Add support for additional Xiaomi BLE sensors (#1027)

.travis.yml

@@ -21,6 +21,7 @@ matrix:
         - esphome tests/test1.yaml compile
         - esphome tests/test2.yaml compile
         - esphome tests/test3.yaml compile
+        - esphome tests/test4.yaml compile
     - env: TARGET=Cpp-Lint
       dist: trusty
       sudo: required

esphome/components/xiaomi_ble/xiaomi_ble.cpp

@@ -1,101 +1,23 @@
 #include "xiaomi_ble.h"
 #include "esphome/core/log.h"
+#include "esphome/core/helpers.h"
 
 #ifdef ARDUINO_ARCH_ESP32
 
+#include <vector>
+#include "mbedtls/ccm.h"
+
 namespace esphome {
 namespace xiaomi_ble {
 
 static const char *TAG = "xiaomi_ble";
 
-bool parse_xiaomi_data_byte(uint8_t data_type, const uint8_t *data, uint8_t data_length, XiaomiParseResult &result) {
+bool parse_xiaomi_message(const std::vector<uint8_t> &message, XiaomiParseResult &result) {
-  switch (data_type) {
+  result.has_encryption = (message[0] & 0x08) ? true : false;  // update encryption status
-    case 0x0D: {  // temperature+humidity, 4 bytes, 16-bit signed integer (LE) each, 0.1 °C, 0.1 %
+  if (result.has_encryption) {
-      if (data_length != 4)
+    ESP_LOGVV(TAG, "parse_xiaomi_message(): payload is encrypted, stop reading message.");
-        return false;
-      const int16_t temperature = uint16_t(data[0]) | (uint16_t(data[1]) << 8);
-      const int16_t humidity = uint16_t(data[2]) | (uint16_t(data[3]) << 8);
-      result.temperature = temperature / 10.0f;
-      result.humidity = humidity / 10.0f;
-      return true;
-    }
-    case 0x0A: {  // battery, 1 byte, 8-bit unsigned integer, 1 %
-      if (data_length != 1)
-        return false;
-      result.battery_level = data[0];
-      return true;
-    }
-    case 0x06: {  // humidity, 2 bytes, 16-bit signed integer (LE), 0.1 %
-      if (data_length != 2)
-        return false;
-      const int16_t humidity = uint16_t(data[0]) | (uint16_t(data[1]) << 8);
-      result.humidity = humidity / 10.0f;
-      return true;
-    }
-    case 0x04: {  // temperature, 2 bytes, 16-bit signed integer (LE), 0.1 °C
-      if (data_length != 2)
-        return false;
-      const int16_t temperature = uint16_t(data[0]) | (uint16_t(data[1]) << 8);
-      result.temperature = temperature / 10.0f;
-      return true;
-    }
-    case 0x09: {  // conductivity, 2 bytes, 16-bit unsigned integer (LE), 1 µS/cm
-      if (data_length != 2)
-        return false;
-      const uint16_t conductivity = uint16_t(data[0]) | (uint16_t(data[1]) << 8);
-      result.conductivity = conductivity;
-      return true;
-    }
-    case 0x07: {  // illuminance, 3 bytes, 24-bit unsigned integer (LE), 1 lx
-      if (data_length != 3)
-        return false;
-      const uint32_t illuminance = uint32_t(data[0]) | (uint32_t(data[1]) << 8) | (uint32_t(data[2]) << 16);
-      result.illuminance = illuminance;
-      return true;
-    }
-    case 0x08: {  // soil moisture, 1 byte, 8-bit unsigned integer, 1 %
-      if (data_length != 1)
-        return false;
-      result.moisture = data[0];
-      return true;
-    }
-    default:
     return false;
   }
-}
-bool parse_xiaomi_service_data(XiaomiParseResult &result, const esp32_ble_tracker::ServiceData &service_data) {
-  if (!service_data.uuid.contains(0x95, 0xFE)) {
-    // ESP_LOGVV(TAG, "Xiaomi no service data UUID magic bytes");
-    return false;
-  }
-
-  const auto raw = service_data.data;
-
-  if (raw.size() < 14) {
-    // ESP_LOGVV(TAG, "Xiaomi service data too short!");
-    return false;
-  }
-
-  bool is_lywsdcgq = (raw[1] & 0x20) == 0x20 && raw[2] == 0xAA && raw[3] == 0x01;
-  bool is_hhccjcy01 = (raw[1] & 0x20) == 0x20 && raw[2] == 0x98 && raw[3] == 0x00;
-  bool is_lywsd02 = (raw[1] & 0x20) == 0x20 && raw[2] == 0x5b && raw[3] == 0x04;
-  bool is_cgg1 = ((raw[1] & 0x30) == 0x30 || (raw[1] & 0x20) == 0x20) && raw[2] == 0x47 && raw[3] == 0x03;
-
-  if (!is_lywsdcgq && !is_hhccjcy01 && !is_lywsd02 && !is_cgg1) {
-    // ESP_LOGVV(TAG, "Xiaomi no magic bytes");
-    return false;
-  }
-
-  result.type = XiaomiParseResult::TYPE_HHCCJCY01;
-  if (is_lywsdcgq) {
-    result.type = XiaomiParseResult::TYPE_LYWSDCGQ;
-  } else if (is_lywsd02) {
-    result.type = XiaomiParseResult::TYPE_LYWSD02;
-  } else if (is_cgg1) {
-    result.type = XiaomiParseResult::TYPE_CGG1;
-  }
-
-  uint8_t raw_offset = is_lywsdcgq || is_cgg1 ? 11 : 12;
 
   // Data point specs
   // Byte 0: type
@@ -103,85 +25,298 @@ bool parse_xiaomi_service_data(XiaomiParseResult &result, const esp32_ble_tracke
   // Byte 2: length
   // Byte 3..3+len-1: data point value
 
-  const uint8_t *raw_data = &raw[raw_offset];
+  const uint8_t *raw = message.data() + result.raw_offset;
-  uint8_t data_offset = 0;
+  const uint8_t *data = raw + 3;
-  uint8_t data_length = raw.size() - raw_offset;
+  const uint8_t data_length = raw[2];
-  bool success = false;
 
-  while (true) {
+  if ((data_length < 1) || (data_length > 4)) {
-    if (data_length < 4)
+    ESP_LOGVV(TAG, "parse_xiaomi_message(): payload has wrong size (%d)!", data_length);
-      // at least 4 bytes required
-      // type, fixed 0x10, length, 1 byte value
-      break;
-
-    const uint8_t datapoint_type = raw_data[data_offset + 0];
-    const uint8_t datapoint_length = raw_data[data_offset + 2];
-
-    if (data_length < 3 + datapoint_length)
-      // 3 fixed bytes plus value length
-      break;
-
-    const uint8_t *datapoint_data = &raw_data[data_offset + 3];
-
-    if (parse_xiaomi_data_byte(datapoint_type, datapoint_data, datapoint_length, result))
-      success = true;
-
-    data_length -= data_offset + 3 + datapoint_length;
-    data_offset += 3 + datapoint_length;
-  }
-
-  return success;
-}
-optional<XiaomiParseResult> parse_xiaomi(const esp32_ble_tracker::ESPBTDevice &device) {
-  XiaomiParseResult result;
-  bool success = false;
-  for (auto &service_data : device.get_service_datas()) {
-    if (parse_xiaomi_service_data(result, service_data))
-      success = true;
-  }
-  if (!success)
-    return {};
-  return result;
-}
-
-bool XiaomiListener::parse_device(const esp32_ble_tracker::ESPBTDevice &device) {
-  auto res = parse_xiaomi(device);
-  if (!res.has_value())
     return false;
-
-  const char *name = "HHCCJCY01";
-  if (res->type == XiaomiParseResult::TYPE_LYWSDCGQ) {
-    name = "LYWSDCGQ";
-  } else if (res->type == XiaomiParseResult::TYPE_LYWSD02) {
-    name = "LYWSD02";
-  } else if (res->type == XiaomiParseResult::TYPE_CGG1) {
-    name = "CGG1";
   }
 
-  ESP_LOGD(TAG, "Got Xiaomi %s (%s):", name, device.address_str().c_str());
+  // motion detection, 1 byte, 8-bit unsigned integer
-
+  if ((raw[0] == 0x03) && (data_length == 1)) {
-  if (res->temperature.has_value()) {
+    result.has_motion = (data[0]) ? true : false;
-    ESP_LOGD(TAG, "  Temperature: %.1f°C", *res->temperature);
   }
-  if (res->humidity.has_value()) {
+  // temperature, 2 bytes, 16-bit signed integer (LE), 0.1 °C
-    ESP_LOGD(TAG, "  Humidity: %.1f%%", *res->humidity);
+  else if ((raw[0] == 0x04) && (data_length == 2)) {
+    const int16_t temperature = uint16_t(data[0]) | (uint16_t(data[1]) << 8);
+    result.temperature = temperature / 10.0f;
   }
-  if (res->battery_level.has_value()) {
+  // humidity, 2 bytes, 16-bit signed integer (LE), 0.1 %
-    ESP_LOGD(TAG, "  Battery Level: %.0f%%", *res->battery_level);
+  else if ((raw[0] == 0x06) && (data_length == 2)) {
+    const int16_t humidity = uint16_t(data[0]) | (uint16_t(data[1]) << 8);
+    result.humidity = humidity / 10.0f;
   }
-  if (res->conductivity.has_value()) {
+  // illuminance (+ motion), 3 bytes, 24-bit unsigned integer (LE), 1 lx
-    ESP_LOGD(TAG, "  Conductivity: %.0fµS/cm", *res->conductivity);
+  else if (((raw[0] == 0x07) || (raw[0] == 0x0F)) && (data_length == 3)) {
+    const uint32_t illuminance = uint32_t(data[0]) | (uint32_t(data[1]) << 8) | (uint32_t(data[2]) << 16);
+    result.illuminance = illuminance;
+    result.is_light = (illuminance == 100) ? true : false;
+    if (raw[0] == 0x0F)
+      result.has_motion = true;
   }
-  if (res->illuminance.has_value()) {
+  // soil moisture, 1 byte, 8-bit unsigned integer, 1 %
-    ESP_LOGD(TAG, "  Illuminance: %.0flx", *res->illuminance);
+  else if ((raw[0] == 0x08) && (data_length == 1)) {
+    result.moisture = data[0];
   }
-  if (res->moisture.has_value()) {
+  // conductivity, 2 bytes, 16-bit unsigned integer (LE), 1 µS/cm
-    ESP_LOGD(TAG, "  Moisture: %.0f%%", *res->moisture);
+  else if ((raw[0] == 0x09) && (data_length == 2)) {
+    const uint16_t conductivity = uint16_t(data[0]) | (uint16_t(data[1]) << 8);
+    result.conductivity = conductivity;
+  }
+  // battery, 1 byte, 8-bit unsigned integer, 1 %
+  else if ((raw[0] == 0x0A) && (data_length == 1)) {
+    result.battery_level = data[0];
+  }
+  // temperature + humidity, 4 bytes, 16-bit signed integer (LE) each, 0.1 °C, 0.1 %
+  else if ((raw[0] == 0x0D) && (data_length == 4)) {
+    const int16_t temperature = uint16_t(data[0]) | (uint16_t(data[1]) << 8);
+    const int16_t humidity = uint16_t(data[2]) | (uint16_t(data[3]) << 8);
+    result.temperature = temperature / 10.0f;
+    result.humidity = humidity / 10.0f;
+  }
+  // formaldehyde, 2 bytes, 16-bit unsigned integer (LE), 0.01 mg / m3
+  else if ((raw[0] == 0x10) && (data_length == 2)) {
+    const uint16_t formaldehyde = uint16_t(data[0]) | (uint16_t(data[1]) << 8);
+    result.formaldehyde = formaldehyde / 100.0f;
+  }
+  // on/off state, 1 byte, 8-bit unsigned integer
+  else if ((raw[0] == 0x12) && (data_length == 1)) {
+    result.is_active = (data[0]) ? true : false;
+  }
+  // mosquito tablet, 1 byte, 8-bit unsigned integer, 1 %
+  else if ((raw[0] == 0x13) && (data_length == 1)) {
+    result.tablet = data[0];
+  }
+  // idle time since last motion, 4 byte, 32-bit unsigned integer, 1 min
+  else if ((raw[0] == 0x17) && (data_length == 4)) {
+    const uint32_t idle_time =
+        uint32_t(data[0]) | (uint32_t(data[1]) << 8) | (uint32_t(data[2]) << 16) | (uint32_t(data[2]) << 24);
+    result.idle_time = idle_time / 60.0f;
+    result.has_motion = (idle_time) ? false : true;
+  } else {
+    return false;
   }
 
