Add some components to the new testing framework (L) (#6195)

tests/components/lcd_gpio/test.esp32-c3-idf.yaml

@@ -0,0 +1,13 @@
+display:
+  - platform: lcd_gpio
+    id: my_lcd_gpio
+    dimensions: 18x4
+    data_pins:
+      - number: 1
+      - number: 2
+      - number: 3
+      - number: 4
+    enable_pin: 5
+    rs_pin: 6
+    lambda: |-
+      it.print("Hello World!");

tests/components/lcd_gpio/test.esp32-c3.yaml

@@ -0,0 +1,13 @@
+display:
+  - platform: lcd_gpio
+    id: my_lcd_gpio
+    dimensions: 18x4
+    data_pins:
+      - number: 1
+      - number: 2
+      - number: 3
+      - number: 4
+    enable_pin: 5
+    rs_pin: 6
+    lambda: |-
+      it.print("Hello World!");

tests/components/lcd_gpio/test.esp32-idf.yaml

@@ -0,0 +1,13 @@
+display:
+  - platform: lcd_gpio
+    id: my_lcd_gpio
+    dimensions: 18x4
+    data_pins:
+      - number: 12
+      - number: 13
+      - number: 14
+      - number: 15
+    enable_pin: 16
+    rs_pin: 5
+    lambda: |-
+      it.print("Hello World!");

tests/components/lcd_gpio/test.esp32.yaml

@@ -0,0 +1,13 @@
+display:
+  - platform: lcd_gpio
+    id: my_lcd_gpio
+    dimensions: 18x4
+    data_pins:
+      - number: 12
+      - number: 13
+      - number: 14
+      - number: 15
+    enable_pin: 16
+    rs_pin: 5
+    lambda: |-
+      it.print("Hello World!");

tests/components/lcd_gpio/test.esp8266.yaml

@@ -0,0 +1,13 @@
+display:
+  - platform: lcd_gpio
+    id: my_lcd_gpio
+    dimensions: 18x4
+    data_pins:
+      - number: 12
+      - number: 13
+      - number: 14
+      - number: 15
+    enable_pin: 16
+    rs_pin: 5
+    lambda: |-
+      it.print("Hello World!");

tests/components/lcd_gpio/test.rp2040.yaml

@@ -0,0 +1,13 @@
+display:
+  - platform: lcd_gpio
+    id: my_lcd_gpio
+    dimensions: 18x4
+    data_pins:
+      - number: 1
+      - number: 2
+      - number: 3
+      - number: 4
+    enable_pin: 5
+    rs_pin: 6
+    lambda: |-
+      it.print("Hello World!");

tests/components/lcd_menu/test.esp32-c3-idf.yaml

@@ -0,0 +1,118 @@
+number:
+  - platform: template
+    id: test_number
+    min_value: 0
+    step: 1
+    max_value: 10
+    optimistic: true
+
+select:
+  - platform: template
+    id: test_select
+    options:
+      - one
+      - two
+    optimistic: true
+
+switch:
+  - platform: template
+    name: Template Switch
+    id: my_switch
+    optimistic: true
+
+display:
+  - platform: lcd_gpio
+    id: my_lcd_gpio
+    dimensions: 18x4
+    data_pins:
+      - number: 1
+      - number: 2
+      - number: 3
+      - number: 4
+    enable_pin: 5
+    rs_pin: 6
+    lambda: |-
+      it.print("Hello World!");
+
+lcd_menu:
+  id: test_lcd_menu
+  display_id: my_lcd_gpio
+  mark_back: 0x5e
+  mark_selected: 0x3e
+  mark_editing: 0x2a
+  mark_submenu: 0x7e
+  active: false
+  mode: rotary
+  on_enter:
+    then:
+      lambda: 'ESP_LOGI("lcd_menu", "root enter");'
+  on_leave:
+    then:
+      lambda: 'ESP_LOGI("lcd_menu", "root leave");'
+  items:
+    - type: back
+      text: Back
+    - type: label
+    - type: menu
+      text: Submenu 1
+      items:
+        - type: back
+          text: Back
+        - type: menu
+          text: Submenu 21
+          items:
+            - type: back
+              text: Back
+            - type: command
+              text: Show Main
+              on_value:
+                then:
+                  - display_menu.show_main: test_lcd_menu
+    - type: select
+      text: Enum Item
+      immediate_edit: true
+      select: test_select
+      on_enter:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "select enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+      on_leave:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "select leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+      on_value:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "select value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+    - type: number
+      text: Number
+      number: test_number
+      on_enter:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "number enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+      on_leave:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "number leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+      on_value:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "number value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+    - type: command
+      text: Hide
+      on_value:
+        then:
+          - display_menu.hide: test_lcd_menu
+    - type: switch
+      text: Switch
+      switch: my_switch
+      on_text: Bright
+      off_text: Dark
+      immediate_edit: false
+      on_value:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "switch value: %s", it->get_value_text().c_str());'
+    - type: custom
+      text: !lambda 'return "Custom";'
+      value_lambda: 'return "Val";'
+      on_next:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "custom next: %s", it->get_text().c_str());'
+      on_prev:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "custom prev: %s", it->get_text().c_str());'

tests/components/lcd_menu/test.esp32-c3.yaml

@@ -0,0 +1,118 @@
+number:
+  - platform: template
+    id: test_number
+    min_value: 0
+    step: 1
+    max_value: 10
+    optimistic: true
+
+select:
+  - platform: template
+    id: test_select
+    options:
+      - one
+      - two
+    optimistic: true
+
+switch:
+  - platform: template
+    name: Template Switch
+    id: my_switch
+    optimistic: true
+
+display:
+  - platform: lcd_gpio
+    id: my_lcd_gpio
+    dimensions: 18x4
+    data_pins:
+      - number: 1
+      - number: 2
+      - number: 3
+      - number: 4
+    enable_pin: 5
+    rs_pin: 6
+    lambda: |-
+      it.print("Hello World!");
+
+lcd_menu:
+  id: test_lcd_menu
+  display_id: my_lcd_gpio
+  mark_back: 0x5e
+  mark_selected: 0x3e
+  mark_editing: 0x2a
+  mark_submenu: 0x7e
+  active: false
+  mode: rotary
+  on_enter:
+    then:
+      lambda: 'ESP_LOGI("lcd_menu", "root enter");'
+  on_leave:
+    then:
+      lambda: 'ESP_LOGI("lcd_menu", "root leave");'
+  items:
+    - type: back
+      text: Back
+    - type: label
+    - type: menu
+      text: Submenu 1
+      items:
+        - type: back
+          text: Back
+        - type: menu
+          text: Submenu 21
+          items:
+            - type: back
+              text: Back
+            - type: command
+              text: Show Main
+              on_value:
+                then:
+                  - display_menu.show_main: test_lcd_menu
+    - type: select
+      text: Enum Item
+      immediate_edit: true
+      select: test_select
+      on_enter:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "select enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+      on_leave:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "select leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+      on_value:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "select value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+    - type: number
+      text: Number
+      number: test_number
+      on_enter:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "number enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+      on_leave:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "number leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+      on_value:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "number value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+    - type: command
+      text: Hide
+      on_value:
+        then:
+          - display_menu.hide: test_lcd_menu
+    - type: switch
+      text: Switch
+      switch: my_switch
+      on_text: Bright
+      off_text: Dark
+      immediate_edit: false
+      on_value:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "switch value: %s", it->get_value_text().c_str());'
+    - type: custom
+      text: !lambda 'return "Custom";'
+      value_lambda: 'return "Val";'
+      on_next:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "custom next: %s", it->get_text().c_str());'
+      on_prev:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "custom prev: %s", it->get_text().c_str());'

tests/components/lcd_menu/test.esp32-idf.yaml

@@ -0,0 +1,118 @@
+number:
+  - platform: template
+    id: test_number
+    min_value: 0
+    step: 1
+    max_value: 10
+    optimistic: true
+
+select:
+  - platform: template
+    id: test_select
+    options:
+      - one
+      - two
+    optimistic: true
+
+switch:
+  - platform: template
+    name: Template Switch
+    id: my_switch
+    optimistic: true
+
+display:
+  - platform: lcd_gpio
+    id: my_lcd_gpio
+    dimensions: 18x4
+    data_pins:
+      - number: 12
+      - number: 13
+      - number: 14
+      - number: 15
+    enable_pin: 16
+    rs_pin: 5
+    lambda: |-
+      it.print("Hello World!");
+
+lcd_menu:
+  id: test_lcd_menu
+  display_id: my_lcd_gpio
+  mark_back: 0x5e
+  mark_selected: 0x3e
+  mark_editing: 0x2a
+  mark_submenu: 0x7e
+  active: false
+  mode: rotary
+  on_enter:
+    then:
+      lambda: 'ESP_LOGI("lcd_menu", "root enter");'
+  on_leave:
+    then:
+      lambda: 'ESP_LOGI("lcd_menu", "root leave");'
+  items:
+    - type: back
+      text: Back
+    - type: label
+    - type: menu
+      text: Submenu 1
+      items:
+        - type: back
+          text: Back
+        - type: menu
+          text: Submenu 21
+          items:
+            - type: back
+              text: Back
+            - type: command
+              text: Show Main
+              on_value:
+                then:
+                  - display_menu.show_main: test_lcd_menu
+    - type: select
+      text: Enum Item
+      immediate_edit: true
+      select: test_select
+      on_enter:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "select enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+      on_leave:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "select leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+      on_value:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "select value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+    - type: number
+      text: Number
+      number: test_number
+      on_enter:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "number enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+      on_leave:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "number leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+      on_value:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "number value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+    - type: command
+      text: Hide
+      on_value:
+        then:
+          - display_menu.hide: test_lcd_menu
+    - type: switch
+      text: Switch
+      switch: my_switch
+      on_text: Bright
+      off_text: Dark
+      immediate_edit: false
+      on_value:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "switch value: %s", it->get_value_text().c_str());'
+    - type: custom
+      text: !lambda 'return "Custom";'
+      value_lambda: 'return "Val";'
+      on_next:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "custom next: %s", it->get_text().c_str());'
+      on_prev:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "custom prev: %s", it->get_text().c_str());'

tests/components/lcd_menu/test.esp32.yaml

@@ -0,0 +1,118 @@
+number:
+  - platform: template
+    id: test_number
+    min_value: 0
+    step: 1
+    max_value: 10
+    optimistic: true
+
+select:
+  - platform: template
+    id: test_select
+    options:
+      - one
+      - two
+    optimistic: true
+
+switch:
+  - platform: template
+    name: Template Switch
+    id: my_switch
+    optimistic: true
+
+display:
+  - platform: lcd_gpio
+    id: my_lcd_gpio
+    dimensions: 18x4
+    data_pins:
+      - number: 12
+      - number: 13
+      - number: 14
+      - number: 15
+    enable_pin: 16
+    rs_pin: 5
+    lambda: |-
+      it.print("Hello World!");
+
+lcd_menu:
+  id: test_lcd_menu
+  display_id: my_lcd_gpio
+  mark_back: 0x5e
+  mark_selected: 0x3e
+  mark_editing: 0x2a
+  mark_submenu: 0x7e
+  active: false
+  mode: rotary
+  on_enter:
+    then:
+      lambda: 'ESP_LOGI("lcd_menu", "root enter");'
+  on_leave:
+    then:
+      lambda: 'ESP_LOGI("lcd_menu", "root leave");'
+  items:
+    - type: back
+      text: Back
+    - type: label
+    - type: menu
+      text: Submenu 1
+      items:
+        - type: back
+          text: Back
+        - type: menu
+          text: Submenu 21
+          items:
+            - type: back
+              text: Back
+            - type: command
+              text: Show Main
+              on_value:
+                then:
+                  - display_menu.show_main: test_lcd_menu
+    - type: select
+      text: Enum Item
+      immediate_edit: true
+      select: test_select
+      on_enter:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "select enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+      on_leave:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "select leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+      on_value:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "select value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+    - type: number
+      text: Number
+      number: test_number
+      on_enter:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "number enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+      on_leave:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "number leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+      on_value:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "number value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+    - type: command
+      text: Hide
+      on_value:
+        then:
+          - display_menu.hide: test_lcd_menu
+    - type: switch
+      text: Switch
+      switch: my_switch
+      on_text: Bright
+      off_text: Dark
+      immediate_edit: false
+      on_value:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "switch value: %s", it->get_value_text().c_str());'
+    - type: custom
+      text: !lambda 'return "Custom";'
+      value_lambda: 'return "Val";'
+      on_next:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "custom next: %s", it->get_text().c_str());'
+      on_prev:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "custom prev: %s", it->get_text().c_str());'

