Home-IoT/esphome
1
0
Fork 0
mirror of https://github.com/esphome/esphome.git synced 2024-12-22 05:24:53 +01:00
Code Issues Projects Releases Packages Wiki Activity Actions 4

Fix clang-tidy header filter (#2385)

Browse source 
* Fix clang-tidy header filter

* Allow private members

* Fix clang-tidy detections

* Run clang-format

* Fix remaining detections

* Fix graph

* Run clang-format
This commit is contained in:
Otto Winter 2021-09-24 18:02:28 +02:00 committed by GitHub
parent 52dd79691b
commit aec02afcdc
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
76 changed files with 404 additions and 367 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

12
.clang-tidy
View file

@ -135,10 +135,14 @@ CheckOptions:
value: 'UPPER_CASE'
- key: readability-identifier-naming.ParameterCase
value: 'lower_case'
- key: readability-identifier-naming.PrivateMemberPrefix
value: 'NO_PRIVATE_MEMBERS_ALWAYS_USE_PROTECTED'
- key: readability-identifier-naming.PrivateMethodPrefix
value: 'NO_PRIVATE_METHODS_ALWAYS_USE_PROTECTED'
- key: readability-identifier-naming.PrivateMemberCase
value: 'lower_case'
- key: readability-identifier-naming.PrivateMemberSuffix
value: '_'
- key: readability-identifier-naming.PrivateMethodCase
value: 'lower_case'
- key: readability-identifier-naming.PrivateMethodSuffix
value: '_'
- key: readability-identifier-naming.ClassMemberCase
value: 'lower_case'
- key: readability-identifier-naming.ClassMemberCase

4
esphome/components/airthings_wave_plus/airthings_wave_plus.cpp
View file

@ -31,7 +31,7 @@ void AirthingsWavePlus::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt
break;
}
this->handle_ = chr->handle;
this->node_state = esp32_ble_tracker::ClientState::Established;
this->node_state = esp32_ble_tracker::ClientState::ESTABLISHED;
request_read_values_();
break;
@ -99,7 +99,7 @@ bool AirthingsWavePlus::is_valid_co2_value_(uint16_t co2) { return 0 <= co2 && c
void AirthingsWavePlus::loop() {}
void AirthingsWavePlus::update() {
if (this->node_state != esp32_ble_tracker::ClientState::Established) {
if (this->node_state != esp32_ble_tracker::ClientState::ESTABLISHED) {
if (!parent()->enabled) {
ESP_LOGW(TAG, "Reconnecting to device");
parent()->set_enabled(true);

6
esphome/components/am43/am43.cpp
View file

@ -31,7 +31,7 @@ void Am43::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_i
}
case ESP_GATTC_DISCONNECT_EVT: {
this->logged_in_ = false;
this->node_state = espbt::ClientState::Idle;
this->node_state = espbt::ClientState::IDLE;
if (this->battery_ != nullptr)
this->battery_->publish_state(NAN);
if (this->illuminance_ != nullptr)
@ -54,7 +54,7 @@ void Am43::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_i
break;
}
case ESP_GATTC_REG_FOR_NOTIFY_EVT: {
this->node_state = espbt::ClientState::Established;
this->node_state = espbt::ClientState::ESTABLISHED;
this->update();
break;
}
@ -93,7 +93,7 @@ void Am43::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_i
}
void Am43::update() {
if (this->node_state != espbt::ClientState::Established) {
if (this->node_state != espbt::ClientState::ESTABLISHED) {
ESP_LOGW(TAG, "[%s] Cannot poll, not connected", this->parent_->address_str().c_str());
return;
}

6
esphome/components/am43/cover/am43_cover.cpp
View file

@ -24,7 +24,7 @@ void Am43Component::setup() {
}
void Am43Component::loop() {
if (this->node_state == espbt::ClientState::Established && !this->logged_in_) {
if (this->node_state == espbt::ClientState::ESTABLISHED && !this->logged_in_) {
auto packet = this->encoder_->get_send_pin_request(this->pin_);
auto status =
esp_ble_gattc_write_char(this->parent_->gattc_if, this->parent_->conn_id, this->char_handle_, packet->length,
@ -46,7 +46,7 @@ CoverTraits Am43Component::get_traits() {
}
void Am43Component::control(const CoverCall &call) {
if (this->node_state != espbt::ClientState::Established) {
if (this->node_state != espbt::ClientState::ESTABLISHED) {
ESP_LOGW(TAG, "[%s] Cannot send cover control, not connected", this->get_name().c_str());
return;
}
@ -98,7 +98,7 @@ void Am43Component::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_
break;
}
case ESP_GATTC_REG_FOR_NOTIFY_EVT: {
this->node_state = espbt::ClientState::Established;
this->node_state = espbt::ClientState::ESTABLISHED;
break;
}
case ESP_GATTC_NOTIFY_EVT: {

4
esphome/components/anova/anova.cpp
View file

@ -72,7 +72,7 @@ void Anova::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_
break;
}
case ESP_GATTC_REG_FOR_NOTIFY_EVT: {
this->node_state = espbt::ClientState::Established;
this->node_state = espbt::ClientState::ESTABLISHED;
this->current_request_ = 0;
this->update();
break;
@ -129,7 +129,7 @@ void Anova::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_
void Anova::set_unit_of_measurement(const char *unit) { this->fahrenheit_ = !strncmp(unit, "f", 1); }
void Anova::update() {
if (this->node_state != espbt::ClientState::Established)
if (this->node_state != espbt::ClientState::ESTABLISHED)
return;
if (this->current_request_ < 2) {

2
esphome/components/anova/anova.h
View file

@ -27,7 +27,7 @@ class Anova : public climate::Climate, public esphome::ble_client::BLEClientNode
esp_ble_gattc_cb_param_t *param) override;
void dump_config() override;
float get_setup_priority() const override { return setup_priority::DATA; }
climate::ClimateTraits traits() {
climate::ClimateTraits traits() override {
auto traits = climate::ClimateTraits();
traits.set_supports_current_temperature(true);
traits.set_supports_heat_mode(true);

9
esphome/components/api/api_frame_helper.h
View file

@ -1,7 +1,8 @@
#pragma once
#include <cstdint>
#include <vector>
#include <deque>
#include <utility>
#include <vector>
#include "esphome/core/defines.h"
@ -75,8 +76,8 @@ class APIFrameHelper {
class APINoiseFrameHelper : public APIFrameHelper {
public:
APINoiseFrameHelper(std::unique_ptr<socket::Socket> socket, std::shared_ptr<APINoiseContext> ctx)
: socket_(std::move(socket)), ctx_(ctx) {}
~APINoiseFrameHelper();
: socket_(std::move(socket)), ctx_(std::move(std::move(ctx))) {}
~APINoiseFrameHelper() override;
APIError init() override;
APIError loop() override;
APIError read_packet(ReadPacketBuffer *buffer) override;
@ -136,7 +137,7 @@ class APINoiseFrameHelper : public APIFrameHelper {
class APIPlaintextFrameHelper : public APIFrameHelper {
public:
APIPlaintextFrameHelper(std::unique_ptr<socket::Socket> socket) : socket_(std::move(socket)) {}
~APIPlaintextFrameHelper() = default;
~APIPlaintextFrameHelper() override = default;
APIError init() override;
APIError loop() override;
APIError read_packet(ReadPacketBuffer *buffer) override;

2
esphome/components/api/api_noise_context.h
View file

@ -11,7 +11,7 @@ using psk_t = std::array<uint8_t, 32>;
class APINoiseContext {
public:
void set_psk(psk_t psk) { psk_ = std::move(psk); }
void set_psk(psk_t psk) { psk_ = psk; }
const psk_t &get_psk() const { return psk_; }
protected:

2
esphome/components/api/api_server.h
View file

@ -32,7 +32,7 @@ class APIServer : public Component, public Controller {
void set_reboot_timeout(uint32_t reboot_timeout);
#ifdef USE_API_NOISE
void set_noise_psk(psk_t psk) { noise_ctx_->set_psk(std::move(psk)); }
void set_noise_psk(psk_t psk) { noise_ctx_->set_psk(psk); }
std::shared_ptr<APINoiseContext> get_noise_ctx() { return noise_ctx_; }
#endif // USE_API_NOISE

12
esphome/components/atc_mithermometer/atc_mithermometer.cpp
View file

@ -25,14 +25,14 @@ bool ATCMiThermometer::parse_device(const esp32_ble_tracker::ESPBTDevice &device
bool success = false;
for (auto &service_data : device.get_service_datas()) {
auto res = parse_header(service_data);
auto res = parse_header_(service_data);
if (!res.has_value()) {
continue;
}
if (!(parse_message(service_data.data, *res))) {
if (!(parse_message_(service_data.data, *res))) {
continue;
}
if (!(report_results(res, device.address_str()))) {
if (!(report_results_(res, device.address_str()))) {
continue;
}
if (res->temperature.has_value() && this->temperature_ != nullptr)
@ -49,7 +49,7 @@ bool ATCMiThermometer::parse_device(const esp32_ble_tracker::ESPBTDevice &device
return success;
}
optional<ParseResult> ATCMiThermometer::parse_header(const esp32_ble_tracker::ServiceData &service_data) {
optional<ParseResult> ATCMiThermometer::parse_header_(const esp32_ble_tracker::ServiceData &service_data) {
ParseResult result;
if (!service_data.uuid.contains(0x1A, 0x18)) {
ESP_LOGVV(TAG, "parse_header(): no service data UUID magic bytes.");
@ -68,7 +68,7 @@ optional<ParseResult> ATCMiThermometer::parse_header(const esp32_ble_tracker::Se
return result;
}
bool ATCMiThermometer::parse_message(const std::vector<uint8_t> &message, ParseResult &result) {
bool ATCMiThermometer::parse_message_(const std::vector<uint8_t> &message, ParseResult &result) {
// Byte 0-5 mac in correct order
// Byte 6-7 Temperature in uint16
// Byte 8 Humidity in percent
@ -101,7 +101,7 @@ bool ATCMiThermometer::parse_message(const std::vector<uint8_t> &message, ParseR
return true;
}
bool ATCMiThermometer::report_results(const optional<ParseResult> &result, const std::string &address) {
bool ATCMiThermometer::report_results_(const optional<ParseResult> &result, const std::string &address) {
if (!result.has_value()) {
ESP_LOGVV(TAG, "report_results(): no results available.");
return false;

6
esphome/components/atc_mithermometer/atc_mithermometer.h
View file

@ -36,9 +36,9 @@ class ATCMiThermometer : public Component, public esp32_ble_tracker::ESPBTDevice
sensor::Sensor *battery_level_{nullptr};
sensor::Sensor *battery_voltage_{nullptr};
optional<ParseResult> parse_header(const esp32_ble_tracker::ServiceData &service_data);
bool parse_message(const std::vector<uint8_t> &message, ParseResult &result);
bool report_results(const optional<ParseResult> &result, const std::string &address);
optional<ParseResult> parse_header_(const esp32_ble_tracker::ServiceData &service_data);
bool parse_message_(const std::vector<uint8_t> &message, ParseResult &result);
bool report_results_(const optional<ParseResult> &result, const std::string &address);
};
} // namespace atc_mithermometer

10
esphome/components/ble_client/automation.h
View file

@ -11,11 +11,12 @@ class BLEClientConnectTrigger : public Trigger<>, public BLEClientNode {
public:
explicit BLEClientConnectTrigger(BLEClient *parent) { parent->register_ble_node(this); }
void loop() override {}
void gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if, esp_ble_gattc_cb_param_t *param) {
void gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
esp_ble_gattc_cb_param_t *param) override {
if (event == ESP_GATTC_OPEN_EVT && param->open.status == ESP_GATT_OK)
this->trigger();
if (event == ESP_GATTC_SEARCH_CMPL_EVT)
this->node_state = espbt::ClientState::Established;
this->node_state = espbt::ClientState::ESTABLISHED;
}
};
@ -23,11 +24,12 @@ class BLEClientDisconnectTrigger : public Trigger<>, public BLEClientNode {
public:
explicit BLEClientDisconnectTrigger(BLEClient *parent) { parent->register_ble_node(this); }
void loop() override {}
void gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if, esp_ble_gattc_cb_param_t *param) {
void gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
esp_ble_gattc_cb_param_t *param) override {
if (event == ESP_GATTC_DISCONNECT_EVT && memcmp(param->disconnect.remote_bda, this->parent_->remote_bda, 6) == 0)
this->trigger();
if (event == ESP_GATTC_SEARCH_CMPL_EVT)
this->node_state = espbt::ClientState::Established;
this->node_state = espbt::ClientState::ESTABLISHED;
}
};