   return true;
 }
 
+optional<XiaomiParseResult> parse_xiaomi_header(const esp32_ble_tracker::ServiceData &service_data) {
+  XiaomiParseResult result;
+  if (!service_data.uuid.contains(0x95, 0xFE)) {
+    ESP_LOGVV(TAG, "parse_xiaomi_header(): no service data UUID magic bytes.");
+    return {};
+  }
+
+  auto raw = service_data.data;
+  result.has_data = (raw[0] & 0x40) ? true : false;
+  result.has_capability = (raw[0] & 0x20) ? true : false;
+  result.has_encryption = (raw[0] & 0x08) ? true : false;
+
+  if (!result.has_data) {
+    ESP_LOGVV(TAG, "parse_xiaomi_header(): service data has no DATA flag.");
+    return {};
+  }
+
+  static uint8_t last_frame_count = 0;
+  if (last_frame_count == raw[4]) {
+    ESP_LOGVV(TAG, "parse_xiaomi_header(): duplicate data packet received (%d).", static_cast<int>(last_frame_count));
+    result.is_duplicate = true;
+    return {};
+  }
+  last_frame_count = raw[4];
+  result.is_duplicate = false;
+  result.raw_offset = result.has_capability ? 12 : 11;
+
+  if ((raw[2] == 0x98) && (raw[3] == 0x00)) {  // MiFlora
+    result.type = XiaomiParseResult::TYPE_HHCCJCY01;
+    result.name = "HHCCJCY01";
+  } else if ((raw[2] == 0xaa) && (raw[3] == 0x01)) {  // round body, segment LCD
+    result.type = XiaomiParseResult::TYPE_LYWSDCGQ;
+    result.name = "LYWSDCGQ";
+  } else if ((raw[2] == 0x5d) && (raw[3] == 0x01)) {  // FlowerPot, RoPot
+    result.type = XiaomiParseResult::TYPE_HHCCPOT002;
+    result.name = "HHCCPOT002";
+  } else if ((raw[2] == 0xdf) && (raw[3] == 0x02)) {  // Xiaomi (Honeywell) formaldehyde sensor, OLED display
+    result.type = XiaomiParseResult::TYPE_JQJCY01YM;
+    result.name = "JQJCY01YM";
+  } else if ((raw[2] == 0xdd) && (raw[3] == 0x03)) {  // Philips/Xiaomi BLE nightlight
+    result.type = XiaomiParseResult::TYPE_MUE4094RT;
+    result.name = "MUE4094RT";
+    result.raw_offset -= 6;
+  } else if ((raw[2] == 0x47) && (raw[3] == 0x03)) {  // round body, e-ink display
+    result.type = XiaomiParseResult::TYPE_CGG1;
+    result.name = "CGG1";
+  } else if ((raw[2] == 0xbc) && (raw[3] == 0x03)) {  // VegTrug Grow Care Garden
+    result.type = XiaomiParseResult::TYPE_GCLS002;
+    result.name = "GCLS002";
+  } else if ((raw[2] == 0x5b) && (raw[3] == 0x04)) {  // rectangular body, e-ink display
+    result.type = XiaomiParseResult::TYPE_LYWSD02;
+    result.name = "LYWSD02";
+  } else if ((raw[2] == 0x0a) && (raw[3] == 0x04)) {  // Mosquito Repellent Smart Version
+    result.type = XiaomiParseResult::TYPE_WX08ZM;
+    result.name = "WX08ZM";
+  } else if ((raw[2] == 0x76) && (raw[3] == 0x05)) {  // Cleargrass (Qingping) alarm clock, segment LCD
+    result.type = XiaomiParseResult::TYPE_CGD1;
+    result.name = "CGD1";
+  } else if ((raw[2] == 0x5b) && (raw[3] == 0x05)) {  // small square body, segment LCD, encrypted
+    result.type = XiaomiParseResult::TYPE_LYWSD03MMC;
+    result.name = "LYWSD03MMC";
+  } else if ((raw[2] == 0xf6) && (raw[3] == 0x07)) {  // Xiaomi-Yeelight BLE nightlight
+    result.type = XiaomiParseResult::TYPE_MJYD02YLA;
+    result.name = "MJYD02YLA";
+    if (raw.size() == 19)
+      result.raw_offset -= 6;
+  } else {
+    ESP_LOGVV(TAG, "parse_xiaomi_header(): unknown device, no magic bytes.");
+    return {};
+  }
+
+  return result;
+}
+
+bool decrypt_xiaomi_payload(std::vector<uint8_t> &raw, const uint8_t *bindkey, const uint64_t &address) {
+  if (!((raw.size() == 19) || ((raw.size() >= 22) && (raw.size() <= 24)))) {
+    ESP_LOGVV(TAG, "decrypt_xiaomi_payload(): data packet has wrong size (%d)!", raw.size());
+    ESP_LOGVV(TAG, "  Packet : %s", hexencode(raw.data(), raw.size()).c_str());
+    return false;
+  }
+
+  uint8_t mac_reverse[6] = {0};
+  mac_reverse[5] = (uint8_t)(address >> 40);
+  mac_reverse[4] = (uint8_t)(address >> 32);
+  mac_reverse[3] = (uint8_t)(address >> 24);
+  mac_reverse[2] = (uint8_t)(address >> 16);
+  mac_reverse[1] = (uint8_t)(address >> 8);
+  mac_reverse[0] = (uint8_t)(address >> 0);
+
+  XiaomiAESVector vector{.key = {0},
+                         .plaintext = {0},
+                         .ciphertext = {0},
+                         .authdata = {0x11},
+                         .iv = {0},
+                         .tag = {0},
+                         .keysize = 16,
+                         .authsize = 1,
+                         .datasize = 0,
+                         .tagsize = 4,
+                         .ivsize = 12};
+
+  vector.datasize = (raw.size() == 19) ? raw.size() - 12 : raw.size() - 18;
+  int cipher_pos = (raw.size() == 19) ? 5 : 11;
+
+  const uint8_t *v = raw.data();
+
+  memcpy(vector.key, bindkey, vector.keysize);
+  memcpy(vector.ciphertext, v + cipher_pos, vector.datasize);
+  memcpy(vector.tag, v + raw.size() - vector.tagsize, vector.tagsize);
+  memcpy(vector.iv, mac_reverse, 6);             // MAC address reverse
+  memcpy(vector.iv + 6, v + 2, 3);               // sensor type (2) + packet id (1)
+  memcpy(vector.iv + 9, v + raw.size() - 7, 3);  // payload counter
+
+  mbedtls_ccm_context ctx;
+  mbedtls_ccm_init(&ctx);
+
+  int ret = mbedtls_ccm_setkey(&ctx, MBEDTLS_CIPHER_ID_AES, vector.key, vector.keysize * 8);
+  if (ret) {
+    ESP_LOGVV(TAG, "decrypt_xiaomi_payload(): mbedtls_ccm_setkey() failed.");
+    mbedtls_ccm_free(&ctx);
+    return false;
+  }
+
+  ret = mbedtls_ccm_auth_decrypt(&ctx, vector.datasize, vector.iv, vector.ivsize, vector.authdata, vector.authsize,
+                                 vector.ciphertext, vector.plaintext, vector.tag, vector.tagsize);
+  if (ret) {
+    uint8_t mac_address[6] = {0};
+    memcpy(mac_address, mac_reverse + 5, 1);
+    memcpy(mac_address + 1, mac_reverse + 4, 1);
+    memcpy(mac_address + 2, mac_reverse + 3, 1);
+    memcpy(mac_address + 3, mac_reverse + 2, 1);
+    memcpy(mac_address + 4, mac_reverse + 1, 1);
+    memcpy(mac_address + 5, mac_reverse, 1);
+    ESP_LOGVV(TAG, "decrypt_xiaomi_payload(): authenticated decryption failed.");
+    ESP_LOGVV(TAG, "  MAC address : %s", hexencode(mac_address, 6).c_str());
+    ESP_LOGVV(TAG, "       Packet : %s", hexencode(raw.data(), raw.size()).c_str());
+    ESP_LOGVV(TAG, "          Key : %s", hexencode(vector.key, vector.keysize).c_str());
+    ESP_LOGVV(TAG, "           Iv : %s", hexencode(vector.iv, vector.ivsize).c_str());
+    ESP_LOGVV(TAG, "       Cipher : %s", hexencode(vector.ciphertext, vector.datasize).c_str());
+    ESP_LOGVV(TAG, "          Tag : %s", hexencode(vector.tag, vector.tagsize).c_str());
+    mbedtls_ccm_free(&ctx);
+    return false;
+  }
+
+  // replace encrypted payload with plaintext
+  uint8_t *p = vector.plaintext;
+  for (std::vector<uint8_t>::iterator it = raw.begin() + cipher_pos; it != raw.begin() + cipher_pos + vector.datasize;
+       ++it) {
+    *it = *(p++);
+  }
+
+  // clear encrypted flag
+  raw[0] &= ~0x08;
+
+  ESP_LOGVV(TAG, "decrypt_xiaomi_payload(): authenticated decryption passed.");
+  ESP_LOGVV(TAG, "  Plaintext : %s, Packet : %d", hexencode(raw.data() + cipher_pos, vector.datasize).c_str(),
+            static_cast<int>(raw[4]));
+
+  mbedtls_ccm_free(&ctx);
+  return true;
+}
+
+bool report_xiaomi_results(const optional<XiaomiParseResult> &result, const std::string &address) {
+  if (!result.has_value()) {
+    ESP_LOGVV(TAG, "report_xiaomi_results(): no results available.");
+    return false;
+  }
+
+  ESP_LOGD(TAG, "Got Xiaomi %s (%s):", result->name.c_str(), address.c_str());
+
+  if (result->temperature.has_value()) {
+    ESP_LOGD(TAG, "  Temperature: %.1f°C", *result->temperature);
+  }
+  if (result->humidity.has_value()) {
+    ESP_LOGD(TAG, "  Humidity: %.1f%%", *result->humidity);
+  }
+  if (result->battery_level.has_value()) {
+    ESP_LOGD(TAG, "  Battery Level: %.0f%%", *result->battery_level);
+  }
+  if (result->conductivity.has_value()) {
+    ESP_LOGD(TAG, "  Conductivity: %.0fµS/cm", *result->conductivity);
+  }
+  if (result->illuminance.has_value()) {
+    ESP_LOGD(TAG, "  Illuminance: %.0flx", *result->illuminance);
+  }
+  if (result->moisture.has_value()) {
+    ESP_LOGD(TAG, "  Moisture: %.0f%%", *result->moisture);
+  }
+  if (result->tablet.has_value()) {
+    ESP_LOGD(TAG, "  Mosquito tablet: %.0f%%", *result->tablet);
+  }
+  if (result->is_active.has_value()) {
+    ESP_LOGD(TAG, "  Repellent: %s", (*result->is_active) ? "on" : "off");
+  }
+  if (result->has_motion.has_value()) {
+    ESP_LOGD(TAG, "  Motion: %s", (*result->has_motion) ? "yes" : "no");
+  }
+  if (result->is_light.has_value()) {
+    ESP_LOGD(TAG, "  Light: %s", (*result->is_light) ? "on" : "off");
+  }
+
+  return true;
+}
+
+bool XiaomiListener::parse_device(const esp32_ble_tracker::ESPBTDevice &device) {
+  // Previously the message was parsed twice per packet, once by XiaomiListener::parse_device()
+  // and then again by the respective device class's parse_device() function. Parsing the header
+  // here and then for each device seems to be unneccessary and complicates the duplicate packet filtering.
+  // Hence I disabled the call to parse_xiaomi_header() here and the message parsing is done entirely
+  // in the respecive device instance. The XiaomiListener class is defined in __init__.py and I was not
+  // able to remove it entirely.
+
+  return false;  // with true it's not showing device scans
+}
+
 }  // namespace xiaomi_ble
 }  // namespace esphome
 

esphome/components/xiaomi_ble/xiaomi_ble.h

@@ -9,18 +9,58 @@ namespace esphome {
 namespace xiaomi_ble {
 
 struct XiaomiParseResult {
-  enum { TYPE_LYWSDCGQ, TYPE_HHCCJCY01, TYPE_LYWSD02, TYPE_CGG1 } type;
+  enum {
+    TYPE_HHCCJCY01,
+    TYPE_GCLS002,
+    TYPE_HHCCPOT002,
+    TYPE_LYWSDCGQ,
+    TYPE_LYWSD02,
+    TYPE_CGG1,
+    TYPE_LYWSD03MMC,
+    TYPE_CGD1,
+    TYPE_JQJCY01YM,
+    TYPE_MUE4094RT,
+    TYPE_WX08ZM,
+    TYPE_MJYD02YLA
+  } type;
+  std::string name;
   optional<float> temperature;
   optional<float> humidity;
-  optional<float> battery_level;
+  optional<float> moisture;
   optional<float> conductivity;
   optional<float> illuminance;
-  optional<float> moisture;
+  optional<float> formaldehyde;
+  optional<float> battery_level;
+  optional<float> tablet;
+  optional<float> idle_time;
+  optional<bool> is_active;
+  optional<bool> has_motion;
+  optional<bool> is_light;
+  bool has_data;        // 0x40
+  bool has_capability;  // 0x20
+  bool has_encryption;  // 0x08
+  bool is_duplicate;
+  int raw_offset;
 };
 
-bool parse_xiaomi_data_byte(uint8_t data_type, const uint8_t *data, uint8_t data_length, XiaomiParseResult &result);
+struct XiaomiAESVector {
+  uint8_t key[16];
+  uint8_t plaintext[16];
+  uint8_t ciphertext[16];
+  uint8_t authdata[16];
+  uint8_t iv[16];
+  uint8_t tag[16];
+  size_t keysize;
+  size_t authsize;
+  size_t datasize;
+  size_t tagsize;
+  size_t ivsize;
+};
 
