Sprinkler "v2" updates (#4159)

* Add standby switch

* Add support for arbitrary run duration in start_single_valve action

* Add divider feature

* Allow zero multiplier

* Fixes for #3740, misc. cleanup and polishing

* Integrate number components for multiplier, repeat and run duration

* Add various methods to get time remaining

* Add next_prev_ignore_disabled flag

* Optimize next/previous valve selection methods

* Add numbers_use_minutes flag

* Initialize switch states as they are set up

* Ensure SprinklerControllerSwitch has state if it's not restored

* Add repeat validation

* Misc. clean-up and tweaking

* Fix bugprone-integer-division

* More clean-up

* Set entity_category for standby_switch

* Set default entity_category for numbers

* More housekeeping

* Add run request tracking

* Fix time remaining calculation

* Use native unit_of_measurement for run duration numbers

* Unstack some ifs

esphome/components/sprinkler/__init__.py

@@ -2,23 +2,36 @@ import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome import automation
 from esphome.automation import maybe_simple_id
+from esphome.components import number
 from esphome.components import switch
 from esphome.const import (
+    CONF_ENTITY_CATEGORY,
     CONF_ID,
+    CONF_INITIAL_VALUE,
+    CONF_MAX_VALUE,
+    CONF_MIN_VALUE,
     CONF_NAME,
     CONF_REPEAT,
+    CONF_RESTORE_VALUE,
     CONF_RUN_DURATION,
+    CONF_STEP,
+    CONF_UNIT_OF_MEASUREMENT,
     ENTITY_CATEGORY_CONFIG,
+    UNIT_MINUTE,
+    UNIT_SECOND,
 )
 
-AUTO_LOAD = ["switch"]
+AUTO_LOAD = ["number", "switch"]
 CODEOWNERS = ["@kbx81"]
 
 CONF_AUTO_ADVANCE_SWITCH = "auto_advance_switch"
+CONF_DIVIDER = "divider"
 CONF_ENABLE_SWITCH = "enable_switch"
 CONF_MAIN_SWITCH = "main_switch"
 CONF_MANUAL_SELECTION_DELAY = "manual_selection_delay"
 CONF_MULTIPLIER = "multiplier"
+CONF_MULTIPLIER_NUMBER = "multiplier_number"
+CONF_NEXT_PREV_IGNORE_DISABLED = "next_prev_ignore_disabled"
 CONF_PUMP_OFF_SWITCH_ID = "pump_off_switch_id"
 CONF_PUMP_ON_SWITCH_ID = "pump_on_switch_id"
 CONF_PUMP_PULSE_DURATION = "pump_pulse_duration"
@@ -30,7 +43,11 @@ CONF_PUMP_SWITCH = "pump_switch"
 CONF_PUMP_SWITCH_ID = "pump_switch_id"
 CONF_PUMP_SWITCH_OFF_DURING_VALVE_OPEN_DELAY = "pump_switch_off_during_valve_open_delay"
 CONF_QUEUE_ENABLE_SWITCH = "queue_enable_switch"
+CONF_REPEAT_NUMBER = "repeat_number"
 CONF_REVERSE_SWITCH = "reverse_switch"
+CONF_RUN_DURATION_NUMBER = "run_duration_number"
+CONF_SET_ACTION = "set_action"
+CONF_STANDBY_SWITCH = "standby_switch"
 CONF_VALVE_NUMBER = "valve_number"
 CONF_VALVE_OPEN_DELAY = "valve_open_delay"
 CONF_VALVE_OVERLAP = "valve_overlap"
@@ -43,10 +60,14 @@ CONF_VALVES = "valves"
 
 sprinkler_ns = cg.esphome_ns.namespace("sprinkler")
 Sprinkler = sprinkler_ns.class_("Sprinkler", cg.Component)
+SprinklerControllerNumber = sprinkler_ns.class_(
+    "SprinklerControllerNumber", number.Number, cg.Component
+)
 SprinklerControllerSwitch = sprinkler_ns.class_(
     "SprinklerControllerSwitch", switch.Switch, cg.Component
 )
 
+SetDividerAction = sprinkler_ns.class_("SetDividerAction", automation.Action)
 SetMultiplierAction = sprinkler_ns.class_("SetMultiplierAction", automation.Action)
 QueueValveAction = sprinkler_ns.class_("QueueValveAction", automation.Action)
 ClearQueuedValvesAction = sprinkler_ns.class_(
@@ -67,6 +88,19 @@ ResumeAction = sprinkler_ns.class_("ResumeAction", automation.Action)
 ResumeOrStartAction = sprinkler_ns.class_("ResumeOrStartAction", automation.Action)
 
 
+def validate_min_max(config):
+    if config[CONF_MAX_VALUE] <= config[CONF_MIN_VALUE]:
+        raise cv.Invalid(f"{CONF_MAX_VALUE} must be greater than {CONF_MIN_VALUE}")
+
+    if (config[CONF_INITIAL_VALUE] > config[CONF_MAX_VALUE]) or (
+        config[CONF_INITIAL_VALUE] < config[CONF_MIN_VALUE]
+    ):
+        raise cv.Invalid(
+            f"{CONF_INITIAL_VALUE} must be a value between {CONF_MAX_VALUE} and {CONF_MIN_VALUE}"
+        )
+    return config
+
+
 def validate_sprinkler(config):
     for sprinkler_controller_index, sprinkler_controller in enumerate(config):
         if len(sprinkler_controller[CONF_VALVES]) <= 1:
@@ -104,9 +138,18 @@ def validate_sprinkler(config):
                     f"{CONF_VALVE_OPEN_DELAY} must be defined when {CONF_PUMP_SWITCH_OFF_DURING_VALVE_OPEN_DELAY} is enabled"
                 )
 
+        if (
+            CONF_REPEAT in sprinkler_controller
+            and CONF_REPEAT_NUMBER in sprinkler_controller
+        ):
+            raise cv.Invalid(
+                f"Do not specify {CONF_REPEAT} when using {CONF_REPEAT_NUMBER}; use number component's {CONF_INITIAL_VALUE} instead"
+            )
+
         for valve in sprinkler_controller[CONF_VALVES]:
             if (
                 CONF_VALVE_OVERLAP in sprinkler_controller
+                and CONF_RUN_DURATION in valve
                 and valve[CONF_RUN_DURATION] <= sprinkler_controller[CONF_VALVE_OVERLAP]
             ):
                 raise cv.Invalid(
@@ -114,6 +157,7 @@ def validate_sprinkler(config):
                 )
             if (
                 CONF_VALVE_OPEN_DELAY in sprinkler_controller
+                and CONF_RUN_DURATION in valve
                 and valve[CONF_RUN_DURATION]
                 <= sprinkler_controller[CONF_VALVE_OPEN_DELAY]
             ):
@@ -170,6 +214,14 @@ def validate_sprinkler(config):
                 raise cv.Invalid(
                     f"Either {CONF_VALVE_SWITCH_ID} or {CONF_VALVE_OFF_SWITCH_ID} and {CONF_VALVE_ON_SWITCH_ID} must be specified in valve configuration"
                 )
+            if CONF_RUN_DURATION not in valve and CONF_RUN_DURATION_NUMBER not in valve:
+                raise cv.Invalid(
+                    f"Either {CONF_RUN_DURATION} or {CONF_RUN_DURATION_NUMBER} must be specified for each valve"
+                )
+            if CONF_RUN_DURATION in valve and CONF_RUN_DURATION_NUMBER in valve:
+                raise cv.Invalid(
+                    f"Do not specify {CONF_RUN_DURATION} when using {CONF_RUN_DURATION_NUMBER}; use number component's {CONF_INITIAL_VALUE} instead"
+                )
     return config
 
 
@@ -190,11 +242,20 @@ SPRINKLER_ACTION_REPEAT_SCHEMA = cv.maybe_simple_value(
 SPRINKLER_ACTION_SINGLE_VALVE_SCHEMA = cv.maybe_simple_value(
     {
         cv.GenerateID(): cv.use_id(Sprinkler),
+        cv.Optional(CONF_RUN_DURATION): cv.templatable(cv.positive_time_period_seconds),
         cv.Required(CONF_VALVE_NUMBER): cv.templatable(cv.positive_int),
     },
     key=CONF_VALVE_NUMBER,
 )
 