28
esphome/components/ble_client/ble_client.cpp
View file

@ -17,12 +17,12 @@ void BLEClient::setup() {
ESP_LOGE(TAG, "gattc app register failed. app_id=%d code=%d", this->app_id, ret);
this->mark_failed();
}
this->set_states(espbt::ClientState::Idle);
this->set_states_(espbt::ClientState::IDLE);
this->enabled = true;
}
void BLEClient::loop() {
if (this->state() == espbt::ClientState::Discovered) {
if (this->state() == espbt::ClientState::DISCOVERED) {
this->connect();
}
for (auto *node : this->nodes_)
@ -39,11 +39,11 @@ bool BLEClient::parse_device(const espbt::ESPBTDevice &device) {
return false;
if (device.address_uint64() != this->address)
return false;
if (this->state() != espbt::ClientState::Idle)
if (this->state() != espbt::ClientState::IDLE)
return false;
ESP_LOGD(TAG, "Found device at MAC address [%s]", device.address_str().c_str());
this->set_states(espbt::ClientState::Discovered);
this->set_states_(espbt::ClientState::DISCOVERED);
auto addr = device.address_uint64();
this->remote_bda[0] = (addr >> 40) & 0xFF;
@ -69,7 +69,7 @@ std::string BLEClient::address_str() const {
void BLEClient::set_enabled(bool enabled) {
if (enabled == this->enabled)
return;
if (!enabled && this->state() != espbt::ClientState::Idle) {
if (!enabled && this->state() != espbt::ClientState::IDLE) {
ESP_LOGI(TAG, "[%s] Disabling BLE client.", this->address_str().c_str());
auto ret = esp_ble_gattc_close(this->gattc_if, this->conn_id);
if (ret) {
@ -84,9 +84,9 @@ void BLEClient::connect() {
auto ret = esp_ble_gattc_open(this->gattc_if, this->remote_bda, BLE_ADDR_TYPE_PUBLIC, true);
if (ret) {
ESP_LOGW(TAG, "esp_ble_gattc_open error, address=%s status=%d", this->address_str().c_str(), ret);
this->set_states(espbt::ClientState::Idle);
this->set_states_(espbt::ClientState::IDLE);
} else {
this->set_states(espbt::ClientState::Connecting);
this->set_states_(espbt::ClientState::CONNECTING);
}
}
@ -97,7 +97,7 @@ void BLEClient::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t es
if (event != ESP_GATTC_REG_EVT && esp_gattc_if != ESP_GATT_IF_NONE && esp_gattc_if != this->gattc_if)
return;
bool all_established = this->all_nodes_established();
bool all_established = this->all_nodes_established_();
switch (event) {
case ESP_GATTC_REG_EVT: {
@ -113,7 +113,7 @@ void BLEClient::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t es
ESP_LOGV(TAG, "[%s] ESP_GATTC_OPEN_EVT", this->address_str().c_str());
if (param->open.status != ESP_GATT_OK) {
ESP_LOGW(TAG, "connect to %s failed, status=%d", this->address_str().c_str(), param->open.status);
this->set_states(espbt::ClientState::Idle);
this->set_states_(espbt::ClientState::IDLE);
break;
}
this->conn_id = param->open.conn_id;
@ -126,7 +126,7 @@ void BLEClient::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t es
case ESP_GATTC_CFG_MTU_EVT: {
if (param->cfg_mtu.status != ESP_GATT_OK) {
ESP_LOGW(TAG, "cfg_mtu to %s failed, status %d", this->address_str().c_str(), param->cfg_mtu.status);
this->set_states(espbt::ClientState::Idle);
this->set_states_(espbt::ClientState::IDLE);
break;
}
ESP_LOGV(TAG, "cfg_mtu status %d, mtu %d", param->cfg_mtu.status, param->cfg_mtu.mtu);
@ -141,7 +141,7 @@ void BLEClient::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t es
for (auto &svc : this->services_)
delete svc; // NOLINT(cppcoreguidelines-owning-memory)
this->services_.clear();
this->set_states(espbt::ClientState::Idle);
this->set_states_(espbt::ClientState::IDLE);
break;
}
case ESP_GATTC_SEARCH_RES_EVT: {
@ -160,8 +160,8 @@ void BLEClient::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t es
ESP_LOGI(TAG, " start_handle: 0x%x end_handle: 0x%x", svc->start_handle, svc->end_handle);
svc->parse_characteristics();
}
this->set_states(espbt::ClientState::Connected);
this->set_state(espbt::ClientState::Established);
this->set_states_(espbt::ClientState::CONNECTED);
this->set_state(espbt::ClientState::ESTABLISHED);
break;
}
case ESP_GATTC_REG_FOR_NOTIFY_EVT: {
@ -192,7 +192,7 @@ void BLEClient::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t es
node->gattc_event_handler(event, esp_gattc_if, param);
// Delete characteristics after clients have used them to save RAM.
if (!all_established && this->all_nodes_established()) {
if (!all_established && this->all_nodes_established_()) {
for (auto &svc : this->services_)
delete svc; // NOLINT(cppcoreguidelines-owning-memory)
this->services_.clear();

13
esphome/components/ble_client/ble_client.h
View file

@ -82,10 +82,11 @@ class BLEClient : public espbt::ESPBTClient, public Component {
void dump_config() override;
void loop() override;
void gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if, esp_ble_gattc_cb_param_t *param);
void gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
esp_ble_gattc_cb_param_t *param) override;
bool parse_device(const espbt::ESPBTDevice &device) override;
void on_scan_end() override {}
void connect();
void connect() override;
void set_address(uint64_t address) { this->address = address; }
@ -116,16 +117,16 @@ class BLEClient : public espbt::ESPBTClient, public Component {
std::string address_str() const;
protected:
void set_states(espbt::ClientState st) {
void set_states_(espbt::ClientState st) {
this->set_state(st);
for (auto &node : nodes_)
node->node_state = st;
}
bool all_nodes_established() {
if (this->state() != espbt::ClientState::Established)
bool all_nodes_established_() {
if (this->state() != espbt::ClientState::ESTABLISHED)
return false;
for (auto &node : nodes_)
if (node->node_state != espbt::ClientState::Established)
if (node->node_state != espbt::ClientState::ESTABLISHED)
return false;
return true;
}

5
esphome/components/ble_client/sensor/automation.h
View file

@ -11,10 +11,11 @@ namespace ble_client {
class BLESensorNotifyTrigger : public Trigger<float>, public BLESensor {
public:
explicit BLESensorNotifyTrigger(BLESensor *sensor) { sensor_ = sensor; }
void gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if, esp_ble_gattc_cb_param_t *param) {
void gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
esp_ble_gattc_cb_param_t *param) override {
switch (event) {
case ESP_GATTC_SEARCH_CMPL_EVT: {
this->sensor_->node_state = espbt::ClientState::Established;
this->sensor_->node_state = espbt::ClientState::ESTABLISHED;
break;
}
case ESP_GATTC_NOTIFY_EVT: {

12
esphome/components/ble_client/sensor/ble_sensor.cpp
View file

@ -71,7 +71,7 @@ void BLESensor::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t ga
ESP_LOGW(TAG, "esp_ble_gattc_register_for_notify failed, status=%d", status);
}
} else {
this->node_state = espbt::ClientState::Established;
this->node_state = espbt::ClientState::ESTABLISHED;
}
break;
}
@ -84,7 +84,7 @@ void BLESensor::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t ga
}
if (param->read.handle == this->handle) {
this->status_clear_warning();
this->publish_state(this->parse_data(param->read.value, param->read.value_len));
this->publish_state(this->parse_data_(param->read.value, param->read.value_len));
}
break;
}
@ -93,11 +93,11 @@ void BLESensor::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t ga
break;
ESP_LOGV(TAG, "[%s] ESP_GATTC_NOTIFY_EVT: handle=0x%x, value=0x%x", this->get_name().c_str(),
param->notify.handle, param->notify.value[0]);
this->publish_state(this->parse_data(param->notify.value, param->notify.value_len));
this->publish_state(this->parse_data_(param->notify.value, param->notify.value_len));
break;
}
case ESP_GATTC_REG_FOR_NOTIFY_EVT: {
this->node_state = espbt::ClientState::Established;
this->node_state = espbt::ClientState::ESTABLISHED;
break;
}
default:
@ -105,7 +105,7 @@ void BLESensor::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t ga
}
}
float BLESensor::parse_data(uint8_t *value, uint16_t value_len) {
float BLESensor::parse_data_(uint8_t *value, uint16_t value_len) {
if (this->data_to_value_func_.has_value()) {
std::vector<uint8_t> data(value, value + value_len);
return (*this->data_to_value_func_)(data);
@ -115,7 +115,7 @@ float BLESensor::parse_data(uint8_t *value, uint16_t value_len) {
}
void BLESensor::update() {
if (this->node_state != espbt::ClientState::Established) {
if (this->node_state != espbt::ClientState::ESTABLISHED) {
ESP_LOGW(TAG, "[%s] Cannot poll, not connected", this->get_name().c_str());
return;
}

4
esphome/components/ble_client/sensor/ble_sensor.h
View file

@ -32,13 +32,13 @@ class BLESensor : public sensor::Sensor, public PollingComponent, public BLEClie
void set_descr_uuid16(uint16_t uuid) { this->descr_uuid_ = espbt::ESPBTUUID::from_uint16(uuid); }
void set_descr_uuid32(uint32_t uuid) { this->descr_uuid_ = espbt::ESPBTUUID::from_uint32(uuid); }
void set_descr_uuid128(uint8_t *uuid) { this->descr_uuid_ = espbt::ESPBTUUID::from_raw(uuid); }
void set_data_to_value(data_to_value_t &&lambda_) { this->data_to_value_func_ = lambda_; }
void set_data_to_value(data_to_value_t &&lambda) { this->data_to_value_func_ = lambda; }
void set_enable_notify(bool notify) { this->notify_ = notify; }
uint16_t handle;
protected:
uint32_t hash_base() override;
float parse_data(uint8_t *value, uint16_t value_len);
float parse_data_(uint8_t *value, uint16_t value_len);
optional<data_to_value_t> data_to_value_func_{};
bool notify_;
espbt::ESPBTUUID service_uuid_;

4
esphome/components/ble_client/switch/ble_switch.cpp
View file

@ -21,10 +21,10 @@ void BLEClientSwitch::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_i
this->publish_state(this->parent_->enabled);
break;
case ESP_GATTC_OPEN_EVT:
this->node_state = espbt::ClientState::Established;
this->node_state = espbt::ClientState::ESTABLISHED;
break;
case ESP_GATTC_DISCONNECT_EVT:
this->node_state = espbt::ClientState::Idle;
this->node_state = espbt::ClientState::IDLE;
this->publish_state(this->parent_->enabled);
break;
default:

4
esphome/components/ble_presence/ble_presence_device.h
View file

@ -93,8 +93,8 @@ class BLEPresenceDevice : public binary_sensor::BinarySensorInitiallyOff,
float get_setup_priority() const override { return setup_priority::DATA; }
protected:
enum MATCH_TYPE { MATCH_BY_MAC_ADDRESS, MATCH_BY_SERVICE_UUID, MATCH_BY_IBEACON_UUID };
MATCH_TYPE match_by_;
enum MatchType { MATCH_BY_MAC_ADDRESS, MATCH_BY_SERVICE_UUID, MATCH_BY_IBEACON_UUID };
MatchType match_by_;
bool found_{false};

2
esphome/components/ble_scanner/ble_scanner.h
View file

@ -15,7 +15,7 @@ namespace ble_scanner {
class BLEScanner : public text_sensor::TextSensor, public esp32_ble_tracker::ESPBTDeviceListener, public Component {
public:
bool parse_device(const esp32_ble_tracker::ESPBTDevice &device) override {
this->publish_state("{\"timestamp\":" + to_string(::time(NULL)) +
this->publish_state("{\"timestamp\":" + to_string(::time(nullptr)) +
","
"\"address\":\"" +
device.address_str() +

18
esphome/components/daly_bms/daly_bms.cpp
View file

@ -26,25 +26,25 @@ void DalyBmsComponent::dump_config() {
}
void DalyBmsComponent::update() {
this->request_data(DALY_REQUEST_BATTERY_LEVEL);
this->request_data(DALY_REQUEST_MIN_MAX_VOLTAGE);
this->request_data(DALY_REQUEST_MIN_MAX_TEMPERATURE);
this->request_data(DALY_REQUEST_MOS);
this->request_data(DALY_REQUEST_STATUS);
this->request_data(DALY_REQUEST_TEMPERATURE);
this->request_data_(DALY_REQUEST_BATTERY_LEVEL);
this->request_data_(DALY_REQUEST_MIN_MAX_VOLTAGE);
this->request_data_(DALY_REQUEST_MIN_MAX_TEMPERATURE);
this->request_data_(DALY_REQUEST_MOS);
this->request_data_(DALY_REQUEST_STATUS);
this->request_data_(DALY_REQUEST_TEMPERATURE);
std::vector<uint8_t> get_battery_level_data;
int available_data = this->available();
if (available_data >= DALY_FRAME_SIZE) {
get_battery_level_data.resize(available_data);
this->read_array(get_battery_level_data.data(), available_data);
this->decode_data(get_battery_level_data);
this->decode_data_(get_battery_level_data);
}
}
float DalyBmsComponent::get_setup_priority() const { return setup_priority::DATA; }
void DalyBmsComponent::request_data(uint8_t data_id) {
void DalyBmsComponent::request_data_(uint8_t data_id) {
uint8_t request_message[DALY_FRAME_SIZE];
request_message[0] = 0xA5; // Start Flag
@ -66,7 +66,7 @@ void DalyBmsComponent::request_data(uint8_t data_id) {
this->flush();
}
void DalyBmsComponent::decode_data(std::vector<uint8_t> data) {
void DalyBmsComponent::decode_data_(std::vector<uint8_t> data) {
auto it = data.begin();
while ((it = std::find(it, data.end(), 0xA5)) != data.end()) {

4
esphome/components/daly_bms/daly_bms.h
View file

@ -54,8 +54,8 @@ class DalyBmsComponent : public PollingComponent, public uart::UARTDevice {
float get_setup_priority() const override;
protected:
void request_data(uint8_t data_id);
void decode_data(std::vector<uint8_t> data);
void request_data_(uint8_t data_id);
void decode_data_(std::vector<uint8_t> data);
sensor::Sensor *voltage_sensor_{nullptr};
sensor::Sensor *current_sensor_{nullptr};

