diff --git a/CODEOWNERS b/CODEOWNERS
index 73ceb6a751..1217f606a5 100644
--- a/CODEOWNERS
+++ b/CODEOWNERS
@@ -168,7 +168,8 @@ esphome/components/homeassistant/* @OttoWinter
 esphome/components/honeywell_hih_i2c/* @Benichou34
 esphome/components/honeywellabp/* @RubyBailey
 esphome/components/honeywellabp2_i2c/* @jpfaff
-esphome/components/host/* @esphome/core
+esphome/components/host/* @clydebarrow @esphome/core
+esphome/components/host/time/* @clydebarrow
 esphome/components/hrxl_maxsonar_wr/* @netmikey
 esphome/components/hte501/* @Stock-M
 esphome/components/htu31d/* @betterengineering
diff --git a/docker/Dockerfile b/docker/Dockerfile
index 3c661b7e1c..f6234235f7 100644
--- a/docker/Dockerfile
+++ b/docker/Dockerfile
@@ -100,6 +100,9 @@ RUN --mount=type=tmpfs,target=/root/.cargo if [ "$TARGETARCH$TARGETVARIANT" = "a
     --break-system-packages --no-cache-dir -r /requirements.txt -r /requirements_optional.txt \
     && /platformio_install_deps.py /platformio.ini --libraries
 
+# Avoid unsafe git error when container user and file config volume permissions don't match
+RUN git config --system --add safe.directory '/config/*'
+
 
 # ======================= docker-type image =======================
 FROM base AS docker
diff --git a/esphome/components/ethernet/__init__.py b/esphome/components/ethernet/__init__.py
index ade94cb9f5..697436415b 100644
--- a/esphome/components/ethernet/__init__.py
+++ b/esphome/components/ethernet/__init__.py
@@ -11,6 +11,7 @@ from esphome.components.esp32.const import (
 from esphome.const import (
     CONF_DOMAIN,
     CONF_ID,
+    CONF_VALUE,
     CONF_MANUAL_IP,
     CONF_STATIC_IP,
     CONF_TYPE,
@@ -26,6 +27,8 @@ from esphome.const import (
     CONF_INTERRUPT_PIN,
     CONF_RESET_PIN,
     CONF_SPI,
+    CONF_PAGE_ID,
+    CONF_ADDRESS,
 )
 from esphome.core import CORE, coroutine_with_priority
 from esphome.components.network import IPAddress
@@ -36,11 +39,13 @@ DEPENDENCIES = ["esp32"]
 AUTO_LOAD = ["network"]
 
 ethernet_ns = cg.esphome_ns.namespace("ethernet")
+PHYRegister = ethernet_ns.struct("PHYRegister")
 CONF_PHY_ADDR = "phy_addr"
 CONF_MDC_PIN = "mdc_pin"
 CONF_MDIO_PIN = "mdio_pin"
 CONF_CLK_MODE = "clk_mode"
 CONF_POWER_PIN = "power_pin"
+CONF_PHY_REGISTERS = "phy_registers"
 
 CONF_CLOCK_SPEED = "clock_speed"
 
@@ -117,6 +122,13 @@ BASE_SCHEMA = cv.Schema(
     }
 ).extend(cv.COMPONENT_SCHEMA)
 
+PHY_REGISTER_SCHEMA = cv.Schema(
+    {
+        cv.Required(CONF_ADDRESS): cv.hex_int,
+        cv.Required(CONF_VALUE): cv.hex_int,
+        cv.Optional(CONF_PAGE_ID): cv.hex_int,
+    }
+)
 RMII_SCHEMA = BASE_SCHEMA.extend(
     cv.Schema(
         {
@@ -127,6 +139,7 @@ RMII_SCHEMA = BASE_SCHEMA.extend(
             ),
             cv.Optional(CONF_PHY_ADDR, default=0): cv.int_range(min=0, max=31),
             cv.Optional(CONF_POWER_PIN): pins.internal_gpio_output_pin_number,
+            cv.Optional(CONF_PHY_REGISTERS): cv.ensure_list(PHY_REGISTER_SCHEMA),
         }
     )
 )
@@ -198,6 +211,15 @@ def manual_ip(config):
     )
 
 
+def phy_register(address: int, value: int, page: int):
+    return cg.StructInitializer(
+        PHYRegister,
+        ("address", address),
+        ("value", value),
+        ("page", page),
+    )
+
+
 @coroutine_with_priority(60.0)
 async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
@@ -225,6 +247,13 @@ async def to_code(config):
         cg.add(var.set_clk_mode(*CLK_MODES[config[CONF_CLK_MODE]]))
         if CONF_POWER_PIN in config:
             cg.add(var.set_power_pin(config[CONF_POWER_PIN]))
+        for register_value in config.get(CONF_PHY_REGISTERS, []):
+            reg = phy_register(
+                register_value.get(CONF_ADDRESS),
+                register_value.get(CONF_VALUE),
+                register_value.get(CONF_PAGE_ID),
+            )
+            cg.add(var.add_phy_register(reg))
 
     cg.add(var.set_type(ETHERNET_TYPES[config[CONF_TYPE]]))
     cg.add(var.set_use_address(config[CONF_USE_ADDRESS]))
diff --git a/esphome/components/ethernet/ethernet_component.cpp b/esphome/components/ethernet/ethernet_component.cpp
index 7672dc2dcb..75bdd29be7 100644
--- a/esphome/components/ethernet/ethernet_component.cpp
+++ b/esphome/components/ethernet/ethernet_component.cpp
@@ -28,6 +28,13 @@ EthernetComponent *global_eth_component;  // NOLINT(cppcoreguidelines-avoid-non-
     return; \
   }
 
+#define ESPHL_ERROR_CHECK_RET(err, message, ret) \
+  if ((err) != ESP_OK) { \
+    ESP_LOGE(TAG, message ": (%d) %s", err, esp_err_to_name(err)); \
+    this->mark_failed(); \
+    return ret; \
+  }
+
 EthernetComponent::EthernetComponent() { global_eth_component = this; }
 
 void EthernetComponent::setup() {
@@ -188,9 +195,9 @@ void EthernetComponent::setup() {
     // KSZ8081RNA default is incorrect. It expects a 25MHz clock instead of the 50MHz we provide.
     this->ksz8081_set_clock_reference_(mac);
   }
-  if (this->type_ == ETHERNET_TYPE_RTL8201 && this->clk_mode_ == EMAC_CLK_EXT_IN) {
-    // Change in default behavior of RTL8201FI may require register setting to enable external clock
-    this->rtl8201_set_rmii_mode_(mac);
+
+  for (const auto &phy_register : this->phy_registers_) {
+    this->write_phy_register_(mac, phy_register);
   }
 #endif
 
@@ -498,22 +505,9 @@ void EthernetComponent::dump_connect_params_() {
   }
 #endif /* USE_NETWORK_IPV6 */
 
-  esp_err_t err;
-
-  uint8_t mac[6];
-  err = esp_eth_ioctl(this->eth_handle_, ETH_CMD_G_MAC_ADDR, &mac);
-  ESPHL_ERROR_CHECK(err, "ETH_CMD_G_MAC error");
-  ESP_LOGCONFIG(TAG, "  MAC Address: %02X:%02X:%02X:%02X:%02X:%02X", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
-
-  eth_duplex_t duplex_mode;
-  err = esp_eth_ioctl(this->eth_handle_, ETH_CMD_G_DUPLEX_MODE, &duplex_mode);
-  ESPHL_ERROR_CHECK(err, "ETH_CMD_G_DUPLEX_MODE error");
-  ESP_LOGCONFIG(TAG, "  Is Full Duplex: %s", YESNO(duplex_mode == ETH_DUPLEX_FULL));
-
-  eth_speed_t speed;
-  err = esp_eth_ioctl(this->eth_handle_, ETH_CMD_G_SPEED, &speed);
-  ESPHL_ERROR_CHECK(err, "ETH_CMD_G_SPEED error");
-  ESP_LOGCONFIG(TAG, "  Link Speed: %u", speed == ETH_SPEED_100M ? 100 : 10);
+  ESP_LOGCONFIG(TAG, "  MAC Address: %s", this->get_eth_mac_address_pretty().c_str());
+  ESP_LOGCONFIG(TAG, "  Is Full Duplex: %s", YESNO(this->get_duplex_mode() == ETH_DUPLEX_FULL));
+  ESP_LOGCONFIG(TAG, "  Link Speed: %u", this->get_link_speed() == ETH_SPEED_100M ? 100 : 10);
 }
 