+SPRINKLER_ACTION_SET_DIVIDER_SCHEMA = cv.maybe_simple_value(
+    {
+        cv.GenerateID(): cv.use_id(Sprinkler),
+        cv.Required(CONF_DIVIDER): cv.templatable(cv.positive_int),
+    },
+    key=CONF_DIVIDER,
+)
+
 SPRINKLER_ACTION_SET_MULTIPLIER_SCHEMA = cv.maybe_simple_value(
     {
         cv.GenerateID(): cv.use_id(Sprinkler),
@@ -232,7 +293,30 @@ SPRINKLER_VALVE_SCHEMA = cv.Schema(
         cv.Optional(CONF_PUMP_OFF_SWITCH_ID): cv.use_id(switch.Switch),
         cv.Optional(CONF_PUMP_ON_SWITCH_ID): cv.use_id(switch.Switch),
         cv.Optional(CONF_PUMP_SWITCH_ID): cv.use_id(switch.Switch),
-        cv.Required(CONF_RUN_DURATION): cv.positive_time_period_seconds,
+        cv.Optional(CONF_RUN_DURATION): cv.positive_time_period_seconds,
+        cv.Optional(CONF_RUN_DURATION_NUMBER): cv.maybe_simple_value(
+            number.NUMBER_SCHEMA.extend(
+                {
+                    cv.GenerateID(): cv.declare_id(SprinklerControllerNumber),
+                    cv.Optional(
+                        CONF_ENTITY_CATEGORY, default=ENTITY_CATEGORY_CONFIG
+                    ): cv.entity_category,
+                    cv.Optional(CONF_INITIAL_VALUE, default=900): cv.positive_int,
+                    cv.Optional(CONF_MAX_VALUE, default=86400): cv.positive_int,
+                    cv.Optional(CONF_MIN_VALUE, default=1): cv.positive_int,
+                    cv.Optional(CONF_RESTORE_VALUE, default=True): cv.boolean,
+                    cv.Optional(CONF_STEP, default=1): cv.positive_int,
+                    cv.Optional(CONF_SET_ACTION): automation.validate_automation(
+                        single=True
+                    ),
+                    cv.Optional(
+                        CONF_UNIT_OF_MEASUREMENT, default=UNIT_SECOND
+                    ): cv.one_of(UNIT_MINUTE, UNIT_SECOND, lower="True"),
+                }
+            ).extend(cv.COMPONENT_SCHEMA),
+            validate_min_max,
+            key=CONF_NAME,
+        ),
         cv.Required(CONF_VALVE_SWITCH): cv.maybe_simple_value(
             switch.switch_schema(SprinklerControllerSwitch),
             key=CONF_NAME,
@@ -268,8 +352,55 @@ SPRINKLER_CONTROLLER_SCHEMA = cv.Schema(
             ),
             key=CONF_NAME,
         ),
+        cv.Optional(CONF_STANDBY_SWITCH): cv.maybe_simple_value(
+            switch.switch_schema(
+                SprinklerControllerSwitch, entity_category=ENTITY_CATEGORY_CONFIG
+            ),
+            key=CONF_NAME,
+        ),
+        cv.Optional(CONF_NEXT_PREV_IGNORE_DISABLED, default=False): cv.boolean,
         cv.Optional(CONF_MANUAL_SELECTION_DELAY): cv.positive_time_period_seconds,
+        cv.Optional(CONF_MULTIPLIER_NUMBER): cv.maybe_simple_value(
+            number.NUMBER_SCHEMA.extend(
+                {
+                    cv.GenerateID(): cv.declare_id(SprinklerControllerNumber),
+                    cv.Optional(
+                        CONF_ENTITY_CATEGORY, default=ENTITY_CATEGORY_CONFIG
+                    ): cv.entity_category,
+                    cv.Optional(CONF_INITIAL_VALUE, default=1): cv.positive_float,
+                    cv.Optional(CONF_MAX_VALUE, default=10): cv.positive_float,
+                    cv.Optional(CONF_MIN_VALUE, default=0): cv.positive_float,
+                    cv.Optional(CONF_RESTORE_VALUE, default=True): cv.boolean,
+                    cv.Optional(CONF_STEP, default=0.1): cv.positive_float,
+                    cv.Optional(CONF_SET_ACTION): automation.validate_automation(
+                        single=True
+                    ),
+                }
+            ).extend(cv.COMPONENT_SCHEMA),
+            validate_min_max,
+            key=CONF_NAME,
+        ),
         cv.Optional(CONF_REPEAT): cv.positive_int,
+        cv.Optional(CONF_REPEAT_NUMBER): cv.maybe_simple_value(
+            number.NUMBER_SCHEMA.extend(
+                {
+                    cv.GenerateID(): cv.declare_id(SprinklerControllerNumber),
+                    cv.Optional(
+                        CONF_ENTITY_CATEGORY, default=ENTITY_CATEGORY_CONFIG
+                    ): cv.entity_category,
+                    cv.Optional(CONF_INITIAL_VALUE, default=0): cv.positive_int,
+                    cv.Optional(CONF_MAX_VALUE, default=10): cv.positive_int,
+                    cv.Optional(CONF_MIN_VALUE, default=0): cv.positive_int,
+                    cv.Optional(CONF_RESTORE_VALUE, default=True): cv.boolean,
+                    cv.Optional(CONF_STEP, default=1): cv.positive_int,
+                    cv.Optional(CONF_SET_ACTION): automation.validate_automation(
+                        single=True
+                    ),
+                }
+            ).extend(cv.COMPONENT_SCHEMA),
+            validate_min_max,
+            key=CONF_NAME,
+        ),
         cv.Optional(CONF_PUMP_PULSE_DURATION): cv.positive_time_period_milliseconds,
         cv.Optional(CONF_VALVE_PULSE_DURATION): cv.positive_time_period_milliseconds,
         cv.Exclusive(
@@ -301,6 +432,19 @@ CONFIG_SCHEMA = cv.All(
 )
 
 
+@automation.register_action(
+    "sprinkler.set_divider",
+    SetDividerAction,
+    SPRINKLER_ACTION_SET_DIVIDER_SCHEMA,
+)
+async def sprinkler_set_divider_to_code(config, action_id, template_arg, args):
+    paren = await cg.get_variable(config[CONF_ID])
+    var = cg.new_Pvariable(action_id, template_arg, paren)
+    template_ = await cg.templatable(config[CONF_DIVIDER], args, cg.float_)
+    cg.add(var.set_divider(template_))
+    return var
+
+
 @automation.register_action(
     "sprinkler.set_multiplier",
     SetMultiplierAction,
@@ -385,6 +529,9 @@ async def sprinkler_start_single_valve_to_code(config, action_id, template_arg,
     var = cg.new_Pvariable(action_id, template_arg, paren)
     template_ = await cg.templatable(config[CONF_VALVE_NUMBER], args, cg.uint8)
     cg.add(var.set_valve_to_start(template_))
+    if CONF_RUN_DURATION in config:
+        template_ = await cg.templatable(config[CONF_RUN_DURATION], args, cg.uint32)
+        cg.add(var.set_valve_run_duration(template_))
     return var
 
 
@@ -455,6 +602,79 @@ async def to_code(config):
                 )
                 cg.add(var.set_controller_reverse_switch(sw_rev_var))
 
+            if CONF_STANDBY_SWITCH in sprinkler_controller:
+                sw_stb_var = await switch.new_switch(
+                    sprinkler_controller[CONF_STANDBY_SWITCH]
+                )
+                await cg.register_component(
+                    sw_stb_var, sprinkler_controller[CONF_STANDBY_SWITCH]
+                )
+                cg.add(var.set_controller_standby_switch(sw_stb_var))
+
+            if CONF_MULTIPLIER_NUMBER in sprinkler_controller:
+                num_mult_var = await number.new_number(
+                    sprinkler_controller[CONF_MULTIPLIER_NUMBER],
+                    min_value=sprinkler_controller[CONF_MULTIPLIER_NUMBER][
+                        CONF_MIN_VALUE
+                    ],
+                    max_value=sprinkler_controller[CONF_MULTIPLIER_NUMBER][
+                        CONF_MAX_VALUE
+                    ],
+                    step=sprinkler_controller[CONF_MULTIPLIER_NUMBER][CONF_STEP],
+                )
+                await cg.register_component(
+                    num_mult_var, sprinkler_controller[CONF_MULTIPLIER_NUMBER]
+                )
+                cg.add(
+                    num_mult_var.set_initial_value(
+                        sprinkler_controller[CONF_MULTIPLIER_NUMBER][CONF_INITIAL_VALUE]
+                    )
+                )
+                cg.add(
+                    num_mult_var.set_restore_value(
+                        sprinkler_controller[CONF_MULTIPLIER_NUMBER][CONF_RESTORE_VALUE]
+                    )
+                )
+
+                if CONF_SET_ACTION in sprinkler_controller[CONF_MULTIPLIER_NUMBER]:
+                    await automation.build_automation(
+                        num_mult_var.get_set_trigger(),
+                        [(float, "x")],
+                        sprinkler_controller[CONF_MULTIPLIER_NUMBER][CONF_SET_ACTION],
+                    )
+
+                cg.add(var.set_controller_multiplier_number(num_mult_var))
+
+            if CONF_REPEAT_NUMBER in sprinkler_controller:
+                num_repeat_var = await number.new_number(
+                    sprinkler_controller[CONF_REPEAT_NUMBER],
+                    min_value=sprinkler_controller[CONF_REPEAT_NUMBER][CONF_MIN_VALUE],
+                    max_value=sprinkler_controller[CONF_REPEAT_NUMBER][CONF_MAX_VALUE],
+                    step=sprinkler_controller[CONF_REPEAT_NUMBER][CONF_STEP],
+                )
+                await cg.register_component(
+                    num_repeat_var, sprinkler_controller[CONF_REPEAT_NUMBER]
+                )
+                cg.add(
+                    num_repeat_var.set_initial_value(
+                        sprinkler_controller[CONF_REPEAT_NUMBER][CONF_INITIAL_VALUE]
+                    )
+                )
+                cg.add(
+                    num_repeat_var.set_restore_value(
+                        sprinkler_controller[CONF_REPEAT_NUMBER][CONF_RESTORE_VALUE]
+                    )
+                )
+
+                if CONF_SET_ACTION in sprinkler_controller[CONF_REPEAT_NUMBER]:
+                    await automation.build_automation(
+                        num_repeat_var.get_set_trigger(),
+                        [(float, "x")],
+                        sprinkler_controller[CONF_REPEAT_NUMBER][CONF_SET_ACTION],
+                    )
+
+                cg.add(var.set_controller_repeat_number(num_repeat_var))
+
         for valve in sprinkler_controller[CONF_VALVES]:
             sw_valve_var = await switch.new_switch(valve[CONF_VALVE_SWITCH])
             await cg.register_component(sw_valve_var, valve[CONF_VALVE_SWITCH])
@@ -470,6 +690,12 @@ async def to_code(config):
             else:
                 cg.add(var.add_valve(sw_valve_var))
 
