renamed transmit_cc1101 to transmit_rc_switch_raw_cc1101 to better reflect what it does, and begin_tx/end_tx can be used for the rest of the transmit_* actions

esphome/components/cc1101/__init__.py

@@ -1,6 +1,7 @@
 import esphome.codegen as cg
 import esphome.config_validation as cv
-from esphome import pins
+from esphome import automation, pins
+from esphome.automation import maybe_simple_id
 from esphome.components import sensor
 from esphome.components import spi
 from esphome.components import remote_base
@@ -74,6 +75,24 @@ async def to_code(config):
         cg.add(var.set_config_lqi_sensor(lqi))
 
 
+BeginTxAction = ns.class_("BeginTxAction", automation.Action)
+EndTxAction = ns.class_("EndTxAction", automation.Action)
+
+CC1101_ACTION_SCHEMA = maybe_simple_id(
+    {
+        cv.Required(CONF_ID): cv.use_id(CC1101),
+    }
+)
+
+
+@automation.register_action("cc1101.begin_tx", BeginTxAction, CC1101_ACTION_SCHEMA)
+@automation.register_action("cc1101.end_tx", EndTxAction, CC1101_ACTION_SCHEMA)
+async def cc1101_action_to_code(config, action_id, template_arg, args):
+    var = cg.new_Pvariable(action_id, template_arg)
+    await cg.register_parented(var, config[CONF_ID])
+    return var
+
+
 CC1101RawAction = ns.class_("CC1101RawAction", remote_base.RCSwitchRawAction)
 
 CC1101_TRANSMIT_SCHEMA = (
@@ -88,8 +107,8 @@ CC1101_TRANSMIT_SCHEMA = (
 )
 
 
-@remote_base.register_action("cc1101", CC1101RawAction, CC1101_TRANSMIT_SCHEMA)
+@remote_base.register_action("rc_switch_raw_cc1101", CC1101RawAction, CC1101_TRANSMIT_SCHEMA)
-async def cc1101_action(var, config, args):
+async def rc_switch_raw_cc1101_action(var, config, args):
     proto = await cg.templatable(
         config[CONF_PROTOCOL],
         args,

esphome/components/cc1101/cc1101.cpp

@@ -6,11 +6,13 @@
   It can be compiled with Arduino and esp-idf framework and should support any esphome compatible board through the SPI
   Bus.
 
-  On ESP8266, you can use a single pin instead of GD0O and GD02 (gdo0 is an optional parameter). If assigned,
+  On ESP8266, you can use a single pin instead of GD0O and GD02 (gdo0 is an optional parameter). If assigned, the pin
-  the pin direction will be reversed for the transfers.
+  direction will be reversed for the transfers.
 
-  On ESP32, this will not work, you must connect two separate pins. TX to GDO0, RX to GDO2.
+  On ESP32, this will not work, you must connect two separate pins. TX to GDO0, RX to GDO2. If only TX works, they are
-  If only TX works, they are probably switched.
+  probably switched.
+
+  Transfers, except transmit_rc_switch_raw_cc1101, must be surrounded with cc1101.begin_tx and cc1101.end_tx.
 
   The source code is a mashup of the following github projects with some special esphome sauce:
 
@@ -593,14 +595,14 @@ void CC1101::set_rxbw_(uint32_t bw) {
 }
 
 void CC1101::set_tx_() {
-  ESP_LOGI(TAG, "CC1101 set_tx");
+  ESP_LOGD(TAG, "CC1101 set_tx");
   this->send_cmd_(CC1101_SIDLE);
   this->send_cmd_(CC1101_STX);
   this->trxstate_ = 1;
 }
 
 void CC1101::set_rx_() {
-  ESP_LOGI(TAG, "CC1101 set_rx");
+  ESP_LOGD(TAG, "CC1101 set_rx");
   this->send_cmd_(CC1101_SIDLE);
   this->send_cmd_(CC1101_SRX);
   this->trxstate_ = 2;

esphome/components/cc1101/cc1101.h

@@ -90,6 +90,16 @@ class CC1101 : public PollingComponent,
   void end_tx();
 };
 
+template<typename... Ts> class BeginTxAction : public Action<Ts...>, public Parented<CC1101> {
+ public:
+  void play(Ts... x) override { this->parent_->begin_tx(); }
+};
+
+template<typename... Ts> class EndTxAction : public Action<Ts...>, public Parented<CC1101> {
+ public:
+  void play(Ts... x) override { this->parent_->end_tx(); }
+};
+
 template<typename... Ts> class CC1101RawAction : public remote_base::RCSwitchRawAction<Ts...>, public Parented<CC1101> {
  protected:
   void play(Ts... x) override {

tests/components/cc1101/test.esp32-c3-idf.yaml

@@ -51,7 +51,7 @@ button:
   - platform: template
     name: "Gate"
     on_press:
-      - remote_transmitter.transmit_cc1101:
+      - remote_transmitter.transmit_rc_switch_raw_cc1101:
           transmitter_id: realtx
           code: '0111000110010011110110010100011111110001001011110111'
           protocol:

tests/components/cc1101/test.esp32-c3.yaml

@@ -51,7 +51,7 @@ button:
   - platform: template
     name: "Gate"
     on_press:
-      - remote_transmitter.transmit_cc1101:
+      - remote_transmitter.transmit_rc_switch_raw_cc1101:
           transmitter_id: realtx
           code: '0111000110010011110110010100011111110001001011110111'
           protocol:

tests/components/cc1101/test.esp32-idf.yaml

@@ -43,7 +43,7 @@ button:
   - platform: template
     name: "Gate"
     on_press:
-      - remote_transmitter.transmit_cc1101:
+      - remote_transmitter.transmit_rc_switch_raw_cc1101:
           code: '0111000110010011110110010100011111110001001011110111'
           protocol:
             pulse_length: 434

tests/components/cc1101/test.esp32-s2-idf.yaml

@@ -43,7 +43,7 @@ button:
   - platform: template
     name: "Gate"
     on_press:
-      - remote_transmitter.transmit_cc1101:
+      - remote_transmitter.transmit_rc_switch_raw_cc1101:
           code: '0111000110010011110110010100011111110001001011110111'
           protocol:
             pulse_length: 434

tests/components/cc1101/test.esp32-s2.yaml

@@ -43,7 +43,7 @@ button:
   - platform: template
     name: "Gate"
     on_press:
-      - remote_transmitter.transmit_cc1101:
+      - remote_transmitter.transmit_rc_switch_raw_cc1101:
           code: '0111000110010011110110010100011111110001001011110111'
           protocol:
             pulse_length: 434

tests/components/cc1101/test.esp32.yaml

@@ -43,7 +43,7 @@ button:
   - platform: template
     name: "Gate"
     on_press:
-      - remote_transmitter.transmit_cc1101:
+      - remote_transmitter.transmit_rc_switch_raw_cc1101:
           code: '0111000110010011110110010100011111110001001011110111'
           protocol:
             pulse_length: 434

tests/components/cc1101/test.esp8266.yaml

@@ -50,7 +50,7 @@ button:
   - platform: template
     name: "Gate"
     on_press:
-      - remote_transmitter.transmit_cc1101:
+      - remote_transmitter.transmit_rc_switch_raw_cc1101:
           code: '0111000110010011110110010100011111110001001011110111'
           protocol:
             pulse_length: 434