2
esphome/components/esp32/gpio_arduino.cpp
View file

@ -21,7 +21,7 @@ ISRInternalGPIOPin ArduinoInternalGPIOPin::to_isr() const {
return ISRInternalGPIOPin((void *) arg);
}
void ArduinoInternalGPIOPin::attach_interrupt_(void (*func)(void *), void *arg, gpio::InterruptType type) const {
void ArduinoInternalGPIOPin::attach_interrupt(void (*func)(void *), void *arg, gpio::InterruptType type) const {
uint8_t arduino_mode = DISABLED;
switch (type) {
case gpio::INTERRUPT_RISING_EDGE:

2
esphome/components/esp32/gpio_arduino.h
View file

@ -23,7 +23,7 @@ class ArduinoInternalGPIOPin : public InternalGPIOPin {
bool is_inverted() const override { return inverted_; }
protected:
void attach_interrupt_(void (*func)(void *), void *arg, gpio::InterruptType type) const override;
void attach_interrupt(void (*func)(void *), void *arg, gpio::InterruptType type) const override;
uint8_t pin_;
bool inverted_;

2
esphome/components/esp32/gpio_idf.cpp
View file

@ -8,7 +8,7 @@ namespace esp32 {
static const char *const TAG = "esp32";
bool IDFInternalGPIOPin::isr_service_installed_ = false; // NOLINT(cppcoreguidelines-avoid-non-const-global-variables)
bool IDFInternalGPIOPin::isr_service_installed = false; // NOLINT(cppcoreguidelines-avoid-non-const-global-variables)
struct ISRPinArg {
gpio_num_t pin;

13
esphome/components/esp32/gpio_idf.h
View file

@ -21,7 +21,7 @@ class IDFInternalGPIOPin : public InternalGPIOPin {
void pin_mode(gpio::Flags flags) override {
gpio_config_t conf{};
conf.pin_bit_mask = 1ULL << static_cast<uint32_t>(pin_);
conf.mode = flags_to_mode_(flags);
conf.mode = flags_to_mode(flags);
conf.pull_up_en = flags & gpio::FLAG_PULLUP ? GPIO_PULLUP_ENABLE : GPIO_PULLUP_DISABLE;
conf.pull_down_en = flags & gpio::FLAG_PULLDOWN ? GPIO_PULLDOWN_ENABLE : GPIO_PULLDOWN_DISABLE;
conf.intr_type = GPIO_INTR_DISABLE;
@ -36,7 +36,7 @@ class IDFInternalGPIOPin : public InternalGPIOPin {
bool is_inverted() const override { return inverted_; }
protected:
static gpio_mode_t flags_to_mode_(gpio::Flags flags) {
static gpio_mode_t flags_to_mode(gpio::Flags flags) {
flags = (gpio::Flags)(flags & ~(gpio::FLAG_PULLUP | gpio::FLAG_PULLDOWN));
if (flags == gpio::FLAG_NONE) {
return GPIO_MODE_DISABLE;
@ -55,7 +55,7 @@ class IDFInternalGPIOPin : public InternalGPIOPin {
return GPIO_MODE_DISABLE;
}
}
void attach_interrupt_(void (*func)(void *), void *arg, gpio::InterruptType type) const override {
void attach_interrupt(void (*func)(void *), void *arg, gpio::InterruptType type) const override {
gpio_int_type_t idf_type = GPIO_INTR_ANYEDGE;
switch (type) {
case gpio::INTERRUPT_RISING_EDGE:
@ -76,9 +76,9 @@ class IDFInternalGPIOPin : public InternalGPIOPin {
}
gpio_set_intr_type(pin_, idf_type);
gpio_intr_enable(pin_);
if (!isr_service_installed_) {
if (!isr_service_installed) {
gpio_install_isr_service(ESP_INTR_FLAG_LEVEL5);
isr_service_installed_ = true;
isr_service_installed = true;
}
gpio_isr_handler_add(pin_, func, arg);
}
@ -87,7 +87,8 @@ class IDFInternalGPIOPin : public InternalGPIOPin {
bool inverted_;
gpio_drive_cap_t drive_strength_;
gpio::Flags flags_;
static bool isr_service_installed_;
// NOLINTNEXTLINE(cppcoreguidelines-avoid-non-const-global-variables)
static bool isr_service_installed;
};
} // namespace esp32

2
esphome/components/esp32_ble/ble.h
View file

@ -19,6 +19,7 @@
namespace esphome {
namespace esp32_ble {
// NOLINTNEXTLINE(modernize-use-using)
typedef struct {
void *peer_device;
bool connected;
@ -65,6 +66,7 @@ class ESP32BLE : public Component {
BLEAdvertising *advertising_;
};
// NOLINTNEXTLINE(cppcoreguidelines-avoid-non-const-global-variables)
extern ESP32BLE *global_ble;
} // namespace esp32_ble

26
esphome/components/esp32_ble/queue.h
View file

@ -28,33 +28,33 @@ namespace esp32_ble {
template<class T> class Queue {
public:
Queue() { m = xSemaphoreCreateMutex(); }
Queue() { m_ = xSemaphoreCreateMutex(); }
void push(T *element) {
if (element == nullptr)
return;
if (xSemaphoreTake(m, 5L / portTICK_PERIOD_MS)) {
q.push(element);
xSemaphoreGive(m);
if (xSemaphoreTake(m_, 5L / portTICK_PERIOD_MS)) {
q_.push(element);
xSemaphoreGive(m_);
}
}
T *pop() {
T *element = nullptr;
if (xSemaphoreTake(m, 5L / portTICK_PERIOD_MS)) {
if (!q.empty()) {
element = q.front();
q.pop();
if (xSemaphoreTake(m_, 5L / portTICK_PERIOD_MS)) {
if (!q_.empty()) {
element = q_.front();
q_.pop();
}
xSemaphoreGive(m);
xSemaphoreGive(m_);
}
return element;
}
protected:
std::queue<T *> q;
SemaphoreHandle_t m;
std::queue<T *> q_;
SemaphoreHandle_t m_;
};
// Received GAP, GATTC and GATTS events are only queued, and get processed in the main loop().
@ -105,11 +105,13 @@ class BLEEvent {
};
union {
// NOLINTNEXTLINE(readability-identifier-naming)
struct gap_event {
esp_gap_ble_cb_event_t gap_event;
esp_ble_gap_cb_param_t gap_param;
} gap;
// NOLINTNEXTLINE(readability-identifier-naming)
struct gattc_event {
esp_gattc_cb_event_t gattc_event;
esp_gatt_if_t gattc_if;
@ -117,6 +119,7 @@ class BLEEvent {
uint8_t data[64];
} gattc;
// NOLINTNEXTLINE(readability-identifier-naming)
struct gatts_event {
esp_gatts_cb_event_t gatts_event;
esp_gatt_if_t gatts_if;
@ -124,6 +127,7 @@ class BLEEvent {
uint8_t data[64];
} gatts;
} event_;
// NOLINTNEXTLINE(readability-identifier-naming)
enum ble_event_t : uint8_t {
GAP,
GATTC,

4
esphome/components/esp32_ble_beacon/esp32_ble_beacon.h
View file

@ -9,6 +9,7 @@
namespace esphome {
namespace esp32_ble_beacon {
// NOLINTNEXTLINE(modernize-use-using)
typedef struct {
uint8_t flags[3];
uint8_t length;
@ -17,6 +18,7 @@ typedef struct {
uint16_t beacon_type;
} __attribute__((packed)) esp_ble_ibeacon_head_t;
// NOLINTNEXTLINE(modernize-use-using)
typedef struct {
uint8_t proximity_uuid[16];
uint16_t major;
@ -24,6 +26,7 @@ typedef struct {
uint8_t measured_power;
} __attribute__((packed)) esp_ble_ibeacon_vendor_t;
// NOLINTNEXTLINE(modernize-use-using)
typedef struct {
esp_ble_ibeacon_head_t ibeacon_head;
esp_ble_ibeacon_vendor_t ibeacon_vendor;
@ -50,6 +53,7 @@ class ESP32BLEBeacon : public Component {
uint16_t minor_{};
};
// NOLINTNEXTLINE(cppcoreguidelines-avoid-non-const-global-variables)
extern ESP32BLEBeacon *global_esp32_ble_beacon;
} // namespace esp32_ble_beacon

4
esphome/components/esp32_ble_server/ble_characteristic.h
View file

@ -24,7 +24,7 @@ class BLEService;
class BLECharacteristic {
public:
BLECharacteristic(const ESPBTUUID uuid, uint32_t properties);
BLECharacteristic(ESPBTUUID uuid, uint32_t properties);
void set_value(const uint8_t *data, size_t length);
void set_value(std::vector<uint8_t> value);
@ -49,7 +49,7 @@ class BLECharacteristic {
void do_create(BLEService *service);
void gatts_event_handler(esp_gatts_cb_event_t event, esp_gatt_if_t gatts_if, esp_ble_gatts_cb_param_t *param);
void on_write(const std::function<void(const std::vector<uint8_t> &)> &&func) { this->on_write_ = std::move(func); }
void on_write(const std::function<void(const std::vector<uint8_t> &)> &&func) { this->on_write_ = func; }
void add_descriptor(BLEDescriptor *descriptor);

1
esphome/components/esp32_ble_server/ble_server.h
View file

@ -87,6 +87,7 @@ class BLEServer : public Component {
} state_{INIT};
};
// NOLINTNEXTLINE(cppcoreguidelines-avoid-non-const-global-variables)
extern BLEServer *global_ble_server;
} // namespace esp32_ble_server

38
esphome/components/esp32_ble_tracker/esp32_ble_tracker.cpp
View file

@ -50,29 +50,29 @@ void ESP32BLETracker::setup() {
return;
}
global_esp32_ble_tracker->start_scan(true);
global_esp32_ble_tracker->start_scan_(true);
}
void ESP32BLETracker::loop() {
BLEEvent *ble_event = this->ble_events_.pop();
while (ble_event != nullptr) {
if (ble_event->type_)
this->real_gattc_event_handler(ble_event->event_.gattc.gattc_event, ble_event->event_.gattc.gattc_if,
&ble_event->event_.gattc.gattc_param);
this->real_gattc_event_handler_(ble_event->event_.gattc.gattc_event, ble_event->event_.gattc.gattc_if,
&ble_event->event_.gattc.gattc_param);
else
this->real_gap_event_handler(ble_event->event_.gap.gap_event, &ble_event->event_.gap.gap_param);
this->real_gap_event_handler_(ble_event->event_.gap.gap_event, &ble_event->event_.gap.gap_param);
delete ble_event; // NOLINT(cppcoreguidelines-owning-memory)
ble_event = this->ble_events_.pop();
}
bool connecting = false;
for (auto *client : this->clients_) {
if (client->state() == ClientState::Connecting || client->state() == ClientState::Discovered)
if (client->state() == ClientState::CONNECTING || client->state() == ClientState::DISCOVERED)
connecting = true;
}
if (!connecting && xSemaphoreTake(this->scan_end_lock_, 0L)) {
xSemaphoreGive(this->scan_end_lock_);
global_esp32_ble_tracker->start_scan(false);
global_esp32_ble_tracker->start_scan_(false);
}
if (xSemaphoreTake(this->scan_result_lock_, 5L / portTICK_PERIOD_MS)) {
@ -94,7 +94,7 @@ void ESP32BLETracker::loop() {
for (auto *client : this->clients_)
if (client->parse_device(device)) {
found = true;
if (client->state() == ClientState::Discovered) {
if (client->state() == ClientState::DISCOVERED) {
esp_ble_gap_stop_scanning();
if (xSemaphoreTake(this->scan_end_lock_, 10L / portTICK_PERIOD_MS)) {
xSemaphoreGive(this->scan_end_lock_);
@ -196,7 +196,7 @@ bool ESP32BLETracker::ble_setup() {
return true;
}
void ESP32BLETracker::start_scan(bool first) {
void ESP32BLETracker::start_scan_(bool first) {
if (!xSemaphoreTake(this->scan_end_lock_, 0L)) {
ESP_LOGW(TAG, "Cannot start scan!");
return;
@ -233,38 +233,38 @@ void ESP32BLETracker::gap_event_handler(esp_gap_ble_cb_event_t event, esp_ble_ga
global_esp32_ble_tracker->ble_events_.push(gap_event);
} // NOLINT(clang-analyzer-cplusplus.NewDeleteLeaks)
void ESP32BLETracker::real_gap_event_handler(esp_gap_ble_cb_event_t event, esp_ble_gap_cb_param_t *param) {
void ESP32BLETracker::real_gap_event_handler_(esp_gap_ble_cb_event_t event, esp_ble_gap_cb_param_t *param) {
switch (event) {
case ESP_GAP_BLE_SCAN_RESULT_EVT:
global_esp32_ble_tracker->gap_scan_result(param->scan_rst);
global_esp32_ble_tracker->gap_scan_result_(param->scan_rst);
break;
case ESP_GAP_BLE_SCAN_PARAM_SET_COMPLETE_EVT:
global_esp32_ble_tracker->gap_scan_set_param_complete(param->scan_param_cmpl);
global_esp32_ble_tracker->gap_scan_set_param_complete_(param->scan_param_cmpl);
break;
case ESP_GAP_BLE_SCAN_START_COMPLETE_EVT:
global_esp32_ble_tracker->gap_scan_start_complete(param->scan_start_cmpl);
global_esp32_ble_tracker->gap_scan_start_complete_(param->scan_start_cmpl);
break;
case ESP_GAP_BLE_SCAN_STOP_COMPLETE_EVT:
global_esp32_ble_tracker->gap_scan_stop_complete(param->scan_stop_cmpl);
global_esp32_ble_tracker->gap_scan_stop_complete_(param->scan_stop_cmpl);
break;
default:
break;
}
}
void ESP32BLETracker::gap_scan_set_param_complete(const esp_ble_gap_cb_param_t::ble_scan_param_cmpl_evt_param &param) {
void ESP32BLETracker::gap_scan_set_param_complete_(const esp_ble_gap_cb_param_t::ble_scan_param_cmpl_evt_param &param) {
this->scan_set_param_failed_ = param.status;
}
void ESP32BLETracker::gap_scan_start_complete(const esp_ble_gap_cb_param_t::ble_scan_start_cmpl_evt_param &param) {
void ESP32BLETracker::gap_scan_start_complete_(const esp_ble_gap_cb_param_t::ble_scan_start_cmpl_evt_param &param) {
this->scan_start_failed_ = param.status;
}
void ESP32BLETracker::gap_scan_stop_complete(const esp_ble_gap_cb_param_t::ble_scan_stop_cmpl_evt_param &param) {
void ESP32BLETracker::gap_scan_stop_complete_(const esp_ble_gap_cb_param_t::ble_scan_stop_cmpl_evt_param &param) {
xSemaphoreGive(this->scan_end_lock_);
}
void ESP32BLETracker::gap_scan_result(const esp_ble_gap_cb_param_t::ble_scan_result_evt_param &param) {
void ESP32BLETracker::gap_scan_result_(const esp_ble_gap_cb_param_t::ble_scan_result_evt_param &param) {
if (param.search_evt == ESP_GAP_SEARCH_INQ_RES_EVT) {
if (xSemaphoreTake(this->scan_result_lock_, 0L)) {
if (this->scan_result_index_ < 16) {
@ -283,8 +283,8 @@ void ESP32BLETracker::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_i
global_esp32_ble_tracker->ble_events_.push(gattc_event);
} // NOLINT(clang-analyzer-cplusplus.NewDeleteLeaks)
void ESP32BLETracker::real_gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
esp_ble_gattc_cb_param_t *param) {
void ESP32BLETracker::real_gattc_event_handler_(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
esp_ble_gattc_cb_param_t *param) {
for (auto *client : global_esp32_ble_tracker->clients_) {
client->gattc_event_handler(event, gattc_if, param);
}

