Merge branch 'dev' into update/i2s-audio

.github/PULL_REQUEST_TEMPLATE.md

@@ -7,11 +7,16 @@
 - [ ] Bugfix (non-breaking change which fixes an issue)
 - [ ] New feature (non-breaking change which adds functionality)
 - [ ] Breaking change (fix or feature that would cause existing functionality to not work as expected)
+- [ ] Code quality improvements to existing code or addition of tests
 - [ ] Other
 
-**Related issue or feature (if applicable):** fixes <link to issue>
+**Related issue or feature (if applicable):**
 
-**Pull request in [esphome-docs](https://github.com/esphome/esphome-docs) with documentation (if applicable):** esphome/esphome-docs#<esphome-docs PR number goes here>
+- fixes <link to issue>
+
+**Pull request in [esphome-docs](https://github.com/esphome/esphome-docs) with documentation (if applicable):**
+
+- esphome/esphome-docs#<esphome-docs PR number goes here>
 
 ## Test Environment
 
@@ -23,12 +28,6 @@
 - [ ] RTL87xx
 
 ## Example entry for `config.yaml`:
-<!--
-  Supplying a configuration snippet, makes it easier for a maintainer to test
-  your PR. Furthermore, for new integrations, it gives an impression of how
-  the configuration would look like.
-  Note: Remove this section if this PR does not have an example entry.
--->
 
 ```yaml
 # Example config.yaml

.github/actions/build-image/action.yaml

@@ -46,7 +46,7 @@ runs:
 
     - name: Build and push to ghcr by digest
       id: build-ghcr
-      uses: docker/build-push-action@v6.7.0
+      uses: docker/build-push-action@v6.9.0
       env:
         DOCKER_BUILD_SUMMARY: false
         DOCKER_BUILD_RECORD_UPLOAD: false
@@ -72,7 +72,7 @@ runs:
 
     - name: Build and push to dockerhub by digest
       id: build-dockerhub
-      uses: docker/build-push-action@v6.7.0
+      uses: docker/build-push-action@v6.9.0
       env:
         DOCKER_BUILD_SUMMARY: false
         DOCKER_BUILD_RECORD_UPLOAD: false

.github/actions/restore-python/action.yml

@@ -22,7 +22,7 @@ runs:
         python-version: ${{ inputs.python-version }}
     - name: Restore Python virtual environment
       id: cache-venv
-      uses: actions/cache/restore@v4.0.2
+      uses: actions/cache/restore@v4.1.1
       with:
         path: venv
         # yamllint disable-line rule:line-length

.github/workflows/ci-docker.yml

@@ -46,7 +46,7 @@ jobs:
         with:
           python-version: "3.9"
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3.6.1
+        uses: docker/setup-buildx-action@v3.7.1
       - name: Set up QEMU
         uses: docker/setup-qemu-action@v3.2.0
 

.github/workflows/ci.yml

@@ -46,7 +46,7 @@ jobs:
           python-version: ${{ env.DEFAULT_PYTHON }}
       - name: Restore Python virtual environment
         id: cache-venv
-        uses: actions/cache@v4.0.2
+        uses: actions/cache@v4.1.1
         with:
           path: venv
           # yamllint disable-line rule:line-length
@@ -302,20 +302,22 @@ jobs:
 
       - name: Cache platformio
         if: github.ref == 'refs/heads/dev'
-        uses: actions/cache@v4.0.2
+        uses: actions/cache@v4.1.1
         with:
           path: ~/.platformio
           key: platformio-${{ matrix.pio_cache_key }}
 
       - name: Cache platformio
         if: github.ref != 'refs/heads/dev'
-        uses: actions/cache/restore@v4.0.2
+        uses: actions/cache/restore@v4.1.1
         with:
           path: ~/.platformio
           key: platformio-${{ matrix.pio_cache_key }}
 
       - name: Install clang-tidy
-        run: sudo apt-get install clang-tidy-14
+        run: |
+          sudo apt-get update
+          sudo apt-get install clang-tidy-14
 
       - name: Register problem matchers
         run: |
@@ -397,7 +399,9 @@ jobs:
         file: ${{ fromJson(needs.list-components.outputs.components) }}
     steps:
       - name: Install dependencies
-        run: sudo apt-get install libsdl2-dev
+        run: |
+          sudo apt-get update
+          sudo apt-get install libsdl2-dev
 
       - name: Check out code from GitHub
         uses: actions/checkout@v4.1.7
@@ -451,7 +455,9 @@ jobs:
         run: echo ${{ matrix.components }}
 
       - name: Install dependencies
-        run: sudo apt-get install libsdl2-dev
+        run: |
+          sudo apt-get update
+          sudo apt-get install libsdl2-dev
 
       - name: Check out code from GitHub
         uses: actions/checkout@v4.1.7

.github/workflows/codeql.yml

@@ -0,0 +1,91 @@
+# For most projects, this workflow file will not need changing; you simply need
+# to commit it to your repository.
+#
+# You may wish to alter this file to override the set of languages analyzed,
+# or to provide custom queries or build logic.
+#
+# ******** NOTE ********
+# We have attempted to detect the languages in your repository. Please check
+# the `language` matrix defined below to confirm you have the correct set of
+# supported CodeQL languages.
+#
+name: "CodeQL Advanced"
+
+on:
+  workflow_dispatch:
+  schedule:
+    - cron: "30 18 * * 4"
+
+jobs:
+  analyze:
+    name: Analyze (${{ matrix.language }})
+    # Runner size impacts CodeQL analysis time. To learn more, please see:
+    #   - https://gh.io/recommended-hardware-resources-for-running-codeql
+    #   - https://gh.io/supported-runners-and-hardware-resources
+    #   - https://gh.io/using-larger-runners (GitHub.com only)
+    # Consider using larger runners or machines with greater resources for possible analysis time improvements.
+    runs-on: ${{ (matrix.language == 'swift' && 'macos-latest') || 'ubuntu-latest' }}
+    permissions:
+      # required for all workflows
+      security-events: write
+
+      # required to fetch internal or private CodeQL packs
+      packages: read
+
+      # only required for workflows in private repositories
+      actions: read
+      contents: read
+
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          # - language: c-cpp
+          #   build-mode: autobuild
+          - language: python
+            build-mode: none
+            # CodeQL supports the following values keywords for 'language': 'c-cpp', 'csharp', 'go', 'java-kotlin', 'javascript-typescript', 'python', 'ruby', 'swift'
+            # Use `c-cpp` to analyze code written in C, C++ or both
+            # Use 'java-kotlin' to analyze code written in Java, Kotlin or both
+            # Use 'javascript-typescript' to analyze code written in JavaScript, TypeScript or both
+            # To learn more about changing the languages that are analyzed or customizing the build mode for your analysis,
+            # see https://docs.github.com/en/code-security/code-scanning/creating-an-advanced-setup-for-code-scanning/customizing-your-advanced-setup-for-code-scanning.
+            # If you are analyzing a compiled language, you can modify the 'build-mode' for that language to customize how
+            # your codebase is analyzed, see https://docs.github.com/en/code-security/code-scanning/creating-an-advanced-setup-for-code-scanning/codeql-code-scanning-for-compiled-languages
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@v4
+
+      # Initializes the CodeQL tools for scanning.
+      - name: Initialize CodeQL
+        uses: github/codeql-action/init@v3
+        with:
+          languages: ${{ matrix.language }}
+          build-mode: ${{ matrix.build-mode }}
+          # If you wish to specify custom queries, you can do so here or in a config file.
+          # By default, queries listed here will override any specified in a config file.
+          # Prefix the list here with "+" to use these queries and those in the config file.
+
+          # For more details on CodeQL's query packs, refer to: https://docs.github.com/en/code-security/code-scanning/automatically-scanning-your-code-for-vulnerabilities-and-errors/configuring-code-scanning#using-queries-in-ql-packs
+          # queries: security-extended,security-and-quality
+
+      # If the analyze step fails for one of the languages you are analyzing with
+      # "We were unable to automatically build your code", modify the matrix above
+      # to set the build mode to "manual" for that language. Then modify this step
+      # to build your code.
+      # ℹ️ Command-line programs to run using the OS shell.
+      # 📚 See https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions#jobsjob_idstepsrun
+      - if: matrix.build-mode == 'manual'
+        shell: bash
+        run: |
+          echo 'If you are using a "manual" build mode for one or more of the' \
+            'languages you are analyzing, replace this with the commands to build' \
+            'your code, for example:'
+          echo '  make bootstrap'
+          echo '  make release'
+          exit 1
+
+      - name: Perform CodeQL Analysis
+        uses: github/codeql-action/analyze@v3
+        with:
+          category: "/language:${{matrix.language}}"

.github/workflows/release.yml

@@ -65,7 +65,7 @@ jobs:
           pip3 install build
           python3 -m build
       - name: Publish
-        uses: pypa/gh-action-pypi-publish@v1.10.1
+        uses: pypa/gh-action-pypi-publish@v1.10.3
 
   deploy-docker:
     name: Build ESPHome ${{ matrix.platform }}
@@ -90,7 +90,7 @@ jobs:
           python-version: "3.9"
 
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3.6.1
+        uses: docker/setup-buildx-action@v3.7.1
       - name: Set up QEMU
         if: matrix.platform != 'linux/amd64'
         uses: docker/setup-qemu-action@v3.2.0
@@ -141,7 +141,7 @@ jobs:
           echo name=$(cat /tmp/platform) >> $GITHUB_OUTPUT
 
       - name: Upload digests
-        uses: actions/upload-artifact@v4.4.0
+        uses: actions/upload-artifact@v4.4.3
         with:
           name: digests-${{ steps.sanitize.outputs.name }}
           path: /tmp/digests
@@ -184,7 +184,7 @@ jobs:
           merge-multiple: true
 
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3.6.1
+        uses: docker/setup-buildx-action@v3.7.1
 
       - name: Log in to docker hub
         if: matrix.registry == 'dockerhub'

.github/workflows/sync-device-classes.yml

@@ -36,7 +36,7 @@ jobs:
           python ./script/sync-device_class.py
 
       - name: Commit changes
-        uses: peter-evans/create-pull-request@v7.0.0
+        uses: peter-evans/create-pull-request@v7.0.5
         with:
           commit-message: "Synchronise Device Classes from Home Assistant"
           committer: esphomebot <esphome@nabucasa.com>

CODEOWNERS

@@ -24,6 +24,7 @@ esphome/components/ade7953_i2c/* @angelnu
 esphome/components/ade7953_spi/* @angelnu
 esphome/components/ads1118/* @solomondg1
 esphome/components/ags10/* @mak-42
+esphome/components/aic3204/* @kbx81
 esphome/components/airthings_ble/* @jeromelaban
 esphome/components/airthings_wave_base/* @jeromelaban @kpfleming @ncareau
 esphome/components/airthings_wave_mini/* @ncareau
@@ -47,6 +48,9 @@ esphome/components/at581x/* @X-Ryl669
 esphome/components/atc_mithermometer/* @ahpohl
 esphome/components/atm90e26/* @danieltwagner
 esphome/components/atm90e32/* @circuitsetup @descipher
+esphome/components/audio/* @kahrendt
+esphome/components/audio_dac/* @kbx81
+esphome/components/axs15231/* @clydebarrow
 esphome/components/b_parasite/* @rbaron
 esphome/components/ballu/* @bazuchan
 esphome/components/bang_bang/* @OttoWinter
@@ -86,7 +90,7 @@ esphome/components/cap1188/* @mreditor97
 esphome/components/captive_portal/* @OttoWinter
 esphome/components/ccs811/* @habbie
 esphome/components/cd74hc4067/* @asoehlke
-esphome/components/ch422g/* @jesterret
+esphome/components/ch422g/* @clydebarrow @jesterret
 esphome/components/climate/* @esphome/core
 esphome/components/climate_ir/* @glmnet
 esphome/components/color_temperature/* @jesserockz
@@ -152,6 +156,7 @@ esphome/components/ft63x6/* @gpambrozio
 esphome/components/gcja5/* @gcormier
 esphome/components/gdk101/* @Szewcson
 esphome/components/globals/* @esphome/core
+esphome/components/gp2y1010au0f/* @zry98
 esphome/components/gp8403/* @jesserockz
 esphome/components/gpio/* @esphome/core
 esphome/components/gpio/one_wire/* @ssieb
@@ -159,6 +164,7 @@ esphome/components/gps/* @coogle
 esphome/components/graph/* @synco
 esphome/components/graphical_display_menu/* @MrMDavidson
 esphome/components/gree/* @orestismers
+esphome/components/grove_gas_mc_v2/* @YorkshireIoT
 esphome/components/grove_tb6612fng/* @max246
 esphome/components/growatt_solar/* @leeuwte
 esphome/components/gt911/* @clydebarrow @jesserockz
@@ -166,6 +172,7 @@ esphome/components/haier/* @paveldn
 esphome/components/haier/binary_sensor/* @paveldn
 esphome/components/haier/button/* @paveldn
 esphome/components/haier/sensor/* @paveldn
+esphome/components/haier/switch/* @paveldn
 esphome/components/haier/text_sensor/* @paveldn
 esphome/components/havells_solar/* @sourabhjaiswal
 esphome/components/hbridge/fan/* @WeekendWarrior
@@ -232,6 +239,7 @@ esphome/components/ltr_als_ps/* @latonita
 esphome/components/lvgl/* @clydebarrow
 esphome/components/m5stack_8angle/* @rnauber
 esphome/components/matrix_keypad/* @ssieb
+esphome/components/max17043/* @blacknell
 esphome/components/max31865/* @DAVe3283
 esphome/components/max44009/* @berfenger
 esphome/components/max6956/* @looping40
@@ -278,6 +286,7 @@ esphome/components/mopeka_std_check/* @Fabian-Schmidt
 esphome/components/mpl3115a2/* @kbickar
 esphome/components/mpu6886/* @fabaff
 esphome/components/ms8607/* @e28eta
+esphome/components/nau7802/* @cujomalainey
 esphome/components/network/* @esphome/core
 esphome/components/nextion/* @edwardtfn @senexcrenshaw
 esphome/components/nextion/binary_sensor/* @senexcrenshaw
@@ -286,9 +295,11 @@ esphome/components/nextion/switch/* @senexcrenshaw
 esphome/components/nextion/text_sensor/* @senexcrenshaw
 esphome/components/nfc/* @jesserockz @kbx81
 esphome/components/noblex/* @AGalfra
+esphome/components/npi19/* @bakerkj
 esphome/components/number/* @esphome/core
 esphome/components/one_wire/* @ssieb
 esphome/components/online_image/* @guillempages
+esphome/components/opentherm/* @olegtarasov
 esphome/components/ota/* @esphome/core
 esphome/components/output/* @esphome/core
 esphome/components/pca6416a/* @Mat931
@@ -316,7 +327,7 @@ esphome/components/pvvx_mithermometer/* @pasiz
 esphome/components/pylontech/* @functionpointer
 esphome/components/qmp6988/* @andrewpc
 esphome/components/qr_code/* @wjtje
-esphome/components/qspi_amoled/* @clydebarrow
+esphome/components/qspi_dbi/* @clydebarrow
 esphome/components/qwiic_pir/* @kahrendt
 esphome/components/radon_eye_ble/* @jeffeb3
 esphome/components/radon_eye_rd200/* @jeffeb3
@@ -395,10 +406,13 @@ esphome/components/sun/* @OttoWinter
 esphome/components/sun_gtil2/* @Mat931
 esphome/components/switch/* @esphome/core
 esphome/components/t6615/* @tylermenezes
+esphome/components/tc74/* @sethgirvan
 esphome/components/tca9548a/* @andreashergert1984
+esphome/components/tca9555/* @mobrembski
 esphome/components/tcl112/* @glmnet
 esphome/components/tee501/* @Stock-M
 esphome/components/teleinfo/* @0hax
+esphome/components/tem3200/* @bakerkj
 esphome/components/template/alarm_control_panel/* @grahambrown11 @hwstar
 esphome/components/template/datetime/* @rfdarter
 esphome/components/template/event/* @nohat

README.md

@@ -7,3 +7,5 @@
 For issues, please go to [the issue tracker](https://github.com/esphome/issues/issues).
 
 For feature requests, please see [feature requests](https://github.com/esphome/feature-requests/issues).
+
+[![ESPHome - A project from the Open Home Foundation](https://www.openhomefoundation.org/badges/esphome.png)](https://www.openhomefoundation.org/)

docker/Dockerfile

@@ -33,7 +33,7 @@ RUN \
         python3-venv=3.11.2-1+b1 \
         python3-wheel=0.38.4-2 \
         iputils-ping=3:20221126-1 \
-        git=1:2.39.2-1.1 \
+        git=1:2.39.5-0+deb12u1 \
         curl=7.88.1-10+deb12u7 \
         openssh-client=1:9.2p1-2+deb12u3 \
         python3-cffi=1.15.1-5 \
@@ -86,7 +86,7 @@ RUN \
     pip3 install \
     --break-system-packages --no-cache-dir \
     # Keep platformio version in sync with requirements.txt
-    platformio==6.1.15 \
+    platformio==6.1.16 \
     # Change some platformio settings
     && platformio settings set enable_telemetry No \
     && platformio settings set check_platformio_interval 1000000 \

esphome/automation.py

@@ -1,6 +1,8 @@
 import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome.const import (
+    CONF_ALL,
+    CONF_ANY,
     CONF_AUTOMATION_ID,
     CONF_CONDITION,
     CONF_COUNT,
@@ -73,6 +75,13 @@ def validate_potentially_and_condition(value):
     return validate_condition(value)
 
 
+def validate_potentially_or_condition(value):
+    if isinstance(value, list):
+        with cv.remove_prepend_path(["or"]):
+            return validate_condition({"or": value})
+    return validate_condition(value)
+
+
 DelayAction = cg.esphome_ns.class_("DelayAction", Action, cg.Component)
 LambdaAction = cg.esphome_ns.class_("LambdaAction", Action)
 IfAction = cg.esphome_ns.class_("IfAction", Action)
@@ -166,6 +175,18 @@ async def or_condition_to_code(config, condition_id, template_arg, args):
     return cg.new_Pvariable(condition_id, template_arg, conditions)
 
 
+@register_condition("all", AndCondition, validate_condition_list)
+async def all_condition_to_code(config, condition_id, template_arg, args):
+    conditions = await build_condition_list(config, template_arg, args)
+    return cg.new_Pvariable(condition_id, template_arg, conditions)
+
+
+@register_condition("any", OrCondition, validate_condition_list)
+async def any_condition_to_code(config, condition_id, template_arg, args):
+    conditions = await build_condition_list(config, template_arg, args)
+    return cg.new_Pvariable(condition_id, template_arg, conditions)
+
+
 @register_condition("not", NotCondition, validate_potentially_and_condition)
 async def not_condition_to_code(config, condition_id, template_arg, args):
     condition = await build_condition(config, template_arg, args)
@@ -223,15 +244,21 @@ async def delay_action_to_code(config, action_id, template_arg, args):
     IfAction,
     cv.All(
         {
-            cv.Required(CONF_CONDITION): validate_potentially_and_condition,
+            cv.Exclusive(
+                CONF_CONDITION, CONF_CONDITION
+            ): validate_potentially_and_condition,
+            cv.Exclusive(CONF_ANY, CONF_CONDITION): validate_potentially_or_condition,
+            cv.Exclusive(CONF_ALL, CONF_CONDITION): validate_potentially_and_condition,
             cv.Optional(CONF_THEN): validate_action_list,
             cv.Optional(CONF_ELSE): validate_action_list,
         },
         cv.has_at_least_one_key(CONF_THEN, CONF_ELSE),
+        cv.has_at_least_one_key(CONF_CONDITION, CONF_ANY, CONF_ALL),
     ),
 )
 async def if_action_to_code(config, action_id, template_arg, args):
-    conditions = await build_condition(config[CONF_CONDITION], template_arg, args)
+    cond_conf = next(el for el in config if el in (CONF_ANY, CONF_ALL, CONF_CONDITION))
+    conditions = await build_condition(config[cond_conf], template_arg, args)
     var = cg.new_Pvariable(action_id, template_arg, conditions)
     if CONF_THEN in config:
         actions = await build_action_list(config[CONF_THEN], template_arg, args)

esphome/components/aic3204/aic3204.cpp

@@ -0,0 +1,173 @@
+#include "aic3204.h"
+
+#include "esphome/core/defines.h"
+#include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace aic3204 {
+
+static const char *const TAG = "aic3204";
+
+#define ERROR_CHECK(err, msg) \
+  if (!(err)) { \
+    ESP_LOGE(TAG, msg); \
+    this->mark_failed(); \
+    return; \
+  }
+
+void AIC3204::setup() {
+  ESP_LOGCONFIG(TAG, "Setting up AIC3204...");
+
+  // Set register page to 0
+  ERROR_CHECK(this->write_byte(AIC3204_PAGE_CTRL, 0x00), "Set page 0 failed");
+  // Initiate SW reset (PLL is powered off as part of reset)
+  ERROR_CHECK(this->write_byte(AIC3204_SW_RST, 0x01), "Software reset failed");
+  // *** Program clock settings ***
+  // Default is CODEC_CLKIN is from MCLK pin. Don't need to change this.
+  // MDAC*NDAC*FOSR*48Khz = mClk (24.576 MHz when the XMOS is expecting 48kHz audio)
+  // (See page 51 of https://www.ti.com/lit/ml/slaa557/slaa557.pdf)
+  // We do need MDAC*DOSR/32 >= the resource compute level for the processing block
+  // So here 2*128/32 = 8, which is equal to processing block 1 's resource compute
+  // See page 5 of https://www.ti.com/lit/an/slaa404c/slaa404c.pdf for the workflow
+  // for determining these settings.