 #ifdef USE_ETHERNET_SPI
@@ -533,6 +527,7 @@ void EthernetComponent::set_clk_mode(emac_rmii_clock_mode_t clk_mode, emac_rmii_
   this->clk_mode_ = clk_mode;
   this->clk_gpio_ = clk_gpio;
 }
+void EthernetComponent::add_phy_register(PHYRegister register_value) { this->phy_registers_.push_back(register_value); }
 #endif
 void EthernetComponent::set_type(EthernetType type) { this->type_ = type; }
 void EthernetComponent::set_manual_ip(const ManualIP &manual_ip) { this->manual_ip_ = manual_ip; }
@@ -546,6 +541,34 @@ std::string EthernetComponent::get_use_address() const {
 
 void EthernetComponent::set_use_address(const std::string &use_address) { this->use_address_ = use_address; }
 
+void EthernetComponent::get_eth_mac_address_raw(uint8_t *mac) {
+  esp_err_t err;
+  err = esp_eth_ioctl(this->eth_handle_, ETH_CMD_G_MAC_ADDR, mac);
+  ESPHL_ERROR_CHECK(err, "ETH_CMD_G_MAC error");
+}
+
+std::string EthernetComponent::get_eth_mac_address_pretty() {
+  uint8_t mac[6];
+  get_mac_address_raw(mac);
+  return str_snprintf("%02X:%02X:%02X:%02X:%02X:%02X", 17, mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+}
+
+eth_duplex_t EthernetComponent::get_duplex_mode() {
+  esp_err_t err;
+  eth_duplex_t duplex_mode;
+  err = esp_eth_ioctl(this->eth_handle_, ETH_CMD_G_DUPLEX_MODE, &duplex_mode);
+  ESPHL_ERROR_CHECK_RET(err, "ETH_CMD_G_DUPLEX_MODE error", ETH_DUPLEX_HALF);
+  return duplex_mode;
+}
+
+eth_speed_t EthernetComponent::get_link_speed() {
+  esp_err_t err;
+  eth_speed_t speed;
+  err = esp_eth_ioctl(this->eth_handle_, ETH_CMD_G_SPEED, &speed);
+  ESPHL_ERROR_CHECK_RET(err, "ETH_CMD_G_SPEED error", ETH_SPEED_10M);
+  return speed;
+}
+
 bool EthernetComponent::powerdown() {
   ESP_LOGI(TAG, "Powering down ethernet PHY");
   if (this->phy_ == nullptr) {
@@ -591,44 +614,27 @@ void EthernetComponent::ksz8081_set_clock_reference_(esp_eth_mac_t *mac) {
     ESP_LOGVV(TAG, "KSZ8081 PHY Control 2: %s", format_hex_pretty((u_int8_t *) &phy_control_2, 2).c_str());
   }
 }
-constexpr uint8_t RTL8201_RMSR_REG_ADDR = 0x10;
-void EthernetComponent::rtl8201_set_rmii_mode_(esp_eth_mac_t *mac) {
+
+void EthernetComponent::write_phy_register_(esp_eth_mac_t *mac, PHYRegister register_data) {
   esp_err_t err;
-  uint32_t phy_rmii_mode;
-  err = mac->write_phy_reg(mac, this->phy_addr_, 0x1f, 0x07);
-  ESPHL_ERROR_CHECK(err, "Setting Page 7 failed");
+  constexpr uint8_t eth_phy_psr_reg_addr = 0x1F;
 
-  /*
-   * RTL8201 RMII Mode Setting Register (RMSR)
-   * Page 7 Register 16
-   *
-   * bit 0      Reserved            0
-   * bit 1      Rg_rmii_rxdsel      1 (default)
-   * bit 2      Rg_rmii_rxdv_sel:   0 (default)
-   * bit 3      RMII Mode:          1 (RMII Mode)
-   * bit 4~7    Rg_rmii_rx_offset:  1111 (default)
-   * bit 8~11   Rg_rmii_tx_offset:  1111 (default)
-   * bit 12     Rg_rmii_clkdir:     1 (Input)
-   * bit 13~15  Reserved            000
-   *
-   * Binary: 0001 1111 1111 1010
-   * Hex: 0x1FFA
-   *
-   */
+  if (this->type_ == ETHERNET_TYPE_RTL8201 && register_data.page) {
+    ESP_LOGD(TAG, "Select PHY Register Page: 0x%02" PRIX32, register_data.page);
+    err = mac->write_phy_reg(mac, this->phy_addr_, eth_phy_psr_reg_addr, register_data.page);
+    ESPHL_ERROR_CHECK(err, "Select PHY Register page failed");
+  }
 
-  err = mac->read_phy_reg(mac, this->phy_addr_, RTL8201_RMSR_REG_ADDR, &(phy_rmii_mode));
-  ESPHL_ERROR_CHECK(err, "Read PHY RMSR Register failed");
-  ESP_LOGV(TAG, "Hardware default RTL8201 RMII Mode Register is: 0x%04" PRIX32, phy_rmii_mode);
+  ESP_LOGD(TAG, "Writing to PHY Register Address: 0x%02" PRIX32, register_data.address);
+  ESP_LOGD(TAG, "Writing to PHY Register Value: 0x%04" PRIX32, register_data.value);
+  err = mac->write_phy_reg(mac, this->phy_addr_, register_data.address, register_data.value);
+  ESPHL_ERROR_CHECK(err, "Writing PHY Register failed");
 
-  err = mac->write_phy_reg(mac, this->phy_addr_, RTL8201_RMSR_REG_ADDR, 0x1FFA);
-  ESPHL_ERROR_CHECK(err, "Setting Register 16 RMII Mode Setting failed");
-
-  err = mac->read_phy_reg(mac, this->phy_addr_, RTL8201_RMSR_REG_ADDR, &(phy_rmii_mode));
-  ESPHL_ERROR_CHECK(err, "Read PHY RMSR Register failed");
-  ESP_LOGV(TAG, "Setting RTL8201 RMII Mode Register to: 0x%04" PRIX32, phy_rmii_mode);
-
-  err = mac->write_phy_reg(mac, this->phy_addr_, 0x1f, 0x0);
-  ESPHL_ERROR_CHECK(err, "Setting Page 0 failed");
+  if (this->type_ == ETHERNET_TYPE_RTL8201 && register_data.page) {
+    ESP_LOGD(TAG, "Select PHY Register Page 0x%02" PRIX32, 0x0);
+    err = mac->write_phy_reg(mac, this->phy_addr_, eth_phy_psr_reg_addr, 0x0);
+    ESPHL_ERROR_CHECK(err, "Select PHY Register Page 0 failed");
+  }
 }
 
 #endif
diff --git a/esphome/components/ethernet/ethernet_component.h b/esphome/components/ethernet/ethernet_component.h
index 3705e3e06a..f0fe6cab87 100644
--- a/esphome/components/ethernet/ethernet_component.h
+++ b/esphome/components/ethernet/ethernet_component.h
@@ -35,6 +35,12 @@ struct ManualIP {
   network::IPAddress dns2;  ///< The second DNS server. 0.0.0.0 for default.
 };
 