-optional<XiaomiParseResult> parse_xiaomi(const esp32_ble_tracker::ESPBTDevice &device);
+bool parse_xiaomi_message(const std::vector<uint8_t> &message, XiaomiParseResult &result);
+optional<XiaomiParseResult> parse_xiaomi_header(const esp32_ble_tracker::ServiceData &service_data);
+bool decrypt_xiaomi_payload(std::vector<uint8_t> &raw, const uint8_t *bindkey, const uint64_t &address);
+bool report_xiaomi_results(const optional<XiaomiParseResult> &result, const std::string &address);
 
 class XiaomiListener : public esp32_ble_tracker::ESPBTDeviceListener {
  public:

esphome/components/xiaomi_cgd1/sensor.py

@@ -0,0 +1,43 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import sensor, esp32_ble_tracker
+from esphome.const import CONF_BATTERY_LEVEL, CONF_HUMIDITY, CONF_MAC_ADDRESS, CONF_TEMPERATURE, \
+    UNIT_CELSIUS, ICON_THERMOMETER, UNIT_PERCENT, ICON_WATER_PERCENT, ICON_BATTERY, CONF_ID, \
+    CONF_BINDKEY
+
+DEPENDENCIES = ['esp32_ble_tracker']
+AUTO_LOAD = ['xiaomi_ble']
+
+xiaomi_cgd1_ns = cg.esphome_ns.namespace('xiaomi_cgd1')
+XiaomiCGD1 = xiaomi_cgd1_ns.class_('XiaomiCGD1', esp32_ble_tracker.ESPBTDeviceListener,
+                                   cg.Component)
+
+CONFIG_SCHEMA = cv.Schema({
+    cv.GenerateID(): cv.declare_id(XiaomiCGD1),
+    cv.Required(CONF_BINDKEY): cv.bind_key,
+    cv.Required(CONF_MAC_ADDRESS): cv.mac_address,
+    cv.Optional(CONF_TEMPERATURE): sensor.sensor_schema(UNIT_CELSIUS, ICON_THERMOMETER, 1),
+    cv.Optional(CONF_HUMIDITY): sensor.sensor_schema(UNIT_PERCENT, ICON_WATER_PERCENT, 1),
+    cv.Optional(CONF_BATTERY_LEVEL): sensor.sensor_schema(UNIT_PERCENT, ICON_BATTERY, 0),
+}).extend(esp32_ble_tracker.ESP_BLE_DEVICE_SCHEMA).extend(cv.COMPONENT_SCHEMA)
+
+
+def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    yield cg.register_component(var, config)
+    yield esp32_ble_tracker.register_ble_device(var, config)
+
+    cg.add(var.set_address(config[CONF_MAC_ADDRESS].as_hex))
+    cg.add(var.set_bindkey(config[CONF_BINDKEY]))
+
+    if CONF_TEMPERATURE in config:
+        sens = yield sensor.new_sensor(config[CONF_TEMPERATURE])
+        cg.add(var.set_temperature(sens))
+    if CONF_HUMIDITY in config:
+        sens = yield sensor.new_sensor(config[CONF_HUMIDITY])
+        cg.add(var.set_humidity(sens))
+    if CONF_BATTERY_LEVEL in config:
+        sens = yield sensor.new_sensor(config[CONF_BATTERY_LEVEL])
+        cg.add(var.set_battery_level(sens))
+
+    cg.add_library("mbedtls", "cdf462088d")

esphome/components/xiaomi_cgd1/xiaomi_cgd1.cpp

@@ -0,0 +1,77 @@
+#include "xiaomi_cgd1.h"
+#include "esphome/core/log.h"
+
+#ifdef ARDUINO_ARCH_ESP32
+
+namespace esphome {
+namespace xiaomi_cgd1 {
+
+static const char *TAG = "xiaomi_cgd1";
+
+void XiaomiCGD1::dump_config() {
+  ESP_LOGCONFIG(TAG, "Xiaomi CGD1");
+  ESP_LOGCONFIG(TAG, "  Bindkey: %s", hexencode(this->bindkey_, 16).c_str());
+  LOG_SENSOR("  ", "Temperature", this->temperature_);
+  LOG_SENSOR("  ", "Humidity", this->humidity_);
+  LOG_SENSOR("  ", "Battery Level", this->battery_level_);
+}
+
+bool XiaomiCGD1::parse_device(const esp32_ble_tracker::ESPBTDevice &device) {
+  if (device.address_uint64() != this->address_) {
+    ESP_LOGVV(TAG, "parse_device(): unknown MAC address.");
+    return false;
+  }
+  ESP_LOGVV(TAG, "parse_device(): MAC address %s found.", device.address_str().c_str());
+
+  bool success = false;
+  for (auto &service_data : device.get_service_datas()) {
+    auto res = xiaomi_ble::parse_xiaomi_header(service_data);
+    if (!res.has_value()) {
+      continue;
+    }
+    if (res->is_duplicate) {
+      continue;
+    }
+    if (res->has_encryption &&
+        (!(xiaomi_ble::decrypt_xiaomi_payload(const_cast<std::vector<uint8_t> &>(service_data.data), this->bindkey_,
+                                              this->address_)))) {
+      continue;
+    }
+    if (!(xiaomi_ble::parse_xiaomi_message(service_data.data, *res))) {
+      continue;
+    }
+    if (!(xiaomi_ble::report_xiaomi_results(res, device.address_str()))) {
+      continue;
+    }
+    if (res->temperature.has_value() && this->temperature_ != nullptr)
+      this->temperature_->publish_state(*res->temperature);
+    if (res->humidity.has_value() && this->humidity_ != nullptr)
+      this->humidity_->publish_state(*res->humidity);
+    if (res->battery_level.has_value() && this->battery_level_ != nullptr)
+      this->battery_level_->publish_state(*res->battery_level);
+    success = true;
+  }
+
+  if (!success) {
+    return false;
+  }
+
+  return true;
+}
+
+void XiaomiCGD1::set_bindkey(const std::string &bindkey) {
+  memset(bindkey_, 0, 16);
+  if (bindkey.size() != 32) {
+    return;
+  }
+  char temp[3] = {0};
+  for (int i = 0; i < 16; i++) {
+    strncpy(temp, &(bindkey.c_str()[i * 2]), 2);
+    bindkey_[i] = std::strtoul(temp, NULL, 16);
+  }
+}
+
+}  // namespace xiaomi_cgd1
+}  // namespace esphome
+
+#endif

esphome/components/xiaomi_cgd1/xiaomi_cgd1.h

@@ -0,0 +1,36 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/components/esp32_ble_tracker/esp32_ble_tracker.h"
+#include "esphome/components/xiaomi_ble/xiaomi_ble.h"
+
+#ifdef ARDUINO_ARCH_ESP32
+
+namespace esphome {
+namespace xiaomi_cgd1 {
+
+class XiaomiCGD1 : public Component, public esp32_ble_tracker::ESPBTDeviceListener {
+ public:
+  void set_address(uint64_t address) { address_ = address; };
+  void set_bindkey(const std::string &bindkey);
+
+  bool parse_device(const esp32_ble_tracker::ESPBTDevice &device) override;
+  void dump_config() override;
+  float get_setup_priority() const override { return setup_priority::DATA; }
+  void set_temperature(sensor::Sensor *temperature) { temperature_ = temperature; }
+  void set_humidity(sensor::Sensor *humidity) { humidity_ = humidity; }
+  void set_battery_level(sensor::Sensor *battery_level) { battery_level_ = battery_level; }
+
+ protected:
+  uint64_t address_;
+  uint8_t bindkey_[16];
+  sensor::Sensor *temperature_{nullptr};
+  sensor::Sensor *humidity_{nullptr};
+  sensor::Sensor *battery_level_{nullptr};
+};
+
+}  // namespace xiaomi_cgd1
+}  // namespace esphome
+
+#endif

esphome/components/xiaomi_cgg1/xiaomi_cgg1.cpp

@@ -15,6 +15,48 @@ void XiaomiCGG1::dump_config() {
   LOG_SENSOR("  ", "Battery Level", this->battery_level_);
 }
 
+bool XiaomiCGG1::parse_device(const esp32_ble_tracker::ESPBTDevice &device) {
+  if (device.address_uint64() != this->address_) {
+    ESP_LOGVV(TAG, "parse_device(): unknown MAC address.");
+    return false;
+  }
+  ESP_LOGVV(TAG, "parse_device(): MAC address %s found.", device.address_str().c_str());
+
+  bool success = false;
+  for (auto &service_data : device.get_service_datas()) {
+    auto res = xiaomi_ble::parse_xiaomi_header(service_data);
+    if (!res.has_value()) {
+      continue;
+    }
+    if (res->is_duplicate) {
+      continue;
+    }
+    if (res->has_encryption) {
+      ESP_LOGVV(TAG, "parse_device(): payload decryption is currently not supported on this device.");
+      continue;
+    }
+    if (!(xiaomi_ble::parse_xiaomi_message(service_data.data, *res))) {
+      continue;
+    }
+    if (!(xiaomi_ble::report_xiaomi_results(res, device.address_str()))) {
+      continue;
+    }
+    if (res->temperature.has_value() && this->temperature_ != nullptr)
+      this->temperature_->publish_state(*res->temperature);
+    if (res->humidity.has_value() && this->humidity_ != nullptr)
+      this->humidity_->publish_state(*res->humidity);
+    if (res->battery_level.has_value() && this->battery_level_ != nullptr)
+      this->battery_level_->publish_state(*res->battery_level);
+    success = true;
+  }
+
+  if (!success) {
+    return false;
+  }
+
+  return true;
+}
+
 }  // namespace xiaomi_cgg1
 }  // namespace esphome
 

esphome/components/xiaomi_cgg1/xiaomi_cgg1.h

@@ -14,22 +14,7 @@ class XiaomiCGG1 : public Component, public esp32_ble_tracker::ESPBTDeviceListen
  public:
   void set_address(uint64_t address) { address_ = address; }
 
-  bool parse_device(const esp32_ble_tracker::ESPBTDevice &device) override {
+  bool parse_device(const esp32_ble_tracker::ESPBTDevice &device) override;
-    if (device.address_uint64() != this->address_)
-      return false;
-
-    auto res = xiaomi_ble::parse_xiaomi(device);
-    if (!res.has_value())
-      return false;
-
-    if (res->temperature.has_value() && this->temperature_ != nullptr)
-      this->temperature_->publish_state(*res->temperature);
-    if (res->humidity.has_value() && this->humidity_ != nullptr)
-      this->humidity_->publish_state(*res->humidity);
-    if (res->battery_level.has_value() && this->battery_level_ != nullptr)
-      this->battery_level_->publish_state(*res->battery_level);
-    return true;
-  }
 
   void dump_config() override;
   float get_setup_priority() const override { return setup_priority::DATA; }

esphome/components/xiaomi_gcls002/sensor.py

@@ -0,0 +1,45 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import sensor, esp32_ble_tracker
+from esphome.const import CONF_MAC_ADDRESS, CONF_TEMPERATURE, \
+    UNIT_CELSIUS, ICON_THERMOMETER, UNIT_PERCENT, ICON_WATER_PERCENT, CONF_ID, \
+    CONF_MOISTURE, CONF_ILLUMINANCE, ICON_BRIGHTNESS_5, UNIT_LUX, CONF_CONDUCTIVITY, \
+    UNIT_MICROSIEMENS_PER_CENTIMETER, ICON_FLOWER
+
+DEPENDENCIES = ['esp32_ble_tracker']
+AUTO_LOAD = ['xiaomi_ble']
+
+xiaomi_gcls002_ns = cg.esphome_ns.namespace('xiaomi_gcls002')
+XiaomiGCLS002 = xiaomi_gcls002_ns.class_('XiaomiGCLS002',
+                                         esp32_ble_tracker.ESPBTDeviceListener, cg.Component)
+
+CONFIG_SCHEMA = cv.Schema({
+    cv.GenerateID(): cv.declare_id(XiaomiGCLS002),
+    cv.Required(CONF_MAC_ADDRESS): cv.mac_address,
+    cv.Optional(CONF_TEMPERATURE): sensor.sensor_schema(UNIT_CELSIUS, ICON_THERMOMETER, 1),
+    cv.Optional(CONF_MOISTURE): sensor.sensor_schema(UNIT_PERCENT, ICON_WATER_PERCENT, 0),
+    cv.Optional(CONF_ILLUMINANCE): sensor.sensor_schema(UNIT_LUX, ICON_BRIGHTNESS_5, 0),
+    cv.Optional(CONF_CONDUCTIVITY):
+        sensor.sensor_schema(UNIT_MICROSIEMENS_PER_CENTIMETER, ICON_FLOWER, 0),
+}).extend(esp32_ble_tracker.ESP_BLE_DEVICE_SCHEMA).extend(cv.COMPONENT_SCHEMA)
+
+
+def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    yield cg.register_component(var, config)
+    yield esp32_ble_tracker.register_ble_device(var, config)
+
+    cg.add(var.set_address(config[CONF_MAC_ADDRESS].as_hex))
+
+    if CONF_TEMPERATURE in config:
+        sens = yield sensor.new_sensor(config[CONF_TEMPERATURE])
+        cg.add(var.set_temperature(sens))
+    if CONF_MOISTURE in config:
+        sens = yield sensor.new_sensor(config[CONF_MOISTURE])
+        cg.add(var.set_moisture(sens))
+    if CONF_ILLUMINANCE in config:
+        sens = yield sensor.new_sensor(config[CONF_ILLUMINANCE])
+        cg.add(var.set_illuminance(sens))
+    if CONF_CONDUCTIVITY in config:
+        sens = yield sensor.new_sensor(config[CONF_CONDUCTIVITY])
+        cg.add(var.set_conductivity(sens))