+
+  // Power up NDAC and set to 2
+  ERROR_CHECK(this->write_byte(AIC3204_NDAC, 0x82), "Set NDAC failed");
+  // Power up MDAC and set to 2
+  ERROR_CHECK(this->write_byte(AIC3204_MDAC, 0x82), "Set MDAC failed");
+  // Program DOSR = 128
+  ERROR_CHECK(this->write_byte(AIC3204_DOSR, 0x80), "Set DOSR failed");
+  // Set Audio Interface Config: I2S, 32 bits, DOUT always driving
+  ERROR_CHECK(this->write_byte(AIC3204_CODEC_IF, 0x30), "Set CODEC_IF failed");
+  // For I2S Firmware only, set SCLK/MFP3 pin as Audio Data In
+  ERROR_CHECK(this->write_byte(AIC3204_SCLK_MFP3, 0x02), "Set SCLK/MFP3 failed");
+  ERROR_CHECK(this->write_byte(AIC3204_AUDIO_IF_4, 0x01), "Set AUDIO_IF_4 failed");
+  ERROR_CHECK(this->write_byte(AIC3204_AUDIO_IF_5, 0x01), "Set AUDIO_IF_5 failed");
+  // Program the DAC processing block to be used - PRB_P1
+  ERROR_CHECK(this->write_byte(AIC3204_DAC_SIG_PROC, 0x01), "Set DAC_SIG_PROC failed");
+
+  // *** Select Page 1 ***
+  ERROR_CHECK(this->write_byte(AIC3204_PAGE_CTRL, 0x01), "Set page 1 failed");
+  // Enable the internal AVDD_LDO:
+  ERROR_CHECK(this->write_byte(AIC3204_LDO_CTRL, 0x09), "Set LDO_CTRL failed");
+  // *** Program Analog Blocks ***
+  // Disable Internal Crude AVdd in presence of external AVdd supply or before powering up internal AVdd LDO
+  ERROR_CHECK(this->write_byte(AIC3204_PWR_CFG, 0x08), "Set PWR_CFG failed");
+  // Enable Master Analog Power Control
+  ERROR_CHECK(this->write_byte(AIC3204_LDO_CTRL, 0x01), "Set LDO_CTRL failed");
+  // Page 125: Common mode control register, set d6 to 1 to make the full chip common mode = 0.75 v
+  // We are using the internal AVdd regulator with a nominal output of 1.72 V (see LDO_CTRL_REGISTER on page 123)
+  // Page 86 says to only set the common mode voltage to 0.9 v if AVdd >= 1.8... but it isn't on our hardware
+  // We also adjust the HPL and HPR gains to -2dB gian later in this config flow compensate (see page 47)
+  // (All pages refer to the TLV320AIC3204 Application Reference Guide)
+  ERROR_CHECK(this->write_byte(AIC3204_CM_CTRL, 0x40), "Set CM_CTRL failed");
+  // *** Set PowerTune Modes ***
+  // Set the Left & Right DAC PowerTune mode to PTM_P3/4. Use Class-AB driver.
+  ERROR_CHECK(this->write_byte(AIC3204_PLAY_CFG1, 0x00), "Set PLAY_CFG1 failed");
+  ERROR_CHECK(this->write_byte(AIC3204_PLAY_CFG2, 0x00), "Set PLAY_CFG2 failed");
+  // Set the REF charging time to 40ms
+  ERROR_CHECK(this->write_byte(AIC3204_REF_STARTUP, 0x01), "Set REF_STARTUP failed");
+  // HP soft stepping settings for optimal pop performance at power up
+  // Rpop used is 6k with N = 6 and soft step = 20usec. This should work with 47uF coupling
+  // capacitor. Can try N=5,6 or 7 time constants as well. Trade-off delay vs “pop” sound.
+  ERROR_CHECK(this->write_byte(AIC3204_HP_START, 0x25), "Set HP_START failed");
+  // Route Left DAC to HPL
+  ERROR_CHECK(this->write_byte(AIC3204_HPL_ROUTE, 0x08), "Set HPL_ROUTE failed");
+  // Route Right DAC to HPR
+  ERROR_CHECK(this->write_byte(AIC3204_HPR_ROUTE, 0x08), "Set HPR_ROUTE failed");
+  // Route Left DAC to LOL
+  ERROR_CHECK(this->write_byte(AIC3204_LOL_ROUTE, 0x08), "Set LOL_ROUTE failed");
+  // Route Right DAC to LOR
+  ERROR_CHECK(this->write_byte(AIC3204_LOR_ROUTE, 0x08), "Set LOR_ROUTE failed");
+
+  // Unmute HPL and set gain to -2dB (see comment before configuring the AIC3204_CM_CTRL register)
+  ERROR_CHECK(this->write_byte(AIC3204_HPL_GAIN, 0x3e), "Set HPL_GAIN failed");
+  // Unmute HPR and set gain to -2dB (see comment before configuring the AIC3204_CM_CTRL register)
+  ERROR_CHECK(this->write_byte(AIC3204_HPR_GAIN, 0x3e), "Set HPR_GAIN failed");
+  // Unmute LOL and set gain to 0dB
+  ERROR_CHECK(this->write_byte(AIC3204_LOL_DRV_GAIN, 0x00), "Set LOL_DRV_GAIN failed");
+  // Unmute LOR and set gain to 0dB
+  ERROR_CHECK(this->write_byte(AIC3204_LOR_DRV_GAIN, 0x00), "Set LOR_DRV_GAIN failed");
+
+  // Power up HPL and HPR, LOL and LOR drivers
+  ERROR_CHECK(this->write_byte(AIC3204_OP_PWR_CTRL, 0x3C), "Set OP_PWR_CTRL failed");
+
+  // Wait for 2.5 sec for soft stepping to take effect before attempting power-up
+  this->set_timeout(2500, [this]() {
+    // *** Power Up DAC ***
+    // Select Page 0
+    ERROR_CHECK(this->write_byte(AIC3204_PAGE_CTRL, 0x00), "Set PAGE_CTRL failed");
+    // Power up the Left and Right DAC Channels. Route Left data to Left DAC and Right data to Right DAC.
+    // DAC Vol control soft step 1 step per DAC word clock.
+    ERROR_CHECK(this->write_byte(AIC3204_DAC_CH_SET1, 0xd4), "Set DAC_CH_SET1 failed");
+    // Set left and right DAC digital volume control
+    ERROR_CHECK(this->write_volume_(), "Set volume failed");
+    // Unmute left and right channels
+    ERROR_CHECK(this->write_mute_(), "Set mute failed");
+  });
+}
+
+void AIC3204::dump_config() {
+  ESP_LOGCONFIG(TAG, "AIC3204:");
+  LOG_I2C_DEVICE(this);
+
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "Communication with AIC3204 failed");
+  }
+}
+
+bool AIC3204::set_mute_off() {
+  this->is_muted_ = false;
+  return this->write_mute_();
+}
+
+bool AIC3204::set_mute_on() {
+  this->is_muted_ = true;
+  return this->write_mute_();
+}
+
+bool AIC3204::set_auto_mute_mode(uint8_t auto_mute_mode) {
+  this->auto_mute_mode_ = auto_mute_mode & 0x07;
+  ESP_LOGVV(TAG, "Setting auto_mute_mode to 0x%.2x", this->auto_mute_mode_);
+  return this->write_mute_();
+}
+
+bool AIC3204::set_volume(float volume) {
+  this->volume_ = clamp<float>(volume, 0.0, 1.0);
+  return this->write_volume_();
+}
+
+bool AIC3204::is_muted() { return this->is_muted_; }
+
+float AIC3204::volume() { return this->volume_; }
+
+bool AIC3204::write_mute_() {
+  uint8_t mute_mode_byte = this->auto_mute_mode_ << 4;  // auto-mute control is bits 4-6
+  mute_mode_byte |= this->is_muted_ ? 0x0c : 0x00;      // mute bits are 2-3
+  if (!this->write_byte(AIC3204_PAGE_CTRL, 0x00) || !this->write_byte(AIC3204_DAC_CH_SET2, mute_mode_byte)) {
+    ESP_LOGE(TAG, "Writing mute modes failed");
+    return false;
+  }
+  return true;
+}
+
+bool AIC3204::write_volume_() {
+  const int8_t dvc_min_byte = -127;
+  const int8_t dvc_max_byte = 48;
+
+  int8_t volume_byte = dvc_min_byte + (this->volume_ * (dvc_max_byte - dvc_min_byte));
+  volume_byte = clamp<int8_t>(volume_byte, dvc_min_byte, dvc_max_byte);
+
+  ESP_LOGVV(TAG, "Setting volume to 0x%.2x", volume_byte & 0xFF);
+
+  if ((!this->write_byte(AIC3204_PAGE_CTRL, 0x00)) || (!this->write_byte(AIC3204_DACL_VOL_D, volume_byte)) ||
+      (!this->write_byte(AIC3204_DACR_VOL_D, volume_byte))) {
+    ESP_LOGE(TAG, "Writing volume failed");
+    return false;
+  }
+  return true;
+}
+
+}  // namespace aic3204
+}  // namespace esphome

esphome/components/aic3204/aic3204.h

@@ -0,0 +1,88 @@
+#pragma once
+
+#include "esphome/components/audio_dac/audio_dac.h"
+#include "esphome/components/i2c/i2c.h"
+#include "esphome/core/component.h"
+#include "esphome/core/defines.h"
+#include "esphome/core/hal.h"
+
+namespace esphome {
+namespace aic3204 {
+
+// TLV320AIC3204 Register Addresses
+// Page 0
+static const uint8_t AIC3204_PAGE_CTRL = 0x00;     // Register 0  - Page Control
+static const uint8_t AIC3204_SW_RST = 0x01;        // Register 1  - Software Reset
+static const uint8_t AIC3204_CLK_PLL1 = 0x04;      // Register 4  - Clock Setting Register 1, Multiplexers
+static const uint8_t AIC3204_CLK_PLL2 = 0x05;      // Register 5  - Clock Setting Register 2, P and R values
+static const uint8_t AIC3204_CLK_PLL3 = 0x06;      // Register 6  - Clock Setting Register 3, J values
+static const uint8_t AIC3204_NDAC = 0x0B;          // Register 11 - NDAC Divider Value
+static const uint8_t AIC3204_MDAC = 0x0C;          // Register 12 - MDAC Divider Value
+static const uint8_t AIC3204_DOSR = 0x0E;          // Register 14 - DOSR Divider Value (LS Byte)
+static const uint8_t AIC3204_NADC = 0x12;          // Register 18 - NADC Divider Value
+static const uint8_t AIC3204_MADC = 0x13;          // Register 19 - MADC Divider Value
+static const uint8_t AIC3204_AOSR = 0x14;          // Register 20 - AOSR Divider Value
+static const uint8_t AIC3204_CODEC_IF = 0x1B;      // Register 27 - CODEC Interface Control
+static const uint8_t AIC3204_AUDIO_IF_4 = 0x1F;    // Register 31 - Audio Interface Setting Register 4
+static const uint8_t AIC3204_AUDIO_IF_5 = 0x20;    // Register 32 - Audio Interface Setting Register 5
+static const uint8_t AIC3204_SCLK_MFP3 = 0x38;     // Register 56 - SCLK/MFP3 Function Control
+static const uint8_t AIC3204_DAC_SIG_PROC = 0x3C;  // Register 60 - DAC Sig Processing Block Control
+static const uint8_t AIC3204_ADC_SIG_PROC = 0x3D;  // Register 61 - ADC Sig Processing Block Control
+static const uint8_t AIC3204_DAC_CH_SET1 = 0x3F;   // Register 63 - DAC Channel Setup 1
+static const uint8_t AIC3204_DAC_CH_SET2 = 0x40;   // Register 64 - DAC Channel Setup 2
+static const uint8_t AIC3204_DACL_VOL_D = 0x41;    // Register 65 - DAC Left Digital Vol Control
+static const uint8_t AIC3204_DACR_VOL_D = 0x42;    // Register 66 - DAC Right Digital Vol Control
+static const uint8_t AIC3204_DRC_ENABLE = 0x44;
+static const uint8_t AIC3204_ADC_CH_SET = 0x51;    // Register 81 - ADC Channel Setup
+static const uint8_t AIC3204_ADC_FGA_MUTE = 0x52;  // Register 82 - ADC Fine Gain Adjust/Mute
+
+// Page 1
+static const uint8_t AIC3204_PWR_CFG = 0x01;       // Register 1  - Power Config
+static const uint8_t AIC3204_LDO_CTRL = 0x02;      // Register 2  - LDO Control
+static const uint8_t AIC3204_PLAY_CFG1 = 0x03;     // Register 3  - Playback Config 1
+static const uint8_t AIC3204_PLAY_CFG2 = 0x04;     // Register 4  - Playback Config 2
+static const uint8_t AIC3204_OP_PWR_CTRL = 0x09;   // Register 9  - Output Driver Power Control
+static const uint8_t AIC3204_CM_CTRL = 0x0A;       // Register 10 - Common Mode Control
+static const uint8_t AIC3204_HPL_ROUTE = 0x0C;     // Register 12 - HPL Routing Select
+static const uint8_t AIC3204_HPR_ROUTE = 0x0D;     // Register 13 - HPR Routing Select
+static const uint8_t AIC3204_LOL_ROUTE = 0x0E;     // Register 14 - LOL Routing Selection
+static const uint8_t AIC3204_LOR_ROUTE = 0x0F;     // Register 15 - LOR Routing Selection
+static const uint8_t AIC3204_HPL_GAIN = 0x10;      // Register 16 - HPL Driver Gain
+static const uint8_t AIC3204_HPR_GAIN = 0x11;      // Register 17 - HPR Driver Gain
+static const uint8_t AIC3204_LOL_DRV_GAIN = 0x12;  // Register 18 - LOL Driver Gain Setting
+static const uint8_t AIC3204_LOR_DRV_GAIN = 0x13;  // Register 19 - LOR Driver Gain Setting
+static const uint8_t AIC3204_HP_START = 0x14;      // Register 20 - Headphone Driver Startup
+static const uint8_t AIC3204_LPGA_P_ROUTE = 0x34;  // Register 52 - Left PGA Positive Input Route
+static const uint8_t AIC3204_LPGA_N_ROUTE = 0x36;  // Register 54 - Left PGA Negative Input Route
+static const uint8_t AIC3204_RPGA_P_ROUTE = 0x37;  // Register 55 - Right PGA Positive Input Route
+static const uint8_t AIC3204_RPGA_N_ROUTE = 0x39;  // Register 57 - Right PGA Negative Input Route
+static const uint8_t AIC3204_LPGA_VOL = 0x3B;      // Register 59 - Left PGA Volume
+static const uint8_t AIC3204_RPGA_VOL = 0x3C;      // Register 60 - Right PGA Volume
+static const uint8_t AIC3204_ADC_PTM = 0x3D;       // Register 61 - ADC Power Tune Config
+static const uint8_t AIC3204_AN_IN_CHRG = 0x47;    // Register 71 - Analog Input Quick Charging Config
+static const uint8_t AIC3204_REF_STARTUP = 0x7B;   // Register 123 - Reference Power Up Config
+
+class AIC3204 : public audio_dac::AudioDac, public Component, public i2c::I2CDevice {
+ public:
+  void setup() override;
+  void dump_config() override;
+  float get_setup_priority() const override { return setup_priority::DATA; }
+
+  bool set_mute_off() override;
+  bool set_mute_on() override;
+  bool set_auto_mute_mode(uint8_t auto_mute_mode);
+  bool set_volume(float volume) override;
+
+  bool is_muted() override;
+  float volume() override;
+
+ protected:
+  bool write_mute_();
+  bool write_volume_();
+
+  uint8_t auto_mute_mode_{0};
+  float volume_{0};
+};
+
+}  // namespace aic3204
+}  // namespace esphome

esphome/components/aic3204/audio_dac.py

@@ -0,0 +1,52 @@
+from esphome import automation
+import esphome.codegen as cg
+from esphome.components import i2c
+from esphome.components.audio_dac import AudioDac
+import esphome.config_validation as cv
+from esphome.const import CONF_ID, CONF_MODE
+
+CODEOWNERS = ["@kbx81"]
+DEPENDENCIES = ["i2c"]
+
+aic3204_ns = cg.esphome_ns.namespace("aic3204")
+AIC3204 = aic3204_ns.class_("AIC3204", AudioDac, cg.Component, i2c.I2CDevice)
+
+SetAutoMuteAction = aic3204_ns.class_("SetAutoMuteAction", automation.Action)
+
+CONFIG_SCHEMA = (
+    cv.Schema(
+        {
+            cv.GenerateID(): cv.declare_id(AIC3204),
+        }
+    )
+    .extend(cv.COMPONENT_SCHEMA)
+    .extend(i2c.i2c_device_schema(0x18))
+)
+
+
+SET_AUTO_MUTE_ACTION_SCHEMA = cv.maybe_simple_value(
+    {
+        cv.GenerateID(): cv.use_id(AIC3204),
+        cv.Required(CONF_MODE): cv.templatable(cv.int_range(max=7, min=0)),
+    },
+    key=CONF_MODE,
+)
+
+
+@automation.register_action(
+    "aic3204.set_auto_mute_mode", SetAutoMuteAction, SET_AUTO_MUTE_ACTION_SCHEMA
+)
+async def aic3204_set_volume_to_code(config, action_id, template_arg, args):
+    paren = await cg.get_variable(config[CONF_ID])
+    var = cg.new_Pvariable(action_id, template_arg, paren)
+
+    template_ = await cg.templatable(config.get(CONF_MODE), args, int)
+    cg.add(var.set_auto_mute_mode(template_))
+
+    return var
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+    await i2c.register_i2c_device(var, config)

esphome/components/aic3204/automation.h

@@ -0,0 +1,23 @@
+#pragma once
+
+#include "esphome/core/automation.h"
+#include "esphome/core/component.h"
+#include "aic3204.h"
+
+namespace esphome {
+namespace aic3204 {
+
+template<typename... Ts> class SetAutoMuteAction : public Action<Ts...> {
+ public:
+  explicit SetAutoMuteAction(AIC3204 *aic3204) : aic3204_(aic3204) {}
+
+  TEMPLATABLE_VALUE(uint8_t, auto_mute_mode)
+
+  void play(Ts... x) override { this->aic3204_->set_auto_mute_mode(this->auto_mute_mode_.value(x...)); }
+
+ protected:
+  AIC3204 *aic3204_;
+};
+
+}  // namespace aic3204
+}  // namespace esphome

esphome/components/alarm_control_panel/__init__.py

@@ -9,7 +9,7 @@ from esphome.const import (
     CONF_MQTT_ID,
     CONF_ON_STATE,
     CONF_TRIGGER_ID,
-    CONF_WEB_SERVER_ID,
+    CONF_WEB_SERVER,
 )
 from esphome.core import CORE, coroutine_with_priority
 from esphome.cpp_helpers import setup_entity
@@ -195,9 +195,8 @@ async def setup_alarm_control_panel_core_(var, config):
     for conf in config.get(CONF_ON_READY, []):
         trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
         await automation.build_automation(trigger, [], conf)
-    if (webserver_id := config.get(CONF_WEB_SERVER_ID)) is not None:
+    if web_server_config := config.get(CONF_WEB_SERVER):
-        web_server_ = await cg.get_variable(webserver_id)
+        await web_server.add_entity_config(var, web_server_config)
-        web_server.add_entity_to_sorting_list(web_server_, var, config)
     if mqtt_id := config.get(CONF_MQTT_ID):
         mqtt_ = cg.new_Pvariable(mqtt_id, var)
         await mqtt.register_mqtt_component(mqtt_, config)

esphome/components/animation/__init__.py

@@ -1,26 +1,26 @@
 import logging
 
 from esphome import automation, core
+import esphome.codegen as cg
 from esphome.components import font
 import esphome.components.image as espImage
 from esphome.components.image import (
     CONF_USE_TRANSPARENCY,
     LOCAL_SCHEMA,
-    WEB_SCHEMA,
-    SOURCE_WEB,
     SOURCE_LOCAL,
+    SOURCE_WEB,
+    WEB_SCHEMA,
 )
 import esphome.config_validation as cv
-import esphome.codegen as cg
 from esphome.const import (
     CONF_FILE,
     CONF_ID,
+    CONF_PATH,
     CONF_RAW_DATA_ID,
     CONF_REPEAT,
     CONF_RESIZE,
-    CONF_TYPE,
     CONF_SOURCE,
-    CONF_PATH,
+    CONF_TYPE,
     CONF_URL,
 )
 from esphome.core import CORE, HexInt
@@ -172,6 +172,9 @@ async def to_code(config):
         path = CORE.relative_config_path(conf_file[CONF_PATH])
     elif conf_file[CONF_SOURCE] == SOURCE_WEB:
         path = espImage.compute_local_image_path(conf_file).as_posix()
+    else:
+        raise core.EsphomeError(f"Unknown animation source: {conf_file[CONF_SOURCE]}")
+
     try:
         image = Image.open(path)
     except Exception as e:
@@ -183,8 +186,7 @@ async def to_code(config):
         new_width_max, new_height_max = config[CONF_RESIZE]
         ratio = min(new_width_max / width, new_height_max / height)
         width, height = int(width * ratio), int(height * ratio)
-    else:
+    elif width > 500 or height > 500:
-        if width > 500 or height > 500:
         _LOGGER.warning(
             'The image "%s" you requested is very big. Please consider'
             " using the resize parameter.",
@@ -306,6 +308,8 @@ async def to_code(config):
             if transparent:
                 alpha = image.split()[-1]
                 has_alpha = alpha.getextrema()[0] < 0xFF
+            else:
+                has_alpha = False
             frame = image.convert("1", dither=Image.Dither.NONE)
             if CONF_RESIZE in config:
                 frame = frame.resize([width, height])

esphome/components/api/api.proto

@@ -62,6 +62,8 @@ service APIConnection {
   rpc unsubscribe_bluetooth_le_advertisements(UnsubscribeBluetoothLEAdvertisementsRequest) returns (void) {}
 
   rpc subscribe_voice_assistant(SubscribeVoiceAssistantRequest) returns (void) {}
+  rpc voice_assistant_get_configuration(VoiceAssistantConfigurationRequest) returns (VoiceAssistantConfigurationResponse) {}
+  rpc voice_assistant_set_configuration(VoiceAssistantSetConfiguration) returns (void) {}
 
   rpc alarm_control_panel_command (AlarmControlPanelCommandRequest) returns (void) {}
 }
@@ -1118,6 +1120,7 @@ message MediaPlayerSupportedFormat {
   uint32 sample_rate = 2;
   uint32 num_channels = 3;
   MediaPlayerFormatPurpose purpose = 4;
+  uint32 sample_bytes = 5;
 }
 message ListEntitiesMediaPlayerResponse {
   option (id) = 63;
@@ -1570,6 +1573,36 @@ message VoiceAssistantAnnounceFinished {
   bool success = 1;
 }
 
+message VoiceAssistantWakeWord {
+  string id = 1;
+  string wake_word = 2;
+  repeated string trained_languages = 3;
+}
+
+message VoiceAssistantConfigurationRequest {
+  option (id) = 121;