+        cg.add(
+            var.set_next_prev_ignore_disabled_valves(
+                sprinkler_controller[CONF_NEXT_PREV_IGNORE_DISABLED]
+            )
+        )
+
         if CONF_MANUAL_SELECTION_DELAY in sprinkler_controller:
             cg.add(
                 var.set_manual_selection_delay(
@@ -524,6 +750,11 @@ async def to_code(config):
     for sprinkler_controller in config:
         var = await cg.get_variable(sprinkler_controller[CONF_ID])
         for valve_index, valve in enumerate(sprinkler_controller[CONF_VALVES]):
+            if CONF_RUN_DURATION not in valve:
+                valve[CONF_RUN_DURATION] = valve[CONF_RUN_DURATION_NUMBER][
+                    CONF_INITIAL_VALUE
+                ]
+
             if CONF_VALVE_SWITCH_ID in valve:
                 valve_switch = await cg.get_variable(valve[CONF_VALVE_SWITCH_ID])
                 cg.add(
@@ -561,6 +792,35 @@ async def to_code(config):
                     )
                 )
 
+            if CONF_RUN_DURATION_NUMBER in valve:
+                num_rd_var = await number.new_number(
+                    valve[CONF_RUN_DURATION_NUMBER],
+                    min_value=valve[CONF_RUN_DURATION_NUMBER][CONF_MIN_VALUE],
+                    max_value=valve[CONF_RUN_DURATION_NUMBER][CONF_MAX_VALUE],
+                    step=valve[CONF_RUN_DURATION_NUMBER][CONF_STEP],
+                )
+                await cg.register_component(num_rd_var, valve[CONF_RUN_DURATION_NUMBER])
+
+                cg.add(
+                    num_rd_var.set_initial_value(
+                        valve[CONF_RUN_DURATION_NUMBER][CONF_INITIAL_VALUE]
+                    )
+                )
+                cg.add(
+                    num_rd_var.set_restore_value(
+                        valve[CONF_RUN_DURATION_NUMBER][CONF_RESTORE_VALUE]
+                    )
+                )
+
+                if CONF_SET_ACTION in valve[CONF_RUN_DURATION_NUMBER]:
+                    await automation.build_automation(
+                        num_rd_var.get_set_trigger(),
+                        [(float, "x")],
+                        valve[CONF_RUN_DURATION_NUMBER][CONF_SET_ACTION],
+                    )
+
+                cg.add(var.configure_valve_run_duration_number(valve_index, num_rd_var))
+
     for sprinkler_controller in config:
         var = await cg.get_variable(sprinkler_controller[CONF_ID])
         for controller_to_add in config:

esphome/components/sprinkler/automation.h

@@ -7,6 +7,18 @@
 namespace esphome {
 namespace sprinkler {
 
+template<typename... Ts> class SetDividerAction : public Action<Ts...> {
+ public:
+  explicit SetDividerAction(Sprinkler *a_sprinkler) : sprinkler_(a_sprinkler) {}
+
+  TEMPLATABLE_VALUE(uint32_t, divider)
+
+  void play(Ts... x) override { this->sprinkler_->set_divider(this->divider_.optional_value(x...)); }
+
+ protected:
+  Sprinkler *sprinkler_;
+};
+
 template<typename... Ts> class SetMultiplierAction : public Action<Ts...> {
  public:
   explicit SetMultiplierAction(Sprinkler *a_sprinkler) : sprinkler_(a_sprinkler) {}
@@ -98,8 +110,12 @@ template<typename... Ts> class StartSingleValveAction : public Action<Ts...> {
   explicit StartSingleValveAction(Sprinkler *a_sprinkler) : sprinkler_(a_sprinkler) {}
 
   TEMPLATABLE_VALUE(size_t, valve_to_start)
+  TEMPLATABLE_VALUE(uint32_t, valve_run_duration)
 
-  void play(Ts... x) override { this->sprinkler_->start_single_valve(this->valve_to_start_.optional_value(x...)); }
+  void play(Ts... x) override {
+    this->sprinkler_->start_single_valve(this->valve_to_start_.optional_value(x...),
+                                         this->valve_run_duration_.optional_value(x...));
+  }
 
  protected:
   Sprinkler *sprinkler_;

esphome/components/sprinkler/sprinkler.cpp

@@ -75,6 +75,34 @@ void SprinklerSwitch::sync_valve_state(bool latch_state) {
   }
 }
 
+void SprinklerControllerNumber::setup() {
+  float value;
+  if (!this->restore_value_) {
+    value = this->initial_value_;
+  } else {
+    this->pref_ = global_preferences->make_preference<float>(this->get_object_id_hash());
+    if (!this->pref_.load(&value)) {
+      if (!std::isnan(this->initial_value_)) {
+        value = this->initial_value_;
+      } else {
+        value = this->traits.get_min_value();
+      }
+    }
+  }
+  this->publish_state(value);
+}
+
+void SprinklerControllerNumber::control(float value) {
+  this->set_trigger_->trigger(value);
+
+  this->publish_state(value);
+
+  if (this->restore_value_)
+    this->pref_.save(&value);
+}
+
+void SprinklerControllerNumber::dump_config() { LOG_NUMBER("", "Sprinkler Controller Number", this); }
+
 SprinklerControllerSwitch::SprinklerControllerSwitch()
     : turn_on_trigger_(new Trigger<>()), turn_off_trigger_(new Trigger<>()) {}
 
@@ -101,12 +129,9 @@ void SprinklerControllerSwitch::write_state(bool state) {
     this->turn_off_trigger_->trigger();
   }
 
-  if (this->optimistic_)
   this->publish_state(state);
 }
 
-void SprinklerControllerSwitch::set_optimistic(bool optimistic) { this->optimistic_ = optimistic; }
-bool SprinklerControllerSwitch::assumed_state() { return this->assumed_state_; }
 void SprinklerControllerSwitch::set_state_lambda(std::function<optional<bool>()> &&f) { this->f_ = f; }
 float SprinklerControllerSwitch::get_setup_priority() const { return setup_priority::HARDWARE; }
 
@@ -114,30 +139,16 @@ Trigger<> *SprinklerControllerSwitch::get_turn_on_trigger() const { return this-
 Trigger<> *SprinklerControllerSwitch::get_turn_off_trigger() const { return this->turn_off_trigger_; }
 
 void SprinklerControllerSwitch::setup() {
-  if (!this->restore_state_)
+  this->state = this->get_initial_state_with_restore_mode().value_or(false);
-    return;
 
-  auto restored = this->get_initial_state();
+  if (this->state) {
-  if (!restored.has_value())
-    return;
-
-  ESP_LOGD(TAG, "  Restored state %s", ONOFF(*restored));
-  if (*restored) {
     this->turn_on();
   } else {
     this->turn_off();
   }
 }
 
-void SprinklerControllerSwitch::dump_config() {
+void SprinklerControllerSwitch::dump_config() { LOG_SWITCH("", "Sprinkler Switch", this); }
-  LOG_SWITCH("", "Sprinkler Switch", this);
-  ESP_LOGCONFIG(TAG, "  Restore State: %s", YESNO(this->restore_state_));
-  ESP_LOGCONFIG(TAG, "  Optimistic: %s", YESNO(this->optimistic_));
-}
-
-void SprinklerControllerSwitch::set_restore_state(bool restore_state) { this->restore_state_ = restore_state; }
-
-void SprinklerControllerSwitch::set_assumed_state(bool assumed_state) { this->assumed_state_ = assumed_state; }
 
 SprinklerValveOperator::SprinklerValveOperator() {}
 SprinklerValveOperator::SprinklerValveOperator(SprinklerValve *valve, Sprinkler *controller)
@@ -328,6 +339,8 @@ SprinklerValveRunRequest::SprinklerValveRunRequest(size_t valve_number, uint32_t
 bool SprinklerValveRunRequest::has_request() { return this->has_valve_; }
 bool SprinklerValveRunRequest::has_valve_operator() { return !(this->valve_op_ == nullptr); }
 
+void SprinklerValveRunRequest::set_request_from(SprinklerValveRunRequestOrigin origin) { this->origin_ = origin; }
+
 void SprinklerValveRunRequest::set_run_duration(uint32_t run_duration) { this->run_duration_ = run_duration; }
 
 void SprinklerValveRunRequest::set_valve(size_t valve_number) {
@@ -345,6 +358,7 @@ void SprinklerValveRunRequest::set_valve_operator(SprinklerValveOperator *valve_
 
 void SprinklerValveRunRequest::reset() {
   this->has_valve_ = false;
+  this->origin_ = USER;
   this->run_duration_ = 0;
   this->valve_op_ = nullptr;
 }
@@ -362,6 +376,8 @@ optional<size_t> SprinklerValveRunRequest::valve_as_opt() {
 
 SprinklerValveOperator *SprinklerValveRunRequest::valve_operator() { return this->valve_op_; }
 
+SprinklerValveRunRequestOrigin SprinklerValveRunRequest::request_is_from() { return this->origin_; }
+
 Sprinkler::Sprinkler() {}
 Sprinkler::Sprinkler(const std::string &name) : EntityBase(name) {}
 
@@ -404,8 +420,6 @@ void Sprinkler::add_valve(SprinklerControllerSwitch *valve_sw, SprinklerControll
 
   if (enable_sw != nullptr) {
     new_valve->enable_switch = enable_sw;
-    new_valve->enable_switch->set_optimistic(true);
-    new_valve->enable_switch->set_restore_state(true);
   }
 }
 