25
esphome/components/esp32_ble_tracker/esp32_ble_tracker.h
View file

@ -135,15 +135,15 @@ class ESPBTDeviceListener {
enum class ClientState {
// Connection is idle, no device detected.
Idle,
IDLE,
// Device advertisement found.
Discovered,
DISCOVERED,
// Connection in progress.
Connecting,
CONNECTING,
// Initial connection established.
Connected,
CONNECTED,
// The client and sub-clients have completed setup.
Established,
ESTABLISHED,
};
class ESPBTClient : public ESPBTDeviceListener {
@ -185,23 +185,23 @@ class ESP32BLETracker : public Component {
/// The FreeRTOS task managing the bluetooth interface.
static bool ble_setup();
/// Start a single scan by setting up the parameters and doing some esp-idf calls.
void start_scan(bool first);
void start_scan_(bool first);
/// Callback that will handle all GAP events and redistribute them to other callbacks.
static void gap_event_handler(esp_gap_ble_cb_event_t event, esp_ble_gap_cb_param_t *param);
void real_gap_event_handler(esp_gap_ble_cb_event_t event, esp_ble_gap_cb_param_t *param);
void real_gap_event_handler_(esp_gap_ble_cb_event_t event, esp_ble_gap_cb_param_t *param);
/// Called when a `ESP_GAP_BLE_SCAN_RESULT_EVT` event is received.
void gap_scan_result(const esp_ble_gap_cb_param_t::ble_scan_result_evt_param &param);
void gap_scan_result_(const esp_ble_gap_cb_param_t::ble_scan_result_evt_param &param);
/// Called when a `ESP_GAP_BLE_SCAN_PARAM_SET_COMPLETE_EVT` event is received.
void gap_scan_set_param_complete(const esp_ble_gap_cb_param_t::ble_scan_param_cmpl_evt_param &param);
void gap_scan_set_param_complete_(const esp_ble_gap_cb_param_t::ble_scan_param_cmpl_evt_param &param);
/// Called when a `ESP_GAP_BLE_SCAN_START_COMPLETE_EVT` event is received.
void gap_scan_start_complete(const esp_ble_gap_cb_param_t::ble_scan_start_cmpl_evt_param &param);
void gap_scan_start_complete_(const esp_ble_gap_cb_param_t::ble_scan_start_cmpl_evt_param &param);
/// Called when a `ESP_GAP_BLE_SCAN_STOP_COMPLETE_EVT` event is received.
void gap_scan_stop_complete(const esp_ble_gap_cb_param_t::ble_scan_stop_cmpl_evt_param &param);
void gap_scan_stop_complete_(const esp_ble_gap_cb_param_t::ble_scan_stop_cmpl_evt_param &param);
int app_id_;
/// Callback that will handle all GATTC events and redistribute them to other callbacks.
static void gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if, esp_ble_gattc_cb_param_t *param);
void real_gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if, esp_ble_gattc_cb_param_t *param);
void real_gattc_event_handler_(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if, esp_ble_gattc_cb_param_t *param);
/// Vector of addresses that have already been printed in print_bt_device_info
std::vector<uint64_t> already_discovered_;
@ -225,6 +225,7 @@ class ESP32BLETracker : public Component {
Queue<BLEEvent> ble_events_;
};
// NOLINTNEXTLINE
extern ESP32BLETracker *global_esp32_ble_tracker;
} // namespace esp32_ble_tracker

26
esphome/components/esp32_ble_tracker/queue.h
View file

@ -26,33 +26,33 @@ namespace esp32_ble_tracker {
template<class T> class Queue {
public:
Queue() { m = xSemaphoreCreateMutex(); }
Queue() { m_ = xSemaphoreCreateMutex(); }
void push(T *element) {
if (element == nullptr)
return;
if (xSemaphoreTake(m, 5L / portTICK_PERIOD_MS)) {
q.push(element);
xSemaphoreGive(m);
if (xSemaphoreTake(m_, 5L / portTICK_PERIOD_MS)) {
q_.push(element);
xSemaphoreGive(m_);
}
}
T *pop() {
T *element = nullptr;
if (xSemaphoreTake(m, 5L / portTICK_PERIOD_MS)) {
if (!q.empty()) {
element = q.front();
q.pop();
if (xSemaphoreTake(m_, 5L / portTICK_PERIOD_MS)) {
if (!q_.empty()) {
element = q_.front();
q_.pop();
}
xSemaphoreGive(m);
xSemaphoreGive(m_);
}
return element;
}
protected:
std::queue<T *> q;
SemaphoreHandle_t m;
std::queue<T *> q_;
SemaphoreHandle_t m_;
};
// Received GAP and GATTC events are only queued, and get processed in the main loop().
@ -87,12 +87,12 @@ class BLEEvent {
};
union {
struct gap_event {
struct gap_event { // NOLINT(readability-identifier-naming)
esp_gap_ble_cb_event_t gap_event;
esp_ble_gap_cb_param_t gap_param;
} gap;
struct gattc_event {
struct gattc_event { // NOLINT(readability-identifier-naming)
esp_gattc_cb_event_t gattc_event;
esp_gatt_if_t gattc_if;
esp_ble_gattc_cb_param_t gattc_param;

1
esphome/components/esp32_camera/esp32_camera.h
View file

@ -106,6 +106,7 @@ class ESP32Camera : public Component, public Nameable {
uint32_t last_update_{0};
};
// NOLINTNEXTLINE(cppcoreguidelines-avoid-non-const-global-variables)
extern ESP32Camera *global_esp32_camera;
} // namespace esp32_camera

4
esphome/components/esp32_improv/esp32_improv_component.cpp
View file

@ -126,7 +126,7 @@ void ESP32ImprovComponent::loop() {
std::string url = "https://my.home-assistant.io/redirect/config_flow_start?domain=esphome";
std::vector<uint8_t> data = improv::build_rpc_response(improv::WIFI_SETTINGS, {url});
this->send_response(data);
this->send_response_(data);
this->set_timeout("end-service", 1000, [this] {
this->service_->stop();
this->set_state_(improv::STATE_STOPPED);
@ -181,7 +181,7 @@ void ESP32ImprovComponent::set_error_(improv::Error error) {
}
}
void ESP32ImprovComponent::send_response(std::vector<uint8_t> &response) {
void ESP32ImprovComponent::send_response_(std::vector<uint8_t> &response) {
this->rpc_response_->set_value(response);
if (this->state_ != improv::STATE_STOPPED)
this->rpc_response_->notify();

3
esphome/components/esp32_improv/esp32_improv_component.h
View file

@ -63,12 +63,13 @@ class ESP32ImprovComponent : public Component, public BLEServiceComponent {
void set_state_(improv::State state);
void set_error_(improv::Error error);
void send_response(std::vector<uint8_t> &response);
void send_response_(std::vector<uint8_t> &response);
void process_incoming_data_();
void on_wifi_connect_timeout_();
bool check_identify_();
};
// NOLINTNEXTLINE(cppcoreguidelines-avoid-non-const-global-variables)
extern ESP32ImprovComponent *global_improv_component;
} // namespace esp32_improv

2
esphome/components/esp8266/gpio.cpp
View file

@ -20,7 +20,7 @@ ISRInternalGPIOPin ESP8266GPIOPin::to_isr() const {
return ISRInternalGPIOPin((void *) arg);
}
void ESP8266GPIOPin::attach_interrupt_(void (*func)(void *), void *arg, gpio::InterruptType type) const {
void ESP8266GPIOPin::attach_interrupt(void (*func)(void *), void *arg, gpio::InterruptType type) const {
uint8_t arduino_mode = 0;
switch (type) {
case gpio::INTERRUPT_RISING_EDGE:

2
esphome/components/esp8266/gpio.h
View file

@ -25,7 +25,7 @@ class ESP8266GPIOPin : public InternalGPIOPin {
bool is_inverted() const override { return inverted_; }
protected:
void attach_interrupt_(void (*func)(void *), void *arg, gpio::InterruptType type) const override;
void attach_interrupt(void (*func)(void *), void *arg, gpio::InterruptType type) const override;
uint8_t pin_;
bool inverted_;

28
esphome/components/ethernet/ethernet_component.cpp
View file

@ -45,11 +45,11 @@ void EthernetComponent::setup() {
switch (this->type_) {
case ETHERNET_TYPE_LAN8720: {
memcpy(&this->eth_config, &phy_lan8720_default_ethernet_config, sizeof(eth_config_t));
memcpy(&this->eth_config_, &phy_lan8720_default_ethernet_config, sizeof(eth_config_t));
break;
}
case ETHERNET_TYPE_TLK110: {
memcpy(&this->eth_config, &phy_tlk110_default_ethernet_config, sizeof(eth_config_t));
memcpy(&this->eth_config_, &phy_tlk110_default_ethernet_config, sizeof(eth_config_t));
break;
}
default: {
@ -58,20 +58,20 @@ void EthernetComponent::setup() {
}
}
this->eth_config.phy_addr = static_cast<eth_phy_base_t>(this->phy_addr_);
this->eth_config.clock_mode = this->clk_mode_;
this->eth_config.gpio_config = EthernetComponent::eth_phy_config_gpio_;
this->eth_config.tcpip_input = tcpip_adapter_eth_input;
this->eth_config_.phy_addr = static_cast<eth_phy_base_t>(this->phy_addr_);
this->eth_config_.clock_mode = this->clk_mode_;
this->eth_config_.gpio_config = EthernetComponent::eth_phy_config_gpio;
this->eth_config_.tcpip_input = tcpip_adapter_eth_input;
if (this->power_pin_ != nullptr) {
this->orig_power_enable_fun_ = this->eth_config.phy_power_enable;
this->eth_config.phy_power_enable = EthernetComponent::eth_phy_power_enable_;
this->orig_power_enable_fun_ = this->eth_config_.phy_power_enable;
this->eth_config_.phy_power_enable = EthernetComponent::eth_phy_power_enable;
}
tcpipInit();
esp_err_t err;
err = esp_eth_init(&this->eth_config);
err = esp_eth_init(&this->eth_config_);
ESPHL_ERROR_CHECK(err, "ETH init error");
err = esp_eth_enable();
ESPHL_ERROR_CHECK(err, "ETH enable error");
@ -209,11 +209,11 @@ void EthernetComponent::start_connect_() {
this->connect_begin_ = millis();
this->status_set_warning();
}
void EthernetComponent::eth_phy_config_gpio_() {
void EthernetComponent::eth_phy_config_gpio() {
phy_rmii_configure_data_interface_pins();
phy_rmii_smi_configure_pins(global_eth_component->mdc_pin_, global_eth_component->mdio_pin_);
}
void EthernetComponent::eth_phy_power_enable_(bool enable) {
void EthernetComponent::eth_phy_power_enable(bool enable) {
global_eth_component->power_pin_->digital_write(enable);
// power up takes some time, datasheet says max 300µs
delay(1);
@ -242,9 +242,9 @@ void EthernetComponent::dump_connect_params_() {
uint8_t mac[6];
esp_eth_get_mac(mac);
ESP_LOGCONFIG(TAG, " MAC Address: %02X:%02X:%02X:%02X:%02X:%02X", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
ESP_LOGCONFIG(TAG, " Is Full Duplex: %s", YESNO(this->eth_config.phy_get_duplex_mode()));
ESP_LOGCONFIG(TAG, " Link Up: %s", YESNO(this->eth_config.phy_check_link()));
ESP_LOGCONFIG(TAG, " Link Speed: %u", this->eth_config.phy_get_speed_mode() ? 100 : 10);
ESP_LOGCONFIG(TAG, " Is Full Duplex: %s", YESNO(this->eth_config_.phy_get_duplex_mode()));
ESP_LOGCONFIG(TAG, " Link Up: %s", YESNO(this->eth_config_.phy_check_link()));
ESP_LOGCONFIG(TAG, " Link Speed: %u", this->eth_config_.phy_get_speed_mode() ? 100 : 10);
}
void EthernetComponent::set_phy_addr(uint8_t phy_addr) { this->phy_addr_ = phy_addr; }
void EthernetComponent::set_power_pin(GPIOPin *power_pin) { this->power_pin_ = power_pin; }

