mirror of
https://github.com/esphome/esphome.git
synced 2024-12-22 05:24:53 +01:00
[CI] Remove old test yaml files (#7002)
This commit is contained in:
Keith Burzinski
GitHub
parent
9a26cdb336
commit
e23153d090
15 changed files with 0 additions and 10704 deletions
|
|
@ -1,232 +0,0 @@
|
|||
---
|
||||
substitutions:
|
||||
devicename: test1_1
|
||||
sensorname: my
|
||||
textname: template
|
||||
roomname: fastled_room
|
||||
|
||||
esphome:
|
||||
name: test1-1
|
||||
name_add_mac_suffix: true
|
||||
platform: ESP32
|
||||
board: nodemcu-32s
|
||||
platformio_options:
|
||||
board_build.partitions: huge_app.csv
|
||||
on_loop:
|
||||
then:
|
||||
- light.addressable_set:
|
||||
id: addr1
|
||||
range_from: 0
|
||||
range_to: 100
|
||||
red: 100%
|
||||
green: !lambda "return 255;"
|
||||
blue: 0%
|
||||
white: 100%
|
||||
|
||||
wled:
|
||||
|
||||
wifi:
|
||||
networks:
|
||||
- ssid: "MySSID"
|
||||
password: "password1"
|
||||
|
||||
uart:
|
||||
- id: adalight_uart
|
||||
tx_pin: GPIO25
|
||||
rx_pin: GPIO26
|
||||
baud_rate: 115200
|
||||
rx_buffer_size: 1024
|
||||
|
||||
adalight:
|
||||
|
||||
network:
|
||||
|
||||
e131:
|
||||
|
||||
power_supply:
|
||||
- id: atx_power_supply
|
||||
enable_time: 20ms
|
||||
keep_on_time: 10s
|
||||
enable_on_boot: true
|
||||
pin:
|
||||
number: 13
|
||||
inverted: true
|
||||
|
||||
i2c:
|
||||
sda: 21
|
||||
scl:
|
||||
number: 22
|
||||
allow_other_uses: true
|
||||
scan: true
|
||||
frequency: 100kHz
|
||||
setup_priority: -100
|
||||
id: i2c_bus
|
||||
|
||||
pca9685:
|
||||
frequency: 500
|
||||
address: 0x0
|
||||
i2c_id: i2c_bus
|
||||
|
||||
output:
|
||||
- platform: pca9685
|
||||
id: pca_0
|
||||
channel: 0
|
||||
- platform: pca9685
|
||||
id: pca_1
|
||||
channel: 1
|
||||
- platform: pca9685
|
||||
id: pca_2
|
||||
channel: 2
|
||||
|
||||
light:
|
||||
- platform: rgb
|
||||
name: Living Room Lights
|
||||
id: ${roomname}_lights
|
||||
red: pca_0
|
||||
green: pca_1
|
||||
blue: pca_2
|
||||
- platform: fastled_clockless
|
||||
id: addr1
|
||||
chipset: WS2811
|
||||
pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO23
|
||||
num_leds: 60
|
||||
rgb_order: BRG
|
||||
max_refresh_rate: 20ms
|
||||
power_supply: atx_power_supply
|
||||
color_correct: [75%, 100%, 50%]
|
||||
name: FastLED WS2811 Light
|
||||
effects:
|
||||
- addressable_color_wipe:
|
||||
- addressable_color_wipe:
|
||||
name: Color Wipe Effect With Custom Values
|
||||
colors:
|
||||
- red: 100%
|
||||
green: 100%
|
||||
blue: 100%
|
||||
num_leds: 1
|
||||
- red: 0%
|
||||
green: 0%
|
||||
blue: 0%
|
||||
num_leds: 1
|
||||
add_led_interval: 100ms
|
||||
reverse: false
|
||||
- addressable_scan:
|
||||
- addressable_scan:
|
||||
name: Scan Effect With Custom Values
|
||||
move_interval: 100ms
|
||||
- addressable_twinkle:
|
||||
- addressable_twinkle:
|
||||
name: Twinkle Effect With Custom Values
|
||||
twinkle_probability: 5%
|
||||
progress_interval: 4ms
|
||||
- addressable_random_twinkle:
|
||||
- addressable_random_twinkle:
|
||||
name: Random Twinkle Effect With Custom Values
|
||||
twinkle_probability: 5%
|
||||
progress_interval: 32ms
|
||||
- addressable_fireworks:
|
||||
- addressable_fireworks:
|
||||
name: Fireworks Effect With Custom Values
|
||||
update_interval: 32ms
|
||||
spark_probability: 10%
|
||||
use_random_color: false
|
||||
fade_out_rate: 120
|
||||
- addressable_flicker:
|
||||
- addressable_flicker:
|
||||
name: Flicker Effect With Custom Values
|
||||
update_interval: 16ms
|
||||
intensity: 5%
|
||||
- addressable_lambda:
|
||||
name: Test For Custom Lambda Effect
|
||||
lambda: |-
|
||||
if (initial_run) {
|
||||
it[0] = current_color;
|
||||
}
|
||||
|
||||
- wled:
|
||||
port: 11111
|
||||
|
||||
- adalight:
|
||||
uart_id: adalight_uart
|
||||
|
||||
- e131:
|
||||
universe: 1
|
||||
|
||||
- automation:
|
||||
name: Custom Effect
|
||||
sequence:
|
||||
- light.addressable_set:
|
||||
id: addr1
|
||||
red: 100%
|
||||
green: 100%
|
||||
blue: 0%
|
||||
- delay: 100ms
|
||||
- light.addressable_set:
|
||||
id: addr1
|
||||
red: 0%
|
||||
green: 100%
|
||||
blue: 0%
|
||||
|
||||
- platform: fastled_spi
|
||||
id: addr2
|
||||
chipset: WS2801
|
||||
data_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO23
|
||||
clock_pin:
|
||||
number: GPIO22
|
||||
allow_other_uses: true
|
||||
data_rate: 2MHz
|
||||
num_leds: 60
|
||||
rgb_order: BRG
|
||||
name: FastLED SPI Light
|
||||
- platform: neopixelbus
|
||||
id: addr3
|
||||
name: Neopixelbus Light
|
||||
gamma_correct: 2.8
|
||||
color_correct: [0.0, 0.0, 0.0, 0.0]
|
||||
default_transition_length: 10s
|
||||
power_supply: atx_power_supply
|
||||
effects:
|
||||
- addressable_flicker:
|
||||
name: Flicker Effect With Custom Values
|
||||
update_interval: 16ms
|
||||
intensity: 5%
|
||||
type: GRBW
|
||||
variant: SK6812
|
||||
method: ESP32_I2S_0
|
||||
num_leds: 60
|
||||
pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO23
|
||||
- platform: partition
|
||||
name: Partition Light
|
||||
segments:
|
||||
- id: addr1
|
||||
from: 0
|
||||
to: 0
|
||||
- id: addr2
|
||||
from: 1
|
||||
to: 10
|
||||
- id: addr2
|
||||
from: 20
|
||||
to: 25
|
||||
- single_light_id: ${roomname}_lights
|
||||
|
||||
canbus:
|
||||
- platform: esp32_can
|
||||
id: esp32_internal_can
|
||||
rx_pin: GPIO04
|
||||
tx_pin: GPIO05
|
||||
can_id: 4
|
||||
bit_rate: 50kbps
|
||||
|
||||
button:
|
||||
- platform: template
|
||||
name: Canbus Actions
|
||||
on_press:
|
||||
- canbus.send: "abc"
|
||||
- canbus.send: [0, 1, 2]
|
||||
- canbus.send: !lambda return {0, 1, 2};
|
||||
4427
tests/test1.yaml
4427
tests/test1.yaml
File diff suppressed because it is too large
Load diff
|
|
@ -1,809 +0,0 @@
|
|||
---
|
||||
# copy of test5.yaml configured to build on IDF 5
|
||||
esphome:
|
||||
name: test11-5
|
||||
build_path: build/test11.5
|
||||
project:
|
||||
name: esphome.test11_5_project
|
||||
version: "1.0.0"
|
||||
|
||||
esp32:
|
||||
board: nodemcu-32s
|
||||
framework:
|
||||
type: esp-idf
|
||||
version: 5.0.2
|
||||
platform_version: 6.3.2
|
||||
advanced:
|
||||
ignore_efuse_mac_crc: true
|
||||
|
||||
wifi:
|
||||
networks:
|
||||
- ssid: "MySSID"
|
||||
password: "password1"
|
||||
manual_ip:
|
||||
static_ip: 192.168.1.23
|
||||
gateway: 192.168.1.1
|
||||
subnet: 255.255.255.0
|
||||
|
||||
network:
|
||||
enable_ipv6: true
|
||||
|
||||
api:
|
||||
|
||||
ota:
|
||||
- platform: esphome
|
||||
|
||||
logger:
|
||||
|
||||
debug:
|
||||
|
||||
psram:
|
||||
|
||||
uart:
|
||||
- id: uart_1
|
||||
tx_pin: 1
|
||||
rx_pin: 3
|
||||
baud_rate: 9600
|
||||
- id: uart_2
|
||||
tx_pin:
|
||||
allow_other_uses: true
|
||||
number: 17
|
||||
rx_pin:
|
||||
allow_other_uses: true
|
||||
number: 16
|
||||
baud_rate: 19200
|
||||
|
||||
i2c:
|
||||
sda:
|
||||
number: 21
|
||||
allow_other_uses: true
|
||||
frequency: 100khz
|
||||
|
||||
spi:
|
||||
- id: spi_1
|
||||
clk_pin:
|
||||
allow_other_uses: true
|
||||
number: 12
|
||||
mosi_pin:
|
||||
allow_other_uses: true
|
||||
number: 13
|
||||
miso_pin:
|
||||
allow_other_uses: true
|
||||
number: 14
|
||||
- id: spi_2
|
||||
clk_pin:
|
||||
allow_other_uses: true
|
||||
number: 32
|
||||
mosi_pin: 33
|
||||
|
||||
modbus:
|
||||
uart_id: uart_1
|
||||
flow_control_pin:
|
||||
allow_other_uses: true
|
||||
number: 5
|
||||
id: mod_bus1
|
||||
|
||||
modbus_controller:
|
||||
- id: modbus_controller_test
|
||||
address: 0x2
|
||||
modbus_id: mod_bus1
|
||||
|
||||
mqtt:
|
||||
broker: test.mosquitto.org
|
||||
port: 1883
|
||||
discovery: true
|
||||
discovery_prefix: homeassistant
|
||||
idf_send_async: false
|
||||
on_message:
|
||||
topic: testing/sensor/testing_sensor/state
|
||||
qos: 0
|
||||
then:
|
||||
# yamllint disable rule:line-length
|
||||
- lambda: |-
|
||||
ESP_LOGD("Mqtt Test", "testing/sensor/testing_sensor/state=[%s]", x.c_str());
|
||||
# yamllint enable rule:line-length
|
||||
|
||||
vbus:
|
||||
- uart_id: uart_2
|
||||
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin: GPIO0
|
||||
id: io0_button
|
||||
icon: mdi:gesture-tap-button
|
||||
|
||||
- platform: modbus_controller
|
||||
modbus_controller_id: modbus_controller_test
|
||||
id: modbus_binsensortest
|
||||
register_type: read
|
||||
address: 0x3200
|
||||
bitmask: 0x80 # (bit 8)
|
||||
lambda: "return x;"
|
||||
|
||||
- platform: tm1638
|
||||
id: Button0
|
||||
key: 0
|
||||
filters:
|
||||
- delayed_on: 10ms
|
||||
on_press:
|
||||
then:
|
||||
- switch.turn_on: Led0
|
||||
on_release:
|
||||
then:
|
||||
- switch.turn_off: Led0
|
||||
- if:
|
||||
condition: ble.enabled
|
||||
then:
|
||||
- ble.disable:
|
||||
else:
|
||||
- ble.enable:
|
||||
|
||||
- platform: tm1638
|
||||
id: Button1
|
||||
key: 1
|
||||
on_press:
|
||||
then:
|
||||
- switch.turn_on: Led1
|
||||
on_release:
|
||||
then:
|
||||
- switch.turn_off: Led1
|
||||
|
||||
- platform: tm1638
|
||||
id: Button2
|
||||
key: 2
|
||||
on_press:
|
||||
then:
|
||||
- switch.turn_on: Led2
|
||||
on_release:
|
||||
then:
|
||||
- switch.turn_off: Led2
|
||||
|
||||
- platform: tm1638
|
||||
id: Button3
|
||||
key: 3
|
||||
on_press:
|
||||
then:
|
||||
- switch.turn_on: Led3
|
||||
on_release:
|
||||
then:
|
||||
- switch.turn_off: Led3
|
||||
|
||||
- platform: tm1638
|
||||
id: Button4
|
||||
key: 4
|
||||
on_press:
|
||||
then:
|
||||
- output.turn_on: Led4
|
||||
on_release:
|
||||
then:
|
||||
- output.turn_off: Led4
|
||||
|
||||
- platform: tm1638
|
||||
id: Button5
|
||||
key: 5
|
||||
on_press:
|
||||
then:
|
||||
- output.turn_on: Led5
|
||||
on_release:
|
||||
then:
|
||||
- output.turn_off: Led5
|
||||
|
||||
- platform: tm1638
|
||||
id: Button6
|
||||
key: 6
|
||||
on_press:
|
||||
then:
|
||||
- output.turn_on: Led6
|
||||
on_release:
|
||||
then:
|
||||
- output.turn_off: Led6
|
||||
|
||||
- platform: tm1638
|
||||
id: Button7
|
||||
key: 7
|
||||
on_press:
|
||||
then:
|
||||
- output.turn_on: Led7
|
||||
on_release:
|
||||
then:
|
||||
- output.turn_off: Led7
|
||||
|
||||
- platform: gpio
|
||||
id: sn74hc165_pin_0
|
||||
pin:
|
||||
sn74hc165: sn74hc165_hub
|
||||
number: 0
|
||||
|
||||
- platform: ezo_pmp
|
||||
pump_state:
|
||||
name: "Pump State"
|
||||
is_paused:
|
||||
name: "Is Paused"
|
||||
|
||||
- platform: matrix_keypad
|
||||
keypad_id: keypad
|
||||
id: key4
|
||||
row: 1
|
||||
col: 1
|
||||
- platform: matrix_keypad
|
||||
id: key1
|
||||
key: 1
|
||||
|
||||
- platform: vbus
|
||||
model: deltasol_bs_plus
|
||||
relay2:
|
||||
name: Relay 2 On
|
||||
sensor1_error:
|
||||
name: Sensor 1 Error
|
||||
|
||||
- platform: vbus
|
||||
model: custom
|
||||
command: 0x100
|
||||
source: 0x1234
|
||||
dest: 0x10
|
||||
binary_sensors:
|
||||
- id: vcustom_b
|
||||
name: VBus Custom Binary Sensor
|
||||
lambda: return x[0] & 1;
|
||||
|
||||
tlc5947:
|
||||
data_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO12
|
||||
clock_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO14
|
||||
lat_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO15
|
||||
|
||||
gp8403:
|
||||
- id: gp8403_5v
|
||||
voltage: 5V
|
||||
- id: gp8403_10v
|
||||
voltage: 10V
|
||||
|
||||
output:
|
||||
- platform: gpio
|
||||
pin: GPIO2
|
||||
id: built_in_led
|
||||
|
||||
- platform: tlc5947
|
||||
id: output_red
|
||||
channel: 0
|
||||
max_power: 0.8
|
||||
|
||||
- platform: mcp47a1
|
||||
id: output_mcp47a1
|
||||
|
||||
- platform: modbus_controller
|
||||
modbus_controller_id: modbus_controller_test
|
||||
id: modbus_output_test
|
||||
lambda: |-
|
||||
return x * 1.0 ;
|
||||
address: 0x9001
|
||||
value_type: U_WORD
|
||||
|
||||
- platform: tm1638
|
||||
id: Led4
|
||||
led: 4
|
||||
|
||||
- platform: tm1638
|
||||
id: Led5
|
||||
led: 5
|
||||
|
||||
- platform: tm1638
|
||||
id: Led6
|
||||
led: 6
|
||||
|
||||
- platform: tm1638
|
||||
id: Led7
|
||||
led: 7
|
||||
|
||||
- platform: gp8403
|
||||
id: gp8403_output_0
|
||||
gp8403_id: gp8403_5v
|
||||
channel: 0
|
||||
- platform: gp8403
|
||||
gp8403_id: gp8403_10v
|
||||
id: gp8403_output_1
|
||||
channel: 1
|
||||
|
||||
demo:
|
||||
|
||||
esp32_ble:
|
||||
enable_on_boot: false
|
||||
|
||||
esp32_ble_server:
|
||||
manufacturer: ESPHome
|
||||
model: Test11
|
||||
|
||||
esp32_improv:
|
||||
authorizer: io0_button
|
||||
authorized_duration: 1min
|
||||
status_indicator: built_in_led
|
||||
|
||||
ezo_pmp:
|
||||
id: hcl_pump
|
||||
update_interval: 1s
|
||||
|
||||
number:
|
||||
- platform: template
|
||||
name: My template number
|
||||
id: template_number_id
|
||||
optimistic: true
|
||||
max_value: 100
|
||||
min_value: 0
|
||||
step: 5
|
||||
unit_of_measurement: "%"
|
||||
mode: slider
|
||||
device_class: humidity
|
||||
on_value:
|
||||
- logger.log:
|
||||
format: Number changed to %f
|
||||
args: [x]
|
||||
set_action:
|
||||
- logger.log:
|
||||
format: Template Number set to %f
|
||||
args: [x]
|
||||
- number.set:
|
||||
id: template_number_id
|
||||
value: 50
|
||||
- number.to_min: template_number_id