tests/components/lcd_menu/test.esp8266.yaml

@@ -0,0 +1,118 @@
+number:
+  - platform: template
+    id: test_number
+    min_value: 0
+    step: 1
+    max_value: 10
+    optimistic: true
+
+select:
+  - platform: template
+    id: test_select
+    options:
+      - one
+      - two
+    optimistic: true
+
+switch:
+  - platform: template
+    name: Template Switch
+    id: my_switch
+    optimistic: true
+
+display:
+  - platform: lcd_gpio
+    id: my_lcd_gpio
+    dimensions: 18x4
+    data_pins:
+      - number: 12
+      - number: 13
+      - number: 14
+      - number: 15
+    enable_pin: 16
+    rs_pin: 5
+    lambda: |-
+      it.print("Hello World!");
+
+lcd_menu:
+  id: test_lcd_menu
+  display_id: my_lcd_gpio
+  mark_back: 0x5e
+  mark_selected: 0x3e
+  mark_editing: 0x2a
+  mark_submenu: 0x7e
+  active: false
+  mode: rotary
+  on_enter:
+    then:
+      lambda: 'ESP_LOGI("lcd_menu", "root enter");'
+  on_leave:
+    then:
+      lambda: 'ESP_LOGI("lcd_menu", "root leave");'
+  items:
+    - type: back
+      text: Back
+    - type: label
+    - type: menu
+      text: Submenu 1
+      items:
+        - type: back
+          text: Back
+        - type: menu
+          text: Submenu 21
+          items:
+            - type: back
+              text: Back
+            - type: command
+              text: Show Main
+              on_value:
+                then:
+                  - display_menu.show_main: test_lcd_menu
+    - type: select
+      text: Enum Item
+      immediate_edit: true
+      select: test_select
+      on_enter:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "select enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+      on_leave:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "select leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+      on_value:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "select value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+    - type: number
+      text: Number
+      number: test_number
+      on_enter:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "number enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+      on_leave:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "number leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+      on_value:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "number value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+    - type: command
+      text: Hide
+      on_value:
+        then:
+          - display_menu.hide: test_lcd_menu
+    - type: switch
+      text: Switch
+      switch: my_switch
+      on_text: Bright
+      off_text: Dark
+      immediate_edit: false
+      on_value:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "switch value: %s", it->get_value_text().c_str());'
+    - type: custom
+      text: !lambda 'return "Custom";'
+      value_lambda: 'return "Val";'
+      on_next:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "custom next: %s", it->get_text().c_str());'
+      on_prev:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "custom prev: %s", it->get_text().c_str());'

tests/components/lcd_menu/test.rp2040.yaml

@@ -0,0 +1,118 @@
+number:
+  - platform: template
+    id: test_number
+    min_value: 0
+    step: 1
+    max_value: 10
+    optimistic: true
+
+select:
+  - platform: template
+    id: test_select
+    options:
+      - one
+      - two
+    optimistic: true
+
+switch:
+  - platform: template
+    name: Template Switch
+    id: my_switch
+    optimistic: true
+
+display:
+  - platform: lcd_gpio
+    id: my_lcd_gpio
+    dimensions: 18x4
+    data_pins:
+      - number: 1
+      - number: 2
+      - number: 3
+      - number: 4
+    enable_pin: 5
+    rs_pin: 6
+    lambda: |-
+      it.print("Hello World!");
+
+lcd_menu:
+  id: test_lcd_menu
+  display_id: my_lcd_gpio
+  mark_back: 0x5e
+  mark_selected: 0x3e
+  mark_editing: 0x2a
+  mark_submenu: 0x7e
+  active: false
+  mode: rotary
+  on_enter:
+    then:
+      lambda: 'ESP_LOGI("lcd_menu", "root enter");'
+  on_leave:
+    then:
+      lambda: 'ESP_LOGI("lcd_menu", "root leave");'
+  items:
+    - type: back
+      text: Back
+    - type: label
+    - type: menu
+      text: Submenu 1
+      items:
+        - type: back
+          text: Back
+        - type: menu
+          text: Submenu 21
+          items:
+            - type: back
+              text: Back
+            - type: command
+              text: Show Main
+              on_value:
+                then:
+                  - display_menu.show_main: test_lcd_menu
+    - type: select
+      text: Enum Item
+      immediate_edit: true
+      select: test_select
+      on_enter:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "select enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+      on_leave:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "select leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+      on_value:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "select value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+    - type: number
+      text: Number
+      number: test_number
+      on_enter:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "number enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+      on_leave:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "number leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+      on_value:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "number value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+    - type: command
+      text: Hide
+      on_value:
+        then:
+          - display_menu.hide: test_lcd_menu
+    - type: switch
+      text: Switch
+      switch: my_switch
+      on_text: Bright
+      off_text: Dark
+      immediate_edit: false
+      on_value:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "switch value: %s", it->get_value_text().c_str());'
+    - type: custom
+      text: !lambda 'return "Custom";'
+      value_lambda: 'return "Val";'
+      on_next:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "custom next: %s", it->get_text().c_str());'
+      on_prev:
+        then:
+          lambda: 'ESP_LOGI("lcd_menu", "custom prev: %s", it->get_text().c_str());'

tests/components/lcd_pcf8574/test.esp32-c3-idf.yaml

@@ -0,0 +1,22 @@
+i2c:
+  - id: i2c_lcd_pcf8574
+    scl: 5
+    sda: 4
+
+display:
+  - platform: lcd_pcf8574
+    dimensions: 18x4
+    address: 0x3F
+    user_characters:
+      - position: 0
+        data:
+          - 0b00000
+          - 0b01010
+          - 0b00000
+          - 0b00100
+          - 0b00100
+          - 0b10001
+          - 0b01110
+          - 0b00000
+    lambda: |-
+      it.print("Hello World!");

tests/components/lcd_pcf8574/test.esp32-c3.yaml

@@ -0,0 +1,22 @@
+i2c:
+  - id: i2c_lcd_pcf8574
+    scl: 5
+    sda: 4
+
+display:
+  - platform: lcd_pcf8574
+    dimensions: 18x4
+    address: 0x3F
+    user_characters:
+      - position: 0
+        data:
+          - 0b00000
+          - 0b01010
+          - 0b00000
+          - 0b00100
+          - 0b00100
+          - 0b10001
+          - 0b01110
+          - 0b00000
+    lambda: |-
+      it.print("Hello World!");

tests/components/lcd_pcf8574/test.esp32-idf.yaml

@@ -0,0 +1,22 @@
+i2c:
+  - id: i2c_lcd_pcf8574
+    scl: 16
+    sda: 17
+
+display:
+  - platform: lcd_pcf8574
+    dimensions: 18x4
+    address: 0x3F
+    user_characters:
+      - position: 0
+        data:
+          - 0b00000
+          - 0b01010
+          - 0b00000
+          - 0b00100
+          - 0b00100
+          - 0b10001
+          - 0b01110
+          - 0b00000
+    lambda: |-
+      it.print("Hello World!");

tests/components/lcd_pcf8574/test.esp32.yaml

@@ -0,0 +1,22 @@
+i2c:
+  - id: i2c_lcd_pcf8574
+    scl: 16
+    sda: 17
+
+display:
+  - platform: lcd_pcf8574
+    dimensions: 18x4
+    address: 0x3F
+    user_characters:
+      - position: 0
+        data:
+          - 0b00000
+          - 0b01010
+          - 0b00000
+          - 0b00100
+          - 0b00100
+          - 0b10001
+          - 0b01110
+          - 0b00000
+    lambda: |-
+      it.print("Hello World!");

tests/components/lcd_pcf8574/test.esp8266.yaml

@@ -0,0 +1,22 @@
+i2c:
+  - id: i2c_lcd_pcf8574
+    scl: 5
+    sda: 4
+
+display:
+  - platform: lcd_pcf8574
+    dimensions: 18x4
+    address: 0x3F
+    user_characters:
+      - position: 0
+        data:
+          - 0b00000
+          - 0b01010
+          - 0b00000
+          - 0b00100
+          - 0b00100
+          - 0b10001
+          - 0b01110
+          - 0b00000
+    lambda: |-
+      it.print("Hello World!");

tests/components/lcd_pcf8574/test.rp2040.yaml

@@ -0,0 +1,22 @@
+i2c:
+  - id: i2c_lcd_pcf8574
+    scl: 5
+    sda: 4
+
+display:
+  - platform: lcd_pcf8574
+    dimensions: 18x4
+    address: 0x3F
+    user_characters:
+      - position: 0
+        data:
+          - 0b00000
+          - 0b01010
+          - 0b00000
+          - 0b00100
+          - 0b00100
+          - 0b10001
+          - 0b01110
+          - 0b00000
+    lambda: |-
+      it.print("Hello World!");

tests/components/ld2410/test.esp32-c3-idf.yaml

@@ -0,0 +1,169 @@
+uart:
+  - id: uart_ld2410
+    tx_pin: 4
+    rx_pin: 5
+    baud_rate: 9600
+
+ld2410:
+  id: my_ld2410
+
+binary_sensor:
+  - platform: ld2410
+    has_target:
+      name: presence
+    has_moving_target:
+      name: movement
+    has_still_target:
+      name: still
+    out_pin_presence_status:
+      name: out pin presence status
+
+button:
+  - platform: ld2410
+    factory_reset:
+      name: factory reset
+    restart:
+      name: restart
+    query_params:
+      name: query params
+
+number:
+  - platform: ld2410
+    light_threshold:
+      name: light threshold
+    timeout:
+      name: timeout
+    max_move_distance_gate:
+      name: max move distance gate
+    max_still_distance_gate:
+      name: max still distance gate
+    g0:
+      move_threshold:
+        name: g0 move threshold
+      still_threshold:
+        name: g0 still threshold
+    g1:
+      move_threshold:
+        name: g1 move threshold
+      still_threshold:
+        name: g1 still threshold
+    g2:
+      move_threshold:
+        name: g2 move threshold
+      still_threshold:
+        name: g2 still threshold
+    g3:
+      move_threshold:
+        name: g3 move threshold
+      still_threshold:
+        name: g3 still threshold
+    g4:
+      move_threshold:
+        name: g4 move threshold
+      still_threshold:
+        name: g4 still threshold
+    g5:
+      move_threshold:
+        name: g5 move threshold
+      still_threshold:
+        name: g5 still threshold
+    g6:
+      move_threshold:
+        name: g6 move threshold
+      still_threshold:
+        name: g6 still threshold
+    g7:
+      move_threshold:
+        name: g7 move threshold
+      still_threshold:
+        name: g7 still threshold
+    g8:
+      move_threshold:
+        name: g8 move threshold
+      still_threshold:
+        name: g8 still threshold
+
+select:
+  - platform: ld2410
+    distance_resolution:
+      name: distance resolution
+    baud_rate:
+      name: baud rate
+    light_function:
+      name: light function
+    out_pin_level:
+      name: out ping level
+
+sensor:
+  - platform: ld2410
+    light:
+      name: light
+    moving_distance:
+      name: Moving distance
+    still_distance:
+      name: Still Distance
+    moving_energy:
+      name: Move Energy
+    still_energy:
+      name: Still Energy
+    detection_distance:
+      name: Distance Detection
+    g0:
+      move_energy:
+        name: g0 move energy
+      still_energy:
+        name: g0 still energy
+    g1:
+      move_energy:
+        name: g1 move energy
+      still_energy:
+        name: g1 still energy
+    g2:
+      move_energy:
+        name: g2 move energy
+      still_energy:
+        name: g2 still energy
+    g3:
+      move_energy:
+        name: g3 move energy
+      still_energy:
+        name: g3 still energy
+    g4:
+      move_energy:
+        name: g4 move energy
+      still_energy:
+        name: g4 still energy
+    g5:
+      move_energy:
+        name: g5 move energy
+      still_energy:
+        name: g5 still energy
+    g6:
+      move_energy:
+        name: g6 move energy
+      still_energy:
+        name: g6 still energy
+    g7:
+      move_energy:
+        name: g7 move energy
+      still_energy:
+        name: g7 still energy
+    g8:
+      move_energy:
+        name: g8 move energy
+      still_energy:
+        name: g8 still energy
+
+switch:
+  - platform: ld2410
+    engineering_mode:
+      name: control ld2410 engineering mode
+    bluetooth:
+      name: control ld2410 bluetooth
+
+text_sensor:
+  - platform: ld2410
+    version:
+      name: presenece sensor version
+    mac_address:
+      name: presenece sensor mac address