7
esphome/components/ethernet/ethernet_component.h
View file

@ -60,8 +60,8 @@ class EthernetComponent : public Component {
void start_connect_();
void dump_connect_params_();
static void eth_phy_config_gpio_();
static void eth_phy_power_enable_(bool enable);
static void eth_phy_config_gpio();
static void eth_phy_power_enable(bool enable);
std::string use_address_;
uint8_t phy_addr_{0};
@ -76,10 +76,11 @@ class EthernetComponent : public Component {
bool connected_{false};
EthernetComponentState state_{EthernetComponentState::STOPPED};
uint32_t connect_begin_;
eth_config_t eth_config;
eth_config_t eth_config_;
eth_phy_power_enable_func orig_power_enable_fun_;
};
// NOLINTNEXTLINE(cppcoreguidelines-avoid-non-const-global-variables)
extern EthernetComponent *global_eth_component;
} // namespace ethernet

104
esphome/components/fastled_base/fastled_light.h
View file

@ -44,33 +44,33 @@ class FastLEDLightOutput : public light::AddressableLight {
CLEDController &add_leds(int num_leds) {
switch (CHIPSET) {
case LPD8806: {
static LPD8806Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER, SPI_DATA_RATE> CONTROLLER;
return add_leds(&CONTROLLER, num_leds);
static LPD8806Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER, SPI_DATA_RATE> controller;
return add_leds(&controller, num_leds);
}
case WS2801: {
static WS2801Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER, SPI_DATA_RATE> CONTROLLER;
return add_leds(&CONTROLLER, num_leds);
static WS2801Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER, SPI_DATA_RATE> controller;
return add_leds(&controller, num_leds);
}
case WS2803: {
static WS2803Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER, SPI_DATA_RATE> CONTROLLER;
return add_leds(&CONTROLLER, num_leds);
static WS2803Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER, SPI_DATA_RATE> controller;
return add_leds(&controller, num_leds);
}
case SM16716: {
static SM16716Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER, SPI_DATA_RATE> CONTROLLER;
return add_leds(&CONTROLLER, num_leds);
static SM16716Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER, SPI_DATA_RATE> controller;
return add_leds(&controller, num_leds);
}
case P9813: {
static P9813Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER, SPI_DATA_RATE> CONTROLLER;
return add_leds(&CONTROLLER, num_leds);
static P9813Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER, SPI_DATA_RATE> controller;
return add_leds(&controller, num_leds);
}
case DOTSTAR:
case APA102: {
static APA102Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER, SPI_DATA_RATE> CONTROLLER;
return add_leds(&CONTROLLER, num_leds);
static APA102Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER, SPI_DATA_RATE> controller;
return add_leds(&controller, num_leds);
}
case SK9822: {
static SK9822Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER, SPI_DATA_RATE> CONTROLLER;
return add_leds(&CONTROLLER, num_leds);
static SK9822Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER, SPI_DATA_RATE> controller;
return add_leds(&controller, num_leds);
}
}
}
@ -78,33 +78,33 @@ class FastLEDLightOutput : public light::AddressableLight {
template<ESPIChipsets CHIPSET, uint8_t DATA_PIN, uint8_t CLOCK_PIN> CLEDController &add_leds(int num_leds) {
switch (CHIPSET) {
case LPD8806: {
static LPD8806Controller<DATA_PIN, CLOCK_PIN> CONTROLLER;
return add_leds(&CONTROLLER, num_leds);
static LPD8806Controller<DATA_PIN, CLOCK_PIN> controller;
return add_leds(&controller, num_leds);
}
case WS2801: {
static WS2801Controller<DATA_PIN, CLOCK_PIN> CONTROLLER;
return add_leds(&CONTROLLER, num_leds);
static WS2801Controller<DATA_PIN, CLOCK_PIN> controller;
return add_leds(&controller, num_leds);
}
case WS2803: {
static WS2803Controller<DATA_PIN, CLOCK_PIN> CONTROLLER;
return add_leds(&CONTROLLER, num_leds);
static WS2803Controller<DATA_PIN, CLOCK_PIN> controller;
return add_leds(&controller, num_leds);
}
case SM16716: {
static SM16716Controller<DATA_PIN, CLOCK_PIN> CONTROLLER;
return add_leds(&CONTROLLER, num_leds);
static SM16716Controller<DATA_PIN, CLOCK_PIN> controller;
return add_leds(&controller, num_leds);
}
case P9813: {
static P9813Controller<DATA_PIN, CLOCK_PIN> CONTROLLER;
return add_leds(&CONTROLLER, num_leds);
static P9813Controller<DATA_PIN, CLOCK_PIN> controller;
return add_leds(&controller, num_leds);
}
case DOTSTAR:
case APA102: {
static APA102Controller<DATA_PIN, CLOCK_PIN> CONTROLLER;
return add_leds(&CONTROLLER, num_leds);
static APA102Controller<DATA_PIN, CLOCK_PIN> controller;
return add_leds(&controller, num_leds);
}
case SK9822: {
static SK9822Controller<DATA_PIN, CLOCK_PIN> CONTROLLER;
return add_leds(&CONTROLLER, num_leds);
static SK9822Controller<DATA_PIN, CLOCK_PIN> controller;
return add_leds(&controller, num_leds);
}
}
}
@ -113,33 +113,33 @@ class FastLEDLightOutput : public light::AddressableLight {
CLEDController &add_leds(int num_leds) {
switch (CHIPSET) {
case LPD8806: {
static LPD8806Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER> CONTROLLER;
return add_leds(&CONTROLLER, num_leds);
static LPD8806Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER> controller;
return add_leds(&controller, num_leds);
}
case WS2801: {
static WS2801Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER> CONTROLLER;
return add_leds(&CONTROLLER, num_leds);
static WS2801Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER> controller;
return add_leds(&controller, num_leds);
}
case WS2803: {
static WS2803Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER> CONTROLLER;
return add_leds(&CONTROLLER, num_leds);
static WS2803Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER> controller;
return add_leds(&controller, num_leds);
}
case SM16716: {
static SM16716Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER> CONTROLLER;
return add_leds(&CONTROLLER, num_leds);
static SM16716Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER> controller;
return add_leds(&controller, num_leds);
}
case P9813: {
static P9813Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER> CONTROLLER;
return add_leds(&CONTROLLER, num_leds);
static P9813Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER> controller;
return add_leds(&controller, num_leds);
}
case DOTSTAR:
case APA102: {
static APA102Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER> CONTROLLER;
return add_leds(&CONTROLLER, num_leds);
static APA102Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER> controller;
return add_leds(&controller, num_leds);
}
case SK9822: {
static SK9822Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER> CONTROLLER;
return add_leds(&CONTROLLER, num_leds);
static SK9822Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER> controller;
return add_leds(&controller, num_leds);
}
}
}
@ -147,30 +147,30 @@ class FastLEDLightOutput : public light::AddressableLight {
#ifdef FASTLED_HAS_CLOCKLESS
template<template<uint8_t DATA_PIN, EOrder RGB_ORDER> class CHIPSET, uint8_t DATA_PIN, EOrder RGB_ORDER>
CLEDController &add_leds(int num_leds) {
static CHIPSET<DATA_PIN, RGB_ORDER> CONTROLLER;
return add_leds(&CONTROLLER, num_leds);
static CHIPSET<DATA_PIN, RGB_ORDER> controller;
return add_leds(&controller, num_leds);
}
template<template<uint8_t DATA_PIN, EOrder RGB_ORDER> class CHIPSET, uint8_t DATA_PIN>
CLEDController &add_leds(int num_leds) {
static CHIPSET<DATA_PIN, RGB> CONTROLLER;
return add_leds(&CONTROLLER, num_leds);
static CHIPSET<DATA_PIN, RGB> controller;
return add_leds(&controller, num_leds);
}
template<template<uint8_t DATA_PIN> class CHIPSET, uint8_t DATA_PIN> CLEDController &add_leds(int num_leds) {
static CHIPSET<DATA_PIN> CONTROLLER;
return add_leds(&CONTROLLER, num_leds);
static CHIPSET<DATA_PIN> controller;
return add_leds(&controller, num_leds);
}
#endif
template<template<EOrder RGB_ORDER> class CHIPSET, EOrder RGB_ORDER> CLEDController &add_leds(int num_leds) {
static CHIPSET<RGB_ORDER> CONTROLLER;
return add_leds(&CONTROLLER, num_leds);
static CHIPSET<RGB_ORDER> controller;
return add_leds(&controller, num_leds);
}
template<template<EOrder RGB_ORDER> class CHIPSET> CLEDController &add_leds(int num_leds) {
static CHIPSET<RGB> CONTROLLER;
return add_leds(&CONTROLLER, num_leds);
static CHIPSET<RGB> controller;
return add_leds(&controller, num_leds);
}
#ifdef FASTLED_HAS_BLOCKLESS

73
esphome/components/graph/graph.cpp
View file

@ -185,7 +185,7 @@ void GraphLegend::init(Graph *g) {
for (auto *trace : g->traces_) {
std::string txtstr = trace->get_name();
int fw, fos, fbl, fh;
this->font_label->measure(txtstr.c_str(), &fw, &fos, &fbl, &fh);
this->font_label_->measure(txtstr.c_str(), &fw, &fos, &fbl, &fh);
if (fw > txtw)
txtw = fw;
if (fh > txth)
@ -201,7 +201,7 @@ void GraphLegend::init(Graph *g) {
if (this->units_) {
valstr += trace->sensor_->get_unit_of_measurement();
}
this->font_value->measure(valstr.c_str(), &fw, &fos, &fbl, &fh);
this->font_value_->measure(valstr.c_str(), &fw, &fos, &fbl, &fh);
if (fw > valw)
valw = fw;
if (fh > valh)
@ -218,11 +218,11 @@ void GraphLegend::init(Graph *g) {
uint16_t h = this->height_;
DirectionType dir = this->direction_;
ValuePositionType valpos = this->values_;
if (!this->font_value) {
if (!this->font_value_) {
valpos = VALUE_POSITION_TYPE_NONE;
}
// Line sample always goes below text for compactness
this->yl = txth + (txth / 4) + lt / 2;
this->yl_ = txth + (txth / 4) + lt / 2;
if (dir == DIRECTION_TYPE_AUTO) {
dir = DIRECTION_TYPE_HORIZONTAL; // as default
@ -237,62 +237,62 @@ void GraphLegend::init(Graph *g) {
}
if (valpos == VALUE_POSITION_TYPE_BELOW) {
this->yv = txth + (txth / 4);
this->yv_ = txth + (txth / 4);
if (this->lines_)
this->yv += txth / 4 + lt;
this->yv_ += txth / 4 + lt;
} else if (valpos == VALUE_POSITION_TYPE_BESIDE) {
this->xv = (txtw + valw) / 2;
this->xv_ = (txtw + valw) / 2;
}
// If width or height is specified we divide evenly within, else we do tight-fit
if (w == 0) {
this->x0 = txtw / 2;
this->xs = txtw;
this->x0_ = txtw / 2;
this->xs_ = txtw;
if (valpos == VALUE_POSITION_TYPE_BELOW) {
this->xs = std::max(txtw, valw);
this->xs_ = std::max(txtw, valw);
;
this->x0 = this->xs / 2;
this->x0_ = this->xs_ / 2;
} else if (valpos == VALUE_POSITION_TYPE_BESIDE) {
this->xs = txtw + valw;
this->xs_ = txtw + valw;
}
if (dir == DIRECTION_TYPE_VERTICAL) {
this->width_ = this->xs;
this->width_ = this->xs_;
} else {
this->width_ = this->xs * n;
this->width_ = this->xs_ * n;
}
} else {
this->xs = w / n;
this->x0 = this->xs / 2;
this->xs_ = w / n;
this->x0_ = this->xs_ / 2;
}
if (h == 0) {
this->ys = txth;
this->ys_ = txth;
if (valpos == VALUE_POSITION_TYPE_BELOW) {
this->ys = txth + txth / 2 + valh;
this->ys_ = txth + txth / 2 + valh;
if (this->lines_) {
this->ys += lt;
this->ys_ += lt;
}
} else if (valpos == VALUE_POSITION_TYPE_BESIDE) {
if (this->lines_) {
this->ys = std::max(txth + txth / 4 + lt + txth / 4, valh + valh / 4);
this->ys_ = std::max(txth + txth / 4 + lt + txth / 4, valh + valh / 4);
} else {
this->ys = std::max(txth + txth / 4, valh + valh / 4);
this->ys_ = std::max(txth + txth / 4, valh + valh / 4);
}
this->height_ = this->ys * n;
this->height_ = this->ys_ * n;
}
if (dir == DIRECTION_TYPE_HORIZONTAL) {
this->height_ = this->ys;
this->height_ = this->ys_;
} else {
this->height_ = this->ys * n;
this->height_ = this->ys_ * n;
}
} else {
this->ys = h / n;
this->ys_ = h / n;
}
if (dir == DIRECTION_TYPE_HORIZONTAL) {
this->ys = 0;
this->ys_ = 0;
} else {
this->xs = 0;
this->xs_ = 0;
}
}
@ -310,38 +310,39 @@ void Graph::draw_legend(display::DisplayBuffer *buff, uint16_t x_offset, uint16_
buff->vertical_line(x_offset + w - 1, y_offset, h, color);
}
int x = x_offset + legend_->x0;
int x = x_offset + legend_->x0_;
int y = y_offset;
for (auto *trace : traces_) {
std::string txtstr = trace->get_name();
ESP_LOGV(TAG, " %s", txtstr.c_str());
buff->printf(x, y, legend_->font_label, trace->get_line_color(), TextAlign::TOP_CENTER, "%s", txtstr.c_str());
buff->printf(x, y, legend_->font_label_, trace->get_line_color(), TextAlign::TOP_CENTER, "%s", txtstr.c_str());
if (legend_->lines_) {
uint16_t thick = trace->get_line_thickness();
for (int16_t i = 0; i < legend_->x0 * 4 / 3; i++) {
for (int16_t i = 0; i < legend_->x0_ * 4 / 3; i++) {
uint8_t b = (i % (thick * LineType::PATTERN_LENGTH)) / thick;
if (((uint8_t) trace->get_line_type() & (1 << b)) == (1 << b)) {
buff->vertical_line(x - legend_->x0 * 2 / 3 + i, y + legend_->yl - thick / 2, thick, trace->get_line_color());
buff->vertical_line(x - legend_->x0_ * 2 / 3 + i, y + legend_->yl_ - thick / 2, thick,
trace->get_line_color());
}
}
}
if (legend_->values_ != VALUE_POSITION_TYPE_NONE) {
int xv = x + legend_->xv;
int yv = y + legend_->yv;
int xv = x + legend_->xv_;
int yv = y + legend_->yv_;
std::stringstream ss;
ss << std::fixed << std::setprecision(trace->sensor_->get_accuracy_decimals()) << trace->sensor_->get_state();
std::string valstr = ss.str();
if (legend_->units_) {
valstr += trace->sensor_->get_unit_of_measurement();
}
buff->printf(xv, yv, legend_->font_value, trace->get_line_color(), TextAlign::TOP_CENTER, "%s", valstr.c_str());
buff->printf(xv, yv, legend_->font_value_, trace->get_line_color(), TextAlign::TOP_CENTER, "%s", valstr.c_str());
ESP_LOGV(TAG, " value: %s", valstr.c_str());
}
x += legend_->xs;
y += legend_->ys;
x += legend_->xs_;
y += legend_->ys_;
}
}