|
||||
- number.to_min:
|
||||
id: template_number_id
|
||||
- number.to_max: template_number_id
|
||||
- number.to_max:
|
||||
id: template_number_id
|
||||
- number.increment: template_number_id
|
||||
- number.increment:
|
||||
id: template_number_id
|
||||
cycle: false
|
||||
- number.decrement: template_number_id
|
||||
- number.decrement:
|
||||
id: template_number_id
|
||||
cycle: false
|
||||
- number.operation:
|
||||
id: template_number_id
|
||||
operation: Increment
|
||||
cycle: false
|
||||
- number.operation:
|
||||
id: template_number_id
|
||||
operation: !lambda "return NUMBER_OP_INCREMENT;"
|
||||
cycle: !lambda "return false;"
|
||||
|
||||
- id: modbus_numbertest
|
||||
platform: modbus_controller
|
||||
modbus_controller_id: modbus_controller_test
|
||||
name: ModbusNumber
|
||||
address: 0x9002
|
||||
value_type: U_WORD
|
||||
lambda: "return x * 1.0;"
|
||||
write_lambda: |-
|
||||
return x * 1.0 ;
|
||||
multiply: 1.0
|
||||
|
||||
select:
|
||||
- platform: template
|
||||
name: My template select
|
||||
id: template_select_id
|
||||
optimistic: true
|
||||
initial_option: two
|
||||
restore_value: true
|
||||
on_value:
|
||||
- logger.log:
|
||||
format: Select changed to %s (index %d)"
|
||||
args: ["x.c_str()", "i"]
|
||||
set_action:
|
||||
- logger.log:
|
||||
format: Template Select set to %s
|
||||
args: ["x.c_str()"]
|
||||
- select.set:
|
||||
id: template_select_id
|
||||
option: two
|
||||
- select.first: template_select_id
|
||||
- select.last:
|
||||
id: template_select_id
|
||||
- select.previous: template_select_id
|
||||
- select.next:
|
||||
id: template_select_id
|
||||
cycle: false
|
||||
- select.operation:
|
||||
id: template_select_id
|
||||
operation: Previous
|
||||
cycle: false
|
||||
- select.operation:
|
||||
id: template_select_id
|
||||
operation: !lambda "return SELECT_OP_PREVIOUS;"
|
||||
cycle: !lambda "return true;"
|
||||
- select.set_index:
|
||||
id: template_select_id
|
||||
index: 1
|
||||
- select.set_index:
|
||||
id: template_select_id
|
||||
index: !lambda "return 1 + 1;"
|
||||
options:
|
||||
- one
|
||||
- two
|
||||
- three
|
||||
|
||||
- platform: modbus_controller
|
||||
name: Modbus Select Register 1000
|
||||
address: 1000
|
||||
value_type: U_WORD
|
||||
optionsmap:
|
||||
"Zero": 0
|
||||
"One": 1
|
||||
"Two": 2
|
||||
"Three": 3
|
||||
|
||||
sensor:
|
||||
- platform: adc
|
||||
id: adc_sensor_p32
|
||||
name: ADC pin 32
|
||||
pin:
|
||||
allow_other_uses: true
|
||||
number: 32
|
||||
attenuation: 11db
|
||||
update_interval: 1s
|
||||
- platform: internal_temperature
|
||||
name: Internal Temperature
|
||||
- platform: selec_meter
|
||||
total_active_energy:
|
||||
name: SelecEM2M Total Active Energy
|
||||
import_active_energy:
|
||||
name: SelecEM2M Import Active Energy
|
||||
export_active_energy:
|
||||
name: SelecEM2M Export Active Energy
|
||||
total_reactive_energy:
|
||||
name: SelecEM2M Total Reactive Energy
|
||||
import_reactive_energy:
|
||||
name: SelecEM2M Import Reactive Energy
|
||||
export_reactive_energy:
|
||||
name: SelecEM2M Export Reactive Energy
|
||||
apparent_energy:
|
||||
name: SelecEM2M Apparent Energy
|
||||
active_power:
|
||||
name: SelecEM2M Active Power
|
||||
reactive_power:
|
||||
name: SelecEM2M Reactive Power
|
||||
apparent_power:
|
||||
name: SelecEM2M Apparent Power
|
||||
voltage:
|
||||
name: SelecEM2M Voltage
|
||||
current:
|
||||
name: SelecEM2M Current
|
||||
power_factor:
|
||||
name: SelecEM2M Power Factor
|
||||
frequency:
|
||||
name: SelecEM2M Frequency
|
||||
maximum_demand_active_power:
|
||||
name: SelecEM2M Maximum Demand Active Power
|
||||
disabled_by_default: true
|
||||
maximum_demand_reactive_power:
|
||||
name: SelecEM2M Maximum Demand Reactive Power
|
||||
disabled_by_default: true
|
||||
maximum_demand_apparent_power:
|
||||
name: SelecEM2M Maximum Demand Apparent Power
|
||||
disabled_by_default: true
|
||||
|
||||
- id: modbus_sensortest
|
||||
platform: modbus_controller
|
||||
modbus_controller_id: modbus_controller_test
|
||||
address: 0x331A
|
||||
register_type: read
|
||||
value_type: U_WORD
|
||||
|
||||
- platform: t6615
|
||||
uart_id: uart_2
|
||||
co2:
|
||||
name: CO2 Sensor
|
||||
|
||||
- platform: sen5x
|
||||
id: sen54
|
||||
temperature:
|
||||
name: Temperature
|
||||
accuracy_decimals: 1
|
||||
humidity:
|
||||
name: Humidity
|
||||
accuracy_decimals: 0
|
||||
pm_1_0:
|
||||
name: PM <1µm Weight concentration
|
||||
id: pm_1_0
|
||||
accuracy_decimals: 1
|
||||
pm_2_5:
|
||||
name: PM <2.5µm Weight concentration
|
||||
id: pm_2_5
|
||||
accuracy_decimals: 1
|
||||
pm_4_0:
|
||||
name: PM <4µm Weight concentration
|
||||
id: pm_4_0
|
||||
accuracy_decimals: 1
|
||||
pm_10_0:
|
||||
name: PM <10µm Weight concentration
|
||||
id: pm_10_0
|
||||
accuracy_decimals: 1
|
||||
nox:
|
||||
name: NOx
|
||||
voc:
|
||||
name: VOC
|
||||
algorithm_tuning:
|
||||
index_offset: 100
|
||||
learning_time_offset_hours: 12
|
||||
learning_time_gain_hours: 12
|
||||
gating_max_duration_minutes: 180
|
||||
std_initial: 50
|
||||
gain_factor: 230
|
||||
temperature_compensation:
|
||||
offset: 0
|
||||
normalized_offset_slope: 0
|
||||
time_constant: 0
|
||||
auto_cleaning_interval: 604800s
|
||||
acceleration_mode: low
|
||||
store_baseline: true
|
||||
address: 0x69
|
||||
- platform: mcp9600
|
||||
thermocouple_type: K
|
||||
hot_junction:
|
||||
name: Thermocouple Temperature
|
||||
cold_junction:
|
||||
name: Ambient Temperature
|
||||
|
||||
- platform: ezo_pmp
|
||||
current_volume_dosed:
|
||||
name: Current Volume Dosed
|
||||
total_volume_dosed:
|
||||
name: Total Volume Dosed
|
||||
absolute_total_volume_dosed:
|
||||
name: Absolute Total Volume Dosed
|
||||
pump_voltage:
|
||||
name: Pump Voltage
|
||||
last_volume_requested:
|
||||
name: Last Volume Requested
|
||||
max_flow_rate:
|
||||
name: Max Flow Rate
|
||||
|
||||
- platform: vbus
|
||||
model: deltasol c
|
||||
temperature_3:
|
||||
name: Temperature 3
|
||||
operating_hours_1:
|
||||
name: Operating Hours 1
|
||||
heat_quantity:
|
||||
name: Heat Quantity
|
||||
time:
|
||||
name: System Time
|
||||
|
||||
- platform: debug
|
||||
free:
|
||||
name: "Heap Free"
|
||||
block:
|
||||
name: "Heap Max Block"
|
||||
loop_time:
|
||||
name: "Loop Time"
|
||||
psram:
|
||||
name: "PSRAM Free"
|
||||
|
||||
- platform: vbus
|
||||
model: custom
|
||||
command: 0x100
|
||||
source: 0x1234
|
||||
dest: 0x10
|
||||
sensors:
|
||||
- id: vcustom
|
||||
name: VBus Custom Sensor
|
||||
lambda: return x[0] / 10.0;
|
||||
|
||||
- platform: kuntze
|
||||
ph:
|
||||
name: Kuntze pH
|
||||
temperature:
|
||||
name: Kuntze temperature
|
||||
|
||||
- platform: ade7953_i2c
|
||||
irq_pin:
|
||||
allow_other_uses: true
|
||||
number: 16
|
||||
voltage:
|
||||
name: ADE7953 Voltage
|
||||
current_a:
|
||||
name: ADE7953 Current A
|
||||
current_b:
|
||||
name: ADE7953 Current B
|
||||
power_factor_a:
|
||||
name: "ADE7953 Power Factor A"
|
||||
power_factor_b:
|
||||
name: "ADE7953 Power Factor B"
|
||||
apparent_power_a:
|
||||
name: "ADE7953 Apparent Power A"
|
||||
apparent_power_b:
|
||||
name: "ADE7953 Apparent Power B"
|
||||
active_power_a:
|
||||
name: ADE7953 Active Power A
|
||||
active_power_b:
|
||||
name: ADE7953 Active Power B
|
||||
reactive_power_a:
|
||||
name: "ADE7953 Reactive Power A"
|
||||
reactive_power_b:
|
||||
name: "ADE7953 Reactive Power B"
|
||||
update_interval: 1s
|
||||
|
||||
- platform: ade7953_spi
|
||||
spi_id: spi_1
|
||||
cs_pin: 04
|
||||
irq_pin:
|
||||
allow_other_uses: true
|
||||
number: 16
|
||||
voltage:
|
||||
name: ADE7953 Voltage
|
||||
current_a:
|
||||
name: ADE7953 Current A
|
||||
current_b:
|
||||
name: ADE7953 Current B
|
||||
power_factor_a:
|
||||
name: "ADE7953 Power Factor A"
|
||||
power_factor_b:
|
||||
name: "ADE7953 Power Factor B"
|
||||
apparent_power_a:
|
||||
name: "ADE7953 Apparent Power A"
|
||||
apparent_power_b:
|
||||
name: "ADE7953 Apparent Power B"
|
||||
active_power_a:
|
||||
name: ADE7953 Active Power A
|
||||
active_power_b:
|
||||
name: ADE7953 Active Power B
|
||||
reactive_power_a:
|
||||
name: "ADE7953 Reactive Power A"
|
||||
reactive_power_b:
|
||||
name: "ADE7953 Reactive Power B"
|
||||
update_interval: 1s
|
||||
|
||||
script:
|
||||
- id: automation_test
|
||||
then:
|
||||
- repeat:
|
||||
count: 5
|
||||
then:
|
||||
- logger.log: looping!
|
||||
|
||||
- id: zero_repeat_test
|
||||
then:
|
||||
- repeat:
|
||||
count: !lambda "return 0;"
|
||||
then:
|
||||
- logger.log: shouldn't see mee!
|
||||
|
||||
switch:
|
||||
- platform: modbus_controller
|
||||
modbus_controller_id: modbus_controller_test
|
||||
id: modbus_switch_test
|
||||
register_type: coil
|
||||
address: 2
|
||||
bitmask: 1
|
||||
|
||||
- platform: tm1638
|
||||
id: Led0
|
||||
led: 0
|
||||
name: TM1638Led0
|
||||
|
||||
- platform: tm1638
|
||||
id: Led1
|
||||
led: 1
|
||||
name: TM1638Led1
|
||||
|
||||
- platform: tm1638
|
||||
id: Led2
|
||||
led: 2
|
||||
name: TM1638Led2
|
||||
|
||||
- platform: tm1638
|
||||
id: Led3
|
||||
led: 3
|
||||
name: TM1638Led3
|
||||
|
||||
display:
|
||||
- platform: tm1638
|
||||
id: primarydisplay
|
||||
stb_pin:
|
||||
allow_other_uses: true
|
||||
number: 5 # TM1638 STB
|
||||
clk_pin: 18 # TM1638 CLK
|
||||
dio_pin: 23 # TM1638 DIO
|
||||
update_interval: 5s
|
||||
intensity: 5
|
||||
lambda: |-
|
||||
it.print("81818181");
|
||||
|
||||
time:
|
||||
- platform: pcf85063
|
||||
- platform: pcf8563
|
||||
|
||||
text_sensor:
|
||||
- platform: ezo_pmp
|
||||
dosing_mode:
|
||||
name: Dosing Mode
|
||||
calibration_status:
|
||||
name: Calibration Status
|
||||
on_value:
|
||||
- ezo_pmp.dose_volume:
|
||||
id: hcl_pump
|
||||
volume: 10
|
||||
- ezo_pmp.dose_volume_over_time:
|
||||
id: hcl_pump
|
||||
volume: 10
|
||||
duration: 2
|
||||
- ezo_pmp.dose_with_constant_flow_rate:
|
||||
id: hcl_pump
|
||||
volume_per_minute: 10
|
||||
duration: 2
|
||||
- ezo_pmp.set_calibration_volume:
|
||||
id: hcl_pump
|
||||
volume: 10
|
||||
- ezo_pmp.find: hcl_pump
|
||||
- ezo_pmp.dose_continuously: hcl_pump
|
||||
- ezo_pmp.clear_total_volume_dosed: hcl_pump
|
||||
- ezo_pmp.clear_calibration: hcl_pump
|
||||
- ezo_pmp.pause_dosing: hcl_pump
|
||||
- ezo_pmp.stop_dosing: hcl_pump
|
||||
- ezo_pmp.arbitrary_command:
|
||||
id: hcl_pump
|
||||
command: D,?
|
||||
|
||||
sn74hc165:
|
||||
id: sn74hc165_hub
|
||||
data_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO12
|
||||
clock_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO14
|
||||
load_pin:
|
||||
number: GPIO27
|
||||
clock_inhibit_pin:
|
||||
number: GPIO26
|
||||
sr_count: 4
|
||||
|
||||
matrix_keypad:
|
||||
id: keypad
|
||||
rows:
|
||||
- pin:
|
||||
allow_other_uses: true
|
||||
number: 21
|
||||
- pin: 19
|
||||
columns:
|
||||
- pin:
|
||||
allow_other_uses: true
|
||||
number: 17
|
||||
- pin:
|
||||
allow_other_uses: true
|
||||
number: 16
|
||||
keys: "1234"
|
||||
|
||||
key_collector:
|
||||
- id: reader
|
||||
source_id: keypad
|
||||
min_length: 4
|
||||
max_length: 4
|
||||
|
||||
light:
|
||||
- platform: esp32_rmt_led_strip
|
||||
id: led_strip
|
||||
pin:
|
||||
allow_other_uses: true
|
||||
number: 13
|
||||
num_leds: 60
|
||||
rmt_channel: 6
|
||||
rgb_order: GRB
|
||||
chipset: ws2812
|
||||
- platform: esp32_rmt_led_strip
|
||||
id: led_strip2
|
||||
pin:
|
||||
allow_other_uses: true
|
||||
number: 15
|
||||
num_leds: 60
|
||||
rmt_channel: 2
|
||||
rgb_order: RGB
|
||||
bit0_high: 100us
|
||||
bit0_low: 100us
|
||||
bit1_high: 100us
|
||||
bit1_low: 100us
|
||||
879
tests/test2.yaml
879
tests/test2.yaml
|
|
@ -1,879 +0,0 @@
|
|||
---
|
||||
esphome:
|
||||
name: $devicename
|
||||
build_path: build/test2
|
||||
|
||||
esp32:
|
||||
board: esp32dev
|
||||
flash_size: 8MB
|
||||
|
||||
globals:
|
||||
- id: my_global_string
|
||||
type: std::string
|
||||
restore_value: true
|
||||
max_restore_data_length: 70
|
||||
initial_value: '"DefaultValue"'
|
||||
|
||||
substitutions:
|
||||
devicename: test2
|
||||
|
||||
ethernet:
|
||||
type: LAN8720
|
||||
mdc_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO23
|
||||
mdio_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO25
|
||||
clk_mode: GPIO0_IN
|
||||
phy_addr: 0
|
||||
power_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO25
|
||||
manual_ip:
|
||||
static_ip: 192.168.178.56
|
||||
gateway: 192.168.178.1
|
||||
subnet: 255.255.255.0
|
||||
domain: .local
|
||||
|
||||
network:
|
||||
enable_ipv6: true
|
||||
|
||||
mdns:
|
||||
disabled: true
|
||||
|
||||
api:
|
||||
|
||||
i2c:
|
||||
sda:
|
||||
allow_other_uses: true
|
||||
number: 21
|
||||
scl:
|
||||
allow_other_uses: true
|
||||
number: 22
|
||||
scan: false
|
||||
|
||||
spi:
|
||||
clk_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO21
|
||||
mosi_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO22
|
||||
miso_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO23
|
||||
|
||||
uart:
|
||||
tx_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO22
|
||||
rx_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO23
|
||||
baud_rate: 115200
|
||||
# Specifically added for testing debug with no after: definition.
|
||||
debug:
|
||||
dummy_receiver: false
|
||||
direction: rx
|
||||
sequence:
|
||||
- lambda: UARTDebug::log_hex(direction, bytes, ':');
|
||||
|
||||
safe_mode:
|
||||
|
||||
ota:
|
||||
- platform: esphome
|
||||
port: 3286
|
||||
|
||||
logger:
|
||||
level: DEBUG
|
||||
|
||||
debug:
|
||||
|
||||
deep_sleep:
|
||||
run_duration:
|
||||
default: 20s
|
||||
gpio_wakeup_reason: 10s
|
||||
touch_wakeup_reason: 15s
|
||||
sleep_duration: 50s
|
||||
wakeup_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO2
|
||||
wakeup_pin_mode: INVERT_WAKEUP
|
||||
|
||||
as3935_i2c:
|
||||
irq_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO12
|
||||
|
||||
mcp3008:
|
||||
- id: mcp3008_hub
|
||||
cs_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO12
|
||||
|
||||
output:
|
||||
- platform: ac_dimmer
|
||||
id: dimmer1
|
||||
gate_pin: GPIO5
|
||||
zero_cross_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO12
|
||||
|
||||
sensor:
|
||||
- platform: homeassistant
|
||||
entity_id: sensor.hello_world
|
||||
id: ha_hello_world
|
||||
- platform: homeassistant
|
||||
entity_id: climate.living_room
|
||||
attribute: temperature
|
||||
id: ha_hello_world_temperature
|
||||
- platform: ble_rssi
|
||||
mac_address: AC:37:43:77:5F:4C
|
||||
name: BLE Google Home Mini RSSI value
|
||||
- platform: ble_rssi
|
||||
service_uuid: 11aa
|
||||
name: BLE Test Service 16
|
||||
- platform: ble_rssi
|
||||
service_uuid: "11223344"
|
||||
name: BLE Test Service 32
|
||||
- platform: ble_rssi
|
||||
service_uuid: 11223344-5566-7788-99aa-bbccddeeff00
|
||||
name: BLE Test Service 128
|
||||
- platform: ble_rssi
|
||||
service_uuid: 11223344-5566-7788-99aa-bbccddeeff00
|
||||
name: BLE Test iBeacon UUID
|
||||
- platform: b_parasite
|
||||
mac_address: F0:CA:F0:CA:01:01
|
||||
humidity:
|
||||
name: b-parasite Air Humidity
|
||||
temperature:
|
||||
name: b-parasite Air Temperature
|
||||
moisture:
|
||||
name: b-parasite Soil Moisture
|
||||
battery_voltage:
|
||||
name: b-parasite Battery Voltage
|
||||
illuminance:
|
||||
name: b-parasite Illuminance
|
||||
- platform: senseair
|
||||
id: senseair0
|
||||
co2:
|
||||
name: SenseAir CO2 Value
|
||||
on_value:
|
||||
then:
|
||||
- senseair.background_calibration: senseair0
|
||||
- senseair.background_calibration_result: senseair0
|
||||
- senseair.abc_get_period: senseair0
|
||||
- senseair.abc_enable: senseair0
|
||||
- senseair.abc_disable: senseair0
|
||||
update_interval: 15s
|
||||
- platform: ruuvitag
|
||||
mac_address: FF:56:D3:2F:7D:E8
|
||||
humidity:
|
||||
name: RuuviTag Humidity
|
||||
temperature:
|
||||
name: RuuviTag Temperature
|
||||
pressure:
|
||||
name: RuuviTag Pressure
|
||||
acceleration_x:
|
||||
name: RuuviTag Acceleration X
|
||||
acceleration_y:
|
||||
name: RuuviTag Acceleration Y
|
||||
acceleration_z:
|
||||
name: RuuviTag Acceleration Z
|
||||
battery_voltage:
|
||||
name: RuuviTag Battery Voltage
|
||||
tx_power:
|
||||
name: RuuviTag TX Power
|
||||
movement_counter:
|
||||
name: RuuviTag Movement Counter
|
||||
measurement_sequence_number:
|
||||
name: RuuviTag Measurement Sequence Number
|
||||
- platform: as3935
|
||||
lightning_energy:
|
||||
name: Lightning Energy
|
||||
distance:
|
||||
name: Distance Storm
|
||||
- platform: xiaomi_hhccjcy01
|
||||
mac_address: 94:2B:FF:5C:91:61
|
||||
temperature:
|
||||
name: Xiaomi HHCCJCY01 Temperature
|
||||
moisture:
|
||||
name: Xiaomi HHCCJCY01 Moisture
|
||||
illuminance:
|
||||
name: Xiaomi HHCCJCY01 Illuminance
|
||||
conductivity:
|
||||
name: Xiaomi HHCCJCY01 Soil Conductivity
|
||||
battery_level:
|
||||
name: Xiaomi HHCCJCY01 Battery Level
|
||||
- platform: xiaomi_hhccjcy10
|
||||
mac_address: DD:25:6D:E4:FF:8F
|
||||
temperature:
|
||||
name: "Xiaomi HHCCJCY10 Temperature"
|
||||
moisture:
|
||||
name: "Xiaomi HHCCJCY10 Moisture"
|
||||
illuminance:
|
||||
name: "Xiaomi HHCCJCY10 Illuminance"
|
||||
conductivity:
|
||||
name: "Xiaomi HHCCJCY10 Soil Conductivity"
|
||||
battery_level:
|
||||
name: "Xiaomi HHCCJCY10 Battery Level"
|
||||
- platform: xiaomi_lywsdcgq
|
||||
mac_address: 7A:80:8E:19:36:BA
|
||||
temperature:
|
||||
name: Xiaomi LYWSDCGQ Temperature
|
||||
humidity:
|
||||
name: Xiaomi LYWSDCGQ Humidity
|
||||
battery_level:
|
||||
name: Xiaomi LYWSDCGQ Battery Level
|
||||
- platform: xiaomi_lywsd02
|
||||
mac_address: 3F:5B:7D:82:58:4E
|
||||
temperature:
|
||||
name: Xiaomi LYWSD02 Temperature
|
||||
humidity:
|
||||
name: Xiaomi LYWSD02 Humidity
|
||||
battery_level:
|
||||
name: Xiaomi LYWSD02 Battery Level
|
||||
- platform: xiaomi_cgg1
|
||||
mac_address: 7A:80:8E:19:36:BA
|
||||
temperature:
|
||||
name: Xiaomi CGG1 Temperature
|
||||
humidity:
|
||||
name: Xiaomi CGG1 Humidity
|
||||
battery_level:
|
||||
name: Xiaomi CGG1 Battery Level
|
||||
- platform: xiaomi_gcls002
|
||||
mac_address: 94:2B:FF:5C:91:61
|
||||
temperature:
|
||||
name: GCLS02 Temperature
|
||||
moisture:
|
||||
name: GCLS02 Moisture
|
||||
conductivity:
|
||||
name: GCLS02 Soil Conductivity
|
||||
illuminance:
|
||||
name: GCLS02 Illuminance
|
||||
- platform: xiaomi_hhccpot002
|
||||
mac_address: 94:2B:FF:5C:91:61
|
||||
moisture:
|
||||
name: HHCCPOT002 Moisture
|
||||
conductivity:
|
||||
name: HHCCPOT002 Soil Conductivity
|
||||
- platform: xiaomi_lywsd03mmc
|
||||
mac_address: A4:C1:38:4E:16:78
|
||||
bindkey: e9efaa6873f9f9c87a5e75a5f814801c
|
||||
temperature:
|
||||
name: Xiaomi LYWSD03MMC Temperature
|
||||
humidity:
|
||||
name: Xiaomi LYWSD03MMC Humidity
|
||||
battery_level:
|
||||
name: Xiaomi LYWSD03MMC Battery Level
|
||||
- platform: xiaomi_cgd1
|
||||
mac_address: A4:C1:38:D1:61:7D
|
||||
bindkey: c99d2313182473b38001086febf781bd
|
||||
temperature:
|
||||
name: Xiaomi CGD1 Temperature
|
||||
humidity:
|
||||
name: Xiaomi CGD1 Humidity
|
||||
battery_level:
|
||||
name: Xiaomi CGD1 Battery Level
|
||||
- platform: xiaomi_jqjcy01ym
|
||||
mac_address: 7A:80:8E:19:36:BA
|
||||
temperature:
|
||||
name: JQJCY01YM Temperature
|
||||
humidity:
|
||||
name: JQJCY01YM Humidity
|
||||
formaldehyde:
|
||||
name: JQJCY01YM Formaldehyde
|
||||
battery_level:
|
||||
name: JQJCY01YM Battery Level
|
||||
- platform: xiaomi_mhoc303
|
||||
mac_address: E7:50:59:32:A0:1C
|
||||
temperature:
|
||||
name: MHO-C303 Temperature
|
||||
humidity:
|
||||
name: MHO-C303 Humidity
|
||||
battery_level:
|
||||
name: MHO-C303 Battery Level
|
||||
- platform: atc_mithermometer
|
||||
mac_address: A4:C1:38:4E:16:78
|
||||
temperature:
|
||||
name: ATC Temperature
|
||||
humidity:
|
||||
name: ATC Humidity
|
||||
battery_level:
|
||||
name: ATC Battery-Level
|
||||
battery_voltage:
|
||||
name: ATC Battery-Voltage
|
||||
- platform: pvvx_mithermometer
|
||||
mac_address: A4:C1:38:4E:16:78
|
||||
temperature:
|
||||
name: PVVX Temperature
|
||||
humidity:
|
||||
name: PVVX Humidity
|
||||
battery_level:
|
||||
name: PVVX Battery-Level
|
||||
battery_voltage:
|
||||
name: PVVX Battery-Voltage
|
||||
- platform: inkbird_ibsth1_mini
|
||||
mac_address: 38:81:D7:0A:9C:11
|
||||
temperature:
|
||||
name: Inkbird IBS-TH1 Temperature
|
||||
humidity:
|
||||
name: Inkbird IBS-TH1 Humidity
|
||||
battery_level:
|
||||
name: Inkbird IBS-TH1 Battery Level
|
||||
- platform: xiaomi_rtcgq02lm
|
||||
id: motion_rtcgq02lm
|
||||
battery_level:
|
||||
name: Mi Motion Sensor 2 Battery level
|
||||
- platform: ltr390
|
||||
uv:
|
||||
name: LTR390 UV
|
||||
uv_index:
|
||||
name: LTR390 UVI
|
||||
light:
|
||||
name: LTR390 Light
|
||||
ambient_light:
|
||||
name: LTR390 ALS
|
||||
gain: X3
|
||||
resolution: 18
|
||||
window_correction_factor: 1.0
|
||||
address: 0x53
|
||||
update_interval: 60s
|
||||
- platform: sgp4x
|
||||
voc:
|
||||
name: VOC Index
|
||||
id: sgp40_voc_index
|
||||
algorithm_tuning:
|
||||
index_offset: 100
|
||||
learning_time_offset_hours: 12
|
||||
learning_time_gain_hours: 12
|
||||
gating_max_duration_minutes: 180
|
||||
std_initial: 50
|
||||
gain_factor: 230
|
||||
nox:
|
||||
name: NOx
|
||||
algorithm_tuning:
|
||||
index_offset: 100
|
||||
learning_time_offset_hours: 12
|
||||
learning_time_gain_hours: 12
|
||||
gating_max_duration_minutes: 180
|
||||
std_initial: 50
|
||||
gain_factor: 230
|
||||
update_interval: 5s
|
||||
- platform: mcp3008
|
||||
update_interval: 5s
|
||||
mcp3008_id: mcp3008_hub
|
||||
id: freezer_temp_source
|
||||
reference_voltage: 3.19
|
||||
number: 0
|
||||
- id: airthingswp
|
||||
platform: airthings_wave_plus
|
||||
ble_client_id: airthings01
|
||||
update_interval: 5min
|
||||
battery_update_interval: 12h
|
||||
temperature:
|
||||
name: Wave Plus Temperature
|
||||
radon:
|
||||
name: Wave Plus Radon
|
||||
radon_long_term:
|
||||
name: Wave Plus Radon Long Term
|
||||
pressure:
|
||||
name: Wave Plus Pressure
|
||||
humidity:
|
||||
name: Wave Plus Humidity
|
||||
co2:
|
||||
name: Wave Plus CO2
|
||||
tvoc:
|
||||
name: Wave Plus VOC
|
||||
battery_voltage:
|
||||
name: Wave Plus Battery Voltage
|
||||
- id: airthingswm
|
||||
platform: airthings_wave_mini
|
||||
ble_client_id: airthingsmini01
|
||||
update_interval: 5min
|
||||
battery_update_interval: 12h
|
||||
temperature:
|
||||
name: Wave Mini Temperature
|
||||
humidity:
|
||||
name: Wave Mini Humidity
|
||||
pressure:
|
||||
name: Wave Mini Pressure
|
||||
tvoc:
|
||||
name: Wave Mini VOC
|
||||
battery_voltage:
|
||||
name: Wave Mini Battery Voltage
|
||||
- platform: ina260
|
||||
address: 0x40
|
||||
current:
|
||||
name: INA260 Current
|
||||
power:
|
||||
name: INA260 Power
|
||||
bus_voltage:
|
||||
name: INA260 Voltage
|
||||
update_interval: 60s
|
||||
- platform: radon_eye_rd200
|
||||
ble_client_id: radon_eye_ble_id
|
||||
update_interval: 10min
|
||||
radon:
|
||||
name: RD200 Radon
|
||||
radon_long_term:
|
||||
name: RD200 Radon Long Term
|
||||
- platform: mopeka_pro_check
|
||||
mac_address: D3:75:F2:DC:16:91
|
||||
tank_type: CUSTOM
|
||||
custom_distance_full: 40cm
|
||||
custom_distance_empty: 10mm
|
||||
temperature:
|
||||
name: Propane test temp
|
||||
level:
|
||||
name: Propane test level
|
||||
distance:
|
||||
name: Propane test distance
|
||||
battery_level:
|
||||
name: Propane test battery level
|
||||
- platform: ufire_ec
|
||||
id: ufire_ec_board
|
||||
ec:
|
||||
name: Ufire EC
|
||||
temperature_sensor: ha_hello_world_temperature
|
||||
temperature_compensation: 20.0
|
||||
temperature_coefficient: 0.019
|
||||
- platform: ufire_ise
|
||||
id: ufire_ise_board
|
||||
temperature_sensor: ha_hello_world_temperature
|
||||
ph:
|
||||
name: Ufire pH
|
||||
- platform: mics_4514
|
||||
update_interval: 60s
|
||||
nitrogen_dioxide:
|
||||
name: MICS-4514 NO2
|
||||
carbon_monoxide:
|
||||
name: MICS-4514 CO
|
||||
methane:
|
||||
name: MICS-4514 CH4
|
||||
hydrogen:
|
||||
name: MICS-4514 H2
|
||||
ethanol:
|
||||
name: MICS-4514 C2H5OH
|
||||
ammonia:
|
||||
name: MICS-4514 NH3
|
||||
- platform: mopeka_std_check
|
||||
mac_address: D3:75:F2:DC:16:91
|
||||
tank_type: CUSTOM
|
||||
custom_distance_full: 40cm
|
||||
custom_distance_empty: 10mm
|
||||
temperature:
|
||||
name: Propane test temp
|
||||
level:
|
||||
name: Propane test level
|
||||
distance:
|
||||
name: Propane test distance
|
||||
battery_level:
|
||||
name: Propane test battery level
|
||||
- platform: duty_time
|
||||
id: duty_time1
|
||||
name: Test Duty Time
|
||||
restore: true
|
||||
last_time:
|
||||
name: Test Last Duty Time Sensor
|
||||
sensor: ha_hello_world_binary
|
||||
- platform: duty_time
|
||||
id: duty_time2
|
||||
name: Test Duty Time 2
|
||||
restore: false
|
||||
lambda: "return true;"
|
||||
|
||||
time:
|
||||
- platform: homeassistant
|
||||
on_time:
|
||||
- at: "16:00:00"
|
||||
then:
|
||||
- logger.log: It's 16:00
|
||||
- if:
|
||||
condition:
|
||||
- sensor.duty_time.is_running: duty_time2
|
||||
then:
|
||||
- sensor.duty_time.start: duty_time1
|
||||
- if:
|
||||
condition:
|
||||
- sensor.duty_time.is_not_running: duty_time1
|
||||
then:
|
||||
- sensor.duty_time.stop: duty_time2
|
||||
- sensor.duty_time.reset: duty_time1
|
||||
|
||||
esp32_touch:
|
||||
setup_mode: true
|
||||
|
||||
binary_sensor:
|
||||
- platform: homeassistant
|
||||
entity_id: binary_sensor.hello_world
|
||||
id: ha_hello_world_binary
|
||||
- platform: homeassistant
|
||||
entity_id: binary_sensor.hello
|
||||
attribute: world
|
||||
id: ha_hello_world_binary_attribute
|
||||
- platform: ble_presence
|
||||
mac_address: AC:37:43:77:5F:4C
|
||||
name: ESP32 BLE Tracker Google Home Mini
|
||||
timeout: 30s
|
||||
- platform: ble_presence
|
||||
service_uuid: 11aa
|
||||
name: BLE Test Service 16 Presence
|
||||
- platform: ble_presence
|
||||
service_uuid: "11223344"
|
||||
name: BLE Test Service 32 Presence
|
||||
- platform: ble_presence
|
||||
service_uuid: 11223344-5566-7788-99aa-bbccddeeff00
|
||||
name: BLE Test Service 128 Presence
|
||||
- platform: ble_presence
|
||||
ibeacon_uuid: 11223344-5566-7788-99aa-bbccddeeff00
|
||||
ibeacon_major: 100
|
||||
ibeacon_minor: 1
|
||||
name: BLE Test iBeacon Presence
|
||||
- platform: esp32_touch
|
||||
name: ESP32 Touch Pad GPIO27
|
||||
pin: GPIO27
|
||||
threshold: 1000
|
||||
- platform: as3935
|
||||
name: Storm Alert
|
||||
- platform: xiaomi_mue4094rt
|
||||
name: MUE4094RT Motion
|
||||
mac_address: 7A:80:8E:19:36:BA
|
||||
timeout: 5s
|
||||
- platform: xiaomi_mjyd02yla
|
||||
name: MJYD02YL-A Motion
|
||||
mac_address: 50:EC:50:CD:32:02
|
||||
bindkey: 48403ebe2d385db8d0c187f81e62cb64
|
||||
idle_time:
|
||||
name: MJYD02YL-A Idle Time
|
||||
light:
|
||||
name: MJYD02YL-A Light Status
|
||||
battery_level:
|
||||
name: MJYD02YL-A Battery Level
|
||||
- platform: xiaomi_wx08zm
|
||||
name: WX08ZM Activation State
|
||||
mac_address: 74:a3:4a:b5:07:34
|
||||
tablet:
|
||||
name: WX08ZM Tablet Resource
|
||||
battery_level:
|
||||
name: WX08ZM Battery Level
|
||||
- platform: xiaomi_cgpr1
|
||||
name: CGPR1 Motion
|
||||
mac_address: "12:34:56:12:34:56"
|
||||
bindkey: 48403ebe2d385db8d0c187f81e62cb64
|
||||
battery_level:
|
||||
name: CGPR1 battery Level
|
||||
idle_time:
|
||||
name: CGPR1 Idle Time
|
||||
illuminance:
|
||||
name: CGPR1 Illuminance
|
||||
- platform: xiaomi_rtcgq02lm
|
||||
id: motion_rtcgq02lm
|
||||
motion:
|
||||
name: Mi Motion Sensor 2
|
||||
light:
|
||||
name: Mi Motion Sensor 2 Light
|
||||
button:
|
||||
name: Mi Motion Sensor 2 Button
|
||||
- platform: gpio
|
||||
id: gpio_set_retry_test
|
||||
pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO9
|
||||
on_press:
|
||||
then:
|
||||
- lambda: |-
|
||||
App.scheduler.set_retry(id(gpio_set_retry_test), "set_retry_test", 100, 3, [](const uint8_t remaining) {
|
||||
return remaining ? RetryResult::RETRY : RetryResult::DONE; // just to reference both symbols
|
||||
}, 5.0f);
|
||||
|
||||
esp32_ble_tracker:
|
||||
on_ble_advertise:
|
||||
- mac_address:
|
||||
- AA:BB:CC:DD:EE:FF
|
||||
- FF:EE:DD:CC:BB:AA
|
||||
then:
|
||||
# yamllint disable rule:line-length
|
||||
- lambda: !lambda |-
|
||||
ESP_LOGD("main", "The device address (%s) exists in list", x.address_str().c_str());
|
||||
# yamllint enable rule:line-length
|
||||
- mac_address: AC:37:43:77:5F:4C
|
||||
then:
|
||||
# yamllint disable rule:line-length
|
||||
- lambda: !lambda |-
|
||||
ESP_LOGD("main", "The device address is %s", x.address_str().c_str());
|
||||
# yamllint enable rule:line-length
|
||||
- then:
|
||||
# yamllint disable rule:line-length
|
||||
- lambda: !lambda |-
|
||||
ESP_LOGD("main", "The device address is %s", x.address_str().c_str());
|
||||
# yamllint enable rule:line-length
|
||||
on_ble_service_data_advertise:
|
||||
- service_uuid: ABCD
|
||||
then:
|
||||
- lambda: !lambda |-
|
||||
ESP_LOGD("main", "Length of service data is %i", x.size());
|
||||
on_ble_manufacturer_data_advertise:
|
||||
- manufacturer_id: ABCD
|
||||
then:
|
||||
- lambda: !lambda |-
|
||||
ESP_LOGD("main", "Length of manufacturer data is %i", x.size());
|
||||
|
||||
ble_client:
|
||||
- mac_address: 01:02:03:04:05:06
|
||||
id: airthings01
|
||||
- mac_address: 01:02:03:04:05:06
|
||||
id: airthingsmini01
|
||||
- mac_address: 01:02:03:04:05:06
|
||||
id: radon_eye_ble_id
|
||||
|
||||
airthings_ble:
|
||||
|
||||
radon_eye_ble:
|
||||
|
||||
ruuvi_ble:
|
||||
|
||||
xiaomi_ble:
|
||||
|
||||
mopeka_ble:
|
||||
|
||||
bluetooth_proxy:
|
||||
active: true
|
||||
|
||||
xiaomi_rtcgq02lm:
|
||||
- id: motion_rtcgq02lm
|
||||
mac_address: 01:02:03:04:05:06
|
||||
bindkey: "48403ebe2d385db8d0c187f81e62cb64"
|
||||
|
||||
status_led:
|
||||
pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO2
|
||||
|
||||
text_sensor:
|
||||
- platform: version
|
||||
name: ESPHome Version
|
||||
icon: mdi:icon
|
||||
id: version_sensor
|
||||
on_value:
|
||||
- if:
|
||||
condition:
|
||||
- api.connected:
|
||||
then:
|
||||
# yamllint disable rule:line-length
|
||||
- lambda: !lambda |-
|
||||
ESP_LOGD("main", "The state is %s=%s", x.c_str(), id(version_sensor).state.c_str());
|
||||
# yamllint enable rule:line-length
|
||||
- script.execute: my_script
|
||||
- script.execute:
|
||||
id: my_script_with_params
|
||||
prefix: Running my_script_with_params
|
||||
param2: 100
|
||||
param3: true
|
||||
- script.execute:
|
||||
id: my_script_with_params
|
||||
prefix: Running my_script_with_params using lambda parameters
|
||||
param2: !lambda return 200;
|
||||
param3: !lambda return true;
|
||||
- homeassistant.service:
|
||||
service: notify.html5
|
||||
data:
|
||||
title: New Humidity
|
||||
data_template:
|
||||
message: The humidity is {{ my_variable }}%.
