Merge pull request #4852 from esphome/bump-2023.5.1

2023.5.1

esphome/components/sprinkler/__init__.py

@@ -599,15 +599,6 @@ async def to_code(config):
             )
             cg.add(var.set_controller_auto_adv_switch(sw_aa_var))
 
-            if CONF_QUEUE_ENABLE_SWITCH in sprinkler_controller:
-                sw_qen_var = await switch.new_switch(
-                    sprinkler_controller[CONF_QUEUE_ENABLE_SWITCH]
-                )
-                await cg.register_component(
-                    sw_qen_var, sprinkler_controller[CONF_QUEUE_ENABLE_SWITCH]
-                )
-                cg.add(var.set_controller_queue_enable_switch(sw_qen_var))
-
             if CONF_REVERSE_SWITCH in sprinkler_controller:
                 sw_rev_var = await switch.new_switch(
                     sprinkler_controller[CONF_REVERSE_SWITCH]
@@ -626,15 +617,20 @@ async def to_code(config):
             )
             cg.add(var.set_controller_standby_switch(sw_stb_var))
 
+        if CONF_QUEUE_ENABLE_SWITCH in sprinkler_controller:
+            sw_qen_var = await switch.new_switch(
+                sprinkler_controller[CONF_QUEUE_ENABLE_SWITCH]
+            )
+            await cg.register_component(
+                sw_qen_var, sprinkler_controller[CONF_QUEUE_ENABLE_SWITCH]
+            )
+            cg.add(var.set_controller_queue_enable_switch(sw_qen_var))
+
         if CONF_MULTIPLIER_NUMBER in sprinkler_controller:
             num_mult_var = await number.new_number(
                 sprinkler_controller[CONF_MULTIPLIER_NUMBER],
-                    min_value=sprinkler_controller[CONF_MULTIPLIER_NUMBER][
+                min_value=sprinkler_controller[CONF_MULTIPLIER_NUMBER][CONF_MIN_VALUE],
-                        CONF_MIN_VALUE
+                max_value=sprinkler_controller[CONF_MULTIPLIER_NUMBER][CONF_MAX_VALUE],
-                    ],
-                    max_value=sprinkler_controller[CONF_MULTIPLIER_NUMBER][
-                        CONF_MAX_VALUE
-                    ],
                 step=sprinkler_controller[CONF_MULTIPLIER_NUMBER][CONF_STEP],
             )
             await cg.register_component(

esphome/components/sprinkler/sprinkler.cpp

@@ -147,22 +147,22 @@ SprinklerValveOperator::SprinklerValveOperator(SprinklerValve *valve, Sprinkler
     : controller_(controller), valve_(valve) {}
 
 void SprinklerValveOperator::loop() {
-  if (millis() >= this->pinned_millis_) {  // dummy check
+  if (millis() >= this->start_millis_) {  // dummy check
     switch (this->state_) {
       case STARTING:
-        if (millis() > (this->pinned_millis_ + this->start_delay_)) {
+        if (millis() > (this->start_millis_ + this->start_delay_)) {
           this->run_();  // start_delay_ has been exceeded, so ensure both valves are on and update the state
         }
         break;
 
       case ACTIVE:
-        if (millis() > (this->pinned_millis_ + this->start_delay_ + this->run_duration_)) {
+        if (millis() > (this->start_millis_ + this->start_delay_ + this->run_duration_)) {
           this->stop();  // start_delay_ + run_duration_ has been exceeded, start shutting down
         }
         break;
 
       case STOPPING:
-        if (millis() > (this->pinned_millis_ + this->stop_delay_)) {
+        if (millis() > (this->stop_millis_ + this->stop_delay_)) {
           this->kill_();  // stop_delay_has been exceeded, ensure all valves are off
         }
         break;
@@ -185,7 +185,8 @@ void SprinklerValveOperator::set_valve(SprinklerValve *valve) {
   if (valve != nullptr) {
     this->state_ = IDLE;      // reset state
     this->run_duration_ = 0;  // reset to ensure the valve isn't started without updating it
-    this->pinned_millis_ = 0;  // reset because (new) valve has not been started yet
+    this->start_millis_ = 0;  // reset because (new) valve has not been started yet
+    this->stop_millis_ = 0;   // reset because (new) valve has not been started yet
     this->kill_();            // ensure everything is off before we let go!
     this->valve_ = valve;     // finally, set the pointer to the new valve
   }
@@ -221,7 +222,8 @@ void SprinklerValveOperator::start() {
   } else {
     this->run_();  // there is no start_delay_, so just start the pump and valve
   }
-  this->pinned_millis_ = millis();  // save the time the start request was made
+  this->stop_millis_ = 0;
+  this->start_millis_ = millis();  // save the time the start request was made
 }
 
 void SprinklerValveOperator::stop() {
@@ -238,19 +240,33 @@ void SprinklerValveOperator::stop() {
     if (this->pump_switch()->state()) {  // if the pump is still on at this point, it may be in use...
       this->valve_off_();                // ...so just switch the valve off now to ensure consistent run time
     }
-    this->pinned_millis_ = millis();  // save the time the stop request was made
   } else {
     this->kill_();  // there is no stop_delay_, so just stop the pump and valve
   }
+  this->stop_millis_ = millis();  // save the time the stop request was made
 }
 