+struct PHYRegister {
+  uint32_t address;
+  uint32_t value;
+  uint32_t page;
+};
+
 enum class EthernetComponentState {
   STOPPED,
   CONNECTING,
@@ -66,6 +72,7 @@ class EthernetComponent : public Component {
   void set_mdc_pin(uint8_t mdc_pin);
   void set_mdio_pin(uint8_t mdio_pin);
   void set_clk_mode(emac_rmii_clock_mode_t clk_mode, emac_rmii_clock_gpio_t clk_gpio);
+  void add_phy_register(PHYRegister register_value);
 #endif
   void set_type(EthernetType type);
   void set_manual_ip(const ManualIP &manual_ip);
@@ -74,6 +81,10 @@ class EthernetComponent : public Component {
   network::IPAddress get_dns_address(uint8_t num);
   std::string get_use_address() const;
   void set_use_address(const std::string &use_address);
+  void get_eth_mac_address_raw(uint8_t *mac);
+  std::string get_eth_mac_address_pretty();
+  eth_duplex_t get_duplex_mode();
+  eth_speed_t get_link_speed();
   bool powerdown();
 
  protected:
@@ -87,8 +98,8 @@ class EthernetComponent : public Component {
   void dump_connect_params_();
   /// @brief Set `RMII Reference Clock Select` bit for KSZ8081.
   void ksz8081_set_clock_reference_(esp_eth_mac_t *mac);
-  /// @brief Set `RMII Mode Setting Register` for RTL8201.
-  void rtl8201_set_rmii_mode_(esp_eth_mac_t *mac);
+  /// @brief Set arbitratry PHY registers from config.
+  void write_phy_register_(esp_eth_mac_t *mac, PHYRegister register_data);
 
   std::string use_address_;
 #ifdef USE_ETHERNET_SPI
@@ -107,6 +118,7 @@ class EthernetComponent : public Component {
   uint8_t mdio_pin_{18};
   emac_rmii_clock_mode_t clk_mode_{EMAC_CLK_EXT_IN};
   emac_rmii_clock_gpio_t clk_gpio_{EMAC_CLK_IN_GPIO};
+  std::vector<PHYRegister> phy_registers_{};
 #endif
   EthernetType type_{ETHERNET_TYPE_UNKNOWN};
   optional<ManualIP> manual_ip_{};
diff --git a/esphome/components/ethernet_info/ethernet_info_text_sensor.cpp b/esphome/components/ethernet_info/ethernet_info_text_sensor.cpp
index c8b2b5885b..329fb9113a 100644
--- a/esphome/components/ethernet_info/ethernet_info_text_sensor.cpp
+++ b/esphome/components/ethernet_info/ethernet_info_text_sensor.cpp
@@ -10,6 +10,7 @@ static const char *const TAG = "ethernet_info";
 
 void IPAddressEthernetInfo::dump_config() { LOG_TEXT_SENSOR("", "EthernetInfo IPAddress", this); }
 void DNSAddressEthernetInfo::dump_config() { LOG_TEXT_SENSOR("", "EthernetInfo DNS Address", this); }
+void MACAddressEthernetInfo::dump_config() { LOG_TEXT_SENSOR("", "EthernetInfo MAC Address", this); }
 
 }  // namespace ethernet_info
 }  // namespace esphome
diff --git a/esphome/components/ethernet_info/ethernet_info_text_sensor.h b/esphome/components/ethernet_info/ethernet_info_text_sensor.h
index 82a7dcf56e..94eed886e5 100644
--- a/esphome/components/ethernet_info/ethernet_info_text_sensor.h
+++ b/esphome/components/ethernet_info/ethernet_info_text_sensor.h
@@ -59,6 +59,13 @@ class DNSAddressEthernetInfo : public PollingComponent, public text_sensor::Text
   std::string last_results_;
 };
 
+class MACAddressEthernetInfo : public Component, public text_sensor::TextSensor {
+ public:
+  void setup() override { this->publish_state(ethernet::global_eth_component->get_eth_mac_address_pretty()); }
+  std::string unique_id() override { return get_mac_address() + "-ethernetinfo-mac"; }
+  void dump_config() override;
+};
+
 }  // namespace ethernet_info
 }  // namespace esphome
 
diff --git a/esphome/components/ethernet_info/text_sensor.py b/esphome/components/ethernet_info/text_sensor.py
index 292673c182..a545475870 100644
--- a/esphome/components/ethernet_info/text_sensor.py
+++ b/esphome/components/ethernet_info/text_sensor.py
@@ -4,6 +4,7 @@ from esphome.components import text_sensor
 from esphome.const import (
     CONF_IP_ADDRESS,
     CONF_DNS_ADDRESS,
+    CONF_MAC_ADDRESS,
     ENTITY_CATEGORY_DIAGNOSTIC,
 )
 
@@ -19,6 +20,10 @@ DNSAddressEthernetInfo = ethernet_info_ns.class_(
     "DNSAddressEthernetInfo", text_sensor.TextSensor, cg.PollingComponent
 )
 
+MACAddressEthernetInfo = ethernet_info_ns.class_(
+    "MACAddressEthernetInfo", text_sensor.TextSensor, cg.PollingComponent
+)
+
 CONFIG_SCHEMA = cv.Schema(
     {
         cv.Optional(CONF_IP_ADDRESS): text_sensor.text_sensor_schema(
@@ -36,6 +41,9 @@ CONFIG_SCHEMA = cv.Schema(
         cv.Optional(CONF_DNS_ADDRESS): text_sensor.text_sensor_schema(
             DNSAddressEthernetInfo, entity_category=ENTITY_CATEGORY_DIAGNOSTIC
         ).extend(cv.polling_component_schema("1s")),
+        cv.Optional(CONF_MAC_ADDRESS): text_sensor.text_sensor_schema(
+            MACAddressEthernetInfo, entity_category=ENTITY_CATEGORY_DIAGNOSTIC
+        ),
     }
 )
 
@@ -51,3 +59,6 @@ async def to_code(config):
     if conf := config.get(CONF_DNS_ADDRESS):
         dns_info = await text_sensor.new_text_sensor(config[CONF_DNS_ADDRESS])
         await cg.register_component(dns_info, config[CONF_DNS_ADDRESS])
+    if conf := config.get(CONF_MAC_ADDRESS):
+        mac_info = await text_sensor.new_text_sensor(config[CONF_MAC_ADDRESS])
+        await cg.register_component(mac_info, config[CONF_MAC_ADDRESS])
diff --git a/esphome/components/ft5x06/touchscreen/__init__.py b/esphome/components/ft5x06/touchscreen/__init__.py
index adeeac0d1a..4ceb50c709 100644
--- a/esphome/components/ft5x06/touchscreen/__init__.py
+++ b/esphome/components/ft5x06/touchscreen/__init__.py
@@ -1,8 +1,9 @@
+from esphome import pins
 import esphome.codegen as cg
 import esphome.config_validation as cv
 
 from esphome.components import i2c, touchscreen
-from esphome.const import CONF_ID
+from esphome.const import CONF_ID, CONF_INTERRUPT_PIN
 from .. import ft5x06_ns
 
 FT5x06ButtonListener = ft5x06_ns.class_("FT5x06ButtonListener")
@@ -16,6 +17,7 @@ FT5x06Touchscreen = ft5x06_ns.class_(
 CONFIG_SCHEMA = touchscreen.TOUCHSCREEN_SCHEMA.extend(
     {
         cv.GenerateID(): cv.declare_id(FT5x06Touchscreen),
+        cv.Optional(CONF_INTERRUPT_PIN): pins.internal_gpio_input_pin_schema,
     }
 ).extend(i2c.i2c_device_schema(0x48))
 