|
||||
variables:
|
||||
my_variable: |-
|
||||
return id(version_sensor).state;
|
||||
my_variable_str: |-
|
||||
return "Hello World";
|
||||
- homeassistant.service:
|
||||
service: light.turn_on
|
||||
data:
|
||||
entity_id: light.my_light
|
||||
- homeassistant.tag_scanned:
|
||||
tag: 1234-abcd
|
||||
- homeassistant.tag_scanned: 1234-abcd
|
||||
- deep_sleep.enter:
|
||||
sleep_duration: 30min
|
||||
- deep_sleep.enter:
|
||||
sleep_duration: !lambda "return 30 * 60 * 1000;"
|
||||
- platform: template
|
||||
name: Template Text Sensor
|
||||
lambda: |-
|
||||
return {"Hello World"};
|
||||
filters:
|
||||
- to_upper:
|
||||
- to_lower:
|
||||
- append: xyz
|
||||
- prepend: abcd
|
||||
- substitute:
|
||||
- Hello -> Goodbye
|
||||
- map:
|
||||
- red -> green
|
||||
- lambda: 'return {"1234"};'
|
||||
- platform: homeassistant
|
||||
entity_id: sensor.hello_world2
|
||||
id: ha_hello_world2
|
||||
- platform: homeassistant
|
||||
entity_id: sensor.hello_world3
|
||||
id: ha_hello_world3
|
||||
attribute: some_attribute
|
||||
- platform: ble_scanner
|
||||
name: Scanner
|
||||
|
||||
script:
|
||||
- id: my_script
|
||||
mode: single
|
||||
then:
|
||||
- lambda: 'ESP_LOGD("main", "Hello World!");'
|
||||
- id: my_script_queued
|
||||
mode: queued
|
||||
max_runs: 2
|
||||
then:
|
||||
- lambda: 'ESP_LOGD("main", "Hello World!");'
|
||||
- id: my_script_parallel
|
||||
mode: parallel
|
||||
max_runs: 2
|
||||
then:
|
||||
- lambda: 'ESP_LOGD("main", "Hello World!");'
|
||||
- id: my_script_restart
|
||||
mode: restart
|
||||
then:
|
||||
- lambda: 'ESP_LOGD("main", "Hello World!");'
|
||||
- id: my_script_with_params
|
||||
parameters:
|
||||
prefix: string
|
||||
param2: int
|
||||
param3: bool
|
||||
then:
|
||||
- lambda: 'ESP_LOGD("main", (prefix + " Hello World!" + to_string(param2) + " " + to_string(param3)).c_str());'
|
||||
|
||||
stepper:
|
||||
- platform: uln2003
|
||||
id: my_stepper
|
||||
pin_a:
|
||||
allow_other_uses: true
|
||||
number: GPIO23
|
||||
pin_b: GPIO27
|
||||
pin_c:
|
||||
allow_other_uses: true
|
||||
number: GPIO25
|
||||
pin_d: GPIO26
|
||||
sleep_when_done: false
|
||||
step_mode: HALF_STEP
|
||||
max_speed: 250 steps/s
|
||||
|
||||
# Optional:
|
||||
acceleration: inf
|
||||
deceleration: inf
|
||||
|
||||
interval:
|
||||
interval: 5s
|
||||
startup_delay: 10s
|
||||
then:
|
||||
- logger.log: Interval Run
|
||||
|
||||
display:
|
||||
- platform: st7789v
|
||||
model: LILYGO_T-EMBED_170X320
|
||||
spi_mode: mode0
|
||||
height: 320
|
||||
width: 170
|
||||
offset_height: 35
|
||||
offset_width: 0
|
||||
dc_pin: GPIO13
|
||||
reset_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO9
|
||||
|
||||
image:
|
||||
- id: binary_image
|
||||
file: pnglogo.png
|
||||
type: BINARY
|
||||
dither: FloydSteinberg
|
||||
- id: transparent_transparent_image
|
||||
file: pnglogo.png
|
||||
type: TRANSPARENT_BINARY
|
||||
- id: rgba_image
|
||||
file: pnglogo.png
|
||||
type: RGBA
|
||||
resize: 50x50
|
||||
- id: rgb24_image
|
||||
file: pnglogo.png
|
||||
type: RGB24
|
||||
use_transparency: true
|
||||
- id: rgb565_image
|
||||
file: pnglogo.png
|
||||
type: RGB565
|
||||
use_transparency: false
|
||||
- id: web_svg_image
|
||||
file: https://raw.githubusercontent.com/esphome/esphome-docs/a62d7ab193c1a464ed791670170c7d518189109b/images/logo.svg
|
||||
resize: 256x48
|
||||
type: TRANSPARENT_BINARY
|
||||
- id: web_tiff_image
|
||||
file: https://upload.wikimedia.org/wikipedia/commons/b/b6/SIPI_Jelly_Beans_4.1.07.tiff
|
||||
type: RGB24
|
||||
resize: 48x48
|
||||
- id: web_redirect_image
|
||||
file: https://avatars.githubusercontent.com/u/3060199?s=48&v=4
|
||||
type: RGB24
|
||||
resize: 48x48
|
||||
|
||||
- id: mdi_alert
|
||||
file: mdi:alert-circle-outline
|
||||
resize: 50x50
|
||||
- id: another_alert_icon
|
||||
file: mdi:alert-outline
|
||||
type: BINARY
|
||||
|
||||
graph:
|
||||
- id: my_graph
|
||||
sensor: ha_hello_world_temperature
|
||||
duration: 1h
|
||||
width: 100
|
||||
height: 100
|
||||
|
||||
cap1188:
|
||||
id: cap1188_component
|
||||
address: 0x29
|
||||
touch_threshold: 0x20
|
||||
allow_multiple_touches: true
|
||||
reset_pin: 14
|
||||
|
||||
switch:
|
||||
- platform: template
|
||||
name: Test BLE Write Action
|
||||
turn_on_action:
|
||||
- ble_client.ble_write:
|
||||
id: airthings01
|
||||
service_uuid: F61E3BE9-2826-A81B-970A-4D4DECFABBAE
|
||||
characteristic_uuid: 6490FAFE-0734-732C-8705-91B653A081FC
|
||||
value: [0x01, 0xab, 0xff]
|
||||
- ble_client.ble_write:
|
||||
id: airthings01
|
||||
service_uuid: F61E3BE9-2826-A81B-970A-4D4DECFABBAE
|
||||
characteristic_uuid: 6490FAFE-0734-732C-8705-91B653A081FC
|
||||
value: !lambda |-
|
||||
return {0x13, 0x37};
|
||||
|
||||
esp32_ble_server:
|
||||
id: ble
|
||||
manufacturer_data: [0x72, 0x4, 0x00, 0x23]
|
||||
|
||||
text:
|
||||
- platform: template
|
||||
name: My Text
|
||||
id: my_text
|
||||
min_length: 0
|
||||
max_length: 20
|
||||
mode: text
|
||||
pattern: "[a-z]+"
|
||||
optimistic: true
|
||||
restore_value: true
|
||||
initial_value: "Hello World"
|
||||
- platform: copy
|
||||
name: My Text Copy
|
||||
id: my_text_copy
|
||||
source_id: my_text
|
||||
mode: password
|
||||
|
|
@ -1,734 +0,0 @@
|
|||
---
|
||||
esphome:
|
||||
name: $device_name
|
||||
comment: $device_comment
|
||||
build_path: build/test3.1
|
||||
includes:
|
||||
- custom.h
|
||||
|
||||
esp8266:
|
||||
board: d1_mini
|
||||
|
||||
substitutions:
|
||||
device_name: test3-1
|
||||
device_comment: test3-1 device
|
||||
min_sub: "0.03"
|
||||
max_sub: "12.0%"
|
||||
|
||||
api:
|
||||
|
||||
wifi:
|
||||
ssid: "MySSID"
|
||||
password: "password1"
|
||||
|
||||
network:
|
||||
enable_ipv6: true
|
||||
|
||||
web_server:
|
||||
port: 80
|
||||
version: 2
|
||||
|
||||
i2c:
|
||||
sda:
|
||||
allow_other_uses: true
|
||||
number: 4
|
||||
scl:
|
||||
allow_other_uses: true
|
||||
number: 5
|
||||
scan: false
|
||||
|
||||
spi:
|
||||
clk_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO12
|
||||
mosi_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO13
|
||||
miso_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO14
|
||||
|
||||
ota:
|
||||
- platform: esphome
|
||||
version: 2
|
||||
|
||||
logger:
|
||||
|
||||
debug:
|
||||
|
||||
sensor:
|
||||
- platform: apds9960
|
||||
type: proximity
|
||||
name: APDS9960 Proximity
|
||||
- platform: vl53l0x
|
||||
name: VL53L0x Distance
|
||||
address: 0x29
|
||||
update_interval: 60s
|
||||
enable_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO13
|
||||
timeout: 200us
|
||||
- platform: apds9960
|
||||
type: clear
|
||||
name: APDS9960 Clear
|
||||
- platform: apds9960
|
||||
type: red
|
||||
name: APDS9960 Red
|
||||
- platform: apds9960
|
||||
type: green
|
||||
name: APDS9960 Green
|
||||
- platform: apds9960
|
||||
type: blue
|
||||
name: APDS9960 Blue
|
||||
|
||||
- platform: aht10
|
||||
temperature:
|
||||
name: Temperature
|
||||
humidity:
|
||||
name: Humidity
|
||||
- platform: am2320
|
||||
temperature:
|
||||
name: Temperature
|
||||
humidity:
|
||||
name: Humidity
|
||||
- platform: adc
|
||||
pin: VCC
|
||||
id: my_sensor
|
||||
filters:
|
||||
- offset: 5.0
|
||||
- multiply: 2.0
|
||||
- filter_out: NAN
|
||||
- sliding_window_moving_average:
|
||||
- exponential_moving_average:
|
||||
- quantile:
|
||||
window_size: 5
|
||||
send_every: 5
|
||||
send_first_at: 3
|
||||
quantile: .8
|
||||
- lambda: "return 0;"
|
||||
- delta: 100
|
||||
- throttle: 100ms
|
||||
- debounce: 500s
|
||||
- timeout: 10min
|
||||
- timeout:
|
||||
timeout: 10min
|
||||
value: 0
|
||||
- calibrate_linear:
|
||||
method: exact
|
||||
datapoints:
|
||||
- -1 -> 3
|
||||
- 0.0 -> 1.0
|
||||
- 1.0 -> 2.0
|
||||
- 2.0 -> 3.0
|
||||
- calibrate_polynomial:
|
||||
degree: 3
|
||||
datapoints:
|
||||
- 0 -> 0
|
||||
- 100 -> 200
|
||||
- 400 -> 500
|
||||
- -50 -> -1000
|
||||
- -100 -> -10000
|
||||
- platform: cd74hc4067
|
||||
id: cd74hc4067_0
|
||||
number: 0
|
||||
sensor: my_sensor
|
||||
- platform: resistance
|
||||
sensor: my_sensor
|
||||
configuration: DOWNSTREAM
|
||||
resistor: 10kΩ
|
||||
reference_voltage: 3.3V
|
||||
name: Resistance
|
||||
id: resist
|
||||
- platform: ntc
|
||||
sensor: resist
|
||||
name: NTC Sensor
|
||||
calibration:
|
||||
b_constant: 3950
|
||||
reference_resistance: 10k
|
||||
reference_temperature: 25°C
|
||||
- platform: ntc
|
||||
sensor: resist
|
||||
name: NTC Sensor2
|
||||
calibration:
|
||||
- 10.0kOhm -> 25°C
|
||||
- 27.219kOhm -> 0°C
|
||||
- 14.674kOhm -> 15°C
|
||||
- platform: ct_clamp
|
||||
sensor: my_sensor
|
||||
name: CT Clamp
|
||||
sample_duration: 500ms
|
||||
update_interval: 5s
|
||||
|
||||
- platform: tcs34725
|
||||
red_channel:
|
||||
name: Red Channel
|
||||
green_channel:
|
||||
name: Green Channel
|
||||
blue_channel:
|
||||
name: Blue Channel
|
||||
clear_channel:
|
||||
name: Clear Channel
|
||||
illuminance:
|
||||
name: Illuminance
|
||||
color_temperature:
|
||||
name: Color Temperature
|
||||
integration_time: 614ms
|
||||
gain: 60x
|
||||
- platform: custom
|
||||
lambda: |-
|
||||
auto s = new CustomSensor();
|
||||
App.register_component(s);
|
||||
return {s};
|
||||
sensors:
|
||||
- id: custom_sensor
|
||||
name: Custom Sensor
|
||||
|
||||
- platform: ade7953_i2c
|
||||
irq_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO16
|
||||
voltage:
|
||||
name: ADE7953 Voltage
|
||||
id: ade7953_voltage
|
||||
current_a:
|
||||
name: ADE7953 Current A
|
||||
id: ade7953_current_a
|
||||
current_b:
|
||||
name: ADE7953 Current B
|
||||
id: ade7953_current_b
|
||||
power_factor_a:
|
||||
name: "ADE7953 Power Factor A"
|
||||
power_factor_b:
|
||||
name: "ADE7953 Power Factor B"
|
||||
apparent_power_a:
|
||||
name: "ADE7953 Apparent Power A"
|
||||
apparent_power_b:
|
||||
name: "ADE7953 Apparent Power B"
|
||||
active_power_a:
|
||||
name: ADE7953 Active Power A
|
||||
active_power_b:
|
||||
name: ADE7953 Active Power B
|
||||
reactive_power_a:
|
||||
name: "ADE7953 Reactive Power A"
|
||||
reactive_power_b:
|
||||
name: "ADE7953 Reactive Power B"
|
||||
update_interval: 1s
|
||||
|
||||
- platform: ade7953_spi
|
||||
cs_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO04
|
||||
irq_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO16
|
||||
voltage:
|
||||
name: ADE7953 Voltage
|
||||
current_a:
|
||||
name: ADE7953 Current A
|
||||
current_b:
|
||||
name: ADE7953 Current B
|
||||
power_factor_a:
|
||||
name: "ADE7953 Power Factor A"
|
||||
power_factor_b:
|
||||
name: "ADE7953 Power Factor B"
|
||||
apparent_power_a:
|
||||
name: "ADE7953 Apparent Power A"
|
||||
apparent_power_b:
|
||||
name: "ADE7953 Apparent Power B"
|
||||
active_power_a:
|
||||
name: ADE7953 Active Power A
|
||||
active_power_b:
|
||||
name: ADE7953 Active Power B
|
||||
reactive_power_a:
|
||||
name: "ADE7953 Reactive Power A"
|
||||
reactive_power_b:
|
||||
name: "ADE7953 Reactive Power B"
|
||||
update_interval: 1s
|
||||
|
||||
- platform: tmp102
|
||||
name: TMP102 Temperature
|
||||
- platform: hm3301
|
||||
pm_1_0:
|
||||
name: PM1.0
|
||||
pm_2_5:
|
||||
name: PM2.5
|
||||
pm_10_0:
|
||||
name: PM10.0
|
||||
aqi:
|
||||
name: AQI
|
||||
calculation_type: AQI
|
||||
- platform: ezo
|
||||
id: ph_ezo
|
||||
address: 99
|
||||
unit_of_measurement: pH
|
||||
- platform: tof10120
|
||||
name: Distance sensor
|
||||
update_interval: 5s
|
||||
|
||||
- platform: mlx90393
|
||||
oversampling: 1
|
||||
filter: 0
|
||||
gain: 3X
|
||||
x_axis:
|
||||
name: mlxxaxis
|
||||
y_axis:
|
||||
name: mlxyaxis
|
||||
z_axis:
|
||||
name: mlxzaxis
|
||||
resolution: 17BIT
|
||||
temperature:
|
||||
name: mlxtemp
|
||||
oversampling: 2
|
||||
|
||||
- platform: adc128s102
|
||||
id: adc128s102_channel_0
|
||||
channel: 0
|
||||
|
||||
- platform: ade7880
|
||||
irq0_pin:
|
||||
number: GPIO13
|
||||
allow_other_uses: true
|
||||
irq1_pin:
|
||||
number: GPIO5
|
||||
allow_other_uses: true
|
||||
reset_pin:
|
||||
number: GPIO16
|
||||
allow_other_uses: true
|
||||
frequency: 60Hz
|
||||
phase_a:
|
||||
name: Channel A
|
||||
voltage: Voltage
|
||||
current: Current
|
||||
active_power: Active Power
|
||||
power_factor: Power Factor
|
||||
forward_active_energy: Forward Active Energy
|
||||
reverse_active_energy: Reverse Active Energy
|
||||
calibration:
|
||||
current_gain: 3116628
|
||||
voltage_gain: -757178
|
||||
power_gain: -1344457
|
||||
phase_angle: 188
|
||||
phase_b:
|
||||
name: Channel B
|
||||
voltage: Voltage
|
||||
current: Current
|
||||
active_power: Active Power
|
||||
power_factor: Power Factor
|
||||
forward_active_energy: Forward Active Energy
|
||||
reverse_active_energy: Reverse Active Energy
|
||||
calibration:
|
||||
current_gain: 3133655
|
||||
voltage_gain: -755235
|
||||
power_gain: -1345638
|
||||
phase_angle: 188
|
||||
phase_c:
|
||||
name: Channel C
|
||||
voltage: Voltage
|
||||
current: Current
|
||||
active_power: Active Power
|
||||
power_factor: Power Factor
|
||||
forward_active_energy: Forward Active Energy
|
||||
reverse_active_energy: Reverse Active Energy
|
||||
calibration:
|
||||
current_gain: 3111158
|
||||
voltage_gain: -743813
|
||||
power_gain: -1351437
|
||||
phase_angle: 180
|
||||
neutral:
|
||||
name: Neutral
|
||||
current: Current
|
||||
calibration:
|
||||
current_gain: 3189
|
||||
|
||||
apds9960:
|
||||
address: 0x20
|
||||
update_interval: 60s
|
||||
|
||||
binary_sensor:
|
||||
- platform: apds9960
|
||||
direction: up
|
||||
name: APDS9960 Up
|
||||
device_class: motion
|
||||
filters:
|
||||
- invert
|
||||
- delayed_on: 20ms
|
||||
- delayed_off: 20ms
|
||||
- lambda: "return false;"
|
||||
on_state:
|
||||
- logger.log: New state
|
||||
id: my_binary_sensor
|
||||
- platform: apds9960
|
||||
direction: down
|
||||
name: APDS9960 Down
|
||||
- platform: apds9960
|
||||
direction: left
|
||||
name: APDS9960 Left
|
||||
- platform: apds9960
|
||||
direction: right
|
||||
name: APDS9960 Right
|
||||
|
||||
- platform: ttp229_lsf
|
||||
channel: 1
|
||||
name: TTP229 LSF Test
|
||||
- platform: ttp229_bsf
|
||||
channel: 1
|
||||
name: TTP229 BSF Test
|
||||
- platform: custom
|
||||
lambda: |-
|
||||
auto s = new CustomBinarySensor();
|
||||
App.register_component(s);
|
||||
return {s};
|
||||
binary_sensors:
|
||||
- id: custom_binary_sensor
|
||||
name: Custom Binary Sensor
|
||||
|
||||
- platform: template
|
||||
id: cover_toggle
|
||||
on_press:
|
||||
then:
|
||||
- cover.toggle: time_based_cover
|
||||
- cover.toggle: endstop_cover
|
||||
- cover.toggle: current_based_cover
|
||||
|
||||
globals:
|
||||
- id: my_global_string
|
||||
type: std::string
|
||||
initial_value: '""'
|
||||
|
||||
text_sensor:
|
||||
- platform: custom
|
||||
lambda: |-
|
||||
auto s = new CustomTextSensor();
|
||||
App.register_component(s);
|
||||
return {s};
|
||||
text_sensors:
|
||||
- id: custom_text_sensor
|
||||
name: Custom Text Sensor
|
||||
|
||||
sm2135:
|
||||
data_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO12
|
||||
clock_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO14
|
||||
rgb_current: 20mA
|
||||
cw_current: 60mA
|
||||
|
||||
grove_tb6612fng:
|
||||
id: test_motor
|
||||
address: 0x14
|
||||
|
||||
switch:
|
||||
- platform: gpio
|
||||
id: gpio_switch1
|
||||
pin:
|
||||
mcp23xxx: mcp23017_hub
|
||||
number: 0
|
||||
mode: OUTPUT
|
||||
interlock: &interlock [gpio_switch1, gpio_switch2, gpio_switch3]
|
||||
- platform: gpio
|
||||
id: gpio_switch2
|
||||
pin:
|
||||
mcp23xxx: mcp23008_hub
|
||||
number: 0
|
||||
mode: OUTPUT
|
||||
interlock: *interlock
|
||||
- platform: gpio
|
||||
id: gpio_switch3
|
||||
pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO1
|
||||
interlock: *interlock
|
||||
- platform: custom
|
||||
lambda: |-
|
||||
auto s = new CustomSwitch();
|
||||
return {s};
|
||||
switches:
|
||||
- id: custom_switch
|
||||
name: Custom Switch
|
||||
- platform: template
|
||||
name: open_vent
|
||||
id: open_vent
|
||||
optimistic: true
|
||||
on_turn_on:
|
||||
then:
|
||||
- grove_tb6612fng.run:
|
||||
channel: 1
|
||||
speed: 255
|
||||
direction: BACKWARD
|
||||
id: test_motor
|
||||
|
||||
custom_component:
|
||||
lambda: |-
|
||||
auto s = new CustomComponent();
|
||||
s->set_update_interval(15000);
|
||||
return {s};
|
||||
|
||||
stepper:
|
||||
- platform: uln2003
|
||||
id: my_stepper
|
||||
pin_a:
|
||||
allow_other_uses: true
|
||||
number: GPIO12
|
||||
pin_b:
|
||||
allow_other_uses: true
|
||||
number: GPIO13
|
||||
pin_c:
|
||||
allow_other_uses: true
|
||||
number: GPIO14
|
||||
pin_d:
|
||||
allow_other_uses: true
|
||||
number: GPIO15
|
||||
sleep_when_done: false
|
||||
step_mode: HALF_STEP
|
||||
max_speed: 250 steps/s
|
||||
acceleration: inf
|
||||
deceleration: inf
|
||||
- platform: a4988
|
||||
id: my_stepper2
|
||||
step_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO1
|
||||
dir_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO2
|
||||
max_speed: 0.1 steps/s
|
||||
acceleration: 10 steps/s^2
|
||||
deceleration: 10 steps/s^2
|
||||
|
||||
interval:
|
||||
interval: 5s
|
||||
then:
|
||||
- logger.log: Interval Run
|
||||
- stepper.set_target:
|
||||
id: my_stepper2
|
||||
target: 500
|
||||
- stepper.set_target:
|
||||
id: my_stepper
|
||||
target: !lambda "return 0;"
|
||||
- stepper.report_position:
|
||||
id: my_stepper2
|
||||
position: 0
|
||||
- stepper.report_position:
|
||||
id: my_stepper
|
||||
position: !lambda "return 50/100.0;"
|
||||
|
||||
cover:
|
||||
- platform: endstop
|
||||
name: Endstop Cover
|
||||
id: endstop_cover
|
||||
stop_action:
|
||||
- switch.turn_on: gpio_switch1
|
||||
open_endstop: my_binary_sensor
|
||||
open_action:
|
||||
- switch.turn_on: gpio_switch1
|
||||
open_duration: 5min
|
||||
close_endstop: my_binary_sensor
|
||||
close_action:
|
||||
- switch.turn_on: gpio_switch2
|
||||
- output.set_level:
|
||||
id: out
|
||||
level: 50%
|
||||
- output.esp8266_pwm.set_frequency:
|
||||
id: out
|
||||
frequency: 500.0Hz
|
||||
- output.esp8266_pwm.set_frequency:
|
||||
id: out
|
||||
frequency: !lambda "return 500.0;"
|
||||
- servo.write:
|
||||
id: my_servo
|
||||
level: -100%
|
||||
- servo.write:
|
||||
id: my_servo
|
||||
level: !lambda "return -1.0;"
|
||||
- delay: 2s
|
||||
- servo.detach: my_servo
|
||||
close_duration: 4.5min
|
||||
max_duration: 10min
|
||||
- platform: time_based
|
||||
name: Time Based Cover
|
||||
id: time_based_cover
|
||||
stop_action:
|
||||
- switch.turn_on: gpio_switch1
|
||||
open_action:
|
||||
- switch.turn_on: gpio_switch1
|
||||
open_duration: 5min
|
||||
close_action:
|
||||
- switch.turn_on: gpio_switch2
|
||||
close_duration: 4.5min
|
||||
- platform: current_based
|
||||
name: Current Based Cover
|
||||
id: current_based_cover
|
||||
open_sensor: ade7953_current_a
|
||||
open_moving_current_threshold: 0.5
|
||||
open_obstacle_current_threshold: 0.8
|
||||
open_duration: 12s
|
||||
open_action:
|
||||
- switch.turn_on: gpio_switch1
|
||||
close_sensor: ade7953_current_b
|
||||
close_moving_current_threshold: 0.5
|
||||
close_obstacle_current_threshold: 0.8
|
||||
close_duration: 10s
|
||||
close_action:
|
||||
- switch.turn_on: gpio_switch2
|
||||
stop_action:
|
||||
- switch.turn_off: gpio_switch1
|
||||
- switch.turn_off: gpio_switch2
|
||||
obstacle_rollback: 30%
|
||||
start_sensing_delay: 0.8s
|
||||
malfunction_detection: true
|
||||
malfunction_action:
|
||||
then:
|
||||
- logger.log: Malfunction Detected
|
||||
- platform: template
|
||||
name: Template Cover with Tilt
|
||||
tilt_lambda: "return 0.5;"
|
||||
tilt_action:
|
||||
- output.set_level:
|
||||
id: out
|
||||
level: !lambda "return tilt;"
|
||||
position_action:
|
||||
- output.set_level:
|
||||
id: out
|
||||
level: !lambda "return pos;"
|
||||
|
||||
output:
|
||||
- platform: esp8266_pwm
|
||||
id: out
|
||||
pin:
|
||||
number: D3
|
||||
frequency: 50Hz
|
||||
- platform: esp8266_pwm
|
||||
id: out2
|
||||
pin:
|
||||
allow_other_uses: true
|
||||
number: D4
|
||||
- platform: custom
|
||||
type: binary
|
||||
lambda: |-
|
||||
auto s = new CustomBinaryOutput();
|
||||
App.register_component(s);
|
||||
return {s};
|
||||
outputs:
|
||||
- id: custom_binary
|
||||
- platform: sigma_delta_output
|
||||
id: sddac
|
||||
update_interval: 60s
|
||||
pin:
|
||||
allow_other_uses: true
|
||||
number: D4
|
||||
turn_on_action:
|
||||
then:
|
||||
- logger.log: "Turned on"
|
||||
turn_off_action:
|
||||
then:
|
||||
- logger.log: "Turned off"
|
||||
state_change_action:
|
||||
then:
|
||||
- logger.log:
|
||||
format: "Changed state: %d"
|
||||
args: ["state"]
|
||||
- platform: custom
|
||||
type: float
|
||||
lambda: |-
|
||||
auto s = new CustomFloatOutput();
|
||||
App.register_component(s);
|
||||
return {s};
|
||||
outputs:
|
||||
- id: custom_float
|
||||
- platform: slow_pwm
|
||||
pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO5
|
||||
id: my_slow_pwm
|
||||
period: 15s
|
||||
restart_cycle_on_state_change: false
|
||||
- platform: sm2135
|
||||
id: sm2135_0
|
||||
channel: 0
|
||||
- platform: sm2135
|
||||
id: sm2135_1
|
||||
channel: 1
|
||||
- platform: sm2135
|
||||
id: sm2135_2
|
||||
channel: 2
|
||||
- platform: sm2135
|
||||
id: sm2135_3
|
||||
channel: 3
|
||||
- platform: sm2135
|
||||
id: sm2135_4
|
||||
channel: 4
|
||||
|
||||
mcp23017:
|
||||
id: mcp23017_hub
|
||||
|
||||
mcp23008:
|
||||
id: mcp23008_hub
|
||||
|
||||
light:
|
||||
- platform: hbridge
|
||||
name: Icicle Lights
|
||||
pin_a: out
|
||||
pin_b: out2
|
||||
|
||||
servo:
|
||||
id: my_servo
|
||||
output: out
|
||||
restore: true
|
||||
min_level: $min_sub
|
||||
max_level: $max_sub
|
||||
|
||||
ttp229_lsf:
|
||||
|
||||
ttp229_bsf:
|
||||
sdo_pin:
|
||||
allow_other_uses: true
|
||||
number: D2
|
||||
scl_pin:
|
||||
allow_other_uses: true
|
||||
number: D1
|
||||
|
||||
display:
|
||||
- platform: max7219digit
|
||||
cs_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO15
|
||||
num_chips: 4
|
||||
rotate_chip: 0
|
||||
intensity: 10
|
||||
scroll_mode: STOP
|
||||
id: my_matrix
|
||||
lambda: |-
|
||||
it.printdigit("hello");
|
||||
|
||||
button:
|
||||
- platform: output
|
||||
id: output_button
|
||||
output: out
|
||||
duration: 100ms
|
||||
- platform: wake_on_lan
|
||||
target_mac_address: 12:34:56:78:90:ab
|
||||
name: wol_test_1
|
||||
id: wol_1
|
||||
- platform: factory_reset
|
||||
name: Restart Button (Factory Default Settings)
|
||||
|
||||
cd74hc4067:
|
||||
pin_s0:
|
||||
allow_other_uses: true
|
||||
number: GPIO12
|
||||
pin_s1:
|
||||
allow_other_uses: true
|
||||
number: GPIO13
|
||||
pin_s2:
|
||||
allow_other_uses: true
|
||||
number: GPIO14
|
||||
pin_s3:
|
||||
allow_other_uses: true
|
||||
number: GPIO15
|
||||
|
||||
adc128s102:
|
||||
cs_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO12
|
||||
1432
tests/test3.yaml
1432
tests/test3.yaml
File diff suppressed because it is too large
Load diff
998
tests/test4.yaml
998
tests/test4.yaml
|
|
@ -1,998 +0,0 @@
|
|||
---
|
||||
esphome:
|
||||
name: $devicename
|
||||
platform: ESP32
|
||||
board: nodemcu-32s
|
||||
build_path: build/test4
|
||||
|
||||
substitutions:
|
||||
devicename: test-4
|
||||
|
||||
ethernet:
|
||||
type: LAN8720
|
||||
mdc_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO23
|
||||
mdio_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO25
|
||||
clk_mode: GPIO0_IN
|
||||
phy_addr: 0
|
||||
power_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO25
|
||||
manual_ip:
|
||||
static_ip: 192.168.178.56
|
||||
gateway: 192.168.178.1
|
||||
subnet: 255.255.255.0
|
||||
domain: .local
|
||||
|
||||
network:
|
||||
enable_ipv6: true
|
||||
|
||||
mqtt:
|
||||
broker: test.mosquitto.org
|
||||
port: 1883
|
||||
discovery: true
|
||||
discovery_prefix: homeassistant
|
||||
topic_prefix:
|
||||
|
||||
api:
|
||||
|
||||
i2c:
|
||||
sda:
|
||||
allow_other_uses: true
|
||||
number: 21
|
||||
scl:
|
||||
allow_other_uses: true
|
||||
number: 22
|
||||
scan: false
|
||||
|
||||
spi:
|
||||
- id: spi_id_1
|
||||
clk_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO21
|
||||
mosi_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO22
|
||||
miso_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO23
|
||||
interface: hardware
|
||||
- id: spi_id_2
|
||||
clk_pin:
|
||||
number: GPIO32
|
||||
mosi_pin:
|
||||
number: GPIO33
|
||||
interface: hardware
|
||||
|
||||
uart:
|
||||
- id: uart115200
|
||||
tx_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO22
|
||||
rx_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO23
|
||||
baud_rate: 115200
|
||||
- id: uart9600
|
||||
tx_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO25
|
||||
rx_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO26
|
||||
baud_rate: 9600
|
||||
- id: uart_a02yyuw
|
||||
tx_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO22
|
||||
rx_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO23
|
||||
baud_rate: 9600
|
||||
- id: uart_he60r
|
||||
tx_pin:
|
||||
number: GPIO18
|
||||
allow_other_uses: true
|
||||
rx_pin:
|
||||
number: GPIO36
|
||||
allow_other_uses: true
|
||||
baud_rate: 1200
|
||||
parity: EVEN
|
||||
|
||||
safe_mode:
|
||||
|
||||
ota:
|
||||
- platform: esphome
|
||||
port: 3286
|
||||
|
||||
logger:
|
||||
level: DEBUG
|
||||
|
||||
debug:
|
||||
|
||||
web_server:
|
||||
ota: false
|
||||
auth:
|
||||
username: admin
|
||||
password: admin
|
||||
include_internal: true
|
||||
|
||||
time:
|
||||
- platform: sntp
|
||||
id: sntp_time
|
||||
|
||||
tuya:
|
||||
time_id: sntp_time
|
||||
uart_id: uart115200
|
||||
status_pin:
|
||||
number: GPIO5
|
||||
inverted: true
|
||||
allow_other_uses: true
|
||||
|
||||
select:
|
||||
- platform: tuya
|
||||
id: tuya_select
|
||||
enum_datapoint: 42
|
||||
options:
|
||||
0: Internal
|
||||
1: Floor
|
||||
2: Both
|
||||
|
||||
pipsolar:
|
||||
id: inverter0
|
||||
uart_id: uart115200
|
||||
|
||||
pylontech:
|
||||
- id: pylontech0
|
||||
uart_id: uart115200
|
||||
- id: pylontech1
|
||||
uart_id: uart115200
|
||||
|
||||
sx1509:
|
||||
- id: sx1509_hub
|
||||
address: 0x3E
|
||||
|
||||
mcp3204:
|
||||
spi_id: spi_id_1
|
||||
cs_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO23
|
||||
|
||||
dac7678:
|
||||
address: 0x4A
|
||||
id: dac7678_hub1
|
||||
internal_reference: true
|
||||
|
||||
sensor:
|
||||
- platform: pylontech
|
||||
pylontech_id: pylontech0
|
||||
battery: 1
|
||||
voltage:
|
||||
id: pyl01_voltage
|
||||
current:
|
||||
id: pyl01_current
|
||||
coulomb:
|
||||
id: pyl01_soc
|
||||
mos_temperature:
|
||||
id: pyl01_mos_temperature
|
||||
- platform: pylontech
|
||||
pylontech_id: pylontech1
|
||||
battery: 1
|
||||
voltage:
|
||||
id: pyl13_voltage
|
||||
temperature_low:
|
||||
id: pyl13_temperature_low
|
||||
temperature_high:
|
||||
id: pyl13_temperature_high
|
||||
voltage_low:
|
||||
id: pyl13_voltage_low
|
||||
voltage_high:
|
||||
id: pyl13_voltage_high
|
||||
- platform: homeassistant
|
||||
entity_id: sensor.hello_world
|
||||
id: ha_hello_world
|
||||
- platform: tuya
|
||||
id: tuya_sensor
|
||||
sensor_datapoint: 1
|
||||
- platform: pipsolar
|
||||
pipsolar_id: inverter0
|
||||
grid_rating_voltage:
|
||||
id: inverter0_grid_rating_voltage
|
||||
name: inverter0_grid_rating_voltage
|
||||
grid_rating_current:
|
||||
id: inverter0_grid_rating_current
|
||||
name: inverter0_grid_rating_current
|
||||
ac_output_rating_voltage:
|
||||
id: inverter0_ac_output_rating_voltage
|
||||
name: inverter0_ac_output_rating_voltage
|
||||
ac_output_rating_frequency:
|
||||
id: inverter0_ac_output_rating_frequency
|
||||
name: inverter0_ac_output_rating_frequency
|
||||
ac_output_rating_current:
|
||||
id: inverter0_ac_output_rating_current
|
||||
name: inverter0_ac_output_rating_current
|
||||
ac_output_rating_apparent_power:
|
||||
id: inverter0_ac_output_rating_apparent_power
|
||||
name: inverter0_ac_output_rating_apparent_power
|
||||
ac_output_rating_active_power:
|
||||
id: inverter0_ac_output_rating_active_power
|
||||
name: inverter0_ac_output_rating_active_power
|
||||
battery_rating_voltage:
|
||||
id: inverter0_battery_rating_voltage
|
||||
name: inverter0_battery_rating_voltage
|
||||
battery_recharge_voltage:
|
||||
id: inverter0_battery_recharge_voltage
|
||||
name: inverter0_battery_recharge_voltage
|
||||
battery_under_voltage:
|
||||
id: inverter0_battery_under_voltage
|
||||
name: inverter0_battery_under_voltage
|
||||
battery_bulk_voltage:
|
||||
id: inverter0_battery_bulk_voltage
|
||||
name: inverter0_battery_bulk_voltage
|
||||
battery_float_voltage:
|
||||
id: inverter0_battery_float_voltage
|
||||
name: inverter0_battery_float_voltage
|
||||
battery_type:
|
||||
id: inverter0_battery_type
|
||||
name: inverter0_battery_type
|
||||
current_max_ac_charging_current:
|
||||
id: inverter0_current_max_ac_charging_current
|
||||
name: inverter0_current_max_ac_charging_current
|
||||
current_max_charging_current:
|
||||
id: inverter0_current_max_charging_current
|
||||
name: inverter0_current_max_charging_current
|
||||
input_voltage_range:
|
||||
id: inverter0_input_voltage_range
|
||||
name: inverter0_input_voltage_range
|
||||
output_source_priority:
|
||||
id: inverter0_output_source_priority
|
||||
name: inverter0_output_source_priority
|
||||
charger_source_priority:
|
||||
id: inverter0_charger_source_priority
|
||||
name: inverter0_charger_source_priority
|
||||
parallel_max_num:
|
||||
id: inverter0_parallel_max_num
|
||||
name: inverter0_parallel_max_num
|
||||
machine_type:
|
||||
id: inverter0_machine_type
|
||||
name: inverter0_machine_type
|
||||
topology:
|
||||
id: inverter0_topology
|
||||
name: inverter0_topology
|
||||
output_mode:
|
||||
id: inverter0_output_mode
|
||||
name: inverter0_output_mode
|
||||
battery_redischarge_voltage:
|
||||
id: inverter0_battery_redischarge_voltage
|
||||
name: inverter0_battery_redischarge_voltage
|
||||
pv_ok_condition_for_parallel:
|
||||
id: inverter0_pv_ok_condition_for_parallel
|
||||
name: inverter0_pv_ok_condition_for_parallel
|
||||
pv_power_balance:
|
||||
id: inverter0_pv_power_balance
|
||||
name: inverter0_pv_power_balance
|
||||
grid_voltage:
|
||||
id: inverter0_grid_voltage
|
||||
name: inverter0_grid_voltage
|
||||
grid_frequency:
|
||||
id: inverter0_grid_frequency
|
||||
name: inverter0_grid_frequency
|
||||
ac_output_voltage:
|
||||
id: inverter0_ac_output_voltage
|
||||
name: inverter0_ac_output_voltage
|
||||
ac_output_frequency:
|
||||
id: inverter0_ac_output_frequency
|
||||
name: inverter0_ac_output_frequency
|
||||
ac_output_apparent_power:
|
||||
id: inverter0_ac_output_apparent_power
|
||||
name: inverter0_ac_output_apparent_power
|
||||
ac_output_active_power:
|
||||
id: inverter0_ac_output_active_power
|
||||
name: inverter0_ac_output_active_power
|
||||
output_load_percent:
|
||||
id: inverter0_output_load_percent
|
||||
name: inverter0_output_load_percent
|
||||
bus_voltage:
|
||||
id: inverter0_bus_voltage
|
||||
name: inverter0_bus_voltage
|
||||
battery_voltage:
|
||||
id: inverter0_battery_voltage
|
||||
name: inverter0_battery_voltage
|
||||
battery_charging_current:
|
||||
id: inverter0_battery_charging_current
|
||||
name: inverter0_battery_charging_current
|
||||
battery_capacity_percent:
|
||||
id: inverter0_battery_capacity_percent
|
||||
name: inverter0_battery_capacity_percent
|
||||
inverter_heat_sink_temperature:
|
||||
id: inverter0_inverter_heat_sink_temperature
|
||||
name: inverter0_inverter_heat_sink_temperature
|
||||
pv_input_current_for_battery:
|
||||
id: inverter0_pv_input_current_for_battery
|
||||
name: inverter0_pv_input_current_for_battery
|
||||
pv_input_voltage:
|
||||
id: inverter0_pv_input_voltage
|
||||
name: inverter0_pv_input_voltage
|
||||
battery_voltage_scc:
|
||||
id: inverter0_battery_voltage_scc
|
||||
name: inverter0_battery_voltage_scc
|
||||
battery_discharge_current:
|
||||
id: inverter0_battery_discharge_current
|
||||
name: inverter0_battery_discharge_current
|
||||
battery_voltage_offset_for_fans_on:
|
||||
id: inverter0_battery_voltage_offset_for_fans_on
|
||||
