Merge pull request #2074 from esphome/bump-1.20.1

1.20.1

esphome/components/anova/anova.cpp

@@ -60,6 +60,7 @@ void Anova::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_
       auto chr = this->parent_->get_characteristic(ANOVA_SERVICE_UUID, ANOVA_CHARACTERISTIC_UUID);
       if (chr == nullptr) {
         ESP_LOGW(TAG, "[%s] No control service found at device, not an Anova..?", this->get_name().c_str());
+        ESP_LOGW(TAG, "[%s] Note, this component does not currently support Anova Nano.", this->get_name().c_str());
         break;
       }
       this->char_handle_ = chr->handle;

esphome/components/external_components/__init__.py

@@ -109,9 +109,9 @@ def _compute_destination_path(key: str) -> Path:
     return base_dir / h.hexdigest()[:8]
 
 
-def _run_git_command(cmd):
+def _run_git_command(cmd, cwd=None):
     try:
-        ret = subprocess.run(cmd, capture_output=True, check=False)
+        ret = subprocess.run(cmd, cwd=cwd, capture_output=True, check=False)
     except FileNotFoundError as err:
         raise cv.Invalid(
             "git is not installed but required for external_components.\n"
@@ -151,14 +151,16 @@ def _process_git_config(config: dict, refresh) -> str:
             _LOGGER.info("Updating %s", key)
             _LOGGER.debug("Location: %s", repo_dir)
             # Stash local changes (if any)
-            _run_git_command(["git", "stash", "push", "--include-untracked"])
+            _run_git_command(
+                ["git", "stash", "push", "--include-untracked"], str(repo_dir)
+            )
             # Fetch remote ref
             cmd = ["git", "fetch", "--", "origin"]
             if CONF_REF in config:
                 cmd.append(config[CONF_REF])
-            _run_git_command(cmd)
+            _run_git_command(cmd, str(repo_dir))
             # Hard reset to FETCH_HEAD (short-lived git ref corresponding to most recent fetch)
-            _run_git_command(["git", "reset", "--hard", "FETCH_HEAD"])
+            _run_git_command(["git", "reset", "--hard", "FETCH_HEAD"], str(repo_dir))
 
     if (repo_dir / "esphome" / "components").is_dir():
         components_dir = repo_dir / "esphome" / "components"

esphome/components/midea_ac/midea_climate.cpp

@@ -100,7 +100,7 @@ bool MideaAC::allow_preset(climate::ClimatePreset preset) const {
         ESP_LOGD(TAG, "BOOST preset is only available in HEAT or COOL mode");
       }
       break;
-    case climate::CLIMATE_PRESET_HOME:
+    case climate::CLIMATE_PRESET_NONE:
       return true;
     default:
       break;
@@ -191,7 +191,7 @@ climate::ClimateTraits MideaAC::traits() {
   if (traits_swing_both_)
     traits.add_supported_swing_mode(climate::CLIMATE_SWING_BOTH);
   traits.set_supported_presets({
-      climate::CLIMATE_PRESET_HOME,
+      climate::CLIMATE_PRESET_NONE,
   });
   if (traits_preset_eco_)
     traits.add_supported_preset(climate::CLIMATE_PRESET_ECO);

esphome/components/midea_ac/midea_frame.cpp

@@ -86,18 +86,17 @@ void PropertiesFrame::set_mode(climate::ClimateMode mode) {
 }
 
 optional<climate::ClimatePreset> PropertiesFrame::get_preset() const {
-  if (this->get_eco_mode()) {
+  if (this->get_eco_mode())
     return climate::CLIMATE_PRESET_ECO;
-  } else if (this->get_sleep_mode()) {
+  if (this->get_sleep_mode())
     return climate::CLIMATE_PRESET_SLEEP;
-  } else if (this->get_turbo_mode()) {
+  if (this->get_turbo_mode())
     return climate::CLIMATE_PRESET_BOOST;
-  } else {
+  return climate::CLIMATE_PRESET_NONE;
-    return climate::CLIMATE_PRESET_HOME;
-  }
 }
 
 void PropertiesFrame::set_preset(climate::ClimatePreset preset) {
+  this->clear_presets();
   switch (preset) {
     case climate::CLIMATE_PRESET_ECO:
       this->set_eco_mode(true);
@@ -113,14 +112,21 @@ void PropertiesFrame::set_preset(climate::ClimatePreset preset) {
   }
 }
 
+void PropertiesFrame::clear_presets() {
+  this->set_eco_mode(false);
+  this->set_sleep_mode(false);
+  this->set_turbo_mode(false);
+  this->set_freeze_protection_mode(false);
+}
+
 bool PropertiesFrame::is_custom_preset() const { return this->get_freeze_protection_mode(); }
 
 const std::string &PropertiesFrame::get_custom_preset() const { return midea_ac::MIDEA_FREEZE_PROTECTION_PRESET; };
 
 void PropertiesFrame::set_custom_preset(const std::string &preset) {
-  if (preset == MIDEA_FREEZE_PROTECTION_PRESET) {
+  this->clear_presets();
+  if (preset == MIDEA_FREEZE_PROTECTION_PRESET)
     this->set_freeze_protection_mode(true);
-  }
 }
 
 bool PropertiesFrame::is_custom_fan_mode() const {

esphome/components/midea_ac/midea_frame.h

@@ -115,6 +115,7 @@ class PropertiesFrame : public midea_dongle::BaseFrame {
   /* PRESET */
   optional<climate::ClimatePreset> get_preset() const;
   void set_preset(climate::ClimatePreset preset);
+  void clear_presets();
 
   bool is_custom_preset() const;
   const std::string &get_custom_preset() const;

esphome/components/mqtt/mqtt_climate.cpp

@@ -72,7 +72,7 @@ void MQTTClimateComponent::send_discovery(JsonObject &root, mqtt::SendDiscoveryC
     root["act_t"] = this->get_action_state_topic();
   }
 