tests/components/ld2410/test.esp32-c3.yaml

@@ -0,0 +1,169 @@
+uart:
+  - id: uart_ld2410
+    tx_pin: 4
+    rx_pin: 5
+    baud_rate: 9600
+
+ld2410:
+  id: my_ld2410
+
+binary_sensor:
+  - platform: ld2410
+    has_target:
+      name: presence
+    has_moving_target:
+      name: movement
+    has_still_target:
+      name: still
+    out_pin_presence_status:
+      name: out pin presence status
+
+button:
+  - platform: ld2410
+    factory_reset:
+      name: factory reset
+    restart:
+      name: restart
+    query_params:
+      name: query params
+
+number:
+  - platform: ld2410
+    light_threshold:
+      name: light threshold
+    timeout:
+      name: timeout
+    max_move_distance_gate:
+      name: max move distance gate
+    max_still_distance_gate:
+      name: max still distance gate
+    g0:
+      move_threshold:
+        name: g0 move threshold
+      still_threshold:
+        name: g0 still threshold
+    g1:
+      move_threshold:
+        name: g1 move threshold
+      still_threshold:
+        name: g1 still threshold
+    g2:
+      move_threshold:
+        name: g2 move threshold
+      still_threshold:
+        name: g2 still threshold
+    g3:
+      move_threshold:
+        name: g3 move threshold
+      still_threshold:
+        name: g3 still threshold
+    g4:
+      move_threshold:
+        name: g4 move threshold
+      still_threshold:
+        name: g4 still threshold
+    g5:
+      move_threshold:
+        name: g5 move threshold
+      still_threshold:
+        name: g5 still threshold
+    g6:
+      move_threshold:
+        name: g6 move threshold
+      still_threshold:
+        name: g6 still threshold
+    g7:
+      move_threshold:
+        name: g7 move threshold
+      still_threshold:
+        name: g7 still threshold
+    g8:
+      move_threshold:
+        name: g8 move threshold
+      still_threshold:
+        name: g8 still threshold
+
+select:
+  - platform: ld2410
+    distance_resolution:
+      name: distance resolution
+    baud_rate:
+      name: baud rate
+    light_function:
+      name: light function
+    out_pin_level:
+      name: out ping level
+
+sensor:
+  - platform: ld2410
+    light:
+      name: light
+    moving_distance:
+      name: Moving distance
+    still_distance:
+      name: Still Distance
+    moving_energy:
+      name: Move Energy
+    still_energy:
+      name: Still Energy
+    detection_distance:
+      name: Distance Detection
+    g0:
+      move_energy:
+        name: g0 move energy
+      still_energy:
+        name: g0 still energy
+    g1:
+      move_energy:
+        name: g1 move energy
+      still_energy:
+        name: g1 still energy
+    g2:
+      move_energy:
+        name: g2 move energy
+      still_energy:
+        name: g2 still energy
+    g3:
+      move_energy:
+        name: g3 move energy
+      still_energy:
+        name: g3 still energy
+    g4:
+      move_energy:
+        name: g4 move energy
+      still_energy:
+        name: g4 still energy
+    g5:
+      move_energy:
+        name: g5 move energy
+      still_energy:
+        name: g5 still energy
+    g6:
+      move_energy:
+        name: g6 move energy
+      still_energy:
+        name: g6 still energy
+    g7:
+      move_energy:
+        name: g7 move energy
+      still_energy:
+        name: g7 still energy
+    g8:
+      move_energy:
+        name: g8 move energy
+      still_energy:
+        name: g8 still energy
+
+switch:
+  - platform: ld2410
+    engineering_mode:
+      name: control ld2410 engineering mode
+    bluetooth:
+      name: control ld2410 bluetooth
+
+text_sensor:
+  - platform: ld2410
+    version:
+      name: presenece sensor version
+    mac_address:
+      name: presenece sensor mac address

tests/components/ld2410/test.esp32-idf.yaml

@@ -0,0 +1,169 @@
+uart:
+  - id: uart_ld2410
+    tx_pin: 17
+    rx_pin: 16
+    baud_rate: 9600
+
+ld2410:
+  id: my_ld2410
+
+binary_sensor:
+  - platform: ld2410
+    has_target:
+      name: presence
+    has_moving_target:
+      name: movement
+    has_still_target:
+      name: still
+    out_pin_presence_status:
+      name: out pin presence status
+
+button:
+  - platform: ld2410
+    factory_reset:
+      name: factory reset
+    restart:
+      name: restart
+    query_params:
+      name: query params
+
+number:
+  - platform: ld2410
+    light_threshold:
+      name: light threshold
+    timeout:
+      name: timeout
+    max_move_distance_gate:
+      name: max move distance gate
+    max_still_distance_gate:
+      name: max still distance gate
+    g0:
+      move_threshold:
+        name: g0 move threshold
+      still_threshold:
+        name: g0 still threshold
+    g1:
+      move_threshold:
+        name: g1 move threshold
+      still_threshold:
+        name: g1 still threshold
+    g2:
+      move_threshold:
+        name: g2 move threshold
+      still_threshold:
+        name: g2 still threshold
+    g3:
+      move_threshold:
+        name: g3 move threshold
+      still_threshold:
+        name: g3 still threshold
+    g4:
+      move_threshold:
+        name: g4 move threshold
+      still_threshold:
+        name: g4 still threshold
+    g5:
+      move_threshold:
+        name: g5 move threshold
+      still_threshold:
+        name: g5 still threshold
+    g6:
+      move_threshold:
+        name: g6 move threshold
+      still_threshold:
+        name: g6 still threshold
+    g7:
+      move_threshold:
+        name: g7 move threshold
+      still_threshold:
+        name: g7 still threshold
+    g8:
+      move_threshold:
+        name: g8 move threshold
+      still_threshold:
+        name: g8 still threshold
+
+select:
+  - platform: ld2410
+    distance_resolution:
+      name: distance resolution
+    baud_rate:
+      name: baud rate
+    light_function:
+      name: light function
+    out_pin_level:
+      name: out ping level
+
+sensor:
+  - platform: ld2410
+    light:
+      name: light
+    moving_distance:
+      name: Moving distance
+    still_distance:
+      name: Still Distance
+    moving_energy:
+      name: Move Energy
+    still_energy:
+      name: Still Energy
+    detection_distance:
+      name: Distance Detection
+    g0:
+      move_energy:
+        name: g0 move energy
+      still_energy:
+        name: g0 still energy
+    g1:
+      move_energy:
+        name: g1 move energy
+      still_energy:
+        name: g1 still energy
+    g2:
+      move_energy:
+        name: g2 move energy
+      still_energy:
+        name: g2 still energy
+    g3:
+      move_energy:
+        name: g3 move energy
+      still_energy:
+        name: g3 still energy
+    g4:
+      move_energy:
+        name: g4 move energy
+      still_energy:
+        name: g4 still energy
+    g5:
+      move_energy:
+        name: g5 move energy
+      still_energy:
+        name: g5 still energy
+    g6:
+      move_energy:
+        name: g6 move energy
+      still_energy:
+        name: g6 still energy
+    g7:
+      move_energy:
+        name: g7 move energy
+      still_energy:
+        name: g7 still energy
+    g8:
+      move_energy:
+        name: g8 move energy
+      still_energy:
+        name: g8 still energy
+
+switch:
+  - platform: ld2410
+    engineering_mode:
+      name: control ld2410 engineering mode
+    bluetooth:
+      name: control ld2410 bluetooth
+
+text_sensor:
+  - platform: ld2410
+    version:
+      name: presenece sensor version
+    mac_address:
+      name: presenece sensor mac address

tests/components/ld2410/test.esp32.yaml

@@ -0,0 +1,169 @@
+uart:
+  - id: uart_ld2410
+    tx_pin: 17
+    rx_pin: 16
+    baud_rate: 9600
+
+ld2410:
+  id: my_ld2410
+
+binary_sensor:
+  - platform: ld2410
+    has_target:
+      name: presence
+    has_moving_target:
+      name: movement
+    has_still_target:
+      name: still
+    out_pin_presence_status:
+      name: out pin presence status
+
+button:
+  - platform: ld2410
+    factory_reset:
+      name: factory reset
+    restart:
+      name: restart
+    query_params:
+      name: query params
+
+number:
+  - platform: ld2410
+    light_threshold:
+      name: light threshold
+    timeout:
+      name: timeout
+    max_move_distance_gate:
+      name: max move distance gate
+    max_still_distance_gate:
+      name: max still distance gate
+    g0:
+      move_threshold:
+        name: g0 move threshold
+      still_threshold:
+        name: g0 still threshold
+    g1:
+      move_threshold:
+        name: g1 move threshold
+      still_threshold:
+        name: g1 still threshold
+    g2:
+      move_threshold:
+        name: g2 move threshold
+      still_threshold:
+        name: g2 still threshold
+    g3:
+      move_threshold:
+        name: g3 move threshold
+      still_threshold:
+        name: g3 still threshold
+    g4:
+      move_threshold:
+        name: g4 move threshold
+      still_threshold:
+        name: g4 still threshold
+    g5:
+      move_threshold:
+        name: g5 move threshold
+      still_threshold:
+        name: g5 still threshold
+    g6:
+      move_threshold:
+        name: g6 move threshold
+      still_threshold:
+        name: g6 still threshold
+    g7:
+      move_threshold:
+        name: g7 move threshold
+      still_threshold:
+        name: g7 still threshold
+    g8:
+      move_threshold:
+        name: g8 move threshold
+      still_threshold:
+        name: g8 still threshold
+
+select:
+  - platform: ld2410
+    distance_resolution:
+      name: distance resolution
+    baud_rate:
+      name: baud rate
+    light_function:
+      name: light function
+    out_pin_level:
+      name: out ping level
+
+sensor:
+  - platform: ld2410
+    light:
+      name: light
+    moving_distance:
+      name: Moving distance
+    still_distance:
+      name: Still Distance
+    moving_energy:
+      name: Move Energy
+    still_energy:
+      name: Still Energy
+    detection_distance:
+      name: Distance Detection
+    g0:
+      move_energy:
+        name: g0 move energy
+      still_energy:
+        name: g0 still energy
+    g1:
+      move_energy:
+        name: g1 move energy
+      still_energy:
+        name: g1 still energy
+    g2:
+      move_energy:
+        name: g2 move energy
+      still_energy:
+        name: g2 still energy
+    g3:
+      move_energy:
+        name: g3 move energy
+      still_energy:
+        name: g3 still energy
+    g4:
+      move_energy:
+        name: g4 move energy
+      still_energy:
+        name: g4 still energy
+    g5:
+      move_energy:
+        name: g5 move energy
+      still_energy:
+        name: g5 still energy
+    g6:
+      move_energy:
+        name: g6 move energy
+      still_energy:
+        name: g6 still energy
+    g7:
+      move_energy:
+        name: g7 move energy
+      still_energy:
+        name: g7 still energy
+    g8:
+      move_energy:
+        name: g8 move energy
+      still_energy:
+        name: g8 still energy
+
+switch:
+  - platform: ld2410
+    engineering_mode:
+      name: control ld2410 engineering mode
+    bluetooth:
+      name: control ld2410 bluetooth
+
+text_sensor:
+  - platform: ld2410
+    version:
+      name: presenece sensor version
+    mac_address:
+      name: presenece sensor mac address

tests/components/ld2410/test.esp8266.yaml

@@ -0,0 +1,169 @@
+uart:
+  - id: uart_ld2410
+    tx_pin: 4
+    rx_pin: 5
+    baud_rate: 9600
+
+ld2410:
+  id: my_ld2410
+
+binary_sensor:
+  - platform: ld2410
+    has_target:
+      name: presence
+    has_moving_target:
+      name: movement
+    has_still_target:
+      name: still
+    out_pin_presence_status:
+      name: out pin presence status
+
+button:
+  - platform: ld2410
+    factory_reset:
+      name: factory reset
+    restart:
+      name: restart
+    query_params:
+      name: query params
+
+number:
+  - platform: ld2410
+    light_threshold:
+      name: light threshold
+    timeout:
+      name: timeout
+    max_move_distance_gate:
+      name: max move distance gate
+    max_still_distance_gate:
+      name: max still distance gate
+    g0:
+      move_threshold:
+        name: g0 move threshold
+      still_threshold:
+        name: g0 still threshold
+    g1:
+      move_threshold:
+        name: g1 move threshold
+      still_threshold:
+        name: g1 still threshold
+    g2:
+      move_threshold:
+        name: g2 move threshold
+      still_threshold:
+        name: g2 still threshold
+    g3:
+      move_threshold:
+        name: g3 move threshold
+      still_threshold:
+        name: g3 still threshold
+    g4:
+      move_threshold:
+        name: g4 move threshold
+      still_threshold:
+        name: g4 still threshold
+    g5:
+      move_threshold:
+        name: g5 move threshold
+      still_threshold:
+        name: g5 still threshold
+    g6:
+      move_threshold:
+        name: g6 move threshold
+      still_threshold:
+        name: g6 still threshold
+    g7:
+      move_threshold:
+        name: g7 move threshold
+      still_threshold:
+        name: g7 still threshold
+    g8:
+      move_threshold:
+        name: g8 move threshold
+      still_threshold:
+        name: g8 still threshold
+
+select:
+  - platform: ld2410
+    distance_resolution:
+      name: distance resolution
+    baud_rate:
+      name: baud rate
+    light_function:
+      name: light function
+    out_pin_level:
+      name: out ping level
+
+sensor:
+  - platform: ld2410
+    light:
+      name: light
+    moving_distance:
+      name: Moving distance
+    still_distance:
+      name: Still Distance
+    moving_energy:
+      name: Move Energy
+    still_energy:
+      name: Still Energy
+    detection_distance:
+      name: Distance Detection
+    g0:
+      move_energy:
+        name: g0 move energy
+      still_energy:
+        name: g0 still energy
+    g1:
+      move_energy:
+        name: g1 move energy
+      still_energy:
+        name: g1 still energy
+    g2:
+      move_energy:
+        name: g2 move energy
+      still_energy:
+        name: g2 still energy
+    g3:
+      move_energy:
+        name: g3 move energy
+      still_energy:
+        name: g3 still energy
+    g4:
+      move_energy:
+        name: g4 move energy
+      still_energy:
+        name: g4 still energy
+    g5:
+      move_energy:
+        name: g5 move energy
+      still_energy:
+        name: g5 still energy
+    g6:
+      move_energy:
+        name: g6 move energy
+      still_energy:
+        name: g6 still energy
+    g7:
+      move_energy:
+        name: g7 move energy
+      still_energy:
+        name: g7 still energy
+    g8:
+      move_energy:
+        name: g8 move energy
+      still_energy:
+        name: g8 still energy
+
+switch:
+  - platform: ld2410
+    engineering_mode:
+      name: control ld2410 engineering mode
+    bluetooth:
+      name: control ld2410 bluetooth
+
+text_sensor:
+  - platform: ld2410
+    version:
+      name: presenece sensor version
+    mac_address:
+      name: presenece sensor mac address