-uint32_t SprinklerValveOperator::run_duration() { return this->run_duration_; }
+uint32_t SprinklerValveOperator::run_duration() { return this->run_duration_ / 1000; }
 
 uint32_t SprinklerValveOperator::time_remaining() {
-  if ((this->state_ == STARTING) || (this->state_ == ACTIVE)) {
+  if (this->start_millis_ == 0) {
-    return (this->pinned_millis_ + this->start_delay_ + this->run_duration_ - millis()) / 1000;
+    return this->run_duration();  // hasn't been started yet
   }
-  return 0;
+
+  if (this->stop_millis_) {
+    if (this->stop_millis_ - this->start_millis_ >= this->start_delay_ + this->run_duration_) {
+      return 0;  // valve was active for more than its configured duration, so we are done
+    } else {
+      // we're stopped; return time remaining
+      return (this->run_duration_ - (this->stop_millis_ - this->start_millis_)) / 1000;
+    }
+  }
+
+  auto completed_millis = this->start_millis_ + this->start_delay_ + this->run_duration_;
+  if (completed_millis > millis()) {
+    return (completed_millis - millis()) / 1000;  // running now
+  }
+  return 0;  // run completed
 }
 
 SprinklerState SprinklerValveOperator::state() { return this->state_; }
@@ -386,6 +402,9 @@ void Sprinkler::loop() {
   for (auto &vo : this->valve_op_) {
     vo.loop();
   }
+  if (this->prev_req_.has_request() && this->prev_req_.valve_operator()->state() == IDLE) {
+    this->prev_req_.reset();
+  }
 }
 
 void Sprinkler::add_valve(SprinklerControllerSwitch *valve_sw, SprinklerControllerSwitch *enable_sw) {
@@ -732,7 +751,7 @@ bool Sprinkler::auto_advance() {
   if (this->auto_adv_sw_ != nullptr) {
     return this->auto_adv_sw_->state;
   }
-  return false;
+  return true;
 }
 
 float Sprinkler::multiplier() {
@@ -972,7 +991,14 @@ optional<SprinklerValveRunRequestOrigin> Sprinkler::active_valve_request_is_from
   return nullopt;
 }
 
-optional<size_t> Sprinkler::active_valve() { return this->active_req_.valve_as_opt(); }
+optional<size_t> Sprinkler::active_valve() {
+  if (!this->valve_overlap_ && this->prev_req_.has_request() &&
+      (this->prev_req_.valve_operator()->state() == STARTING || this->prev_req_.valve_operator()->state() == ACTIVE)) {
+    return this->prev_req_.valve_as_opt();
+  }
+  return this->active_req_.valve_as_opt();
+}
+
 optional<size_t> Sprinkler::paused_valve() { return this->paused_valve_; }
 
 optional<size_t> Sprinkler::queued_valve() {
@@ -1097,22 +1123,35 @@ uint32_t Sprinkler::total_cycle_time_enabled_valves() {
 
 uint32_t Sprinkler::total_cycle_time_enabled_incomplete_valves() {
   uint32_t total_time_remaining = 0;
-  uint32_t valve_count = 0;
+  uint32_t enabled_valve_count = 0;
+  uint32_t incomplete_valve_count = 0;
 
   for (size_t valve = 0; valve < this->number_of_valves(); valve++) {
-    if (this->valve_is_enabled_(valve) && !this->valve_cycle_complete_(valve)) {
+    if (this->valve_is_enabled_(valve)) {
+      enabled_valve_count++;
+      if (!this->valve_cycle_complete_(valve)) {
         if (!this->active_valve().has_value() || (valve != this->active_valve().value())) {
           total_time_remaining += this->valve_run_duration_adjusted(valve);
-        valve_count++;
+          incomplete_valve_count++;
+        } else {
+          // to get here, there must be an active valve and this valve must be equal to 'valve'
+          if (this->active_req_.valve_operator() == nullptr) {  // no SVO has been assigned yet so it hasn't started
+            total_time_remaining += this->valve_run_duration_adjusted(valve);
+            incomplete_valve_count++;
+          }
+        }
       }
     }
   }
 