@@ -433,26 +447,37 @@ void Sprinkler::set_controller_main_switch(SprinklerControllerSwitch *controller
 
 void Sprinkler::set_controller_auto_adv_switch(SprinklerControllerSwitch *auto_adv_switch) {
   this->auto_adv_sw_ = auto_adv_switch;
-  auto_adv_switch->set_optimistic(true);
-  auto_adv_switch->set_restore_state(true);
 }
 
 void Sprinkler::set_controller_queue_enable_switch(SprinklerControllerSwitch *queue_enable_switch) {
   this->queue_enable_sw_ = queue_enable_switch;
-  queue_enable_switch->set_optimistic(true);
-  queue_enable_switch->set_restore_state(true);
 }
 
 void Sprinkler::set_controller_reverse_switch(SprinklerControllerSwitch *reverse_switch) {
   this->reverse_sw_ = reverse_switch;
-  reverse_switch->set_optimistic(true);
+}
-  reverse_switch->set_restore_state(true);
+
+void Sprinkler::set_controller_standby_switch(SprinklerControllerSwitch *standby_switch) {
+  this->standby_sw_ = standby_switch;
+
+  this->sprinkler_standby_turn_on_automation_ = make_unique<Automation<>>(standby_switch->get_turn_on_trigger());
+  this->sprinkler_standby_shutdown_action_ = make_unique<sprinkler::ShutdownAction<>>(this);
+  this->sprinkler_standby_turn_on_automation_->add_actions({sprinkler_standby_shutdown_action_.get()});
+}
+
+void Sprinkler::set_controller_multiplier_number(SprinklerControllerNumber *multiplier_number) {
+  this->multiplier_number_ = multiplier_number;
+}
+
+void Sprinkler::set_controller_repeat_number(SprinklerControllerNumber *repeat_number) {
+  this->repeat_number_ = repeat_number;
 }
 
 void Sprinkler::configure_valve_switch(size_t valve_number, switch_::Switch *valve_switch, uint32_t run_duration) {
   if (this->is_a_valid_valve(valve_number)) {
     this->valve_[valve_number].valve_switch.set_on_switch(valve_switch);
     this->valve_[valve_number].run_duration = run_duration;
+    valve_switch->turn_off();
   }
 }
 
@@ -464,6 +489,8 @@ void Sprinkler::configure_valve_switch_pulsed(size_t valve_number, switch_::Swit
     this->valve_[valve_number].valve_switch.set_on_switch(valve_switch_on);
     this->valve_[valve_number].valve_switch.set_pulse_duration(pulse_duration);
     this->valve_[valve_number].run_duration = run_duration;
+    valve_switch_off->turn_off();
+    valve_switch_on->turn_off();
   }
 }
 
@@ -478,6 +505,7 @@ void Sprinkler::configure_valve_pump_switch(size_t valve_number, switch_::Switch
     this->pump_.resize(this->pump_.size() + 1);
     this->pump_.back().set_on_switch(pump_switch);
     this->valve_[valve_number].pump_switch_index = this->pump_.size() - 1;  // save the index to the new pump
+    pump_switch->turn_off();
   }
 }
 
@@ -496,15 +524,49 @@ void Sprinkler::configure_valve_pump_switch_pulsed(size_t valve_number, switch_:
     this->pump_.back().set_on_switch(pump_switch_on);
     this->pump_.back().set_pulse_duration(pulse_duration);
     this->valve_[valve_number].pump_switch_index = this->pump_.size() - 1;  // save the index to the new pump
+    pump_switch_off->turn_off();
+    pump_switch_on->turn_off();
+  }
+}
+
+void Sprinkler::configure_valve_run_duration_number(size_t valve_number,
+                                                    SprinklerControllerNumber *run_duration_number) {
+  if (this->is_a_valid_valve(valve_number)) {
+    this->valve_[valve_number].run_duration_number = run_duration_number;
+  }
+}
+
+void Sprinkler::set_divider(optional<uint32_t> divider) {
+  if (!divider.has_value()) {
+    return;
+  }
+  if (divider.value() > 0) {
+    this->set_multiplier(1.0 / divider.value());
+    this->set_repeat(divider.value() - 1);
+  } else if (divider.value() == 0) {
+    this->set_multiplier(1.0);
+    this->set_repeat(0);
   }
 }
 
 void Sprinkler::set_multiplier(const optional<float> multiplier) {
-  if (multiplier.has_value()) {
+  if ((!multiplier.has_value()) || (multiplier.value() < 0)) {
-    if (multiplier.value() > 0) {
+    return;
+  }
   this->multiplier_ = multiplier.value();
+  if (this->multiplier_number_ == nullptr) {
+    return;
   }
+  if (this->multiplier_number_->state == multiplier.value()) {
+    return;
   }
+  auto call = this->multiplier_number_->make_call();
+  call.set_value(multiplier.value());
+  call.perform();
+}
+
+void Sprinkler::set_next_prev_ignore_disabled_valves(bool ignore_disabled) {
+  this->next_prev_ignore_disabled_ = ignore_disabled;
 }
 
 void Sprinkler::set_pump_start_delay(uint32_t start_delay) {
@@ -559,47 +621,118 @@ void Sprinkler::set_manual_selection_delay(uint32_t manual_selection_delay) {
 }
 
 void Sprinkler::set_valve_run_duration(const optional<size_t> valve_number, const optional<uint32_t> run_duration) {
-  if (valve_number.has_value() && run_duration.has_value()) {
+  if (!valve_number.has_value() || !run_duration.has_value()) {
-    if (this->is_a_valid_valve(valve_number.value())) {
+    return;
+  }
+  if (!this->is_a_valid_valve(valve_number.value())) {
+    return;
+  }
   this->valve_[valve_number.value()].run_duration = run_duration.value();
+  if (this->valve_[valve_number.value()].run_duration_number == nullptr) {
+    return;
   }
+  if (this->valve_[valve_number.value()].run_duration_number->state == run_duration.value()) {
+    return;
   }
+  auto call = this->valve_[valve_number.value()].run_duration_number->make_call();
+  if (this->valve_[valve_number.value()].run_duration_number->traits.get_unit_of_measurement() == min_str) {
+    call.set_value(run_duration.value() / 60.0);
+  } else {
+    call.set_value(run_duration.value());
+  }
+  call.perform();
 }
 
 void Sprinkler::set_auto_advance(const bool auto_advance) {
-  if (this->auto_adv_sw_ != nullptr) {
+  if (this->auto_adv_sw_ == nullptr) {
-    this->auto_adv_sw_->publish_state(auto_advance);
+    return;
+  }
+  if (this->auto_adv_sw_->state == auto_advance) {
+    return;
+  }
+  if (auto_advance) {
+    this->auto_adv_sw_->turn_on();
+  } else {
+    this->auto_adv_sw_->turn_off();
   }
 }
 
-void Sprinkler::set_repeat(optional<uint32_t> repeat) { this->target_repeats_ = repeat; }
+void Sprinkler::set_repeat(optional<uint32_t> repeat) {
+  this->target_repeats_ = repeat;
+  if (this->repeat_number_ == nullptr) {
+    return;
+  }
+  if (this->repeat_number_->state == repeat.value()) {
+    return;
+  }
+  auto call = this->repeat_number_->make_call();
+  call.set_value(repeat.value_or(0));
+  call.perform();
+}
 
 void Sprinkler::set_queue_enable(bool queue_enable) {
-  if (this->queue_enable_sw_ != nullptr) {
+  if (this->queue_enable_sw_ == nullptr) {
-    this->queue_enable_sw_->publish_state(queue_enable);
+    return;
+  }
+  if (this->queue_enable_sw_->state == queue_enable) {
+    return;
+  }
+  if (queue_enable) {
+    this->queue_enable_sw_->turn_on();
+  } else {
+    this->queue_enable_sw_->turn_off();
   }
 }
 
 void Sprinkler::set_reverse(const bool reverse) {
-  if (this->reverse_sw_ != nullptr) {
+  if (this->reverse_sw_ == nullptr) {
-    this->reverse_sw_->publish_state(reverse);
+    return;
+  }
+  if (this->reverse_sw_->state == reverse) {
+    return;
+  }
+  if (reverse) {
+    this->reverse_sw_->turn_on();
+  } else {
+    this->reverse_sw_->turn_off();
+  }
+}
+
+void Sprinkler::set_standby(const bool standby) {
+  if (this->standby_sw_ == nullptr) {
+    return;
+  }
+  if (this->standby_sw_->state == standby) {
+    return;
+  }
+  if (standby) {
+    this->standby_sw_->turn_on();
+  } else {
+    this->standby_sw_->turn_off();
   }
 }
 
 uint32_t Sprinkler::valve_run_duration(const size_t valve_number) {
-  if (this->is_a_valid_valve(valve_number)) {
+  if (!this->is_a_valid_valve(valve_number)) {
-    return this->valve_[valve_number].run_duration;
-  }
     return 0;
   }
+  if (this->valve_[valve_number].run_duration_number != nullptr) {
+    if (this->valve_[valve_number].run_duration_number->traits.get_unit_of_measurement() == min_str) {
+      return static_cast<uint32_t>(roundf(this->valve_[valve_number].run_duration_number->state * 60));
+    } else {
+      return static_cast<uint32_t>(roundf(this->valve_[valve_number].run_duration_number->state));
+    }
+  }
+  return this->valve_[valve_number].run_duration;
+}
 
 uint32_t Sprinkler::valve_run_duration_adjusted(const size_t valve_number) {
   uint32_t run_duration = 0;
 
   if (this->is_a_valid_valve(valve_number)) {
-    run_duration = this->valve_[valve_number].run_duration;
+    run_duration = this->valve_run_duration(valve_number);
   }
-  run_duration = static_cast<uint32_t>(roundf(run_duration * this->multiplier_));
+  run_duration = static_cast<uint32_t>(roundf(run_duration * this->multiplier()));
   // run_duration must not be less than any of these
   if ((run_duration < this->start_delay_) || (run_duration < this->stop_delay_) ||
       (run_duration < this->switching_delay_.value_or(0) * 2)) {
@@ -615,17 +748,25 @@ bool Sprinkler::auto_advance() {
   return false;
 }
 
-float Sprinkler::multiplier() { return this->multiplier_; }
+float Sprinkler::multiplier() {
+  if (this->multiplier_number_ != nullptr) {
+    return this->multiplier_number_->state;
+  }
+  return this->multiplier_;
+}
 
