Home-IoT/esphome
1
0
Fork 0
mirror of https://github.com/esphome/esphome.git synced 2024-12-04 20:48:21 +01:00
Code Issues Projects Releases Packages Wiki Activity Actions 7

Update hdc2010.cpp

Browse source
This commit is contained in:
optimusprimespace 2024-05-17 06:21:48 -04:00
parent c7f37fb069
commit f03c0c7062
1 changed files with 57 additions and 10 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

67
esphome/components/hdc2010/hdc2010.cpp
View file

@ -10,14 +10,13 @@ static const char *const TAG = "hdc2010";
static const uint8_t HDC2010_ADDRESS = 0x40; // 0b1000000 or 0b1000001 from datasheet
static const uint8_t HDC2010_CMD_CONFIGURATION_MEASUREMENT = 0x8F;
static const uint8_t HDC2010_CMD_START_MEASUREMENT = 0xF9; // new start measurement command
static const uint8_t HDC2010_CMD_START_MEASUREMENT = 0xF9;
static const uint8_t HDC2010_CMD_TEMPERATURE_LOW = 0x00;
static const uint8_t HDC2010_CMD_TEMPERATURE_HIGH = 0x01;
static const uint8_t HDC2010_CMD_HUMIDITY_LOW = 0x02;
static const uint8_t HDC2010_CMD_HUMIDITY_HIGH = 0x03;
static const uint8_t HDC2010_CMD_HEATER_HEAT0 = 0x5A;
// static const uint8_t HDC2010_TEMP_OFFSET_ADJUST = 0x08;
// static const uint8_t HDC2010_HUM_OFFSET_ADJUST = 0x09;
static const uint8_t CONFIG = 0x0E;
static const uint8_t MEASUREMENT_CONFIG = 0x0F;
void HDC2010Component::setup() {
ESP_LOGCONFIG(TAG, "Setting up HDC2010...");
@ -28,12 +27,32 @@ void HDC2010Component::setup() {
};
if (!this->write_bytes(HDC2010_CMD_CONFIGURATION_MEASUREMENT, data, 2)) {
// as instruction is same as powerup defaults (for now), interpret as warning if this fails
ESP_LOGW(TAG, "HDC2010 initial config instruction error");
this->status_set_warning();
return;
}
// Set measurement mode to temperature and humidity
setMeasurementMode(TEMP_AND_HUMID);
// Set rate to manual
uint8_t configContents = readReg(CONFIG);
configContents &= 0x8F;
writeReg(CONFIG, configContents);
// Set temperature resolution to 14bit
configContents = readReg(CONFIG);
configContents &= 0x3F;
writeReg(CONFIG, configContents);
// Set humidity resolution to 14bit
configContents = readReg(CONFIG);
configContents &= 0xCF;
writeReg(CONFIG, configContents);
delay(1000); // wait for 1 second
}
void HDC2010Component::dump_config() {
ESP_LOGCONFIG(TAG, "HDC2010:");
LOG_I2C_DEVICE(this);
@ -44,13 +63,15 @@ void HDC2010Component::dump_config() {
LOG_SENSOR(" ", "Temperature", this->temperature_);
LOG_SENSOR(" ", "Humidity", this->humidity_);
}
void HDC2010Component::update() {
uint8_t raw_data[4];
if (this->write(&HDC2010_CMD_START_MEASUREMENT, 1) != i2c::ERROR_OK) {
this->status_set_warning();
return;
}
// Trigger measurement
uint8_t configContents = readReg(CONFIG);
configContents |= 0x01;
writeReg(CONFIG, configContents);
delayMicroseconds(1000); // 1ms delay after triggering the sample
if (this->read(raw_data, 4) != i2c::ERROR_OK) {
@ -96,5 +117,31 @@ void HDC2010Component::update() {
float HDC2010Component::get_setup_priority() const { return setup_priority::DATA; }
void HDC2010Component::setMeasurementMode(int mode) {
uint8_t configContents;
configContents = readReg(MEASUREMENT_CONFIG);
switch (mode) {
case TEMP_AND_HUMID:
configContents = (configContents & 0xF9);
break;
case TEMP_ONLY:
configContents = (configContents & 0xFC);
configContents = (configContents | 0x02);
break;
case HUMID_ONLY:
configContents = (configContents & 0xFD);
configContents = (configContents | 0x04);
break;
default:
configContents = (configContents & 0xF9);
}
writeReg(MEASUREMENT_CONFIG, configContents);
}
} // namespace hdc2010
} // namespace esphome
} // namespace esphome