-  if (valve_count) {
+  if (incomplete_valve_count >= enabled_valve_count) {
+    incomplete_valve_count--;
+  }
+  if (incomplete_valve_count) {
     if (this->valve_overlap_) {
-      total_time_remaining -= this->switching_delay_.value_or(0) * (valve_count - 1);
+      total_time_remaining -= this->switching_delay_.value_or(0) * incomplete_valve_count;
     } else {
-      total_time_remaining += this->switching_delay_.value_or(0) * (valve_count - 1);
+      total_time_remaining += this->switching_delay_.value_or(0) * incomplete_valve_count;
     }
   }
 
@@ -1149,32 +1188,33 @@ optional<uint32_t> Sprinkler::time_remaining_active_valve() {
       return this->active_req_.valve_operator()->time_remaining();
     }
   }
-  for (auto &vo : this->valve_op_) {  // ...else return the value from the first non-IDLE SprinklerValveOperator
+  if (this->prev_req_.has_request()) {  // try to return the value based on prev_req_...
-    if (vo.state() != IDLE) {
+    if (this->prev_req_.valve_operator() != nullptr) {
-      return vo.time_remaining();
+      return this->prev_req_.valve_operator()->time_remaining();
     }
   }
   return nullopt;
 }
 
 optional<uint32_t> Sprinkler::time_remaining_current_operation() {
-  auto total_time_remaining = this->time_remaining_active_valve();
+  if (!this->time_remaining_active_valve().has_value() && this->state_ == IDLE) {
+    return nullopt;
+  }
 
-  if (total_time_remaining.has_value()) {
+  auto total_time_remaining = this->time_remaining_active_valve().value_or(0);
   if (this->auto_advance()) {
-      total_time_remaining = total_time_remaining.value() + this->total_cycle_time_enabled_incomplete_valves();
+    total_time_remaining += this->total_cycle_time_enabled_incomplete_valves();
-      total_time_remaining =
+    if (this->repeat().value_or(0) > 0) {
-          total_time_remaining.value() +
+      total_time_remaining +=
           (this->total_cycle_time_enabled_valves() * (this->repeat().value_or(0) - this->repeat_count().value_or(0)));
     }
+  }
 
   if (this->queue_enabled()) {
-      total_time_remaining = total_time_remaining.value() + this->total_queue_time();
+    total_time_remaining += this->total_queue_time();
   }
   return total_time_remaining;
 }
-  return nullopt;
-}
 
 bool Sprinkler::any_controller_is_active() {
   if (this->state_ != IDLE) {
@@ -1305,6 +1345,12 @@ optional<size_t> Sprinkler::next_valve_number_in_cycle_(const optional<size_t> f
 }
 
 void Sprinkler::load_next_valve_run_request_(const optional<size_t> first_valve) {
+  if (this->active_req_.has_request()) {
+    this->prev_req_ = this->active_req_;
+  } else {
+    this->prev_req_.reset();
+  }
+
   if (this->next_req_.has_request()) {
     if (!this->next_req_.run_duration()) {  // ensure the run duration is set correctly for consumption later on
       this->next_req_.set_run_duration(this->valve_run_duration_adjusted(this->next_req_.valve()));

esphome/components/sprinkler/sprinkler.h

@@ -170,7 +170,8 @@ class SprinklerValveOperator {
   uint32_t start_delay_{0};
   uint32_t stop_delay_{0};
   uint32_t run_duration_{0};
-  uint64_t pinned_millis_{0};
+  uint64_t start_millis_{0};
+  uint64_t stop_millis_{0};
   Sprinkler *controller_{nullptr};
   SprinklerValve *valve_{nullptr};
   SprinklerState state_{IDLE};
@@ -538,15 +539,18 @@ class Sprinkler : public Component {
   /// The valve run request that is currently active
   SprinklerValveRunRequest active_req_;
 
+  /// The next run request for the controller to consume after active_req_ is complete
+  SprinklerValveRunRequest next_req_;
+
+  /// The previous run request the controller processed
+  SprinklerValveRunRequest prev_req_;
+
   /// The number of the manually selected valve currently selected
   optional<size_t> manual_valve_;
 
   /// The number of the valve to resume from (if paused)
   optional<size_t> paused_valve_;
 
-  /// The next run request for the controller to consume after active_req_ is complete
-  SprinklerValveRunRequest next_req_;
-
   /// Set the number of times to repeat a full cycle
   optional<uint32_t> target_repeats_;
 

esphome/components/ttp229_bsf/__init__.py

@@ -3,7 +3,6 @@ import esphome.config_validation as cv
 from esphome import pins
 from esphome.const import CONF_ID, CONF_SDO_PIN, CONF_SCL_PIN
 
-DEPENDENCIES = ["i2c"]
 AUTO_LOAD = ["binary_sensor"]
 
 CONF_TTP229_ID = "ttp229_id"

esphome/const.py

@@ -1,6 +1,6 @@
 """Constants used by esphome."""
 
-__version__ = "2023.5.0"
+__version__ = "2023.5.1"
 
 ALLOWED_NAME_CHARS = "abcdefghijklmnopqrstuvwxyz0123456789-_"