29
esphome/components/graph/graph.h
View file

@ -1,8 +1,9 @@
#pragma once
#include <cstdint>
#include "esphome/components/sensor/sensor.h"
#include "esphome/core/color.h"
#include "esphome/core/component.h"
#include "esphome/components/sensor/sensor.h"
#include <cstdint>
#include <utility>
namespace esphome {
@ -43,8 +44,8 @@ enum ValuePositionType {
class GraphLegend {
public:
void init(Graph *g);
void set_name_font(display::Font *font) { this->font_label = font; }
void set_value_font(display::Font *font) { this->font_value = font; }
void set_name_font(display::Font *font) { this->font_label_ = font; }
void set_value_font(display::Font *font) { this->font_value_ = font; }
void set_width(uint32_t width) { this->width_ = width; }
void set_height(uint32_t height) { this->height_ = height; }
void set_border(bool val) { this->border_ = val; }
@ -61,8 +62,8 @@ class GraphLegend {
ValuePositionType values_{VALUE_POSITION_TYPE_AUTO};
bool units_{true};
DirectionType direction_{DIRECTION_TYPE_AUTO};
display::Font *font_label{nullptr};
display::Font *font_value{nullptr};
display::Font *font_label_{nullptr};
display::Font *font_value_{nullptr};
// Calculated values
Graph *parent_{nullptr};
// (x0) (xs,ys) (xs,ys)
@ -72,12 +73,12 @@ class GraphLegend {
// (0,yl)| \-> VALUE1+units
// v (top_center)
// LINE_SAMPLE
int x0{0}; // X-offset to centre of label text
int xs{0}; // X spacing between labels
int ys{0}; // Y spacing between labels
int yl{0}; // Y spacing from label to line sample
int xv{0}; // X distance between label to value text
int yv{0}; // Y distance between label to value text
int x0_{0}; // X-offset to centre of label text
int xs_{0}; // X spacing between labels
int ys_{0}; // Y spacing between labels
int yl_{0}; // Y spacing from label to line sample
int xv_{0}; // X distance between label to value text
int yv_{0}; // Y distance between label to value text
friend Graph;
};
@ -106,7 +107,7 @@ class HistoryData {
class GraphTrace {
public:
void init(Graph *g);
void set_name(std::string name) { name_ = name; }
void set_name(std::string name) { name_ = std::move(name); }
void set_sensor(sensor::Sensor *sensor) { sensor_ = sensor; }
uint8_t get_line_thickness() { return this->line_thickness_; }
void set_line_thickness(uint8_t val) { this->line_thickness_ = val; }
@ -114,7 +115,7 @@ class GraphTrace {
void set_line_type(enum LineType val) { this->line_type_ = val; }
Color get_line_color() { return this->line_color_; }
void set_line_color(Color val) { this->line_color_ = val; }
const std::string get_name(void) { return name_; }
const std::string get_name() { return name_; }
const HistoryData *get_tracedata() { return &data_; }
protected:

4
esphome/components/i2c/i2c_bus_arduino.cpp
View file

@ -11,7 +11,7 @@ namespace i2c {
static const char *const TAG = "i2c.arduino";
void ArduinoI2CBus::setup() {
recover();
recover_();
#ifdef USE_ESP32
static uint8_t next_bus_num = 0;
if (next_bus_num == 0)
@ -92,7 +92,7 @@ ErrorCode ArduinoI2CBus::writev(uint8_t address, WriteBuffer *buffers, size_t cn
return ERROR_UNKNOWN;
}
void ArduinoI2CBus::recover() {
void ArduinoI2CBus::recover_() {
// Perform I2C bus recovery, see
// https://www.analog.com/media/en/technical-documentation/application-notes/54305147357414AN686_0.pdf
// or see the linux kernel implementation, e.g.

2
esphome/components/i2c/i2c_bus_arduino.h
View file

@ -23,7 +23,7 @@ class ArduinoI2CBus : public I2CBus, public Component {
void set_frequency(uint32_t frequency) { frequency_ = frequency; }
private:
void recover();
void recover_();
protected:
TwoWire *wire_;

4
esphome/components/i2c/i2c_bus_esp_idf.cpp
View file

@ -14,7 +14,7 @@ void IDFI2CBus::setup() {
static i2c_port_t next_port = 0;
port_ = next_port++;
recover();
recover_();
i2c_config_t conf{};
memset(&conf, 0, sizeof(conf));
@ -144,7 +144,7 @@ ErrorCode IDFI2CBus::writev(uint8_t address, WriteBuffer *buffers, size_t cnt) {
return ERROR_OK;
}
void IDFI2CBus::recover() {
void IDFI2CBus::recover_() {
// Perform I2C bus recovery, see
// https://www.analog.com/media/en/technical-documentation/application-notes/54305147357414AN686_0.pdf
// or see the linux kernel implementation, e.g.

2
esphome/components/i2c/i2c_bus_esp_idf.h
View file

@ -25,7 +25,7 @@ class IDFI2CBus : public I2CBus, public Component {
void set_frequency(uint32_t frequency) { frequency_ = frequency; }
private:
void recover();
void recover_();
protected:
i2c_port_t port_;

4
esphome/components/inkbird_ibsth1_mini/inkbird_ibsth1_mini.cpp
View file

@ -8,7 +8,7 @@ namespace inkbird_ibsth1_mini {
static const char *const TAG = "inkbird_ibsth1_mini";
void InkbirdIBSTH1_MINI::dump_config() {
void InkbirdIbstH1Mini::dump_config() {
ESP_LOGCONFIG(TAG, "Inkbird IBS TH1 MINI");
LOG_SENSOR(" ", "Temperature", this->temperature_);
LOG_SENSOR(" ", "External Temperature", this->external_temperature_);
@ -16,7 +16,7 @@ void InkbirdIBSTH1_MINI::dump_config() {
LOG_SENSOR(" ", "Battery Level", this->battery_level_);
}
bool InkbirdIBSTH1_MINI::parse_device(const esp32_ble_tracker::ESPBTDevice &device) {
bool InkbirdIbstH1Mini::parse_device(const esp32_ble_tracker::ESPBTDevice &device) {
// The below is based on my research and reverse engineering of a single device
// It is entirely possible that some of that may be inaccurate or incomplete

2
esphome/components/inkbird_ibsth1_mini/inkbird_ibsth1_mini.h
View file

@ -9,7 +9,7 @@
namespace esphome {
namespace inkbird_ibsth1_mini {
class InkbirdIBSTH1_MINI : public Component, public esp32_ble_tracker::ESPBTDeviceListener {
class InkbirdIbstH1Mini : public Component, public esp32_ble_tracker::ESPBTDeviceListener {
public:
void set_address(uint64_t address) { address_ = address; }

6
esphome/components/inkbird_ibsth1_mini/sensor.py
View file

@ -21,14 +21,14 @@ DEPENDENCIES = ["esp32_ble_tracker"]
CONF_EXTERNAL_TEMPERATURE = "external_temperature"
inkbird_ibsth1_mini_ns = cg.esphome_ns.namespace("inkbird_ibsth1_mini")
InkbirdUBSTH1_MINI = inkbird_ibsth1_mini_ns.class_(
"InkbirdIBSTH1_MINI", esp32_ble_tracker.ESPBTDeviceListener, cg.Component
InkbirdIbstH1Mini = inkbird_ibsth1_mini_ns.class_(
"InkbirdIbstH1Mini", esp32_ble_tracker.ESPBTDeviceListener, cg.Component
)
CONFIG_SCHEMA = (
cv.Schema(
{
cv.GenerateID(): cv.declare_id(InkbirdUBSTH1_MINI),
cv.GenerateID(): cv.declare_id(InkbirdIbstH1Mini),
cv.Required(CONF_MAC_ADDRESS): cv.mac_address,
cv.Optional(CONF_TEMPERATURE): sensor.sensor_schema(
unit_of_measurement=UNIT_CELSIUS,

1
esphome/components/ledc/ledc_output.h
View file

@ -10,6 +10,7 @@
namespace esphome {
namespace ledc {
// NOLINTNEXTLINE(cppcoreguidelines-avoid-non-const-global-variables)
extern uint8_t next_ledc_channel;
class LEDCOutput : public output::FloatOutput, public Component {

2
esphome/components/light/addressable_light.h
View file

@ -80,7 +80,7 @@ class AddressableLight : public LightOutput, public Component {
void mark_shown_() {
#ifdef USE_POWER_SUPPLY
for (auto c : *this) {
for (const auto &c : *this) {
if (c.get().is_on()) {
this->power_.request();
return;

2
esphome/components/light/addressable_light_wrapper.h
View file

@ -9,7 +9,7 @@ namespace light {
class AddressableLightWrapper : public light::AddressableLight {
public:
explicit AddressableLightWrapper(light::LightState *light_state) : light_state_(light_state) {
this->wrapper_state_ = new uint8_t[5];
this->wrapper_state_ = new uint8_t[5]; // NOLINT(cppcoreguidelines-owning-memory)
}
int32_t size() const override { return 1; }

2
esphome/components/light/esp_range_view.h
View file

@ -18,6 +18,7 @@ class ESPRangeView : public ESPColorSettable {
public:
ESPRangeView(AddressableLight *parent, int32_t begin, int32_t end)
: parent_(parent), begin_(begin), end_(end < begin ? begin : end) {}
ESPRangeView(const ESPRangeView &) = default;
int32_t size() const { return this->end_ - this->begin_; }
ESPColorView operator[](int32_t index) const;
@ -62,6 +63,7 @@ class ESPRangeView : public ESPColorSettable {
class ESPRangeIterator {
public:
ESPRangeIterator(const ESPRangeView &range, int32_t i) : range_(range), i_(i) {}
ESPRangeIterator(const ESPRangeIterator &) = default;
ESPRangeIterator operator++() {
this->i_++;
return *this;