tests/components/ld2410/test.rp2040.yaml

@@ -0,0 +1,169 @@
+uart:
+  - id: uart_ld2410
+    tx_pin: 4
+    rx_pin: 5
+    baud_rate: 9600
+
+ld2410:
+  id: my_ld2410
+
+binary_sensor:
+  - platform: ld2410
+    has_target:
+      name: presence
+    has_moving_target:
+      name: movement
+    has_still_target:
+      name: still
+    out_pin_presence_status:
+      name: out pin presence status
+
+button:
+  - platform: ld2410
+    factory_reset:
+      name: factory reset
+    restart:
+      name: restart
+    query_params:
+      name: query params
+
+number:
+  - platform: ld2410
+    light_threshold:
+      name: light threshold
+    timeout:
+      name: timeout
+    max_move_distance_gate:
+      name: max move distance gate
+    max_still_distance_gate:
+      name: max still distance gate
+    g0:
+      move_threshold:
+        name: g0 move threshold
+      still_threshold:
+        name: g0 still threshold
+    g1:
+      move_threshold:
+        name: g1 move threshold
+      still_threshold:
+        name: g1 still threshold
+    g2:
+      move_threshold:
+        name: g2 move threshold
+      still_threshold:
+        name: g2 still threshold
+    g3:
+      move_threshold:
+        name: g3 move threshold
+      still_threshold:
+        name: g3 still threshold
+    g4:
+      move_threshold:
+        name: g4 move threshold
+      still_threshold:
+        name: g4 still threshold
+    g5:
+      move_threshold:
+        name: g5 move threshold
+      still_threshold:
+        name: g5 still threshold
+    g6:
+      move_threshold:
+        name: g6 move threshold
+      still_threshold:
+        name: g6 still threshold
+    g7:
+      move_threshold:
+        name: g7 move threshold
+      still_threshold:
+        name: g7 still threshold
+    g8:
+      move_threshold:
+        name: g8 move threshold
+      still_threshold:
+        name: g8 still threshold
+
+select:
+  - platform: ld2410
+    distance_resolution:
+      name: distance resolution
+    baud_rate:
+      name: baud rate
+    light_function:
+      name: light function
+    out_pin_level:
+      name: out ping level
+
+sensor:
+  - platform: ld2410
+    light:
+      name: light
+    moving_distance:
+      name: Moving distance
+    still_distance:
+      name: Still Distance
+    moving_energy:
+      name: Move Energy
+    still_energy:
+      name: Still Energy
+    detection_distance:
+      name: Distance Detection
+    g0:
+      move_energy:
+        name: g0 move energy
+      still_energy:
+        name: g0 still energy
+    g1:
+      move_energy:
+        name: g1 move energy
+      still_energy:
+        name: g1 still energy
+    g2:
+      move_energy:
+        name: g2 move energy
+      still_energy:
+        name: g2 still energy
+    g3:
+      move_energy:
+        name: g3 move energy
+      still_energy:
+        name: g3 still energy
+    g4:
+      move_energy:
+        name: g4 move energy
+      still_energy:
+        name: g4 still energy
+    g5:
+      move_energy:
+        name: g5 move energy
+      still_energy:
+        name: g5 still energy
+    g6:
+      move_energy:
+        name: g6 move energy
+      still_energy:
+        name: g6 still energy
+    g7:
+      move_energy:
+        name: g7 move energy
+      still_energy:
+        name: g7 still energy
+    g8:
+      move_energy:
+        name: g8 move energy
+      still_energy:
+        name: g8 still energy
+
+switch:
+  - platform: ld2410
+    engineering_mode:
+      name: control ld2410 engineering mode
+    bluetooth:
+      name: control ld2410 bluetooth
+
+text_sensor:
+  - platform: ld2410
+    version:
+      name: presenece sensor version
+    mac_address:
+      name: presenece sensor mac address

tests/components/ld2420/test.esp32-c3-idf.yaml

@@ -0,0 +1,132 @@
+uart:
+  - id: uart_ld2420
+    tx_pin: 4
+    rx_pin: 5
+    baud_rate: 9600
+
+ld2420:
+  id: my_ld2420
+
+binary_sensor:
+  - platform: ld2420
+    has_target:
+      name: Presence
+
+button:
+  - platform: ld2420
+    apply_config:
+      name: Apply Config
+    factory_reset:
+      name: Factory Reset
+    restart_module:
+      name: Restart Module
+    revert_config:
+      name: Undo Edits
+
+number:
+  - platform: ld2420
+    presence_timeout:
+      name: Detection Presence Timeout
+    min_gate_distance:
+      name: Detection Gate Minimum
+    max_gate_distance:
+      name: Detection Gate Maximum
+    gate_move_sensitivity:
+      name: Move Calibration Sensitivity Factor
+    gate_still_sensitivity:
+      name: Still Calibration Sensitivity Factor
+    gate_0:
+      move_threshold:
+        name: Gate 0 Move Threshold
+      still_threshold:
+        name: Gate 0 Still Threshold
+    gate_1:
+      move_threshold:
+        name: Gate 1 Move Threshold
+      still_threshold:
+        name: Gate 1 Still Threshold
+    gate_2:
+      move_threshold:
+        name: Gate 2 Move Threshold
+      still_threshold:
+        name: Gate 2 Still Threshold
+    gate_3:
+      move_threshold:
+        name: Gate 3 Move Threshold
+      still_threshold:
+        name: Gate 3 Still Threshold
+    gate_4:
+      move_threshold:
+        name: Gate 4 Move Threshold
+      still_threshold:
+        name: Gate 4 Still Threshold
+    gate_5:
+      move_threshold:
+        name: Gate 5 Move Threshold
+      still_threshold:
+        name: Gate 5 Still Threshold
+    gate_6:
+      move_threshold:
+        name: Gate 6 Move Threshold
+      still_threshold:
+        name: Gate 6 Still Threshold
+    gate_7:
+      move_threshold:
+        name: Gate 7 Move Threshold
+      still_threshold:
+        name: Gate 7 Still Threshold
+    gate_8:
+      move_threshold:
+        name: Gate 8 Move Threshold
+      still_threshold:
+        name: Gate 8 Still Threshold
+    gate_9:
+      move_threshold:
+        name: Gate 9 Move Threshold
+      still_threshold:
+        name: Gate 9 Still Threshold
+    gate_10:
+      move_threshold:
+        name: Gate 10 Move Threshold
+      still_threshold:
+        name: Gate 10 Still Threshold
+    gate_11:
+      move_threshold:
+        name: Gate 11 Move Threshold
+      still_threshold:
+        name: Gate 11 Still Threshold
+    gate_12:
+      move_threshold:
+        name: Gate 12 Move Threshold
+      still_threshold:
+        name: Gate 12 Still Threshold
+    gate_13:
+      move_threshold:
+        name: Gate 13 Move Threshold
+      still_threshold:
+        name: Gate 13 Still Threshold
+    gate_14:
+      move_threshold:
+        name: Gate 14 Move Threshold
+      still_threshold:
+        name: Gate 14 Still Threshold
+    gate_15:
+      move_threshold:
+        name: Gate 15 Move Threshold
+      still_threshold:
+        name: Gate 15 Still Threshold
+
+select:
+  - platform: ld2420
+    operating_mode:
+      name: Operating Mode
+
+sensor:
+  - platform: ld2420
+    moving_distance:
+      name: "Moving distance (cm)"
+
+text_sensor:
+  - platform: ld2420
+    fw_version:
+      name: LD2420 Firmware

tests/components/ld2420/test.esp32-c3.yaml

@@ -0,0 +1,132 @@
+uart:
+  - id: uart_ld2420
+    tx_pin: 4
+    rx_pin: 5
+    baud_rate: 9600
+
+ld2420:
+  id: my_ld2420
+
+binary_sensor:
+  - platform: ld2420
+    has_target:
+      name: Presence
+
+button:
+  - platform: ld2420
+    apply_config:
+      name: Apply Config
+    factory_reset:
+      name: Factory Reset
+    restart_module:
+      name: Restart Module
+    revert_config:
+      name: Undo Edits
+
+number:
+  - platform: ld2420
+    presence_timeout:
+      name: Detection Presence Timeout
+    min_gate_distance:
+      name: Detection Gate Minimum
+    max_gate_distance:
+      name: Detection Gate Maximum
+    gate_move_sensitivity:
+      name: Move Calibration Sensitivity Factor
+    gate_still_sensitivity:
+      name: Still Calibration Sensitivity Factor
+    gate_0:
+      move_threshold:
+        name: Gate 0 Move Threshold
+      still_threshold:
+        name: Gate 0 Still Threshold
+    gate_1:
+      move_threshold:
+        name: Gate 1 Move Threshold
+      still_threshold:
+        name: Gate 1 Still Threshold
+    gate_2:
+      move_threshold:
+        name: Gate 2 Move Threshold
+      still_threshold:
+        name: Gate 2 Still Threshold
+    gate_3:
+      move_threshold:
+        name: Gate 3 Move Threshold
+      still_threshold:
+        name: Gate 3 Still Threshold
+    gate_4:
+      move_threshold:
+        name: Gate 4 Move Threshold
+      still_threshold:
+        name: Gate 4 Still Threshold
+    gate_5:
+      move_threshold:
+        name: Gate 5 Move Threshold
+      still_threshold:
+        name: Gate 5 Still Threshold
+    gate_6:
+      move_threshold:
+        name: Gate 6 Move Threshold
+      still_threshold:
+        name: Gate 6 Still Threshold
+    gate_7:
+      move_threshold:
+        name: Gate 7 Move Threshold
+      still_threshold:
+        name: Gate 7 Still Threshold
+    gate_8:
+      move_threshold:
+        name: Gate 8 Move Threshold
+      still_threshold:
+        name: Gate 8 Still Threshold
+    gate_9:
+      move_threshold:
+        name: Gate 9 Move Threshold
+      still_threshold:
+        name: Gate 9 Still Threshold
+    gate_10:
+      move_threshold:
+        name: Gate 10 Move Threshold
+      still_threshold:
+        name: Gate 10 Still Threshold
+    gate_11:
+      move_threshold:
+        name: Gate 11 Move Threshold
+      still_threshold:
+        name: Gate 11 Still Threshold
+    gate_12:
+      move_threshold:
+        name: Gate 12 Move Threshold
+      still_threshold:
+        name: Gate 12 Still Threshold
+    gate_13:
+      move_threshold:
+        name: Gate 13 Move Threshold
+      still_threshold:
+        name: Gate 13 Still Threshold
+    gate_14:
+      move_threshold:
+        name: Gate 14 Move Threshold
+      still_threshold:
+        name: Gate 14 Still Threshold
+    gate_15:
+      move_threshold:
+        name: Gate 15 Move Threshold
+      still_threshold:
+        name: Gate 15 Still Threshold
+
+select:
+  - platform: ld2420
+    operating_mode:
+      name: Operating Mode
+
+sensor:
+  - platform: ld2420
+    moving_distance:
+      name: "Moving distance (cm)"
+
+text_sensor:
+  - platform: ld2420
+    fw_version:
+      name: LD2420 Firmware