-optional<uint32_t> Sprinkler::repeat() { return this->target_repeats_; }
+optional<uint32_t> Sprinkler::repeat() {
+  if (this->repeat_number_ != nullptr) {
+    return static_cast<uint32_t>(roundf(this->repeat_number_->state));
+  }
+  return this->target_repeats_;
+}
 
 optional<uint32_t> Sprinkler::repeat_count() {
   // if there is an active valve and auto-advance is enabled, we may be repeating, so return the count
-  if (this->auto_adv_sw_ != nullptr) {
+  if (this->active_req_.has_request() && this->auto_advance()) {
-    if (this->active_req_.has_request() && this->auto_adv_sw_->state) {
     return this->repeat_count_;
   }
-  }
   return nullopt;
 }
 
@@ -643,7 +784,22 @@ bool Sprinkler::reverse() {
   return false;
 }
 
+bool Sprinkler::standby() {
+  if (this->standby_sw_ != nullptr) {
+    return this->standby_sw_->state;
+  }
+  return false;
+}
+
 void Sprinkler::start_from_queue() {
+  if (this->standby()) {
+    ESP_LOGD(TAG, "start_from_queue called but standby is enabled; no action taken");
+    return;
+  }
+  if (this->multiplier() == 0) {
+    ESP_LOGD(TAG, "start_from_queue called but multiplier is set to zero; no action taken");
+    return;
+  }
   if (this->queued_valves_.empty()) {
     return;  // if there is nothing in the queue, don't do anything
   }
@@ -651,25 +807,29 @@ void Sprinkler::start_from_queue() {
     return;  // if there is already a valve running from the queue, do nothing
   }
 
-  if (this->auto_adv_sw_ != nullptr) {
+  this->set_auto_advance(false);
-    this->auto_adv_sw_->publish_state(false);
+  this->set_queue_enable(true);
-  }
+
-  if (this->queue_enable_sw_ != nullptr) {
-    this->queue_enable_sw_->publish_state(true);
-  }
   this->reset_cycle_states_();  // just in case auto-advance is switched on later
   this->repeat_count_ = 0;
   this->fsm_kick_();  // will automagically pick up from the queue (it has priority)
 }
 
 void Sprinkler::start_full_cycle() {
+  if (this->standby()) {
+    ESP_LOGD(TAG, "start_full_cycle called but standby is enabled; no action taken");
+    return;
+  }
+  if (this->multiplier() == 0) {
+    ESP_LOGD(TAG, "start_full_cycle called but multiplier is set to zero; no action taken");
+    return;
+  }
   if (this->auto_advance() && this->active_valve().has_value()) {
     return;  // if auto-advance is already enabled and there is already a valve running, do nothing
   }
 
-  if (this->queue_enable_sw_ != nullptr) {
+  this->set_queue_enable(false);
-    this->queue_enable_sw_->publish_state(false);
+
-  }
   this->prep_full_cycle_();
   this->repeat_count_ = 0;
   // if there is no active valve already, start the first valve in the cycle
@@ -678,20 +838,25 @@ void Sprinkler::start_full_cycle() {
   }
 }
 
-void Sprinkler::start_single_valve(const optional<size_t> valve_number) {
+void Sprinkler::start_single_valve(const optional<size_t> valve_number, optional<uint32_t> run_duration) {
+  if (this->standby()) {
+    ESP_LOGD(TAG, "start_single_valve called but standby is enabled; no action taken");
+    return;
+  }
+  if (this->multiplier() == 0) {
+    ESP_LOGD(TAG, "start_single_valve called but multiplier is set to zero; no action taken");
+    return;
+  }
   if (!valve_number.has_value() || (valve_number == this->active_valve())) {
     return;
   }
 
-  if (this->auto_adv_sw_ != nullptr) {
+  this->set_auto_advance(false);
-    this->auto_adv_sw_->publish_state(false);
+  this->set_queue_enable(false);
-  }
+
-  if (this->queue_enable_sw_ != nullptr) {
-    this->queue_enable_sw_->publish_state(false);
-  }
   this->reset_cycle_states_();  // just in case auto-advance is switched on later
   this->repeat_count_ = 0;
-  this->fsm_request_(valve_number.value());
+  this->fsm_request_(valve_number.value(), run_duration.value_or(0));
 }
 
 void Sprinkler::queue_valve(optional<size_t> valve_number, optional<uint32_t> run_duration) {
@@ -714,8 +879,17 @@ void Sprinkler::next_valve() {
   if (this->state_ == IDLE) {
     this->reset_cycle_states_();  // just in case auto-advance is switched on later
   }
+
   this->manual_valve_ = this->next_valve_number_(
-      this->manual_valve_.value_or(this->active_req_.valve_as_opt().value_or(this->number_of_valves() - 1)));
+      this->manual_valve_.value_or(this->active_req_.valve_as_opt().value_or(this->number_of_valves() - 1)),
+      !this->next_prev_ignore_disabled_, true);
+
+  if (!this->manual_valve_.has_value()) {
+    ESP_LOGD(TAG, "next_valve was called but no valve could be started; perhaps next_prev_ignore_disabled allows only "
+                  "enabled valves and no valves are enabled?");
+    return;
+  }
+
   if (this->manual_selection_delay_.has_value()) {
     this->set_timer_duration_(sprinkler::TIMER_VALVE_SELECTION, this->manual_selection_delay_.value());
     this->start_timer_(sprinkler::TIMER_VALVE_SELECTION);
@@ -728,8 +902,17 @@ void Sprinkler::previous_valve() {
   if (this->state_ == IDLE) {
     this->reset_cycle_states_();  // just in case auto-advance is switched on later
   }
+
   this->manual_valve_ =
-      this->previous_valve_number_(this->manual_valve_.value_or(this->active_req_.valve_as_opt().value_or(0)));
+      this->previous_valve_number_(this->manual_valve_.value_or(this->active_req_.valve_as_opt().value_or(0)),
+                                   !this->next_prev_ignore_disabled_, true);
+
+  if (!this->manual_valve_.has_value()) {
+    ESP_LOGD(TAG, "previous_valve was called but no valve could be started; perhaps next_prev_ignore_disabled allows "
+                  "only enabled valves and no valves are enabled?");
+    return;
+  }
+
   if (this->manual_selection_delay_.has_value()) {
     this->set_timer_duration_(sprinkler::TIMER_VALVE_SELECTION, this->manual_selection_delay_.value());
     this->start_timer_(sprinkler::TIMER_VALVE_SELECTION);
@@ -758,7 +941,7 @@ void Sprinkler::pause() {
     return;  // we can't pause if we're already paused or if there is no active valve
   }
   this->paused_valve_ = this->active_valve();
-  this->resume_duration_ = this->time_remaining();
+  this->resume_duration_ = this->time_remaining_active_valve();
   this->shutdown(false);
   ESP_LOGD(TAG, "Paused valve %u with %u seconds remaining", this->paused_valve_.value_or(0),
            this->resume_duration_.value_or(0));
@@ -795,6 +978,13 @@ const char *Sprinkler::valve_name(const size_t valve_number) {
   return nullptr;
 }
 
+optional<SprinklerValveRunRequestOrigin> Sprinkler::active_valve_request_is_from() {
+  if (this->active_req_.has_request()) {
+    return this->active_req_.request_is_from();
+  }
+  return nullopt;
+}
+
 optional<size_t> Sprinkler::active_valve() { return this->active_req_.valve_as_opt(); }
 optional<size_t> Sprinkler::paused_valve() { return this->paused_valve_; }
 
@@ -829,8 +1019,7 @@ bool Sprinkler::pump_in_use(SprinklerSwitch *pump_switch) {
       if ((vo.pump_switch()->off_switch() == pump_switch->off_switch()) &&
           (vo.pump_switch()->on_switch() == pump_switch->on_switch())) {
         // now if the SprinklerValveOperator has a pump and it is either ACTIVE, is STARTING with a valve delay or
-        // is
+        //  is STOPPING with a valve delay, its pump can be considered "in use", so just return indicating this now
-        //  STOPPING with a valve delay, its pump can be considered "in use", so just return indicating this now
         if ((vo.state() == ACTIVE) ||
             ((vo.state() == STARTING) && this->start_delay_ && this->start_delay_is_valve_delay_) ||
             ((vo.state() == STOPPING) && this->stop_delay_ && this->stop_delay_is_valve_delay_)) {
@@ -881,7 +1070,93 @@ void Sprinkler::set_pump_state(SprinklerSwitch *pump_switch, bool state) {
   }
 }
 
