Merge branch 'dev' into add-cse-7766-reactive-power

CODEOWNERS

@@ -453,6 +453,7 @@ esphome/components/wl_134/* @hobbypunk90
 esphome/components/x9c/* @EtienneMD
 esphome/components/xgzp68xx/* @gcormier
 esphome/components/xiaomi_hhccjcy10/* @fariouche
+esphome/components/xiaomi_lywsd02mmc/* @juanluss31
 esphome/components/xiaomi_lywsd03mmc/* @ahpohl
 esphome/components/xiaomi_mhoc303/* @drug123
 esphome/components/xiaomi_mhoc401/* @vevsvevs

esphome/components/api/api_connection.cpp

@@ -1335,6 +1335,9 @@ void APIConnection::update_command(const UpdateCommandRequest &msg) {
     case enums::UPDATE_COMMAND_CHECK:
       update->check();
       break;
+    case enums::UPDATE_COMMAND_NONE:
+      ESP_LOGE(TAG, "UPDATE_COMMAND_NONE not handled. Check client is sending the correct command");
+      break;
     default:
       ESP_LOGW(TAG, "Unknown update command: %" PRIu32, msg.command);
       break;

esphome/components/bedjet/bedjet_codec.h

@@ -90,7 +90,7 @@ struct BedjetStatusPacket {
     int unused_6 : 1;       // 0x4
     bool is_dual_zone : 1;  /// Is part of a Dual Zone configuration
     int unused_7 : 1;       // 0x1
-  } dual_zone_flags;
+  } dual_zone_flags;        // NOLINT(clang-diagnostic-unaligned-access)
 
   uint8_t unused_4 : 8;  // Unknown 23-24 = 0x1310
   uint8_t unused_5 : 8;  // Unknown 23-24 = 0x1310

esphome/components/fingerprint_grow/fingerprint_grow.cpp

@@ -307,7 +307,7 @@ void FingerprintGrowComponent::delete_fingerprint(uint16_t finger_id) {
 
 void FingerprintGrowComponent::delete_all_fingerprints() {
   ESP_LOGI(TAG, "Deleting all stored fingerprints");
-  this->data_ = {EMPTY};
+  this->data_ = {DELETE_ALL};
   switch (this->send_command_()) {
     case OK:
       ESP_LOGI(TAG, "Deleted all fingerprints");

esphome/components/fingerprint_grow/fingerprint_grow.h

@@ -36,7 +36,7 @@ enum GrowCommand {
   LOAD = 0x07,
   UPLOAD = 0x08,
   DELETE = 0x0C,
-  EMPTY = 0x0D,
+  DELETE_ALL = 0x0D,  // aka EMPTY
   READ_SYS_PARAM = 0x0F,
   SET_PASSWORD = 0x12,
   VERIFY_PASSWORD = 0x13,

esphome/components/haier/haier_base.h

@@ -80,8 +80,8 @@ class HaierClimateBase : public esphome::Component,
   const char *phase_to_string_(ProtocolPhases phase);
   virtual void set_handlers() = 0;
   virtual void process_phase(std::chrono::steady_clock::time_point now) = 0;
-  virtual haier_protocol::HaierMessage get_control_message() = 0;
-  virtual haier_protocol::HaierMessage get_power_message(bool state) = 0;
+  virtual haier_protocol::HaierMessage get_control_message() = 0;          // NOLINT(readability-identifier-naming)
+  virtual haier_protocol::HaierMessage get_power_message(bool state) = 0;  // NOLINT(readability-identifier-naming)
   virtual void initialization(){};
   virtual bool prepare_pending_action();
   virtual void process_protocol_reset();

esphome/components/network/__init__.py

@@ -1,8 +1,6 @@
-from esphome.core import CORE
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components.esp32 import add_idf_sdkconfig_option
-
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ENABLE_IPV6,
     CONF_MIN_IPV6_ADDR_COUNT,
@@ -10,6 +8,7 @@ from esphome.const import (
     PLATFORM_ESP8266,
     PLATFORM_RP2040,
 )
+from esphome.core import CORE
 
