio id: test_binary @@ -38,97 +18,4 @@ output: id: test_ledc_5 pin: 5 -light: - - platform: binary - id: test_binary_light - name: Binary Light - output: test_binary - effects: - - strobe: - on_state: - - logger.log: Binary light state changed - - platform: monochromatic - id: test_monochromatic_light - name: Monochromatic Light - output: test_ledc_1 - gamma_correct: 2.8 - default_transition_length: 2s - effects: - - strobe: - - flicker: - - flicker: - name: My Flicker - alpha: 98% - intensity: 1.5% - - lambda: - name: My Custom Effect - update_interval: 1s - lambda: |- - static int state = 0; - state += 1; - if (state == 4) - state = 0; - - pulse: - transition_length: 10s - update_interval: 20s - min_brightness: 10% - max_brightness: 90% - - pulse: - name: pulse2 - transition_length: - on_length: 10s - off_length: 5s - update_interval: 15s - min_brightness: 10% - max_brightness: 90% - - platform: rgb - id: test_rgb_light - name: RGB Light - red: test_ledc_1 - green: test_ledc_2 - blue: test_ledc_3 - - platform: rgbw - id: test_rgbw_light - name: RGBW Light - red: test_ledc_1 - green: test_ledc_2 - blue: test_ledc_3 - white: test_ledc_4 - color_interlock: true - - platform: rgbww - id: test_rgbww_light - name: RGBWW Light - red: test_ledc_1 - green: test_ledc_2 - blue: test_ledc_3 - cold_white: test_ledc_4 - warm_white: test_ledc_5 - cold_white_color_temperature: 153 mireds - warm_white_color_temperature: 500 mireds - color_interlock: true - - platform: rgbct - id: test_rgbct_light - name: RGBCT Light - red: test_ledc_1 - green: test_ledc_2 - blue: test_ledc_3 - color_temperature: test_ledc_4 - white_brightness: test_ledc_5 - cold_white_color_temperature: 153 mireds - warm_white_color_temperature: 500 mireds - color_interlock: true - - platform: cwww - id: test_cwww_light - name: CWWW Light - cold_white: test_ledc_1 - warm_white: test_ledc_2 - cold_white_color_temperature: 153 mireds - warm_white_color_temperature: 500 mireds - constant_brightness: true - - platform: color_temperature - id: test_color_temperature_light - name: CT Light - color_temperature: test_ledc_1 - brightness: test_ledc_2 - cold_white_color_temperature: 153 mireds - warm_white_color_temperature: 500 mireds +<<: !include common.yaml diff --git a/tests/components/light/test.esp32-c3-idf.yaml b/tests/components/light/test.esp32-c3-idf.yaml index 79171805a6..317d5748a3 100644 --- a/tests/components/light/test.esp32-c3-idf.yaml +++ b/tests/components/light/test.esp32-c3-idf.yaml @@ -1,23 +1,3 @@ -esphome: - on_boot: - then: - - light.toggle: test_binary_light - - light.turn_off: test_rgb_light - - light.turn_on: - id: test_rgb_light - brightness: 100% - red: 100% - green: 100% - blue: 1.0 - - light.control: - id: test_monochromatic_light - state: on - - light.dim_relative: - id: test_monochromatic_light - relative_brightness: 5% - brightness_limits: - max_brightness: 90% - output: - platform: gpio id: test_binary @@ -38,97 +18,4 @@ output: id: test_ledc_5 pin: 5 -light: - - platform: binary - id: test_binary_light - name: Binary Light - output: test_binary - effects: - - strobe: - on_state: - - logger.log: Binary light state changed - - platform: monochromatic - id: test_monochromatic_light - name: Monochromatic Light - output: test_ledc_1 - gamma_correct: 2.8 - default_transition_length: 2s - effects: - - strobe: - - flicker: - - flicker: - name: My Flicker - alpha: 98% - intensity: 1.5% - - lambda: - name: My Custom Effect - update_interval: 1s - lambda: |- - static int state = 0; - state += 1; - if (state == 4) - state = 0; - - pulse: - transition_length: 10s - update_interval: 20s - min_brightness: 10% - max_brightness: 90% - - pulse: - name: pulse2 - transition_length: - on_length: 10s - off_length: 5s - update_interval: 15s - min_brightness: 10% - max_brightness: 90% - - platform: rgb - id: test_rgb_light - name: RGB Light - red: test_ledc_1 - green: test_ledc_2 - blue: test_ledc_3 - - platform: rgbw - id: test_rgbw_light - name: RGBW Light - red: test_ledc_1 - green: test_ledc_2 - blue: test_ledc_3 - white: test_ledc_4 - color_interlock: true - - platform: rgbww - id: test_rgbww_light - name: RGBWW Light - red: test_ledc_1 - green: test_ledc_2 - blue: test_ledc_3 - cold_white: test_ledc_4 - warm_white: test_ledc_5 - cold_white_color_temperature: 153 mireds - warm_white_color_temperature: 500 mireds - color_interlock: true - - platform: rgbct - id: test_rgbct_light - name: RGBCT Light - red: test_ledc_1 - green: test_ledc_2 - blue: test_ledc_3 - color_temperature: test_ledc_4 - white_brightness: test_ledc_5 - cold_white_color_temperature: 153 mireds - warm_white_color_temperature: 500 mireds - color_interlock: true - - platform: cwww - id: test_cwww_light - name: CWWW Light - cold_white: test_ledc_1 - warm_white: test_ledc_2 - cold_white_color_temperature: 153 mireds - warm_white_color_temperature: 500 mireds - constant_brightness: true - - platform: color_temperature - id: test_color_temperature_light - name: CT Light - color_temperature: test_ledc_1 - brightness: test_ledc_2 - cold_white_color_temperature: 153 mireds - warm_white_color_temperature: 500 mireds +<<: !include common.yaml diff --git a/tests/components/light/test.esp32-idf.yaml b/tests/components/light/test.esp32-idf.yaml index 1d0b4cd8f0..925197182c 100644 --- a/tests/components/light/test.esp32-idf.yaml +++ b/tests/components/light/test.esp32-idf.yaml @@ -1,23 +1,3 @@ -esphome: - on_boot: - then: - - light.toggle: test_binary_light - - light.turn_off: test_rgb_light - - light.turn_on: - id: test_rgb_light - brightness: 100% - red: 100% - green: 100% - blue: 1.0 - - light.control: - id: test_monochromatic_light - state: on - - light.dim_relative: - id: test_monochromatic_light - relative_brightness: 5% - brightness_limits: - max_brightness: 90% - output: - platform: gpio id: test_binary @@ -38,97 +18,4 @@ output: id: test_ledc_5 pin: 17 -light: - - platform: binary - id: test_binary_light - name: Binary Light - output: test_binary - effects: - - strobe: - on_state: - - logger.log: Binary light state changed - - platform: monochromatic - id: test_monochromatic_light - name: Monochromatic Light - output: test_ledc_1 - gamma_correct: 2.8 - default_transition_length: 2s - effects: - - strobe: - - flicker: - - flicker: - name: My Flicker - alpha: 98% - intensity: 1.5% - - lambda: - name: My Custom Effect - update_interval: 1s - lambda: |- - static int state = 0; - state += 1; - if (state == 4) - state = 0; - - pulse: - transition_length: 10s - update_interval: 20s - min_brightness: 10% - max_brightness: 90% - - pulse: - name: pulse2 - transition_length: - on_length: 10s - off_length: 5s - update_interval: 15s - min_brightness: 10% - max_brightness: 90% - - platform: rgb - id: test_rgb_light - name: RGB Light - red: test_ledc_1 - green: test_ledc_2 - blue: test_ledc_3 - - platform: rgbw - id: test_rgbw_light - name: RGBW Light - red: test_ledc_1 - green: test_ledc_2 - blue: test_ledc_3 - white: test_ledc_4 - color_interlock: true - - platform: rgbww - id: test_rgbww_light - name: RGBWW Light - red: test_ledc_1 - green: test_ledc_2 - blue: test_ledc_3 - cold_white: test_ledc_4 - warm_white: test_ledc_5 - cold_white_color_temperature: 153 mireds - warm_white_color_temperature: 500 mireds - color_interlock: true - - platform: rgbct - id: test_rgbct_light - name: RGBCT Light - red: test_ledc_1 - green: test_ledc_2 - blue: test_ledc_3 - color_temperature: test_ledc_4 - white_brightness: test_ledc_5 - cold_white_color_temperature: 153 mireds - warm_white_color_temperature: 500 mireds - color_interlock: true - - platform: cwww - id: test_cwww_light - name: CWWW Light - cold_white: test_ledc_1 - warm_white: test_ledc_2 - cold_white_color_temperature: 153 mireds - warm_white_color_temperature: 500 mireds - constant_brightness: true - - platform: color_temperature - id: test_color_temperature_light - name: CT Light - color_temperature: test_ledc_1 - brightness: test_ledc_2 - cold_white_color_temperature: 153 mireds - warm_white_color_temperature: 500 mireds +<<: !include common.yaml diff --git a/tests/components/light/test.esp8266-ard.yaml b/tests/components/light/test.esp8266-ard.yaml index 555e1a1b67..518011e925 100644 --- a/tests/components/light/test.esp8266-ard.yaml +++ b/tests/components/light/test.esp8266-ard.yaml @@ -1,23 +1,3 @@ -esphome: - on_boot: - then: - - light.toggle: test_binary_light - - light.turn_off: test_rgb_light - - light.turn_on: - id: test_rgb_light - brightness: 100% - red: 100% - green: 100% - blue: 1.0 - - light.control: - id: test_monochromatic_light - state: on - - light.dim_relative: - id: test_monochromatic_light - relative_brightness: 5% - brightness_limits: - max_brightness: 90% - output: - platform: gpio id: test_binary @@ -38,97 +18,4 @@ output: id: test_ledc_5 pin: 16 -light: - - platform: binary - id: test_binary_light - name: Binary Light - output: test_binary - effects: - - strobe: - on_state: - - logger.log: Binary light state changed - - platform: monochromatic - id: test_monochromatic_light - name: Monochromatic Light - output: test_ledc_1 - gamma_correct: 2.8 - default_transition_length: 2s - effects: - - strobe: - - flicker: - - flicker: - name: My Flicker - alpha: 98% - intensity: 1.5% - - lambda: - name: My Custom Effect - update_interval: 1s - lambda: |- - static int state = 0; - state += 1; - if (state == 4) - state = 0; - - pulse: - transition_length: 10s - update_interval: 20s - min_brightness: 10% - max_brightness: 90% - - pulse: - name: pulse2 - transition_length: - on_length: 10s - off_length: 5s - update_interval: 15s - min_brightness: 10% - max_brightness: 90% - - platform: rgb - id: test_rgb_light - name: RGB Light - red: test_ledc_1 - green: test_ledc_2 - blue: test_ledc_3 - - platform: rgbw - id: test_rgbw_light - name: RGBW Light - red: test_ledc_1 - green: test_ledc_2 - blue: test_ledc_3 - white: test_ledc_4 - color_interlock: true - - platform: rgbww - id: test_rgbww_light - name: RGBWW Light - red: test_ledc_1 - green: test_ledc_2 - blue: test_ledc_3 - cold_white: test_ledc_4 - warm_white: test_ledc_5 - cold_white_color_temperature: 153 mireds - warm_white_color_temperature: 500 mireds - color_interlock: true - - platform: rgbct - id: test_rgbct_light - name: RGBCT Light - red: test_ledc_1 - green: test_ledc_2 - blue: test_ledc_3 - color_temperature: test_ledc_4 - white_brightness: test_ledc_5 - cold_white_color_temperature: 153 mireds - warm_white_color_temperature: 500 mireds - color_interlock: true - - platform: cwww - id: test_cwww_light - name: CWWW Light - cold_white: test_ledc_1 - warm_white: test_ledc_2 - cold_white_color_temperature: 153 mireds - warm_white_color_temperature: 500 mireds - constant_brightness: true - - platform: color_temperature - id: test_color_temperature_light - name: CT Light - color_temperature: test_ledc_1 - brightness: test_ledc_2 - cold_white_color_temperature: 153 mireds - warm_white_color_temperature: 500 mireds +<<: !include common.yaml diff --git a/tests/components/light/test.rp2040-ard.yaml b/tests/components/light/test.rp2040-ard.yaml index a509bc85c9..a5a37fd559 100644 --- a/tests/components/light/test.rp2040-ard.yaml +++ b/tests/components/light/test.rp2040-ard.yaml @@ -1,23 +1,3 @@ -esphome: - on_boot: - then: - - light.toggle: test_binary_light - - light.turn_off: test_rgb_light - - light.turn_on: - id: test_rgb_light - brightness: 100% - red: 100% - green: 100% - blue: 1.0 - - light.control: - id: test_monochromatic_light - state: on - - light.dim_relative: - id: test_monochromatic_light - relative_brightness: 5% - brightness_limits: - max_brightness: 90% - output: - platform: gpio id: test_binary @@ -38,97 +18,4 @@ output: id: test_ledc_5 pin: 5 -light: - - platform: binary - id: test_binary_light - name: Binary Light - output: test_binary - effects: - - strobe: - on_state: - - logger.log: Binary light state changed - - platform: monochromatic - id: test_monochromatic_light - name: Monochromatic Light - output: test_ledc_1 - gamma_correct: 2.8 - default_transition_length: 2s - effects: - - strobe: - - flicker: - - flicker: - name: My Flicker - alpha: 98% - intensity: 1.5% - - lambda: - name: My Custom Effect - update_interval: 1s - lambda: |- - static int state = 0; - state += 1; - if (state == 4) - state = 0; - - pulse: - transition_length: 10s - update_interval: 20s - min_brightness: 10% - max_brightness: 90% - - pulse: - name: pulse2 - transition_length: - on_length: 10s - off_length: 5s - update_interval: 15s - min_brightness: 10% - max_brightness: 90% - - platform: rgb - id: test_rgb_light - name: RGB Light - red: test_ledc_1 - green: test_ledc_2 - blue: test_ledc_3 - - platform: rgbw - id: test_rgbw_light - name: RGBW Light - red: test_ledc_1 - green: test_ledc_2 - blue: test_ledc_3 - white: test_ledc_4 - color_interlock: true - - platform: rgbww - id: test_rgbww_light - name: RGBWW Light - red: test_ledc_1 - green: test_ledc_2 - blue: test_ledc_3 - cold_white: test_ledc_4 - warm_white: test_ledc_5 - cold_white_color_temperature: 153 mireds - warm_white_color_temperature: 500 mireds - color_interlock: true - - platform: rgbct - id: test_rgbct_light - name: RGBCT Light - red: test_ledc_1 - green: test_ledc_2 - blue: test_ledc_3 - color_temperature: test_ledc_4 - white_brightness: test_ledc_5 - cold_white_color_temperature: 153 mireds - warm_white_color_temperature: 500 mireds - color_interlock: true - - platform: cwww - id: test_cwww_light - name: CWWW Light - cold_white: test_ledc_1 - warm_white: test_ledc_2 - cold_white_color_temperature: 153 mireds - warm_white_color_temperature: 500 mireds - constant_brightness: true - - platform: color_temperature - id: test_color_temperature_light - name: CT Light - color_temperature: test_ledc_1 - brightness: test_ledc_2 - cold_white_color_temperature: 153 mireds - warm_white_color_temperature: 500 mireds +<<: !include common.yaml diff --git a/tests/components/lvgl/lvgl-package.yaml b/tests/components/lvgl/lvgl-package.yaml index 1770c1bfbc..6aea606ac4 100644 --- a/tests/components/lvgl/lvgl-package.yaml +++ b/tests/components/lvgl/lvgl-package.yaml @@ -12,6 +12,11 @@ substitutions: arrow_down: "\U000F004B" lvgl: + resume_on_input: true + on_pause: + logger.log: LVGL is Paused + on_resume: + logger.log: LVGL has resumed log_level: TRACE bg_color: light_blue disp_bg_color: color_id diff --git a/tests/components/lvgl/test.esp32-ard.yaml b/tests/components/lvgl/test.esp32-ard.yaml index 51593e7967..80d5ce503f 100644 --- a/tests/components/lvgl/test.esp32-ard.yaml +++ b/tests/components/lvgl/test.esp32-ard.yaml @@ -44,6 +44,7 @@ binary_sensor: number: GPIO39 inverted: true lvgl: + draw_rounding: 8 encoders: group: switches initial_focus: button_button diff --git a/tests/components/max17043/common.yaml b/tests/components/max17043/common.yaml new file mode 100644 index 0000000000..c2f324212e --- /dev/null +++ b/tests/components/max17043/common.yaml @@ -0,0 +1,19 @@ +esphome: + on_boot: + then: + - max17043.sleep_mode: max17043_id + +i2c: + - id: i2c_id + scl: ${scl_pin} + sda: ${sda_pin} + +sensor: + - platform: max17043 + id: max17043_id + i2c_id: i2c_id + battery_voltage: + name: "Battery Voltage" + battery_level: + name: Battery + update_interval: 10s diff --git a/tests/components/max17043/test.esp32-ard.yaml b/tests/components/max17043/test.esp32-ard.yaml new file mode 100644 index 0000000000..c84e0a5c2e --- /dev/null +++ b/tests/components/max17043/test.esp32-ard.yaml @@ -0,0 +1,6 @@ +substitutions: + sda_pin: GPIO21 + scl_pin: GPIO22 + +<<: !include common.yaml + diff --git a/tests/components/max17043/test.esp32-c3-ard.yaml b/tests/components/max17043/test.esp32-c3-ard.yaml new file mode 100644 index 0000000000..9a1477d4b9 --- /dev/null +++ b/tests/components/max17043/test.esp32-c3-ard.yaml @@ -0,0 +1,5 @@ +substitutions: + sda_pin: GPIO8 + scl_pin: GPIO10 + +<<: !include common.yaml diff --git a/tests/components/max17043/test.esp32-c3-idf.yaml b/tests/components/max17043/test.esp32-c3-idf.yaml new file mode 100644 index 0000000000..9a1477d4b9 --- /dev/null +++ b/tests/components/max17043/test.esp32-c3-idf.yaml @@ -0,0 +1,5 @@ +substitutions: + sda_pin: GPIO8 + scl_pin: GPIO10 + +<<: !include common.yaml diff --git a/tests/components/max17043/test.esp32-idf.yaml b/tests/components/max17043/test.esp32-idf.yaml new file mode 100644 index 0000000000..c6615f51cd --- /dev/null +++ b/tests/components/max17043/test.esp32-idf.yaml @@ -0,0 +1,5 @@ +substitutions: + sda_pin: GPIO21 + scl_pin: GPIO22 + +<<: !include common.yaml diff --git a/tests/components/max17043/test.esp8266-ard.yaml b/tests/components/max17043/test.esp8266-ard.yaml new file mode 100644 index 0000000000..a87353b78b --- /dev/null +++ b/tests/components/max17043/test.esp8266-ard.yaml @@ -0,0 +1,5 @@ +substitutions: + sda_pin: GPIO4 + scl_pin: GPIO5 + +<<: !include common.yaml diff --git a/tests/components/max17043/test.rp2040-ard.yaml