-optional<uint32_t> Sprinkler::time_remaining() {
+uint32_t Sprinkler::total_cycle_time_all_valves() {
+  uint32_t total_time_remaining = 0;
+
+  for (size_t valve = 0; valve < this->number_of_valves(); valve++) {
+    total_time_remaining += this->valve_run_duration_adjusted(valve);
+  }
+
+  if (this->valve_overlap_) {
+    total_time_remaining -= this->switching_delay_.value_or(0) * (this->number_of_valves() - 1);
+  } else {
+    total_time_remaining += this->switching_delay_.value_or(0) * (this->number_of_valves() - 1);
+  }
+
+  return total_time_remaining;
+}
+
+uint32_t Sprinkler::total_cycle_time_enabled_valves() {
+  uint32_t total_time_remaining = 0;
+  uint32_t valve_count = 0;
+
+  for (size_t valve = 0; valve < this->number_of_valves(); valve++) {
+    if (this->valve_is_enabled_(valve)) {
+      total_time_remaining += this->valve_run_duration_adjusted(valve);
+      valve_count++;
+    }
+  }
+
+  if (valve_count) {
+    if (this->valve_overlap_) {
+      total_time_remaining -= this->switching_delay_.value_or(0) * (valve_count - 1);
+    } else {
+      total_time_remaining += this->switching_delay_.value_or(0) * (valve_count - 1);
+    }
+  }
+
+  return total_time_remaining;
+}
+
+uint32_t Sprinkler::total_cycle_time_enabled_incomplete_valves() {
+  uint32_t total_time_remaining = 0;
+  uint32_t valve_count = 0;
+
+  for (size_t valve = 0; valve < this->number_of_valves(); valve++) {
+    if (this->valve_is_enabled_(valve) && !this->valve_cycle_complete_(valve)) {
+      if (!this->active_valve().has_value() || (valve != this->active_valve().value())) {
+        total_time_remaining += this->valve_run_duration_adjusted(valve);
+        valve_count++;
+      }
+    }
+  }
+
+  if (valve_count) {
+    if (this->valve_overlap_) {
+      total_time_remaining -= this->switching_delay_.value_or(0) * (valve_count - 1);
+    } else {
+      total_time_remaining += this->switching_delay_.value_or(0) * (valve_count - 1);
+    }
+  }
+
+  return total_time_remaining;
+}
+
+uint32_t Sprinkler::total_queue_time() {
+  uint32_t total_time_remaining = 0;
+  uint32_t valve_count = 0;
+
+  for (auto &valve : this->queued_valves_) {
+    if (valve.run_duration) {
+      total_time_remaining += valve.run_duration;
+    } else {
+      total_time_remaining += this->valve_run_duration_adjusted(valve.valve_number);
+    }
+    valve_count++;
+  }
+
+  if (valve_count) {
+    if (this->valve_overlap_) {
+      total_time_remaining -= this->switching_delay_.value_or(0) * (valve_count - 1);
+    } else {
+      total_time_remaining += this->switching_delay_.value_or(0) * (valve_count - 1);
+    }
+  }
+
+  return total_time_remaining;
+}
+
+optional<uint32_t> Sprinkler::time_remaining_active_valve() {
   if (this->active_req_.has_request()) {  // first try to return the value based on active_req_...
     if (this->active_req_.valve_operator() != nullptr) {
       return this->active_req_.valve_operator()->time_remaining();
@@ -895,6 +1170,25 @@ optional<uint32_t> Sprinkler::time_remaining() {
   return nullopt;
 }
 
+optional<uint32_t> Sprinkler::time_remaining_current_operation() {
+  auto total_time_remaining = this->time_remaining_active_valve();
+
+  if (total_time_remaining.has_value()) {
+    if (this->auto_advance()) {
+      total_time_remaining = total_time_remaining.value() + this->total_cycle_time_enabled_incomplete_valves();
+      total_time_remaining =
+          total_time_remaining.value() +
+          (this->total_cycle_time_enabled_valves() * (this->repeat().value_or(0) - this->repeat_count().value_or(0)));
+    }
+
+    if (this->queue_enabled()) {
+      total_time_remaining = total_time_remaining.value() + this->total_queue_time();
+    }
+    return total_time_remaining;
+  }
+  return nullopt;
+}
+
 SprinklerControllerSwitch *Sprinkler::control_switch(size_t valve_number) {
   if (this->is_a_valid_valve(valve_number)) {
     return this->valve_[valve_number].controller_switch;
@@ -957,30 +1251,60 @@ bool Sprinkler::valve_cycle_complete_(const size_t valve_number) {
   return false;
 }
 
-size_t Sprinkler::next_valve_number_(const size_t first_valve) {
+optional<size_t> Sprinkler::next_valve_number_(const optional<size_t> first_valve, const bool include_disabled,
-  if (this->is_a_valid_valve(first_valve) && (first_valve + 1 < this->number_of_valves()))
+                                               const bool include_complete) {
-    return first_valve + 1;
+  auto valve = first_valve.value_or(0);
+  size_t start = first_valve.has_value() ? 1 : 0;
 
-  return 0;
+  if (!this->is_a_valid_valve(valve)) {
+    valve = 0;
   }
 
-size_t Sprinkler::previous_valve_number_(const size_t first_valve) {
+  for (size_t offset = start; offset < this->number_of_valves(); offset++) {
-  if (this->is_a_valid_valve(first_valve) && (first_valve - 1 >= 0))
+    auto valve_of_interest = valve + offset;
-    return first_valve - 1;
+    if (!this->is_a_valid_valve(valve_of_interest)) {
+      valve_of_interest -= this->number_of_valves();
+    }
 
-  return this->number_of_valves() - 1;
+    if ((this->valve_is_enabled_(valve_of_interest) || include_disabled) &&
+        (!this->valve_cycle_complete_(valve_of_interest) || include_complete)) {
+      return valve_of_interest;
+    }
+  }
+  return nullopt;
+}
+
+optional<size_t> Sprinkler::previous_valve_number_(const optional<size_t> first_valve, const bool include_disabled,
+                                                   const bool include_complete) {
+  auto valve = first_valve.value_or(this->number_of_valves() - 1);
+  size_t start = first_valve.has_value() ? 1 : 0;
+
+  if (!this->is_a_valid_valve(valve)) {
+    valve = this->number_of_valves() - 1;
+  }
+
+  for (size_t offset = start; offset < this->number_of_valves(); offset++) {
+    auto valve_of_interest = valve - offset;
+    if (!this->is_a_valid_valve(valve_of_interest)) {
+      valve_of_interest += this->number_of_valves();
+    }
+
+    if ((this->valve_is_enabled_(valve_of_interest) || include_disabled) &&
+        (!this->valve_cycle_complete_(valve_of_interest) || include_complete)) {
+      return valve_of_interest;
+    }
+  }
+  return nullopt;
 }
 
 optional<size_t> Sprinkler::next_valve_number_in_cycle_(const optional<size_t> first_valve) {
-  if (this->reverse_sw_ != nullptr) {
+  if (this->reverse()) {
-    if (this->reverse_sw_->state) {
+    return this->previous_valve_number_(first_valve, false, false);
-      return this->previous_enabled_incomplete_valve_number_(first_valve);
   }
-  }
+  return this->next_valve_number_(first_valve, false, false);
-  return this->next_enabled_incomplete_valve_number_(first_valve);
 }
 
-void Sprinkler::load_next_valve_run_request_(optional<size_t> first_valve) {
+void Sprinkler::load_next_valve_run_request_(const optional<size_t> first_valve) {
   if (this->next_req_.has_request()) {
     if (!this->next_req_.run_duration()) {  // ensure the run duration is set correctly for consumption later on
       this->next_req_.set_run_duration(this->valve_run_duration_adjusted(this->next_req_.valve()));
@@ -988,58 +1312,37 @@ void Sprinkler::load_next_valve_run_request_(optional<size_t> first_valve) {
     return;  // there is already a request pending
   } else if (this->queue_enabled() && !this->queued_valves_.empty()) {
     this->next_req_.set_valve(this->queued_valves_.back().valve_number);
+    this->next_req_.set_request_from(QUEUE);
     if (this->queued_valves_.back().run_duration) {
       this->next_req_.set_run_duration(this->queued_valves_.back().run_duration);
-    } else {
-      this->next_req_.set_run_duration(this->valve_run_duration_adjusted(this->queued_valves_.back().valve_number));
-    }
       this->queued_valves_.pop_back();
-  } else if (this->auto_adv_sw_ != nullptr) {
+    } else if (this->multiplier()) {
-    if (this->auto_adv_sw_->state) {
+      this->next_req_.set_run_duration(this->valve_run_duration_adjusted(this->queued_valves_.back().valve_number));
+      this->queued_valves_.pop_back();
+    } else {
+      this->next_req_.reset();
+    }
+  } else if (this->auto_advance() && this->multiplier()) {
     if (this->next_valve_number_in_cycle_(first_valve).has_value()) {
       // if there is another valve to run as a part of a cycle, load that
       this->next_req_.set_valve(this->next_valve_number_in_cycle_(first_valve).value_or(0));
+      this->next_req_.set_request_from(CYCLE);
       this->next_req_.set_run_duration(
           this->valve_run_duration_adjusted(this->next_valve_number_in_cycle_(first_valve).value_or(0)));
-      } else if ((this->repeat_count_++ < this->target_repeats_.value_or(0))) {
+    } else if ((this->repeat_count_++ < this->repeat().value_or(0))) {
-        ESP_LOGD(TAG, "Repeating - starting cycle %u of %u", this->repeat_count_ + 1,
+      ESP_LOGD(TAG, "Repeating - starting cycle %u of %u", this->repeat_count_ + 1, this->repeat().value_or(0) + 1);
-                 this->target_repeats_.value_or(0) + 1);
       // if there are repeats remaining and no more valves were left in the cycle, start a new cycle
       this->prep_full_cycle_();
-        this->next_req_.set_valve(this->next_valve_number_in_cycle_(first_valve).value_or(0));
+      if (this->next_valve_number_in_cycle_().has_value()) {  // this should always succeed here, but just in case...
+        this->next_req_.set_valve(this->next_valve_number_in_cycle_().value_or(0));
+        this->next_req_.set_request_from(CYCLE);
         this->next_req_.set_run_duration(
-            this->valve_run_duration_adjusted(this->next_valve_number_in_cycle_(first_valve).value_or(0)));
+            this->valve_run_duration_adjusted(this->next_valve_number_in_cycle_().value_or(0)));
       }
     }
   }
 }
 