@@ -24,3 +26,7 @@ async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
     await i2c.register_i2c_device(var, config)
     await touchscreen.register_touchscreen(var, config)
+
+    if interrupt_pin := config.get(CONF_INTERRUPT_PIN):
+        pin = await cg.gpio_pin_expression(interrupt_pin)
+        cg.add(var.set_interrupt_pin(pin))
diff --git a/esphome/components/ft5x06/touchscreen/ft5x06_touchscreen.cpp b/esphome/components/ft5x06/touchscreen/ft5x06_touchscreen.cpp
new file mode 100644
index 0000000000..bd603fdc10
--- /dev/null
+++ b/esphome/components/ft5x06/touchscreen/ft5x06_touchscreen.cpp
@@ -0,0 +1,102 @@
+#include "ft5x06_touchscreen.h"
+
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace ft5x06 {
+
+static const char *const TAG = "ft5x06.touchscreen";
+
+void FT5x06Touchscreen::setup() {
+  ESP_LOGCONFIG(TAG, "Setting up FT5x06 Touchscreen...");
+  if (this->interrupt_pin_ != nullptr) {
+    this->interrupt_pin_->setup();
+    this->interrupt_pin_->pin_mode(gpio::FLAG_INPUT | gpio::FLAG_PULLUP);
+    this->interrupt_pin_->setup();
+    this->attach_interrupt_(this->interrupt_pin_, gpio::INTERRUPT_FALLING_EDGE);
+  }
+
+  // wait 200ms after reset.
+  this->set_timeout(200, [this] { this->continue_setup_(); });
+}
+
+void FT5x06Touchscreen::continue_setup_() {
+  uint8_t data[4];
+  if (!this->set_mode_(FT5X06_OP_MODE))
+    return;
+
+  if (!this->err_check_(this->read_register(FT5X06_VENDOR_ID_REG, data, 1), "Read Vendor ID"))
+    return;
+  switch (data[0]) {
+    case FT5X06_ID_1:
+    case FT5X06_ID_2:
+    case FT5X06_ID_3:
+      this->vendor_id_ = (VendorId) data[0];
+      ESP_LOGD(TAG, "Read vendor ID 0x%X", data[0]);
+      break;
+
+    default:
+      ESP_LOGE(TAG, "Unknown vendor ID 0x%X", data[0]);
+      this->mark_failed();
+      return;
+  }
+  // reading the chip registers to get max x/y does not seem to work.
+  if (this->display_ != nullptr) {
+    if (this->x_raw_max_ == this->x_raw_min_) {
+      this->x_raw_max_ = this->display_->get_native_width();
+    }
+    if (this->y_raw_max_ == this->y_raw_min_) {
+      this->y_raw_max_ = this->display_->get_native_height();
+    }
+  }
+  ESP_LOGCONFIG(TAG, "FT5x06 Touchscreen setup complete");
+}
+
+void FT5x06Touchscreen::update_touches() {
+  uint8_t touch_cnt;
+  uint8_t data[MAX_TOUCHES][6];
+
+  if (!this->read_byte(FT5X06_TD_STATUS, &touch_cnt) || touch_cnt > MAX_TOUCHES) {
+    ESP_LOGW(TAG, "Failed to read status");
+    return;
+  }
+  if (touch_cnt == 0)
+    return;
+
+  if (!this->read_bytes(FT5X06_TOUCH_DATA, (uint8_t *) data, touch_cnt * 6)) {
+    ESP_LOGW(TAG, "Failed to read touch data");
+    return;
+  }
+  for (uint8_t i = 0; i != touch_cnt; i++) {
+    uint8_t status = data[i][0] >> 6;
+    uint8_t id = data[i][2] >> 3;
+    uint16_t x = encode_uint16(data[i][0] & 0x0F, data[i][1]);
+    uint16_t y = encode_uint16(data[i][2] & 0xF, data[i][3]);
+
+    ESP_LOGD(TAG, "Read %X status, id: %d, pos %d/%d", status, id, x, y);
+    if (status == 0 || status == 2) {
+      this->add_raw_touch_position_(id, x, y);
+    }
+  }
+}
+
+void FT5x06Touchscreen::dump_config() {
+  ESP_LOGCONFIG(TAG, "FT5x06 Touchscreen:");
+  ESP_LOGCONFIG(TAG, "  Address: 0x%02X", this->address_);
+  ESP_LOGCONFIG(TAG, "  Vendor ID: 0x%X", (int) this->vendor_id_);
+}
+
+bool FT5x06Touchscreen::err_check_(i2c::ErrorCode err, const char *msg) {
+  if (err != i2c::ERROR_OK) {
+    this->mark_failed();
+    ESP_LOGE(TAG, "%s failed - err 0x%X", msg, err);
+    return false;
+  }
+  return true;
+}
+bool FT5x06Touchscreen::set_mode_(FTMode mode) {
+  return this->err_check_(this->write_register(FT5X06_MODE_REG, (uint8_t *) &mode, 1), "Set mode");
+}
+
+}  // namespace ft5x06
+}  // namespace esphome
diff --git a/esphome/components/ft5x06/touchscreen/ft5x06_touchscreen.h b/esphome/components/ft5x06/touchscreen/ft5x06_touchscreen.h
index 7ddd2e44d7..23e5a0c49f 100644
--- a/esphome/components/ft5x06/touchscreen/ft5x06_touchscreen.h
+++ b/esphome/components/ft5x06/touchscreen/ft5x06_touchscreen.h
@@ -3,14 +3,12 @@
 #include "esphome/components/i2c/i2c.h"
 #include "esphome/components/touchscreen/touchscreen.h"
 #include "esphome/core/component.h"
+#include "esphome/core/gpio.h"
 #include "esphome/core/hal.h"
-#include "esphome/core/log.h"
 
 namespace esphome {
 namespace ft5x06 {
 
-static const char *const TAG = "ft5x06.touchscreen";
-
 enum VendorId {
   FT5X06_ID_UNKNOWN = 0,
   FT5X06_ID_1 = 0x51,
@@ -39,91 +37,19 @@ static const size_t MAX_TOUCHES = 5;  // max number of possible touches reported
 
 class FT5x06Touchscreen : public touchscreen::Touchscreen, public i2c::I2CDevice {
  public:
-  void setup() override {
-    esph_log_config(TAG, "Setting up FT5x06 Touchscreen...");
-    // wait 200ms after reset.
-    this->set_timeout(200, [this] { this->continue_setup_(); });
-  }
+  void setup() override;
+  void dump_config() override;
+  void update_touches() override;
 
-  void continue_setup_(void) {
-    uint8_t data[4];
-    if (!this->set_mode_(FT5X06_OP_MODE))
-      return;
-
-    if (!this->err_check_(this->read_register(FT5X06_VENDOR_ID_REG, data, 1), "Read Vendor ID"))
-      return;
-    switch (data[0]) {
-      case FT5X06_ID_1:
-      case FT5X06_ID_2:
-      case FT5X06_ID_3:
-        this->vendor_id_ = (VendorId) data[0];
-        esph_log_d(TAG, "Read vendor ID 0x%X", data[0]);
-        break;
-
-      default:
-        esph_log_e(TAG, "Unknown vendor ID 0x%X", data[0]);
-        this->mark_failed();
-        return;
-    }
-    // reading the chip registers to get max x/y does not seem to work.
-    if (this->display_ != nullptr) {
-      if (this->x_raw_max_ == this->x_raw_min_) {
-        this->x_raw_max_ = this->display_->get_native_width();
-      }
-      if (this->y_raw_max_ == this->y_raw_min_) {
-        this->y_raw_max_ = this->display_->get_native_height();
-      }
-    }
-    esph_log_config(TAG, "FT5x06 Touchscreen setup complete");
-  }
-
-  void update_touches() override {
-    uint8_t touch_cnt;
-    uint8_t data[MAX_TOUCHES][6];
-
-    if (!this->read_byte(FT5X06_TD_STATUS, &touch_cnt) || touch_cnt > MAX_TOUCHES) {
-      esph_log_w(TAG, "Failed to read status");
-      return;
-    }
-    if (touch_cnt == 0)
-      return;
-
-    if (!this->read_bytes(FT5X06_TOUCH_DATA, (uint8_t *) data, touch_cnt * 6)) {
-      esph_log_w(TAG, "Failed to read touch data");
-      return;
-    }
-    for (uint8_t i = 0; i != touch_cnt; i++) {
-      uint8_t status = data[i][0] >> 6;
-      uint8_t id = data[i][2] >> 3;
-      uint16_t x = encode_uint16(data[i][0] & 0x0F, data[i][1]);
-      uint16_t y = encode_uint16(data[i][2] & 0xF, data[i][3]);
-
-      esph_log_d(TAG, "Read %X status, id: %d, pos %d/%d", status, id, x, y);
-      if (status == 0 || status == 2) {
-        this->add_raw_touch_position_(id, x, y);
-      }
-    }
-  }
-
-  void dump_config() override {
-    esph_log_config(TAG, "FT5x06 Touchscreen:");
-    esph_log_config(TAG, "  Address: 0x%02X", this->address_);
-    esph_log_config(TAG, "  Vendor ID: 0x%X", (int) this->vendor_id_);
-  }
+  void set_interrupt_pin(InternalGPIOPin *interrupt_pin) { this->interrupt_pin_ = interrupt_pin; }
 