name: inverter0_battery_voltage_offset_for_fans_on
|
||||
eeprom_version:
|
||||
id: inverter0_eeprom_version
|
||||
name: inverter0_eeprom_version
|
||||
pv_charging_power:
|
||||
id: inverter0_pv_charging_power
|
||||
name: inverter0_pv_charging_power
|
||||
- platform: hrxl_maxsonar_wr
|
||||
name: Rainwater Tank Level
|
||||
uart_id: uart115200
|
||||
filters:
|
||||
- sliding_window_moving_average:
|
||||
window_size: 12
|
||||
send_every: 12
|
||||
- or:
|
||||
- throttle: 20min
|
||||
- delta: 0.02
|
||||
- platform: mcp3204
|
||||
name: MCP3204 Pin 1
|
||||
number: 1
|
||||
id: mcp_sensor
|
||||
- platform: copy
|
||||
source_id: mcp_sensor
|
||||
name: MCP binary sensor copy
|
||||
- platform: ufire_ec
|
||||
id: ufire_ec_board
|
||||
temperature:
|
||||
name: Ufire Temperature
|
||||
ec:
|
||||
name: Ufire EC
|
||||
temperature_compensation: 20.0
|
||||
temperature_coefficient: 0.019
|
||||
- platform: ufire_ise
|
||||
id: ufire_ise_board
|
||||
temperature:
|
||||
name: Ufire Temperature
|
||||
ph:
|
||||
name: Ufire pH
|
||||
- platform: a01nyub
|
||||
id: a01nyub_sensor
|
||||
name: "a01nyub Distance"
|
||||
uart_id: uart9600
|
||||
state_topic: "esphome/sensor/a01nyub_sensor/state"
|
||||
- platform: a02yyuw
|
||||
id: a02yyuw_sensor
|
||||
name: "a02yyuw Distance"
|
||||
uart_id: uart_a02yyuw
|
||||
state_topic: "esphome/sensor/a02yyuw_sensor/state"
|
||||
|
||||
#
|
||||
# platform sensor.apds9960 requires component apds9960
|
||||
#
|
||||
# - platform: apds9960
|
||||
# type: proximity
|
||||
# name: APDS9960 Proximity
|
||||
# - platform: apds9960
|
||||
# type: clear
|
||||
# name: APDS9960 Clear
|
||||
# - platform: apds9960
|
||||
# type: red
|
||||
# name: APDS9960 Red
|
||||
# - platform: apds9960
|
||||
# type: green
|
||||
# name: APDS9960 Green
|
||||
# - platform: apds9960
|
||||
# type: blue
|
||||
# name: APDS9960 Blue
|
||||
|
||||
binary_sensor:
|
||||
- platform: tuya
|
||||
id: tuya_binary_sensor
|
||||
sensor_datapoint: 1
|
||||
- platform: pipsolar
|
||||
pipsolar_id: inverter0
|
||||
add_sbu_priority_version:
|
||||
id: inverter0_add_sbu_priority_version
|
||||
name: inverter0_add_sbu_priority_version
|
||||
configuration_status:
|
||||
id: inverter0_configuration_status
|
||||
name: inverter0_configuration_status
|
||||
scc_firmware_version:
|
||||
id: inverter0_scc_firmware_version
|
||||
name: inverter0_scc_firmware_version
|
||||
load_status:
|
||||
id: inverter0_load_status
|
||||
name: inverter0_load_status
|
||||
battery_voltage_to_steady_while_charging:
|
||||
id: inverter0_battery_voltage_to_steady_while_charging
|
||||
name: inverter0_battery_voltage_to_steady_while_charging
|
||||
charging_status:
|
||||
id: inverter0_charging_status
|
||||
name: inverter0_charging_status
|
||||
scc_charging_status:
|
||||
id: inverter0_scc_charging_status
|
||||
name: inverter0_scc_charging_status
|
||||
ac_charging_status:
|
||||
id: inverter0_ac_charging_status
|
||||
name: inverter0_ac_charging_status
|
||||
charging_to_floating_mode:
|
||||
id: inverter0_charging_to_floating_mode
|
||||
name: inverter0_charging_to_floating_mode
|
||||
switch_on:
|
||||
id: inverter0_switch_on
|
||||
name: inverter0_switch_on
|
||||
dustproof_installed:
|
||||
id: inverter0_dustproof_installed
|
||||
name: inverter0_dustproof_installed
|
||||
silence_buzzer_open_buzzer:
|
||||
id: inverter0_silence_buzzer_open_buzzer
|
||||
name: inverter0_silence_buzzer_open_buzzer
|
||||
overload_bypass_function:
|
||||
id: inverter0_overload_bypass_function
|
||||
name: inverter0_overload_bypass_function
|
||||
lcd_escape_to_default:
|
||||
id: inverter0_lcd_escape_to_default
|
||||
name: inverter0_lcd_escape_to_default
|
||||
overload_restart_function:
|
||||
id: inverter0_overload_restart_function
|
||||
name: inverter0_overload_restart_function
|
||||
over_temperature_restart_function:
|
||||
id: inverter0_over_temperature_restart_function
|
||||
name: inverter0_over_temperature_restart_function
|
||||
backlight_on:
|
||||
id: inverter0_backlight_on
|
||||
name: inverter0_backlight_on
|
||||
- platform: template
|
||||
id: ar1
|
||||
lambda: "return {};"
|
||||
filters:
|
||||
- autorepeat:
|
||||
- delay: 2s
|
||||
time_off: 100ms
|
||||
time_on: 900ms
|
||||
- delay: 4s
|
||||
time_off: 100ms
|
||||
time_on: 400ms
|
||||
on_state:
|
||||
then:
|
||||
- lambda: 'ESP_LOGI("ar1:", "%d", x);'
|
||||
- platform: touchscreen
|
||||
touchscreen_id: xpt_touchscreen
|
||||
id: touch_key0
|
||||
x_min: 80
|
||||
x_max: 160
|
||||
y_min: 106
|
||||
y_max: 212
|
||||
on_press:
|
||||
- logger.log: Touched
|
||||
|
||||
- platform: gpio
|
||||
name: GPIO SX1509 test
|
||||
pin:
|
||||
sx1509: sx1509_hub
|
||||
number: 3
|
||||
|
||||
- platform: touchscreen
|
||||
touchscreen_id: lilygo_touchscreen
|
||||
id: touch_key1
|
||||
x_min: 0
|
||||
x_max: 100
|
||||
y_min: 0
|
||||
y_max: 100
|
||||
on_press:
|
||||
- logger.log: Touched
|
||||
- platform: gt911
|
||||
id: touch_key_911
|
||||
index: 0
|
||||
|
||||
- platform: gpio
|
||||
name: MaxIn Pin 4
|
||||
pin:
|
||||
max6956: max6956_1
|
||||
number: 4
|
||||
|
||||
mode:
|
||||
input: true
|
||||
pullup: true
|
||||
inverted: false
|
||||
|
||||
- platform: gpio
|
||||
name: XL9535 Pin 0
|
||||
pin:
|
||||
xl9535: xl9535_hub
|
||||
number: 0
|
||||
mode:
|
||||
input: true
|
||||
inverted: false
|
||||
|
||||
- platform: gpio
|
||||
name: XL9535 Pin 17
|
||||
pin:
|
||||
xl9535: xl9535_hub
|
||||
number: 17
|
||||
mode:
|
||||
input: true
|
||||
inverted: false
|
||||
|
||||
climate:
|
||||
- platform: tuya
|
||||
id: tuya_climate
|
||||
switch_datapoint: 1
|
||||
target_temperature_datapoint: 3
|
||||
current_temperature_multiplier: 0.5
|
||||
target_temperature_multiplier: 0.5
|
||||
reports_fahrenheit: true
|
||||
|
||||
switch:
|
||||
- platform: tuya
|
||||
id: tuya_switch
|
||||
switch_datapoint: 1
|
||||
- platform: pipsolar
|
||||
pipsolar_id: inverter0
|
||||
output_source_priority_utility:
|
||||
name: inverter0_output_source_priority_utility
|
||||
output_source_priority_solar:
|
||||
name: inverter0_output_source_priority_solar
|
||||
output_source_priority_battery:
|
||||
name: inverter0_output_source_priority_battery
|
||||
input_voltage_range:
|
||||
name: inverter0_input_voltage_range
|
||||
pv_ok_condition_for_parallel:
|
||||
name: inverter0_pv_ok_condition_for_parallel
|
||||
pv_power_balance:
|
||||
name: inverter0_pv_power_balance
|
||||
- platform: copy
|
||||
source_id: tuya_switch
|
||||
name: Tuya Switch Copy
|
||||
|
||||
light:
|
||||
- platform: fastled_clockless
|
||||
id: led_matrix_32x8
|
||||
name: led_matrix_32x8
|
||||
chipset: WS2812B
|
||||
pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO15
|
||||
num_leds: 256
|
||||
rgb_order: GRB
|
||||
default_transition_length: 0s
|
||||
color_correct: [50%, 50%, 50%]
|
||||
- platform: tuya
|
||||
id: tuya_light
|
||||
switch_datapoint: 1
|
||||
dimmer_datapoint: 2
|
||||
min_value_datapoint: 3
|
||||
color_temperature_datapoint: 4
|
||||
min_value: 1
|
||||
max_value: 100
|
||||
cold_white_color_temperature: 153 mireds
|
||||
warm_white_color_temperature: 500 mireds
|
||||
gamma_correct: 1
|
||||
|
||||
cover:
|
||||
- platform: tuya
|
||||
id: tuya_cover
|
||||
position_datapoint: 2
|
||||
- platform: copy
|
||||
source_id: tuya_cover
|
||||
name: Tuya Cover copy
|
||||
- platform: he60r
|
||||
uart_id: uart_he60r
|
||||
id: garage_door
|
||||
name: Garage Door
|
||||
open_duration: 14s
|
||||
close_duration: 14s
|
||||
|
||||
display:
|
||||
- platform: addressable_light
|
||||
id: led_matrix_32x8_display
|
||||
addressable_light_id: led_matrix_32x8
|
||||
width: 32
|
||||
height: 8
|
||||
pixel_mapper: |-
|
||||
if (x % 2 == 0) {
|
||||
return (x * 8) + y;
|
||||
}
|
||||
return (x * 8) + (7 - y);
|
||||
lambda: |-
|
||||
Color red = Color(0xFF0000);
|
||||
Color green = Color(0x00FF00);
|
||||
Color blue = Color(0x0000FF);
|
||||
it.rectangle(0, 0, it.get_width(), it.get_height(), red);
|
||||
it.rectangle(1, 1, it.get_width()-2, it.get_height()-2, green);
|
||||
it.rectangle(2, 2, it.get_width()-4, it.get_height()-4, blue);
|
||||
it.rectangle(3, 3, it.get_width()-6, it.get_height()-6, red);
|
||||
auto touch = id(ft63_touchscreen)->get_touch();
|
||||
if (touch) { ESP_LOGD("touch", "%d/%d", touch.value().x, touch.value().y); }
|
||||
rotation: 0°
|
||||
update_interval: 16ms
|
||||
|
||||
- platform: inkplate6
|
||||
id: inkplate_display
|
||||
greyscale: false
|
||||
partial_updating: false
|
||||
update_interval: 60s
|
||||
display_data_1_pin:
|
||||
number: GPIO5
|
||||
allow_other_uses: true
|
||||
display_data_2_pin:
|
||||
number: GPIO18
|
||||
allow_other_uses: true
|
||||
display_data_3_pin:
|
||||
number: GPIO19
|
||||
allow_other_uses: true
|
||||
display_data_5_pin:
|
||||
number: GPIO25
|
||||
allow_other_uses: true
|
||||
display_data_4_pin:
|
||||
number: GPIO23
|
||||
allow_other_uses: true
|
||||
display_data_6_pin:
|
||||
number: GPIO26
|
||||
allow_other_uses: true
|
||||
display_data_7_pin:
|
||||
number: GPIO27
|
||||
allow_other_uses: true
|
||||
ckv_pin:
|
||||
number: GPIO1
|
||||
allow_other_uses: true
|
||||
sph_pin:
|
||||
number: GPIO1
|
||||
allow_other_uses: true
|
||||
gmod_pin:
|
||||
number: GPIO1
|
||||
allow_other_uses: true
|
||||
gpio0_enable_pin:
|
||||
number: GPIO1
|
||||
allow_other_uses: true
|
||||
oe_pin:
|
||||
number: GPIO1
|
||||
allow_other_uses: true
|
||||
spv_pin:
|
||||
number: GPIO1
|
||||
allow_other_uses: true
|
||||
powerup_pin:
|
||||
number: GPIO1
|
||||
allow_other_uses: true
|
||||
wakeup_pin:
|
||||
number: GPIO1
|
||||
allow_other_uses: true
|
||||
vcom_pin:
|
||||
number: GPIO1
|
||||
allow_other_uses: true
|
||||
|
||||
number:
|
||||
- platform: tuya
|
||||
id: tuya_number
|
||||
number_datapoint: 102
|
||||
min_value: 0
|
||||
max_value: 17
|
||||
step: 1
|
||||
- platform: copy
|
||||
source_id: tuya_number
|
||||
name: Tuya Number Copy
|
||||
|
||||
text_sensor:
|
||||
- platform: pylontech
|
||||
pylontech_id: pylontech0
|
||||
battery: 1
|
||||
base_state:
|
||||
id: pyl0_base_state
|
||||
voltage_state:
|
||||
id: pyl0_voltage_state
|
||||
current_state:
|
||||
id: pyl0_current_state
|
||||
temperature_state:
|
||||
id: pyl0_temperature_state
|
||||
- platform: pipsolar
|
||||
pipsolar_id: inverter0
|
||||
device_mode:
|
||||
id: inverter0_device_mode
|
||||
name: inverter0_device_mode
|
||||
last_qpigs:
|
||||
id: inverter0_last_qpigs
|
||||
name: inverter0_last_qpigs
|
||||
last_qpiri:
|
||||
id: inverter0_last_qpiri
|
||||
name: inverter0_last_qpiri
|
||||
last_qmod:
|
||||
id: inverter0_last_qmod
|
||||
name: inverter0_last_qmod
|
||||
last_qflag:
|
||||
id: inverter0_last_qflag
|
||||
name: inverter0_last_qflag
|
||||
- platform: copy
|
||||
source_id: inverter0_device_mode
|
||||
name: Inverter Text Sensor Copy
|
||||
- platform: ethernet_info
|
||||
ip_address:
|
||||
name: IP Address
|
||||
|
||||
output:
|
||||
- platform: pipsolar
|
||||
pipsolar_id: inverter0
|
||||
battery_recharge_voltage:
|
||||
id: inverter0_battery_recharge_voltage_out
|
||||
- platform: dac7678
|
||||
dac7678_id: dac7678_hub1
|
||||
channel: 0
|
||||
id: dac7678_1_ch0
|
||||
- platform: dac7678
|
||||
dac7678_id: dac7678_hub1
|
||||
channel: 1
|
||||
id: dac7678_1_ch1
|
||||
- platform: dac7678
|
||||
dac7678_id: dac7678_hub1
|
||||
channel: 2
|
||||
id: dac7678_1_ch2
|
||||
- platform: dac7678
|
||||
dac7678_id: dac7678_hub1
|
||||
channel: 3
|
||||
id: dac7678_1_ch3
|
||||
- platform: dac7678
|
||||
dac7678_id: dac7678_hub1
|
||||
channel: 4
|
||||
id: dac7678_1_ch4
|
||||
- platform: dac7678
|
||||
dac7678_id: dac7678_hub1
|
||||
channel: 5
|
||||
id: dac7678_1_ch5
|
||||
- platform: dac7678
|
||||
dac7678_id: dac7678_hub1
|
||||
channel: 6
|
||||
id: dac7678_1_ch6
|
||||
- platform: dac7678
|
||||
dac7678_id: dac7678_hub1
|
||||
channel: 7
|
||||
id: dac7678_1_ch7
|
||||
esp32_camera:
|
||||
name: ESP-32 Camera
|
||||
data_pins:
|
||||
- number: GPIO17
|
||||
allow_other_uses: true
|
||||
- number: GPIO35
|
||||
allow_other_uses: true
|
||||
- number: GPIO34
|
||||
- number: GPIO5
|
||||
allow_other_uses: true
|
||||
- number: GPIO39
|
||||
allow_other_uses: true
|
||||
- number: GPIO18
|
||||
allow_other_uses: true
|
||||
- number: GPIO36
|
||||
allow_other_uses: true
|
||||
- number: GPIO19
|
||||
allow_other_uses: true
|
||||
vsync_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO22
|
||||
href_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO26
|
||||
pixel_clock_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO21
|
||||
external_clock:
|
||||
pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO27
|
||||
frequency: 20MHz
|
||||
i2c_pins:
|
||||
sda:
|
||||
allow_other_uses: true
|
||||
number: GPIO25
|
||||
scl:
|
||||
allow_other_uses: true
|
||||
number: GPIO23
|
||||
reset_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO15
|
||||
power_down_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO1
|
||||
resolution: 640x480
|
||||
jpeg_quality: 10
|
||||
on_image:
|
||||
then:
|
||||
- lambda: |-
|
||||
ESP_LOGD("main", "image len=%d, data=%c", image.length, image.data[0]);
|
||||
|
||||
esp32_camera_web_server:
|
||||
- port: 8080
|
||||
mode: stream
|
||||
- port: 8081
|
||||
mode: snapshot
|
||||
|
||||
external_components:
|
||||
- source: github://esphome/esphome@dev
|
||||
refresh: 1d
|
||||
components: [bh1750]
|
||||
- source: ../esphome/components
|
||||
components: [sntp]
|
||||
|
||||
button:
|
||||
- platform: restart
|
||||
name: Restart Button
|
||||
- platform: safe_mode
|
||||
name: Safe Mode Button
|
||||
- platform: shutdown
|
||||
name: Shutdown Button
|
||||
id: shutdown_btn
|
||||
- platform: copy
|
||||
source_id: shutdown_btn
|
||||
name: Shutdown Button Copy
|
||||
|
||||
touchscreen:
|
||||
- platform: ektf2232
|
||||
interrupt_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO36
|
||||
rts_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO5
|
||||
display: inkplate_display
|
||||
on_touch:
|
||||
- logger.log:
|
||||
format: Touch at (%d, %d)
|
||||
args: [touch.x, touch.y]
|
||||
|
||||
- platform: xpt2046
|
||||
id: xpt_touchscreen
|
||||
spi_id: spi_id_2
|
||||
cs_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO17
|
||||
interrupt_pin:
|
||||
number: GPIO16
|
||||
display: inkplate_display
|
||||
update_interval: 50ms
|
||||
threshold: 400
|
||||
calibration:
|
||||
x_min: 3860
|
||||
x_max: 280
|
||||
y_min: 340
|
||||
y_max: 3860
|
||||
on_touch:
|
||||
- logger.log:
|
||||
format: Touch at (%d, %d)
|
||||
args: [touch.x, touch.y]
|
||||
|
||||
- platform: lilygo_t5_47
|
||||
id: lilygo_touchscreen
|
||||
interrupt_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO36
|
||||
display: inkplate_display
|
||||
on_touch:
|
||||
- logger.log:
|
||||
format: Touch at (%d, %d)
|
||||
args: [touch.x, touch.y]
|
||||
- platform: gt911
|
||||
interrupt_pin:
|
||||
number: GPIO3
|
||||
display: inkplate_display
|
||||
|
||||
- platform: ft63x6
|
||||
id: ft63_touchscreen
|
||||
interrupt_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO39
|
||||
reset_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO5
|
||||
display: inkplate_display
|
||||
on_touch:
|
||||
- logger.log:
|
||||
format: Touch at (%d, %d)
|
||||
args: [touch.x, touch.y]
|
||||
|
||||
i2s_audio:
|
||||
i2s_lrclk_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO26
|
||||
i2s_bclk_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO27
|
||||
i2s_mclk_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO25
|
||||
|
||||
media_player:
|
||||
- platform: i2s_audio
|
||||
name: None
|
||||
dac_type: external
|
||||
i2s_dout_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO25
|
||||
mute_pin:
|
||||
number: GPIO14
|
||||
on_state:
|
||||
- media_player.play:
|
||||
- media_player.play_media: http://localhost/media.mp3
|
||||
- media_player.play_media: !lambda 'return "http://localhost/media.mp3";'
|
||||
on_idle:
|
||||
- media_player.pause:
|
||||