-optional<size_t> Sprinkler::next_enabled_incomplete_valve_number_(const optional<size_t> first_valve) {
-  auto new_valve_number = this->next_valve_number_(first_valve.value_or(this->number_of_valves() - 1));
-
-  while (new_valve_number != first_valve.value_or(this->number_of_valves() - 1)) {
-    if (this->valve_is_enabled_(new_valve_number) && (!this->valve_cycle_complete_(new_valve_number))) {
-      return new_valve_number;
-    } else {
-      new_valve_number = this->next_valve_number_(new_valve_number);
-    }
-  }
-  return nullopt;
-}
-
-optional<size_t> Sprinkler::previous_enabled_incomplete_valve_number_(const optional<size_t> first_valve) {
-  auto new_valve_number = this->previous_valve_number_(first_valve.value_or(0));
-
-  while (new_valve_number != first_valve.value_or(0)) {
-    if (this->valve_is_enabled_(new_valve_number) && (!this->valve_cycle_complete_(new_valve_number))) {
-      return new_valve_number;
-    } else {
-      new_valve_number = this->previous_valve_number_(new_valve_number);
-    }
-  }
-  return nullopt;
-}
-
 bool Sprinkler::any_valve_is_enabled_() {
   for (size_t valve_number = 0; valve_number < this->number_of_valves(); valve_number++) {
     if (this->valve_is_enabled_(valve_number))
@@ -1058,8 +1361,9 @@ void Sprinkler::start_valve_(SprinklerValveRunRequest *req) {
   for (auto &vo : this->valve_op_) {  // find the first available SprinklerValveOperator, load it and start it up
     if (vo.state() == IDLE) {
       auto run_duration = req->run_duration() ? req->run_duration() : this->valve_run_duration_adjusted(req->valve());
-      ESP_LOGD(TAG, "Starting valve %u for %u seconds, cycle %u of %u", req->valve(), run_duration,
+      ESP_LOGD(TAG, "%s is starting valve %u for %u seconds, cycle %u of %u",
-               this->repeat_count_ + 1, this->target_repeats_.value_or(0) + 1);
+               this->req_as_str_(req->request_is_from()).c_str(), req->valve(), run_duration, this->repeat_count_ + 1,
+               this->repeat().value_or(0) + 1);
       req->set_valve_operator(&vo);
       vo.set_controller(this);
       vo.set_valve(&this->valve_[req->valve()]);
@@ -1085,15 +1389,14 @@ void Sprinkler::all_valves_off_(const bool include_pump) {
 }
 
 void Sprinkler::prep_full_cycle_() {
-  if (this->auto_adv_sw_ != nullptr) {
+  this->set_auto_advance(true);
-    if (!this->auto_adv_sw_->state) {
+
-      this->auto_adv_sw_->publish_state(true);
-    }
-  }
   if (!this->any_valve_is_enabled_()) {
     for (auto &valve : this->valve_) {
       if (valve.enable_switch != nullptr) {
-        valve.enable_switch->publish_state(true);
+        if (!valve.enable_switch->state) {
+          valve.enable_switch->turn_on();
+        }
       }
     }
   }
@@ -1169,15 +1472,20 @@ void Sprinkler::fsm_transition_() {
 
 void Sprinkler::fsm_transition_from_shutdown_() {
   this->load_next_valve_run_request_();
+
+  if (this->next_req_.has_request()) {  // there is a valve to run...
     this->active_req_.set_valve(this->next_req_.valve());
+    this->active_req_.set_request_from(this->next_req_.request_is_from());
     this->active_req_.set_run_duration(this->next_req_.run_duration());
     this->next_req_.reset();
 
-  this->set_timer_duration_(sprinkler::TIMER_SM, this->active_req_.run_duration() - this->switching_delay_.value_or(0));
+    this->set_timer_duration_(sprinkler::TIMER_SM,
+                              this->active_req_.run_duration() - this->switching_delay_.value_or(0));
     this->start_timer_(sprinkler::TIMER_SM);
     this->start_valve_(&this->active_req_);
     this->state_ = ACTIVE;
   }
+}
 
 void Sprinkler::fsm_transition_from_valve_run_() {
   if (!this->active_req_.has_request()) {  // dummy check...
@@ -1186,7 +1494,9 @@ void Sprinkler::fsm_transition_from_valve_run_() {
   }
 
   if (!this->timer_active_(sprinkler::TIMER_SM)) {  // only flag the valve as "complete" if the timer finished
+    if ((this->active_req_.request_is_from() == CYCLE) || (this->active_req_.request_is_from() == USER)) {
       this->mark_valve_cycle_complete_(this->active_req_.valve());
+    }
   } else {
     ESP_LOGD(TAG, "Valve cycle interrupted - NOT flagging valve as complete and stopping current valve");
     for (auto &vo : this->valve_op_) {
@@ -1201,6 +1511,7 @@ void Sprinkler::fsm_transition_from_valve_run_() {
         this->valve_pump_switch(this->active_req_.valve()) == this->valve_pump_switch(this->next_req_.valve());
 
     this->active_req_.set_valve(this->next_req_.valve());
+    this->active_req_.set_request_from(this->next_req_.request_is_from());
     this->active_req_.set_run_duration(this->next_req_.run_duration());
     this->next_req_.reset();
 
@@ -1230,6 +1541,22 @@ void Sprinkler::fsm_transition_to_shutdown_() {
   this->start_timer_(sprinkler::TIMER_SM);
 }
 
+std::string Sprinkler::req_as_str_(SprinklerValveRunRequestOrigin origin) {
+  switch (origin) {
+    case USER:
+      return "USER";
+
+    case CYCLE:
+      return "CYCLE";
+
+    case QUEUE:
+      return "QUEUE";
+
+    default:
+      return "UNKNOWN";
+  }
+}
+
 std::string Sprinkler::state_as_str_(SprinklerState state) {
   switch (state) {
     case IDLE:
@@ -1300,8 +1627,8 @@ void Sprinkler::dump_config() {
   if (this->manual_selection_delay_.has_value()) {
     ESP_LOGCONFIG(TAG, "  Manual Selection Delay: %u seconds", this->manual_selection_delay_.value_or(0));
   }
-  if (this->target_repeats_.has_value()) {
+  if (this->repeat().has_value()) {
-    ESP_LOGCONFIG(TAG, "  Repeat Cycles: %u times", this->target_repeats_.value_or(0));
+    ESP_LOGCONFIG(TAG, "  Repeat Cycles: %u times", this->repeat().value_or(0));
   }
   if (this->start_delay_) {
     if (this->start_delay_is_valve_delay_) {
@@ -1329,7 +1656,7 @@ void Sprinkler::dump_config() {
   for (size_t valve_number = 0; valve_number < this->number_of_valves(); valve_number++) {
     ESP_LOGCONFIG(TAG, "  Valve %u:", valve_number);
     ESP_LOGCONFIG(TAG, "    Name: %s", this->valve_name(valve_number));
-    ESP_LOGCONFIG(TAG, "    Run Duration: %u seconds", this->valve_[valve_number].run_duration);
+    ESP_LOGCONFIG(TAG, "    Run Duration: %u seconds", this->valve_run_duration(valve_number));
     if (this->valve_[valve_number].valve_switch.pulse_duration()) {
       ESP_LOGCONFIG(TAG, "    Pulse Duration: %u milliseconds",
                     this->valve_[valve_number].valve_switch.pulse_duration());

esphome/components/sprinkler/sprinkler.h

@@ -3,6 +3,7 @@
 #include "esphome/core/automation.h"
 #include "esphome/core/component.h"
 #include "esphome/core/hal.h"
+#include "esphome/components/number/number.h"
 #include "esphome/components/switch/switch.h"
 
 #include <vector>
@@ -10,6 +11,8 @@
 namespace esphome {
 namespace sprinkler {
 
+const std::string min_str = "min";
+
 enum SprinklerState : uint8_t {
   // NOTE: these states are used by both SprinklerValveOperator and Sprinkler (the controller)!
   IDLE,      // system/valve is off
@@ -24,7 +27,14 @@ enum SprinklerTimerIndex : uint8_t {
   TIMER_VALVE_SELECTION = 1,
 };
 
+enum SprinklerValveRunRequestOrigin : uint8_t {
+  USER,
+  CYCLE,
+  QUEUE,
+};
+
 class Sprinkler;                  // this component
+class SprinklerControllerNumber;  // number components that appear in the front end; based on number core
 class SprinklerControllerSwitch;  // switches that appear in the front end; based on switch core
 class SprinklerSwitch;            // switches representing any valve or pump; provides abstraction for latching valves
 class SprinklerValveOperator;     // manages all switching on/off of valves and associated pumps
@@ -76,6 +86,7 @@ struct SprinklerTimer {
 };
 
 struct SprinklerValve {
+  SprinklerControllerNumber *run_duration_number;
   SprinklerControllerSwitch *controller_switch;
   SprinklerControllerSwitch *enable_switch;
   SprinklerSwitch valve_switch;
@@ -88,6 +99,25 @@ struct SprinklerValve {
   std::unique_ptr<Automation<>> valve_turn_on_automation;
 };
 
+class SprinklerControllerNumber : public number::Number, public Component {
+ public:
+  void setup() override;
+  void dump_config() override;
+  float get_setup_priority() const override { return setup_priority::HARDWARE; }
+
+  Trigger<float> *get_set_trigger() const { return set_trigger_; }
+  void set_initial_value(float initial_value) { initial_value_ = initial_value; }
+  void set_restore_value(bool restore_value) { this->restore_value_ = restore_value; }
+
+ protected:
+  void control(float value) override;
+  float initial_value_{NAN};
+  bool restore_value_{true};
+  Trigger<float> *set_trigger_ = new Trigger<float>();
+
+  ESPPreferenceObject pref_;
+};
+
 class SprinklerControllerSwitch : public switch_::Switch, public Component {
  public:
   SprinklerControllerSwitch();
@@ -96,27 +126,19 @@ class SprinklerControllerSwitch : public switch_::Switch, public Component {
   void dump_config() override;
 
   void set_state_lambda(std::function<optional<bool>()> &&f);
-  void set_restore_state(bool restore_state);
   Trigger<> *get_turn_on_trigger() const;
   Trigger<> *get_turn_off_trigger() const;
-  void set_optimistic(bool optimistic);
-  void set_assumed_state(bool assumed_state);
   void loop() override;
 
   float get_setup_priority() const override;
 
  protected:
-  bool assumed_state() override;
-
   void write_state(bool state) override;
 