  protected:
-  bool err_check_(i2c::ErrorCode err, const char *msg) {
-    if (err != i2c::ERROR_OK) {
-      this->mark_failed();
-      esph_log_e(TAG, "%s failed - err 0x%X", msg, err);
-      return false;
-    }
-    return true;
-  }
-  bool set_mode_(FTMode mode) {
-    return this->err_check_(this->write_register(FT5X06_MODE_REG, (uint8_t *) &mode, 1), "Set mode");
-  }
+  void continue_setup_();
+  bool err_check_(i2c::ErrorCode err, const char *msg);
+  bool set_mode_(FTMode mode);
   VendorId vendor_id_{FT5X06_ID_UNKNOWN};
+
+  InternalGPIOPin *interrupt_pin_{nullptr};
 };
 
 }  // namespace ft5x06
diff --git a/esphome/components/host/__init__.py b/esphome/components/host/__init__.py
index 3bd3b6b172..39e418c9ea 100644
--- a/esphome/components/host/__init__.py
+++ b/esphome/components/host/__init__.py
@@ -16,7 +16,7 @@ from .const import KEY_HOST
 # force import gpio to register pin schema
 from .gpio import host_pin_to_code  # noqa
 
-CODEOWNERS = ["@esphome/core"]
+CODEOWNERS = ["@esphome/core", "@clydebarrow"]
 AUTO_LOAD = ["network"]
 
 
diff --git a/esphome/components/host/time/__init__.py b/esphome/components/host/time/__init__.py
new file mode 100644
index 0000000000..76a88d98a1
--- /dev/null
+++ b/esphome/components/host/time/__init__.py
@@ -0,0 +1,20 @@
+import esphome.codegen as cg
+from esphome.const import CONF_ID
+import esphome.config_validation as cv
+from esphome.components import time as time_
+
+CODEOWNERS = ["@clydebarrow"]
+
+time_ns = cg.esphome_ns.namespace("host")
+HostTime = time_ns.class_("HostTime", time_.RealTimeClock)
+CONFIG_SCHEMA = time_.TIME_SCHEMA.extend(
+    {
+        cv.GenerateID(): cv.declare_id(HostTime),
+    }
+).extend(cv.COMPONENT_SCHEMA)
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+    await time_.register_time(var, config)
diff --git a/esphome/components/host/time/host_time.h b/esphome/components/host/time/host_time.h
new file mode 100644
index 0000000000..4f1473b809
--- /dev/null
+++ b/esphome/components/host/time/host_time.h
@@ -0,0 +1,15 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/components/time/real_time_clock.h"
+
+namespace esphome {
+namespace host {
+
+class HostTime : public time::RealTimeClock {
+ public:
+  void update() override {}
+};
+
+}  // namespace host
+}  // namespace esphome
diff --git a/esphome/components/improv_serial/improv_serial_component.cpp b/esphome/components/improv_serial/improv_serial_component.cpp
index 40297bee68..2937720496 100644
--- a/esphome/components/improv_serial/improv_serial_component.cpp
+++ b/esphome/components/improv_serial/improv_serial_component.cpp
@@ -109,6 +109,7 @@ void ImprovSerialComponent::write_data_(std::vector<uint8_t> &data) {
 #if defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32C6) || defined(USE_ESP32_VARIANT_ESP32S3)
     case logger::UART_SELECTION_USB_SERIAL_JTAG:
       usb_serial_jtag_write_bytes((char *) data.data(), data.size(), 20 / portTICK_PERIOD_MS);
+      usb_serial_jtag_ll_txfifo_flush();  // fixes for issue in IDF 4.4.7
       break;
 #endif  // USE_ESP32_VARIANT_ESP32C3 || USE_ESP32_VARIANT_ESP32S3
     default:
diff --git a/esphome/components/improv_serial/improv_serial_component.h b/esphome/components/improv_serial/improv_serial_component.h
index 8583d0762b..f737f93d86 100644
--- a/esphome/components/improv_serial/improv_serial_component.h
+++ b/esphome/components/improv_serial/improv_serial_component.h
@@ -17,6 +17,7 @@
 #if defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32C6) || defined(USE_ESP32_VARIANT_ESP32S3) || \
     defined(USE_ESP32_VARIANT_ESP32H2)
 #include <driver/usb_serial_jtag.h>
+#include <hal/usb_serial_jtag_ll.h>
 #endif
 #if defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3)
 #include <esp_private/usb_console.h>
diff --git a/esphome/components/remote_base/__init__.py b/esphome/components/remote_base/__init__.py
index 9d49026aa3..3d1c10a092 100644
--- a/esphome/components/remote_base/__init__.py
+++ b/esphome/components/remote_base/__init__.py
@@ -1769,7 +1769,17 @@ def aeha_dumper(var, config):
     pass
 
 
-@register_action("aeha", AEHAAction, AEHA_SCHEMA)
+@register_action(
+    "aeha",
+    AEHAAction,
+    AEHA_SCHEMA.extend(
+        {
+            cv.Optional(CONF_CARRIER_FREQUENCY, default="38000Hz"): cv.All(
+                cv.frequency, cv.int_
+            ),
+        }
+    ),
+)
 async def aeha_action(var, config, args):
     template_ = await cg.templatable(config[CONF_ADDRESS], args, cg.uint16)
     cg.add(var.set_address(template_))
@@ -1777,6 +1787,8 @@ async def aeha_action(var, config, args):
         config[CONF_DATA], args, cg.std_vector.template(cg.uint8)
     )
     cg.add(var.set_data(template_))
+    templ = await cg.templatable(config[CONF_CARRIER_FREQUENCY], args, cg.uint32)
+    cg.add(var.set_carrier_frequency(templ))
 
 
 # Haier
diff --git a/esphome/components/remote_base/aeha_protocol.cpp b/esphome/components/remote_base/aeha_protocol.cpp
index 40bdadf634..04fe731817 100644
--- a/esphome/components/remote_base/aeha_protocol.cpp
+++ b/esphome/components/remote_base/aeha_protocol.cpp
@@ -16,7 +16,6 @@ static const uint16_t BIT_ZERO_LOW_US = BITWISE;
 static const uint16_t TRAILER = BITWISE;
 
 void AEHAProtocol::encode(RemoteTransmitData *dst, const AEHAData &data) {
-  dst->set_carrier_frequency(38000);
   dst->reserve(2 + 32 + (data.data.size() * 2) + 1);
 
   dst->item(HEADER_HIGH_US, HEADER_LOW_US);
diff --git a/esphome/components/remote_base/aeha_protocol.h b/esphome/components/remote_base/aeha_protocol.h
index c41f3f8df1..51718eefcb 100644
--- a/esphome/components/remote_base/aeha_protocol.h
+++ b/esphome/components/remote_base/aeha_protocol.h
@@ -30,12 +30,14 @@ template<typename... Ts> class AEHAAction : public RemoteTransmitterActionBase<T
  public:
   TEMPLATABLE_VALUE(uint16_t, address)
   TEMPLATABLE_VALUE(std::vector<uint8_t>, data)
+  TEMPLATABLE_VALUE(uint32_t, carrier_frequency);
 