17
esphome/components/midea/appliance_base.h
View file

@ -31,9 +31,10 @@ class ApplianceBase : public Component, public uart::UARTDevice, public climate:
ApplianceBase() {
this->base_.setStream(this);
this->base_.addOnStateCallback(std::bind(&ApplianceBase::on_status_change, this));
dudanov::midea::ApplianceBase::setLogger([](int level, const char *tag, int line, String format, va_list args) {
esp_log_vprintf_(level, tag, line, format.c_str(), args);
});
dudanov::midea::ApplianceBase::setLogger(
[](int level, const char *tag, int line, const String &format, va_list args) {
esp_log_vprintf_(level, tag, line, format.c_str(), args);
});
}
bool can_proceed() override {
return this->base_.getAutoconfStatus() != dudanov::midea::AutoconfStatus::AUTOCONF_PROGRESS;
@ -46,11 +47,11 @@ class ApplianceBase : public Component, public uart::UARTDevice, public climate:
void set_request_attempts(uint32_t attempts) { this->base_.setNumAttempts(attempts); }
void set_beeper_feedback(bool state) { this->base_.setBeeper(state); }
void set_autoconf(bool value) { this->base_.setAutoconf(value); }
void set_supported_modes(std::set<ClimateMode> modes) { this->supported_modes_ = std::move(modes); }
void set_supported_swing_modes(std::set<ClimateSwingMode> modes) { this->supported_swing_modes_ = std::move(modes); }
void set_supported_presets(std::set<ClimatePreset> presets) { this->supported_presets_ = std::move(presets); }
void set_custom_presets(std::set<std::string> presets) { this->supported_custom_presets_ = std::move(presets); }
void set_custom_fan_modes(std::set<std::string> modes) { this->supported_custom_fan_modes_ = std::move(modes); }
void set_supported_modes(const std::set<ClimateMode> &modes) { this->supported_modes_ = modes; }
void set_supported_swing_modes(const std::set<ClimateSwingMode> &modes) { this->supported_swing_modes_ = modes; }
void set_supported_presets(const std::set<ClimatePreset> &presets) { this->supported_presets_ = presets; }
void set_custom_presets(const std::set<std::string> &presets) { this->supported_custom_presets_ = presets; }
void set_custom_fan_modes(const std::set<std::string> &modes) { this->supported_custom_fan_modes_ = modes; }
virtual void on_status_change() = 0;
#ifdef USE_REMOTE_TRANSMITTER
void set_transmitter(remote_transmitter::RemoteTransmitterComponent *transmitter) {

12
esphome/components/pvvx_mithermometer/pvvx_mithermometer.cpp
View file

@ -25,14 +25,14 @@ bool PVVXMiThermometer::parse_device(const esp32_ble_tracker::ESPBTDevice &devic
bool success = false;
for (auto &service_data : device.get_service_datas()) {
auto res = parse_header(service_data);
auto res = parse_header_(service_data);
if (!res.has_value()) {
continue;
}
if (!(parse_message(service_data.data, *res))) {
if (!(parse_message_(service_data.data, *res))) {
continue;
}
if (!(report_results(res, device.address_str()))) {
if (!(report_results_(res, device.address_str()))) {
continue;
}
if (res->temperature.has_value() && this->temperature_ != nullptr)
@ -49,7 +49,7 @@ bool PVVXMiThermometer::parse_device(const esp32_ble_tracker::ESPBTDevice &devic
return success;
}
optional<ParseResult> PVVXMiThermometer::parse_header(const esp32_ble_tracker::ServiceData &service_data) {
optional<ParseResult> PVVXMiThermometer::parse_header_(const esp32_ble_tracker::ServiceData &service_data) {
ParseResult result;
if (!service_data.uuid.contains(0x1A, 0x18)) {
ESP_LOGVV(TAG, "parse_header(): no service data UUID magic bytes.");
@ -68,7 +68,7 @@ optional<ParseResult> PVVXMiThermometer::parse_header(const esp32_ble_tracker::S
return result;
}
bool PVVXMiThermometer::parse_message(const std::vector<uint8_t> &message, ParseResult &result) {
bool PVVXMiThermometer::parse_message_(const std::vector<uint8_t> &message, ParseResult &result) {
/*
All data little endian
uint8_t size; // = 19
@ -109,7 +109,7 @@ bool PVVXMiThermometer::parse_message(const std::vector<uint8_t> &message, Parse
return true;
}
bool PVVXMiThermometer::report_results(const optional<ParseResult> &result, const std::string &address) {
bool PVVXMiThermometer::report_results_(const optional<ParseResult> &result, const std::string &address) {
if (!result.has_value()) {
ESP_LOGVV(TAG, "report_results(): no results available.");
return false;

6
esphome/components/pvvx_mithermometer/pvvx_mithermometer.h
View file

@ -36,9 +36,9 @@ class PVVXMiThermometer : public Component, public esp32_ble_tracker::ESPBTDevic
sensor::Sensor *battery_level_{nullptr};
sensor::Sensor *battery_voltage_{nullptr};
optional<ParseResult> parse_header(const esp32_ble_tracker::ServiceData &service_data);
bool parse_message(const std::vector<uint8_t> &message, ParseResult &result);
bool report_results(const optional<ParseResult> &result, const std::string &address);
optional<ParseResult> parse_header_(const esp32_ble_tracker::ServiceData &service_data);
bool parse_message_(const std::vector<uint8_t> &message, ParseResult &result);
bool report_results_(const optional<ParseResult> &result, const std::string &address);
};
} // namespace pvvx_mithermometer

2
esphome/components/remote_base/midea_protocol.h
View file

@ -92,7 +92,7 @@ using MideaDumper = RemoteReceiverDumper<MideaProtocol, MideaData>;
template<typename... Ts> class MideaAction : public RemoteTransmitterActionBase<Ts...> {
TEMPLATABLE_VALUE(std::vector<uint8_t>, code)
void set_code(std::vector<uint8_t> code) { code_ = code; }
void set_code(const std::vector<uint8_t> &code) { code_ = code; }
void encode(RemoteTransmitData *dst, Ts... x) override {
MideaData data = this->code_.value(x...);
data.finalize();

4
esphome/components/remote_base/remote_base.h
View file

@ -161,11 +161,11 @@ class RemoteRMTChannel {
void set_clock_divider(uint8_t clock_divider) { this->clock_divider_ = clock_divider; }
protected:
uint32_t from_microseconds(uint32_t us) {
uint32_t from_microseconds_(uint32_t us) {
const uint32_t ticks_per_ten_us = 80000000u / this->clock_divider_ / 100000u;
return us * ticks_per_ten_us / 10;
}
uint32_t to_microseconds(uint32_t ticks) {
uint32_t to_microseconds_(uint32_t ticks) {
const uint32_t ticks_per_ten_us = 80000000u / this->clock_divider_ / 100000u;
return (ticks * 10) / ticks_per_ten_us;
}

28
esphome/components/remote_receiver/remote_receiver_esp32.cpp
View file

@ -20,9 +20,9 @@ void RemoteReceiverComponent::setup() {
rmt.rx_config.filter_en = false;
} else {
rmt.rx_config.filter_en = true;
rmt.rx_config.filter_ticks_thresh = this->from_microseconds(this->filter_us_);
rmt.rx_config.filter_ticks_thresh = this->from_microseconds_(this->filter_us_);
}
rmt.rx_config.idle_threshold = this->from_microseconds(this->idle_us_);
rmt.rx_config.idle_threshold = this->from_microseconds_(this->idle_us_);
esp_err_t error = rmt_config(&rmt);
if (error != ESP_OK) {
@ -90,14 +90,14 @@ void RemoteReceiverComponent::decode_rmt_(rmt_item32_t *item, size_t len) {
ESP_LOGVV(TAG, "START:");
for (size_t i = 0; i < len; i++) {
if (item[i].level0) {
ESP_LOGVV(TAG, "%u A: ON %uus (%u ticks)", i, this->to_microseconds(item[i].duration0), item[i].duration0);
ESP_LOGVV(TAG, "%u A: ON %uus (%u ticks)", i, this->to_microseconds_(item[i].duration0), item[i].duration0);
} else {
ESP_LOGVV(TAG, "%u A: OFF %uus (%u ticks)", i, this->to_microseconds(item[i].duration0), item[i].duration0);
ESP_LOGVV(TAG, "%u A: OFF %uus (%u ticks)", i, this->to_microseconds_(item[i].duration0), item[i].duration0);
}
if (item[i].level1) {
ESP_LOGVV(TAG, "%u B: ON %uus (%u ticks)", i, this->to_microseconds(item[i].duration1), item[i].duration1);
ESP_LOGVV(TAG, "%u B: ON %uus (%u ticks)", i, this->to_microseconds_(item[i].duration1), item[i].duration1);
} else {
ESP_LOGVV(TAG, "%u B: OFF %uus (%u ticks)", i, this->to_microseconds(item[i].duration1), item[i].duration1);
ESP_LOGVV(TAG, "%u B: OFF %uus (%u ticks)", i, this->to_microseconds_(item[i].duration1), item[i].duration1);
}
}
ESP_LOGVV(TAG, "\n");
@ -111,16 +111,16 @@ void RemoteReceiverComponent::decode_rmt_(rmt_item32_t *item, size_t len) {
} else {
if (prev_length > 0) {
if (prev_level) {
this->temp_.push_back(this->to_microseconds(prev_length) * multiplier);
this->temp_.push_back(this->to_microseconds_(prev_length) * multiplier);
} else {
this->temp_.push_back(-int32_t(this->to_microseconds(prev_length)) * multiplier);
this->temp_.push_back(-int32_t(this->to_microseconds_(prev_length)) * multiplier);
}
}
prev_level = bool(item[i].level0);
prev_length = item[i].duration0;
}
if (this->to_microseconds(prev_length) > this->idle_us_) {
if (this->to_microseconds_(prev_length) > this->idle_us_) {
break;
}
@ -131,24 +131,24 @@ void RemoteReceiverComponent::decode_rmt_(rmt_item32_t *item, size_t len) {
} else {
if (prev_length > 0) {
if (prev_level) {
this->temp_.push_back(this->to_microseconds(prev_length) * multiplier);
this->temp_.push_back(this->to_microseconds_(prev_length) * multiplier);
} else {
this->temp_.push_back(-int32_t(this->to_microseconds(prev_length)) * multiplier);
this->temp_.push_back(-int32_t(this->to_microseconds_(prev_length)) * multiplier);
}
}
prev_level = bool(item[i].level1);
prev_length = item[i].duration1;
}
if (this->to_microseconds(prev_length) > this->idle_us_) {
if (this->to_microseconds_(prev_length) > this->idle_us_) {
break;
}
}
if (prev_length > 0) {
if (prev_level) {
this->temp_.push_back(this->to_microseconds(prev_length) * multiplier);
this->temp_.push_back(this->to_microseconds_(prev_length) * multiplier);
} else {
this->temp_.push_back(-int32_t(this->to_microseconds(prev_length)) * multiplier);
this->temp_.push_back(-int32_t(this->to_microseconds_(prev_length)) * multiplier);
}
}
}

2
esphome/components/remote_transmitter/remote_transmitter.h
View file

@ -35,7 +35,7 @@ class RemoteTransmitterComponent : public remote_base::RemoteTransmitterBase,
#endif
#ifdef USE_ESP32
void configure_rmt();
void configure_rmt_();
uint32_t current_carrier_frequency_{UINT32_MAX};
bool initialized_{false};

8
esphome/components/remote_transmitter/remote_transmitter_esp32.cpp
View file

@ -9,7 +9,7 @@ namespace remote_transmitter {
static const char *const TAG = "remote_transmitter";
void RemoteTransmitterComponent::setup() { this->configure_rmt(); }
void RemoteTransmitterComponent::setup() { this->configure_rmt_(); }
void RemoteTransmitterComponent::dump_config() {
ESP_LOGCONFIG(TAG, "Remote Transmitter...");
@ -27,7 +27,7 @@ void RemoteTransmitterComponent::dump_config() {
}
}
void RemoteTransmitterComponent::configure_rmt() {
void RemoteTransmitterComponent::configure_rmt_() {
rmt_config_t c{};
this->config_rmt(c);
@ -77,7 +77,7 @@ void RemoteTransmitterComponent::send_internal(uint32_t send_times, uint32_t sen
if (this->current_carrier_frequency_ != this->temp_.get_carrier_frequency()) {
this->current_carrier_frequency_ = this->temp_.get_carrier_frequency();
this->configure_rmt();
this->configure_rmt_();
}
this->rmt_temp_.clear();
@ -89,7 +89,7 @@ void RemoteTransmitterComponent::send_internal(uint32_t send_times, uint32_t sen
bool level = val >= 0;
if (!level)
val = -val;
val = this->from_microseconds(static_cast<uint32_t>(val));
val = this->from_microseconds_(static_cast<uint32_t>(val));
do {
int32_t item = std::min(val, int32_t(32767));

27
esphome/components/socket/headers.h
View file

@ -7,10 +7,10 @@
#ifdef USE_SOCKET_IMPL_LWIP_TCP
#define LWIP_INTERNAL
#include <sys/types.h>
#include "lwip/inet.h"
#include <stdint.h>
#include <errno.h>
#include <cerrno>
#include <cstdint>
#include <sys/types.h>
/* Address families. */
#define AF_UNSPEC 0
@ -45,9 +45,10 @@
#define SOL_SOCKET 0xfff /* options for socket level */
typedef uint8_t sa_family_t;
typedef uint16_t in_port_t;
using sa_family_t = uint8_t;
using in_port_t = uint16_t;
// NOLINTNEXTLINE(readability-identifier-naming)
struct sockaddr_in {
uint8_t sin_len;
sa_family_t sin_family;
@ -57,6 +58,7 @@ struct sockaddr_in {
char sin_zero[SIN_ZERO_LEN];
};
// NOLINTNEXTLINE(readability-identifier-naming)
struct sockaddr_in6 {
uint8_t sin6_len; /* length of this structure */
sa_family_t sin6_family; /* AF_INET6 */
@ -66,12 +68,14 @@ struct sockaddr_in6 {
uint32_t sin6_scope_id; /* Set of interfaces for scope */
};
// NOLINTNEXTLINE(readability-identifier-naming)
struct sockaddr {
uint8_t sa_len;
sa_family_t sa_family;
char sa_data[14];
};
// NOLINTNEXTLINE(readability-identifier-naming)
struct sockaddr_storage {
uint8_t s2_len;
sa_family_t ss_family;
@ -79,8 +83,9 @@ struct sockaddr_storage {
uint32_t s2_data2[3];
uint32_t s2_data3[3];
};
typedef uint32_t socklen_t;
using socklen_t = uint32_t;
// NOLINTNEXTLINE(readability-identifier-naming)
struct iovec {
void *iov_base;
size_t iov_len;
@ -106,13 +111,13 @@ struct iovec {
#ifdef USE_SOCKET_IMPL_BSD_SOCKETS
#include <sys/types.h>
#include <sys/socket.h>
#include <cstdint>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
#include <sys/types.h>
#include <sys/uio.h>
#include <unistd.h>
#include <fcntl.h>
#include <stdint.h>
#ifdef USE_ARDUINO
// arduino-esp32 declares a global var called INADDR_NONE which is replaced
@ -121,7 +126,7 @@ struct iovec {
#undef INADDR_NONE
#endif
// not defined for ESP32
typedef uint32_t socklen_t;
using socklen_t = uint32_t;
#define ESPHOME_INADDR_ANY ((uint32_t) 0x00000000UL)
#define ESPHOME_INADDR_NONE ((uint32_t) 0xFFFFFFFFUL)