+  option (source) = SOURCE_CLIENT;
+  option (ifdef) = "USE_VOICE_ASSISTANT";
+}
+
+message VoiceAssistantConfigurationResponse {
+  option (id) = 122;
+  option (source) = SOURCE_SERVER;
+  option (ifdef) = "USE_VOICE_ASSISTANT";
+
+  repeated VoiceAssistantWakeWord available_wake_words = 1;
+  repeated string active_wake_words = 2;
+  uint32 max_active_wake_words = 3;
+}
+
+message VoiceAssistantSetConfiguration {
+  option (id) = 123;
+  option (source) = SOURCE_CLIENT;
+  option (ifdef) = "USE_VOICE_ASSISTANT";
+
+  repeated string active_wake_words = 1;
+}
+
 // ==================== ALARM CONTROL PANEL ====================
 enum AlarmControlPanelState {
   ALARM_STATE_DISARMED = 0;

esphome/components/api/api_connection.cpp

@@ -1,4 +1,5 @@
 #include "api_connection.h"
+#ifdef USE_API
 #include <cerrno>
 #include <cinttypes>
 #include <utility>
@@ -1032,6 +1033,7 @@ bool APIConnection::send_media_player_info(media_player::MediaPlayer *media_play
     media_format.sample_rate = supported_format.sample_rate;
     media_format.num_channels = supported_format.num_channels;
     media_format.purpose = static_cast<enums::MediaPlayerFormatPurpose>(supported_format.purpose);
+    media_format.sample_bytes = supported_format.sample_bytes;
     msg.supported_formats.push_back(media_format);
   }
 
@@ -1223,6 +1225,42 @@ void APIConnection::on_voice_assistant_announce_request(const VoiceAssistantAnno
   }
 }
 
+VoiceAssistantConfigurationResponse APIConnection::voice_assistant_get_configuration(
+    const VoiceAssistantConfigurationRequest &msg) {
+  VoiceAssistantConfigurationResponse resp;
+  if (voice_assistant::global_voice_assistant != nullptr) {
+    if (voice_assistant::global_voice_assistant->get_api_connection() != this) {
+      return resp;
+    }
+
+    auto &config = voice_assistant::global_voice_assistant->get_configuration();
+    for (auto &wake_word : config.available_wake_words) {
+      VoiceAssistantWakeWord resp_wake_word;
+      resp_wake_word.id = wake_word.id;
+      resp_wake_word.wake_word = wake_word.wake_word;
+      for (const auto &lang : wake_word.trained_languages) {
+        resp_wake_word.trained_languages.push_back(lang);
+      }
+      resp.available_wake_words.push_back(std::move(resp_wake_word));
+    }
+    for (auto &wake_word_id : config.active_wake_words) {
+      resp.active_wake_words.push_back(wake_word_id);
+    }
+    resp.max_active_wake_words = config.max_active_wake_words;
+  }
+  return resp;
+}
+
+void APIConnection::voice_assistant_set_configuration(const VoiceAssistantSetConfiguration &msg) {
+  if (voice_assistant::global_voice_assistant != nullptr) {
+    if (voice_assistant::global_voice_assistant->get_api_connection() != this) {
+      return;
+    }
+
+    voice_assistant::global_voice_assistant->on_set_configuration(msg.active_wake_words);
+  }
+}
+
 #endif
 
 #ifdef USE_ALARM_CONTROL_PANEL
@@ -1531,3 +1569,4 @@ void APIConnection::on_fatal_error() {
 
 }  // namespace api
 }  // namespace esphome
+#endif

esphome/components/api/api_connection.h

@@ -1,12 +1,13 @@
 #pragma once
 
+#include "esphome/core/defines.h"
+#ifdef USE_API
 #include "api_frame_helper.h"
 #include "api_pb2.h"
 #include "api_pb2_service.h"
 #include "api_server.h"
 #include "esphome/core/application.h"
 #include "esphome/core/component.h"
-#include "esphome/core/defines.h"
 
 #include <vector>
 
@@ -152,6 +153,9 @@ class APIConnection : public APIServerConnection {
   void on_voice_assistant_audio(const VoiceAssistantAudio &msg) override;
   void on_voice_assistant_timer_event_response(const VoiceAssistantTimerEventResponse &msg) override;
   void on_voice_assistant_announce_request(const VoiceAssistantAnnounceRequest &msg) override;
+  VoiceAssistantConfigurationResponse voice_assistant_get_configuration(
+      const VoiceAssistantConfigurationRequest &msg) override;
+  void voice_assistant_set_configuration(const VoiceAssistantSetConfiguration &msg) override;
 #endif
 
 #ifdef USE_ALARM_CONTROL_PANEL
@@ -265,3 +269,4 @@ class APIConnection : public APIServerConnection {
 
 }  // namespace api
 }  // namespace esphome
+#endif

esphome/components/api/api_frame_helper.cpp

@@ -1,5 +1,5 @@
 #include "api_frame_helper.h"
-
+#ifdef USE_API
 #include "esphome/core/log.h"
 #include "esphome/core/hal.h"
 #include "esphome/core/helpers.h"
@@ -1028,3 +1028,4 @@ APIError APIPlaintextFrameHelper::shutdown(int how) {
 
 }  // namespace api
 }  // namespace esphome
+#endif

esphome/components/api/api_frame_helper.h

@@ -5,7 +5,7 @@
 #include <vector>
 
 #include "esphome/core/defines.h"
-
+#ifdef USE_API
 #ifdef USE_API_NOISE
 #include "noise/protocol.h"
 #endif
@@ -190,3 +190,4 @@ class APIPlaintextFrameHelper : public APIFrameHelper {
 
 }  // namespace api
 }  // namespace esphome
+#endif

esphome/components/api/api_pb2.cpp

@@ -5149,6 +5149,10 @@ bool MediaPlayerSupportedFormat::decode_varint(uint32_t field_id, ProtoVarInt va
       this->purpose = value.as_enum<enums::MediaPlayerFormatPurpose>();
       return true;
     }
+    case 5: {
+      this->sample_bytes = value.as_uint32();
+      return true;
+    }
     default:
       return false;
   }
@@ -5168,6 +5172,7 @@ void MediaPlayerSupportedFormat::encode(ProtoWriteBuffer buffer) const {
   buffer.encode_uint32(2, this->sample_rate);
   buffer.encode_uint32(3, this->num_channels);
   buffer.encode_enum<enums::MediaPlayerFormatPurpose>(4, this->purpose);
+  buffer.encode_uint32(5, this->sample_bytes);
 }
 #ifdef HAS_PROTO_MESSAGE_DUMP
 void MediaPlayerSupportedFormat::dump_to(std::string &out) const {
@@ -5190,6 +5195,11 @@ void MediaPlayerSupportedFormat::dump_to(std::string &out) const {
   out.append("  purpose: ");
   out.append(proto_enum_to_string<enums::MediaPlayerFormatPurpose>(this->purpose));
   out.append("\n");
+
+  out.append("  sample_bytes: ");
+  sprintf(buffer, "%" PRIu32, this->sample_bytes);
+  out.append(buffer);
+  out.append("\n");
   out.append("}");
 }
 #endif
@@ -7114,6 +7124,140 @@ void VoiceAssistantAnnounceFinished::dump_to(std::string &out) const {
   out.append("}");
 }
 #endif
+bool VoiceAssistantWakeWord::decode_length(uint32_t field_id, ProtoLengthDelimited value) {
+  switch (field_id) {
+    case 1: {
+      this->id = value.as_string();
+      return true;
+    }
+    case 2: {
+      this->wake_word = value.as_string();
+      return true;
+    }
+    case 3: {
+      this->trained_languages.push_back(value.as_string());
+      return true;
+    }
+    default:
+      return false;
+  }
+}
+void VoiceAssistantWakeWord::encode(ProtoWriteBuffer buffer) const {
+  buffer.encode_string(1, this->id);
+  buffer.encode_string(2, this->wake_word);
+  for (auto &it : this->trained_languages) {
+    buffer.encode_string(3, it, true);
+  }
+}
+#ifdef HAS_PROTO_MESSAGE_DUMP
+void VoiceAssistantWakeWord::dump_to(std::string &out) const {
+  __attribute__((unused)) char buffer[64];
+  out.append("VoiceAssistantWakeWord {\n");
+  out.append("  id: ");
+  out.append("'").append(this->id).append("'");
+  out.append("\n");
+
+  out.append("  wake_word: ");
+  out.append("'").append(this->wake_word).append("'");
+  out.append("\n");
+
+  for (const auto &it : this->trained_languages) {
+    out.append("  trained_languages: ");
+    out.append("'").append(it).append("'");
+    out.append("\n");
+  }
+  out.append("}");
+}
+#endif
+void VoiceAssistantConfigurationRequest::encode(ProtoWriteBuffer buffer) const {}
+#ifdef HAS_PROTO_MESSAGE_DUMP
+void VoiceAssistantConfigurationRequest::dump_to(std::string &out) const {
+  out.append("VoiceAssistantConfigurationRequest {}");
+}
+#endif
+bool VoiceAssistantConfigurationResponse::decode_varint(uint32_t field_id, ProtoVarInt value) {
+  switch (field_id) {
+    case 3: {
+      this->max_active_wake_words = value.as_uint32();
+      return true;
+    }
+    default:
+      return false;
+  }
+}
+bool VoiceAssistantConfigurationResponse::decode_length(uint32_t field_id, ProtoLengthDelimited value) {
+  switch (field_id) {
+    case 1: {
+      this->available_wake_words.push_back(value.as_message<VoiceAssistantWakeWord>());
+      return true;
+    }
+    case 2: {
+      this->active_wake_words.push_back(value.as_string());
+      return true;
+    }
+    default:
+      return false;
+  }
+}
+void VoiceAssistantConfigurationResponse::encode(ProtoWriteBuffer buffer) const {
+  for (auto &it : this->available_wake_words) {
+    buffer.encode_message<VoiceAssistantWakeWord>(1, it, true);
+  }
+  for (auto &it : this->active_wake_words) {
+    buffer.encode_string(2, it, true);
+  }
+  buffer.encode_uint32(3, this->max_active_wake_words);
+}
+#ifdef HAS_PROTO_MESSAGE_DUMP
+void VoiceAssistantConfigurationResponse::dump_to(std::string &out) const {
+  __attribute__((unused)) char buffer[64];
+  out.append("VoiceAssistantConfigurationResponse {\n");
+  for (const auto &it : this->available_wake_words) {
+    out.append("  available_wake_words: ");
+    it.dump_to(out);
+    out.append("\n");
+  }
+
+  for (const auto &it : this->active_wake_words) {
+    out.append("  active_wake_words: ");
+    out.append("'").append(it).append("'");
+    out.append("\n");
+  }
+
+  out.append("  max_active_wake_words: ");
+  sprintf(buffer, "%" PRIu32, this->max_active_wake_words);
+  out.append(buffer);
+  out.append("\n");
+  out.append("}");
+}
+#endif
+bool VoiceAssistantSetConfiguration::decode_length(uint32_t field_id, ProtoLengthDelimited value) {
+  switch (field_id) {
+    case 1: {
+      this->active_wake_words.push_back(value.as_string());
+      return true;
+    }
+    default:
+      return false;
+  }
+}
+void VoiceAssistantSetConfiguration::encode(ProtoWriteBuffer buffer) const {
+  for (auto &it : this->active_wake_words) {
+    buffer.encode_string(1, it, true);
+  }
+}
+#ifdef HAS_PROTO_MESSAGE_DUMP
+void VoiceAssistantSetConfiguration::dump_to(std::string &out) const {
+  __attribute__((unused)) char buffer[64];
+  out.append("VoiceAssistantSetConfiguration {\n");
+  for (const auto &it : this->active_wake_words) {
+    out.append("  active_wake_words: ");
+    out.append("'").append(it).append("'");
+    out.append("\n");
+  }
+  out.append("}");
+}
+#endif
 bool ListEntitiesAlarmControlPanelResponse::decode_varint(uint32_t field_id, ProtoVarInt value) {
   switch (field_id) {
     case 6: {

esphome/components/api/api_pb2.h

@@ -1277,6 +1277,7 @@ class MediaPlayerSupportedFormat : public ProtoMessage {
   uint32_t sample_rate{0};
   uint32_t num_channels{0};
   enums::MediaPlayerFormatPurpose purpose{};
+  uint32_t sample_bytes{0};
   void encode(ProtoWriteBuffer buffer) const override;
 #ifdef HAS_PROTO_MESSAGE_DUMP
   void dump_to(std::string &out) const override;
@@ -1848,6 +1849,53 @@ class VoiceAssistantAnnounceFinished : public ProtoMessage {
  protected:
   bool decode_varint(uint32_t field_id, ProtoVarInt value) override;
 };
+class VoiceAssistantWakeWord : public ProtoMessage {
+ public:
+  std::string id{};
+  std::string wake_word{};
+  std::vector<std::string> trained_languages{};
+  void encode(ProtoWriteBuffer buffer) const override;
+#ifdef HAS_PROTO_MESSAGE_DUMP
+  void dump_to(std::string &out) const override;
+#endif
+
+ protected:
+  bool decode_length(uint32_t field_id, ProtoLengthDelimited value) override;
+};
+class VoiceAssistantConfigurationRequest : public ProtoMessage {
+ public:
+  void encode(ProtoWriteBuffer buffer) const override;
+#ifdef HAS_PROTO_MESSAGE_DUMP
+  void dump_to(std::string &out) const override;
+#endif
+
+ protected:
+};
+class VoiceAssistantConfigurationResponse : public ProtoMessage {
+ public:
+  std::vector<VoiceAssistantWakeWord> available_wake_words{};
+  std::vector<std::string> active_wake_words{};
+  uint32_t max_active_wake_words{0};
+  void encode(ProtoWriteBuffer buffer) const override;
+#ifdef HAS_PROTO_MESSAGE_DUMP
+  void dump_to(std::string &out) const override;
+#endif
+
+ protected:
+  bool decode_length(uint32_t field_id, ProtoLengthDelimited value) override;
+  bool decode_varint(uint32_t field_id, ProtoVarInt value) override;
+};
+class VoiceAssistantSetConfiguration : public ProtoMessage {
+ public:
+  std::vector<std::string> active_wake_words{};
+  void encode(ProtoWriteBuffer buffer) const override;
+#ifdef HAS_PROTO_MESSAGE_DUMP
+  void dump_to(std::string &out) const override;
+#endif
+
+ protected:
+  bool decode_length(uint32_t field_id, ProtoLengthDelimited value) override;
+};
 class ListEntitiesAlarmControlPanelResponse : public ProtoMessage {
  public:
   std::string object_id{};

esphome/components/api/api_pb2_service.cpp

@@ -496,6 +496,19 @@ bool APIServerConnectionBase::send_voice_assistant_announce_finished(const Voice
   return this->send_message_<VoiceAssistantAnnounceFinished>(msg, 120);
 }
 #endif
+#ifdef USE_VOICE_ASSISTANT
+#endif
+#ifdef USE_VOICE_ASSISTANT
+bool APIServerConnectionBase::send_voice_assistant_configuration_response(
+    const VoiceAssistantConfigurationResponse &msg) {
+#ifdef HAS_PROTO_MESSAGE_DUMP
+  ESP_LOGVV(TAG, "send_voice_assistant_configuration_response: %s", msg.dump().c_str());
+#endif
+  return this->send_message_<VoiceAssistantConfigurationResponse>(msg, 122);
+}
+#endif
+#ifdef USE_VOICE_ASSISTANT
+#endif
 #ifdef USE_ALARM_CONTROL_PANEL
 bool APIServerConnectionBase::send_list_entities_alarm_control_panel_response(
     const ListEntitiesAlarmControlPanelResponse &msg) {
@@ -1156,6 +1169,28 @@ bool APIServerConnectionBase::read_message(uint32_t msg_size, uint32_t msg_type,
       ESP_LOGVV(TAG, "on_voice_assistant_announce_request: %s", msg.dump().c_str());
 #endif
       this->on_voice_assistant_announce_request(msg);
+#endif
+      break;
+    }
+    case 121: {
+#ifdef USE_VOICE_ASSISTANT
+      VoiceAssistantConfigurationRequest msg;
+      msg.decode(msg_data, msg_size);
+#ifdef HAS_PROTO_MESSAGE_DUMP
+      ESP_LOGVV(TAG, "on_voice_assistant_configuration_request: %s", msg.dump().c_str());
+#endif
+      this->on_voice_assistant_configuration_request(msg);
+#endif
+      break;
+    }
+    case 123: {
+#ifdef USE_VOICE_ASSISTANT
+      VoiceAssistantSetConfiguration msg;
+      msg.decode(msg_data, msg_size);
+#ifdef HAS_PROTO_MESSAGE_DUMP
+      ESP_LOGVV(TAG, "on_voice_assistant_set_configuration: %s", msg.dump().c_str());
+#endif
+      this->on_voice_assistant_set_configuration(msg);
 #endif
       break;
     }
@@ -1646,6 +1681,35 @@ void APIServerConnection::on_subscribe_voice_assistant_request(const SubscribeVo
   this->subscribe_voice_assistant(msg);
 }
 #endif
+#ifdef USE_VOICE_ASSISTANT
+void APIServerConnection::on_voice_assistant_configuration_request(const VoiceAssistantConfigurationRequest &msg) {
+  if (!this->is_connection_setup()) {
+    this->on_no_setup_connection();
+    return;
+  }
+  if (!this->is_authenticated()) {
+    this->on_unauthenticated_access();
+    return;
+  }
+  VoiceAssistantConfigurationResponse ret = this->voice_assistant_get_configuration(msg);
+  if (!this->send_voice_assistant_configuration_response(ret)) {
+    this->on_fatal_error();
+  }
+}
+#endif
+#ifdef USE_VOICE_ASSISTANT
+void APIServerConnection::on_voice_assistant_set_configuration(const VoiceAssistantSetConfiguration &msg) {
+  if (!this->is_connection_setup()) {
+    this->on_no_setup_connection();
+    return;
+  }
+  if (!this->is_authenticated()) {
+    this->on_unauthenticated_access();
+    return;
+  }
+  this->voice_assistant_set_configuration(msg);
+}
+#endif
 #ifdef USE_ALARM_CONTROL_PANEL
 void APIServerConnection::on_alarm_control_panel_command_request(const AlarmControlPanelCommandRequest &msg) {
   if (!this->is_connection_setup()) {

esphome/components/api/api_pb2_service.h

@@ -253,6 +253,15 @@ class APIServerConnectionBase : public ProtoService {
 #ifdef USE_VOICE_ASSISTANT
   bool send_voice_assistant_announce_finished(const VoiceAssistantAnnounceFinished &msg);
 #endif
+#ifdef USE_VOICE_ASSISTANT
+  virtual void on_voice_assistant_configuration_request(const VoiceAssistantConfigurationRequest &value){};
+#endif
+#ifdef USE_VOICE_ASSISTANT
+  bool send_voice_assistant_configuration_response(const VoiceAssistantConfigurationResponse &msg);
+#endif
+#ifdef USE_VOICE_ASSISTANT
+  virtual void on_voice_assistant_set_configuration(const VoiceAssistantSetConfiguration &value){};
+#endif
 #ifdef USE_ALARM_CONTROL_PANEL
   bool send_list_entities_alarm_control_panel_response(const ListEntitiesAlarmControlPanelResponse &msg);
 #endif
@@ -425,6 +434,13 @@ class APIServerConnection : public APIServerConnectionBase {
 #ifdef USE_VOICE_ASSISTANT
   virtual void subscribe_voice_assistant(const SubscribeVoiceAssistantRequest &msg) = 0;
 #endif
+#ifdef USE_VOICE_ASSISTANT
+  virtual VoiceAssistantConfigurationResponse voice_assistant_get_configuration(
+      const VoiceAssistantConfigurationRequest &msg) = 0;
+#endif
+#ifdef USE_VOICE_ASSISTANT
+  virtual void voice_assistant_set_configuration(const VoiceAssistantSetConfiguration &msg) = 0;
+#endif
 #ifdef USE_ALARM_CONTROL_PANEL
   virtual void alarm_control_panel_command(const AlarmControlPanelCommandRequest &msg) = 0;
 #endif
@@ -526,6 +542,12 @@ class APIServerConnection : public APIServerConnectionBase {
 #ifdef USE_VOICE_ASSISTANT
   void on_subscribe_voice_assistant_request(const SubscribeVoiceAssistantRequest &msg) override;
 #endif
+#ifdef USE_VOICE_ASSISTANT
+  void on_voice_assistant_configuration_request(const VoiceAssistantConfigurationRequest &msg) override;
+#endif
+#ifdef USE_VOICE_ASSISTANT
+  void on_voice_assistant_set_configuration(const VoiceAssistantSetConfiguration &msg) override;
+#endif
 #ifdef USE_ALARM_CONTROL_PANEL
   void on_alarm_control_panel_command_request(const AlarmControlPanelCommandRequest &msg) override;
 #endif

esphome/components/api/api_server.cpp

@@ -1,4 +1,5 @@
 #include "api_server.h"
+#ifdef USE_API
 #include <cerrno>
 #include "api_connection.h"
 #include "esphome/components/network/util.h"
@@ -403,3 +404,4 @@ void APIServer::on_alarm_control_panel_update(alarm_control_panel::AlarmControlP
 
 }  // namespace api
 }  // namespace esphome
+#endif

esphome/components/api/api_server.h

@@ -1,5 +1,7 @@
 #pragma once
 
+#include "esphome/core/defines.h"
+#ifdef USE_API
 #include "api_noise_context.h"
 #include "api_pb2.h"
 #include "api_pb2_service.h"
@@ -7,7 +9,6 @@
 #include "esphome/core/automation.h"
 #include "esphome/core/component.h"
 #include "esphome/core/controller.h"
-#include "esphome/core/defines.h"