   void set_data(const std::vector<uint8_t> &data) { data_ = data; }
   void encode(RemoteTransmitData *dst, Ts... x) override {
     AEHAData data{};
     data.address = this->address_.value(x...);
     data.data = this->data_.value(x...);
+    dst->set_carrier_frequency(this->carrier_frequency_.value(x...));
     AEHAProtocol().encode(dst, data);
   }
 };
diff --git a/esphome/components/sntp/sntp_component.cpp b/esphome/components/sntp/sntp_component.cpp
index a0e791be75..4ded98d483 100644
--- a/esphome/components/sntp/sntp_component.cpp
+++ b/esphome/components/sntp/sntp_component.cpp
@@ -20,7 +20,6 @@ namespace sntp {
 static const char *const TAG = "sntp";
 
 void SNTPComponent::setup() {
-#ifndef USE_HOST
   ESP_LOGCONFIG(TAG, "Setting up SNTP...");
 #if defined(USE_ESP_IDF)
   if (esp_sntp_enabled()) {
@@ -44,7 +43,6 @@ void SNTPComponent::setup() {
 #endif
 
   sntp_init();
-#endif
 }
 void SNTPComponent::dump_config() {
   ESP_LOGCONFIG(TAG, "SNTP Time:");
@@ -54,7 +52,7 @@ void SNTPComponent::dump_config() {
   ESP_LOGCONFIG(TAG, "  Timezone: '%s'", this->timezone_.c_str());
 }
 void SNTPComponent::update() {
-#if !defined(USE_ESP_IDF) && !defined(USE_HOST)
+#if !defined(USE_ESP_IDF)
   // force resync
   if (sntp_enabled()) {
     sntp_stop();
diff --git a/esphome/components/sntp/time.py b/esphome/components/sntp/time.py
index b1362f5421..7cc82e3dff 100644
--- a/esphome/components/sntp/time.py
+++ b/esphome/components/sntp/time.py
@@ -2,24 +2,41 @@ from esphome.components import time as time_
 import esphome.config_validation as cv
 import esphome.codegen as cg
 from esphome.core import CORE
-from esphome.const import CONF_ID, CONF_SERVERS
-
+from esphome.const import (
+    CONF_ID,
+    CONF_SERVERS,
+    PLATFORM_ESP32,
+    PLATFORM_ESP8266,
+    PLATFORM_RP2040,
+    PLATFORM_RTL87XX,
+    PLATFORM_BK72XX,
+)
 
 DEPENDENCIES = ["network"]
 sntp_ns = cg.esphome_ns.namespace("sntp")
 SNTPComponent = sntp_ns.class_("SNTPComponent", time_.RealTimeClock)
 
-
 DEFAULT_SERVERS = ["0.pool.ntp.org", "1.pool.ntp.org", "2.pool.ntp.org"]
 
-CONFIG_SCHEMA = time_.TIME_SCHEMA.extend(
-    {
-        cv.GenerateID(): cv.declare_id(SNTPComponent),
-        cv.Optional(CONF_SERVERS, default=DEFAULT_SERVERS): cv.All(
-            cv.ensure_list(cv.Any(cv.domain, cv.hostname)), cv.Length(min=1, max=3)
-        ),
-    }
-).extend(cv.COMPONENT_SCHEMA)
+CONFIG_SCHEMA = cv.All(
+    time_.TIME_SCHEMA.extend(
+        {
+            cv.GenerateID(): cv.declare_id(SNTPComponent),
+            cv.Optional(CONF_SERVERS, default=DEFAULT_SERVERS): cv.All(
+                cv.ensure_list(cv.Any(cv.domain, cv.hostname)), cv.Length(min=1, max=3)
+            ),
+        }
+    ).extend(cv.COMPONENT_SCHEMA),
+    cv.only_on(
+        [
+            PLATFORM_ESP32,
+            PLATFORM_ESP8266,
+            PLATFORM_RP2040,
+            PLATFORM_BK72XX,
+            PLATFORM_RTL87XX,
+        ]
+    ),
+)
 
 
 async def to_code(config):
diff --git a/esphome/components/tuya/climate/__init__.py b/esphome/components/tuya/climate/__init__.py
index 56eb377ed7..363e7c764b 100644
--- a/esphome/components/tuya/climate/__init__.py
+++ b/esphome/components/tuya/climate/__init__.py
@@ -189,8 +189,6 @@ CONFIG_SCHEMA = cv.All(
     cv.has_at_least_one_key(CONF_TARGET_TEMPERATURE_DATAPOINT, CONF_SWITCH_DATAPOINT),
     validate_temperature_multipliers,
     validate_cooling_values,
-    cv.has_at_most_one_key(CONF_ACTIVE_STATE, CONF_HEATING_STATE_PIN),
-    cv.has_at_most_one_key(CONF_ACTIVE_STATE, CONF_COOLING_STATE_PIN),
 )
 
 
@@ -207,6 +205,12 @@ async def to_code(config):
     if switch_datapoint := config.get(CONF_SWITCH_DATAPOINT):
         cg.add(var.set_switch_id(switch_datapoint))
 
+    if heating_state_pin_config := config.get(CONF_HEATING_STATE_PIN):
+        heating_state_pin = await cg.gpio_pin_expression(heating_state_pin_config)
+        cg.add(var.set_heating_state_pin(heating_state_pin))
+    if cooling_state_pin_config := config.get(CONF_COOLING_STATE_PIN):
+        cooling_state_pin = await cg.gpio_pin_expression(cooling_state_pin_config)
+        cg.add(var.set_cooling_state_pin(cooling_state_pin))
     if active_state_config := config.get(CONF_ACTIVE_STATE):
         cg.add(var.set_active_state_id(active_state_config.get(CONF_DATAPOINT)))
         if (heating_value := active_state_config.get(CONF_HEATING_VALUE)) is not None:
@@ -217,13 +221,6 @@ async def to_code(config):
             cg.add(var.set_active_state_drying_value(drying_value))
         if (fanonly_value := active_state_config.get(CONF_FANONLY_VALUE)) is not None:
             cg.add(var.set_active_state_fanonly_value(fanonly_value))
-    else:
-        if heating_state_pin_config := config.get(CONF_HEATING_STATE_PIN):
-            heating_state_pin = await cg.gpio_pin_expression(heating_state_pin_config)
-            cg.add(var.set_heating_state_pin(heating_state_pin))
-        if cooling_state_pin_config := config.get(CONF_COOLING_STATE_PIN):
-            cooling_state_pin = await cg.gpio_pin_expression(cooling_state_pin_config)
-            cg.add(var.set_cooling_state_pin(cooling_state_pin))
 
     if target_temperature_datapoint := config.get(CONF_TARGET_TEMPERATURE_DATAPOINT):
         cg.add(var.set_target_temperature_id(target_temperature_datapoint))
diff --git a/esphome/components/tuya/climate/tuya_climate.cpp b/esphome/components/tuya/climate/tuya_climate.cpp
index 274e19a69e..7827a4e3ab 100644
--- a/esphome/components/tuya/climate/tuya_climate.cpp
+++ b/esphome/components/tuya/climate/tuya_climate.cpp
@@ -24,6 +24,14 @@ void TuyaClimate::setup() {
       this->publish_state();
     });
   }
+  if (this->heating_state_pin_ != nullptr) {
+    this->heating_state_pin_->setup();
+    this->heating_state_ = this->heating_state_pin_->digital_read();
+  }
+  if (this->cooling_state_pin_ != nullptr) {
+    this->cooling_state_pin_->setup();
+    this->cooling_state_ = this->cooling_state_pin_->digital_read();
+  }
   if (this->active_state_id_.has_value()) {
     this->parent_->register_listener(*this->active_state_id_, [this](const TuyaDatapoint &datapoint) {
       ESP_LOGV(TAG, "MCU reported active state is: %u", datapoint.value_enum);
@@ -31,15 +39,6 @@ void TuyaClimate::setup() {
       this->compute_state_();
       this->publish_state();
     });
-  } else {
-    if (this->heating_state_pin_ != nullptr) {
-      this->heating_state_pin_->setup();
-      this->heating_state_ = this->heating_state_pin_->digital_read();
-    }
-    if (this->cooling_state_pin_ != nullptr) {
-      this->cooling_state_pin_->setup();
-      this->cooling_state_ = this->cooling_state_pin_->digital_read();
-    }
   }
   if (this->target_temperature_id_.has_value()) {
     this->parent_->register_listener(*this->target_temperature_id_, [this](const TuyaDatapoint &datapoint) {
@@ -113,9 +112,6 @@ void TuyaClimate::setup() {
 }
 