2
esphome/components/t6615/t6615.h
View file

@ -35,7 +35,7 @@ class T6615Component : public PollingComponent, public uart::UARTDevice {
void send_ppm_command_();
T6615Command command_ = T6615Command::NONE;
unsigned long command_time_ = 0;
uint32_t command_time_ = 0;
sensor::Sensor *co2_sensor_{nullptr};
};

10
esphome/components/uart/uart_component_esp8266.cpp
View file

@ -13,7 +13,7 @@ namespace esphome {
namespace uart {
static const char *const TAG = "uart.arduino_esp8266";
bool ESP8266UartComponent::serial0InUse = false; // NOLINT(cppcoreguidelines-avoid-non-const-global-variables)
bool ESP8266UartComponent::serial0_in_use = false; // NOLINT(cppcoreguidelines-avoid-non-const-global-variables)
uint32_t ESP8266UartComponent::get_config() {
uint32_t config = 0;
@ -55,7 +55,7 @@ void ESP8266UartComponent::setup() {
// is 1 we still want to use Serial.
SerialConfig config = static_cast<SerialConfig>(get_config());
if (!ESP8266UartComponent::serial0InUse && (tx_pin_ == nullptr || tx_pin_->get_pin() == 1) &&
if (!ESP8266UartComponent::serial0_in_use && (tx_pin_ == nullptr || tx_pin_->get_pin() == 1) &&
(rx_pin_ == nullptr || rx_pin_->get_pin() == 3)
#ifdef USE_LOGGER
// we will use UART0 if logger isn't using it in swapped mode
@ -66,8 +66,8 @@ void ESP8266UartComponent::setup() {
this->hw_serial_ = &Serial;
this->hw_serial_->begin(this->baud_rate_, config);
this->hw_serial_->setRxBufferSize(this->rx_buffer_size_);
ESP8266UartComponent::serial0InUse = true;
} else if (!ESP8266UartComponent::serial0InUse && (tx_pin_ == nullptr || tx_pin_->get_pin() == 15) &&
ESP8266UartComponent::serial0_in_use = true;
} else if (!ESP8266UartComponent::serial0_in_use && (tx_pin_ == nullptr || tx_pin_->get_pin() == 15) &&
(rx_pin_ == nullptr || rx_pin_->get_pin() == 13)
#ifdef USE_LOGGER
// we will use UART0 swapped if logger isn't using it in regular mode
@ -79,7 +79,7 @@ void ESP8266UartComponent::setup() {
this->hw_serial_->begin(this->baud_rate_, config);
this->hw_serial_->setRxBufferSize(this->rx_buffer_size_);
this->hw_serial_->swap();
ESP8266UartComponent::serial0InUse = true;
ESP8266UartComponent::serial0_in_use = true;
} else if ((tx_pin_ == nullptr || tx_pin_->get_pin() == 2) && (rx_pin_ == nullptr || rx_pin_->get_pin() == 8)) {
this->hw_serial_ = &Serial1;
this->hw_serial_->begin(this->baud_rate_, config);

2
esphome/components/uart/uart_component_esp8266.h
View file

@ -70,7 +70,7 @@ class ESP8266UartComponent : public UARTComponent, public Component {
ESP8266SoftwareSerial *sw_serial_{nullptr};
private:
static bool serial0InUse;
static bool serial0_in_use; // NOLINT(cppcoreguidelines-avoid-non-const-global-variables)
};
} // namespace uart

4
esphome/components/uart/uart_component_esp_idf.cpp
View file

@ -14,7 +14,7 @@ namespace esphome {
namespace uart {
static const char *const TAG = "uart.idf";
uart_config_t IDFUARTComponent::get_config() {
uart_config_t IDFUARTComponent::get_config_() {
uart_parity_t parity = UART_PARITY_DISABLE;
if (this->parity_ == UART_CONFIG_PARITY_EVEN)
parity = UART_PARITY_EVEN;
@ -70,7 +70,7 @@ void IDFUARTComponent::setup() {
xSemaphoreTake(this->lock_, portMAX_DELAY);
uart_config_t uart_config = this->get_config();
uart_config_t uart_config = this->get_config_();
esp_err_t err = uart_param_config(this->uart_num_, &uart_config);
if (err != ESP_OK) {
ESP_LOGW(TAG, "uart_param_config failed: %s", esp_err_to_name(err));

2
esphome/components/uart/uart_component_esp_idf.h
View file

@ -26,7 +26,7 @@ class IDFUARTComponent : public UARTComponent, public Component {
protected:
void check_logger_conflict() override;
uart_port_t uart_num_;
uart_config_t get_config();
uart_config_t get_config_();
SemaphoreHandle_t lock_;
bool has_peek_{false};

2
esphome/components/wifi_info/wifi_info_text_sensor.h
View file

@ -13,7 +13,7 @@ class IPAddressWiFiInfo : public Component, public text_sensor::TextSensor {
auto ip = wifi::global_wifi_component->wifi_sta_ip();
if (ip != this->last_ip_) {
this->last_ip_ = ip;
this->publish_state(ip.str().c_str());
this->publish_state(ip.str());
}
}
float get_setup_priority() const override { return setup_priority::AFTER_WIFI; }

20
esphome/components/xiaomi_miscale/xiaomi_miscale.cpp
View file

@ -23,16 +23,16 @@ bool XiaomiMiscale::parse_device(const esp32_ble_tracker::ESPBTDevice &device) {
bool success = false;
for (auto &service_data : device.get_service_datas()) {
auto res = parse_header(service_data);
auto res = parse_header_(service_data);
if (!res.has_value()) {
continue;
}
if (!(parse_message(service_data.data, *res))) {
if (!(parse_message_(service_data.data, *res))) {
continue;
}
if (!(report_results(res, device.address_str()))) {
if (!(report_results_(res, device.address_str()))) {
continue;
}
@ -49,7 +49,7 @@ bool XiaomiMiscale::parse_device(const esp32_ble_tracker::ESPBTDevice &device) {
return success;
}
optional<ParseResult> XiaomiMiscale::parse_header(const esp32_ble_tracker::ServiceData &service_data) {
optional<ParseResult> XiaomiMiscale::parse_header_(const esp32_ble_tracker::ServiceData &service_data) {
ParseResult result;
if (service_data.uuid == esp32_ble_tracker::ESPBTUUID::from_uint16(0x181D) && service_data.data.size() == 10) {
result.version = 1;
@ -65,15 +65,15 @@ optional<ParseResult> XiaomiMiscale::parse_header(const esp32_ble_tracker::Servi
return result;
}
bool XiaomiMiscale::parse_message(const std::vector<uint8_t> &message, ParseResult &result) {
bool XiaomiMiscale::parse_message_(const std::vector<uint8_t> &message, ParseResult &result) {
if (result.version == 1) {
return parse_message_V1(message, result);
return parse_message_v1_(message, result);
} else {
return parse_message_V2(message, result);
return parse_message_v2_(message, result);
}
}
bool XiaomiMiscale::parse_message_V1(const std::vector<uint8_t> &message, ParseResult &result) {
bool XiaomiMiscale::parse_message_v1_(const std::vector<uint8_t> &message, ParseResult &result) {
// message size is checked in parse_header
// 1-2 Weight (MISCALE 181D)
// 3-4 Years (MISCALE 181D)
@ -97,7 +97,7 @@ bool XiaomiMiscale::parse_message_V1(const std::vector<uint8_t> &message, ParseR
return true;
}
bool XiaomiMiscale::parse_message_V2(const std::vector<uint8_t> &message, ParseResult &result) {
bool XiaomiMiscale::parse_message_v2_(const std::vector<uint8_t> &message, ParseResult &result) {
// message size is checked in parse_header
// 2-3 Years (MISCALE 2 181B)
// 4 month (MISCALE 2 181B)
@ -138,7 +138,7 @@ bool XiaomiMiscale::parse_message_V2(const std::vector<uint8_t> &message, ParseR
return true;
}
bool XiaomiMiscale::report_results(const optional<ParseResult> &result, const std::string &address) {
bool XiaomiMiscale::report_results_(const optional<ParseResult> &result, const std::string &address) {
if (!result.has_value()) {
ESP_LOGVV(TAG, "report_results(): no results available.");
return false;

10
esphome/components/xiaomi_miscale/xiaomi_miscale.h
View file

@ -30,11 +30,11 @@ class XiaomiMiscale : public Component, public esp32_ble_tracker::ESPBTDeviceLis
sensor::Sensor *weight_{nullptr};
sensor::Sensor *impedance_{nullptr};
optional<ParseResult> parse_header(const esp32_ble_tracker::ServiceData &service_data);
bool parse_message(const std::vector<uint8_t> &message, ParseResult &result);
bool parse_message_V1(const std::vector<uint8_t> &message, ParseResult &result);
bool parse_message_V2(const std::vector<uint8_t> &message, ParseResult &result);
bool report_results(const optional<ParseResult> &result, const std::string &address);
optional<ParseResult> parse_header_(const esp32_ble_tracker::ServiceData &service_data);
bool parse_message_(const std::vector<uint8_t> &message, ParseResult &result);
bool parse_message_v1_(const std::vector<uint8_t> &message, ParseResult &result);
bool parse_message_v2_(const std::vector<uint8_t> &message, ParseResult &result);
bool report_results_(const optional<ParseResult> &result, const std::string &address);
};
} // namespace xiaomi_miscale

6
esphome/core/gpio.h
View file

@ -6,7 +6,7 @@ namespace esphome {
#define LOG_PIN(prefix, pin) \
if ((pin) != nullptr) { \
ESP_LOGCONFIG(TAG, prefix "%s", pin->dump_summary().c_str()); \
ESP_LOGCONFIG(TAG, prefix "%s", (pin)->dump_summary().c_str()); \
}
// put GPIO flags in a namepsace to not pollute esphome namespace
@ -78,7 +78,7 @@ class ISRInternalGPIOPin {
class InternalGPIOPin : public GPIOPin {
public:
template<typename T> void attach_interrupt(void (*func)(T *), T *arg, gpio::InterruptType type) const {
this->attach_interrupt_(reinterpret_cast<void (*)(void *)>(func), arg, type);
this->attach_interrupt(reinterpret_cast<void (*)(void *)>(func), arg, type);
}
virtual void detach_interrupt() const = 0;
@ -92,7 +92,7 @@ class InternalGPIOPin : public GPIOPin {
virtual bool is_inverted() const = 0;
protected:
virtual void attach_interrupt_(void (*func)(void *), void *arg, gpio::InterruptType type) const = 0;
virtual void attach_interrupt(void (*func)(void *), void *arg, gpio::InterruptType type) const = 0;
};
} // namespace esphome

2
esphome/core/hal.h
View file

@ -37,7 +37,7 @@ void yield();
uint32_t millis();
uint32_t micros();
void delay(uint32_t ms);
void delayMicroseconds(uint32_t us);
void delayMicroseconds(uint32_t us); // NOLINT(readability-identifier-naming)
void __attribute__((noreturn)) arch_restart();
void arch_feed_wdt();
uint32_t arch_get_cpu_cycle_count();

4
esphome/core/helpers.h
View file

@ -333,10 +333,10 @@ template<typename T> T *new_buffer(size_t length) {
if (psramFound()) {
buffer = (T *) ps_malloc(length);
} else {
buffer = new T[length];
buffer = new T[length]; // NOLINT(cppcoreguidelines-owning-memory)
}
#else
buffer = new T[length]; // NOLINT
buffer = new T[length]; // NOLINT(cppcoreguidelines-owning-memory)
#endif
return buffer;

3
script/clang-tidy
View file

@ -17,7 +17,7 @@ import pexpect
sys.path.append(os.path.dirname(__file__))
from helpers import shlex_quote, get_output, filter_grep, \
build_all_include, temp_header_file, git_ls_files, filter_changed, load_idedata
build_all_include, temp_header_file, git_ls_files, filter_changed, load_idedata, basepath
def clang_options(idedata):
@ -89,6 +89,7 @@ def run_tidy(args, options, tmpdir, queue, lock, failed_files):
invocation.append('-quiet')
invocation.append(os.path.abspath(path))
invocation.append(f"--header-filter={os.path.abspath(basepath)}/.*")
invocation.append('--')
invocation.extend(options)
invocation_s = ' '.join(shlex_quote(x) for x in invocation)