esphome/components/xiaomi_gcls002/xiaomi_gcls002.cpp

@@ -0,0 +1,66 @@
+#include "xiaomi_gcls002.h"
+#include "esphome/core/log.h"
+
+#ifdef ARDUINO_ARCH_ESP32
+
+namespace esphome {
+namespace xiaomi_gcls002 {
+
+static const char *TAG = "xiaomi_gcls002";
+
+void XiaomiGCLS002::dump_config() {
+  ESP_LOGCONFIG(TAG, "Xiaomi GCLS002");
+  LOG_SENSOR("  ", "Temperature", this->temperature_);
+  LOG_SENSOR("  ", "Moisture", this->moisture_);
+  LOG_SENSOR("  ", "Conductivity", this->conductivity_);
+  LOG_SENSOR("  ", "Illuminance", this->illuminance_);
+}
+
+bool XiaomiGCLS002::parse_device(const esp32_ble_tracker::ESPBTDevice &device) {
+  if (device.address_uint64() != this->address_) {
+    ESP_LOGVV(TAG, "parse_device(): unknown MAC address.");
+    return false;
+  }
+  ESP_LOGVV(TAG, "parse_device(): MAC address %s found.", device.address_str().c_str());
+
+  bool success = false;
+  for (auto &service_data : device.get_service_datas()) {
+    auto res = xiaomi_ble::parse_xiaomi_header(service_data);
+    if (!res.has_value()) {
+      continue;
+    }
+    if (res->is_duplicate) {
+      continue;
+    }
+    if (res->has_encryption) {
+      ESP_LOGVV(TAG, "parse_device(): payload decryption is currently not supported on this device.");
+      continue;
+    }
+    if (!(xiaomi_ble::parse_xiaomi_message(service_data.data, *res))) {
+      continue;
+    }
+    if (!(xiaomi_ble::report_xiaomi_results(res, device.address_str()))) {
+      continue;
+    }
+    if (res->temperature.has_value() && this->temperature_ != nullptr)
+      this->temperature_->publish_state(*res->temperature);
+    if (res->moisture.has_value() && this->moisture_ != nullptr)
+      this->moisture_->publish_state(*res->moisture);
+    if (res->conductivity.has_value() && this->conductivity_ != nullptr)
+      this->conductivity_->publish_state(*res->conductivity);
+    if (res->illuminance.has_value() && this->illuminance_ != nullptr)
+      this->illuminance_->publish_state(*res->illuminance);
+    success = true;
+  }
+
+  if (!success) {
+    return false;
+  }
+
+  return true;
+}
+
+}  // namespace xiaomi_gcls002
+}  // namespace esphome
+
+#endif

esphome/components/xiaomi_gcls002/xiaomi_gcls002.h

@@ -0,0 +1,37 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/components/esp32_ble_tracker/esp32_ble_tracker.h"
+#include "esphome/components/xiaomi_ble/xiaomi_ble.h"
+
+#ifdef ARDUINO_ARCH_ESP32
+
+namespace esphome {
+namespace xiaomi_gcls002 {
+
+class XiaomiGCLS002 : public Component, public esp32_ble_tracker::ESPBTDeviceListener {
+ public:
+  void set_address(uint64_t address) { address_ = address; }
+
+  bool parse_device(const esp32_ble_tracker::ESPBTDevice &device) override;
+
+  void dump_config() override;
+  float get_setup_priority() const override { return setup_priority::DATA; }
+  void set_temperature(sensor::Sensor *temperature) { temperature_ = temperature; }
+  void set_moisture(sensor::Sensor *moisture) { moisture_ = moisture; }
+  void set_conductivity(sensor::Sensor *conductivity) { conductivity_ = conductivity; }
+  void set_illuminance(sensor::Sensor *illuminance) { illuminance_ = illuminance; }
+
+ protected:
+  uint64_t address_;
+  sensor::Sensor *temperature_{nullptr};
+  sensor::Sensor *moisture_{nullptr};
+  sensor::Sensor *conductivity_{nullptr};
+  sensor::Sensor *illuminance_{nullptr};
+};
+
+}  // namespace xiaomi_gcls002
+}  // namespace esphome
+
+#endif

esphome/components/xiaomi_hhccjcy01/sensor.py

@@ -1,8 +1,8 @@
 import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome.components import sensor, esp32_ble_tracker
-from esphome.const import CONF_BATTERY_LEVEL, CONF_MAC_ADDRESS, CONF_TEMPERATURE, \
+from esphome.const import CONF_MAC_ADDRESS, CONF_TEMPERATURE, \
-    UNIT_CELSIUS, ICON_THERMOMETER, UNIT_PERCENT, ICON_WATER_PERCENT, ICON_BATTERY, CONF_ID, \
+    UNIT_CELSIUS, ICON_THERMOMETER, UNIT_PERCENT, ICON_WATER_PERCENT, CONF_ID, \
     CONF_MOISTURE, CONF_ILLUMINANCE, ICON_BRIGHTNESS_5, UNIT_LUX, CONF_CONDUCTIVITY, \
     UNIT_MICROSIEMENS_PER_CENTIMETER, ICON_FLOWER
 
@@ -21,7 +21,6 @@ CONFIG_SCHEMA = cv.Schema({
     cv.Optional(CONF_ILLUMINANCE): sensor.sensor_schema(UNIT_LUX, ICON_BRIGHTNESS_5, 0),
     cv.Optional(CONF_CONDUCTIVITY):
         sensor.sensor_schema(UNIT_MICROSIEMENS_PER_CENTIMETER, ICON_FLOWER, 0),
-    cv.Optional(CONF_BATTERY_LEVEL): sensor.sensor_schema(UNIT_PERCENT, ICON_BATTERY, 0),
 }).extend(esp32_ble_tracker.ESP_BLE_DEVICE_SCHEMA).extend(cv.COMPONENT_SCHEMA)
 
 
@@ -44,6 +43,3 @@ def to_code(config):
     if CONF_CONDUCTIVITY in config:
         sens = yield sensor.new_sensor(config[CONF_CONDUCTIVITY])
         cg.add(var.set_conductivity(sens))
-    if CONF_BATTERY_LEVEL in config:
-        sens = yield sensor.new_sensor(config[CONF_BATTERY_LEVEL])
-        cg.add(var.set_battery_level(sens))

esphome/components/xiaomi_hhccjcy01/xiaomi_hhccjcy01.cpp

@@ -14,7 +14,50 @@ void XiaomiHHCCJCY01::dump_config() {
   LOG_SENSOR("  ", "Moisture", this->moisture_);
   LOG_SENSOR("  ", "Conductivity", this->conductivity_);
   LOG_SENSOR("  ", "Illuminance", this->illuminance_);
-  LOG_SENSOR("  ", "Battery Level", this->battery_level_);
+}
+
+bool XiaomiHHCCJCY01::parse_device(const esp32_ble_tracker::ESPBTDevice &device) {
+  if (device.address_uint64() != this->address_) {
+    ESP_LOGVV(TAG, "parse_device(): unknown MAC address.");
+    return false;
+  }
+  ESP_LOGVV(TAG, "parse_device(): MAC address %s found.", device.address_str().c_str());
+
+  bool success = false;
+  for (auto &service_data : device.get_service_datas()) {
+    auto res = xiaomi_ble::parse_xiaomi_header(service_data);
+    if (!res.has_value()) {
+      continue;
+    }
+    if (res->is_duplicate) {
+      continue;
+    }
+    if (res->has_encryption) {
+      ESP_LOGVV(TAG, "parse_device(): payload decryption is currently not supported on this device.");
+      continue;
+    }
+    if (!(xiaomi_ble::parse_xiaomi_message(service_data.data, *res))) {
+      continue;
+    }
+    if (!(xiaomi_ble::report_xiaomi_results(res, device.address_str()))) {
+      continue;
+    }
+    if (res->temperature.has_value() && this->temperature_ != nullptr)
+      this->temperature_->publish_state(*res->temperature);
+    if (res->moisture.has_value() && this->moisture_ != nullptr)
+      this->moisture_->publish_state(*res->moisture);
+    if (res->conductivity.has_value() && this->conductivity_ != nullptr)
+      this->conductivity_->publish_state(*res->conductivity);
+    if (res->illuminance.has_value() && this->illuminance_ != nullptr)
+      this->illuminance_->publish_state(*res->illuminance);
+    success = true;
+  }
+
+  if (!success) {
+    return false;
+  }
+
+  return true;
 }
 
 }  // namespace xiaomi_hhccjcy01

esphome/components/xiaomi_hhccjcy01/xiaomi_hhccjcy01.h

@@ -14,26 +14,7 @@ class XiaomiHHCCJCY01 : public Component, public esp32_ble_tracker::ESPBTDeviceL
  public:
   void set_address(uint64_t address) { address_ = address; }
 
-  bool parse_device(const esp32_ble_tracker::ESPBTDevice &device) override {
+  bool parse_device(const esp32_ble_tracker::ESPBTDevice &device) override;
-    if (device.address_uint64() != this->address_)
-      return false;
-
-    auto res = xiaomi_ble::parse_xiaomi(device);
-    if (!res.has_value())
-      return false;
-
-    if (res->temperature.has_value() && this->temperature_ != nullptr)
-      this->temperature_->publish_state(*res->temperature);
-    if (res->moisture.has_value() && this->moisture_ != nullptr)
-      this->moisture_->publish_state(*res->moisture);
-    if (res->conductivity.has_value() && this->conductivity_ != nullptr)
-      this->conductivity_->publish_state(*res->conductivity);
-    if (res->illuminance.has_value() && this->illuminance_ != nullptr)
-      this->illuminance_->publish_state(*res->illuminance);
-    if (res->battery_level.has_value() && this->battery_level_ != nullptr)
-      this->battery_level_->publish_state(*res->battery_level);
-    return true;
-  }
 
   void dump_config() override;
   float get_setup_priority() const override { return setup_priority::DATA; }
@@ -41,7 +22,6 @@ class XiaomiHHCCJCY01 : public Component, public esp32_ble_tracker::ESPBTDeviceL
   void set_moisture(sensor::Sensor *moisture) { moisture_ = moisture; }
   void set_conductivity(sensor::Sensor *conductivity) { conductivity_ = conductivity; }
   void set_illuminance(sensor::Sensor *illuminance) { illuminance_ = illuminance; }
-  void set_battery_level(sensor::Sensor *battery_level) { battery_level_ = battery_level; }
 
  protected:
   uint64_t address_;
@@ -49,7 +29,6 @@ class XiaomiHHCCJCY01 : public Component, public esp32_ble_tracker::ESPBTDeviceL
   sensor::Sensor *moisture_{nullptr};
   sensor::Sensor *conductivity_{nullptr};
   sensor::Sensor *illuminance_{nullptr};
-  sensor::Sensor *battery_level_{nullptr};
 };
 
 }  // namespace xiaomi_hhccjcy01

esphome/components/xiaomi_hhccpot002/sensor.py

@@ -0,0 +1,35 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import sensor, esp32_ble_tracker
+from esphome.const import CONF_MAC_ADDRESS, UNIT_PERCENT, ICON_WATER_PERCENT, CONF_ID, \
+    CONF_MOISTURE, CONF_CONDUCTIVITY, UNIT_MICROSIEMENS_PER_CENTIMETER, ICON_FLOWER
+
+DEPENDENCIES = ['esp32_ble_tracker']
+AUTO_LOAD = ['xiaomi_ble']
+
+xiaomi_hhccpot002_ns = cg.esphome_ns.namespace('xiaomi_hhccpot002')
+XiaomiHHCCPOT002 = xiaomi_hhccpot002_ns.class_('XiaomiHHCCPOT002',
+                                               esp32_ble_tracker.ESPBTDeviceListener, cg.Component)
+
+CONFIG_SCHEMA = cv.Schema({
+    cv.GenerateID(): cv.declare_id(XiaomiHHCCPOT002),
+    cv.Required(CONF_MAC_ADDRESS): cv.mac_address,
+    cv.Optional(CONF_MOISTURE): sensor.sensor_schema(UNIT_PERCENT, ICON_WATER_PERCENT, 0),
+    cv.Optional(CONF_CONDUCTIVITY):
+        sensor.sensor_schema(UNIT_MICROSIEMENS_PER_CENTIMETER, ICON_FLOWER, 0),
+}).extend(esp32_ble_tracker.ESP_BLE_DEVICE_SCHEMA).extend(cv.COMPONENT_SCHEMA)
+
+
+def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    yield cg.register_component(var, config)
+    yield esp32_ble_tracker.register_ble_device(var, config)
+
+    cg.add(var.set_address(config[CONF_MAC_ADDRESS].as_hex))
+
+    if CONF_MOISTURE in config:
+        sens = yield sensor.new_sensor(config[CONF_MOISTURE])
+        cg.add(var.set_moisture(sens))
+    if CONF_CONDUCTIVITY in config:
+        sens = yield sensor.new_sensor(config[CONF_CONDUCTIVITY])
+        cg.add(var.set_conductivity(sens))

esphome/components/xiaomi_hhccpot002/xiaomi_hhccpot002.cpp

@@ -0,0 +1,60 @@
+#include "xiaomi_hhccpot002.h"
+#include "esphome/core/log.h"
+
+#ifdef ARDUINO_ARCH_ESP32
+
+namespace esphome {
+namespace xiaomi_hhccpot002 {
+
+static const char *TAG = "xiaomi_hhccpot002";
+
+void XiaomiHHCCPOT002 ::dump_config() {
+  ESP_LOGCONFIG(TAG, "Xiaomi HHCCPOT002");
+  LOG_SENSOR("  ", "Moisture", this->moisture_);
+  LOG_SENSOR("  ", "Conductivity", this->conductivity_);
+}
+
+bool XiaomiHHCCPOT002::parse_device(const esp32_ble_tracker::ESPBTDevice &device) {
+  if (device.address_uint64() != this->address_) {
+    ESP_LOGVV(TAG, "parse_device(): unknown MAC address.");
+    return false;
+  }
+  ESP_LOGVV(TAG, "parse_device(): MAC address %s found.", device.address_str().c_str());
+
+  bool success = false;
+  for (auto &service_data : device.get_service_datas()) {
+    auto res = xiaomi_ble::parse_xiaomi_header(service_data);
+    if (!res.has_value()) {
+      continue;
+    }
+    if (res->is_duplicate) {
+      continue;
+    }
+    if (res->has_encryption) {
+      ESP_LOGVV(TAG, "parse_device(): payload decryption is currently not supported on this device.");
+      continue;
+    }
+    if (!(xiaomi_ble::parse_xiaomi_message(service_data.data, *res))) {
+      continue;
+    }
+    if (!(xiaomi_ble::report_xiaomi_results(res, device.address_str()))) {
+      continue;
+    }
+    if (res->moisture.has_value() && this->moisture_ != nullptr)
+      this->moisture_->publish_state(*res->moisture);
+    if (res->conductivity.has_value() && this->conductivity_ != nullptr)
+      this->conductivity_->publish_state(*res->conductivity);
+    success = true;
+  }
+
+  if (!success) {
+    return false;
+  }
+
+  return true;
+}
+
+}  // namespace xiaomi_hhccpot002
+}  // namespace esphome
+
+#endif