 void TuyaClimate::loop() {
-  if (this->active_state_id_.has_value())
-    return;
-
   bool state_changed = false;
   if (this->heating_state_pin_ != nullptr) {
     bool heating_state = this->heating_state_pin_->digital_read();
@@ -147,14 +143,18 @@ void TuyaClimate::control(const climate::ClimateCall &call) {
     this->parent_->set_boolean_datapoint_value(*this->switch_id_, switch_state);
     const climate::ClimateMode new_mode = *call.get_mode();
 
-    if (new_mode == climate::CLIMATE_MODE_HEAT && this->supports_heat_) {
-      this->parent_->set_enum_datapoint_value(*this->active_state_id_, *this->active_state_heating_value_);
-    } else if (new_mode == climate::CLIMATE_MODE_COOL && this->supports_cool_) {
-      this->parent_->set_enum_datapoint_value(*this->active_state_id_, *this->active_state_cooling_value_);
-    } else if (new_mode == climate::CLIMATE_MODE_DRY && this->active_state_drying_value_.has_value()) {
-      this->parent_->set_enum_datapoint_value(*this->active_state_id_, *this->active_state_drying_value_);
-    } else if (new_mode == climate::CLIMATE_MODE_FAN_ONLY && this->active_state_fanonly_value_.has_value()) {
-      this->parent_->set_enum_datapoint_value(*this->active_state_id_, *this->active_state_fanonly_value_);
+    if (this->active_state_id_.has_value()) {
+      if (new_mode == climate::CLIMATE_MODE_HEAT && this->supports_heat_) {
+        this->parent_->set_enum_datapoint_value(*this->active_state_id_, *this->active_state_heating_value_);
+      } else if (new_mode == climate::CLIMATE_MODE_COOL && this->supports_cool_) {
+        this->parent_->set_enum_datapoint_value(*this->active_state_id_, *this->active_state_cooling_value_);
+      } else if (new_mode == climate::CLIMATE_MODE_DRY && this->active_state_drying_value_.has_value()) {
+        this->parent_->set_enum_datapoint_value(*this->active_state_id_, *this->active_state_drying_value_);
+      } else if (new_mode == climate::CLIMATE_MODE_FAN_ONLY && this->active_state_fanonly_value_.has_value()) {
+        this->parent_->set_enum_datapoint_value(*this->active_state_id_, *this->active_state_fanonly_value_);
+      }
+    } else {
+      ESP_LOGW(TAG, "Active state (mode) datapoint not configured");
     }
   }
 
@@ -422,7 +422,32 @@ void TuyaClimate::compute_state_() {
   }
 
   climate::ClimateAction target_action = climate::CLIMATE_ACTION_IDLE;
-  if (this->active_state_id_.has_value()) {
+  if (this->heating_state_pin_ != nullptr || this->cooling_state_pin_ != nullptr) {
+    // Use state from input pins
+    if (this->heating_state_) {
+      target_action = climate::CLIMATE_ACTION_HEATING;
+      this->mode = climate::CLIMATE_MODE_HEAT;
+    } else if (this->cooling_state_) {
+      target_action = climate::CLIMATE_ACTION_COOLING;
+      this->mode = climate::CLIMATE_MODE_COOL;
+    }
+    if (this->active_state_id_.has_value()) {
+      // Both are available, use MCU datapoint as mode
+      if (this->supports_heat_ && this->active_state_heating_value_.has_value() &&
+          this->active_state_ == this->active_state_heating_value_) {
+        this->mode = climate::CLIMATE_MODE_HEAT;
+      } else if (this->supports_cool_ && this->active_state_cooling_value_.has_value() &&
+                 this->active_state_ == this->active_state_cooling_value_) {
+        this->mode = climate::CLIMATE_MODE_COOL;
+      } else if (this->active_state_drying_value_.has_value() &&
+                 this->active_state_ == this->active_state_drying_value_) {
+        this->mode = climate::CLIMATE_MODE_DRY;
+      } else if (this->active_state_fanonly_value_.has_value() &&
+                 this->active_state_ == this->active_state_fanonly_value_) {
+        this->mode = climate::CLIMATE_MODE_FAN_ONLY;
+      }
+    }
+  } else if (this->active_state_id_.has_value()) {
     // Use state from MCU datapoint
     if (this->supports_heat_ && this->active_state_heating_value_.has_value() &&
         this->active_state_ == this->active_state_heating_value_) {
@@ -441,15 +466,6 @@ void TuyaClimate::compute_state_() {
       target_action = climate::CLIMATE_ACTION_FAN;
       this->mode = climate::CLIMATE_MODE_FAN_ONLY;
     }
-  } else if (this->heating_state_pin_ != nullptr || this->cooling_state_pin_ != nullptr) {
-    // Use state from input pins
-    if (this->heating_state_) {
-      target_action = climate::CLIMATE_ACTION_HEATING;
-      this->mode = climate::CLIMATE_MODE_HEAT;
-    } else if (this->cooling_state_) {
-      target_action = climate::CLIMATE_ACTION_COOLING;
-      this->mode = climate::CLIMATE_MODE_COOL;
-    }
   } else {
     // Fallback to active state calc based on temp and hysteresis
     const float temp_diff = this->target_temperature - this->current_temperature;
diff --git a/esphome/components/tuya/cover/__init__.py b/esphome/components/tuya/cover/__init__.py
index f886c7030f..2dd66f814d 100644
--- a/esphome/components/tuya/cover/__init__.py
+++ b/esphome/components/tuya/cover/__init__.py
@@ -16,6 +16,7 @@ CONF_DIRECTION_DATAPOINT = "direction_datapoint"
 CONF_POSITION_DATAPOINT = "position_datapoint"
 CONF_POSITION_REPORT_DATAPOINT = "position_report_datapoint"
 CONF_INVERT_POSITION = "invert_position"
+CONF_INVERT_POSITION_REPORT = "invert_position_report"
 
 TuyaCover = tuya_ns.class_("TuyaCover", cover.Cover, cg.Component)
 