tests/components/ld2420/test.esp32-idf.yaml

@@ -0,0 +1,132 @@
+uart:
+  - id: uart_ld2420
+    tx_pin: 17
+    rx_pin: 16
+    baud_rate: 9600
+
+ld2420:
+  id: my_ld2420
+
+binary_sensor:
+  - platform: ld2420
+    has_target:
+      name: Presence
+
+button:
+  - platform: ld2420
+    apply_config:
+      name: Apply Config
+    factory_reset:
+      name: Factory Reset
+    restart_module:
+      name: Restart Module
+    revert_config:
+      name: Undo Edits
+
+number:
+  - platform: ld2420
+    presence_timeout:
+      name: Detection Presence Timeout
+    min_gate_distance:
+      name: Detection Gate Minimum
+    max_gate_distance:
+      name: Detection Gate Maximum
+    gate_move_sensitivity:
+      name: Move Calibration Sensitivity Factor
+    gate_still_sensitivity:
+      name: Still Calibration Sensitivity Factor
+    gate_0:
+      move_threshold:
+        name: Gate 0 Move Threshold
+      still_threshold:
+        name: Gate 0 Still Threshold
+    gate_1:
+      move_threshold:
+        name: Gate 1 Move Threshold
+      still_threshold:
+        name: Gate 1 Still Threshold
+    gate_2:
+      move_threshold:
+        name: Gate 2 Move Threshold
+      still_threshold:
+        name: Gate 2 Still Threshold
+    gate_3:
+      move_threshold:
+        name: Gate 3 Move Threshold
+      still_threshold:
+        name: Gate 3 Still Threshold
+    gate_4:
+      move_threshold:
+        name: Gate 4 Move Threshold
+      still_threshold:
+        name: Gate 4 Still Threshold
+    gate_5:
+      move_threshold:
+        name: Gate 5 Move Threshold
+      still_threshold:
+        name: Gate 5 Still Threshold
+    gate_6:
+      move_threshold:
+        name: Gate 6 Move Threshold
+      still_threshold:
+        name: Gate 6 Still Threshold
+    gate_7:
+      move_threshold:
+        name: Gate 7 Move Threshold
+      still_threshold:
+        name: Gate 7 Still Threshold
+    gate_8:
+      move_threshold:
+        name: Gate 8 Move Threshold
+      still_threshold:
+        name: Gate 8 Still Threshold
+    gate_9:
+      move_threshold:
+        name: Gate 9 Move Threshold
+      still_threshold:
+        name: Gate 9 Still Threshold
+    gate_10:
+      move_threshold:
+        name: Gate 10 Move Threshold
+      still_threshold:
+        name: Gate 10 Still Threshold
+    gate_11:
+      move_threshold:
+        name: Gate 11 Move Threshold
+      still_threshold:
+        name: Gate 11 Still Threshold
+    gate_12:
+      move_threshold:
+        name: Gate 12 Move Threshold
+      still_threshold:
+        name: Gate 12 Still Threshold
+    gate_13:
+      move_threshold:
+        name: Gate 13 Move Threshold
+      still_threshold:
+        name: Gate 13 Still Threshold
+    gate_14:
+      move_threshold:
+        name: Gate 14 Move Threshold
+      still_threshold:
+        name: Gate 14 Still Threshold
+    gate_15:
+      move_threshold:
+        name: Gate 15 Move Threshold
+      still_threshold:
+        name: Gate 15 Still Threshold
+
+select:
+  - platform: ld2420
+    operating_mode:
+      name: Operating Mode
+
+sensor:
+  - platform: ld2420
+    moving_distance:
+      name: "Moving distance (cm)"
+
+text_sensor:
+  - platform: ld2420
+    fw_version:
+      name: LD2420 Firmware

tests/components/ld2420/test.esp32.yaml

@@ -0,0 +1,132 @@
+uart:
+  - id: uart_ld2420
+    tx_pin: 17
+    rx_pin: 16
+    baud_rate: 9600
+
+ld2420:
+  id: my_ld2420
+
+binary_sensor:
+  - platform: ld2420
+    has_target:
+      name: Presence
+
+button:
+  - platform: ld2420
+    apply_config:
+      name: Apply Config
+    factory_reset:
+      name: Factory Reset
+    restart_module:
+      name: Restart Module
+    revert_config:
+      name: Undo Edits
+
+number:
+  - platform: ld2420
+    presence_timeout:
+      name: Detection Presence Timeout
+    min_gate_distance:
+      name: Detection Gate Minimum
+    max_gate_distance:
+      name: Detection Gate Maximum
+    gate_move_sensitivity:
+      name: Move Calibration Sensitivity Factor
+    gate_still_sensitivity:
+      name: Still Calibration Sensitivity Factor
+    gate_0:
+      move_threshold:
+        name: Gate 0 Move Threshold
+      still_threshold:
+        name: Gate 0 Still Threshold
+    gate_1:
+      move_threshold:
+        name: Gate 1 Move Threshold
+      still_threshold:
+        name: Gate 1 Still Threshold
+    gate_2:
+      move_threshold:
+        name: Gate 2 Move Threshold
+      still_threshold:
+        name: Gate 2 Still Threshold
+    gate_3:
+      move_threshold:
+        name: Gate 3 Move Threshold
+      still_threshold:
+        name: Gate 3 Still Threshold
+    gate_4:
+      move_threshold:
+        name: Gate 4 Move Threshold
+      still_threshold:
+        name: Gate 4 Still Threshold
+    gate_5:
+      move_threshold:
+        name: Gate 5 Move Threshold
+      still_threshold:
+        name: Gate 5 Still Threshold
+    gate_6:
+      move_threshold:
+        name: Gate 6 Move Threshold
+      still_threshold:
+        name: Gate 6 Still Threshold
+    gate_7:
+      move_threshold:
+        name: Gate 7 Move Threshold
+      still_threshold:
+        name: Gate 7 Still Threshold
+    gate_8:
+      move_threshold:
+        name: Gate 8 Move Threshold
+      still_threshold:
+        name: Gate 8 Still Threshold
+    gate_9:
+      move_threshold:
+        name: Gate 9 Move Threshold
+      still_threshold:
+        name: Gate 9 Still Threshold
+    gate_10:
+      move_threshold:
+        name: Gate 10 Move Threshold
+      still_threshold:
+        name: Gate 10 Still Threshold
+    gate_11:
+      move_threshold:
+        name: Gate 11 Move Threshold
+      still_threshold:
+        name: Gate 11 Still Threshold
+    gate_12:
+      move_threshold:
+        name: Gate 12 Move Threshold
+      still_threshold:
+        name: Gate 12 Still Threshold
+    gate_13:
+      move_threshold:
+        name: Gate 13 Move Threshold
+      still_threshold:
+        name: Gate 13 Still Threshold
+    gate_14:
+      move_threshold:
+        name: Gate 14 Move Threshold
+      still_threshold:
+        name: Gate 14 Still Threshold
+    gate_15:
+      move_threshold:
+        name: Gate 15 Move Threshold
+      still_threshold:
+        name: Gate 15 Still Threshold
+
+select:
+  - platform: ld2420
+    operating_mode:
+      name: Operating Mode
+
+sensor:
+  - platform: ld2420
+    moving_distance:
+      name: "Moving distance (cm)"
+
+text_sensor:
+  - platform: ld2420
+    fw_version:
+      name: LD2420 Firmware

tests/components/ld2420/test.esp8266.yaml

@@ -0,0 +1,132 @@
+uart:
+  - id: uart_ld2420
+    tx_pin: 4
+    rx_pin: 5
+    baud_rate: 9600
+
+ld2420:
+  id: my_ld2420
+
+binary_sensor:
+  - platform: ld2420
+    has_target:
+      name: Presence
+
+button:
+  - platform: ld2420
+    apply_config:
+      name: Apply Config
+    factory_reset:
+      name: Factory Reset
+    restart_module:
+      name: Restart Module
+    revert_config:
+      name: Undo Edits
+
+number:
+  - platform: ld2420
+    presence_timeout:
+      name: Detection Presence Timeout
+    min_gate_distance:
+      name: Detection Gate Minimum
+    max_gate_distance:
+      name: Detection Gate Maximum
+    gate_move_sensitivity:
+      name: Move Calibration Sensitivity Factor
+    gate_still_sensitivity:
+      name: Still Calibration Sensitivity Factor
+    gate_0:
+      move_threshold:
+        name: Gate 0 Move Threshold
+      still_threshold:
+        name: Gate 0 Still Threshold
+    gate_1:
+      move_threshold:
+        name: Gate 1 Move Threshold
+      still_threshold:
+        name: Gate 1 Still Threshold
+    gate_2:
+      move_threshold:
+        name: Gate 2 Move Threshold
+      still_threshold:
+        name: Gate 2 Still Threshold
+    gate_3:
+      move_threshold:
+        name: Gate 3 Move Threshold
+      still_threshold:
+        name: Gate 3 Still Threshold
+    gate_4:
+      move_threshold:
+        name: Gate 4 Move Threshold
+      still_threshold:
+        name: Gate 4 Still Threshold
+    gate_5:
+      move_threshold:
+        name: Gate 5 Move Threshold
+      still_threshold:
+        name: Gate 5 Still Threshold
+    gate_6:
+      move_threshold:
+        name: Gate 6 Move Threshold
+      still_threshold:
+        name: Gate 6 Still Threshold
+    gate_7:
+      move_threshold:
+        name: Gate 7 Move Threshold
+      still_threshold:
+        name: Gate 7 Still Threshold
+    gate_8:
+      move_threshold:
+        name: Gate 8 Move Threshold
+      still_threshold:
+        name: Gate 8 Still Threshold
+    gate_9:
+      move_threshold:
+        name: Gate 9 Move Threshold
+      still_threshold:
+        name: Gate 9 Still Threshold
+    gate_10:
+      move_threshold:
+        name: Gate 10 Move Threshold
+      still_threshold:
+        name: Gate 10 Still Threshold
+    gate_11:
+      move_threshold:
+        name: Gate 11 Move Threshold
+      still_threshold:
+        name: Gate 11 Still Threshold
+    gate_12:
+      move_threshold:
+        name: Gate 12 Move Threshold
+      still_threshold:
+        name: Gate 12 Still Threshold
+    gate_13:
+      move_threshold:
+        name: Gate 13 Move Threshold
+      still_threshold:
+        name: Gate 13 Still Threshold
+    gate_14:
+      move_threshold:
+        name: Gate 14 Move Threshold
+      still_threshold:
+        name: Gate 14 Still Threshold
+    gate_15:
+      move_threshold:
+        name: Gate 15 Move Threshold
+      still_threshold:
+        name: Gate 15 Still Threshold
+
+select:
+  - platform: ld2420
+    operating_mode:
+      name: Operating Mode
+
+sensor:
+  - platform: ld2420
+    moving_distance:
+      name: "Moving distance (cm)"
+
+text_sensor:
+  - platform: ld2420
+    fw_version:
+      name: LD2420 Firmware

tests/components/ld2420/test.rp2040.yaml

@@ -0,0 +1,132 @@
+uart:
+  - id: uart_ld2420
+    tx_pin: 4
+    rx_pin: 5
+    baud_rate: 9600
+
+ld2420:
+  id: my_ld2420
+
+binary_sensor:
+  - platform: ld2420
+    has_target:
+      name: Presence
+
+button:
+  - platform: ld2420
+    apply_config:
+      name: Apply Config
+    factory_reset:
+      name: Factory Reset
+    restart_module:
+      name: Restart Module
+    revert_config:
+      name: Undo Edits
+
+number:
+  - platform: ld2420
+    presence_timeout:
+      name: Detection Presence Timeout
+    min_gate_distance:
+      name: Detection Gate Minimum
+    max_gate_distance:
+      name: Detection Gate Maximum
+    gate_move_sensitivity:
+      name: Move Calibration Sensitivity Factor
+    gate_still_sensitivity:
+      name: Still Calibration Sensitivity Factor
+    gate_0:
+      move_threshold:
+        name: Gate 0 Move Threshold
+      still_threshold:
+        name: Gate 0 Still Threshold
+    gate_1:
+      move_threshold:
+        name: Gate 1 Move Threshold
+      still_threshold:
+        name: Gate 1 Still Threshold
+    gate_2:
+      move_threshold:
+        name: Gate 2 Move Threshold
+      still_threshold:
+        name: Gate 2 Still Threshold
+    gate_3:
+      move_threshold:
+        name: Gate 3 Move Threshold
+      still_threshold:
+        name: Gate 3 Still Threshold
+    gate_4:
+      move_threshold:
+        name: Gate 4 Move Threshold
+      still_threshold:
+        name: Gate 4 Still Threshold
+    gate_5:
+      move_threshold:
+        name: Gate 5 Move Threshold
+      still_threshold:
+        name: Gate 5 Still Threshold
+    gate_6:
+      move_threshold:
+        name: Gate 6 Move Threshold
+      still_threshold:
+        name: Gate 6 Still Threshold
+    gate_7:
+      move_threshold:
+        name: Gate 7 Move Threshold
+      still_threshold:
+        name: Gate 7 Still Threshold
+    gate_8:
+      move_threshold:
+        name: Gate 8 Move Threshold
+      still_threshold:
+        name: Gate 8 Still Threshold
+    gate_9:
+      move_threshold:
+        name: Gate 9 Move Threshold
+      still_threshold:
+        name: Gate 9 Still Threshold
+    gate_10:
+      move_threshold:
+        name: Gate 10 Move Threshold
+      still_threshold:
+        name: Gate 10 Still Threshold
+    gate_11:
+      move_threshold:
+        name: Gate 11 Move Threshold
+      still_threshold:
+        name: Gate 11 Still Threshold
+    gate_12:
+      move_threshold:
+        name: Gate 12 Move Threshold
+      still_threshold:
+        name: Gate 12 Still Threshold
+    gate_13:
+      move_threshold:
+        name: Gate 13 Move Threshold
+      still_threshold:
+        name: Gate 13 Still Threshold
+    gate_14:
+      move_threshold:
+        name: Gate 14 Move Threshold
+      still_threshold:
+        name: Gate 14 Still Threshold
+    gate_15:
+      move_threshold:
+        name: Gate 15 Move Threshold
+      still_threshold:
+        name: Gate 15 Still Threshold
+
+select:
+  - platform: ld2420
+    operating_mode:
+      name: Operating Mode
+
+sensor:
+  - platform: ld2420
+    moving_distance:
+      name: "Moving distance (cm)"
+
+text_sensor:
+  - platform: ld2420
+    fw_version:
+      name: LD2420 Firmware