 #include "esphome/core/log.h"
 #include "list_entities.h"
 #include "subscribe_state.h"
@@ -153,3 +154,4 @@ template<typename... Ts> class APIConnectedCondition : public Condition<Ts...> {
 
 }  // namespace api
 }  // namespace esphome
+#endif

esphome/components/api/custom_api_device.h

@@ -1,9 +1,9 @@
 #pragma once
 
 #include <map>
-#include "user_services.h"
 #include "api_server.h"
-
+#ifdef USE_API
+#include "user_services.h"
 namespace esphome {
 namespace api {
 
@@ -216,3 +216,4 @@ class CustomAPIDevice {
 
 }  // namespace api
 }  // namespace esphome
+#endif

esphome/components/api/homeassistant_service.h

@@ -1,10 +1,10 @@
 #pragma once
 
+#include "api_server.h"
+#ifdef USE_API
+#include "api_pb2.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/automation.h"
-#include "api_pb2.h"
-#include "api_server.h"
-
 #include <vector>
 
 namespace esphome {
@@ -81,3 +81,4 @@ template<typename... Ts> class HomeAssistantServiceCallAction : public Action<Ts
 
 }  // namespace api
 }  // namespace esphome
+#endif

esphome/components/api/list_entities.cpp

@@ -1,4 +1,5 @@
 #include "list_entities.h"
+#ifdef USE_API
 #include "api_connection.h"
 #include "esphome/core/application.h"
 #include "esphome/core/log.h"
@@ -104,3 +105,4 @@ bool ListEntitiesIterator::on_update(update::UpdateEntity *update) { return this
 
 }  // namespace api
 }  // namespace esphome
+#endif

esphome/components/api/list_entities.h

@@ -1,9 +1,9 @@
 #pragma once
 
+#include "esphome/core/defines.h"
+#ifdef USE_API
 #include "esphome/core/component.h"
 #include "esphome/core/component_iterator.h"
-#include "esphome/core/defines.h"
-
 namespace esphome {
 namespace api {
 
@@ -87,3 +87,4 @@ class ListEntitiesIterator : public ComponentIterator {
 
 }  // namespace api
 }  // namespace esphome
+#endif

esphome/components/api/subscribe_state.cpp

@@ -1,4 +1,5 @@
 #include "subscribe_state.h"
+#ifdef USE_API
 #include "api_connection.h"
 #include "esphome/core/log.h"
 
@@ -84,3 +85,4 @@ InitialStateIterator::InitialStateIterator(APIConnection *client) : client_(clie
 
 }  // namespace api
 }  // namespace esphome
+#endif

esphome/components/api/subscribe_state.h

@@ -1,10 +1,10 @@
 #pragma once
 
+#include "esphome/core/defines.h"
+#ifdef USE_API
 #include "esphome/core/component.h"
 #include "esphome/core/component_iterator.h"
 #include "esphome/core/controller.h"
-#include "esphome/core/defines.h"
-
 namespace esphome {
 namespace api {
 
@@ -82,3 +82,4 @@ class InitialStateIterator : public ComponentIterator {
 
 }  // namespace api
 }  // namespace esphome
+#endif

esphome/components/audio/__init__.py

@@ -0,0 +1,9 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+
+CODEOWNERS = ["@kahrendt"]
+audio_ns = cg.esphome_ns.namespace("audio")
+
+CONFIG_SCHEMA = cv.All(
+    cv.Schema({}),
+)

esphome/components/audio/audio.h

@@ -0,0 +1,21 @@
+#pragma once
+
+#include <cstdint>
+#include <stddef.h>
+
+namespace esphome {
+namespace audio {
+
+struct AudioStreamInfo {
+  bool operator==(const AudioStreamInfo &rhs) const {
+    return (channels == rhs.channels) && (bits_per_sample == rhs.bits_per_sample) && (sample_rate == rhs.sample_rate);
+  }
+  bool operator!=(const AudioStreamInfo &rhs) const { return !operator==(rhs); }
+  size_t get_bytes_per_sample() const { return bits_per_sample / 8; }
+  uint8_t channels = 1;
+  uint8_t bits_per_sample = 16;
+  uint32_t sample_rate = 16000;
+};
+
+}  // namespace audio
+}  // namespace esphome

esphome/components/audio_dac/__init__.py

@@ -0,0 +1,57 @@
+from esphome import automation
+from esphome.automation import maybe_simple_id
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.const import CONF_ID, CONF_VOLUME
+from esphome.core import coroutine_with_priority
+
+CODEOWNERS = ["@kbx81"]
+IS_PLATFORM_COMPONENT = True
+
+audio_dac_ns = cg.esphome_ns.namespace("audio_dac")
+AudioDac = audio_dac_ns.class_("AudioDac")
+
+MuteOffAction = audio_dac_ns.class_("MuteOffAction", automation.Action)
+MuteOnAction = audio_dac_ns.class_("MuteOnAction", automation.Action)
+SetVolumeAction = audio_dac_ns.class_("SetVolumeAction", automation.Action)
+
+
+MUTE_ACTION_SCHEMA = maybe_simple_id(
+    {
+        cv.GenerateID(): cv.use_id(AudioDac),
+    }
+)
+
+SET_VOLUME_ACTION_SCHEMA = cv.maybe_simple_value(
+    {
+        cv.GenerateID(): cv.use_id(AudioDac),
+        cv.Required(CONF_VOLUME): cv.templatable(cv.percentage),
+    },
+    key=CONF_VOLUME,
+)
+
+
+@automation.register_action("audio_dac.mute_off", MuteOffAction, MUTE_ACTION_SCHEMA)
+@automation.register_action("audio_dac.mute_on", MuteOnAction, MUTE_ACTION_SCHEMA)
+async def audio_dac_mute_action_to_code(config, action_id, template_arg, args):
+    paren = await cg.get_variable(config[CONF_ID])
+    return cg.new_Pvariable(action_id, template_arg, paren)
+
+
+@automation.register_action(
+    "audio_dac.set_volume", SetVolumeAction, SET_VOLUME_ACTION_SCHEMA
+)
+async def audio_dac_set_volume_to_code(config, action_id, template_arg, args):
+    paren = await cg.get_variable(config[CONF_ID])
+    var = cg.new_Pvariable(action_id, template_arg, paren)
+
+    template_ = await cg.templatable(config.get(CONF_VOLUME), args, float)
+    cg.add(var.set_volume(template_))
+
+    return var
+
+
+@coroutine_with_priority(100.0)
+async def to_code(config):
+    cg.add_define("USE_AUDIO_DAC")
+    cg.add_global(audio_dac_ns.using)

esphome/components/audio_dac/audio_dac.h

@@ -0,0 +1,23 @@
+#pragma once
+
+#include "esphome/core/defines.h"
+#include "esphome/core/hal.h"
+
+namespace esphome {
+namespace audio_dac {
+
+class AudioDac {
+ public:
+  virtual bool set_mute_off() = 0;
+  virtual bool set_mute_on() = 0;
+  virtual bool set_volume(float volume) = 0;
+
+  virtual bool is_muted() = 0;
+  virtual float volume() = 0;
+
+ protected:
+  bool is_muted_{false};
+};
+
+}  // namespace audio_dac
+}  // namespace esphome

esphome/components/audio_dac/automation.h

@@ -0,0 +1,43 @@
+#pragma once
+
+#include "esphome/core/automation.h"
+#include "esphome/core/component.h"
+#include "audio_dac.h"
+
+namespace esphome {
+namespace audio_dac {
+
+template<typename... Ts> class MuteOffAction : public Action<Ts...> {
+ public:
+  explicit MuteOffAction(AudioDac *audio_dac) : audio_dac_(audio_dac) {}
+
+  void play(Ts... x) override { this->audio_dac_->set_mute_off(); }
+
+ protected:
+  AudioDac *audio_dac_;
+};
+
+template<typename... Ts> class MuteOnAction : public Action<Ts...> {
+ public:
+  explicit MuteOnAction(AudioDac *audio_dac) : audio_dac_(audio_dac) {}
+
+  void play(Ts... x) override { this->audio_dac_->set_mute_on(); }
+
+ protected:
+  AudioDac *audio_dac_;
+};
+
+template<typename... Ts> class SetVolumeAction : public Action<Ts...> {
+ public:
+  explicit SetVolumeAction(AudioDac *audio_dac) : audio_dac_(audio_dac) {}
+
+  TEMPLATABLE_VALUE(float, volume)
+
+  void play(Ts... x) override { this->audio_dac_->set_volume(this->volume_.value(x...)); }
+
+ protected:
+  AudioDac *audio_dac_;
+};
+
+}  // namespace audio_dac
+}  // namespace esphome

esphome/components/axs15231/__init__.py

@@ -0,0 +1,6 @@
+import esphome.codegen as cg
+
+CODEOWNERS = ["@clydebarrow"]
+DEPENDENCIES = ["i2c"]
+
+axs15231_ns = cg.esphome_ns.namespace("axs15231")

esphome/components/axs15231/touchscreen/__init__.py

@@ -0,0 +1,36 @@
+from esphome import pins
+import esphome.codegen as cg
+from esphome.components import i2c, touchscreen
+import esphome.config_validation as cv
+from esphome.const import CONF_ID, CONF_INTERRUPT_PIN, CONF_RESET_PIN
+
+from .. import axs15231_ns
+
+AXS15231Touchscreen = axs15231_ns.class_(
+    "AXS15231Touchscreen",
+    touchscreen.Touchscreen,
+    i2c.I2CDevice,
+)
+
+CONFIG_SCHEMA = (
+    touchscreen.touchscreen_schema("50ms")
+    .extend(
+        {
+            cv.GenerateID(): cv.declare_id(AXS15231Touchscreen),
+            cv.Optional(CONF_INTERRUPT_PIN): pins.internal_gpio_input_pin_schema,
+            cv.Optional(CONF_RESET_PIN): pins.gpio_output_pin_schema,
+        }
+    )
+    .extend(i2c.i2c_device_schema(0x3B))
+)
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await touchscreen.register_touchscreen(var, config)
+    await i2c.register_i2c_device(var, config)
+
+    if interrupt_pin := config.get(CONF_INTERRUPT_PIN):
+        cg.add(var.set_interrupt_pin(await cg.gpio_pin_expression(interrupt_pin)))
+    if reset_pin := config.get(CONF_RESET_PIN):
+        cg.add(var.set_reset_pin(await cg.gpio_pin_expression(reset_pin)))

esphome/components/axs15231/touchscreen/axs15231_touchscreen.cpp

@@ -0,0 +1,64 @@
+#include "axs15231_touchscreen.h"
+
+#include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace axs15231 {
+
+static const char *const TAG = "ax15231.touchscreen";
+
+constexpr static const uint8_t AXS_READ_TOUCHPAD[11] = {0xb5, 0xab, 0xa5, 0x5a, 0x0, 0x0, 0x0, 0x8};
+
+#define ERROR_CHECK(err) \
+  if ((err) != i2c::ERROR_OK) { \
+    this->status_set_warning("Failed to communicate"); \
+    return; \
+  }
+
+void AXS15231Touchscreen::setup() {
+  ESP_LOGCONFIG(TAG, "Setting up AXS15231 Touchscreen...");
+  if (this->reset_pin_ != nullptr) {
+    this->reset_pin_->setup();
+    this->reset_pin_->digital_write(false);
+    delay(5);
+    this->reset_pin_->digital_write(true);
+    delay(10);
+  }
+  if (this->interrupt_pin_ != nullptr) {
+    this->interrupt_pin_->pin_mode(gpio::FLAG_INPUT);
+    this->interrupt_pin_->setup();
+    this->attach_interrupt_(this->interrupt_pin_, gpio::INTERRUPT_FALLING_EDGE);
+  }
+  this->x_raw_max_ = this->display_->get_native_width();
+  this->y_raw_max_ = this->display_->get_native_height();
+  ESP_LOGCONFIG(TAG, "AXS15231 Touchscreen setup complete");
+}
+
+void AXS15231Touchscreen::update_touches() {
+  i2c::ErrorCode err;
+  uint8_t data[8]{};
+
+  err = this->write(AXS_READ_TOUCHPAD, sizeof(AXS_READ_TOUCHPAD), false);
+  ERROR_CHECK(err);
+  err = this->read(data, sizeof(data));
+  ERROR_CHECK(err);
+  this->status_clear_warning();
+  if (data[0] != 0)  // no touches
+    return;
+  uint16_t x = encode_uint16(data[2] & 0xF, data[3]);
+  uint16_t y = encode_uint16(data[4] & 0xF, data[5]);
+  this->add_raw_touch_position_(0, x, y);
+}
+
+void AXS15231Touchscreen::dump_config() {
+  ESP_LOGCONFIG(TAG, "AXS15231 Touchscreen:");
+  LOG_I2C_DEVICE(this);
+  LOG_PIN("  Interrupt Pin: ", this->interrupt_pin_);
+  LOG_PIN("  Reset Pin: ", this->reset_pin_);
+  ESP_LOGCONFIG(TAG, "  Width: %d", this->x_raw_max_);
+  ESP_LOGCONFIG(TAG, "  Height: %d", this->y_raw_max_);
+}
+
+}  // namespace axs15231
+}  // namespace esphome

esphome/components/axs15231/touchscreen/axs15231_touchscreen.h

@@ -0,0 +1,27 @@
+#pragma once
+
+#include "esphome/components/i2c/i2c.h"
+#include "esphome/components/touchscreen/touchscreen.h"
+#include "esphome/core/component.h"
+#include "esphome/core/hal.h"
+
+namespace esphome {
+namespace axs15231 {
+
+class AXS15231Touchscreen : public touchscreen::Touchscreen, public i2c::I2CDevice {
+ public:
+  void setup() override;
+  void dump_config() override;
+
+  void set_interrupt_pin(InternalGPIOPin *pin) { this->interrupt_pin_ = pin; }
+  void set_reset_pin(GPIOPin *pin) { this->reset_pin_ = pin; }
+
+ protected:
+  void update_touches() override;
+
+  InternalGPIOPin *interrupt_pin_{};
+  GPIOPin *reset_pin_{};
+};
+
+}  // namespace axs15231
+}  // namespace esphome

esphome/components/bang_bang/bang_bang_climate.cpp

@@ -157,8 +157,11 @@ void BangBangClimate::switch_to_action_(climate::ClimateAction action) {
     default:
       trig = nullptr;
   }
-  assert(trig != nullptr);
+  if (trig != nullptr) {
     trig->trigger();
+  } else {
+    ESP_LOGW(TAG, "trig not set - unsupported action");
+  }
   this->action = action;
   this->prev_trigger_ = trig;
   this->publish_state();

esphome/components/bedjet/bedjet_codec.cpp

@@ -13,8 +13,10 @@ float bedjet_temp_to_f(const uint8_t temp) {
 
 /** Cleans up the packet before sending. */
 BedjetPacket *BedjetCodec::clean_packet_() {
-  // So far no commands require more than 2 bytes of data.
+  // So far no commands require more than 2 bytes of data
-  assert(this->packet_.data_length <= 2);
+  if (this->packet_.data_length > 2) {
+    ESP_LOGW(TAG, "Packet may be malformed");
+  }
   for (int i = this->packet_.data_length; i < 2; i++) {
     this->packet_.data[i] = '\0';
   }

esphome/components/binary_sensor/__init__.py

@@ -25,7 +25,7 @@ from esphome.const import (
     CONF_STATE,
     CONF_TIMING,
     CONF_TRIGGER_ID,
-    CONF_WEB_SERVER_ID,
+    CONF_WEB_SERVER,
     DEVICE_CLASS_BATTERY,
     DEVICE_CLASS_BATTERY_CHARGING,
     DEVICE_CLASS_CARBON_MONOXIDE,
@@ -543,9 +543,8 @@ async def setup_binary_sensor_core_(var, config):
         mqtt_ = cg.new_Pvariable(mqtt_id, var)
         await mqtt.register_mqtt_component(mqtt_, config)
 
-    if (webserver_id := config.get(CONF_WEB_SERVER_ID)) is not None:
+    if web_server_config := config.get(CONF_WEB_SERVER):
-        web_server_ = await cg.get_variable(webserver_id)
+        await web_server.add_entity_config(var, web_server_config)
-        web_server.add_entity_to_sorting_list(web_server_, var, config)
 
 
 async def register_binary_sensor(var, config):

esphome/components/bl0906/sensor.py

@@ -145,8 +145,9 @@ FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
     ),
 )
 async def reset_energy_to_code(config, action_id, template_arg, args):
-    paren = await cg.get_variable(config[CONF_ID])
+    var = cg.new_Pvariable(action_id, template_arg)
-    return cg.new_Pvariable(action_id, template_arg, paren)
+    await cg.register_parented(var, config[CONF_ID])
+    return var
 
 
 async def to_code(config):

esphome/components/ble_presence/binary_sensor.py

@@ -41,7 +41,7 @@ CONFIG_SCHEMA = cv.All(
             cv.Optional(CONF_SERVICE_UUID): esp32_ble_tracker.bt_uuid,
             cv.Optional(CONF_IBEACON_MAJOR): cv.uint16_t,
             cv.Optional(CONF_IBEACON_MINOR): cv.uint16_t,
-            cv.Optional(CONF_IBEACON_UUID): cv.uuid,
+            cv.Optional(CONF_IBEACON_UUID): esp32_ble_tracker.bt_uuid,
             cv.Optional(CONF_TIMEOUT, default="5min"): cv.positive_time_period,
             cv.Optional(CONF_MIN_RSSI): cv.All(
                 cv.decibel, cv.int_range(min=-100, max=-30)
@@ -83,7 +83,7 @@ async def to_code(config):
             cg.add(var.set_service_uuid128(uuid128))
 
     if ibeacon_uuid := config.get(CONF_IBEACON_UUID):
-        ibeacon_uuid = esp32_ble_tracker.as_hex_array(str(ibeacon_uuid))
+        ibeacon_uuid = esp32_ble_tracker.as_reversed_hex_array(ibeacon_uuid)
         cg.add(var.set_ibeacon_uuid(ibeacon_uuid))
 
         if (ibeacon_major := config.get(CONF_IBEACON_MAJOR)) is not None:

esphome/components/ble_rssi/sensor.py

@@ -45,7 +45,7 @@ CONFIG_SCHEMA = cv.All(
             cv.Optional(CONF_SERVICE_UUID): esp32_ble_tracker.bt_uuid,
             cv.Optional(CONF_IBEACON_MAJOR): cv.uint16_t,
             cv.Optional(CONF_IBEACON_MINOR): cv.uint16_t,
-            cv.Optional(CONF_IBEACON_UUID): cv.uuid,
+            cv.Optional(CONF_IBEACON_UUID): esp32_ble_tracker.bt_uuid,
         }
     )
     .extend(esp32_ble_tracker.ESP_BLE_DEVICE_SCHEMA)
@@ -79,7 +79,7 @@ async def to_code(config):
             cg.add(var.set_service_uuid128(uuid128))
 
     if ibeacon_uuid := config.get(CONF_IBEACON_UUID):
-        ibeacon_uuid = esp32_ble_tracker.as_hex_array(str(ibeacon_uuid))
+        ibeacon_uuid = esp32_ble_tracker.as_reversed_hex_array(ibeacon_uuid)
         cg.add(var.set_ibeacon_uuid(ibeacon_uuid))
 
         if (ibeacon_major := config.get(CONF_IBEACON_MAJOR)) is not None:

esphome/components/bme68x_bsec2/__init__.py

@@ -16,7 +16,7 @@ CODEOWNERS = ["@neffs", "@kbx81"]
 
 DOMAIN = "bme68x_bsec2"
 
-BSEC2_LIBRARY_VERSION = "v1.7.2502"
+BSEC2_LIBRARY_VERSION = "v1.8.2610"
 
 CONF_ALGORITHM_OUTPUT = "algorithm_output"
 CONF_BME68X_BSEC2_ID = "bme68x_bsec2_id"

esphome/components/button/__init__.py

@@ -11,7 +11,7 @@ from esphome.const import (
     CONF_MQTT_ID,
     CONF_ON_PRESS,
     CONF_TRIGGER_ID,
-    CONF_WEB_SERVER_ID,
+    CONF_WEB_SERVER,
     DEVICE_CLASS_EMPTY,
     DEVICE_CLASS_IDENTIFY,
     DEVICE_CLASS_RESTART,
@@ -97,9 +97,8 @@ async def setup_button_core_(var, config):
         mqtt_ = cg.new_Pvariable(mqtt_id, var)
         await mqtt.register_mqtt_component(mqtt_, config)
 
-    if (webserver_id := config.get(CONF_WEB_SERVER_ID)) is not None:
+    if web_server_config := config.get(CONF_WEB_SERVER):
-        web_server_ = await cg.get_variable(webserver_id)
+        await web_server.add_entity_config(var, web_server_config)
-        web_server.add_entity_to_sorting_list(web_server_, var, config)
 
 
 async def register_button(var, config):

esphome/components/ch422g/__init__.py

@@ -1,18 +1,20 @@
 from esphome import pins
 import esphome.codegen as cg
 from esphome.components import i2c
+from esphome.components.i2c import I2CBus
 import esphome.config_validation as cv
 from esphome.const import (
+    CONF_I2C_ID,
     CONF_ID,
     CONF_INPUT,
     CONF_INVERTED,
     CONF_MODE,
     CONF_NUMBER,
+    CONF_OPEN_DRAIN,
     CONF_OUTPUT,
-    CONF_RESTORE_VALUE,
 )
 
-CODEOWNERS = ["@jesterret"]
+CODEOWNERS = ["@jesterret", "@clydebarrow"]
 DEPENDENCIES = ["i2c"]
 MULTI_CONF = True
 ch422g_ns = cg.esphome_ns.namespace("ch422g")
@@ -23,29 +25,36 @@ CH422GGPIOPin = ch422g_ns.class_(
 )
 
 CONF_CH422G = "ch422g"
-CONFIG_SCHEMA = (
+
-    cv.Schema(
+# Note that no address is configurable - each register in the CH422G has a dedicated i2c address
+CONFIG_SCHEMA = cv.Schema(
     {
-            cv.Required(CONF_ID): cv.declare_id(CH422GComponent),
+        cv.GenerateID(CONF_ID): cv.declare_id(CH422GComponent),
-            cv.Optional(CONF_RESTORE_VALUE, default=False): cv.boolean,
+        cv.GenerateID(CONF_I2C_ID): cv.use_id(I2CBus),
     }
-    )
+).extend(cv.COMPONENT_SCHEMA)
-    .extend(cv.COMPONENT_SCHEMA)
-    .extend(i2c.i2c_device_schema(0x24))
-)
 
 
 async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
-    cg.add(var.set_restore_value(config[CONF_RESTORE_VALUE]))
     await cg.register_component(var, config)
-    await i2c.register_i2c_device(var, config)
+    # Can't use register_i2c_device because there is no CONF_ADDRESS
+    parent = await cg.get_variable(config[CONF_I2C_ID])
+    cg.add(var.set_i2c_bus(parent))
+
+
+# This is used as a final validation step so that modes have been fully transformed.