esphome/components/xiaomi_hhccpot002/xiaomi_hhccpot002.h

@@ -0,0 +1,33 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/components/esp32_ble_tracker/esp32_ble_tracker.h"
+#include "esphome/components/xiaomi_ble/xiaomi_ble.h"
+
+#ifdef ARDUINO_ARCH_ESP32
+
+namespace esphome {
+namespace xiaomi_hhccpot002 {
+
+class XiaomiHHCCPOT002 : public Component, public esp32_ble_tracker::ESPBTDeviceListener {
+ public:
+  void set_address(uint64_t address) { address_ = address; }
+
+  bool parse_device(const esp32_ble_tracker::ESPBTDevice &device) override;
+
+  void dump_config() override;
+  float get_setup_priority() const override { return setup_priority::DATA; }
+  void set_moisture(sensor::Sensor *moisture) { moisture_ = moisture; }
+  void set_conductivity(sensor::Sensor *conductivity) { conductivity_ = conductivity; }
+
+ protected:
+  uint64_t address_;
+  sensor::Sensor *moisture_{nullptr};
+  sensor::Sensor *conductivity_{nullptr};
+};
+
+}  // namespace xiaomi_hhccpot002
+}  // namespace esphome
+
+#endif

esphome/components/xiaomi_jqjcy01ym/sensor.py

@@ -0,0 +1,44 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import sensor, esp32_ble_tracker
+from esphome.const import CONF_BATTERY_LEVEL, CONF_MAC_ADDRESS, CONF_TEMPERATURE, \
+    UNIT_CELSIUS, ICON_THERMOMETER, UNIT_PERCENT, ICON_WATER_PERCENT, ICON_BATTERY, CONF_ID, \
+    CONF_HUMIDITY, UNIT_MILLIGRAMS_PER_CUBIC_METER, ICON_FLASK_OUTLINE, CONF_FORMALDEHYDE
+
+DEPENDENCIES = ['esp32_ble_tracker']
+AUTO_LOAD = ['xiaomi_ble']
+
+xiaomi_jqjcy01ym_ns = cg.esphome_ns.namespace('xiaomi_jqjcy01ym')
+XiaomiJQJCY01YM = xiaomi_jqjcy01ym_ns.class_('XiaomiJQJCY01YM',
+                                             esp32_ble_tracker.ESPBTDeviceListener, cg.Component)
+
+CONFIG_SCHEMA = cv.Schema({
+    cv.GenerateID(): cv.declare_id(XiaomiJQJCY01YM),
+    cv.Required(CONF_MAC_ADDRESS): cv.mac_address,
+    cv.Optional(CONF_TEMPERATURE): sensor.sensor_schema(UNIT_CELSIUS, ICON_THERMOMETER, 1),
+    cv.Optional(CONF_HUMIDITY): sensor.sensor_schema(UNIT_PERCENT, ICON_WATER_PERCENT, 0),
+    cv.Optional(CONF_FORMALDEHYDE):
+        sensor.sensor_schema(UNIT_MILLIGRAMS_PER_CUBIC_METER, ICON_FLASK_OUTLINE, 2),
+    cv.Optional(CONF_BATTERY_LEVEL): sensor.sensor_schema(UNIT_PERCENT, ICON_BATTERY, 0),
+}).extend(esp32_ble_tracker.ESP_BLE_DEVICE_SCHEMA).extend(cv.COMPONENT_SCHEMA)
+
+
+def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    yield cg.register_component(var, config)
+    yield esp32_ble_tracker.register_ble_device(var, config)
+
+    cg.add(var.set_address(config[CONF_MAC_ADDRESS].as_hex))
+
+    if CONF_TEMPERATURE in config:
+        sens = yield sensor.new_sensor(config[CONF_TEMPERATURE])
+        cg.add(var.set_temperature(sens))
+    if CONF_HUMIDITY in config:
+        sens = yield sensor.new_sensor(config[CONF_HUMIDITY])
+        cg.add(var.set_humidity(sens))
+    if CONF_FORMALDEHYDE in config:
+        sens = yield sensor.new_sensor(config[CONF_FORMALDEHYDE])
+        cg.add(var.set_formaldehyde(sens))
+    if CONF_BATTERY_LEVEL in config:
+        sens = yield sensor.new_sensor(config[CONF_BATTERY_LEVEL])
+        cg.add(var.set_battery_level(sens))

esphome/components/xiaomi_jqjcy01ym/xiaomi_jqjcy01ym.cpp

@@ -0,0 +1,66 @@
+#include "xiaomi_jqjcy01ym.h"
+#include "esphome/core/log.h"
+
+#ifdef ARDUINO_ARCH_ESP32
+
+namespace esphome {
+namespace xiaomi_jqjcy01ym {
+
+static const char *TAG = "xiaomi_jqjcy01ym";
+
+void XiaomiJQJCY01YM::dump_config() {
+  ESP_LOGCONFIG(TAG, "Xiaomi JQJCY01YM");
+  LOG_SENSOR("  ", "Temperature", this->temperature_);
+  LOG_SENSOR("  ", "Humidity", this->humidity_);
+  LOG_SENSOR("  ", "Formaldehyde", this->formaldehyde_);
+  LOG_SENSOR("  ", "Battery Level", this->battery_level_);
+}
+
+bool XiaomiJQJCY01YM::parse_device(const esp32_ble_tracker::ESPBTDevice &device) {
+  if (device.address_uint64() != this->address_) {
+    ESP_LOGVV(TAG, "parse_device(): unknown MAC address.");
+    return false;
+  }
+  ESP_LOGVV(TAG, "parse_device(): MAC address %s found.", device.address_str().c_str());
+
+  bool success = false;
+  for (auto &service_data : device.get_service_datas()) {
+    auto res = xiaomi_ble::parse_xiaomi_header(service_data);
+    if (!res.has_value()) {
+      continue;
+    }
+    if (res->is_duplicate) {
+      continue;
+    }
+    if (res->has_encryption) {
+      ESP_LOGVV(TAG, "parse_device(): payload decryption is currently not supported on this device.");
+      continue;
+    }
+    if (!(xiaomi_ble::parse_xiaomi_message(service_data.data, *res))) {
+      continue;
+    }
+    if (!(xiaomi_ble::report_xiaomi_results(res, device.address_str()))) {
+      continue;
+    }
+    if (res->temperature.has_value() && this->temperature_ != nullptr)
+      this->temperature_->publish_state(*res->temperature);
+    if (res->humidity.has_value() && this->humidity_ != nullptr)
+      this->humidity_->publish_state(*res->humidity);
+    if (res->formaldehyde.has_value() && this->formaldehyde_ != nullptr)
+      this->formaldehyde_->publish_state(*res->formaldehyde);
+    if (res->battery_level.has_value() && this->battery_level_ != nullptr)
+      this->battery_level_->publish_state(*res->battery_level);
+    success = true;
+  }
+
+  if (!success) {
+    return false;
+  }
+
+  return true;
+}
+
+}  // namespace xiaomi_jqjcy01ym
+}  // namespace esphome
+
+#endif

esphome/components/xiaomi_jqjcy01ym/xiaomi_jqjcy01ym.h

@@ -0,0 +1,37 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/components/esp32_ble_tracker/esp32_ble_tracker.h"
+#include "esphome/components/xiaomi_ble/xiaomi_ble.h"
+
+#ifdef ARDUINO_ARCH_ESP32
+
+namespace esphome {
+namespace xiaomi_jqjcy01ym {
+
+class XiaomiJQJCY01YM : public Component, public esp32_ble_tracker::ESPBTDeviceListener {
+ public:
+  void set_address(uint64_t address) { address_ = address; }
+
+  bool parse_device(const esp32_ble_tracker::ESPBTDevice &device) override;
+
+  void dump_config() override;
+  float get_setup_priority() const override { return setup_priority::DATA; }
+  void set_temperature(sensor::Sensor *temperature) { temperature_ = temperature; }
+  void set_humidity(sensor::Sensor *humidity) { humidity_ = humidity; }
+  void set_formaldehyde(sensor::Sensor *formaldehyde) { formaldehyde_ = formaldehyde; }
+  void set_battery_level(sensor::Sensor *battery_level) { battery_level_ = battery_level; }
+
+ protected:
+  uint64_t address_;
+  sensor::Sensor *temperature_{nullptr};
+  sensor::Sensor *humidity_{nullptr};
+  sensor::Sensor *formaldehyde_{nullptr};
+  sensor::Sensor *battery_level_{nullptr};
+};
+
+}  // namespace xiaomi_jqjcy01ym
+}  // namespace esphome
+
+#endif

esphome/components/xiaomi_lywsd02/xiaomi_lywsd02.cpp

@@ -14,6 +14,46 @@ void XiaomiLYWSD02::dump_config() {
   LOG_SENSOR("  ", "Humidity", this->humidity_);
 }
 
+bool XiaomiLYWSD02::parse_device(const esp32_ble_tracker::ESPBTDevice &device) {
+  if (device.address_uint64() != this->address_) {
+    ESP_LOGVV(TAG, "parse_device(): unknown MAC address.");
+    return false;
+  }
+  ESP_LOGVV(TAG, "parse_device(): MAC address %s found.", device.address_str().c_str());
+
+  bool success = false;
+  for (auto &service_data : device.get_service_datas()) {
+    auto res = xiaomi_ble::parse_xiaomi_header(service_data);
+    if (!res.has_value()) {
+      continue;
+    }
+    if (res->is_duplicate) {
+      continue;
+    }
+    if (res->has_encryption) {
+      ESP_LOGVV(TAG, "parse_device(): payload decryption is currently not supported on this device.");
+      continue;
+    }
+    if (!(xiaomi_ble::parse_xiaomi_message(service_data.data, *res))) {
+      continue;
+    }
+    if (!(xiaomi_ble::report_xiaomi_results(res, device.address_str()))) {
+      continue;
+    }
+    if (res->temperature.has_value() && this->temperature_ != nullptr)
+      this->temperature_->publish_state(*res->temperature);
+    if (res->humidity.has_value() && this->humidity_ != nullptr)
+      this->humidity_->publish_state(*res->humidity);
+    success = true;
+  }
+
+  if (!success) {
+    return false;
+  }
+
+  return true;
+}
+
 }  // namespace xiaomi_lywsd02
 }  // namespace esphome
 

esphome/components/xiaomi_lywsd02/xiaomi_lywsd02.h

@@ -14,20 +14,7 @@ class XiaomiLYWSD02 : public Component, public esp32_ble_tracker::ESPBTDeviceLis
  public:
   void set_address(uint64_t address) { address_ = address; }
 
-  bool parse_device(const esp32_ble_tracker::ESPBTDevice &device) override {
+  bool parse_device(const esp32_ble_tracker::ESPBTDevice &device) override;
-    if (device.address_uint64() != this->address_)
-      return false;
-
-    auto res = xiaomi_ble::parse_xiaomi(device);
-    if (!res.has_value())
-      return false;
-
-    if (res->temperature.has_value() && this->temperature_ != nullptr)
-      this->temperature_->publish_state(*res->temperature);
-    if (res->humidity.has_value() && this->humidity_ != nullptr)
-      this->humidity_->publish_state(*res->humidity);
-    return true;
-  }
 
   void dump_config() override;
   float get_setup_priority() const override { return setup_priority::DATA; }

esphome/components/xiaomi_lywsd03mmc/sensor.py

@@ -0,0 +1,44 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import sensor, esp32_ble_tracker
+from esphome.const import CONF_BATTERY_LEVEL, CONF_HUMIDITY, CONF_MAC_ADDRESS, CONF_TEMPERATURE, \
+    UNIT_CELSIUS, ICON_THERMOMETER, UNIT_PERCENT, ICON_WATER_PERCENT, ICON_BATTERY, CONF_ID, \
+    CONF_BINDKEY
+
+DEPENDENCIES = ['esp32_ble_tracker']
+AUTO_LOAD = ['xiaomi_ble']
+
+xiaomi_lywsd03mmc_ns = cg.esphome_ns.namespace('xiaomi_lywsd03mmc')
+XiaomiLYWSD03MMC = xiaomi_lywsd03mmc_ns.class_('XiaomiLYWSD03MMC',
+                                               esp32_ble_tracker.ESPBTDeviceListener,
+                                               cg.Component)
+
+CONFIG_SCHEMA = cv.Schema({
+    cv.GenerateID(): cv.declare_id(XiaomiLYWSD03MMC),
+    cv.Required(CONF_BINDKEY): cv.bind_key,
+    cv.Required(CONF_MAC_ADDRESS): cv.mac_address,
+    cv.Optional(CONF_TEMPERATURE): sensor.sensor_schema(UNIT_CELSIUS, ICON_THERMOMETER, 1),
+    cv.Optional(CONF_HUMIDITY): sensor.sensor_schema(UNIT_PERCENT, ICON_WATER_PERCENT, 0),
+    cv.Optional(CONF_BATTERY_LEVEL): sensor.sensor_schema(UNIT_PERCENT, ICON_BATTERY, 0),
+}).extend(esp32_ble_tracker.ESP_BLE_DEVICE_SCHEMA).extend(cv.COMPONENT_SCHEMA)
+
+
+def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    yield cg.register_component(var, config)
+    yield esp32_ble_tracker.register_ble_device(var, config)
+
+    cg.add(var.set_address(config[CONF_MAC_ADDRESS].as_hex))
+    cg.add(var.set_bindkey(config[CONF_BINDKEY]))
+
+    if CONF_TEMPERATURE in config:
+        sens = yield sensor.new_sensor(config[CONF_TEMPERATURE])
+        cg.add(var.set_temperature(sens))
+    if CONF_HUMIDITY in config:
+        sens = yield sensor.new_sensor(config[CONF_HUMIDITY])
+        cg.add(var.set_humidity(sens))
+    if CONF_BATTERY_LEVEL in config:
+        sens = yield sensor.new_sensor(config[CONF_BATTERY_LEVEL])
+        cg.add(var.set_battery_level(sens))
+
+    cg.add_library("mbedtls", "cdf462088d")