tests/components/ledc/test.esp32-c3-idf.yaml

@@ -0,0 +1,11 @@
+esphome:
+  on_boot:
+    then:
+      - output.ledc.set_frequency:
+          id: test_ledc
+          frequency: 100Hz
+
+output:
+  - platform: ledc
+    id: test_ledc
+    pin: 4

tests/components/ledc/test.esp32-c3.yaml

@@ -0,0 +1,11 @@
+esphome:
+  on_boot:
+    then:
+      - output.ledc.set_frequency:
+          id: test_ledc
+          frequency: 100Hz
+
+output:
+  - platform: ledc
+    id: test_ledc
+    pin: 4

tests/components/ledc/test.esp32-idf.yaml

@@ -0,0 +1,11 @@
+esphome:
+  on_boot:
+    then:
+      - output.ledc.set_frequency:
+          id: test_ledc
+          frequency: 100Hz
+
+output:
+  - platform: ledc
+    id: test_ledc
+    pin: 4

tests/components/ledc/test.esp32.yaml

@@ -0,0 +1,11 @@
+esphome:
+  on_boot:
+    then:
+      - output.ledc.set_frequency:
+          id: test_ledc
+          frequency: 100Hz
+
+output:
+  - platform: ledc
+    id: test_ledc
+    pin: 4

tests/components/light/test.esp32-c3-idf.yaml

@@ -0,0 +1,132 @@
+esphome:
+  on_boot:
+    then:
+      - light.toggle: test_binary_light
+      - light.turn_off: test_rgb_light
+      - light.turn_on:
+          id: test_rgb_light
+          brightness: 100%
+          red: 100%
+          green: 100%
+          blue: 1.0
+      - light.control:
+          id: test_monochromatic_light
+          state: on
+      - light.dim_relative:
+          id: test_monochromatic_light
+          relative_brightness: 5%
+
+output:
+  - platform: gpio
+    id: test_binary
+    pin: 0
+  - platform: ledc
+    id: test_ledc_1
+    pin: 1
+  - platform: ledc
+    id: test_ledc_2
+    pin: 2
+  - platform: ledc
+    id: test_ledc_3
+    pin: 3
+  - platform: ledc
+    id: test_ledc_4
+    pin: 4
+  - platform: ledc
+    id: test_ledc_5
+    pin: 5
+
+light:
+  - platform: binary
+    id: test_binary_light
+    name: Binary Light
+    output: test_binary
+    effects:
+      - strobe:
+    on_state:
+      - logger.log: Binary light state changed
+  - platform: monochromatic
+    id: test_monochromatic_light
+    name: Monochromatic Light
+    output: test_ledc_1
+    gamma_correct: 2.8
+    default_transition_length: 2s
+    effects:
+      - strobe:
+      - flicker:
+      - flicker:
+          name: My Flicker
+          alpha: 98%
+          intensity: 1.5%
+      - lambda:
+          name: My Custom Effect
+          update_interval: 1s
+          lambda: |-
+            static int state = 0;
+            state += 1;
+            if (state == 4)
+              state = 0;
+      - pulse:
+          transition_length: 10s
+          update_interval: 20s
+          min_brightness: 10%
+          max_brightness: 90%
+      - pulse:
+          name: pulse2
+          transition_length:
+            on_length: 10s
+            off_length: 5s
+          update_interval: 15s
+          min_brightness: 10%
+          max_brightness: 90%
+  - platform: rgb
+    id: test_rgb_light
+    name: RGB Light
+    red: test_ledc_1
+    green: test_ledc_2
+    blue: test_ledc_3
+  - platform: rgbw
+    id: test_rgbw_light
+    name: RGBW Light
+    red: test_ledc_1
+    green: test_ledc_2
+    blue: test_ledc_3
+    white: test_ledc_4
+    color_interlock: true
+  - platform: rgbww
+    id: test_rgbww_light
+    name: RGBWW Light
+    red: test_ledc_1
+    green: test_ledc_2
+    blue: test_ledc_3
+    cold_white: test_ledc_4
+    warm_white: test_ledc_5
+    cold_white_color_temperature: 153 mireds
+    warm_white_color_temperature: 500 mireds
+    color_interlock: true
+  - platform: rgbct
+    id: test_rgbct_light
+    name: RGBCT Light
+    red: test_ledc_1
+    green: test_ledc_2
+    blue: test_ledc_3
+    color_temperature: test_ledc_4
+    white_brightness: test_ledc_5
+    cold_white_color_temperature: 153 mireds
+    warm_white_color_temperature: 500 mireds
+    color_interlock: true
+  - platform: cwww
+    id: test_cwww_light
+    name: CWWW Light
+    cold_white: test_ledc_1
+    warm_white: test_ledc_2
+    cold_white_color_temperature: 153 mireds
+    warm_white_color_temperature: 500 mireds
+    constant_brightness: true
+  - platform: color_temperature
+    id: test_color_temperature_light
+    name: CT Light
+    color_temperature: test_ledc_1
+    brightness: test_ledc_2
+    cold_white_color_temperature: 153 mireds
+    warm_white_color_temperature: 500 mireds

tests/components/light/test.esp32-c3.yaml

@@ -0,0 +1,132 @@
+esphome:
+  on_boot:
+    then:
+      - light.toggle: test_binary_light
+      - light.turn_off: test_rgb_light
+      - light.turn_on:
+          id: test_rgb_light
+          brightness: 100%
+          red: 100%
+          green: 100%
+          blue: 1.0
+      - light.control:
+          id: test_monochromatic_light
+          state: on
+      - light.dim_relative:
+          id: test_monochromatic_light
+          relative_brightness: 5%
+
+output:
+  - platform: gpio
+    id: test_binary
+    pin: 0
+  - platform: ledc
+    id: test_ledc_1
+    pin: 1
+  - platform: ledc
+    id: test_ledc_2
+    pin: 2
+  - platform: ledc
+    id: test_ledc_3
+    pin: 3
+  - platform: ledc
+    id: test_ledc_4
+    pin: 4
+  - platform: ledc
+    id: test_ledc_5
+    pin: 5
+
+light:
+  - platform: binary
+    id: test_binary_light
+    name: Binary Light
+    output: test_binary
+    effects:
+      - strobe:
+    on_state:
+      - logger.log: Binary light state changed
+  - platform: monochromatic
+    id: test_monochromatic_light
+    name: Monochromatic Light
+    output: test_ledc_1
+    gamma_correct: 2.8
+    default_transition_length: 2s
+    effects:
+      - strobe:
+      - flicker:
+      - flicker:
+          name: My Flicker
+          alpha: 98%
+          intensity: 1.5%
+      - lambda:
+          name: My Custom Effect
+          update_interval: 1s
+          lambda: |-
+            static int state = 0;
+            state += 1;
+            if (state == 4)
+              state = 0;
+      - pulse:
+          transition_length: 10s
+          update_interval: 20s
+          min_brightness: 10%
+          max_brightness: 90%
+      - pulse:
+          name: pulse2
+          transition_length:
+            on_length: 10s
+            off_length: 5s
+          update_interval: 15s
+          min_brightness: 10%
+          max_brightness: 90%
+  - platform: rgb
+    id: test_rgb_light
+    name: RGB Light
+    red: test_ledc_1
+    green: test_ledc_2
+    blue: test_ledc_3
+  - platform: rgbw
+    id: test_rgbw_light
+    name: RGBW Light
+    red: test_ledc_1
+    green: test_ledc_2
+    blue: test_ledc_3
+    white: test_ledc_4
+    color_interlock: true
+  - platform: rgbww
+    id: test_rgbww_light
+    name: RGBWW Light
+    red: test_ledc_1
+    green: test_ledc_2
+    blue: test_ledc_3
+    cold_white: test_ledc_4
+    warm_white: test_ledc_5
+    cold_white_color_temperature: 153 mireds
+    warm_white_color_temperature: 500 mireds
+    color_interlock: true
+  - platform: rgbct
+    id: test_rgbct_light
+    name: RGBCT Light
+    red: test_ledc_1
+    green: test_ledc_2
+    blue: test_ledc_3
+    color_temperature: test_ledc_4
+    white_brightness: test_ledc_5
+    cold_white_color_temperature: 153 mireds
+    warm_white_color_temperature: 500 mireds
+    color_interlock: true
+  - platform: cwww
+    id: test_cwww_light
+    name: CWWW Light
+    cold_white: test_ledc_1
+    warm_white: test_ledc_2
+    cold_white_color_temperature: 153 mireds
+    warm_white_color_temperature: 500 mireds
+    constant_brightness: true
+  - platform: color_temperature
+    id: test_color_temperature_light
+    name: CT Light
+    color_temperature: test_ledc_1
+    brightness: test_ledc_2
+    cold_white_color_temperature: 153 mireds
+    warm_white_color_temperature: 500 mireds

tests/components/light/test.esp32-idf.yaml

@@ -0,0 +1,132 @@
+esphome:
+  on_boot:
+    then:
+      - light.toggle: test_binary_light
+      - light.turn_off: test_rgb_light
+      - light.turn_on:
+          id: test_rgb_light
+          brightness: 100%
+          red: 100%
+          green: 100%
+          blue: 1.0
+      - light.control:
+          id: test_monochromatic_light
+          state: on
+      - light.dim_relative:
+          id: test_monochromatic_light
+          relative_brightness: 5%
+
+output:
+  - platform: gpio
+    id: test_binary
+    pin: 12
+  - platform: ledc
+    id: test_ledc_1
+    pin: 13
+  - platform: ledc
+    id: test_ledc_2
+    pin: 14
+  - platform: ledc
+    id: test_ledc_3
+    pin: 15
+  - platform: ledc
+    id: test_ledc_4
+    pin: 16
+  - platform: ledc
+    id: test_ledc_5
+    pin: 17
+
+light:
+  - platform: binary
+    id: test_binary_light
+    name: Binary Light
+    output: test_binary
+    effects:
+      - strobe:
+    on_state:
+      - logger.log: Binary light state changed
+  - platform: monochromatic
+    id: test_monochromatic_light
+    name: Monochromatic Light
+    output: test_ledc_1
+    gamma_correct: 2.8
+    default_transition_length: 2s
+    effects:
+      - strobe:
+      - flicker:
+      - flicker:
+          name: My Flicker
+          alpha: 98%
+          intensity: 1.5%
+      - lambda:
+          name: My Custom Effect
+          update_interval: 1s
+          lambda: |-
+            static int state = 0;
+            state += 1;
+            if (state == 4)
+              state = 0;
+      - pulse:
+          transition_length: 10s
+          update_interval: 20s
+          min_brightness: 10%
+          max_brightness: 90%
+      - pulse:
+          name: pulse2
+          transition_length:
+            on_length: 10s
+            off_length: 5s
+          update_interval: 15s
+          min_brightness: 10%
+          max_brightness: 90%
+  - platform: rgb
+    id: test_rgb_light
+    name: RGB Light
+    red: test_ledc_1
+    green: test_ledc_2
+    blue: test_ledc_3
+  - platform: rgbw
+    id: test_rgbw_light
+    name: RGBW Light
+    red: test_ledc_1
+    green: test_ledc_2
+    blue: test_ledc_3
+    white: test_ledc_4
+    color_interlock: true
+  - platform: rgbww
+    id: test_rgbww_light
+    name: RGBWW Light
+    red: test_ledc_1
+    green: test_ledc_2
+    blue: test_ledc_3
+    cold_white: test_ledc_4
+    warm_white: test_ledc_5
+    cold_white_color_temperature: 153 mireds
+    warm_white_color_temperature: 500 mireds
+    color_interlock: true
+  - platform: rgbct
+    id: test_rgbct_light
+    name: RGBCT Light
+    red: test_ledc_1
+    green: test_ledc_2
+    blue: test_ledc_3
+    color_temperature: test_ledc_4
+    white_brightness: test_ledc_5
+    cold_white_color_temperature: 153 mireds
+    warm_white_color_temperature: 500 mireds
+    color_interlock: true
+  - platform: cwww
+    id: test_cwww_light
+    name: CWWW Light
+    cold_white: test_ledc_1
+    warm_white: test_ledc_2
+    cold_white_color_temperature: 153 mireds
+    warm_white_color_temperature: 500 mireds
+    constant_brightness: true
+  - platform: color_temperature
+    id: test_color_temperature_light
+    name: CT Light
+    color_temperature: test_ledc_1
+    brightness: test_ledc_2
+    cold_white_color_temperature: 153 mireds
+    warm_white_color_temperature: 500 mireds