 CODEOWNERS = ["@esphome/core"]
 AUTO_LOAD = ["mdns"]
@@ -42,11 +41,10 @@ async def to_code(config):
         if CORE.using_esp_idf:
             add_idf_sdkconfig_option("CONFIG_LWIP_IPV6", enable_ipv6)
             add_idf_sdkconfig_option("CONFIG_LWIP_IPV6_AUTOCONFIG", enable_ipv6)
-        else:
-            if enable_ipv6:
-                cg.add_build_flag("-DCONFIG_LWIP_IPV6")
-                cg.add_build_flag("-DCONFIG_LWIP_IPV6_AUTOCONFIG")
-                if CORE.is_rp2040:
-                    cg.add_build_flag("-DPIO_FRAMEWORK_ARDUINO_ENABLE_IPV6")
-                if CORE.is_esp8266:
-                    cg.add_build_flag("-DPIO_FRAMEWORK_ARDUINO_LWIP2_IPV6_LOW_MEMORY")
+        elif enable_ipv6:
+            cg.add_build_flag("-DCONFIG_LWIP_IPV6")
+            cg.add_build_flag("-DCONFIG_LWIP_IPV6_AUTOCONFIG")
+            if CORE.is_rp2040:
+                cg.add_build_flag("-DPIO_FRAMEWORK_ARDUINO_ENABLE_IPV6")
+            if CORE.is_esp8266:
+                cg.add_build_flag("-DPIO_FRAMEWORK_ARDUINO_LWIP2_IPV6_LOW_MEMORY")

esphome/components/web_server/web_server.h

@@ -334,7 +334,7 @@ class WebServer : public Controller, public Component, public AsyncWebHandler {
   /// Override the web handler's handleRequest method.
   void handleRequest(AsyncWebServerRequest *request) override;
   /// This web handle is not trivial.
-  bool isRequestHandlerTrivial() override;
+  bool isRequestHandlerTrivial() override;  // NOLINT(readability-identifier-naming)
 
   void add_entity_to_sorting_list(EntityBase *entity, float weight);
 

esphome/components/web_server_base/web_server_base.h

@@ -134,6 +134,7 @@ class OTARequestHandler : public AsyncWebHandler {
     return request->url() == "/update" && request->method() == HTTP_POST;
   }
 
+  // NOLINTNEXTLINE(readability-identifier-naming)
   bool isRequestHandlerTrivial() override { return false; }
 
  protected:

esphome/components/xiaomi_ble/xiaomi_ble.cpp

@@ -49,8 +49,8 @@ bool parse_xiaomi_value(uint16_t value_type, const uint8_t *data, uint8_t value_
     const uint16_t conductivity = encode_uint16(data[1], data[0]);
     result.conductivity = conductivity;
   }
-  // battery, 1 byte, 8-bit unsigned integer, 1 %
-  else if ((value_type == 0x100A) && (value_length == 1)) {
+  // battery / MiaoMiaoce battery, 1 byte, 8-bit unsigned integer, 1 %
+  else if ((value_type == 0x100A || value_type == 0x4803) && (value_length == 1)) {
     result.battery_level = data[0];
   }
   // temperature + humidity, 4 bytes, 16-bit signed integer (LE) each, 0.1 °C, 0.1 %
@@ -80,6 +80,17 @@ bool parse_xiaomi_value(uint16_t value_type, const uint8_t *data, uint8_t value_
     result.has_motion = !idle_time;
   } else if ((value_type == 0x1018) && (value_length == 1)) {
     result.is_light = data[0];
+  }
+  // MiaoMiaoce temperature, 4 bytes, float, 0.1 °C
+  else if ((value_type == 0x4C01) && (value_length == 4)) {
+    const uint32_t int_number = encode_uint32(data[3], data[2], data[1], data[0]);
+    float temperature;
+    std::memcpy(&temperature, &int_number, sizeof(temperature));
+    result.temperature = temperature;
+  }
+  // MiaoMiaoce humidity, 1 byte, 8-bit unsigned integer, 1 %
+  else if ((value_type == 0x4C02) && (value_length == 1)) {
+    result.humidity = data[0];
   } else {
     return false;
   }
@@ -111,7 +122,8 @@ bool parse_xiaomi_message(const std::vector<uint8_t> &message, XiaomiParseResult
   }
 
   while (payload_length > 3) {
-    if (payload[payload_offset + 1] != 0x10 && payload[payload_offset + 1] != 0x00) {
+    if (payload[payload_offset + 1] != 0x10 && payload[payload_offset + 1] != 0x00 &&
+        payload[payload_offset + 1] != 0x4C && payload[payload_offset + 1] != 0x48) {
       ESP_LOGVV(TAG, "parse_xiaomi_message(): fixed byte not found, stop parsing residual data.");
       break;
     }
@@ -190,6 +202,11 @@ optional<XiaomiParseResult> parse_xiaomi_header(const esp32_ble_tracker::Service
   } else if (device_uuid == 0x045b) {  // rectangular body, e-ink display
     result.type = XiaomiParseResult::TYPE_LYWSD02;
     result.name = "LYWSD02";
+  } else if (device_uuid == 0x2542) {  // rectangular body, e-ink display — with bindkeys
+    result.type = XiaomiParseResult::TYPE_LYWSD02MMC;
+    result.name = "LYWSD02MMC";
+    if (raw.size() == 19)
+      result.raw_offset -= 6;
   } else if (device_uuid == 0x040a) {  // Mosquito Repellent Smart Version
     result.type = XiaomiParseResult::TYPE_WX08ZM;
     result.name = "WX08ZM";