-  if (traits.get_supports_fan_modes()) {
+  if (traits.get_supports_fan_modes() || !traits.get_supported_custom_fan_modes().empty()) {
     // fan_mode_command_topic
     root["fan_mode_cmd_t"] = this->get_fan_mode_command_topic();
     // fan_mode_state_topic

esphome/components/pid/pid_climate.cpp

@@ -35,8 +35,8 @@ void PIDClimate::control(const climate::ClimateCall &call) {
   if (call.get_target_temperature().has_value())
     this->target_temperature = *call.get_target_temperature();
 
-  // If switching to non-auto mode, set output immediately
+  // If switching to off mode, set output immediately
-  if (this->mode != climate::CLIMATE_MODE_HEAT_COOL)
+  if (this->mode == climate::CLIMATE_MODE_OFF)
     this->handle_non_auto_mode_();
 
   this->publish_state();

esphome/components/tuya/tuya.cpp

@@ -8,9 +8,10 @@ namespace tuya {
 
 static const char *const TAG = "tuya";
 static const int COMMAND_DELAY = 50;
+static const int RECEIVE_TIMEOUT = 300;
 
 void Tuya::setup() {
-  this->set_interval("heartbeat", 10000, [this] { this->send_empty_command_(TuyaCommandType::HEARTBEAT); });
+  this->set_interval("heartbeat", 15000, [this] { this->send_empty_command_(TuyaCommandType::HEARTBEAT); });
 }
 
 void Tuya::loop() {
@@ -117,7 +118,13 @@ void Tuya::handle_char_(uint8_t c) {
 }
 
 void Tuya::handle_command_(uint8_t command, uint8_t version, const uint8_t *buffer, size_t len) {
-  switch ((TuyaCommandType) command) {
+  TuyaCommandType command_type = (TuyaCommandType) command;
+
+  if (this->expected_response_.has_value() && this->expected_response_ == command_type) {
+    this->expected_response_.reset();
+  }
+
+  switch (command_type) {
     case TuyaCommandType::HEARTBEAT:
       ESP_LOGV(TAG, "MCU Heartbeat (0x%02X)", buffer[0]);
       this->protocol_version_ = version;
@@ -316,6 +323,25 @@ void Tuya::send_raw_command_(TuyaCommand command) {
   uint8_t version = 0;
 
   this->last_command_timestamp_ = millis();
+  switch (command.cmd) {
+    case TuyaCommandType::HEARTBEAT:
+      this->expected_response_ = TuyaCommandType::HEARTBEAT;
+      break;
+    case TuyaCommandType::PRODUCT_QUERY:
+      this->expected_response_ = TuyaCommandType::PRODUCT_QUERY;
+      break;
+    case TuyaCommandType::CONF_QUERY:
+      this->expected_response_ = TuyaCommandType::CONF_QUERY;
+      break;
+    case TuyaCommandType::DATAPOINT_DELIVER:
+      this->expected_response_ = TuyaCommandType::DATAPOINT_REPORT;
+      break;
+    case TuyaCommandType::DATAPOINT_QUERY:
+      this->expected_response_ = TuyaCommandType::DATAPOINT_REPORT;
+      break;
+    default:
+      break;
+  }
 
   ESP_LOGV(TAG, "Sending Tuya: CMD=0x%02X VERSION=%u DATA=[%s] INIT_STATE=%u", static_cast<uint8_t>(command.cmd),
            version, hexencode(command.payload).c_str(), static_cast<uint8_t>(this->init_state_));
@@ -332,8 +358,14 @@ void Tuya::send_raw_command_(TuyaCommand command) {
 
 void Tuya::process_command_queue_() {
   uint32_t delay = millis() - this->last_command_timestamp_;
+
+  if (this->expected_response_.has_value() && delay > RECEIVE_TIMEOUT) {
+    this->expected_response_.reset();
+  }
+
   // Left check of delay since last command in case theres ever a command sent by calling send_raw_command_ directly
-  if (delay > COMMAND_DELAY && !this->command_queue_.empty() && this->rx_message_.empty()) {
+  if (delay > COMMAND_DELAY && !this->command_queue_.empty() && this->rx_message_.empty() &&
+      !this->expected_response_.has_value()) {
     this->send_raw_command_(command_queue_.front());
     this->command_queue_.erase(command_queue_.begin());
   }
@@ -345,7 +377,7 @@ void Tuya::send_command_(const TuyaCommand &command) {
 }
 
 void Tuya::send_empty_command_(TuyaCommandType command) {
-  send_command_(TuyaCommand{.cmd = command, .payload = std::vector<uint8_t>{0x04}});
+  send_command_(TuyaCommand{.cmd = command, .payload = std::vector<uint8_t>{}});
 }
 
 void Tuya::send_wifi_status_() {

esphome/components/tuya/tuya.h

@@ -113,6 +113,7 @@ class Tuya : public Component, public uart::UARTDevice {
   std::vector<uint8_t> rx_message_;
   std::vector<uint8_t> ignore_mcu_update_on_datapoints_{};
   std::vector<TuyaCommand> command_queue_;
+  optional<TuyaCommandType> expected_response_{};
   uint8_t wifi_status_ = -1;
 };
 

esphome/const.py

@@ -1,6 +1,6 @@
 """Constants used by esphome."""
 
-__version__ = "1.20.0"
+__version__ = "1.20.1"
 
 ESP_PLATFORM_ESP32 = "ESP32"
 ESP_PLATFORM_ESP8266 = "ESP8266"