tests/components/light/test.esp32.yaml

@@ -0,0 +1,132 @@
+esphome:
+  on_boot:
+    then:
+      - light.toggle: test_binary_light
+      - light.turn_off: test_rgb_light
+      - light.turn_on:
+          id: test_rgb_light
+          brightness: 100%
+          red: 100%
+          green: 100%
+          blue: 1.0
+      - light.control:
+          id: test_monochromatic_light
+          state: on
+      - light.dim_relative:
+          id: test_monochromatic_light
+          relative_brightness: 5%
+
+output:
+  - platform: gpio
+    id: test_binary
+    pin: 12
+  - platform: ledc
+    id: test_ledc_1
+    pin: 13
+  - platform: ledc
+    id: test_ledc_2
+    pin: 14
+  - platform: ledc
+    id: test_ledc_3
+    pin: 15
+  - platform: ledc
+    id: test_ledc_4
+    pin: 16
+  - platform: ledc
+    id: test_ledc_5
+    pin: 17
+
+light:
+  - platform: binary
+    id: test_binary_light
+    name: Binary Light
+    output: test_binary
+    effects:
+      - strobe:
+    on_state:
+      - logger.log: Binary light state changed
+  - platform: monochromatic
+    id: test_monochromatic_light
+    name: Monochromatic Light
+    output: test_ledc_1
+    gamma_correct: 2.8
+    default_transition_length: 2s
+    effects:
+      - strobe:
+      - flicker:
+      - flicker:
+          name: My Flicker
+          alpha: 98%
+          intensity: 1.5%
+      - lambda:
+          name: My Custom Effect
+          update_interval: 1s
+          lambda: |-
+            static int state = 0;
+            state += 1;
+            if (state == 4)
+              state = 0;
+      - pulse:
+          transition_length: 10s
+          update_interval: 20s
+          min_brightness: 10%
+          max_brightness: 90%
+      - pulse:
+          name: pulse2
+          transition_length:
+            on_length: 10s
+            off_length: 5s
+          update_interval: 15s
+          min_brightness: 10%
+          max_brightness: 90%
+  - platform: rgb
+    id: test_rgb_light
+    name: RGB Light
+    red: test_ledc_1
+    green: test_ledc_2
+    blue: test_ledc_3
+  - platform: rgbw
+    id: test_rgbw_light
+    name: RGBW Light
+    red: test_ledc_1
+    green: test_ledc_2
+    blue: test_ledc_3
+    white: test_ledc_4
+    color_interlock: true
+  - platform: rgbww
+    id: test_rgbww_light
+    name: RGBWW Light
+    red: test_ledc_1
+    green: test_ledc_2
+    blue: test_ledc_3
+    cold_white: test_ledc_4
+    warm_white: test_ledc_5
+    cold_white_color_temperature: 153 mireds
+    warm_white_color_temperature: 500 mireds
+    color_interlock: true
+  - platform: rgbct
+    id: test_rgbct_light
+    name: RGBCT Light
+    red: test_ledc_1
+    green: test_ledc_2
+    blue: test_ledc_3
+    color_temperature: test_ledc_4
+    white_brightness: test_ledc_5
+    cold_white_color_temperature: 153 mireds
+    warm_white_color_temperature: 500 mireds
+    color_interlock: true
+  - platform: cwww
+    id: test_cwww_light
+    name: CWWW Light
+    cold_white: test_ledc_1
+    warm_white: test_ledc_2
+    cold_white_color_temperature: 153 mireds
+    warm_white_color_temperature: 500 mireds
+    constant_brightness: true
+  - platform: color_temperature
+    id: test_color_temperature_light
+    name: CT Light
+    color_temperature: test_ledc_1
+    brightness: test_ledc_2
+    cold_white_color_temperature: 153 mireds
+    warm_white_color_temperature: 500 mireds

tests/components/light/test.esp8266.yaml

@@ -0,0 +1,132 @@
+esphome:
+  on_boot:
+    then:
+      - light.toggle: test_binary_light
+      - light.turn_off: test_rgb_light
+      - light.turn_on:
+          id: test_rgb_light
+          brightness: 100%
+          red: 100%
+          green: 100%
+          blue: 1.0
+      - light.control:
+          id: test_monochromatic_light
+          state: on
+      - light.dim_relative:
+          id: test_monochromatic_light
+          relative_brightness: 5%
+
+output:
+  - platform: gpio
+    id: test_binary
+    pin: 4
+  - platform: esp8266_pwm
+    id: test_ledc_1
+    pin: 12
+  - platform: esp8266_pwm
+    id: test_ledc_2
+    pin: 13
+  - platform: esp8266_pwm
+    id: test_ledc_3
+    pin: 14
+  - platform: esp8266_pwm
+    id: test_ledc_4
+    pin: 15
+  - platform: esp8266_pwm
+    id: test_ledc_5
+    pin: 16
+
+light:
+  - platform: binary
+    id: test_binary_light
+    name: Binary Light
+    output: test_binary
+    effects:
+      - strobe:
+    on_state:
+      - logger.log: Binary light state changed
+  - platform: monochromatic
+    id: test_monochromatic_light
+    name: Monochromatic Light
+    output: test_ledc_1
+    gamma_correct: 2.8
+    default_transition_length: 2s
+    effects:
+      - strobe:
+      - flicker:
+      - flicker:
+          name: My Flicker
+          alpha: 98%
+          intensity: 1.5%
+      - lambda:
+          name: My Custom Effect
+          update_interval: 1s
+          lambda: |-
+            static int state = 0;
+            state += 1;
+            if (state == 4)
+              state = 0;
+      - pulse:
+          transition_length: 10s
+          update_interval: 20s
+          min_brightness: 10%
+          max_brightness: 90%
+      - pulse:
+          name: pulse2
+          transition_length:
+            on_length: 10s
+            off_length: 5s
+          update_interval: 15s
+          min_brightness: 10%
+          max_brightness: 90%
+  - platform: rgb
+    id: test_rgb_light
+    name: RGB Light
+    red: test_ledc_1
+    green: test_ledc_2
+    blue: test_ledc_3
+  - platform: rgbw
+    id: test_rgbw_light
+    name: RGBW Light
+    red: test_ledc_1
+    green: test_ledc_2
+    blue: test_ledc_3
+    white: test_ledc_4
+    color_interlock: true
+  - platform: rgbww
+    id: test_rgbww_light
+    name: RGBWW Light
+    red: test_ledc_1
+    green: test_ledc_2
+    blue: test_ledc_3
+    cold_white: test_ledc_4
+    warm_white: test_ledc_5
+    cold_white_color_temperature: 153 mireds
+    warm_white_color_temperature: 500 mireds
+    color_interlock: true
+  - platform: rgbct
+    id: test_rgbct_light
+    name: RGBCT Light
+    red: test_ledc_1
+    green: test_ledc_2
+    blue: test_ledc_3
+    color_temperature: test_ledc_4
+    white_brightness: test_ledc_5
+    cold_white_color_temperature: 153 mireds
+    warm_white_color_temperature: 500 mireds
+    color_interlock: true
+  - platform: cwww
+    id: test_cwww_light
+    name: CWWW Light
+    cold_white: test_ledc_1
+    warm_white: test_ledc_2
+    cold_white_color_temperature: 153 mireds
+    warm_white_color_temperature: 500 mireds
+    constant_brightness: true
+  - platform: color_temperature
+    id: test_color_temperature_light
+    name: CT Light
+    color_temperature: test_ledc_1
+    brightness: test_ledc_2
+    cold_white_color_temperature: 153 mireds
+    warm_white_color_temperature: 500 mireds

tests/components/light/test.rp2040.yaml

@@ -0,0 +1,132 @@
+esphome:
+  on_boot:
+    then:
+      - light.toggle: test_binary_light
+      - light.turn_off: test_rgb_light
+      - light.turn_on:
+          id: test_rgb_light
+          brightness: 100%
+          red: 100%
+          green: 100%
+          blue: 1.0
+      - light.control:
+          id: test_monochromatic_light
+          state: on
+      - light.dim_relative:
+          id: test_monochromatic_light
+          relative_brightness: 5%
+
+output:
+  - platform: gpio
+    id: test_binary
+    pin: 0
+  - platform: rp2040_pwm
+    id: test_ledc_1
+    pin: 1
+  - platform: rp2040_pwm
+    id: test_ledc_2
+    pin: 2
+  - platform: rp2040_pwm
+    id: test_ledc_3
+    pin: 3
+  - platform: rp2040_pwm
+    id: test_ledc_4
+    pin: 4
+  - platform: rp2040_pwm
+    id: test_ledc_5
+    pin: 5
+
+light:
+  - platform: binary
+    id: test_binary_light
+    name: Binary Light
+    output: test_binary
+    effects:
+      - strobe:
+    on_state:
+      - logger.log: Binary light state changed
+  - platform: monochromatic
+    id: test_monochromatic_light
+    name: Monochromatic Light
+    output: test_ledc_1
+    gamma_correct: 2.8
+    default_transition_length: 2s
+    effects:
+      - strobe:
+      - flicker:
+      - flicker:
+          name: My Flicker
+          alpha: 98%
+          intensity: 1.5%
+      - lambda:
+          name: My Custom Effect
+          update_interval: 1s
+          lambda: |-
+            static int state = 0;
+            state += 1;
+            if (state == 4)
+              state = 0;
+      - pulse:
+          transition_length: 10s
+          update_interval: 20s
+          min_brightness: 10%
+          max_brightness: 90%
+      - pulse:
+          name: pulse2
+          transition_length:
+            on_length: 10s
+            off_length: 5s
+          update_interval: 15s
+          min_brightness: 10%
+          max_brightness: 90%
+  - platform: rgb
+    id: test_rgb_light
+    name: RGB Light
+    red: test_ledc_1
+    green: test_ledc_2
+    blue: test_ledc_3
+  - platform: rgbw
+    id: test_rgbw_light
+    name: RGBW Light
+    red: test_ledc_1
+    green: test_ledc_2
+    blue: test_ledc_3
+    white: test_ledc_4
+    color_interlock: true
+  - platform: rgbww
+    id: test_rgbww_light
+    name: RGBWW Light
+    red: test_ledc_1
+    green: test_ledc_2
+    blue: test_ledc_3
+    cold_white: test_ledc_4
+    warm_white: test_ledc_5
+    cold_white_color_temperature: 153 mireds
+    warm_white_color_temperature: 500 mireds
+    color_interlock: true
+  - platform: rgbct
+    id: test_rgbct_light
+    name: RGBCT Light
+    red: test_ledc_1
+    green: test_ledc_2
+    blue: test_ledc_3
+    color_temperature: test_ledc_4
+    white_brightness: test_ledc_5
+    cold_white_color_temperature: 153 mireds
+    warm_white_color_temperature: 500 mireds
+    color_interlock: true
+  - platform: cwww
+    id: test_cwww_light
+    name: CWWW Light
+    cold_white: test_ledc_1
+    warm_white: test_ledc_2
+    cold_white_color_temperature: 153 mireds
+    warm_white_color_temperature: 500 mireds
+    constant_brightness: true
+  - platform: color_temperature
+    id: test_color_temperature_light
+    name: CT Light
+    color_temperature: test_ledc_1
+    brightness: test_ledc_2
+    cold_white_color_temperature: 153 mireds
+    warm_white_color_temperature: 500 mireds

tests/components/lightwaverf/test.esp8266.yaml

@@ -0,0 +1,13 @@
+lightwaverf:
+  read_pin: 5
+  write_pin: 4
+
+button:
+  - platform: template
+    name: "Turn off sofa"
+    id: light_off_ceiling_sofa
+    on_press:
+      lightwaverf.send_raw:
+        code:  [0x04, 0x00, 0x00, 0x00, 0x0f, 0x03, 0x0d, 0x09, 0x08, 0x08]
+        name: "Sofa"
+        repeat: 1

tests/components/lilygo_t5_47/test.esp32-c3-idf.yaml

@@ -0,0 +1,24 @@
+i2c:
+  - id: i2c_lilygo_t5_47
+    scl: 5
+    sda: 4
+
+display:
+  - platform: ssd1306_i2c
+    id: ssd1306_display
+    model: SSD1306_128X64
+    reset_pin: 3
+    pages:
+      - id: page1
+        lambda: |-
+          it.rectangle(0, 0, it.get_width(), it.get_height());
+
+touchscreen:
+  - platform: lilygo_t5_47
+    id: lilygo_touchscreen
+    interrupt_pin: 6
+    display: ssd1306_display
+    on_touch:
+      - logger.log:
+          format: Touch at (%d, %d)
+          args: [touch.x, touch.y]

tests/components/lilygo_t5_47/test.esp32-c3.yaml

@@ -0,0 +1,24 @@
+i2c:
+  - id: i2c_lilygo_t5_47
+    scl: 5
+    sda: 4
+
+display:
+  - platform: ssd1306_i2c
+    id: ssd1306_display
+    model: SSD1306_128X64
+    reset_pin: 3
+    pages:
+      - id: page1
+        lambda: |-
+          it.rectangle(0, 0, it.get_width(), it.get_height());
+
+touchscreen:
+  - platform: lilygo_t5_47
+    id: lilygo_touchscreen
+    interrupt_pin: 6
+    display: ssd1306_display
+    on_touch:
+      - logger.log:
+          format: Touch at (%d, %d)
+          args: [touch.x, touch.y]

tests/components/lilygo_t5_47/test.esp32-idf.yaml

@@ -0,0 +1,24 @@
+i2c:
+  - id: i2c_lilygo_t5_47
+    scl: 16
+    sda: 17
+
+display:
+  - platform: ssd1306_i2c
+    id: ssd1306_display
+    model: SSD1306_128X64
+    reset_pin: 13
+    pages:
+      - id: page1
+        lambda: |-
+          it.rectangle(0, 0, it.get_width(), it.get_height());
+
+touchscreen:
+  - platform: lilygo_t5_47
+    id: lilygo_touchscreen
+    interrupt_pin: 14
+    display: ssd1306_display
+    on_touch:
+      - logger.log:
+          format: Touch at (%d, %d)
+          args: [touch.x, touch.y]