on_play:
|
||||
- media_player.stop:
|
||||
on_pause:
|
||||
- media_player.toggle:
|
||||
- wait_until:
|
||||
media_player.is_idle:
|
||||
- wait_until:
|
||||
media_player.is_playing:
|
||||
- media_player.volume_up:
|
||||
- media_player.volume_down:
|
||||
- media_player.volume_set: 50%
|
||||
|
||||
prometheus:
|
||||
include_internal: true
|
||||
relabel:
|
||||
ha_hello_world:
|
||||
id: hellow_world
|
||||
name: Hello World
|
||||
|
||||
microphone:
|
||||
- platform: i2s_audio
|
||||
id: mic_id_adc
|
||||
adc_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO35
|
||||
adc_type: internal
|
||||
|
||||
- platform: i2s_audio
|
||||
id: mic_id_external
|
||||
i2s_din_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO23
|
||||
adc_type: external
|
||||
pdm: false
|
||||
|
||||
speaker:
|
||||
- platform: i2s_audio
|
||||
id: speaker_id
|
||||
dac_type: external
|
||||
i2s_dout_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO25
|
||||
mode: mono
|
||||
|
||||
voice_assistant:
|
||||
microphone: mic_id_external
|
||||
speaker: speaker_id
|
||||
on_listening:
|
||||
- logger.log: "Voice assistant microphone listening"
|
||||
on_start:
|
||||
- logger.log: "Voice assistant started"
|
||||
on_stt_end:
|
||||
- logger.log:
|
||||
format: "Voice assistant STT ended with result %s"
|
||||
args: [x.c_str()]
|
||||
on_tts_start:
|
||||
- logger.log:
|
||||
format: "Voice assistant TTS started with text %s"
|
||||
args: [x.c_str()]
|
||||
on_tts_end:
|
||||
- logger.log:
|
||||
format: "Voice assistant TTS ended with url %s"
|
||||
args: [x.c_str()]
|
||||
on_end:
|
||||
- logger.log: "Voice assistant ended"
|
||||
on_error:
|
||||
- logger.log:
|
||||
format: "Voice assistant error - code %s, message: %s"
|
||||
args: [code.c_str(), message.c_str()]
|
||||
|
||||
max6956:
|
||||
- id: max6956_1
|
||||
address: 0x40
|
||||
|
||||
xl9535:
|
||||
- id: xl9535_hub
|
||||
address: 0x20
|
||||
747
tests/test5.yaml
747
tests/test5.yaml
|
|
@ -1,747 +0,0 @@
|
|||
---
|
||||
esphome:
|
||||
name: test5
|
||||
build_path: build/test5
|
||||
project:
|
||||
name: esphome.test5_project
|
||||
version: "1.0.0"
|
||||
|
||||
esp32:
|
||||
board: nodemcu-32s
|
||||
framework:
|
||||
type: esp-idf
|
||||
advanced:
|
||||
ignore_efuse_mac_crc: true
|
||||
|
||||
wifi:
|
||||
networks:
|
||||
- ssid: "MySSID"
|
||||
password: "password1"
|
||||
manual_ip:
|
||||
static_ip: 192.168.1.23
|
||||
gateway: 192.168.1.1
|
||||
subnet: 255.255.255.0
|
||||
|
||||
network:
|
||||
enable_ipv6: true
|
||||
|
||||
api:
|
||||
|
||||
ota:
|
||||
- platform: esphome
|
||||
|
||||
logger:
|
||||
|
||||
debug:
|
||||
|
||||
psram:
|
||||
|
||||
uart:
|
||||
- id: uart_1
|
||||
tx_pin: 1
|
||||
rx_pin: 3
|
||||
baud_rate: 9600
|
||||
- id: uart_2
|
||||
tx_pin:
|
||||
allow_other_uses: true
|
||||
number: 17
|
||||
inverted: true
|
||||
rx_pin:
|
||||
allow_other_uses: true
|
||||
number: 16
|
||||
baud_rate: 19200
|
||||
|
||||
i2c:
|
||||
sda:
|
||||
allow_other_uses: true
|
||||
number: 21
|
||||
scl:
|
||||
number: 22
|
||||
frequency: 100khz
|
||||
|
||||
modbus:
|
||||
uart_id: uart_1
|
||||
flow_control_pin:
|
||||
allow_other_uses: true
|
||||
number: 5
|
||||
id: mod_bus1
|
||||
|
||||
modbus_controller:
|
||||
- id: modbus_controller_test
|
||||
address: 0x2
|
||||
modbus_id: mod_bus1
|
||||
|
||||
mqtt:
|
||||
broker: test.mosquitto.org
|
||||
port: 1883
|
||||
discovery: true
|
||||
discovery_prefix: homeassistant
|
||||
idf_send_async: false
|
||||
log_topic:
|
||||
on_message:
|
||||
topic: testing/sensor/testing_sensor/state
|
||||
qos: 0
|
||||
then:
|
||||
# yamllint disable rule:line-length
|
||||
- lambda: |-
|
||||
ESP_LOGD("Mqtt Test", "testing/sensor/testing_sensor/state=[%s]", x.c_str());
|
||||
# yamllint enable rule:line-length
|
||||
|
||||
vbus:
|
||||
- uart_id: uart_2
|
||||
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin: GPIO0
|
||||
id: io0_button
|
||||
icon: mdi:gesture-tap-button
|
||||
|
||||
- platform: modbus_controller
|
||||
modbus_controller_id: modbus_controller_test
|
||||
id: modbus_binsensortest
|
||||
register_type: read
|
||||
address: 0x3200
|
||||
bitmask: 0x80 # (bit 8)
|
||||
lambda: "return x;"
|
||||
|
||||
- platform: tm1638
|
||||
id: Button0
|
||||
key: 0
|
||||
filters:
|
||||
- delayed_on: 10ms
|
||||
on_press:
|
||||
then:
|
||||
- switch.turn_on: Led0
|
||||
on_release:
|
||||
then:
|
||||
- switch.turn_off: Led0
|
||||
|
||||
- platform: tm1638
|
||||
id: Button1
|
||||
key: 1
|
||||
on_press:
|
||||
then:
|
||||
- switch.turn_on: Led1
|
||||
on_release:
|
||||
then:
|
||||
- switch.turn_off: Led1
|
||||
|
||||
- platform: tm1638
|
||||
id: Button2
|
||||
key: 2
|
||||
on_press:
|
||||
then:
|
||||
- switch.turn_on: Led2
|
||||
on_release:
|
||||
then:
|
||||
- switch.turn_off: Led2
|
||||
|
||||
- platform: tm1638
|
||||
id: Button3
|
||||
key: 3
|
||||
on_press:
|
||||
then:
|
||||
- switch.turn_on: Led3
|
||||
on_release:
|
||||
then:
|
||||
- switch.turn_off: Led3
|
||||
|
||||
- platform: tm1638
|
||||
id: Button4
|
||||
key: 4
|
||||
on_press:
|
||||
then:
|
||||
- output.turn_on: Led4
|
||||
on_release:
|
||||
then:
|
||||
- output.turn_off: Led4
|
||||
|
||||
- platform: tm1638
|
||||
id: Button5
|
||||
key: 5
|
||||
on_press:
|
||||
then:
|
||||
- output.turn_on: Led5
|
||||
on_release:
|
||||
then:
|
||||
- output.turn_off: Led5
|
||||
|
||||
- platform: tm1638
|
||||
id: Button6
|
||||
key: 6
|
||||
on_press:
|
||||
then:
|
||||
- output.turn_on: Led6
|
||||
on_release:
|
||||
then:
|
||||
- output.turn_off: Led6
|
||||
|
||||
- platform: tm1638
|
||||
id: Button7
|
||||
key: 7
|
||||
on_press:
|
||||
then:
|
||||
- output.turn_on: Led7
|
||||
on_release:
|
||||
then:
|
||||
- output.turn_off: Led7
|
||||
|
||||
- platform: gpio
|
||||
id: sn74hc165_pin_0
|
||||
pin:
|
||||
sn74hc165: sn74hc165_hub
|
||||
number: 0
|
||||
|
||||
- platform: ezo_pmp
|
||||
pump_state:
|
||||
name: "Pump State"
|
||||
is_paused:
|
||||
name: "Is Paused"
|
||||
|
||||
- platform: matrix_keypad
|
||||
keypad_id: keypad
|
||||
id: key4
|
||||
row: 1
|
||||
col: 1
|
||||
- platform: matrix_keypad
|
||||
id: key1
|
||||
key: 1
|
||||
|
||||
- platform: vbus
|
||||
model: deltasol_bs_plus
|
||||
relay2:
|
||||
name: Relay 2 On
|
||||
sensor1_error:
|
||||
name: Sensor 1 Error
|
||||
|
||||
- platform: vbus
|
||||
model: custom
|
||||
command: 0x100
|
||||
source: 0x1234
|
||||
dest: 0x10
|
||||
binary_sensors:
|
||||
- id: vcustom_b
|
||||
name: VBus Custom Binary Sensor
|
||||
lambda: return x[0] & 1;
|
||||
|
||||
tlc5947:
|
||||
data_pin:
|
||||
number: GPIO12
|
||||
allow_other_uses: true
|
||||
clock_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO14
|
||||
lat_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO15
|
||||
|
||||
gp8403:
|
||||
- id: gp8403_5v
|
||||
voltage: 5V
|
||||
- id: gp8403_10v
|
||||
voltage: 10V
|
||||
|
||||
output:
|
||||
- platform: gpio
|
||||
pin: GPIO2
|
||||
id: built_in_led
|
||||
|
||||
- platform: tlc5947
|
||||
id: output_red
|
||||
channel: 0
|
||||
max_power: 0.8
|
||||
|
||||
- platform: mcp47a1
|
||||
id: output_mcp47a1
|
||||
|
||||
- platform: modbus_controller
|
||||
modbus_controller_id: modbus_controller_test
|
||||
id: modbus_output_test
|
||||
lambda: |-
|
||||
return x * 1.0 ;
|
||||
address: 0x9001
|
||||
value_type: U_WORD
|
||||
|
||||
- platform: tm1638
|
||||
id: Led4
|
||||
led: 4
|
||||
|
||||
- platform: tm1638
|
||||
id: Led5
|
||||
led: 5
|
||||
|
||||
- platform: tm1638
|
||||
id: Led6
|
||||
led: 6
|
||||
|
||||
- platform: tm1638
|
||||
id: Led7
|
||||
led: 7
|
||||
|
||||
- platform: gp8403
|
||||
id: gp8403_output_0
|
||||
gp8403_id: gp8403_5v
|
||||
channel: 0
|
||||
- platform: gp8403
|
||||
gp8403_id: gp8403_10v
|
||||
id: gp8403_output_1
|
||||
channel: 1
|
||||
|
||||
demo:
|
||||
|
||||
esp32_ble:
|
||||
|
||||
esp32_ble_server:
|
||||
manufacturer: ESPHome
|
||||
model: Test5
|
||||
|
||||
esp32_improv:
|
||||
authorizer: io0_button
|
||||
authorized_duration: 1min
|
||||
status_indicator: built_in_led
|
||||
|
||||
ezo_pmp:
|
||||
id: hcl_pump
|
||||
update_interval: 1s
|
||||
|
||||
number:
|
||||
- platform: template
|
||||
name: My template number
|
||||
id: template_number_id
|
||||
optimistic: true
|
||||
max_value: 100
|
||||
min_value: 0
|
||||
step: 5
|
||||
unit_of_measurement: "%"
|
||||
mode: slider
|
||||
device_class: humidity
|
||||
on_value:
|
||||
- logger.log:
|
||||
format: Number changed to %f
|
||||
args: [x]
|
||||
set_action:
|
||||
- logger.log:
|
||||
format: Template Number set to %f
|
||||
args: [x]
|
||||
- number.set:
|
||||
id: template_number_id
|
||||
value: 50
|
||||
- number.to_min: template_number_id
|
||||
- number.to_min:
|
||||
id: template_number_id
|
||||
- number.to_max: template_number_id
|
||||
- number.to_max:
|
||||
id: template_number_id
|
||||
- number.increment: template_number_id
|
||||
- number.increment:
|
||||
id: template_number_id
|
||||
cycle: false
|
||||
- number.decrement: template_number_id
|
||||
- number.decrement:
|
||||
id: template_number_id
|
||||
cycle: false
|
||||
- number.operation:
|
||||
id: template_number_id
|
||||
operation: Increment
|
||||
cycle: false
|
||||
- number.operation:
|
||||
id: template_number_id
|
||||
operation: !lambda "return NUMBER_OP_INCREMENT;"
|
||||
cycle: !lambda "return false;"
|
||||
|
||||
- id: modbus_numbertest
|
||||
platform: modbus_controller
|
||||
modbus_controller_id: modbus_controller_test
|
||||
name: ModbusNumber
|
||||
address: 0x9002
|
||||
value_type: U_WORD
|
||||
lambda: "return x * 1.0;"
|
||||
write_lambda: |-
|
||||
return x * 1.0 ;
|
||||
multiply: 1.0
|
||||
|
||||
select:
|
||||
- platform: template
|
||||
name: My template select
|
||||
id: template_select_id
|
||||
optimistic: true
|
||||
initial_option: two
|
||||
restore_value: true
|
||||
on_value:
|
||||
- logger.log:
|
||||
format: Select changed to %s (index %d)"
|
||||
args: ["x.c_str()", "i"]
|
||||
set_action:
|
||||
- logger.log:
|
||||
format: Template Select set to %s
|
||||
args: ["x.c_str()"]
|
||||
- select.set:
|
||||
id: template_select_id
|
||||
option: two
|
||||
- select.first: template_select_id
|
||||
- select.last:
|
||||
id: template_select_id
|
||||
- select.previous: template_select_id
|
||||
- select.next:
|
||||
id: template_select_id
|
||||
cycle: false
|
||||
- select.operation:
|
||||
id: template_select_id
|
||||
operation: Previous
|
||||
cycle: false
|
||||
- select.operation:
|
||||
id: template_select_id
|
||||
operation: !lambda "return SELECT_OP_PREVIOUS;"
|
||||
cycle: !lambda "return true;"
|
||||
- select.set_index:
|
||||
id: template_select_id
|
||||
index: 1
|
||||
- select.set_index:
|
||||
id: template_select_id
|
||||
index: !lambda "return 1 + 1;"
|
||||
options:
|
||||
- one
|
||||
- two
|
||||
- three
|
||||
|
||||
- platform: modbus_controller
|
||||
name: Modbus Select Register 1000
|
||||
address: 1000
|
||||
value_type: U_WORD
|
||||
optionsmap:
|
||||
"Zero": 0
|
||||
"One": 1
|
||||
"Two": 2
|
||||
"Three": 3
|
||||
|
||||
sensor:
|
||||
- platform: adc
|
||||
id: adc_sensor_p32
|
||||
name: ADC pin 32
|
||||
pin: 32
|
||||
attenuation: 11db
|
||||
update_interval: 1s
|
||||
- platform: internal_temperature
|
||||
name: Internal Temperature
|
||||
state_topic:
|
||||
- platform: selec_meter
|
||||
total_active_energy:
|
||||
name: SelecEM2M Total Active Energy
|
||||
import_active_energy:
|
||||
name: SelecEM2M Import Active Energy
|
||||
export_active_energy:
|
||||
name: SelecEM2M Export Active Energy
|
||||
total_reactive_energy:
|
||||
name: SelecEM2M Total Reactive Energy
|
||||
import_reactive_energy:
|
||||
name: SelecEM2M Import Reactive Energy
|
||||
export_reactive_energy:
|
||||
name: SelecEM2M Export Reactive Energy
|
||||
apparent_energy:
|
||||
name: SelecEM2M Apparent Energy
|
||||
active_power:
|
||||
name: SelecEM2M Active Power
|
||||
reactive_power:
|
||||
name: SelecEM2M Reactive Power
|
||||
apparent_power:
|
||||
name: SelecEM2M Apparent Power
|
||||
voltage:
|
||||
name: SelecEM2M Voltage
|
||||
current:
|
||||
name: SelecEM2M Current
|
||||
power_factor:
|
||||
name: SelecEM2M Power Factor
|
||||
frequency:
|
||||
name: SelecEM2M Frequency
|
||||
maximum_demand_active_power:
|
||||
name: SelecEM2M Maximum Demand Active Power
|
||||
disabled_by_default: true
|
||||
maximum_demand_reactive_power:
|
||||
name: SelecEM2M Maximum Demand Reactive Power
|
||||
disabled_by_default: true
|
||||
maximum_demand_apparent_power:
|
||||
name: SelecEM2M Maximum Demand Apparent Power
|
||||
disabled_by_default: true
|
||||
|
||||
- id: modbus_sensortest
|
||||
platform: modbus_controller
|
||||
modbus_controller_id: modbus_controller_test
|
||||
address: 0x331A
|
||||
register_type: read
|
||||
value_type: U_WORD
|
||||
|
||||
- platform: t6615
|
||||
uart_id: uart_2
|
||||
co2:
|
||||
name: CO2 Sensor
|
||||
|
||||
- platform: ms8607
|
||||
temperature:
|
||||
name: Temperature
|
||||
humidity:
|
||||
name: Humidity
|
||||
pressure:
|
||||
name: Pressure
|
||||
- platform: ms8607
|
||||
id: ms8607_more_config
|
||||
temperature:
|
||||
name: Indoor Temperature
|
||||
accuracy_decimals: 1
|
||||
pressure:
|
||||
name: Indoor Pressure
|
||||
internal: true
|
||||
humidity:
|
||||
name: Indoor Humidity
|
||||
address: 0x41
|
||||
i2c_id:
|
||||
i2c_id:
|
||||
address: 0x77
|
||||
update_interval: 10min
|
||||
|
||||
- platform: sen5x
|
||||
id: sen54
|
||||
temperature:
|
||||
name: Temperature
|
||||
accuracy_decimals: 1
|
||||
humidity:
|
||||
name: Humidity
|
||||
accuracy_decimals: 0
|
||||
pm_1_0:
|
||||
name: PM <1µm Weight concentration
|
||||
id: pm_1_0
|
||||
accuracy_decimals: 1
|
||||
pm_2_5:
|
||||
name: PM <2.5µm Weight concentration
|
||||
id: pm_2_5
|
||||
accuracy_decimals: 1
|
||||
pm_4_0:
|
||||
name: PM <4µm Weight concentration
|
||||
id: pm_4_0
|
||||
accuracy_decimals: 1
|
||||
pm_10_0:
|
||||
name: PM <10µm Weight concentration
|
||||
id: pm_10_0
|
||||
accuracy_decimals: 1
|
||||
nox:
|
||||
name: NOx
|
||||
voc:
|
||||
name: VOC
|
||||
algorithm_tuning:
|
||||
index_offset: 100
|
||||
learning_time_offset_hours: 12
|
||||
learning_time_gain_hours: 12
|
||||
gating_max_duration_minutes: 180
|
||||
std_initial: 50
|
||||
gain_factor: 230
|
||||
temperature_compensation:
|
||||
offset: 0
|
||||
normalized_offset_slope: 0
|
||||
time_constant: 0
|
||||
auto_cleaning_interval: 604800s
|
||||
acceleration_mode: low
|
||||
store_baseline: true
|
||||
address: 0x69
|
||||
- platform: mcp9600
|
||||
thermocouple_type: K
|
||||
hot_junction:
|
||||
name: Thermocouple Temperature
|
||||
cold_junction:
|
||||
name: Ambient Temperature
|
||||
|
||||
- platform: ezo_pmp
|
||||
current_volume_dosed:
|
||||
name: Current Volume Dosed
|
||||
total_volume_dosed:
|
||||
name: Total Volume Dosed
|
||||
absolute_total_volume_dosed:
|
||||
name: Absolute Total Volume Dosed
|
||||
pump_voltage:
|
||||
name: Pump Voltage
|
||||
last_volume_requested:
|
||||
name: Last Volume Requested
|
||||
max_flow_rate:
|
||||
name: Max Flow Rate
|
||||
|
||||
- platform: vbus
|
||||
model: deltasol c
|
||||
temperature_3:
|
||||
name: Temperature 3
|
||||
operating_hours_1:
|
||||
name: Operating Hours 1
|
||||
heat_quantity:
|
||||
name: Heat Quantity
|
||||
time:
|
||||
name: System Time
|
||||
|
||||
- platform: debug
|
||||
free:
|
||||
name: "Heap Free"
|
||||
block:
|
||||
name: "Heap Max Block"
|
||||
loop_time:
|
||||
name: "Loop Time"
|
||||
psram:
|
||||
name: "PSRAM Free"
|
||||
|
||||
- platform: vbus
|
||||
model: custom
|
||||
command: 0x100
|
||||
source: 0x1234
|
||||
dest: 0x10
|
||||
sensors:
|
||||
- id: vcustom
|
||||
name: VBus Custom Sensor
|
||||
lambda: return x[0] / 10.0;
|
||||
|
||||
- platform: kuntze
|
||||
ph:
|
||||
name: Kuntze pH
|
||||
temperature:
|
||||
name: Kuntze temperature
|
||||
|
||||
script:
|
||||
- id: automation_test
|
||||
then:
|
||||
- repeat:
|
||||
count: 5
|
||||
then:
|
||||
- logger.log: looping!