   optional<std::function<optional<bool>()>> f_;
-  bool optimistic_{false};
-  bool assumed_state_{false};
   Trigger<> *turn_on_trigger_;
   Trigger<> *turn_off_trigger_;
   Trigger<> *prev_trigger_{nullptr};
-  bool restore_state_{false};
 };
 
 class SprinklerValveOperator {
@@ -160,6 +182,7 @@ class SprinklerValveRunRequest {
   SprinklerValveRunRequest(size_t valve_number, uint32_t run_duration, SprinklerValveOperator *valve_op);
   bool has_request();
   bool has_valve_operator();
+  void set_request_from(SprinklerValveRunRequestOrigin origin);
   void set_run_duration(uint32_t run_duration);
   void set_valve(size_t valve_number);
   void set_valve_operator(SprinklerValveOperator *valve_op);
@@ -168,12 +191,14 @@ class SprinklerValveRunRequest {
   size_t valve();
   optional<size_t> valve_as_opt();
   SprinklerValveOperator *valve_operator();
+  SprinklerValveRunRequestOrigin request_is_from();
 
  protected:
   bool has_valve_{false};
   size_t valve_number_{0};
   uint32_t run_duration_{0};
   SprinklerValveOperator *valve_op_{nullptr};
+  SprinklerValveRunRequestOrigin origin_{USER};
 };
 
 class Sprinkler : public Component, public EntityBase {
@@ -196,6 +221,11 @@ class Sprinkler : public Component, public EntityBase {
   void set_controller_auto_adv_switch(SprinklerControllerSwitch *auto_adv_switch);
   void set_controller_queue_enable_switch(SprinklerControllerSwitch *queue_enable_switch);
   void set_controller_reverse_switch(SprinklerControllerSwitch *reverse_switch);
+  void set_controller_standby_switch(SprinklerControllerSwitch *standby_switch);
+
+  /// configure important controller number components
+  void set_controller_multiplier_number(SprinklerControllerNumber *multiplier_number);
+  void set_controller_repeat_number(SprinklerControllerNumber *repeat_number);
 
   /// configure a valve's switch object and run duration. run_duration is time in seconds.
   void configure_valve_switch(size_t valve_number, switch_::Switch *valve_switch, uint32_t run_duration);
@@ -207,9 +237,18 @@ class Sprinkler : public Component, public EntityBase {
   void configure_valve_pump_switch_pulsed(size_t valve_number, switch_::Switch *pump_switch_off,
                                           switch_::Switch *pump_switch_on, uint32_t pulse_duration);
 
+  /// configure a valve's run duration number component
+  void configure_valve_run_duration_number(size_t valve_number, SprinklerControllerNumber *run_duration_number);
+
+  /// sets the multiplier value to '1 / divider' and sets repeat value to divider
+  void set_divider(optional<uint32_t> divider);
+
   /// value multiplied by configured run times -- used to extend or shorten the cycle
   void set_multiplier(optional<float> multiplier);
 
+  /// enable/disable skipping of disabled valves by the next and previous actions
+  void set_next_prev_ignore_disabled_valves(bool ignore_disabled);
+
   /// set how long the pump should start after the valve (when the pump is starting)
   void set_pump_start_delay(uint32_t start_delay);
 
@@ -250,6 +289,9 @@ class Sprinkler : public Component, public EntityBase {
   /// if reverse is true, controller will iterate through all enabled valves in reverse (descending) order
   void set_reverse(bool reverse);
 
+  /// if standby is true, controller will refuse to activate any valves
+  void set_standby(bool standby);
+
   /// returns valve_number's run duration in seconds
   uint32_t valve_run_duration(size_t valve_number);
 
@@ -274,6 +316,9 @@ class Sprinkler : public Component, public EntityBase {
   /// returns true if reverse is enabled
   bool reverse();
 
+  /// returns true if standby is enabled
+  bool standby();
+
   /// starts the controller from the first valve in the queue and disables auto_advance.
   /// if the queue is empty, does nothing.
   void start_from_queue();
@@ -283,7 +328,7 @@ class Sprinkler : public Component, public EntityBase {
   void start_full_cycle();
 
   /// activates a single valve and disables auto_advance.
-  void start_single_valve(optional<size_t> valve_number);
+  void start_single_valve(optional<size_t> valve_number, optional<uint32_t> run_duration = nullopt);
 
   /// adds a valve into the queue. queued valves have priority over valves to be run as a part of a full cycle.
   /// NOTE: queued valves will always run, regardless of auto-advance and/or valve enable switches.
@@ -316,6 +361,9 @@ class Sprinkler : public Component, public EntityBase {
   /// returns a pointer to a valve's name string object; returns nullptr if valve_number is invalid
   const char *valve_name(size_t valve_number);
 
+  /// returns what invoked the valve that is currently active, if any. check with 'has_value()'
+  optional<SprinklerValveRunRequestOrigin> active_valve_request_is_from();
+
   /// returns the number of the valve that is currently active, if any. check with 'has_value()'
   optional<size_t> active_valve();
 
@@ -341,8 +389,23 @@ class Sprinkler : public Component, public EntityBase {
   /// switches on/off a pump "safely" by checking that the new state will not conflict with another controller
   void set_pump_state(SprinklerSwitch *pump_switch, bool state);
 
-  /// returns the amount of time remaining in seconds for the active valve, if any. check with 'has_value()'
+  /// returns the amount of time in seconds required for all valves
-  optional<uint32_t> time_remaining();
+  uint32_t total_cycle_time_all_valves();
+
+  /// returns the amount of time in seconds required for all enabled valves
+  uint32_t total_cycle_time_enabled_valves();
+
+  /// returns the amount of time in seconds required for all enabled & incomplete valves, not including the active valve
+  uint32_t total_cycle_time_enabled_incomplete_valves();
+
+  /// returns the amount of time in seconds required for all valves in the queue
+  uint32_t total_queue_time();
+
+  /// returns the amount of time remaining in seconds for the active valve, if any
+  optional<uint32_t> time_remaining_active_valve();
+
+  /// returns the amount of time remaining in seconds for all valves remaining, including the active valve, if any
+  optional<uint32_t> time_remaining_current_operation();
 
   /// returns a pointer to a valve's control switch object
   SprinklerControllerSwitch *control_switch(size_t valve_number);
@@ -371,9 +434,13 @@ class Sprinkler : public Component, public EntityBase {
   /// returns true if valve's cycle is flagged as complete
   bool valve_cycle_complete_(size_t valve_number);
 
-  /// returns the number of the next/previous valve in the vector
+  /// returns the number of the next valve in the vector or nullopt if no valves match criteria
-  size_t next_valve_number_(size_t first_valve);
+  optional<size_t> next_valve_number_(optional<size_t> first_valve = nullopt, bool include_disabled = true,
-  size_t previous_valve_number_(size_t first_valve);
+                                      bool include_complete = true);
+
+  /// returns the number of the previous valve in the vector or nullopt if no valves match criteria
+  optional<size_t> previous_valve_number_(optional<size_t> first_valve = nullopt, bool include_disabled = true,
+                                          bool include_complete = true);
 
   /// returns the number of the next valve that should be activated in a full cycle.
   ///  if no valve is next (cycle is complete), returns no value (check with 'has_value()')
@@ -385,11 +452,6 @@ class Sprinkler : public Component, public EntityBase {
   ///  if no valve is next (for example, a full cycle is complete), next_req_ is reset via reset().
   void load_next_valve_run_request_(optional<size_t> first_valve = nullopt);
 
-  /// returns the number of the next/previous valve that should be activated.
-  ///  if no valve is next (cycle is complete), returns no value (check with 'has_value()')
-  optional<size_t> next_enabled_incomplete_valve_number_(optional<size_t> first_valve);
-  optional<size_t> previous_enabled_incomplete_valve_number_(optional<size_t> first_valve);
-
   /// returns true if any valve is enabled
   bool any_valve_is_enabled_();
 
@@ -424,7 +486,10 @@ class Sprinkler : public Component, public EntityBase {
   /// starts up the system from IDLE state
   void fsm_transition_to_shutdown_();
 
-  /// return the current FSM state as a string
+  /// return the specified SprinklerValveRunRequestOrigin as a string
+  std::string req_as_str_(SprinklerValveRunRequestOrigin origin);
+
+  /// return the specified SprinklerState state as a string
   std::string state_as_str_(SprinklerState state);
 
   /// Start/cancel/get status of valve timers
@@ -446,6 +511,9 @@ class Sprinkler : public Component, public EntityBase {
   /// Maximum allowed queue size
   const uint8_t max_queue_size_{100};
 
+  /// When set to true, the next and previous actions will skip disabled valves
+  bool next_prev_ignore_disabled_{false};
+
   /// Pump should be off during valve_open_delay interval
   bool pump_switch_off_during_valve_open_delay_{false};
 
@@ -518,12 +586,19 @@ class Sprinkler : public Component, public EntityBase {
   SprinklerControllerSwitch *controller_sw_{nullptr};
   SprinklerControllerSwitch *queue_enable_sw_{nullptr};
   SprinklerControllerSwitch *reverse_sw_{nullptr};
+  SprinklerControllerSwitch *standby_sw_{nullptr};
+
+  /// Number components we'll present to the front end
+  SprinklerControllerNumber *multiplier_number_{nullptr};
+  SprinklerControllerNumber *repeat_number_{nullptr};
 
   std::unique_ptr<ShutdownAction<>> sprinkler_shutdown_action_;
+  std::unique_ptr<ShutdownAction<>> sprinkler_standby_shutdown_action_;
   std::unique_ptr<ResumeOrStartAction<>> sprinkler_resumeorstart_action_;
 
   std::unique_ptr<Automation<>> sprinkler_turn_off_automation_;
   std::unique_ptr<Automation<>> sprinkler_turn_on_automation_;
+  std::unique_ptr<Automation<>> sprinkler_standby_turn_on_automation_;
 };
 
 }  // namespace sprinkler