tests/components/lilygo_t5_47/test.esp32.yaml

@@ -0,0 +1,24 @@
+i2c:
+  - id: i2c_lilygo_t5_47
+    scl: 16
+    sda: 17
+
+display:
+  - platform: ssd1306_i2c
+    id: ssd1306_display
+    model: SSD1306_128X64
+    reset_pin: 13
+    pages:
+      - id: page1
+        lambda: |-
+          it.rectangle(0, 0, it.get_width(), it.get_height());
+
+touchscreen:
+  - platform: lilygo_t5_47
+    id: lilygo_touchscreen
+    interrupt_pin: 14
+    display: ssd1306_display
+    on_touch:
+      - logger.log:
+          format: Touch at (%d, %d)
+          args: [touch.x, touch.y]

tests/components/lilygo_t5_47/test.esp8266.yaml

@@ -0,0 +1,24 @@
+i2c:
+  - id: i2c_lilygo_t5_47
+    scl: 5
+    sda: 4
+
+display:
+  - platform: ssd1306_i2c
+    id: ssd1306_display
+    model: SSD1306_128X64
+    reset_pin: 3
+    pages:
+      - id: page1
+        lambda: |-
+          it.rectangle(0, 0, it.get_width(), it.get_height());
+
+touchscreen:
+  - platform: lilygo_t5_47
+    id: lilygo_touchscreen
+    interrupt_pin: 12
+    display: ssd1306_display
+    on_touch:
+      - logger.log:
+          format: Touch at (%d, %d)
+          args: [touch.x, touch.y]

tests/components/lilygo_t5_47/test.rp2040.yaml

@@ -0,0 +1,24 @@
+i2c:
+  - id: i2c_lilygo_t5_47
+    scl: 5
+    sda: 4
+
+display:
+  - platform: ssd1306_i2c
+    id: ssd1306_display
+    model: SSD1306_128X64
+    reset_pin: 3
+    pages:
+      - id: page1
+        lambda: |-
+          it.rectangle(0, 0, it.get_width(), it.get_height());
+
+touchscreen:
+  - platform: lilygo_t5_47
+    id: lilygo_touchscreen
+    interrupt_pin: 6
+    display: ssd1306_display
+    on_touch:
+      - logger.log:
+          format: Touch at (%d, %d)
+          args: [touch.x, touch.y]

tests/components/lock/test.esp32-c3-idf.yaml

@@ -0,0 +1,36 @@
+esphome:
+  on_boot:
+    then:
+      - lock.lock: test_lock1
+      - lock.unlock: test_lock1
+      - lock.open: test_lock1
+
+output:
+  - platform: gpio
+    id: test_binary
+    pin: 4
+
+lock:
+  - platform: template
+    id: test_lock1
+    name: Template Lock
+    lambda: |-
+      if (millis() > 10000) {
+        return LOCK_STATE_LOCKED;
+      } else {
+        return LOCK_STATE_UNLOCKED;
+      }
+    optimistic: true
+    assumed_state: false
+    on_unlock:
+      - lock.template.publish:
+          id: test_lock1
+          state: !lambda "return LOCK_STATE_UNLOCKED;"
+    on_lock:
+      - lock.template.publish:
+          id: test_lock1
+          state: !lambda "return LOCK_STATE_LOCKED;"
+  - platform: output
+    name: Generic Output Lock
+    id: test_lock2
+    output: test_binary

tests/components/lock/test.esp32-c3.yaml

@@ -0,0 +1,36 @@
+esphome:
+  on_boot:
+    then:
+      - lock.lock: test_lock1
+      - lock.unlock: test_lock1
+      - lock.open: test_lock1
+
+output:
+  - platform: gpio
+    id: test_binary
+    pin: 4
+
+lock:
+  - platform: template
+    id: test_lock1
+    name: Template Lock
+    lambda: |-
+      if (millis() > 10000) {
+        return LOCK_STATE_LOCKED;
+      } else {
+        return LOCK_STATE_UNLOCKED;
+      }
+    optimistic: true
+    assumed_state: false
+    on_unlock:
+      - lock.template.publish:
+          id: test_lock1
+          state: !lambda "return LOCK_STATE_UNLOCKED;"
+    on_lock:
+      - lock.template.publish:
+          id: test_lock1
+          state: !lambda "return LOCK_STATE_LOCKED;"
+  - platform: output
+    name: Generic Output Lock
+    id: test_lock2
+    output: test_binary

tests/components/lock/test.esp32-idf.yaml

@@ -0,0 +1,36 @@
+esphome:
+  on_boot:
+    then:
+      - lock.lock: test_lock1
+      - lock.unlock: test_lock1
+      - lock.open: test_lock1
+
+output:
+  - platform: gpio
+    id: test_binary
+    pin: 4
+
+lock:
+  - platform: template
+    id: test_lock1
+    name: Template Lock
+    lambda: |-
+      if (millis() > 10000) {
+        return LOCK_STATE_LOCKED;
+      } else {
+        return LOCK_STATE_UNLOCKED;
+      }
+    optimistic: true
+    assumed_state: false
+    on_unlock:
+      - lock.template.publish:
+          id: test_lock1
+          state: !lambda "return LOCK_STATE_UNLOCKED;"
+    on_lock:
+      - lock.template.publish:
+          id: test_lock1
+          state: !lambda "return LOCK_STATE_LOCKED;"
+  - platform: output
+    name: Generic Output Lock
+    id: test_lock2
+    output: test_binary

tests/components/lock/test.esp32.yaml

@@ -0,0 +1,36 @@
+esphome:
+  on_boot:
+    then:
+      - lock.lock: test_lock1
+      - lock.unlock: test_lock1
+      - lock.open: test_lock1
+
+output:
+  - platform: gpio
+    id: test_binary
+    pin: 4
+
+lock:
+  - platform: template
+    id: test_lock1
+    name: Template Lock
+    lambda: |-
+      if (millis() > 10000) {
+        return LOCK_STATE_LOCKED;
+      } else {
+        return LOCK_STATE_UNLOCKED;
+      }
+    optimistic: true
+    assumed_state: false
+    on_unlock:
+      - lock.template.publish:
+          id: test_lock1
+          state: !lambda "return LOCK_STATE_UNLOCKED;"
+    on_lock:
+      - lock.template.publish:
+          id: test_lock1
+          state: !lambda "return LOCK_STATE_LOCKED;"
+  - platform: output
+    name: Generic Output Lock
+    id: test_lock2
+    output: test_binary

tests/components/lock/test.esp8266.yaml

@@ -0,0 +1,36 @@
+esphome:
+  on_boot:
+    then:
+      - lock.lock: test_lock1
+      - lock.unlock: test_lock1
+      - lock.open: test_lock1
+
+output:
+  - platform: gpio
+    id: test_binary
+    pin: 4
+
+lock:
+  - platform: template
+    id: test_lock1
+    name: Template Lock
+    lambda: |-
+      if (millis() > 10000) {
+        return LOCK_STATE_LOCKED;
+      } else {
+        return LOCK_STATE_UNLOCKED;
+      }
+    optimistic: true
+    assumed_state: false
+    on_unlock:
+      - lock.template.publish:
+          id: test_lock1
+          state: !lambda "return LOCK_STATE_UNLOCKED;"
+    on_lock:
+      - lock.template.publish:
+          id: test_lock1
+          state: !lambda "return LOCK_STATE_LOCKED;"
+  - platform: output
+    name: Generic Output Lock
+    id: test_lock2
+    output: test_binary

tests/components/lock/test.rp2040.yaml

@@ -0,0 +1,36 @@
+esphome:
+  on_boot:
+    then:
+      - lock.lock: test_lock1
+      - lock.unlock: test_lock1
+      - lock.open: test_lock1
+
+output:
+  - platform: gpio
+    id: test_binary
+    pin: 4
+
+lock:
+  - platform: template
+    id: test_lock1
+    name: Template Lock
+    lambda: |-
+      if (millis() > 10000) {
+        return LOCK_STATE_LOCKED;
+      } else {
+        return LOCK_STATE_UNLOCKED;
+      }
+    optimistic: true
+    assumed_state: false
+    on_unlock:
+      - lock.template.publish:
+          id: test_lock1
+          state: !lambda "return LOCK_STATE_UNLOCKED;"
+    on_lock:
+      - lock.template.publish:
+          id: test_lock1
+          state: !lambda "return LOCK_STATE_LOCKED;"
+  - platform: output
+    name: Generic Output Lock
+    id: test_lock2
+    output: test_binary

tests/components/logger/test.esp32-c3-idf.yaml

@@ -0,0 +1,7 @@
+esphome:
+  on_boot:
+    then:
+      - logger.log: Hello world
+
+logger:
+  level: DEBUG

tests/components/logger/test.esp32-c3.yaml

@@ -0,0 +1,7 @@
+esphome:
+  on_boot:
+    then:
+      - logger.log: Hello world
+
+logger:
+  level: DEBUG

tests/components/logger/test.esp32-idf.yaml

@@ -0,0 +1,7 @@
+esphome:
+  on_boot:
+    then:
+      - logger.log: Hello world
+
+logger:
+  level: DEBUG

tests/components/logger/test.esp32.yaml

@@ -0,0 +1,7 @@
+esphome:
+  on_boot:
+    then:
+      - logger.log: Hello world
+
+logger:
+  level: DEBUG

tests/components/logger/test.esp8266.yaml

@@ -0,0 +1,7 @@
+esphome:
+  on_boot:
+    then:
+      - logger.log: Hello world
+
+logger:
+  level: DEBUG

tests/components/logger/test.rp2040.yaml

@@ -0,0 +1,7 @@
+esphome:
+  on_boot:
+    then:
+      - logger.log: Hello world
+
+logger:
+  level: DEBUG

tests/components/ltr390/test.esp32-c3-idf.yaml

@@ -0,0 +1,20 @@
+i2c:
+  - id: i2c_ltr390
+    scl: 5
+    sda: 4
+
+sensor:
+  - platform: ltr390
+    uv:
+      name: LTR390 UV
+    uv_index:
+      name: LTR390 UVI
+    light:
+      name: LTR390 Light
+    ambient_light:
+      name: LTR390 ALS
+    gain: X3
+    resolution: 18
+    window_correction_factor: 1.0
+    address: 0x53
+    update_interval: 60s

tests/components/ltr390/test.esp32-c3.yaml

@@ -0,0 +1,20 @@
+i2c:
+  - id: i2c_ltr390
+    scl: 5
+    sda: 4
+
+sensor:
+  - platform: ltr390
+    uv:
+      name: LTR390 UV
+    uv_index:
+      name: LTR390 UVI
+    light:
+      name: LTR390 Light
+    ambient_light:
+      name: LTR390 ALS
+    gain: X3
+    resolution: 18
+    window_correction_factor: 1.0
+    address: 0x53
+    update_interval: 60s

tests/components/ltr390/test.esp32-idf.yaml

@@ -0,0 +1,20 @@
+i2c:
+  - id: i2c_ltr390
+    scl: 16
+    sda: 17
+
+sensor:
+  - platform: ltr390
+    uv:
+      name: LTR390 UV
+    uv_index:
+      name: LTR390 UVI
+    light:
+      name: LTR390 Light
+    ambient_light:
+      name: LTR390 ALS
+    gain: X3
+    resolution: 18
+    window_correction_factor: 1.0
+    address: 0x53
+    update_interval: 60s

tests/components/ltr390/test.esp32.yaml

@@ -0,0 +1,20 @@
+i2c:
+  - id: i2c_ltr390
+    scl: 16
+    sda: 17
+
+sensor:
+  - platform: ltr390
+    uv:
+      name: LTR390 UV
+    uv_index:
+      name: LTR390 UVI
+    light:
+      name: LTR390 Light
+    ambient_light:
+      name: LTR390 ALS
+    gain: X3
+    resolution: 18
+    window_correction_factor: 1.0
+    address: 0x53
+    update_interval: 60s

tests/components/ltr390/test.esp8266.yaml

@@ -0,0 +1,20 @@
+i2c:
+  - id: i2c_ltr390
+    scl: 5
+    sda: 4
+
+sensor:
+  - platform: ltr390
+    uv:
+      name: LTR390 UV
+    uv_index:
+      name: LTR390 UVI
+    light:
+      name: LTR390 Light
+    ambient_light:
+      name: LTR390 ALS
+    gain: X3
+    resolution: 18
+    window_correction_factor: 1.0
+    address: 0x53
+    update_interval: 60s

tests/components/ltr390/test.rp2040.yaml

@@ -0,0 +1,20 @@
+i2c:
+  - id: i2c_ltr390
+    scl: 5
+    sda: 4
+
+sensor:
+  - platform: ltr390
+    uv:
+      name: LTR390 UV
+    uv_index:
+      name: LTR390 UVI
+    light:
+      name: LTR390 Light
+    ambient_light:
+      name: LTR390 ALS
+    gain: X3
+    resolution: 18
+    window_correction_factor: 1.0
+    address: 0x53
+    update_interval: 60s