esphome/components/xiaomi_lywsd03mmc/xiaomi_lywsd03mmc.cpp

@@ -0,0 +1,81 @@
+#include "xiaomi_lywsd03mmc.h"
+#include "esphome/core/log.h"
+
+#ifdef ARDUINO_ARCH_ESP32
+
+namespace esphome {
+namespace xiaomi_lywsd03mmc {
+
+static const char *TAG = "xiaomi_lywsd03mmc";
+
+void XiaomiLYWSD03MMC::dump_config() {
+  ESP_LOGCONFIG(TAG, "Xiaomi LYWSD03MMC");
+  ESP_LOGCONFIG(TAG, "  Bindkey: %s", hexencode(this->bindkey_, 16).c_str());
+  LOG_SENSOR("  ", "Temperature", this->temperature_);
+  LOG_SENSOR("  ", "Humidity", this->humidity_);
+  LOG_SENSOR("  ", "Battery Level", this->battery_level_);
+}
+
+bool XiaomiLYWSD03MMC::parse_device(const esp32_ble_tracker::ESPBTDevice &device) {
+  if (device.address_uint64() != this->address_) {
+    ESP_LOGVV(TAG, "parse_device(): unknown MAC address.");
+    return false;
+  }
+  ESP_LOGVV(TAG, "parse_device(): MAC address %s found.", device.address_str().c_str());
+
+  bool success = false;
+  for (auto &service_data : device.get_service_datas()) {
+    auto res = xiaomi_ble::parse_xiaomi_header(service_data);
+    if (!res.has_value()) {
+      continue;
+    }
+    if (res->is_duplicate) {
+      continue;
+    }
+    if (res->has_encryption &&
+        (!(xiaomi_ble::decrypt_xiaomi_payload(const_cast<std::vector<uint8_t> &>(service_data.data), this->bindkey_,
+                                              this->address_)))) {
+      continue;
+    }
+    if (!(xiaomi_ble::parse_xiaomi_message(service_data.data, *res))) {
+      continue;
+    }
+    if (res->humidity.has_value() && this->humidity_ != nullptr) {
+      // see https://github.com/custom-components/sensor.mitemp_bt/issues/7#issuecomment-595948254
+      *res->humidity = trunc(*res->humidity);
+    }
+    if (!(xiaomi_ble::report_xiaomi_results(res, device.address_str()))) {
+      continue;
+    }
+    if (res->temperature.has_value() && this->temperature_ != nullptr)
+      this->temperature_->publish_state(*res->temperature);
+    if (res->humidity.has_value() && this->humidity_ != nullptr)
+      this->humidity_->publish_state(*res->humidity);
+    if (res->battery_level.has_value() && this->battery_level_ != nullptr)
+      this->battery_level_->publish_state(*res->battery_level);
+    success = true;
+  }
+
+  if (!success) {
+    return false;
+  }
+
+  return true;
+}
+
+void XiaomiLYWSD03MMC::set_bindkey(const std::string &bindkey) {
+  memset(bindkey_, 0, 16);
+  if (bindkey.size() != 32) {
+    return;
+  }
+  char temp[3] = {0};
+  for (int i = 0; i < 16; i++) {
+    strncpy(temp, &(bindkey.c_str()[i * 2]), 2);
+    bindkey_[i] = std::strtoul(temp, NULL, 16);
+  }
+}
+
+}  // namespace xiaomi_lywsd03mmc
+}  // namespace esphome
+
+#endif

esphome/components/xiaomi_lywsd03mmc/xiaomi_lywsd03mmc.h

@@ -0,0 +1,36 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/components/esp32_ble_tracker/esp32_ble_tracker.h"
+#include "esphome/components/xiaomi_ble/xiaomi_ble.h"
+
+#ifdef ARDUINO_ARCH_ESP32
+
+namespace esphome {
+namespace xiaomi_lywsd03mmc {
+
+class XiaomiLYWSD03MMC : public Component, public esp32_ble_tracker::ESPBTDeviceListener {
+ public:
+  void set_address(uint64_t address) { address_ = address; };
+  void set_bindkey(const std::string &bindkey);
+
+  bool parse_device(const esp32_ble_tracker::ESPBTDevice &device) override;
+  void dump_config() override;
+  float get_setup_priority() const override { return setup_priority::DATA; }
+  void set_temperature(sensor::Sensor *temperature) { temperature_ = temperature; }
+  void set_humidity(sensor::Sensor *humidity) { humidity_ = humidity; }
+  void set_battery_level(sensor::Sensor *battery_level) { battery_level_ = battery_level; }
+
+ protected:
+  uint64_t address_;
+  uint8_t bindkey_[16];
+  sensor::Sensor *temperature_{nullptr};
+  sensor::Sensor *humidity_{nullptr};
+  sensor::Sensor *battery_level_{nullptr};
+};
+
+}  // namespace xiaomi_lywsd03mmc
+}  // namespace esphome
+
+#endif

esphome/components/xiaomi_lywsdcgq/xiaomi_lywsdcgq.cpp

@@ -15,6 +15,48 @@ void XiaomiLYWSDCGQ::dump_config() {
   LOG_SENSOR("  ", "Battery Level", this->battery_level_);
 }
 
+bool XiaomiLYWSDCGQ::parse_device(const esp32_ble_tracker::ESPBTDevice &device) {
+  if (device.address_uint64() != this->address_) {
+    ESP_LOGVV(TAG, "parse_device(): unknown MAC address.");
+    return false;
+  }
+  ESP_LOGVV(TAG, "parse_device(): MAC address %s found.", device.address_str().c_str());
+
+  bool success = false;
+  for (auto &service_data : device.get_service_datas()) {
+    auto res = xiaomi_ble::parse_xiaomi_header(service_data);
+    if (!res.has_value()) {
+      continue;
+    }
+    if (res->is_duplicate) {
+      continue;
+    }
+    if (res->has_encryption) {
+      ESP_LOGVV(TAG, "parse_device(): payload decryption is currently not supported on this device.");
+      continue;
+    }
+    if (!(xiaomi_ble::parse_xiaomi_message(service_data.data, *res))) {
+      continue;
+    }
+    if (!(xiaomi_ble::report_xiaomi_results(res, device.address_str()))) {
+      continue;
+    }
+    if (res->temperature.has_value() && this->temperature_ != nullptr)
+      this->temperature_->publish_state(*res->temperature);
+    if (res->humidity.has_value() && this->humidity_ != nullptr)
+      this->humidity_->publish_state(*res->humidity);
+    if (res->battery_level.has_value() && this->battery_level_ != nullptr)
+      this->battery_level_->publish_state(*res->battery_level);
+    success = true;
+  }
+
+  if (!success) {
+    return false;
+  }
+
+  return true;
+}
+
 }  // namespace xiaomi_lywsdcgq
 }  // namespace esphome
 

esphome/components/xiaomi_lywsdcgq/xiaomi_lywsdcgq.h

@@ -14,22 +14,7 @@ class XiaomiLYWSDCGQ : public Component, public esp32_ble_tracker::ESPBTDeviceLi
  public:
   void set_address(uint64_t address) { address_ = address; }
 
-  bool parse_device(const esp32_ble_tracker::ESPBTDevice &device) override {
+  bool parse_device(const esp32_ble_tracker::ESPBTDevice &device) override;
-    if (device.address_uint64() != this->address_)
-      return false;
-
-    auto res = xiaomi_ble::parse_xiaomi(device);
-    if (!res.has_value())
-      return false;
-
-    if (res->temperature.has_value() && this->temperature_ != nullptr)
-      this->temperature_->publish_state(*res->temperature);
-    if (res->humidity.has_value() && this->humidity_ != nullptr)
-      this->humidity_->publish_state(*res->humidity);
-    if (res->battery_level.has_value() && this->battery_level_ != nullptr)
-      this->battery_level_->publish_state(*res->battery_level);
-    return true;
-  }
 
   void dump_config() override;
   float get_setup_priority() const override { return setup_priority::DATA; }

esphome/components/xiaomi_mjyd02yla/binary_sensor.py

@@ -0,0 +1,47 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import sensor, binary_sensor, esp32_ble_tracker
+from esphome.const import CONF_MAC_ADDRESS, CONF_ID, CONF_BINDKEY, \
+    CONF_DEVICE_CLASS, CONF_LIGHT, CONF_BATTERY_LEVEL, UNIT_PERCENT, ICON_BATTERY, \
+    CONF_IDLE_TIME, UNIT_MINUTE, ICON_TIMELAPSE
+
+DEPENDENCIES = ['esp32_ble_tracker']
+AUTO_LOAD = ['xiaomi_ble']
+
+xiaomi_mjyd02yla_ns = cg.esphome_ns.namespace('xiaomi_mjyd02yla')
+XiaomiMJYD02YLA = xiaomi_mjyd02yla_ns.class_('XiaomiMJYD02YLA', binary_sensor.BinarySensor,
+                                             cg.Component, esp32_ble_tracker.ESPBTDeviceListener)
+
+CONFIG_SCHEMA = cv.All(binary_sensor.BINARY_SENSOR_SCHEMA.extend({
+    cv.GenerateID(): cv.declare_id(XiaomiMJYD02YLA),
+    cv.Required(CONF_MAC_ADDRESS): cv.mac_address,
+    cv.Required(CONF_BINDKEY): cv.bind_key,
+    cv.Optional(CONF_DEVICE_CLASS, default='motion'): binary_sensor.device_class,
+    cv.Optional(CONF_IDLE_TIME): sensor.sensor_schema(UNIT_MINUTE, ICON_TIMELAPSE, 0),
+    cv.Optional(CONF_BATTERY_LEVEL): sensor.sensor_schema(UNIT_PERCENT, ICON_BATTERY, 0),
+    cv.Optional(CONF_LIGHT): binary_sensor.BINARY_SENSOR_SCHEMA.extend({
+        cv.Optional(CONF_DEVICE_CLASS, default='light'): binary_sensor.device_class,
+    }),
+}).extend(esp32_ble_tracker.ESP_BLE_DEVICE_SCHEMA).extend(cv.COMPONENT_SCHEMA))
+
+
+def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    yield cg.register_component(var, config)
+    yield esp32_ble_tracker.register_ble_device(var, config)
+    yield binary_sensor.register_binary_sensor(var, config)
+
+    cg.add(var.set_address(config[CONF_MAC_ADDRESS].as_hex))
+    cg.add(var.set_bindkey(config[CONF_BINDKEY]))
+
+    if CONF_IDLE_TIME in config:
+        sens = yield sensor.new_sensor(config[CONF_IDLE_TIME])
+        cg.add(var.set_idle_time(sens))
+    if CONF_BATTERY_LEVEL in config:
+        sens = yield sensor.new_sensor(config[CONF_BATTERY_LEVEL])
+        cg.add(var.set_battery_level(sens))
+    if CONF_LIGHT in config:
+        sens = yield binary_sensor.new_binary_sensor(config[CONF_LIGHT])
+        cg.add(var.set_light(sens))
+
+    cg.add_library("mbedtls", "cdf462088d")

esphome/components/xiaomi_mjyd02yla/xiaomi_mjyd02yla.cpp

@@ -0,0 +1,79 @@
+#include "xiaomi_mjyd02yla.h"
+#include "esphome/core/log.h"
+
+#ifdef ARDUINO_ARCH_ESP32
+
+namespace esphome {
+namespace xiaomi_mjyd02yla {
+
+static const char *TAG = "xiaomi_mjyd02yla";
+
+void XiaomiMJYD02YLA::dump_config() {
+  ESP_LOGCONFIG(TAG, "Xiaomi MJYD02YL-A");
+  LOG_BINARY_SENSOR("  ", "Motion", this);
+  LOG_BINARY_SENSOR("  ", "Light", this->is_light_);
+  LOG_SENSOR("  ", "Idle Time", this->idle_time_);
+  LOG_SENSOR("  ", "Battery Level", this->battery_level_);
+}
+
+bool XiaomiMJYD02YLA::parse_device(const esp32_ble_tracker::ESPBTDevice &device) {
+  if (device.address_uint64() != this->address_) {
+    ESP_LOGVV(TAG, "parse_device(): unknown MAC address.");
+    return false;
+  }
+  ESP_LOGVV(TAG, "parse_device(): MAC address %s found.", device.address_str().c_str());
+
+  bool success = false;
+  for (auto &service_data : device.get_service_datas()) {
+    auto res = xiaomi_ble::parse_xiaomi_header(service_data);
+    if (!res.has_value()) {
+      continue;
+    }
+    if (res->is_duplicate) {
+      continue;
+    }
+    if (res->has_encryption &&
+        (!(xiaomi_ble::decrypt_xiaomi_payload(const_cast<std::vector<uint8_t> &>(service_data.data), this->bindkey_,
+                                              this->address_)))) {
+      continue;
+    }
+    if (!(xiaomi_ble::parse_xiaomi_message(service_data.data, *res))) {
+      continue;
+    }
+    if (!(xiaomi_ble::report_xiaomi_results(res, device.address_str()))) {
+      continue;
+    }
+    if (res->idle_time.has_value() && this->idle_time_ != nullptr)
+      this->idle_time_->publish_state(*res->idle_time);
+    if (res->battery_level.has_value() && this->battery_level_ != nullptr)
+      this->battery_level_->publish_state(*res->battery_level);
+    if (res->is_light.has_value() && this->is_light_ != nullptr)
+      this->is_light_->publish_state(*res->is_light);
+    if (res->has_motion.has_value())
+      this->publish_state(*res->has_motion);
+    success = true;
+  }
+
+  if (!success) {
+    return false;
+  }
+
+  return true;
+}
+
+void XiaomiMJYD02YLA::set_bindkey(const std::string &bindkey) {
+  memset(bindkey_, 0, 16);
+  if (bindkey.size() != 32) {
+    return;
+  }
+  char temp[3] = {0};
+  for (int i = 0; i < 16; i++) {
+    strncpy(temp, &(bindkey.c_str()[i * 2]), 2);
+    bindkey_[i] = std::strtoul(temp, NULL, 16);
+  }
+}
+
+}  // namespace xiaomi_mjyd02yla
+}  // namespace esphome
+
+#endif