|
||||
|
||||
- id: zero_repeat_test
|
||||
then:
|
||||
- repeat:
|
||||
count: !lambda "return 0;"
|
||||
then:
|
||||
- logger.log: shouldn't see mee!
|
||||
|
||||
switch:
|
||||
- platform: modbus_controller
|
||||
modbus_controller_id: modbus_controller_test
|
||||
id: modbus_switch_test
|
||||
register_type: coil
|
||||
address: 2
|
||||
bitmask: 1
|
||||
|
||||
- platform: tm1638
|
||||
id: Led0
|
||||
led: 0
|
||||
name: TM1638Led0
|
||||
|
||||
- platform: tm1638
|
||||
id: Led1
|
||||
led: 1
|
||||
name: TM1638Led1
|
||||
|
||||
- platform: tm1638
|
||||
id: Led2
|
||||
led: 2
|
||||
name: TM1638Led2
|
||||
|
||||
- platform: tm1638
|
||||
id: Led3
|
||||
led: 3
|
||||
name: TM1638Led3
|
||||
|
||||
display:
|
||||
- platform: tm1638
|
||||
id: primarydisplay
|
||||
stb_pin:
|
||||
allow_other_uses: true
|
||||
number: 5 # TM1638 STB
|
||||
clk_pin: 18 # TM1638 CLK
|
||||
dio_pin: 23 # TM1638 DIO
|
||||
update_interval: 5s
|
||||
intensity: 5
|
||||
lambda: |-
|
||||
it.print("81818181");
|
||||
|
||||
time:
|
||||
- platform: pcf85063
|
||||
- platform: pcf8563
|
||||
|
||||
text_sensor:
|
||||
- platform: ezo_pmp
|
||||
dosing_mode:
|
||||
name: Dosing Mode
|
||||
calibration_status:
|
||||
name: Calibration Status
|
||||
on_value:
|
||||
- ezo_pmp.dose_volume:
|
||||
id: hcl_pump
|
||||
volume: 10
|
||||
- ezo_pmp.dose_volume_over_time:
|
||||
id: hcl_pump
|
||||
volume: 10
|
||||
duration: 2
|
||||
- ezo_pmp.dose_with_constant_flow_rate:
|
||||
id: hcl_pump
|
||||
volume_per_minute: 10
|
||||
duration: 2
|
||||
- ezo_pmp.set_calibration_volume:
|
||||
id: hcl_pump
|
||||
volume: 10
|
||||
- ezo_pmp.find: hcl_pump
|
||||
- ezo_pmp.dose_continuously: hcl_pump
|
||||
- ezo_pmp.clear_total_volume_dosed: hcl_pump
|
||||
- ezo_pmp.clear_calibration: hcl_pump
|
||||
- ezo_pmp.pause_dosing: hcl_pump
|
||||
- ezo_pmp.stop_dosing: hcl_pump
|
||||
- ezo_pmp.arbitrary_command:
|
||||
id: hcl_pump
|
||||
command: D,?
|
||||
|
||||
sn74hc165:
|
||||
id: sn74hc165_hub
|
||||
data_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO12
|
||||
clock_pin:
|
||||
allow_other_uses: true
|
||||
number: GPIO14
|
||||
load_pin: GPIO27
|
||||
clock_inhibit_pin: GPIO26
|
||||
sr_count: 4
|
||||
|
||||
matrix_keypad:
|
||||
id: keypad
|
||||
rows:
|
||||
- pin:
|
||||
allow_other_uses: true
|
||||
number: 21
|
||||
- pin: 19
|
||||
columns:
|
||||
- pin:
|
||||
allow_other_uses: true
|
||||
number: 17
|
||||
- pin:
|
||||
allow_other_uses: true
|
||||
number: 16
|
||||
keys: "1234"
|
||||
has_pulldowns: true
|
||||
|
||||
key_collector:
|
||||
- id: reader
|
||||
source_id: keypad
|
||||
min_length: 4
|
||||
max_length: 4
|
||||
|
||||
light:
|
||||
- platform: esp32_rmt_led_strip
|
||||
id: led_strip
|
||||
pin: 13
|
||||
num_leds: 60
|
||||
rmt_channel: 6
|
||||
rgb_order: GRB
|
||||
chipset: ws2812
|
||||
- platform: esp32_rmt_led_strip
|
||||
id: led_strip2
|
||||
pin:
|
||||
allow_other_uses: true
|
||||
number: 15
|
||||
num_leds: 60
|
||||
rmt_channel: 2
|
||||
rgb_order: RGB
|
||||
bit0_high: 100us
|
||||
bit0_low: 100us
|
||||
bit1_high: 100us
|
||||
bit1_low: 100us
|
||||
|
|
@ -1,77 +0,0 @@
|
|||
---
|
||||
esphome:
|
||||
name: test6
|
||||
project:
|
||||
name: esphome.test6_project
|
||||
version: "1.0.0"
|
||||
|
||||
rp2040:
|
||||
board: rpipicow
|
||||
framework:
|
||||
# Waiting for https://github.com/platformio/platform-raspberrypi/pull/36
|
||||
platform_version: https://github.com/maxgerhardt/platform-raspberrypi.git
|
||||
|
||||
wifi:
|
||||
networks:
|
||||
- ssid: "MySSID"
|
||||
password: "password1"
|
||||
|
||||
network:
|
||||
enable_ipv6: true
|
||||
|
||||
api:
|
||||
|
||||
ota:
|
||||
- platform: esphome
|
||||
|
||||
logger:
|
||||
|
||||
debug:
|
||||
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin: GPIO5
|
||||
id: pin_5_button
|
||||
|
||||
output:
|
||||
- platform: gpio
|
||||
pin: GPIO4
|
||||
id: pin_4
|
||||
|
||||
switch:
|
||||
- platform: output
|
||||
output: pin_4
|
||||
id: pin_4_switch
|
||||
|
||||
spi: # Pins are for SPI1 on the RP2040 Pico-W
|
||||
miso_pin: 8
|
||||
clk_pin: 10
|
||||
mosi_pin: 11
|
||||
id: spi_0
|
||||
interface: hardware
|
||||
|
||||
# light:
|
||||
# - platform: rp2040_pio_led_strip
|
||||
# id: led_strip
|
||||
# pin: GPIO13
|
||||
# num_leds: 60
|
||||
# pio: 0
|
||||
# rgb_order: GRB
|
||||
# chipset: WS2812
|
||||
# - platform: rp2040_pio_led_strip
|
||||
# id: led_strip_custom_timings
|
||||
# pin: GPIO13
|
||||
# num_leds: 60
|
||||
# pio: 1
|
||||
# rgb_order: GRB
|
||||
# bit0_high: .1us
|
||||
# bit0_low: 1.2us
|
||||
# bit1_high: .69us
|
||||
# bit1_low: .4us
|
||||
|
||||
sensor:
|
||||
- platform: internal_temperature
|
||||
name: Internal Temperature
|
||||
- platform: adc
|
||||
pin: VCC
|
||||
name: VSYS
|
||||
|
|
@ -1,27 +0,0 @@
|
|||
# Tests for ESP32-C3 boards which use toolchain-riscv32-esp
|
||||
---
|
||||
wifi:
|
||||
ssid: "ssid"
|
||||
|
||||
network:
|
||||
enable_ipv6: true
|
||||
|
||||
esp32:
|
||||
board: lolin_c3_mini
|
||||
framework:
|
||||
type: arduino
|
||||
|
||||
esphome:
|
||||
name: test7
|
||||
|
||||
logger:
|
||||
|
||||
debug:
|
||||
|
||||
sensor:
|
||||
- platform: adc
|
||||
id: adc_sensor_p4
|
||||
name: ADC pin 4
|
||||
pin: 4
|
||||
attenuation: 11db
|
||||
update_interval: 1s
|
||||
|
|
@ -1,78 +0,0 @@
|
|||
# Tests for ESP32-S3 boards - IDf
|
||||
---
|
||||
wifi:
|
||||
ssid: "ssid"
|
||||
|
||||
network:
|
||||
enable_ipv6: true
|
||||
|
||||
esp32:
|
||||
board: esp32s3box
|
||||
variant: ESP32S3
|
||||
framework:
|
||||
type: esp-idf
|
||||
|
||||
esphome:
|
||||
name: esp32-s3-test
|
||||
|
||||
logger:
|
||||
|
||||
debug:
|
||||
|
||||
psram:
|
||||
|
||||
spi:
|
||||
- id: spi_id_1
|
||||
type: single
|
||||
clk_pin:
|
||||
number: GPIO7
|
||||
allow_other_uses: false
|
||||
mosi_pin: GPIO6
|
||||
interface: hardware
|
||||
spi_device:
|
||||
id: spidev
|
||||
data_rate: 2MHz
|
||||
spi_id: spi_id_1
|
||||
mode: 3
|
||||
bit_order: lsb_first
|
||||
|
||||
display:
|
||||
- platform: ili9xxx
|
||||
id: displ8
|
||||
model: ili9342
|
||||
cs_pin: GPIO5
|
||||
dc_pin: GPIO4
|
||||
reset_pin:
|
||||
number: GPIO48
|
||||
allow_other_uses: true
|
||||
|
||||
i2c:
|
||||
scl: GPIO18
|
||||
sda: GPIO8
|
||||
|
||||
touchscreen:
|
||||
- platform: tt21100
|
||||
display: displ8
|
||||
interrupt_pin:
|
||||
number: GPIO3
|
||||
ignore_strapping_warning: true
|
||||
allow_other_uses: false
|
||||
reset_pin:
|
||||
number: GPIO48
|
||||
allow_other_uses: true
|
||||
|
||||
binary_sensor:
|
||||
- platform: tt21100
|
||||
name: Home Button
|
||||
index: 1
|
||||
|
||||
sensor:
|
||||
- platform: debug
|
||||
free:
|
||||
name: "Heap Free"
|
||||
block:
|
||||
name: "Max Block Free"
|
||||
loop_time:
|
||||
name: "Loop Time"
|
||||
psram:
|
||||
name: "PSRAM Free"
|
||||
|
|
@ -1,75 +0,0 @@
|
|||
# Tests for ESP32-C3 boards - IDf
|
||||
---
|
||||
wifi:
|
||||
ssid: "ssid"
|
||||
|
||||
network:
|
||||
enable_ipv6: true
|
||||
|
||||
esp32:
|
||||
board: lolin_c3_mini
|
||||
variant: ESP32C3
|
||||
framework:
|
||||
type: esp-idf
|
||||
|
||||
esphome:
|
||||
name: esp32-c3-test
|
||||
|
||||
logger:
|
||||
|
||||
debug:
|
||||
|
||||
psram:
|
||||
|
||||
spi:
|
||||
- id: spi_id_1
|
||||
clk_pin:
|
||||
number: GPIO7
|
||||
allow_other_uses: false
|
||||
mosi_pin: GPIO6
|
||||
interface: any
|
||||
|
||||
spi_device:
|
||||
id: spidev
|
||||
data_rate: 2MHz
|
||||
spi_id: spi_id_1
|
||||
mode: 3
|
||||
bit_order: lsb_first
|
||||
|
||||
display:
|
||||
- platform: ili9xxx
|
||||
id: displ8
|
||||
model: ili9342
|
||||
cs_pin: GPIO5
|
||||
dc_pin: GPIO4
|
||||
reset_pin:
|
||||
number: GPIO21
|
||||
|
||||
i2c:
|
||||
scl: GPIO18
|
||||
sda: GPIO8
|
||||
|
||||
touchscreen:
|
||||
- platform: tt21100
|
||||
display: displ8
|
||||
interrupt_pin:
|
||||
number: GPIO3
|
||||
allow_other_uses: false
|
||||
reset_pin:
|
||||
number: GPIO20
|
||||
|
||||
binary_sensor:
|
||||
- platform: tt21100
|
||||
name: Home Button
|
||||
index: 1
|
||||
|
||||
sensor:
|
||||
- platform: debug
|
||||
free:
|
||||
name: "Heap Free"
|
||||
block:
|
||||
name: "Max Block Free"
|
||||
loop_time:
|
||||
name: "Loop Time"
|
||||
psram:
|
||||
name: "PSRAM Free"
|
||||
125
tests/test8.yaml
125
tests/test8.yaml
|
|
@ -1,125 +0,0 @@
|
|||
# Tests for ESP32-S3 boards
|
||||
---
|
||||
wifi:
|
||||
ssid: "ssid"
|
||||
|
||||
network:
|
||||
enable_ipv6: true
|
||||
|
||||
esp32:
|
||||
board: esp32s3box
|
||||
variant: ESP32S3
|
||||
framework:
|
||||
type: arduino
|
||||
|
||||
esphome:
|
||||
name: esp32-s3-test
|
||||
|
||||
logger:
|
||||
|
||||
debug:
|
||||
|
||||
psram:
|
||||
|
||||
light:
|
||||
- platform: neopixelbus
|
||||
type: GRB
|
||||
variant: WS2812
|
||||
pin: GPIO38
|
||||
num_leds: 1
|
||||
id: neopixel
|
||||
method: esp32_rmt
|
||||
name: neopixel-enable
|
||||
internal: false
|
||||
restore_mode: ALWAYS_OFF
|
||||
- platform: spi_led_strip
|
||||
num_leds: 4
|
||||
color_correct: [80%, 60%, 100%]
|
||||
id: rgb_led
|
||||
name: "RGB LED"
|
||||
data_rate: 8MHz
|
||||
- platform: binary
|
||||
name: "Red Info Light"
|
||||
output: board_info_ed
|
||||
entity_category: diagnostic
|
||||
restore_mode: ALWAYS_OFF
|
||||
|
||||
spi:
|
||||
id: spi_id_1
|
||||
clk_pin: GPIO7
|
||||
mosi_pin: GPIO6
|
||||
interface: any
|
||||
|
||||
spi_device:
|
||||
id: spidev
|
||||
data_rate: 2MHz
|
||||
spi_id: spi_id_1
|
||||
mode: 3
|
||||
bit_order: lsb_first
|
||||
|
||||
font:
|
||||
- file: "gfonts://Roboto"
|
||||
id: roboto
|
||||
size: 20
|
||||
|
||||
display:
|
||||
- platform: ili9xxx
|
||||
id: displ8
|
||||
model: ili9342
|
||||
cs_pin: GPIO5
|
||||
dc_pin: GPIO4
|
||||
reset_pin:
|
||||
number: GPIO48
|
||||
allow_other_uses: true
|
||||
lambda: |-
|
||||
it.printf(10, 100, id(roboto), Color(0x123456), COLOR_OFF, display::TextAlign::BASELINE, "%f", id(heap_free).state);
|
||||
|
||||
i2c:
|
||||
scl: GPIO18
|
||||
sda: GPIO8
|
||||
|
||||
output:
|
||||
- platform: gpio
|
||||
id: board_info_ed
|
||||
pin:
|
||||
# This pin is reserved on the ESP32S3!
|
||||
number: 26
|
||||
ignore_pin_validation_error: true
|
||||
|
||||
touchscreen:
|
||||
- platform: tt21100
|
||||
display: displ8
|
||||
interrupt_pin:
|
||||
number: GPIO3
|
||||
ignore_strapping_warning: true
|
||||
allow_other_uses: false
|
||||
reset_pin:
|
||||
number: GPIO48
|
||||
allow_other_uses: true
|
||||
|
||||
binary_sensor:
|
||||
- platform: tt21100
|
||||
name: Home Button
|
||||
index: 1
|
||||
|
||||
sensor:
|
||||
- platform: debug
|
||||
free:
|
||||
id: heap_free
|
||||
name: "Heap Free"
|
||||
block:
|
||||
name: "Max Block Free"
|
||||
loop_time:
|
||||
name: "Loop Time"
|
||||
psram:
|
||||
name: "PSRAM Free"
|
||||
|
||||
# Purposely test that `animation:` does auto-load `image:`
|
||||
# Keep the `image:` undefined.
|
||||
# image:
|
||||
|
||||
animation:
|
||||
- id: rgb565_animation
|
||||
file: pnglogo.png
|
||||
type: RGB565
|
||||
use_transparency: false
|
||||
|
|
@ -1,29 +0,0 @@
|
|||
# Tests for rtl87xx boards using LibreTiny
|
||||
---
|
||||
wifi:
|
||||
ssid: "ssid"
|
||||
|
||||
rtl87xx:
|
||||
board: generic-rtl8710bn-2mb-788k
|
||||
|
||||
esphome:
|
||||
name: rtl87xx-test
|
||||
|
||||
logger:
|
||||
|
||||
ota:
|
||||
- platform: esphome
|
||||
|
||||
captive_portal:
|
||||
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
name: Home Button
|
||||
pin: GPIO11
|
||||
|
||||
sensor:
|
||||
- platform: adc
|
||||
id: adc_sensor
|
||||
name: ADC
|
||||
pin: PA19
|
||||
update_interval: 1s
|
||||
|
|
@ -1,35 +0,0 @@
|
|||
# Tests for bk7xx boards using LibreTiny
|
||||
---
|
||||
wifi:
|
||||
ssid: "ssid"
|
||||
|
||||
bk72xx:
|
||||
board: cb2s
|
||||
|
||||
esphome:
|
||||
name: bk72xx-test
|
||||
|
||||
logger:
|
||||
|
||||
ota:
|
||||
- platform: esphome
|
||||
|
||||
captive_portal:
|
||||
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
name: Home Button
|
||||
pin: GPIO24
|
||||
|
||||
sensor:
|
||||
- platform: adc
|
||||
id: adc_sensor
|
||||
name: ADC
|
||||
pin: GPIO23
|
||||
update_interval: 1s
|
||||
|
||||
mqtt:
|
||||
broker: test.mosquitto.org
|
||||
port: 1883
|
||||
discovery: true
|
||||
discovery_prefix: homeassistant
|
||||
Loading…
Reference in a new issue