esphome/components/xiaomi_ble/xiaomi_ble.h

@@ -17,6 +17,7 @@ struct XiaomiParseResult {
     TYPE_HHCCPOT002,
     TYPE_LYWSDCGQ,
     TYPE_LYWSD02,
+    TYPE_LYWSD02MMC,
     TYPE_CGG1,
     TYPE_LYWSD03MMC,
     TYPE_CGD1,

esphome/components/xiaomi_lywsd02mmc/sensor.py

@@ -0,0 +1,77 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import sensor, esp32_ble_tracker
+from esphome.const import (
+    CONF_BATTERY_LEVEL,
+    CONF_HUMIDITY,
+    CONF_MAC_ADDRESS,
+    CONF_TEMPERATURE,
+    DEVICE_CLASS_TEMPERATURE,
+    ENTITY_CATEGORY_DIAGNOSTIC,
+    STATE_CLASS_MEASUREMENT,
+    UNIT_CELSIUS,
+    UNIT_PERCENT,
+    DEVICE_CLASS_HUMIDITY,
+    DEVICE_CLASS_BATTERY,
+    CONF_ID,
+    CONF_BINDKEY,
+)
+
+AUTO_LOAD = ["xiaomi_ble"]
+CODEOWNERS = ["@juanluss31"]
+DEPENDENCIES = ["esp32_ble_tracker"]
+
+xiaomi_lywsd02mmc_ns = cg.esphome_ns.namespace("xiaomi_lywsd02mmc")
+XiaomiLYWSD02MMC = xiaomi_lywsd02mmc_ns.class_(
+    "XiaomiLYWSD02MMC", esp32_ble_tracker.ESPBTDeviceListener, cg.Component
+)
+
+CONFIG_SCHEMA = (
+    cv.Schema(
+        {
+            cv.GenerateID(): cv.declare_id(XiaomiLYWSD02MMC),
+            cv.Required(CONF_MAC_ADDRESS): cv.mac_address,
+            cv.Required(CONF_BINDKEY): cv.bind_key,
+            cv.Optional(CONF_TEMPERATURE): sensor.sensor_schema(
+                unit_of_measurement=UNIT_CELSIUS,
+                accuracy_decimals=1,
+                device_class=DEVICE_CLASS_TEMPERATURE,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_HUMIDITY): sensor.sensor_schema(
+                unit_of_measurement=UNIT_PERCENT,
+                accuracy_decimals=0,
+                device_class=DEVICE_CLASS_HUMIDITY,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_BATTERY_LEVEL): sensor.sensor_schema(
+                unit_of_measurement=UNIT_PERCENT,
+                accuracy_decimals=0,
+                device_class=DEVICE_CLASS_BATTERY,
+                state_class=STATE_CLASS_MEASUREMENT,
+                entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+            ),
+        }
+    )
+    .extend(esp32_ble_tracker.ESP_BLE_DEVICE_SCHEMA)
+    .extend(cv.COMPONENT_SCHEMA)
+)
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+    await esp32_ble_tracker.register_ble_device(var, config)
+
+    cg.add(var.set_address(config[CONF_MAC_ADDRESS].as_hex))
+    cg.add(var.set_bindkey(config[CONF_BINDKEY]))
+
+    if temperature_config := config.get(CONF_TEMPERATURE):
+        sens = await sensor.new_sensor(temperature_config)
+        cg.add(var.set_temperature(sens))
+    if humidity_config := config.get(CONF_HUMIDITY):
+        sens = await sensor.new_sensor(humidity_config)
+        cg.add(var.set_humidity(sens))
+    if battery_level_config := config.get(CONF_BATTERY_LEVEL):
+        sens = await sensor.new_sensor(battery_level_config)
+        cg.add(var.set_battery_level(sens))