+def pin_mode_check(pin_config, _):
+    if pin_config[CONF_MODE][CONF_INPUT] and pin_config[CONF_NUMBER] >= 8:
+        raise cv.Invalid("CH422G only supports input on pins 0-7")
+    if pin_config[CONF_MODE][CONF_OPEN_DRAIN] and pin_config[CONF_NUMBER] < 8:
+        raise cv.Invalid("CH422G only supports open drain output on pins 8-11")
 
 
 CH422G_PIN_SCHEMA = pins.gpio_base_schema(
     CH422GGPIOPin,
-    cv.int_range(min=0, max=7),
+    cv.int_range(min=0, max=11),
-    modes=[CONF_INPUT, CONF_OUTPUT],
+    modes=[CONF_INPUT, CONF_OUTPUT, CONF_OPEN_DRAIN],
 ).extend(
     {
         cv.Required(CONF_CH422G): cv.use_id(CH422GComponent),
@@ -53,7 +62,7 @@ CH422G_PIN_SCHEMA = pins.gpio_base_schema(
 )
 
 
-@pins.PIN_SCHEMA_REGISTRY.register(CONF_CH422G, CH422G_PIN_SCHEMA)
+@pins.PIN_SCHEMA_REGISTRY.register(CONF_CH422G, CH422G_PIN_SCHEMA, pin_mode_check)
 async def ch422g_pin_to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
     parent = await cg.get_variable(config[CONF_CH422G])

esphome/components/ch422g/ch422g.cpp

@@ -4,33 +4,33 @@
 namespace esphome {
 namespace ch422g {
 
-const uint8_t CH422G_REG_IN = 0x26;
+static const uint8_t CH422G_REG_MODE = 0x24;
-const uint8_t CH422G_REG_OUT = 0x38;
+static const uint8_t CH422G_MODE_OUTPUT = 0x01;      // enables output mode on 0-7
-const uint8_t OUT_REG_DEFAULT_VAL = 0xdf;
+static const uint8_t CH422G_MODE_OPEN_DRAIN = 0x04;  // enables open drain mode on 8-11
+static const uint8_t CH422G_REG_IN = 0x26;           // read reg for input bits
+static const uint8_t CH422G_REG_OUT = 0x38;          // write reg for output bits 0-7
+static const uint8_t CH422G_REG_OUT_UPPER = 0x23;    // write reg for output bits 8-11
 
 static const char *const TAG = "ch422g";
 
 void CH422GComponent::setup() {
   ESP_LOGCONFIG(TAG, "Setting up CH422G...");
-  // Test to see if device exists
+  // set outputs before mode
-  if (!this->read_inputs_()) {
+  this->write_outputs_();
+  // Set mode and check for errors
+  if (!this->set_mode_(this->mode_value_) || !this->read_inputs_()) {
     ESP_LOGE(TAG, "CH422G not detected at 0x%02X", this->address_);
     this->mark_failed();
     return;
   }
 
-  // restore defaults over whatever got saved on last boot
+  ESP_LOGCONFIG(TAG, "Initialization complete. Warning: %d, Error: %d", this->status_has_warning(),
-  if (!this->restore_value_) {
-    this->write_output_(OUT_REG_DEFAULT_VAL);
-  }
-
-  ESP_LOGD(TAG, "Initialization complete. Warning: %d, Error: %d", this->status_has_warning(),
                 this->status_has_error());
 }
 
 void CH422GComponent::loop() {
   // Clear all the previously read flags.
-  this->pin_read_cache_ = 0x00;
+  this->pin_read_flags_ = 0x00;
 }
 
 void CH422GComponent::dump_config() {
@@ -41,82 +41,99 @@ void CH422GComponent::dump_config() {
   }
 }
 
-// ch422g doesn't have any flag support (needs docs?)
+void CH422GComponent::pin_mode(uint8_t pin, gpio::Flags flags) {
-void CH422GComponent::pin_mode(uint8_t pin, gpio::Flags flags) {}
+  if (pin < 8) {
+    if (flags & gpio::FLAG_OUTPUT) {
+      this->mode_value_ |= CH422G_MODE_OUTPUT;
+    }
+  } else {
+    if (flags & gpio::FLAG_OPEN_DRAIN) {
+      this->mode_value_ |= CH422G_MODE_OPEN_DRAIN;
+    }
+  }
+}
 
 bool CH422GComponent::digital_read(uint8_t pin) {
-  if (this->pin_read_cache_ == 0 || this->pin_read_cache_ & (1 << pin)) {
+  if (this->pin_read_flags_ == 0 || this->pin_read_flags_ & (1 << pin)) {
     // Read values on first access or in case it's being read again in the same loop
     this->read_inputs_();
   }
 
-  this->pin_read_cache_ |= (1 << pin);
+  this->pin_read_flags_ |= (1 << pin);
-  return this->state_mask_ & (1 << pin);
+  return (this->input_bits_ & (1 << pin)) != 0;
 }
 
 void CH422GComponent::digital_write(uint8_t pin, bool value) {
   if (value) {
-    this->write_output_(this->state_mask_ | (1 << pin));
+    this->output_bits_ |= (1 << pin);
   } else {
-    this->write_output_(this->state_mask_ & ~(1 << pin));
+    this->output_bits_ &= ~(1 << pin);
   }
+  this->write_outputs_();
 }
 
 bool CH422GComponent::read_inputs_() {
   if (this->is_failed()) {
     return false;
   }
-
+  uint8_t result;
-  uint8_t temp = 0;
+  // reading inputs requires the chip to be in input mode, possibly temporarily.
-  if ((this->last_error_ = this->read(&temp, 1)) != esphome::i2c::ERROR_OK) {
+  if (this->mode_value_ & CH422G_MODE_OUTPUT) {
-    this->status_set_warning(str_sprintf("read_inputs_(): I2C I/O error: %d", (int) this->last_error_).c_str());
+    this->set_mode_(this->mode_value_ & ~CH422G_MODE_OUTPUT);
-    return false;
+    result = this->read_reg_(CH422G_REG_IN);
+    this->set_mode_(this->mode_value_);
+  } else {
+    result = this->read_reg_(CH422G_REG_IN);
   }
-
+  this->input_bits_ = result;
-  uint8_t output = 0;
-  if ((this->last_error_ = this->bus_->read(CH422G_REG_IN, &output, 1)) != esphome::i2c::ERROR_OK) {
-    this->status_set_warning(str_sprintf("read_inputs_(): I2C I/O error: %d", (int) this->last_error_).c_str());
-    return false;
-  }
-
-  this->state_mask_ = output;
-  this->status_clear_warning();
-
-  return true;
-}
-
-bool CH422GComponent::write_output_(uint8_t value) {
-  const uint8_t temp = 1;
-  if ((this->last_error_ = this->write(&temp, 1, false)) != esphome::i2c::ERROR_OK) {
-    this->status_set_warning(str_sprintf("write_output_(): I2C I/O error: %d", (int) this->last_error_).c_str());
-    return false;
-  }
-
-  uint8_t write_mask = value;
-  if ((this->last_error_ = this->bus_->write(CH422G_REG_OUT, &write_mask, 1)) != esphome::i2c::ERROR_OK) {
-    this->status_set_warning(
-        str_sprintf("write_output_(): I2C I/O error: %d for write_mask: %d", (int) this->last_error_, (int) write_mask)
-            .c_str());
-    return false;
-  }
-
-  this->state_mask_ = value;
   this->status_clear_warning();
   return true;
 }
 
+// Write a register. Can't use the standard write_byte() method because there is no single pre-configured i2c address.
+bool CH422GComponent::write_reg_(uint8_t reg, uint8_t value) {
+  auto err = this->bus_->write(reg, &value, 1);
+  if (err != i2c::ERROR_OK) {
+    this->status_set_warning(str_sprintf("write failed for register 0x%X, error %d", reg, err).c_str());
+    return false;
+  }
+  this->status_clear_warning();
+  return true;
+}
+
+uint8_t CH422GComponent::read_reg_(uint8_t reg) {
+  uint8_t value;
+  auto err = this->bus_->read(reg, &value, 1);
+  if (err != i2c::ERROR_OK) {
+    this->status_set_warning(str_sprintf("read failed for register 0x%X, error %d", reg, err).c_str());
+    return 0;
+  }
+  this->status_clear_warning();
+  return value;
+}
+
+bool CH422GComponent::set_mode_(uint8_t mode) { return this->write_reg_(CH422G_REG_MODE, mode); }
+
+bool CH422GComponent::write_outputs_() {
+  return this->write_reg_(CH422G_REG_OUT, static_cast<uint8_t>(this->output_bits_)) &&
+         this->write_reg_(CH422G_REG_OUT_UPPER, static_cast<uint8_t>(this->output_bits_ >> 8));
+}
+
 float CH422GComponent::get_setup_priority() const { return setup_priority::IO; }
 
 // Run our loop() method very early in the loop, so that we cache read values
 // before other components call our digital_read() method.
 float CH422GComponent::get_loop_priority() const { return 9.0f; }  // Just after WIFI
 
-void CH422GGPIOPin::setup() { pin_mode(flags_); }
 void CH422GGPIOPin::pin_mode(gpio::Flags flags) { this->parent_->pin_mode(this->pin_, flags); }
-bool CH422GGPIOPin::digital_read() { return this->parent_->digital_read(this->pin_) != this->inverted_; }
+bool CH422GGPIOPin::digital_read() { return this->parent_->digital_read(this->pin_) ^ this->inverted_; }
 
-void CH422GGPIOPin::digital_write(bool value) { this->parent_->digital_write(this->pin_, value != this->inverted_); }
+void CH422GGPIOPin::digital_write(bool value) { this->parent_->digital_write(this->pin_, value ^ this->inverted_); }
 std::string CH422GGPIOPin::dump_summary() const { return str_sprintf("EXIO%u via CH422G", pin_); }
+void CH422GGPIOPin::set_flags(gpio::Flags flags) {
+  flags_ = flags;
+  this->parent_->pin_mode(this->pin_, flags);
+}
 
 }  // namespace ch422g
 }  // namespace esphome

esphome/components/ch422g/ch422g.h

@@ -23,32 +23,30 @@ class CH422GComponent : public Component, public i2c::I2CDevice {
   void pin_mode(uint8_t pin, gpio::Flags flags);
 
   float get_setup_priority() const override;
-
   float get_loop_priority() const override;
-
   void dump_config() override;
 
-  void set_restore_value(bool restore_value) { this->restore_value_ = restore_value; }
-
  protected:
+  bool write_reg_(uint8_t reg, uint8_t value);
+  uint8_t read_reg_(uint8_t reg);
+  bool set_mode_(uint8_t mode);
   bool read_inputs_();
-
+  bool write_outputs_();
-  bool write_output_(uint8_t value);
 
   /// The mask to write as output state - 1 means HIGH, 0 means LOW
-  uint8_t state_mask_{0x00};
+  uint16_t output_bits_{0x00};
   /// Flags to check if read previously during this loop
-  uint8_t pin_read_cache_ = {0x00};
+  uint8_t pin_read_flags_ = {0x00};
-  /// Storage for last I2C error seen
+  /// Copy of last read values
-  esphome::i2c::ErrorCode last_error_;
+  uint8_t input_bits_ = {0x00};
-  /// Whether we want to override stored values on expander
+  /// Copy of the mode value
-  bool restore_value_{false};
+  uint8_t mode_value_{};
 };
 
-/// Helper class to expose a CH422G pin as an internal input GPIO pin.
+/// Helper class to expose a CH422G pin as a GPIO pin.
 class CH422GGPIOPin : public GPIOPin {
  public:
-  void setup() override;
+  void setup() override{};
   void pin_mode(gpio::Flags flags) override;
   bool digital_read() override;
   void digital_write(bool value) override;
@@ -57,13 +55,13 @@ class CH422GGPIOPin : public GPIOPin {
   void set_parent(CH422GComponent *parent) { parent_ = parent; }
   void set_pin(uint8_t pin) { pin_ = pin; }
   void set_inverted(bool inverted) { inverted_ = inverted; }
-  void set_flags(gpio::Flags flags) { flags_ = flags; }
+  void set_flags(gpio::Flags flags);
 
  protected:
-  CH422GComponent *parent_;
+  CH422GComponent *parent_{};
-  uint8_t pin_;
+  uint8_t pin_{};
-  bool inverted_;
+  bool inverted_{};
-  gpio::Flags flags_;
+  gpio::Flags flags_{};
 };
 
 }  // namespace ch422g

esphome/components/climate/__init__.py

@@ -43,7 +43,7 @@ from esphome.const import (
     CONF_TEMPERATURE_STEP,
     CONF_TRIGGER_ID,
     CONF_VISUAL,
-    CONF_WEB_SERVER_ID,
+    CONF_WEB_SERVER,
 )
 from esphome.core import CORE, coroutine_with_priority
 from esphome.cpp_helpers import setup_entity
@@ -408,9 +408,8 @@ async def setup_climate_core_(var, config):
             trigger, [(ClimateCall.operator("ref"), "x")], conf
         )
 
-    if (webserver_id := config.get(CONF_WEB_SERVER_ID)) is not None:
+    if web_server_config := config.get(CONF_WEB_SERVER):
-        web_server_ = await cg.get_variable(webserver_id)
+        await web_server.add_entity_config(var, web_server_config)
-        web_server.add_entity_to_sorting_list(web_server_, var, config)
 
 
 async def register_climate(var, config):

esphome/components/cover/__init__.py

@@ -17,7 +17,7 @@ from esphome.const import (
     CONF_TILT_COMMAND_TOPIC,
     CONF_TILT_STATE_TOPIC,
     CONF_TRIGGER_ID,
-    CONF_WEB_SERVER_ID,
+    CONF_WEB_SERVER,
     DEVICE_CLASS_AWNING,
     DEVICE_CLASS_BLIND,
     DEVICE_CLASS_CURTAIN,
@@ -137,10 +137,6 @@ async def setup_cover_core_(var, config):
         trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
         await automation.build_automation(trigger, [], conf)
 
-    if (webserver_id := config.get(CONF_WEB_SERVER_ID)) is not None:
-        web_server_ = await cg.get_variable(webserver_id)
-        web_server.add_entity_to_sorting_list(web_server_, var, config)
-
     if (mqtt_id := config.get(CONF_MQTT_ID)) is not None:
         mqtt_ = cg.new_Pvariable(mqtt_id, var)
         await mqtt.register_mqtt_component(mqtt_, config)
@@ -156,6 +152,9 @@ async def setup_cover_core_(var, config):
         if (tilt_command_topic := config.get(CONF_TILT_COMMAND_TOPIC)) is not None:
             cg.add(mqtt_.set_custom_tilt_command_topic(tilt_command_topic))
 
+    if web_server_config := config.get(CONF_WEB_SERVER):
+        await web_server.add_entity_config(var, web_server_config)
+
 
 async def register_cover(var, config):
     if not CORE.has_id(config[CONF_ID]):

esphome/components/cse7766/cse7766.cpp

@@ -147,6 +147,7 @@ void CSE7766Component::parse_data_() {
   float power = 0.0f;
   if (power_cycle_exceeds_range) {
     // Datasheet: power cycle exceeding range means active power is 0
+    have_power = true;
     if (this->power_sensor_ != nullptr) {
       this->power_sensor_->publish_state(0.0f);
     }
@@ -178,6 +179,15 @@ void CSE7766Component::parse_data_() {
     if (this->apparent_power_sensor_ != nullptr) {
       this->apparent_power_sensor_->publish_state(apparent_power);
     }
+    if (have_power && this->reactive_power_sensor_ != nullptr) {
+      const float reactive_power = apparent_power - power;
+      if (reactive_power < 0.0f) {
+        ESP_LOGD(TAG, "Impossible reactive power: %.4f is negative", reactive_power);
+        this->reactive_power_sensor_->publish_state(0.0f);
+      } else {
+        this->reactive_power_sensor_->publish_state(reactive_power);
+      }
+    }
     if (this->power_factor_sensor_ != nullptr && (have_power || power_cycle_exceeds_range)) {
       float pf = NAN;
       if (apparent_power > 0) {
@@ -232,8 +242,9 @@ void CSE7766Component::dump_config() {
   LOG_SENSOR("  ", "Power", this->power_sensor_);
   LOG_SENSOR("  ", "Energy", this->energy_sensor_);
   LOG_SENSOR("  ", "Apparent Power", this->apparent_power_sensor_);
+  LOG_SENSOR("  ", "Reactive Power", this->reactive_power_sensor_);
   LOG_SENSOR("  ", "Power Factor", this->power_factor_sensor_);
-  this->check_uart_settings(4800);
+  this->check_uart_settings(4800, 1, uart::UART_CONFIG_PARITY_EVEN);
 }
 
 }  // namespace cse7766

esphome/components/cse7766/cse7766.h

@@ -16,6 +16,9 @@ class CSE7766Component : public Component, public uart::UARTDevice {
   void set_apparent_power_sensor(sensor::Sensor *apparent_power_sensor) {
     apparent_power_sensor_ = apparent_power_sensor;
   }
+  void set_reactive_power_sensor(sensor::Sensor *reactive_power_sensor) {
+    reactive_power_sensor_ = reactive_power_sensor;
+  }
   void set_power_factor_sensor(sensor::Sensor *power_factor_sensor) { power_factor_sensor_ = power_factor_sensor; }
 
   void loop() override;
@@ -35,6 +38,7 @@ class CSE7766Component : public Component, public uart::UARTDevice {
   sensor::Sensor *power_sensor_{nullptr};
   sensor::Sensor *energy_sensor_{nullptr};
   sensor::Sensor *apparent_power_sensor_{nullptr};
+  sensor::Sensor *reactive_power_sensor_{nullptr};
   sensor::Sensor *power_factor_sensor_{nullptr};
   uint32_t cf_pulses_total_{0};
   uint16_t cf_pulses_last_{0};

esphome/components/cse7766/sensor.py

@@ -8,18 +8,21 @@ from esphome.const import (
     CONF_ID,
     CONF_POWER,
     CONF_POWER_FACTOR,
+    CONF_REACTIVE_POWER,
     CONF_VOLTAGE,
     DEVICE_CLASS_APPARENT_POWER,
     DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_ENERGY,
     DEVICE_CLASS_POWER,
     DEVICE_CLASS_POWER_FACTOR,
+    DEVICE_CLASS_REACTIVE_POWER,
     DEVICE_CLASS_VOLTAGE,
     STATE_CLASS_MEASUREMENT,
     STATE_CLASS_TOTAL_INCREASING,
     UNIT_AMPERE,
     UNIT_VOLT,
     UNIT_VOLT_AMPS,
+    UNIT_VOLT_AMPS_REACTIVE,
     UNIT_WATT,
     UNIT_WATT_HOURS,
 )
@@ -62,6 +65,12 @@ CONFIG_SCHEMA = cv.Schema(
             device_class=DEVICE_CLASS_APPARENT_POWER,
             state_class=STATE_CLASS_MEASUREMENT,
         ),
+        cv.Optional(CONF_REACTIVE_POWER): sensor.sensor_schema(
+            unit_of_measurement=UNIT_VOLT_AMPS_REACTIVE,
+            accuracy_decimals=1,
+            device_class=DEVICE_CLASS_REACTIVE_POWER,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ),
         cv.Optional(CONF_POWER_FACTOR): sensor.sensor_schema(
             accuracy_decimals=2,
             device_class=DEVICE_CLASS_POWER_FACTOR,
@@ -70,7 +79,7 @@ CONFIG_SCHEMA = cv.Schema(
     }
 ).extend(uart.UART_DEVICE_SCHEMA)
 FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
-    "cse7766", baud_rate=4800, require_rx=True
+    "cse7766", baud_rate=4800, parity="EVEN", require_rx=True
 )
 
 
@@ -94,6 +103,9 @@ async def to_code(config):
     if apparent_power_config := config.get(CONF_APPARENT_POWER):
         sens = await sensor.new_sensor(apparent_power_config)
         cg.add(var.set_apparent_power_sensor(sens))
+    if reactive_power_config := config.get(CONF_REACTIVE_POWER):
+        sens = await sensor.new_sensor(reactive_power_config)
+        cg.add(var.set_reactive_power_sensor(sens))
     if power_factor_config := config.get(CONF_POWER_FACTOR):
         sens = await sensor.new_sensor(power_factor_config)
         cg.add(var.set_power_factor_sensor(sens))

esphome/components/cst816/touchscreen/__init__.py

@@ -1,11 +1,10 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
-
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import i2c, touchscreen
-from esphome.const import CONF_INTERRUPT_PIN, CONF_ID, CONF_RESET_PIN
+import esphome.config_validation as cv
-from .. import cst816_ns
+from esphome.const import CONF_ID, CONF_INTERRUPT_PIN, CONF_RESET_PIN
 
+from .. import cst816_ns
 
 CST816Touchscreen = cst816_ns.class_(
     "CST816Touchscreen",
@@ -14,11 +13,14 @@ CST816Touchscreen = cst816_ns.class_(
 )
 
 CST816ButtonListener = cst816_ns.class_("CST816ButtonListener")
+
+CONF_SKIP_PROBE = "skip_probe"
 CONFIG_SCHEMA = touchscreen.TOUCHSCREEN_SCHEMA.extend(
     {
         cv.GenerateID(): cv.declare_id(CST816Touchscreen),
         cv.Optional(CONF_INTERRUPT_PIN): pins.internal_gpio_input_pin_schema,
         cv.Optional(CONF_RESET_PIN): pins.gpio_output_pin_schema,
+        cv.Optional(CONF_SKIP_PROBE, default=False): cv.boolean,
     }
 ).extend(i2c.i2c_device_schema(0x15))
 
@@ -28,6 +30,7 @@ async def to_code(config):
     await touchscreen.register_touchscreen(var, config)
     await i2c.register_i2c_device(var, config)
 
+    cg.add(var.set_skip_probe(config[CONF_SKIP_PROBE]))
     if interrupt_pin := config.get(CONF_INTERRUPT_PIN):
         cg.add(var.set_interrupt_pin(await cg.gpio_pin_expression(interrupt_pin)))
     if reset_pin := config.get(CONF_RESET_PIN):

esphome/components/cst816/touchscreen/cst816_touchscreen.cpp

@@ -8,11 +8,7 @@ void CST816Touchscreen::continue_setup_() {
     this->interrupt_pin_->setup();
     this->attach_interrupt_(this->interrupt_pin_, gpio::INTERRUPT_FALLING_EDGE);
   }
-  if (!this->read_byte(REG_CHIP_ID, &this->chip_id_)) {
+  if (this->read_byte(REG_CHIP_ID, &this->chip_id_)) {
-    this->mark_failed();
-    esph_log_e(TAG, "Failed to read chip id");
-    return;
-  }
     switch (this->chip_id_) {
       case CST820_CHIP_ID:
       case CST826_CHIP_ID:
@@ -23,17 +19,22 @@ void CST816Touchscreen::continue_setup_() {
         break;
       default:
         this->mark_failed();
-      esph_log_e(TAG, "Unknown chip ID 0x%02X", this->chip_id_);
+        this->status_set_error(str_sprintf("Unknown chip ID 0x%02X", this->chip_id_).c_str());
         return;
     }
     this->write_byte(REG_IRQ_CTL, IRQ_EN_MOTION);
+  } else if (!this->skip_probe_) {
+    this->status_set_error("Failed to read chip id");
+    this->mark_failed();
+    return;
+  }
   if (this->x_raw_max_ == this->x_raw_min_) {
     this->x_raw_max_ = this->display_->get_native_width();
   }
   if (this->y_raw_max_ == this->y_raw_min_) {
     this->y_raw_max_ = this->display_->get_native_height();
   }
-  esph_log_config(TAG, "CST816 Touchscreen setup complete");
+  ESP_LOGCONFIG(TAG, "CST816 Touchscreen setup complete");
 }
 
 void CST816Touchscreen::update_button_state_(bool state) {
@@ -45,7 +46,7 @@ void CST816Touchscreen::update_button_state_(bool state) {
 }
 
 void CST816Touchscreen::setup() {
-  esph_log_config(TAG, "Setting up CST816 Touchscreen...");
+  ESP_LOGCONFIG(TAG, "Setting up CST816 Touchscreen...");
   if (this->reset_pin_ != nullptr) {
     this->reset_pin_->setup();
     this->reset_pin_->digital_write(true);
@@ -73,7 +74,7 @@ void CST816Touchscreen::update_touches() {
 
   uint16_t x = encode_uint16(data[REG_XPOS_HIGH] & 0xF, data[REG_XPOS_LOW]);
   uint16_t y = encode_uint16(data[REG_YPOS_HIGH] & 0xF, data[REG_YPOS_LOW]);
-  esph_log_v(TAG, "Read touch %d/%d", x, y);
+  ESP_LOGV(TAG, "Read touch %d/%d", x, y);
   if (x >= this->x_raw_max_) {
     this->update_button_state_(true);
   } else {

esphome/components/cst816/touchscreen/cst816_touchscreen.h

@@ -45,6 +45,7 @@ class CST816Touchscreen : public touchscreen::Touchscreen, public i2c::I2CDevice
 
   void set_interrupt_pin(InternalGPIOPin *pin) { this->interrupt_pin_ = pin; }
   void set_reset_pin(GPIOPin *pin) { this->reset_pin_ = pin; }
+  void set_skip_probe(bool skip_probe) { this->skip_probe_ = skip_probe; }
 
  protected:
   void continue_setup_();
@@ -53,6 +54,7 @@ class CST816Touchscreen : public touchscreen::Touchscreen, public i2c::I2CDevice
   InternalGPIOPin *interrupt_pin_{};
   GPIOPin *reset_pin_{};
   uint8_t chip_id_{};
+  bool skip_probe_{};  // if set, do not expect to be able to probe the controller on the i2c bus.