b/tests/components/max17043/test.rp2040-ard.yaml new file mode 100644 index 0000000000..c6615f51cd --- /dev/null +++ b/tests/components/max17043/test.rp2040-ard.yaml @@ -0,0 +1,5 @@ +substitutions: + sda_pin: GPIO21 + scl_pin: GPIO22 + +<<: !include common.yaml diff --git a/tests/components/qspi_amoled/common.yaml b/tests/components/qspi_dbi/common.yaml similarity index 73% rename from tests/components/qspi_amoled/common.yaml rename to tests/components/qspi_dbi/common.yaml index 01d1a63bcb..655af304af 100644 --- a/tests/components/qspi_amoled/common.yaml +++ b/tests/components/qspi_dbi/common.yaml @@ -5,7 +5,7 @@ spi: data_pins: [14, 10, 16, 12] display: - - platform: qspi_amoled + - platform: qspi_dbi model: RM690B0 data_rate: 80MHz spi_mode: mode0 @@ -20,9 +20,10 @@ display: reset_pin: 13 enable_pin: 9 - - platform: qspi_amoled - model: RM67162 + - platform: qspi_dbi + model: CUSTOM id: main_lcd + draw_from_origin: true dimensions: height: 240 width: 536 @@ -34,3 +35,10 @@ display: cs_pin: 6 reset_pin: 17 enable_pin: 38 + init_sequence: + - [0x3A, 0x66] + - [0x11] + - delay 120ms + - [0x29] + - delay 20ms + diff --git a/tests/components/qspi_amoled/test.esp32-s3-idf.yaml b/tests/components/qspi_dbi/test.esp32-s3-idf.yaml similarity index 100% rename from tests/components/qspi_amoled/test.esp32-s3-idf.yaml rename to tests/components/qspi_dbi/test.esp32-s3-idf.yaml diff --git a/tests/components/tc74/test.esp32-ard.yaml b/tests/components/tc74/test.esp32-ard.yaml new file mode 100644 index 0000000000..ef9b40e184 --- /dev/null +++ b/tests/components/tc74/test.esp32-ard.yaml @@ -0,0 +1,8 @@ +i2c: + - id: i2c_tc74 + scl: 16 + sda: 17 + +sensor: + - platform: tc74 + name: TC74 Temperature diff --git a/tests/components/tc74/test.esp32-c3-ard.yaml b/tests/components/tc74/test.esp32-c3-ard.yaml new file mode 100644 index 0000000000..e1a373fbf4 --- /dev/null +++ b/tests/components/tc74/test.esp32-c3-ard.yaml @@ -0,0 +1,8 @@ +i2c: + - id: i2c_tc74 + scl: 5 + sda: 4 + +sensor: + - platform: tc74 + name: TC74 Temperature diff --git a/tests/components/tc74/test.esp32-c3-idf.yaml b/tests/components/tc74/test.esp32-c3-idf.yaml new file mode 100644 index 0000000000..e1a373fbf4 --- /dev/null +++ b/tests/components/tc74/test.esp32-c3-idf.yaml @@ -0,0 +1,8 @@ +i2c: + - id: i2c_tc74 + scl: 5 + sda: 4 + +sensor: + - platform: tc74 + name: TC74 Temperature diff --git a/tests/components/tc74/test.esp32-idf.yaml b/tests/components/tc74/test.esp32-idf.yaml new file mode 100644 index 0000000000..ef9b40e184 --- /dev/null +++ b/tests/components/tc74/test.esp32-idf.yaml @@ -0,0 +1,8 @@ +i2c: + - id: i2c_tc74 + scl: 16 + sda: 17 + +sensor: + - platform: tc74 + name: TC74 Temperature diff --git a/tests/components/tc74/test.esp8266-ard.yaml b/tests/components/tc74/test.esp8266-ard.yaml new file mode 100644 index 0000000000..e1a373fbf4 --- /dev/null +++ b/tests/components/tc74/test.esp8266-ard.yaml @@ -0,0 +1,8 @@ +i2c: + - id: i2c_tc74 + scl: 5 + sda: 4 + +sensor: + - platform: tc74 + name: TC74 Temperature diff --git a/tests/components/tc74/test.rp2040-ard.yaml b/tests/components/tc74/test.rp2040-ard.yaml new file mode 100644 index 0000000000..e1a373fbf4 --- /dev/null +++ b/tests/components/tc74/test.rp2040-ard.yaml @@ -0,0 +1,8 @@ +i2c: + - id: i2c_tc74 + scl: 5 + sda: 4 + +sensor: + - platform: tc74 + name: TC74 Temperature