esphome/components/xiaomi_mjyd02yla/xiaomi_mjyd02yla.h

@@ -0,0 +1,40 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/components/binary_sensor/binary_sensor.h"
+#include "esphome/components/esp32_ble_tracker/esp32_ble_tracker.h"
+#include "esphome/components/xiaomi_ble/xiaomi_ble.h"
+
+#ifdef ARDUINO_ARCH_ESP32
+
+namespace esphome {
+namespace xiaomi_mjyd02yla {
+
+class XiaomiMJYD02YLA : public Component,
+                        public binary_sensor::BinarySensorInitiallyOff,
+                        public esp32_ble_tracker::ESPBTDeviceListener {
+ public:
+  void set_address(uint64_t address) { address_ = address; }
+  void set_bindkey(const std::string &bindkey);
+
+  bool parse_device(const esp32_ble_tracker::ESPBTDevice &device) override;
+
+  void dump_config() override;
+  float get_setup_priority() const override { return setup_priority::DATA; }
+  void set_idle_time(sensor::Sensor *idle_time) { idle_time_ = idle_time; }
+  void set_battery_level(sensor::Sensor *battery_level) { battery_level_ = battery_level; }
+  void set_light(binary_sensor::BinarySensor *light) { is_light_ = light; }
+
+ protected:
+  uint64_t address_;
+  uint8_t bindkey_[16];
+  sensor::Sensor *idle_time_{nullptr};
+  sensor::Sensor *battery_level_{nullptr};
+  binary_sensor::BinarySensor *is_light_{nullptr};
+};
+
+}  // namespace xiaomi_mjyd02yla
+}  // namespace esphome
+
+#endif

esphome/components/xiaomi_mue4094rt/binary_sensor.py

@@ -0,0 +1,29 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import binary_sensor, esp32_ble_tracker
+from esphome.const import CONF_MAC_ADDRESS, CONF_DEVICE_CLASS, CONF_TIMEOUT, CONF_ID
+
+
+DEPENDENCIES = ['esp32_ble_tracker']
+AUTO_LOAD = ['xiaomi_ble']
+
+xiaomi_mue4094rt_ns = cg.esphome_ns.namespace('xiaomi_mue4094rt')
+XiaomiMUE4094RT = xiaomi_mue4094rt_ns.class_('XiaomiMUE4094RT', binary_sensor.BinarySensor,
+                                             cg.Component, esp32_ble_tracker.ESPBTDeviceListener)
+
+CONFIG_SCHEMA = cv.All(binary_sensor.BINARY_SENSOR_SCHEMA.extend({
+    cv.GenerateID(): cv.declare_id(XiaomiMUE4094RT),
+    cv.Required(CONF_MAC_ADDRESS): cv.mac_address,
+    cv.Optional(CONF_DEVICE_CLASS, default='motion'): binary_sensor.device_class,
+    cv.Optional(CONF_TIMEOUT, default='5s'): cv.positive_time_period_milliseconds,
+}).extend(esp32_ble_tracker.ESP_BLE_DEVICE_SCHEMA).extend(cv.COMPONENT_SCHEMA))
+
+
+def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    yield cg.register_component(var, config)
+    yield esp32_ble_tracker.register_ble_device(var, config)
+    yield binary_sensor.register_binary_sensor(var, config)
+
+    cg.add(var.set_address(config[CONF_MAC_ADDRESS].as_hex))
+    cg.add(var.set_time(config[CONF_TIMEOUT]))

esphome/components/xiaomi_mue4094rt/xiaomi_mue4094rt.cpp

@@ -0,0 +1,59 @@
+#include "xiaomi_mue4094rt.h"
+#include "esphome/core/log.h"
+
+#ifdef ARDUINO_ARCH_ESP32
+
+namespace esphome {
+namespace xiaomi_mue4094rt {
+
+static const char *TAG = "xiaomi_mue4094rt";
+
+void XiaomiMUE4094RT::dump_config() {
+  ESP_LOGCONFIG(TAG, "Xiaomi MUE4094RT");
+  LOG_BINARY_SENSOR("  ", "Motion", this);
+}
+
+bool XiaomiMUE4094RT::parse_device(const esp32_ble_tracker::ESPBTDevice &device) {
+  if (device.address_uint64() != this->address_) {
+    ESP_LOGVV(TAG, "parse_device(): unknown MAC address.");
+    return false;
+  }
+  ESP_LOGVV(TAG, "parse_device(): MAC address %s found.", device.address_str().c_str());
+
+  bool success = false;
+  for (auto &service_data : device.get_service_datas()) {
+    auto res = xiaomi_ble::parse_xiaomi_header(service_data);
+    if (!res.has_value()) {
+      continue;
+    }
+    if (res->is_duplicate) {
+      continue;
+    }
+    if (res->has_encryption) {
+      ESP_LOGVV(TAG, "parse_device(): payload decryption is currently not supported on this device.");
+      continue;
+    }
+    if (!(xiaomi_ble::parse_xiaomi_message(service_data.data, *res))) {
+      continue;
+    }
+    if (!(xiaomi_ble::report_xiaomi_results(res, device.address_str()))) {
+      continue;
+    }
+    if (res->has_motion.has_value()) {
+      this->publish_state(*res->has_motion);
+      this->set_timeout("motion_timeout", timeout_, [this]() { this->publish_state(false); });
+    }
+    success = true;
+  }
+
+  if (!success) {
+    return false;
+  }
+
+  return true;
+}
+
+}  // namespace xiaomi_mue4094rt
+}  // namespace esphome
+
+#endif

esphome/components/xiaomi_mue4094rt/xiaomi_mue4094rt.h

@@ -0,0 +1,33 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/components/binary_sensor/binary_sensor.h"
+#include "esphome/components/esp32_ble_tracker/esp32_ble_tracker.h"
+#include "esphome/components/xiaomi_ble/xiaomi_ble.h"
+
+#ifdef ARDUINO_ARCH_ESP32
+
+namespace esphome {
+namespace xiaomi_mue4094rt {
+
+class XiaomiMUE4094RT : public Component,
+                        public binary_sensor::BinarySensorInitiallyOff,
+                        public esp32_ble_tracker::ESPBTDeviceListener {
+ public:
+  void set_address(uint64_t address) { address_ = address; }
+
+  bool parse_device(const esp32_ble_tracker::ESPBTDevice &device) override;
+
+  void dump_config() override;
+  float get_setup_priority() const override { return setup_priority::DATA; }
+  void set_time(uint16_t timeout) { timeout_ = timeout; }
+
+ protected:
+  uint64_t address_;
+  uint16_t timeout_;
+};
+
+}  // namespace xiaomi_mue4094rt
+}  // namespace esphome
+
+#endif

esphome/components/xiaomi_wx08zm/binary_sensor.py

@@ -0,0 +1,36 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import sensor, binary_sensor, esp32_ble_tracker
+from esphome.const import CONF_BATTERY_LEVEL, CONF_MAC_ADDRESS, CONF_TABLET, \
+    UNIT_PERCENT, ICON_BUG, ICON_BATTERY, CONF_ID
+
+
+DEPENDENCIES = ['esp32_ble_tracker']
+AUTO_LOAD = ['xiaomi_ble']
+
+xiaomi_wx08zm_ns = cg.esphome_ns.namespace('xiaomi_wx08zm')
+XiaomiWX08ZM = xiaomi_wx08zm_ns.class_('XiaomiWX08ZM', binary_sensor.BinarySensor,
+                                       esp32_ble_tracker.ESPBTDeviceListener, cg.Component)
+
+CONFIG_SCHEMA = cv.All(binary_sensor.BINARY_SENSOR_SCHEMA.extend({
+    cv.GenerateID(): cv.declare_id(XiaomiWX08ZM),
+    cv.Required(CONF_MAC_ADDRESS): cv.mac_address,
+    cv.Optional(CONF_TABLET): sensor.sensor_schema(UNIT_PERCENT, ICON_BUG, 0),
+    cv.Optional(CONF_BATTERY_LEVEL): sensor.sensor_schema(UNIT_PERCENT, ICON_BATTERY, 0),
+}).extend(esp32_ble_tracker.ESP_BLE_DEVICE_SCHEMA).extend(cv.COMPONENT_SCHEMA))
+
+
+def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    yield cg.register_component(var, config)
+    yield esp32_ble_tracker.register_ble_device(var, config)
+    yield binary_sensor.register_binary_sensor(var, config)
+
+    cg.add(var.set_address(config[CONF_MAC_ADDRESS].as_hex))
+
+    if CONF_TABLET in config:
+        sens = yield sensor.new_sensor(config[CONF_TABLET])
+        cg.add(var.set_tablet(sens))
+    if CONF_BATTERY_LEVEL in config:
+        sens = yield sensor.new_sensor(config[CONF_BATTERY_LEVEL])
+        cg.add(var.set_battery_level(sens))

esphome/components/xiaomi_wx08zm/xiaomi_wx08zm.cpp

@@ -0,0 +1,64 @@
+#include "xiaomi_wx08zm.h"
+#include "esphome/core/log.h"
+
+#ifdef ARDUINO_ARCH_ESP32
+
+namespace esphome {
+namespace xiaomi_wx08zm {
+
+static const char *TAG = "xiaomi_wx08zm";
+
+void XiaomiWX08ZM::dump_config() {
+  ESP_LOGCONFIG(TAG, "Xiaomi WX08ZM");
+  LOG_BINARY_SENSOR("  ", "Mosquito Repellent", this);
+  LOG_SENSOR("  ", "Tablet Resource", this->tablet_);
+  LOG_SENSOR("  ", "Battery Level", this->battery_level_);
+}
+
+bool XiaomiWX08ZM::parse_device(const esp32_ble_tracker::ESPBTDevice &device) {
+  if (device.address_uint64() != this->address_) {
+    ESP_LOGVV(TAG, "parse_device(): unknown MAC address.");
+    return false;
+  }
+  ESP_LOGVV(TAG, "parse_device(): MAC address %s found.", device.address_str().c_str());
+
+  bool success = false;
+  for (auto &service_data : device.get_service_datas()) {
+    auto res = xiaomi_ble::parse_xiaomi_header(service_data);
+    if (!res.has_value()) {
+      continue;
+    }
+    if (res->is_duplicate) {
+      continue;
+    }
+    if (res->has_encryption) {
+      ESP_LOGVV(TAG, "parse_device(): payload decryption is currently not supported on this device.");
+      continue;
+    }
+    if (!(xiaomi_ble::parse_xiaomi_message(service_data.data, *res))) {
+      continue;
+    }
+    if (!(xiaomi_ble::report_xiaomi_results(res, device.address_str()))) {
+      continue;
+    }
+    if (res->is_active.has_value()) {
+      this->publish_state(*res->is_active);
+    }
+    if (res->tablet.has_value() && this->tablet_ != nullptr)
+      this->tablet_->publish_state(*res->tablet);
+    if (res->battery_level.has_value() && this->battery_level_ != nullptr)
+      this->battery_level_->publish_state(*res->battery_level);
+    success = true;
+  }
+
+  if (!success) {
+    return false;
+  }
+
+  return true;
+}
+
+}  // namespace xiaomi_wx08zm
+}  // namespace esphome
+
+#endif

esphome/components/xiaomi_wx08zm/xiaomi_wx08zm.h

@@ -0,0 +1,36 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/components/binary_sensor/binary_sensor.h"
+#include "esphome/components/esp32_ble_tracker/esp32_ble_tracker.h"
+#include "esphome/components/xiaomi_ble/xiaomi_ble.h"
+
+#ifdef ARDUINO_ARCH_ESP32
+
+namespace esphome {
+namespace xiaomi_wx08zm {
+
+class XiaomiWX08ZM : public Component,
+                     public binary_sensor::BinarySensorInitiallyOff,
+                     public esp32_ble_tracker::ESPBTDeviceListener {
+ public:
+  void set_address(uint64_t address) { address_ = address; }
+
+  bool parse_device(const esp32_ble_tracker::ESPBTDevice &device) override;
+
+  void dump_config() override;
+  float get_setup_priority() const override { return setup_priority::DATA; }
+  void set_tablet(sensor::Sensor *tablet) { tablet_ = tablet; }
+  void set_battery_level(sensor::Sensor *battery_level) { battery_level_ = battery_level; }
+
+ protected:
+  uint64_t address_;
+  sensor::Sensor *tablet_{nullptr};
+  sensor::Sensor *battery_level_{nullptr};
+};
+
+}  // namespace xiaomi_wx08zm
+}  // namespace esphome
+
+#endif

esphome/config_validation.py

@@ -566,6 +566,23 @@ def mac_address(value):
     return core.MACAddress(*parts_int)
 