   std::vector<CST816ButtonListener *> button_listeners_;
   bool button_touched_{};
 };

esphome/components/datetime/__init__.py

@@ -18,7 +18,7 @@ from esphome.const import (
     CONF_TIME_ID,
     CONF_TRIGGER_ID,
     CONF_TYPE,
-    CONF_WEB_SERVER_ID,
+    CONF_WEB_SERVER,
     CONF_YEAR,
 )
 from esphome.core import CORE, coroutine_with_priority
@@ -26,7 +26,6 @@ from esphome.cpp_generator import MockObjClass
 from esphome.cpp_helpers import setup_entity
 
 CODEOWNERS = ["@rfdarter", "@jesserockz"]
-DEPENDENCIES = ["time"]
 
 IS_PLATFORM_COMPONENT = True
 
@@ -62,20 +61,28 @@ DATETIME_MODES = [
 ]
 
 
-_DATETIME_SCHEMA = (
+def _validate_time_present(config):
-    cv.ENTITY_BASE_SCHEMA.extend(web_server.WEBSERVER_SORTING_SCHEMA)
+    config = config.copy()
-    .extend(cv.MQTT_COMMAND_COMPONENT_SCHEMA)
+    if CONF_ON_TIME in config and CONF_TIME_ID not in config:
-    .extend(
+        time_id = cv.use_id(time.RealTimeClock)(None)
+        config[CONF_TIME_ID] = time_id
+    return config
+
+
+_DATETIME_SCHEMA = cv.ENTITY_BASE_SCHEMA.extend(
+    web_server.WEBSERVER_SORTING_SCHEMA,
+    cv.MQTT_COMMAND_COMPONENT_SCHEMA,
+    cv.Schema(
         {
             cv.Optional(CONF_ON_VALUE): automation.validate_automation(
                 {
                     cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(DateTimeStateTrigger),
                 }
             ),
-            cv.GenerateID(CONF_TIME_ID): cv.use_id(time.RealTimeClock),
+            cv.Optional(CONF_TIME_ID): cv.use_id(time.RealTimeClock),
         }
-    )
+    ),
-)
+).add_extra(_validate_time_present)
 
 
 def date_schema(class_: MockObjClass) -> cv.Schema:
@@ -131,13 +138,13 @@ async def setup_datetime_core_(var, config):
     if (mqtt_id := config.get(CONF_MQTT_ID)) is not None:
         mqtt_ = cg.new_Pvariable(mqtt_id, var)
         await mqtt.register_mqtt_component(mqtt_, config)
-    if (webserver_id := config.get(CONF_WEB_SERVER_ID)) is not None:
+    if web_server_config := config.get(CONF_WEB_SERVER):
-        web_server_ = await cg.get_variable(webserver_id)
+        await web_server.add_entity_config(var, web_server_config)
-        web_server.add_entity_to_sorting_list(web_server_, var, config)
     for conf in config.get(CONF_ON_VALUE, []):
         trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
         await automation.build_automation(trigger, [(cg.ESPTime, "x")], conf)
 
+    if CONF_TIME_ID in config:
         rtc = await cg.get_variable(config[CONF_TIME_ID])
         cg.add(var.set_rtc(rtc))
 

esphome/components/datetime/datetime_base.h

@@ -4,8 +4,9 @@
 #include "esphome/core/component.h"
 #include "esphome/core/entity_base.h"
 #include "esphome/core/time.h"
-
+#ifdef USE_TIME
 #include "esphome/components/time/real_time_clock.h"
+#endif
 
 namespace esphome {
 namespace datetime {
@@ -19,23 +20,29 @@ class DateTimeBase : public EntityBase {
 
   void add_on_state_callback(std::function<void()> &&callback) { this->state_callback_.add(std::move(callback)); }
 
+#ifdef USE_TIME
   void set_rtc(time::RealTimeClock *rtc) { this->rtc_ = rtc; }
   time::RealTimeClock *get_rtc() const { return this->rtc_; }
+#endif
 
  protected:
   CallbackManager<void()> state_callback_;
 
+#ifdef USE_TIME
   time::RealTimeClock *rtc_;
+#endif
 
   bool has_state_{false};
 };
 
+#ifdef USE_TIME
 class DateTimeStateTrigger : public Trigger<ESPTime> {
  public:
   explicit DateTimeStateTrigger(DateTimeBase *parent) {
     parent->add_on_state_callback([this, parent]() { this->trigger(parent->state_as_esptime()); });
   }
 };
+#endif
 
 }  // namespace datetime
 }  // namespace esphome

esphome/components/datetime/datetime_entity.cpp

@@ -192,6 +192,7 @@ void DateTimeEntityRestoreState::apply(DateTimeEntity *time) {
   time->publish_state();
 }
 
+#ifdef USE_TIME
 static const int MAX_TIMESTAMP_DRIFT = 900;  // how far can the clock drift before we consider
                                              // there has been a drastic time synchronization
 
@@ -245,6 +246,7 @@ bool OnDateTimeTrigger::matches_(const ESPTime &time) const {
          time.day_of_month == this->parent_->day && time.hour == this->parent_->hour &&
          time.minute == this->parent_->minute && time.second == this->parent_->second;
 }
+#endif
 
 }  // namespace datetime
 }  // namespace esphome

esphome/components/datetime/datetime_entity.h

@@ -134,6 +134,7 @@ template<typename... Ts> class DateTimeSetAction : public Action<Ts...>, public
   }
 };
 
+#ifdef USE_TIME
 class OnDateTimeTrigger : public Trigger<>, public Component, public Parented<DateTimeEntity> {
  public:
   void loop() override;
@@ -143,6 +144,7 @@ class OnDateTimeTrigger : public Trigger<>, public Component, public Parented<Da
 
   optional<ESPTime> last_check_;
 };
+#endif
 
 }  // namespace datetime
 }  // namespace esphome

esphome/components/datetime/time_entity.cpp

@@ -94,6 +94,7 @@ void TimeEntityRestoreState::apply(TimeEntity *time) {
   time->publish_state();
 }
 
+#ifdef USE_TIME
 static const int MAX_TIMESTAMP_DRIFT = 900;  // how far can the clock drift before we consider
                                              // there has been a drastic time synchronization
 
@@ -145,6 +146,7 @@ bool OnTimeTrigger::matches_(const ESPTime &time) const {
   return time.is_valid() && time.hour == this->parent_->hour && time.minute == this->parent_->minute &&
          time.second == this->parent_->second;
 }
+#endif
 
 }  // namespace datetime
 }  // namespace esphome

esphome/components/datetime/time_entity.h

@@ -113,6 +113,7 @@ template<typename... Ts> class TimeSetAction : public Action<Ts...>, public Pare
   }
 };
 
+#ifdef USE_TIME
 class OnTimeTrigger : public Trigger<>, public Component, public Parented<TimeEntity> {
  public:
   void loop() override;
@@ -122,6 +123,7 @@ class OnTimeTrigger : public Trigger<>, public Component, public Parented<TimeEn
 
   optional<ESPTime> last_check_;
 };
+#endif
 
 }  // namespace datetime
 }  // namespace esphome

esphome/components/debug/debug_esp32.cpp

@@ -36,7 +36,8 @@ std::string DebugComponent::get_reset_reason_() {
       break;
 #if defined(USE_ESP32_VARIANT_ESP32)
     case SW_RESET:
-#elif defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3)
+#elif defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S2) || \
+    defined(USE_ESP32_VARIANT_ESP32S3) || defined(USE_ESP32_VARIANT_ESP32C6)
     case RTC_SW_SYS_RESET:
 #endif
       reset_reason = "Software Reset Digital Core";
@@ -72,14 +73,16 @@ std::string DebugComponent::get_reset_reason_() {
     case TGWDT_CPU_RESET:
       reset_reason = "Timer Group Reset CPU";
       break;
-#elif defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3)
+#elif defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S2) || \
+    defined(USE_ESP32_VARIANT_ESP32S3) || defined(USE_ESP32_VARIANT_ESP32C6)
     case TG0WDT_CPU_RESET:
       reset_reason = "Timer Group 0 Reset CPU";
       break;
 #endif
 #if defined(USE_ESP32_VARIANT_ESP32)
     case SW_CPU_RESET:
-#elif defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3)
+#elif defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S2) || \
+    defined(USE_ESP32_VARIANT_ESP32S3) || defined(USE_ESP32_VARIANT_ESP32C6)
     case RTC_SW_CPU_RESET:
 #endif
       reset_reason = "Software Reset CPU";
@@ -98,27 +101,32 @@ std::string DebugComponent::get_reset_reason_() {
     case RTCWDT_RTC_RESET:
       reset_reason = "RTC Watch Dog Reset Digital Core And RTC Module";
       break;
-#if defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3)
+#if defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3) || \
+    defined(USE_ESP32_VARIANT_ESP32C6)
     case TG1WDT_CPU_RESET:
       reset_reason = "Timer Group 1 Reset CPU";
       break;
     case SUPER_WDT_RESET:
       reset_reason = "Super Watchdog Reset Digital Core And RTC Module";
       break;
-    case GLITCH_RTC_RESET:
-      reset_reason = "Glitch Reset Digital Core And RTC Module";
-      break;
     case EFUSE_RESET:
       reset_reason = "eFuse Reset Digital Core";
       break;
 #endif
-#if defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S3)
+#if defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3)
+    case GLITCH_RTC_RESET:
+      reset_reason = "Glitch Reset Digital Core And RTC Module";
+      break;
+#endif
+#if defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S3) || defined(USE_ESP32_VARIANT_ESP32C6)
     case USB_UART_CHIP_RESET:
       reset_reason = "USB UART Reset Digital Core";
       break;
     case USB_JTAG_CHIP_RESET:
       reset_reason = "USB JTAG Reset Digital Core";
       break;
+#endif
+#if defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32S3)
     case POWER_GLITCH_RESET:
       reset_reason = "Power Glitch Reset Digital Core And RTC Module";
       break;

esphome/components/display/display.cpp

@@ -156,6 +156,148 @@ void Display::filled_circle(int center_x, int center_y, int radius, Color color)
     }
   } while (dx <= 0);
 }
+void Display::filled_ring(int center_x, int center_y, int radius1, int radius2, Color color) {
+  int rmax = radius1 > radius2 ? radius1 : radius2;
+  int rmin = radius1 < radius2 ? radius1 : radius2;
+  int dxmax = -int32_t(rmax), dxmin = -int32_t(rmin);
+  int dymax = 0, dymin = 0;
+  int errmax = 2 - 2 * rmax, errmin = 2 - 2 * rmin;
+  int e2max, e2min;
+  do {
+    // 8 dots for borders
+    this->draw_pixel_at(center_x - dxmax, center_y + dymax, color);
+    this->draw_pixel_at(center_x + dxmax, center_y + dymax, color);
+    this->draw_pixel_at(center_x - dxmin, center_y + dymin, color);
+    this->draw_pixel_at(center_x + dxmin, center_y + dymin, color);
+    this->draw_pixel_at(center_x + dxmax, center_y - dymax, color);
+    this->draw_pixel_at(center_x - dxmax, center_y - dymax, color);
+    this->draw_pixel_at(center_x + dxmin, center_y - dymin, color);
+    this->draw_pixel_at(center_x - dxmin, center_y - dymin, color);
+    if (dymin < rmin) {
+      // two parts - four lines
+      int hline_width = -(dxmax - dxmin) + 1;
+      this->horizontal_line(center_x + dxmax, center_y + dymax, hline_width, color);
+      this->horizontal_line(center_x - dxmin, center_y + dymax, hline_width, color);
+      this->horizontal_line(center_x + dxmax, center_y - dymax, hline_width, color);
+      this->horizontal_line(center_x - dxmin, center_y - dymax, hline_width, color);
+    } else {
+      // one part - top and bottom
+      int hline_width = 2 * (-dxmax) + 1;
+      this->horizontal_line(center_x + dxmax, center_y + dymax, hline_width, color);
+      this->horizontal_line(center_x + dxmax, center_y - dymax, hline_width, color);
+    }
+    e2max = errmax;
+    // tune external
+    if (e2max < dymax) {
+      errmax += ++dymax * 2 + 1;
+      if (-dxmax == dymax && e2max <= dxmax) {
+        e2max = 0;
+      }
+    }
+    if (e2max > dxmax) {
+      errmax += ++dxmax * 2 + 1;
+    }
+    // tune internal
+    while (dymin < dymax && dymin < rmin) {
+      e2min = errmin;
+      if (e2min < dymin) {
+        errmin += ++dymin * 2 + 1;
+        if (-dxmin == dymin && e2min <= dxmin) {
+          e2min = 0;
+        }
+      }
+      if (e2min > dxmin) {
+        errmin += ++dxmin * 2 + 1;
+      }
+    }
+  } while (dxmax <= 0);
+}
+void Display::filled_gauge(int center_x, int center_y, int radius1, int radius2, int progress, Color color) {
+  int rmax = radius1 > radius2 ? radius1 : radius2;
+  int rmin = radius1 < radius2 ? radius1 : radius2;
+  int dxmax = -int32_t(rmax), dxmin = -int32_t(rmin), upd_dxmax, upd_dxmin;
+  int dymax = 0, dymin = 0;
+  int errmax = 2 - 2 * rmax, errmin = 2 - 2 * rmin;
+  int e2max, e2min;
+  progress = std::max(0, std::min(progress, 100));  // 0..100
+  int draw_progress = progress > 50 ? (100 - progress) : progress;
+  float tan_a = (progress == 50) ? 65535 : tan(float(draw_progress) * M_PI / 100);  // slope
+
+  do {
+    // outer dots
+    this->draw_pixel_at(center_x + dxmax, center_y - dymax, color);
+    this->draw_pixel_at(center_x - dxmax, center_y - dymax, color);
+    if (dymin < rmin) {  // side parts
+      int lhline_width = -(dxmax - dxmin) + 1;
+      if (progress >= 50) {
+        if (float(dymax) < float(-dxmax) * tan_a) {
+          upd_dxmax = ceil(float(dymax) / tan_a);
+        } else {
+          upd_dxmax = -dxmax;
+        }
+        this->horizontal_line(center_x + dxmax, center_y - dymax, lhline_width, color);  // left
+        if (!dymax)
+          this->horizontal_line(center_x - dxmin, center_y, lhline_width, color);  // right horizontal border
+        if (upd_dxmax > -dxmin) {                                                  // right
+          int rhline_width = (upd_dxmax + dxmin) + 1;
+          this->horizontal_line(center_x - dxmin, center_y - dymax,
+                                rhline_width > lhline_width ? lhline_width : rhline_width, color);
+        }
+      } else {
+        if (float(dymin) > float(-dxmin) * tan_a) {
+          upd_dxmin = ceil(float(dymin) / tan_a);
+        } else {
+          upd_dxmin = -dxmin;
+        }
+        lhline_width = -(dxmax + upd_dxmin) + 1;
+        if (!dymax)
+          this->horizontal_line(center_x - dxmin, center_y, lhline_width, color);  // right horizontal border
+        if (lhline_width > 0)
+          this->horizontal_line(center_x + dxmax, center_y - dymax, lhline_width, color);
+      }
+    } else {  // top part
+      int hline_width = 2 * (-dxmax) + 1;
+      if (progress >= 50) {
+        if (dymax < float(-dxmax) * tan_a) {
+          upd_dxmax = ceil(float(dymax) / tan_a);
+          hline_width = -dxmax + upd_dxmax + 1;
+        }
+      } else {
+        if (dymax < float(-dxmax) * tan_a) {
+          upd_dxmax = ceil(float(dymax) / tan_a);
+          hline_width = -dxmax - upd_dxmax + 1;
+        } else
+          hline_width = 0;
+      }
+      if (hline_width > 0)
+        this->horizontal_line(center_x + dxmax, center_y - dymax, hline_width, color);
+    }
+    e2max = errmax;
+    if (e2max < dymax) {
+      errmax += ++dymax * 2 + 1;
+      if (-dxmax == dymax && e2max <= dxmax) {
+        e2max = 0;
+      }
+    }
+    if (e2max > dxmax) {
+      errmax += ++dxmax * 2 + 1;
+    }
+    while (dymin <= dymax && dymin <= rmin && dxmin <= 0) {
+      this->draw_pixel_at(center_x + dxmin, center_y - dymin, color);
+      this->draw_pixel_at(center_x - dxmin, center_y - dymin, color);
+      e2min = errmin;
+      if (e2min < dymin) {
+        errmin += ++dymin * 2 + 1;
+        if (-dxmin == dymin && e2min <= dxmin) {
+          e2min = 0;
+        }
+      }
+      if (e2min > dxmin) {
+        errmin += ++dxmin * 2 + 1;
+      }
+    }
+  } while (dxmax <= 0);
+}
 void HOT Display::triangle(int x1, int y1, int x2, int y2, int x3, int y3, Color color) {
   this->line(x1, y1, x2, y2, color);
   this->line(x1, y1, x3, y3, color);

esphome/components/display/display.h

@@ -285,6 +285,13 @@ class Display : public PollingComponent {
   /// Fill a circle centered around [center_x,center_y] with the radius radius with the given color.
   void filled_circle(int center_x, int center_y, int radius, Color color = COLOR_ON);
 
+  /// Fill a ring centered around [center_x,center_y] between two circles with the radius1 and radius2 with the given
+  /// color.