@@ -47,6 +48,7 @@ CONFIG_SCHEMA = cv.All(
             cv.Optional(CONF_MIN_VALUE, default=0): cv.int_,
             cv.Optional(CONF_MAX_VALUE, default=100): cv.int_,
             cv.Optional(CONF_INVERT_POSITION, default=False): cv.boolean,
+            cv.Optional(CONF_INVERT_POSITION_REPORT, default=False): cv.boolean,
             cv.Optional(CONF_RESTORE_MODE, default="RESTORE"): cv.enum(
                 RESTORE_MODES, upper=True
             ),
@@ -71,6 +73,7 @@ async def to_code(config):
     cg.add(var.set_min_value(config[CONF_MIN_VALUE]))
     cg.add(var.set_max_value(config[CONF_MAX_VALUE]))
     cg.add(var.set_invert_position(config[CONF_INVERT_POSITION]))
+    cg.add(var.set_invert_position_report(config[CONF_INVERT_POSITION_REPORT]))
     cg.add(var.set_restore_mode(config[CONF_RESTORE_MODE]))
     paren = await cg.get_variable(config[CONF_TUYA_ID])
     cg.add(var.set_tuya_parent(paren))
diff --git a/esphome/components/tuya/cover/tuya_cover.cpp b/esphome/components/tuya/cover/tuya_cover.cpp
index fcb961f45e..14bf937cf7 100644
--- a/esphome/components/tuya/cover/tuya_cover.cpp
+++ b/esphome/components/tuya/cover/tuya_cover.cpp
@@ -51,7 +51,7 @@ void TuyaCover::setup() {
       return;
     }
     auto pos = float(datapoint.value_uint - this->min_value_) / this->value_range_;
-    this->position = 1.0f - pos;
+    this->position = this->invert_position_report_ ? pos : 1.0f - pos;
     this->publish_state();
   });
 }
@@ -62,7 +62,7 @@ void TuyaCover::control(const cover::CoverCall &call) {
       this->parent_->force_set_enum_datapoint_value(*this->control_id_, COMMAND_STOP);
     } else {
       auto pos = this->position;
-      pos = 1.0f - pos;
+      pos = this->invert_position_report_ ? pos : 1.0f - pos;
       auto position_int = static_cast<uint32_t>(pos * this->value_range_);
       position_int = position_int + this->min_value_;
 
@@ -78,7 +78,7 @@ void TuyaCover::control(const cover::CoverCall &call) {
         this->parent_->force_set_enum_datapoint_value(*this->control_id_, COMMAND_CLOSE);
       }
     } else {
-      pos = 1.0f - pos;
+      pos = this->invert_position_report_ ? pos : 1.0f - pos;
       auto position_int = static_cast<uint32_t>(pos * this->value_range_);
       position_int = position_int + this->min_value_;
 
@@ -112,6 +112,9 @@ void TuyaCover::dump_config() {
       ESP_LOGCONFIG(TAG, "   Configured as Inverted, but direction_datapoint isn't configured");
     }
   }
+  if (this->invert_position_report_) {
+    ESP_LOGCONFIG(TAG, "   Position Reporting Inverted");
+  }
   if (this->control_id_.has_value()) {
     ESP_LOGCONFIG(TAG, "   Control has datapoint ID %u", *this->control_id_);
   }
diff --git a/esphome/components/tuya/cover/tuya_cover.h b/esphome/components/tuya/cover/tuya_cover.h
index 87c72b0e66..bb5a00bc59 100644
--- a/esphome/components/tuya/cover/tuya_cover.h
+++ b/esphome/components/tuya/cover/tuya_cover.h
@@ -25,6 +25,7 @@ class TuyaCover : public cover::Cover, public Component {
   void set_min_value(uint32_t min_value) { min_value_ = min_value; }
   void set_max_value(uint32_t max_value) { max_value_ = max_value; }
   void set_invert_position(bool invert_position) { invert_position_ = invert_position; }
+  void set_invert_position_report(bool invert_position_report) { invert_position_report_ = invert_position_report; }
   void set_restore_mode(TuyaCoverRestoreMode restore_mode) { restore_mode_ = restore_mode; }
 
  protected:
@@ -42,6 +43,7 @@ class TuyaCover : public cover::Cover, public Component {
   uint32_t max_value_;
   uint32_t value_range_;
   bool invert_position_;
+  bool invert_position_report_;
 };
 
 }  // namespace tuya
diff --git a/esphome/components/wireguard/__init__.py b/esphome/components/wireguard/__init__.py
index 177ad6d356..5d5f620b51 100644
--- a/esphome/components/wireguard/__init__.py
+++ b/esphome/components/wireguard/__init__.py
@@ -7,7 +7,10 @@ from esphome.const import (
     CONF_TIME_ID,
     CONF_ADDRESS,
     CONF_REBOOT_TIMEOUT,
+    KEY_CORE,
+    KEY_FRAMEWORK_VERSION,
 )
+from esphome.components.esp32 import CORE, add_idf_sdkconfig_option
 from esphome.components import time
 from esphome.core import TimePeriod
 from esphome import automation
@@ -117,6 +120,13 @@ async def to_code(config):
     if config[CONF_REQUIRE_CONNECTION_TO_PROCEED]:
         cg.add(var.disable_auto_proceed())
 
+    # Workaround for crash on IDF 5+
+    # See https://github.com/trombik/esp_wireguard/issues/33#issuecomment-1568503651
+    if CORE.using_esp_idf and CORE.data[KEY_CORE][KEY_FRAMEWORK_VERSION] >= cv.Version(
+        5, 0, 0
+    ):
+        add_idf_sdkconfig_option("CONFIG_LWIP_PPP_SUPPORT", True)
+
     # This flag is added here because the esp_wireguard library statically
     # set the size of its allowed_ips list at compile time using this value;
     # the '+1' modifier is relative to the device's own address that will
diff --git a/script/setup b/script/setup
index 1a18a6a9ea..aeb1b39bc1 100755
--- a/script/setup
+++ b/script/setup
@@ -13,11 +13,6 @@ if [ ! -n "$DEVCONTAINER" ] && [ ! -n "$VIRTUAL_ENV" ] && [ ! "$ESPHOME_NO_VENV"
   source $location
 fi
 
-# Avoid unsafe git error when running inside devcontainer
-if [ -n "$DEVCONTAINER" ]; then
-  git config --global --add safe.directory "$PWD"
-fi
-
 pip3 install -r requirements.txt -r requirements_optional.txt -r requirements_test.txt -r requirements_dev.txt
 pip3 install setuptools wheel
 pip3 install -e ".[dev,test,displays]" --config-settings editable_mode=compat
diff --git a/tests/components/ethernet_info/common.yaml b/tests/components/ethernet_info/common.yaml
index dade4d7ca5..d9a6f515b1 100644
--- a/tests/components/ethernet_info/common.yaml
+++ b/tests/components/ethernet_info/common.yaml
@@ -17,3 +17,5 @@ text_sensor:
       name: IP Address
     dns_address:
       name: DNS Address
+    mac_address:
+      name: MAC Address
diff --git a/tests/components/host/common.yaml b/tests/components/host/common.yaml
index 3d14c190a6..fca0c5d597 100644
--- a/tests/components/host/common.yaml
+++ b/tests/components/host/common.yaml
@@ -1,15 +1,10 @@
 time:
-  - platform: sntp
+  - platform: host
     id: esptime
     timezone: Australia/Sydney
 
 logger:
   level: VERBOSE
-  logs:
-    lvgl: INFO
-    display: DEBUG
-    sensor: INFO
-    vnc: DEBUG
 
 host:
   mac_address: "62:23:45:AF:B3:DD"
diff --git a/tests/components/remote_transmitter/common-buttons.yaml b/tests/components/remote_transmitter/common-buttons.yaml
index e727017e85..c6a2453b20 100644
--- a/tests/components/remote_transmitter/common-buttons.yaml
+++ b/tests/components/remote_transmitter/common-buttons.yaml
@@ -118,6 +118,7 @@ button:
     on_press:
       remote_transmitter.transmit_aeha:
         address: 0x8008
+        carrier_frequency: 36700Hz
         data:
           [
             0x00,
diff --git a/tests/components/sntp/test.bk72xx.yaml b/tests/components/sntp/test.bk72xx.yaml
new file mode 100644
index 0000000000..dade44d145
--- /dev/null
+++ b/tests/components/sntp/test.bk72xx.yaml
@@ -0,0 +1 @@
+<<: !include common.yaml
diff --git a/tests/test1.yaml b/tests/test1.yaml
index 2a20a1bb45..c49ff307e5 100644
--- a/tests/test1.yaml
+++ b/tests/test1.yaml
@@ -2906,6 +2906,7 @@ switch:
     turn_on_action:
       remote_transmitter.transmit_aeha:
         address: 0x8008
+        carrier_frequency: 36700Hz
         data:
           [
             0x00,