 
+def bind_key(value):
+    value = string_strict(value)
+    parts = [value[i:i+2] for i in range(0, len(value), 2)]
+    if len(parts) != 16:
+        raise Invalid("Bind key must consist of 16 hexadecimal numbers")
+    parts_int = []
+    if any(len(part) != 2 for part in parts):
+        raise Invalid("Bind key must be format XX")
+    for part in parts:
+        try:
+            parts_int.append(int(part, 16))
+        except ValueError:
+            raise Invalid("Bind key must be hex values from 00 to FF")
+
+    return ''.join(f'{part:02X}' for part in parts_int)
+
+
 def uuid(value):
     return Coerce(uuid_.UUID)(value)
 

esphome/const.py

@@ -55,6 +55,7 @@ CONF_BELOW = 'below'
 CONF_BINARY = 'binary'
 CONF_BINARY_SENSOR = 'binary_sensor'
 CONF_BINARY_SENSORS = 'binary_sensors'
+CONF_BINDKEY = 'bindkey'
 CONF_BIRTH_MESSAGE = 'birth_message'
 CONF_BIT_DEPTH = 'bit_depth'
 CONF_BLUE = 'blue'
@@ -194,6 +195,7 @@ CONF_ID = 'id'
 CONF_IDLE = 'idle'
 CONF_IDLE_ACTION = 'idle_action'
 CONF_IDLE_LEVEL = 'idle_level'
+CONF_IDLE_TIME = 'idle_time'
 CONF_IF = 'if'
 CONF_IIR_FILTER = 'iir_filter'
 CONF_ILLUMINANCE = 'illuminance'
@@ -265,6 +267,7 @@ CONF_MODEL = 'model'
 CONF_MOISTURE = 'moisture'
 CONF_MONTHS = 'months'
 CONF_MOSI_PIN = 'mosi_pin'
+CONF_MOTION = 'motion'
 CONF_MOVEMENT_COUNTER = 'movement_counter'
 CONF_MQTT = 'mqtt'
 CONF_MQTT_ID = 'mqtt_id'
@@ -445,6 +448,7 @@ CONF_SUPPORTS_HEAT = 'supports_heat'
 CONF_SWING_MODE = 'swing_mode'
 CONF_SWITCHES = 'switches'
 CONF_SYNC = 'sync'
+CONF_TABLET = 'tablet'
 CONF_TAG = 'tag'
 CONF_TARGET = 'target'
 CONF_TARGET_TEMPERATURE = 'target_temperature'
@@ -520,17 +524,20 @@ ICON_ARROW_EXPAND_VERTICAL = 'mdi:arrow-expand-vertical'
 ICON_BATTERY = 'mdi:battery'
 ICON_BRIEFCASE_DOWNLOAD = 'mdi:briefcase-download'
 ICON_BRIGHTNESS_5 = 'mdi:brightness-5'
+ICON_BUG = 'mdi:bug'
 ICON_CHECK_CIRCLE_OUTLINE = 'mdi:check-circle-outline'
 ICON_CHEMICAL_WEAPON = 'mdi:chemical-weapon'
 ICON_COUNTER = 'mdi:counter'
 ICON_CURRENT_AC = 'mdi:current-ac'
 ICON_EMPTY = ''
 ICON_FLASH = 'mdi:flash'
+ICON_FLASK_OUTLINE = 'mdi:flask-outline'
 ICON_FLOWER = 'mdi:flower'
 ICON_GAS_CYLINDER = 'mdi:gas-cylinder'
 ICON_GAUGE = 'mdi:gauge'
 ICON_LIGHTBULB = 'mdi:lightbulb'
 ICON_MAGNET = 'mdi:magnet'
+ICON_MOTION_SENSOR = 'mdi:motion-sensor'
 ICON_NEW_BOX = 'mdi:new-box'
 ICON_PERCENT = 'mdi:percent'
 ICON_PERIODIC_TABLE_CO2 = 'mdi:periodic-table-co2'
@@ -546,6 +553,7 @@ ICON_SIGN_DIRECTION = 'mdi:sign-direction'
 ICON_SIGNAL = 'mdi:signal-distance-variant'
 ICON_SIGNAL_DISTANCE_VARIANT = 'mdi:signal'
 ICON_THERMOMETER = 'mdi:thermometer'
+ICON_TIMELAPSE = 'mdi:timelapse'
 ICON_TIMER = 'mdi:timer'
 ICON_WATER_PERCENT = 'mdi:water-percent'
 ICON_WEATHER_SUNSET = 'mdi:weather-sunset'
@@ -575,6 +583,8 @@ UNIT_MICROGRAMS_PER_CUBIC_METER = 'µg/m³'
 UNIT_MICROMETER = 'µm'
 UNIT_MICROSIEMENS_PER_CENTIMETER = 'µS/cm'
 UNIT_MICROTESLA = 'µT'
+UNIT_MILLIGRAMS_PER_CUBIC_METER = 'mg/m³'
+UNIT_MINUTE = 'min'
 UNIT_OHM = 'Ω'
 UNIT_PARTS_PER_BILLION = 'ppb'
 UNIT_PARTS_PER_MILLION = 'ppm'

tests/test2.yaml

@@ -44,16 +44,14 @@ ota:
 logger:
   level: DEBUG
 
-web_server:
-  auth:
-    username: admin
-    password: admin
-
 as3935_i2c:
   irq_pin: GPIO12
 
 
 sensor:
+  - platform: homeassistant
+    entity_id: sensor.hello_world
+    id: ha_hello_world
   - platform: ble_rssi
     mac_address: AC:37:43:77:5F:4C
     name: "BLE Google Home Mini RSSI value"
@@ -66,40 +64,6 @@ sensor:
   - platform: ble_rssi
     service_uuid: '11223344-5566-7788-99aa-bbccddeeff00'
     name: "BLE Test Service 128"
-  - platform: xiaomi_hhccjcy01
-    mac_address: 94:2B:FF:5C:91:61
-    temperature:
-      name: "Xiaomi HHCCJCY01 Temperature"
-    moisture:
-      name: "Xiaomi HHCCJCY01 Moisture"
-    illuminance:
-      name: "Xiaomi HHCCJCY01 Illuminance"
-    conductivity:
-      name: "Xiaomi HHCCJCY01 Soil Conductivity"
-    battery_level:
-      name: "Xiaomi HHCCJCY01 Battery Level"
-  - platform: xiaomi_lywsdcgq
-    mac_address: 7A:80:8E:19:36:BA
-    temperature:
-      name: "Xiaomi LYWSDCGQ Temperature"
-    humidity:
-      name: "Xiaomi LYWSDCGQ Humidity"
-    battery_level:
-      name: "Xiaomi LYWSDCGQ Battery Level"
-  - platform: xiaomi_lywsd02
-    mac_address: 3F:5B:7D:82:58:4E
-    temperature:
-      name: "Xiaomi LYWSD02 Temperature"
-    humidity:
-      name: "Xiaomi LYWSD02 Humidity"
-  - platform: xiaomi_cgg1
-    mac_address: 7A:80:8E:19:36:BA
-    temperature:
-      name: "Xiaomi CGG1 Temperature"
-    humidity:
-      name: "Xiaomi CGG1 Humidity"
-    battery_level:
-      name: "Xiaomi CGG1 Battery Level"
   - platform: ruuvitag
     mac_address: FF:56:D3:2F:7D:E8
     humidity:
@@ -122,14 +86,88 @@ sensor:
       name: "RuuviTag Movement Counter"
     measurement_sequence_number:
       name: "RuuviTag Measurement Sequence Number"
-  - platform: homeassistant
-    entity_id: sensor.hello_world
-    id: ha_hello_world
   - platform: as3935
     lightning_energy:
       name: "Lightning Energy"
     distance:
       name: "Distance Storm"
+  - platform: xiaomi_hhccjcy01
+    mac_address: 94:2B:FF:5C:91:61
+    temperature:
+      name: "Xiaomi HHCCJCY01 Temperature"
+    moisture:
+      name: "Xiaomi HHCCJCY01 Moisture"
+    illuminance:
+      name: "Xiaomi HHCCJCY01 Illuminance"
+    conductivity:
+      name: "Xiaomi HHCCJCY01 Soil Conductivity"
+  - platform: xiaomi_lywsdcgq
+    mac_address: 7A:80:8E:19:36:BA
+    temperature:
+      name: "Xiaomi LYWSDCGQ Temperature"
+    humidity:
+      name: "Xiaomi LYWSDCGQ Humidity"
+    battery_level:
+      name: "Xiaomi LYWSDCGQ Battery Level"
+  - platform: xiaomi_lywsd02
+    mac_address: 3F:5B:7D:82:58:4E
+    temperature:
+      name: "Xiaomi LYWSD02 Temperature"
+    humidity:
+      name: "Xiaomi LYWSD02 Humidity"
+  - platform: xiaomi_cgg1
+    mac_address: 7A:80:8E:19:36:BA
+    temperature:
+      name: "Xiaomi CGG1 Temperature"
+    humidity:
+      name: "Xiaomi CGG1 Humidity"
+    battery_level:
+      name: "Xiaomi CGG1 Battery Level"
+  - platform: xiaomi_gcls002
+    mac_address: "94:2B:FF:5C:91:61"
+    temperature:
+      name: "GCLS02 Temperature"
+    moisture:
+      name: "GCLS02 Moisture"
+    conductivity:
+      name: "GCLS02 Soil Conductivity"
+    illuminance:
+      name: "GCLS02 Illuminance"
+  - platform: xiaomi_hhccpot002
+    mac_address: "94:2B:FF:5C:91:61"
+    moisture:
+      name: "HHCCPOT002 Moisture"
+    conductivity:
+      name: "HHCCPOT002 Soil Conductivity"
+  - platform: xiaomi_lywsd03mmc
+    mac_address: "A4:C1:38:4E:16:78"
+    bindkey: "e9efaa6873f9f9c87a5e75a5f814801c"
+    temperature:
+      name: "Xiaomi LYWSD03MMC Temperature"
+    humidity:
+      name: "Xiaomi LYWSD03MMC Humidity"
+    battery_level:
+      name: "Xiaomi LYWSD03MMC Battery Level"
+  - platform: xiaomi_cgd1
+    mac_address: "A4:C1:38:D1:61:7D"
+    bindkey: "c99d2313182473b38001086febf781bd"
+    temperature:
+      name: "Xiaomi CGD1 Temperature"
+    humidity:
+      name: "Xiaomi CGD1 Humidity"
+    battery_level:
+      name: "Xiaomi CGD1 Battery Level"
+  - platform: xiaomi_jqjcy01ym
+    mac_address: "7A:80:8E:19:36:BA"
+    temperature:
+      name: "JQJCY01YM Temperature"
+    humidity:
+      name: "JQJCY01YM Humidity"
+    formaldehyde:
+      name: "JQJCY01YM Formaldehyde"
+    battery_level:
+      name: "JQJCY01YM Battery Level"
+
 
 time:
 - platform: homeassistant
@@ -142,6 +180,9 @@ esp32_touch:
   setup_mode: True
 
 binary_sensor:
+  - platform: homeassistant
+    entity_id: binary_sensor.hello_world
+    id: ha_hello_world_binary
   - platform: ble_presence
     mac_address: AC:37:43:77:5F:4C
     name: "ESP32 BLE Tracker Google Home Mini"
@@ -158,11 +199,30 @@ binary_sensor:
     name: "ESP32 Touch Pad GPIO27"
     pin: GPIO27
     threshold: 1000
-  - platform: homeassistant
-    entity_id: binary_sensor.hello_world
-    id: ha_hello_world_binary
   - platform: as3935
     name: "Storm Alert"
+  - platform: xiaomi_mue4094rt
+    name: "MUE4094RT Motion"
+    mac_address: "7A:80:8E:19:36:BA"
+    timeout: "5s"
+  - platform: xiaomi_mjyd02yla
+    name: "MJYD02YL-A Motion"
+    mac_address: "50:EC:50:CD:32:02"
+    bindkey: "48403ebe2d385db8d0c187f81e62cb64"
+    idle_time:
+      name: "MJYD02YL-A Idle Time"
+    light:
+      name: "MJYD02YL-A Light Status"
+    battery_level:
+      name: "MJYD02YL-A Battery Level"
+  - platform: xiaomi_wx08zm
+    name: "WX08ZM Activation State"
+    mac_address: "74:a3:4a:b5:07:34"
+    tablet:
+      name: "WX08ZM Tablet Resource"
+    battery_level:
+      name: "WX08ZM Battery Level"
+
 
 esp32_ble_tracker:
   on_ble_advertise:
@@ -257,3 +317,4 @@ interval:
 
 display:
 
+

tests/test4.yaml

@@ -0,0 +1,73 @@
+esphome:
+  name: $devicename
+  platform: ESP32
+  board: nodemcu-32s
+  build_path: build/test4
+
+substitutions:
+  devicename: test4
+
+ethernet:
+  type: LAN8720
+  mdc_pin: GPIO23
+  mdio_pin: GPIO25
+  clk_mode: GPIO0_IN
+  phy_addr: 0
+  power_pin: GPIO25
+  manual_ip:
+    static_ip: 192.168.178.56
+    gateway: 192.168.178.1
+    subnet: 255.255.255.0
+  domain: .local
+
+api:
+
+i2c:
+  sda: 21
+  scl: 22
+  scan: False
+
+spi:
+  clk_pin: GPIO21
+  mosi_pin: GPIO22
+  miso_pin: GPIO23
+
+uart:
+  tx_pin: GPIO22
+  rx_pin: GPIO23
+  baud_rate: 115200
+
+ota:
+  safe_mode: True
+  port: 3286
+
+logger:
+  level: DEBUG
+
+web_server:
+  auth:
+    username: admin
+    password: admin
+
+sensor:
+  - platform: homeassistant
+    entity_id: sensor.hello_world
+    id: ha_hello_world
+#
+# platform sensor.apds9960 requires component apds9960
+#
+#  - platform: apds9960
+#    type: proximity
+#    name: APDS9960 Proximity
+#  - platform: apds9960
+#    type: clear
+#    name: APDS9960 Clear
+#  - platform: apds9960
+#    type: red
+#    name: APDS9960 Red
+#  - platform: apds9960
+#    type: green
+#    name: APDS9960 Green
+#  - platform: apds9960
+#    type: blue
+#    name: APDS9960 Blue