+  void filled_ring(int center_x, int center_y, int radius1, int radius2, Color color = COLOR_ON);
+  /// Fill a half-ring "gauge" centered around [center_x,center_y] between two circles with the radius1 and radius2
+  /// with he given color and filled up to 'progress' percent
+  void filled_gauge(int center_x, int center_y, int radius1, int radius2, int progress, Color color = COLOR_ON);
+
   /// Draw the outline of a triangle contained between the points [x1,y1], [x2,y2] and [x3,y3] with the given color.
   void triangle(int x1, int y1, int x2, int y2, int x3, int y3, Color color = COLOR_ON);
 

esphome/components/esp32/__init__.py

@@ -13,6 +13,7 @@ from esphome.const import (
     CONF_COMPONENTS,
     CONF_ESPHOME,
     CONF_FRAMEWORK,
+    CONF_IGNORE_EFUSE_CUSTOM_MAC,
     CONF_IGNORE_EFUSE_MAC_CRC,
     CONF_NAME,
     CONF_PATH,
@@ -52,6 +53,7 @@ from .const import (  # noqa
     KEY_SDKCONFIG_OPTIONS,
     KEY_SUBMODULES,
     KEY_VARIANT,
+    VARIANT_ESP32,
     VARIANT_FRIENDLY,
     VARIANTS,
 )
@@ -239,7 +241,7 @@ ARDUINO_PLATFORM_VERSION = cv.Version(5, 4, 0)
 # The default/recommended esp-idf framework version
 #  - https://github.com/espressif/esp-idf/releases
 #  - https://api.registry.platformio.org/v3/packages/platformio/tool/framework-espidf
-RECOMMENDED_ESP_IDF_FRAMEWORK_VERSION = cv.Version(4, 4, 7)
+RECOMMENDED_ESP_IDF_FRAMEWORK_VERSION = cv.Version(4, 4, 8)
 # The platformio/espressif32 version to use for esp-idf frameworks
 #  - https://github.com/platformio/platform-espressif32/releases
 #  - https://api.registry.platformio.org/v3/packages/platformio/platform/espressif32
@@ -375,6 +377,15 @@ def final_validate(config):
             f"Please specify {CONF_FLASH_SIZE} within esp32 configuration only"
         )
 
+    if (
+        config[CONF_VARIANT] != VARIANT_ESP32
+        and CONF_ADVANCED in (conf_fw := config[CONF_FRAMEWORK])
+        and CONF_IGNORE_EFUSE_MAC_CRC in conf_fw[CONF_ADVANCED]
+    ):
+        raise cv.Invalid(
+            f"{CONF_IGNORE_EFUSE_MAC_CRC} is not supported on {config[CONF_VARIANT]}"
+        )
+
     return config
 
 
@@ -401,7 +412,10 @@ ESP_IDF_FRAMEWORK_SCHEMA = cv.All(
             },
             cv.Optional(CONF_ADVANCED, default={}): cv.Schema(
                 {
-                    cv.Optional(CONF_IGNORE_EFUSE_MAC_CRC, default=False): cv.boolean,
+                    cv.Optional(
+                        CONF_IGNORE_EFUSE_CUSTOM_MAC, default=False
+                    ): cv.boolean,
+                    cv.Optional(CONF_IGNORE_EFUSE_MAC_CRC): cv.boolean,
                 }
             ),
             cv.Optional(CONF_COMPONENTS, default=[]): cv.ensure_list(
@@ -526,8 +540,10 @@ async def to_code(config):
         for name, value in conf[CONF_SDKCONFIG_OPTIONS].items():
             add_idf_sdkconfig_option(name, RawSdkconfigValue(value))
 
-        if conf[CONF_ADVANCED][CONF_IGNORE_EFUSE_MAC_CRC]:
+        if conf[CONF_ADVANCED][CONF_IGNORE_EFUSE_CUSTOM_MAC]:
-            cg.add_define("USE_ESP32_IGNORE_EFUSE_MAC_CRC")
+            cg.add_define("USE_ESP32_IGNORE_EFUSE_CUSTOM_MAC")
+        if conf[CONF_ADVANCED].get(CONF_IGNORE_EFUSE_MAC_CRC):
+            add_idf_sdkconfig_option("CONFIG_ESP_MAC_IGNORE_MAC_CRC_ERROR", True)
             if (framework_ver.major, framework_ver.minor) >= (4, 4):
                 add_idf_sdkconfig_option(
                     "CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE", False

esphome/components/esp32_ble/ble_uuid.cpp

@@ -31,6 +31,13 @@ ESPBTUUID ESPBTUUID::from_raw(const uint8_t *data) {
   memcpy(ret.uuid_.uuid.uuid128, data, ESP_UUID_LEN_128);
   return ret;
 }
+ESPBTUUID ESPBTUUID::from_raw_reversed(const uint8_t *data) {
+  ESPBTUUID ret;
+  ret.uuid_.len = ESP_UUID_LEN_128;
+  for (int i = 0; i < ESP_UUID_LEN_128; i++)
+    ret.uuid_.uuid.uuid128[ESP_UUID_LEN_128 - 1 - i] = data[i];
+  return ret;
+}
 ESPBTUUID ESPBTUUID::from_raw(const std::string &data) {
   ESPBTUUID ret;
   if (data.length() == 4) {

esphome/components/esp32_ble/ble_uuid.h

@@ -20,6 +20,7 @@ class ESPBTUUID {
   static ESPBTUUID from_uint32(uint32_t uuid);
 
   static ESPBTUUID from_raw(const uint8_t *data);
+  static ESPBTUUID from_raw_reversed(const uint8_t *data);
 
   static ESPBTUUID from_raw(const std::string &data);
 

esphome/components/esp32_ble/const_esp32c6.h

@@ -40,6 +40,9 @@ static const esp_bt_controller_config_t BT_CONTROLLER_CONFIG = {
     .controller_run_cpu = 0,
     .enable_qa_test = RUN_QA_TEST,
     .enable_bqb_test = RUN_BQB_TEST,
+#if ESP_IDF_VERSION < ESP_IDF_VERSION_VAL(5, 3, 1)
+    // The following fields have been removed since ESP IDF version 5.3.1, see commit:
+    // https://github.com/espressif/esp-idf/commit/e761c1de8f9c0777829d597b4d5a33bb070a30a8
     .enable_uart_hci = HCI_UART_EN,
     .ble_hci_uart_port = DEFAULT_BT_LE_HCI_UART_PORT,
     .ble_hci_uart_baud = DEFAULT_BT_LE_HCI_UART_BAUD,
@@ -47,6 +50,7 @@ static const esp_bt_controller_config_t BT_CONTROLLER_CONFIG = {
     .ble_hci_uart_stop_bits = DEFAULT_BT_LE_HCI_UART_STOP_BITS,
     .ble_hci_uart_flow_ctrl = DEFAULT_BT_LE_HCI_UART_FLOW_CTRL,
     .ble_hci_uart_uart_parity = DEFAULT_BT_LE_HCI_UART_PARITY,
+#endif
     .enable_tx_cca = DEFAULT_BT_LE_TX_CCA_ENABLED,
     .cca_rssi_thresh = 256 - DEFAULT_BT_LE_CCA_RSSI_THRESH,
     .sleep_en = NIMBLE_SLEEP_ENABLE,
@@ -58,6 +62,9 @@ static const esp_bt_controller_config_t BT_CONTROLLER_CONFIG = {
     .cpu_freq_mhz = CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ,
     .ignore_wl_for_direct_adv = 0,
     .enable_pcl = DEFAULT_BT_LE_POWER_CONTROL_ENABLED,
+#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 1, 3)
+    .csa2_select = DEFAULT_BT_LE_50_FEATURE_SUPPORT,
+#endif
     .config_magic = CONFIG_MAGIC,
 };
 

esphome/components/esp32_ble_tracker/esp32_ble_tracker.cpp

@@ -462,14 +462,16 @@ void ESPBTDevice::parse_scan_rst(const esp_ble_gap_cb_param_t::ble_scan_result_e
     ESP_LOGVV(TAG, "  Service UUID: %s", uuid.to_string().c_str());
   }
   for (auto &data : this->manufacturer_datas_) {
-    ESP_LOGVV(TAG, "  Manufacturer data: %s", format_hex_pretty(data.data).c_str());
+    auto ibeacon = ESPBLEiBeacon::from_manufacturer_data(data);
-    if (this->get_ibeacon().has_value()) {
+    if (ibeacon.has_value()) {
-      auto ibeacon = this->get_ibeacon().value();
+      ESP_LOGVV(TAG, "  Manufacturer iBeacon:");
-      ESP_LOGVV(TAG, "    iBeacon data:");
+      ESP_LOGVV(TAG, "    UUID: %s", ibeacon.value().get_uuid().to_string().c_str());
-      ESP_LOGVV(TAG, "      UUID: %s", ibeacon.get_uuid().to_string().c_str());
+      ESP_LOGVV(TAG, "    Major: %u", ibeacon.value().get_major());
-      ESP_LOGVV(TAG, "      Major: %u", ibeacon.get_major());
+      ESP_LOGVV(TAG, "    Minor: %u", ibeacon.value().get_minor());
-      ESP_LOGVV(TAG, "      Minor: %u", ibeacon.get_minor());
+      ESP_LOGVV(TAG, "    TXPower: %d", ibeacon.value().get_signal_power());
-      ESP_LOGVV(TAG, "      TXPower: %d", ibeacon.get_signal_power());
+    } else {
+      ESP_LOGVV(TAG, "  Manufacturer ID: %s, data: %s", data.uuid.to_string().c_str(),
+                format_hex_pretty(data.data).c_str());
     }
   }
   for (auto &data : this->service_datas_) {

esphome/components/esp32_ble_tracker/esp32_ble_tracker.h

@@ -44,10 +44,10 @@ class ESPBLEiBeacon {
   ESPBLEiBeacon(const uint8_t *data);
   static optional<ESPBLEiBeacon> from_manufacturer_data(const ServiceData &data);
 
-  uint16_t get_major() { return ((this->beacon_data_.major & 0xFF) << 8) | (this->beacon_data_.major >> 8); }
+  uint16_t get_major() { return byteswap(this->beacon_data_.major); }
-  uint16_t get_minor() { return ((this->beacon_data_.minor & 0xFF) << 8) | (this->beacon_data_.minor >> 8); }
+  uint16_t get_minor() { return byteswap(this->beacon_data_.minor); }
   int8_t get_signal_power() { return this->beacon_data_.signal_power; }
-  ESPBTUUID get_uuid() { return ESPBTUUID::from_raw(this->beacon_data_.proximity_uuid); }
+  ESPBTUUID get_uuid() { return ESPBTUUID::from_raw_reversed(this->beacon_data_.proximity_uuid); }
 
  protected:
   struct {

esphome/components/esp32_improv/__init__.py

@@ -1,7 +1,8 @@
+from esphome import automation
 import esphome.codegen as cg
 from esphome.components import binary_sensor, esp32_ble_server, output
 import esphome.config_validation as cv
-from esphome.const import CONF_ID
+from esphome.const import CONF_ID, CONF_ON_STATE, CONF_TRIGGER_ID
 
 AUTO_LOAD = ["esp32_ble_server"]
 CODEOWNERS = ["@jesserockz"]
@@ -11,13 +12,36 @@ CONF_AUTHORIZED_DURATION = "authorized_duration"
 CONF_AUTHORIZER = "authorizer"
 CONF_BLE_SERVER_ID = "ble_server_id"
 CONF_IDENTIFY_DURATION = "identify_duration"
+CONF_ON_PROVISIONED = "on_provisioned"
+CONF_ON_PROVISIONING = "on_provisioning"
+CONF_ON_START = "on_start"
+CONF_ON_STOP = "on_stop"
 CONF_STATUS_INDICATOR = "status_indicator"
 CONF_WIFI_TIMEOUT = "wifi_timeout"
 
+improv_ns = cg.esphome_ns.namespace("improv")
+Error = improv_ns.enum("Error")
+State = improv_ns.enum("State")
+
 esp32_improv_ns = cg.esphome_ns.namespace("esp32_improv")
 ESP32ImprovComponent = esp32_improv_ns.class_(
     "ESP32ImprovComponent", cg.Component, esp32_ble_server.BLEServiceComponent
 )
+ESP32ImprovProvisionedTrigger = esp32_improv_ns.class_(
+    "ESP32ImprovProvisionedTrigger", automation.Trigger.template()
+)
+ESP32ImprovProvisioningTrigger = esp32_improv_ns.class_(
+    "ESP32ImprovProvisioningTrigger", automation.Trigger.template()
+)
+ESP32ImprovStartTrigger = esp32_improv_ns.class_(
+    "ESP32ImprovStartTrigger", automation.Trigger.template()
+)
+ESP32ImprovStateTrigger = esp32_improv_ns.class_(
+    "ESP32ImprovStateTrigger", automation.Trigger.template()
+)
+ESP32ImprovStoppedTrigger = esp32_improv_ns.class_(
+    "ESP32ImprovStoppedTrigger", automation.Trigger.template()
+)
 
 
 CONFIG_SCHEMA = cv.Schema(
@@ -37,6 +61,37 @@ CONFIG_SCHEMA = cv.Schema(
         cv.Optional(
             CONF_WIFI_TIMEOUT, default="1min"
         ): cv.positive_time_period_milliseconds,
+        cv.Optional(CONF_ON_PROVISIONED): automation.validate_automation(
+            {
+                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(
+                    ESP32ImprovProvisionedTrigger
+                ),
+            }
+        ),
+        cv.Optional(CONF_ON_PROVISIONING): automation.validate_automation(
+            {
+                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(
+                    ESP32ImprovProvisioningTrigger
+                ),
+            }
+        ),
+        cv.Optional(CONF_ON_START): automation.validate_automation(
+            {
+                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(ESP32ImprovStartTrigger),
+            }
+        ),
+        cv.Optional(CONF_ON_STATE): automation.validate_automation(
+            {
+                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(ESP32ImprovStateTrigger),
+            }
+        ),
+        cv.Optional(CONF_ON_STOP): automation.validate_automation(
+            {
+                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(
+                    ESP32ImprovStoppedTrigger
+                ),
+            }
+        ),
     }
 ).extend(cv.COMPONENT_SCHEMA)
 
@@ -63,3 +118,29 @@ async def to_code(config):
     if CONF_STATUS_INDICATOR in config:
         status_indicator = await cg.get_variable(config[CONF_STATUS_INDICATOR])
         cg.add(var.set_status_indicator(status_indicator))
+
+    use_state_callback = False
+    for conf in config.get(CONF_ON_PROVISIONED, []):
+        trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
+        await automation.build_automation(trigger, [], conf)
+        use_state_callback = True
+    for conf in config.get(CONF_ON_PROVISIONING, []):
+        trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
+        await automation.build_automation(trigger, [], conf)
+        use_state_callback = True
+    for conf in config.get(CONF_ON_START, []):
+        trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
+        await automation.build_automation(trigger, [], conf)
+        use_state_callback = True
+    for conf in config.get(CONF_ON_STATE, []):
+        trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
+        await automation.build_automation(
+            trigger, [(State, "state"), (Error, "error")], conf
+        )
+        use_state_callback = True
+    for conf in config.get(CONF_ON_STOP, []):
+        trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
+        await automation.build_automation(trigger, [], conf)
+        use_state_callback = True
+    if use_state_callback:
+        cg.add_define("USE_ESP32_IMPROV_STATE_CALLBACK")

esphome/components/esp32_improv/automation.h

@@ -0,0 +1,72 @@
+#pragma once
+#ifdef USE_ESP32
+#ifdef USE_ESP32_IMPROV_STATE_CALLBACK
+#include "esp32_improv_component.h"
+
+#include "esphome/core/automation.h"
+
+#include <improv.h>
+
+namespace esphome {
+namespace esp32_improv {
+
+class ESP32ImprovProvisionedTrigger : public Trigger<> {
+ public:
+  explicit ESP32ImprovProvisionedTrigger(ESP32ImprovComponent *parent) {
+    parent->add_on_state_callback([this, parent](improv::State state, improv::Error error) {
+      if (state == improv::STATE_PROVISIONED && !parent->is_failed()) {
+        trigger();
+      }
+    });
+  }
+};
+
+class ESP32ImprovProvisioningTrigger : public Trigger<> {
+ public:
+  explicit ESP32ImprovProvisioningTrigger(ESP32ImprovComponent *parent) {
+    parent->add_on_state_callback([this, parent](improv::State state, improv::Error error) {
+      if (state == improv::STATE_PROVISIONING && !parent->is_failed()) {
+        trigger();
+      }
+    });
+  }
+};
+
+class ESP32ImprovStartTrigger : public Trigger<> {
+ public:
+  explicit ESP32ImprovStartTrigger(ESP32ImprovComponent *parent) {
+    parent->add_on_state_callback([this, parent](improv::State state, improv::Error error) {
+      if ((state == improv::STATE_AUTHORIZED || state == improv::STATE_AWAITING_AUTHORIZATION) &&
+          !parent->is_failed()) {
+        trigger();
+      }
+    });
+  }
+};
+
+class ESP32ImprovStateTrigger : public Trigger<improv::State, improv::Error> {
+ public:
+  explicit ESP32ImprovStateTrigger(ESP32ImprovComponent *parent) {
+    parent->add_on_state_callback([this, parent](improv::State state, improv::Error error) {
+      if (!parent->is_failed()) {
+        trigger(state, error);
+      }
+    });
+  }
+};
+
+class ESP32ImprovStoppedTrigger : public Trigger<> {
+ public:
+  explicit ESP32ImprovStoppedTrigger(ESP32ImprovComponent *parent) {
+    parent->add_on_state_callback([this, parent](improv::State state, improv::Error error) {
+      if (state == improv::STATE_STOPPED && !parent->is_failed()) {
+        trigger();
+      }
+    });
+  }
+};
+
+}  // namespace esp32_improv
+}  // namespace esphome
+#endif
+#endif

esphome/components/esp32_improv/esp32_improv_component.cpp

@@ -68,7 +68,12 @@ void ESP32ImprovComponent::setup_characteristics() {
 
 void ESP32ImprovComponent::loop() {
   if (!global_ble_server->is_running()) {
+    if (this->state_ != improv::STATE_STOPPED) {
       this->state_ = improv::STATE_STOPPED;
+#ifdef USE_ESP32_IMPROV_STATE_CALLBACK
+      this->state_callback_.call(this->state_, this->error_state_);
+#endif
+    }
     this->incoming_data_.clear();
     return;
   }
@@ -217,6 +222,9 @@ void ESP32ImprovComponent::set_state_(improv::State state) {
   service_data[7] = 0x00;  // Reserved
 
   esp32_ble::global_ble->advertising_set_service_data(service_data);
+#ifdef USE_ESP32_IMPROV_STATE_CALLBACK
+  this->state_callback_.call(this->state_, this->error_state_);
+#endif
 }
 
 void ESP32ImprovComponent::set_error_(improv::Error error) {
@@ -270,7 +278,7 @@ void ESP32ImprovComponent::dump_config() {
 void ESP32ImprovComponent::process_incoming_data_() {
   uint8_t length = this->incoming_data_[1];
 
-  ESP_LOGD(TAG, "Processing bytes - %s", format_hex_pretty(this->incoming_data_).c_str());
+  ESP_LOGV(TAG, "Processing bytes - %s", format_hex_pretty(this->incoming_data_).c_str());
   if (this->incoming_data_.size() - 3 == length) {
     this->set_error_(improv::ERROR_NONE);
     improv::ImprovCommand command = improv::parse_improv_data(this->incoming_data_);
@@ -295,7 +303,7 @@ void ESP32ImprovComponent::process_incoming_data_() {
         wifi::global_wifi_component->set_sta(sta);
         wifi::global_wifi_component->start_connecting(sta, false);
         this->set_state_(improv::STATE_PROVISIONING);
-        ESP_LOGD(TAG, "Received Improv wifi settings ssid=%s, password=" LOG_SECRET("%s"), command.ssid.c_str(),
+        ESP_LOGD(TAG, "Received Improv Wi-Fi settings ssid=%s, password=" LOG_SECRET("%s"), command.ssid.c_str(),
                  command.password.c_str());
 
         auto f = std::bind(&ESP32ImprovComponent::on_wifi_connect_timeout_, this);
@@ -313,7 +321,7 @@ void ESP32ImprovComponent::process_incoming_data_() {
         this->incoming_data_.clear();
     }
   } else if (this->incoming_data_.size() - 2 > length) {
-    ESP_LOGV(TAG, "Too much data came in, or malformed resetting buffer...");
+    ESP_LOGV(TAG, "Too much data received or data malformed; resetting buffer...");
     this->incoming_data_.clear();
   } else {
     ESP_LOGV(TAG, "Waiting for split data packets...");
@@ -327,7 +335,7 @@ void ESP32ImprovComponent::on_wifi_connect_timeout_() {
   if (this->authorizer_ != nullptr)
     this->authorized_start_ = millis();
 #endif
-  ESP_LOGW(TAG, "Timed out trying to connect to given WiFi network");
+  ESP_LOGW(TAG, "Timed out while connecting to Wi-Fi network");
   wifi::global_wifi_component->clear_sta();
 }
 

esphome/components/esp32_improv/esp32_improv_component.h

@@ -9,6 +9,10 @@
 #include "esphome/components/esp32_ble_server/ble_server.h"
 #include "esphome/components/wifi/wifi_component.h"
 
+#ifdef USE_ESP32_IMPROV_STATE_CALLBACK
+#include "esphome/core/automation.h"
+#endif
+
 #ifdef USE_BINARY_SENSOR
 #include "esphome/components/binary_sensor/binary_sensor.h"
 #endif
@@ -42,6 +46,11 @@ class ESP32ImprovComponent : public Component, public BLEServiceComponent {
   void stop() override;
   bool is_active() const { return this->state_ != improv::STATE_STOPPED; }
 
+#ifdef USE_ESP32_IMPROV_STATE_CALLBACK
+  void add_on_state_callback(std::function<void(improv::State, improv::Error)> &&callback) {
+    this->state_callback_.add(std::move(callback));
+  }
+#endif
 #ifdef USE_BINARY_SENSOR
   void set_authorizer(binary_sensor::BinarySensor *authorizer) { this->authorizer_ = authorizer; }
 #endif
@@ -54,6 +63,9 @@ class ESP32ImprovComponent : public Component, public BLEServiceComponent {
   void set_wifi_timeout(uint32_t wifi_timeout) { this->wifi_timeout_ = wifi_timeout; }
   uint32_t get_wifi_timeout() const { return this->wifi_timeout_; }
 
+  improv::State get_improv_state() const { return this->state_; }
+  improv::Error get_improv_error_state() const { return this->error_state_; }
+
  protected:
   bool should_start_{false};
   bool setup_complete_{false};
@@ -84,6 +96,9 @@ class ESP32ImprovComponent : public Component, public BLEServiceComponent {
 
   improv::State state_{improv::STATE_STOPPED};
   improv::Error error_state_{improv::ERROR_NONE};
+#ifdef USE_ESP32_IMPROV_STATE_CALLBACK
+  CallbackManager<void(improv::State, improv::Error)> state_callback_{};
+#endif
 
   bool status_indicator_state_{false};
   void set_status_indicator_state_(bool state);

esphome/components/esp32_rmt_led_strip/led_strip.cpp

@@ -22,7 +22,7 @@ void ESP32RMTLEDStripLightOutput::setup() {
 
   size_t buffer_size = this->get_buffer_size_();
 
-  ExternalRAMAllocator<uint8_t> allocator(ExternalRAMAllocator<uint8_t>::ALLOW_FAILURE);
+  RAMAllocator<uint8_t> allocator(this->use_psram_ ? 0 : RAMAllocator<uint8_t>::ALLOC_INTERNAL);
   this->buf_ = allocator.allocate(buffer_size);
   if (this->buf_ == nullptr) {
     ESP_LOGE(TAG, "Cannot allocate LED buffer!");
@@ -37,7 +37,7 @@ void ESP32RMTLEDStripLightOutput::setup() {
     return;
   }
 
-  ExternalRAMAllocator<rmt_item32_t> rmt_allocator(ExternalRAMAllocator<rmt_item32_t>::ALLOW_FAILURE);
+  RAMAllocator<rmt_item32_t> rmt_allocator(this->use_psram_ ? 0 : RAMAllocator<rmt_item32_t>::ALLOC_INTERNAL);
   this->rmt_buf_ = rmt_allocator.allocate(buffer_size * 8 +
                                           1);  // 8 bits per byte, 1 rmt_item32_t per bit + 1 rmt_item32_t for reset
 

esphome/components/esp32_rmt_led_strip/led_strip.h

@@ -45,6 +45,7 @@ class ESP32RMTLEDStripLightOutput : public light::AddressableLight {
   void set_num_leds(uint16_t num_leds) { this->num_leds_ = num_leds; }
   void set_is_rgbw(bool is_rgbw) { this->is_rgbw_ = is_rgbw; }
   void set_is_wrgb(bool is_wrgb) { this->is_wrgb_ = is_wrgb; }
+  void set_use_psram(bool use_psram) { this->use_psram_ = use_psram; }
 
   /// Set a maximum refresh rate in µs as some lights do not like being updated too often.
