UART change at runtime (#5909)

Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>

esphome/components/uart/uart_component_esp32_arduino.cpp

@@ -109,6 +109,11 @@ void ESP32ArduinoUARTComponent::setup() {
     this->number_ = next_uart_num;
     this->hw_serial_ = new HardwareSerial(next_uart_num++);  // NOLINT(cppcoreguidelines-owning-memory)
   }
+
+  this->load_settings(false);
+}
+
+void ESP32ArduinoUARTComponent::load_settings(bool dump_config) {
   int8_t tx = this->tx_pin_ != nullptr ? this->tx_pin_->get_pin() : -1;
   int8_t rx = this->rx_pin_ != nullptr ? this->rx_pin_->get_pin() : -1;
   bool invert = false;
@@ -118,6 +123,10 @@ void ESP32ArduinoUARTComponent::setup() {
     invert = true;
   this->hw_serial_->setRxBufferSize(this->rx_buffer_size_);
   this->hw_serial_->begin(this->baud_rate_, get_config(), rx, tx, invert);
+  if (dump_config) {
+    ESP_LOGCONFIG(TAG, "UART %u was reloaded.", this->number_);
+    this->dump_config();
+  }
 }
 
 void ESP32ArduinoUARTComponent::dump_config() {

esphome/components/uart/uart_component_esp32_arduino.h

@@ -32,6 +32,20 @@ class ESP32ArduinoUARTComponent : public UARTComponent, public Component {
   HardwareSerial *get_hw_serial() { return this->hw_serial_; }
   uint8_t get_hw_serial_number() { return this->number_; }
 
+  /**
+   * Load the UART with the current settings.
+   * @param dump_config (Optional, default `true`): True for displaying new settings or
+   * false to change it quitely
+   *
+   * Example:
+   * ```cpp
+   * id(uart1).load_settings();
+   * ```
+   *
+   * This will load the current UART interface with the latest settings (baud_rate, parity, etc).
+   */
+  void load_settings(bool dump_config = true);
+
  protected:
   void check_logger_conflict() override;
 

esphome/components/uart/uart_component_esp_idf.cpp

@@ -122,9 +122,21 @@ void IDFUARTComponent::setup() {
   xSemaphoreGive(this->lock_);
 }
 
+void IDFUARTComponent::load_settings(bool dump_config) {
+  uart_config_t uart_config = this->get_config_();
+  esp_err_t err = uart_param_config(this->uart_num_, &uart_config);
+  if (err != ESP_OK) {
+    ESP_LOGW(TAG, "uart_param_config failed: %s", esp_err_to_name(err));
+    this->mark_failed();
+    return;
+  } else if (dump_config) {
+    ESP_LOGCONFIG(TAG, "UART %u was reloaded.", this->uart_num_);
+    this->dump_config();
+  }
+}
+
 void IDFUARTComponent::dump_config() {
-  ESP_LOGCONFIG(TAG, "UART Bus:");
+  ESP_LOGCONFIG(TAG, "UART Bus %u:", this->uart_num_);
-  ESP_LOGCONFIG(TAG, "  Number: %u", this->uart_num_);
   LOG_PIN("  TX Pin: ", tx_pin_);
   LOG_PIN("  RX Pin: ", rx_pin_);
   if (this->rx_pin_ != nullptr) {

esphome/components/uart/uart_component_esp_idf.h

@@ -26,6 +26,20 @@ class IDFUARTComponent : public UARTComponent, public Component {
   uint8_t get_hw_serial_number() { return this->uart_num_; }
   QueueHandle_t *get_uart_event_queue() { return &this->uart_event_queue_; }
 
+  /**
+   * Load the UART with the current settings.
+   * @param dump_config (Optional, default `true`): True for displaying new settings or
+   * false to change it quitely
+   *
+   * Example:
+   * ```cpp
+   * id(uart1).load_settings();
+   * ```
+   *
+   * This will load the current UART interface with the latest settings (baud_rate, parity, etc).
+   */
+  void load_settings(bool dump_config = true);
+
  protected:
   void check_logger_conflict() override;
   uart_port_t uart_num_;