   void set_max_refresh_rate(uint32_t interval_us) { this->max_refresh_rate_ = interval_us; }
@@ -75,6 +76,7 @@ class ESP32RMTLEDStripLightOutput : public light::AddressableLight {
   uint16_t num_leds_;
   bool is_rgbw_;
   bool is_wrgb_;
+  bool use_psram_;
 
   rmt_item32_t bit0_, bit1_, reset_;
   RGBOrder rgb_order_;

esphome/components/esp32_rmt_led_strip/light.py

@@ -55,7 +55,7 @@ CHIPSETS = {
     "SM16703": LEDStripTimings(300, 900, 900, 300, 0, 0),
 }
 
-
+CONF_USE_PSRAM = "use_psram"
 CONF_IS_WRGB = "is_wrgb"
 CONF_BIT0_HIGH = "bit0_high"
 CONF_BIT0_LOW = "bit0_low"
@@ -77,6 +77,7 @@ CONFIG_SCHEMA = cv.All(
             cv.Optional(CONF_CHIPSET): cv.one_of(*CHIPSETS, upper=True),
             cv.Optional(CONF_IS_RGBW, default=False): cv.boolean,
             cv.Optional(CONF_IS_WRGB, default=False): cv.boolean,
+            cv.Optional(CONF_USE_PSRAM, default=True): cv.boolean,
             cv.Inclusive(
                 CONF_BIT0_HIGH,
                 "custom",
@@ -145,6 +146,7 @@ async def to_code(config):
     cg.add(var.set_rgb_order(config[CONF_RGB_ORDER]))
     cg.add(var.set_is_rgbw(config[CONF_IS_RGBW]))
     cg.add(var.set_is_wrgb(config[CONF_IS_WRGB]))
+    cg.add(var.set_use_psram(config[CONF_USE_PSRAM]))
 
     cg.add(
         var.set_rmt_channel(

esphome/components/ethernet/__init__.py

@@ -59,6 +59,7 @@ ETHERNET_TYPES = {
     "KSZ8081": EthernetType.ETHERNET_TYPE_KSZ8081,
     "KSZ8081RNA": EthernetType.ETHERNET_TYPE_KSZ8081RNA,
     "W5500": EthernetType.ETHERNET_TYPE_W5500,
+    "OPENETH": EthernetType.ETHERNET_TYPE_OPENETH,
 }
 
 SPI_ETHERNET_TYPES = ["W5500"]
@@ -171,6 +172,7 @@ CONFIG_SCHEMA = cv.All(
             "KSZ8081": RMII_SCHEMA,
             "KSZ8081RNA": RMII_SCHEMA,
             "W5500": SPI_SCHEMA,
+            "OPENETH": BASE_SCHEMA,
         },
         upper=True,
     ),
@@ -240,6 +242,9 @@ async def to_code(config):
         if CORE.using_esp_idf:
             add_idf_sdkconfig_option("CONFIG_ETH_USE_SPI_ETHERNET", True)
             add_idf_sdkconfig_option("CONFIG_ETH_SPI_ETHERNET_W5500", True)
+    elif config[CONF_TYPE] == "OPENETH":
+        cg.add_define("USE_ETHERNET_OPENETH")
+        add_idf_sdkconfig_option("CONFIG_ETH_USE_OPENETH", True)
     else:
         cg.add(var.set_phy_addr(config[CONF_PHY_ADDR]))
         cg.add(var.set_mdc_pin(config[CONF_MDC_PIN]))

esphome/components/ethernet/ethernet_component.cpp

@@ -120,6 +120,8 @@ void EthernetComponent::setup() {
   phy_config.reset_gpio_num = this->reset_pin_;
 
   esp_eth_mac_t *mac = esp_eth_mac_new_w5500(&w5500_config, &mac_config);
+#elif defined(USE_ETHERNET_OPENETH)
+  esp_eth_mac_t *mac = esp_eth_mac_new_openeth(&mac_config);
 #else
   phy_config.phy_addr = this->phy_addr_;
   phy_config.reset_gpio_num = this->power_pin_;
@@ -143,6 +145,13 @@ void EthernetComponent::setup() {
 #endif
 
   switch (this->type_) {
+#ifdef USE_ETHERNET_OPENETH
+    case ETHERNET_TYPE_OPENETH: {
+      phy_config.autonego_timeout_ms = 1000;
+      this->phy_ = esp_eth_phy_new_dp83848(&phy_config);
+      break;
+    }
+#endif
 #if CONFIG_ETH_USE_ESP32_EMAC
     case ETHERNET_TYPE_LAN8720: {
       this->phy_ = esp_eth_phy_new_lan87xx(&phy_config);
@@ -302,6 +311,10 @@ void EthernetComponent::dump_config() {
       eth_type = "W5500";
       break;
 
+    case ETHERNET_TYPE_OPENETH:
+      eth_type = "OPENETH";
+      break;
+
     default:
       eth_type = "Unknown";
       break;

esphome/components/ethernet/ethernet_component.h

@@ -25,6 +25,7 @@ enum EthernetType {
   ETHERNET_TYPE_KSZ8081,
   ETHERNET_TYPE_KSZ8081RNA,
   ETHERNET_TYPE_W5500,
+  ETHERNET_TYPE_OPENETH,
 };
 
 struct ManualIP {

esphome/components/event/__init__.py

@@ -1,6 +1,6 @@
 from esphome import automation
 import esphome.codegen as cg
-from esphome.components import mqtt
+from esphome.components import mqtt, web_server
 import esphome.config_validation as cv
 from esphome.const import (
     CONF_DEVICE_CLASS,
@@ -11,6 +11,7 @@ from esphome.const import (
     CONF_MQTT_ID,
     CONF_ON_EVENT,
     CONF_TRIGGER_ID,
+    CONF_WEB_SERVER,
     DEVICE_CLASS_BUTTON,
     DEVICE_CLASS_DOORBELL,
     DEVICE_CLASS_EMPTY,
@@ -40,7 +41,10 @@ EventTrigger = event_ns.class_("EventTrigger", automation.Trigger.template())
 
 validate_device_class = cv.one_of(*DEVICE_CLASSES, lower=True, space="_")
 
-EVENT_SCHEMA = cv.ENTITY_BASE_SCHEMA.extend(cv.MQTT_COMPONENT_SCHEMA).extend(
+EVENT_SCHEMA = (
+    cv.ENTITY_BASE_SCHEMA.extend(web_server.WEBSERVER_SORTING_SCHEMA)
+    .extend(cv.MQTT_COMPONENT_SCHEMA)
+    .extend(
         {
             cv.OnlyWith(CONF_MQTT_ID, "mqtt"): cv.declare_id(mqtt.MQTTEventComponent),
             cv.GenerateID(): cv.declare_id(Event),
@@ -52,6 +56,7 @@ EVENT_SCHEMA = cv.ENTITY_BASE_SCHEMA.extend(cv.MQTT_COMPONENT_SCHEMA).extend(
             ),
         }
     )
+)
 
 _UNDEF = object()
 
@@ -97,6 +102,9 @@ async def setup_event_core_(var, config, *, event_types: list[str]):
         mqtt_ = cg.new_Pvariable(mqtt_id, var)
         await mqtt.register_mqtt_component(mqtt_, config)
 
+    if web_server_config := config.get(CONF_WEB_SERVER):
+        await web_server.add_entity_config(var, web_server_config)
+
 
 async def register_event(var, config, *, event_types: list[str]):
     if not CORE.has_id(config[CONF_ID]):

esphome/components/fan/__init__.py

@@ -25,7 +25,7 @@ from esphome.const import (
     CONF_SPEED_LEVEL_STATE_TOPIC,
     CONF_SPEED_STATE_TOPIC,
     CONF_TRIGGER_ID,
-    CONF_WEB_SERVER_ID,
+    CONF_WEB_SERVER,
 )
 from esphome.core import CORE, coroutine_with_priority
 from esphome.cpp_helpers import setup_entity
@@ -218,9 +218,8 @@ async def setup_fan_core_(var, config):
         if (speed_command_topic := config.get(CONF_SPEED_COMMAND_TOPIC)) is not None:
             cg.add(mqtt_.set_custom_speed_command_topic(speed_command_topic))
 
-    if (webserver_id := config.get(CONF_WEB_SERVER_ID)) is not None:
+    if web_server_config := config.get(CONF_WEB_SERVER):
-        web_server_ = await cg.get_variable(webserver_id)
+        await web_server.add_entity_config(var, web_server_config)
-        web_server.add_entity_to_sorting_list(web_server_, var, config)
 
     for conf in config.get(CONF_ON_STATE, []):
         trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)

esphome/components/font/__init__.py

@@ -98,13 +98,13 @@ def validate_pillow_installed(value):
     except ImportError as err:
         raise cv.Invalid(
             "Please install the pillow python package to use this feature. "
-            '(pip install "pillow==10.2.0")'
+            '(pip install "pillow==10.4.0")'
         ) from err
 
-    if version.parse(PIL.__version__) != version.parse("10.2.0"):
+    if version.parse(PIL.__version__) != version.parse("10.4.0"):
         raise cv.Invalid(
-            "Please update your pillow installation to 10.2.0. "
+            "Please update your pillow installation to 10.4.0. "
-            '(pip install "pillow==10.2.0")'
+            '(pip install "pillow==10.4.0")'
         )
 
     return value

esphome/components/gp2y1010au0f/gp2y1010au0f.cpp

@@ -0,0 +1,67 @@
+#include "gp2y1010au0f.h"
+#include "esphome/core/hal.h"
+#include "esphome/core/log.h"
+
+#include <cinttypes>
+
+namespace esphome {
+namespace gp2y1010au0f {
+
+static const char *const TAG = "gp2y1010au0f";
+static const float MIN_VOLTAGE = 0.0f;
+static const float MAX_VOLTAGE = 4.0f;
+
+void GP2Y1010AU0FSensor::dump_config() {
+  LOG_SENSOR("", "Sharp GP2Y1010AU0F PM2.5 Sensor", this);
+  ESP_LOGCONFIG(TAG, "  Sampling duration: %" PRId32 " ms", this->sample_duration_);
+  ESP_LOGCONFIG(TAG, "  ADC voltage multiplier: %.3f", this->voltage_multiplier_);
+  LOG_UPDATE_INTERVAL(this);
+}
+
+void GP2Y1010AU0FSensor::update() {
+  is_sampling_ = true;
+
+  this->set_timeout("read", this->sample_duration_, [this]() {
+    this->is_sampling_ = false;
+    if (this->num_samples_ == 0)
+      return;
+
+    float mean = this->sample_sum_ / float(this->num_samples_);
+    ESP_LOGD(TAG, "ADC read voltage: %.3f V (mean from %" PRId32 " samples)", mean, this->num_samples_);
+
+    // PM2.5 calculation
+    // ref: https://www.howmuchsnow.com/arduino/airquality/
+    int16_t pm_2_5_value = 170 * mean;
+    this->publish_state(pm_2_5_value);
+  });
+
+  // reset readings
+  this->num_samples_ = 0;
+  this->sample_sum_ = 0.0f;
+}
+
+void GP2Y1010AU0FSensor::loop() {
+  if (!this->is_sampling_)
+    return;
+
+  // enable the internal IR LED
+  this->led_output_->turn_on();
+  // wait for the sensor to stabilize
+  delayMicroseconds(this->sample_wait_before_);
+  // perform a single sample
+  float read_voltage = this->source_->sample();
+  // disable the internal IR LED
+  this->led_output_->turn_off();
+
+  if (std::isnan(read_voltage))
+    return;
+  read_voltage = read_voltage * this->voltage_multiplier_ - this->voltage_offset_;
+  if (read_voltage < MIN_VOLTAGE || read_voltage > MAX_VOLTAGE)
+    return;
+
+  this->num_samples_++;
+  this->sample_sum_ += read_voltage;
+}
+
+}  // namespace gp2y1010au0f
+}  // namespace esphome

esphome/components/gp2y1010au0f/gp2y1010au0f.h

@@ -0,0 +1,52 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/components/voltage_sampler/voltage_sampler.h"
+#include "esphome/components/output/binary_output.h"
+
+namespace esphome {
+namespace gp2y1010au0f {
+
+class GP2Y1010AU0FSensor : public sensor::Sensor, public PollingComponent {
+ public:
+  void update() override;
+  void loop() override;
+  void dump_config() override;
+  float get_setup_priority() const override {
+    // after the base sensor has been initialized
+    return setup_priority::DATA - 1.0f;
+  }
+
+  void set_adc_source(voltage_sampler::VoltageSampler *source) { source_ = source; }
+  void set_voltage_refs(float offset, float multiplier) {
+    this->voltage_offset_ = offset;
+    this->voltage_multiplier_ = multiplier;
+  }
+  void set_led_output(output::BinaryOutput *output) { led_output_ = output; }
+
+ protected:
+  // duration in ms of the sampling phase
+  uint32_t sample_duration_ = 100;
+  // duration in us of the wait before sampling
+  // ref: https://global.sharp/products/device/lineup/data/pdf/datasheet/gp2y1010au_appl_e.pdf
+  uint32_t sample_wait_before_ = 280;
+  // duration in us of the wait after sampling
+  // it seems no need to delay on purpose since one ADC sampling takes longer than that (300-400 us on ESP8266)
+  // uint32_t sample_wait_after_ = 40;
+  // the sampling source to read voltage from
+  voltage_sampler::VoltageSampler *source_;
+  // ADC voltage reading offset
+  float voltage_offset_ = 0.0f;
+  // ADC voltage reading multiplier
+  float voltage_multiplier_ = 1.0f;
+  // the binary output to control the sampling LED
+  output::BinaryOutput *led_output_;
+
+  float sample_sum_ = 0.0f;
+  uint32_t num_samples_ = 0;
+  bool is_sampling_ = false;
+};
+
+}  // namespace gp2y1010au0f
+}  // namespace esphome

esphome/components/gp2y1010au0f/sensor.py

@@ -0,0 +1,61 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import sensor, voltage_sampler, output
+from esphome.const import (
+    CONF_SENSOR,
+    CONF_OUTPUT,
+    DEVICE_CLASS_PM25,
+    STATE_CLASS_MEASUREMENT,
+    UNIT_MICROGRAMS_PER_CUBIC_METER,
+    ICON_CHEMICAL_WEAPON,
+)
+
+DEPENDENCIES = ["output"]
+AUTO_LOAD = ["voltage_sampler"]
+CODEOWNERS = ["@zry98"]
+
+CONF_ADC_VOLTAGE_OFFSET = "adc_voltage_offset"
+CONF_ADC_VOLTAGE_MULTIPLIER = "adc_voltage_multiplier"
+
+gp2y1010au0f_ns = cg.esphome_ns.namespace("gp2y1010au0f")
+GP2Y1010AU0FSensor = gp2y1010au0f_ns.class_(
+    "GP2Y1010AU0FSensor", sensor.Sensor, cg.PollingComponent
+)
+
+CONFIG_SCHEMA = (
+    sensor.sensor_schema(
+        GP2Y1010AU0FSensor,
+        unit_of_measurement=UNIT_MICROGRAMS_PER_CUBIC_METER,
+        accuracy_decimals=0,
+        device_class=DEVICE_CLASS_PM25,
+        state_class=STATE_CLASS_MEASUREMENT,
+        icon=ICON_CHEMICAL_WEAPON,
+    )
+    .extend(
+        {
+            cv.Required(CONF_SENSOR): cv.use_id(voltage_sampler.VoltageSampler),
+            cv.Optional(CONF_ADC_VOLTAGE_OFFSET, default=0.0): cv.float_,
+            cv.Optional(CONF_ADC_VOLTAGE_MULTIPLIER, default=1.0): cv.float_,
+            cv.Required(CONF_OUTPUT): cv.use_id(output.BinaryOutput),
+        }
+    )
+    .extend(cv.polling_component_schema("60s"))
+)
+
+
+async def to_code(config):
+    var = await sensor.new_sensor(config)
+    await cg.register_component(var, config)
+
+    # the ADC sensor to read voltage from
+    adc_sensor = await cg.get_variable(config[CONF_SENSOR])
+    cg.add(var.set_adc_source(adc_sensor))
+    cg.add(
+        var.set_voltage_refs(
+            config[CONF_ADC_VOLTAGE_OFFSET], config[CONF_ADC_VOLTAGE_MULTIPLIER]
+        )
+    )
+
+    # the binary output to control the module's internal IR LED
+    led_output = await cg.get_variable(config[CONF_OUTPUT])
+    cg.add(var.set_led_output(led_output))

esphome/components/gpio_expander/cached_gpio.h

@@ -0,0 +1,38 @@
+#pragma once
+
+#include <array>
+#include <cstdint>
+#include "esphome/core/hal.h"
+
+namespace esphome {
+namespace gpio_expander {
+
+/// @brief A class to cache the read state of a GPIO expander.
+template<typename T, T N> class CachedGpioExpander {
+ public:
+  bool digital_read(T pin) {
+    if (!this->read_cache_invalidated_[pin]) {
+      this->read_cache_invalidated_[pin] = true;
+      return this->digital_read_cache(pin);
+    }
+    return this->digital_read_hw(pin);
+  }
+
+  void digital_write(T pin, bool value) { this->digital_write_hw(pin, value); }
+
+ protected:
+  virtual bool digital_read_hw(T pin) = 0;
+  virtual bool digital_read_cache(T pin) = 0;
+  virtual void digital_write_hw(T pin, bool value) = 0;
+
+  void reset_pin_cache_() {
+    for (T i = 0; i < N; i++) {
+      this->read_cache_invalidated_[i] = false;
+    }
+  }
+
+  std::array<bool, N> read_cache_invalidated_{};
+};
+
+}  // namespace gpio_expander
+}  // namespace esphome

esphome/components/grove_gas_mc_v2/grove_gas_mc_v2.cpp

@@ -0,0 +1,88 @@
+#include "grove_gas_mc_v2.h"
+#include "esphome/core/hal.h"
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace grove_gas_mc_v2 {
+
+static const char *const TAG = "grove_gas_mc_v2";
+
+// I2C Commands for Grove Gas Multichannel V2 Sensor
+// Taken from:
+// https://github.com/Seeed-Studio/Seeed_Arduino_MultiGas/blob/master/src/Multichannel_Gas_GroveGasMultichannelV2.h
+static const uint8_t GROVE_GAS_MC_V2_HEAT_ON = 0xFE;
+static const uint8_t GROVE_GAS_MC_V2_HEAT_OFF = 0xFF;
+static const uint8_t GROVE_GAS_MC_V2_READ_GM102B = 0x01;
+static const uint8_t GROVE_GAS_MC_V2_READ_GM302B = 0x03;
+static const uint8_t GROVE_GAS_MC_V2_READ_GM502B = 0x05;
+static const uint8_t GROVE_GAS_MC_V2_READ_GM702B = 0x07;
+
+bool GroveGasMultichannelV2Component::read_sensor_(uint8_t address, sensor::Sensor *sensor) {
+  if (sensor == nullptr) {
+    return true;
+  }
+  uint32_t value = 0;
+  if (!this->read_bytes(address, (uint8_t *) &value, 4)) {
+    ESP_LOGW(TAG, "Reading Grove Gas Sensor data failed!");
+    this->error_code_ = COMMUNICATION_FAILED;
+    this->status_set_warning();
+    return false;
+  }
+  sensor->publish_state(value);
+  return true;
+}
+
+void GroveGasMultichannelV2Component::setup() {
+  ESP_LOGCONFIG(TAG, "Setting up Grove Multichannel Gas Sensor V2...");
+
+  // Before reading sensor values, must preheat sensor
+  if (!(this->write_bytes(GROVE_GAS_MC_V2_HEAT_ON, {}))) {
+    this->mark_failed();
+    this->error_code_ = APP_START_FAILED;
+  }
+}
+
+void GroveGasMultichannelV2Component::update() {
+  // Read from each of the gas sensors
+  if (!this->read_sensor_(GROVE_GAS_MC_V2_READ_GM102B, this->nitrogen_dioxide_sensor_))
+    return;
+  if (!this->read_sensor_(GROVE_GAS_MC_V2_READ_GM302B, this->ethanol_sensor_))
+    return;
+  if (!this->read_sensor_(GROVE_GAS_MC_V2_READ_GM502B, this->tvoc_sensor_))
+    return;
+  if (!this->read_sensor_(GROVE_GAS_MC_V2_READ_GM702B, this->carbon_monoxide_sensor_))
+    return;
+
+  this->status_clear_warning();
+}
+
+void GroveGasMultichannelV2Component::dump_config() {
+  ESP_LOGCONFIG(TAG, "Grove Multichannel Gas Sensor V2");
+  LOG_I2C_DEVICE(this)
+  LOG_UPDATE_INTERVAL(this)
+  LOG_SENSOR("  ", "Nitrogen Dioxide", this->nitrogen_dioxide_sensor_)
+  LOG_SENSOR("  ", "Ethanol", this->ethanol_sensor_)
+  LOG_SENSOR("  ", "Carbon Monoxide", this->carbon_monoxide_sensor_)
+  LOG_SENSOR("  ", "TVOC", this->tvoc_sensor_)
+
+  if (this->is_failed()) {
+    switch (this->error_code_) {
+      case COMMUNICATION_FAILED:
+        ESP_LOGW(TAG, "Communication failed! Is the sensor connected?");
+        break;
+      case APP_INVALID:
+        ESP_LOGW(TAG, "Sensor reported invalid APP installed.");
+        break;
+      case APP_START_FAILED:
+        ESP_LOGW(TAG, "Sensor reported APP start failed.");
+        break;
+      case UNKNOWN:
+      default:
+        ESP_LOGW(TAG, "Unknown setup error!");
+        break;
+    }
+  }
+}
+
+}  // namespace grove_gas_mc_v2
+}  // namespace esphome