esphome/components/xiaomi_lywsd02mmc/xiaomi_lywsd02mmc.cpp

@@ -0,0 +1,73 @@
+#include "xiaomi_lywsd02mmc.h"
+#include "esphome/core/log.h"
+
+#ifdef USE_ESP32
+
+namespace esphome {
+namespace xiaomi_lywsd02mmc {
+
+static const char *const TAG = "xiaomi_lywsd02mmc";
+
+void XiaomiLYWSD02MMC::dump_config() {
+  ESP_LOGCONFIG(TAG, "Xiaomi LYWSD02MMC");
+  ESP_LOGCONFIG(TAG, "  Bindkey: %s", format_hex_pretty(this->bindkey_, 16).c_str());
+  LOG_SENSOR("  ", "Temperature", this->temperature_);
+  LOG_SENSOR("  ", "Humidity", this->humidity_);
+  LOG_SENSOR("  ", "Battery Level", this->battery_level_);
+}
+
+bool XiaomiLYWSD02MMC::parse_device(const esp32_ble_tracker::ESPBTDevice &device) {
+  if (device.address_uint64() != this->address_) {
+    ESP_LOGVV(TAG, "parse_device(): unknown MAC address.");
+    return false;
+  }
+  ESP_LOGVV(TAG, "parse_device(): MAC address %s found.", device.address_str().c_str());
+
+  bool success = false;
+  for (auto &service_data : device.get_service_datas()) {
+    auto res = xiaomi_ble::parse_xiaomi_header(service_data);
+    if (!res.has_value()) {
+      continue;
+    }
+    if (res->is_duplicate) {
+      continue;
+    }
+    if (res->has_encryption &&
+        (!(xiaomi_ble::decrypt_xiaomi_payload(const_cast<std::vector<uint8_t> &>(service_data.data), this->bindkey_,
+                                              this->address_)))) {
+      continue;
+    }
+    if (!(xiaomi_ble::parse_xiaomi_message(service_data.data, *res))) {
+      continue;
+    }
+    if (!(xiaomi_ble::report_xiaomi_results(res, device.address_str()))) {
+      continue;
+    }
+    if (res->temperature.has_value() && this->temperature_ != nullptr)
+      this->temperature_->publish_state(*res->temperature);
+    if (res->humidity.has_value() && this->humidity_ != nullptr)
+      this->humidity_->publish_state(*res->humidity);
+    if (res->battery_level.has_value() && this->battery_level_ != nullptr)
+      this->battery_level_->publish_state(*res->battery_level);
+    success = true;
+  }
+
+  return success;
+}
+
+void XiaomiLYWSD02MMC::set_bindkey(const std::string &bindkey) {
+  memset(this->bindkey_, 0, 16);
+  if (bindkey.size() != 32) {
+    return;
+  }
+  char temp[3] = {0};
+  for (int i = 0; i < 16; i++) {
+    strncpy(temp, &(bindkey.c_str()[i * 2]), 2);
+    this->bindkey_[i] = std::strtoul(temp, nullptr, 16);
+  }
+}
+
+}  // namespace xiaomi_lywsd02mmc
+}  // namespace esphome
+
+#endif

esphome/components/xiaomi_lywsd02mmc/xiaomi_lywsd02mmc.h

@@ -0,0 +1,37 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/components/esp32_ble_tracker/esp32_ble_tracker.h"
+#include "esphome/components/xiaomi_ble/xiaomi_ble.h"
+
+#ifdef USE_ESP32
+
+namespace esphome {
+namespace xiaomi_lywsd02mmc {
+
+class XiaomiLYWSD02MMC : public Component, public esp32_ble_tracker::ESPBTDeviceListener {
+ public:
+  void set_address(uint64_t address) { this->address_ = address; }
+  void set_bindkey(const std::string &bindkey);
+
+  bool parse_device(const esp32_ble_tracker::ESPBTDevice &device) override;
+
+  void dump_config() override;
+  float get_setup_priority() const override { return setup_priority::DATA; }
+  void set_temperature(sensor::Sensor *temperature) { this->temperature_ = temperature; }
+  void set_humidity(sensor::Sensor *humidity) { this->humidity_ = humidity; }
+  void set_battery_level(sensor::Sensor *battery_level) { this->battery_level_ = battery_level; }
+
+ protected:
+  uint64_t address_;
+  uint8_t bindkey_[16];
+  sensor::Sensor *temperature_{nullptr};
+  sensor::Sensor *humidity_{nullptr};
+  sensor::Sensor *battery_level_{nullptr};
+};
+
+}  // namespace xiaomi_lywsd02mmc
+}  // namespace esphome
+
+#endif

script/setup.bat

@@ -0,0 +1,28 @@
+@echo off
+
+if defined DEVCONTAINER goto :install
+if defined VIRTUAL_ENV goto :install
+if defined ESPHOME_NO_VENV goto :install
+
+echo Starting the Virtual Environment
+python -m venv venv
+call venv/Scripts/activate
+echo Running the Virtual Environment
+
+:install
+
+echo Installing required packages...
+
+python.exe -m pip install --upgrade pip
+
+pip3 install -r requirements.txt -r requirements_optional.txt -r requirements_test.txt -r requirements_dev.txt
+pip3 install setuptools wheel
+pip3 install -e ".[dev,test,displays]" --config-settings editable_mode=compat
+
+pre-commit install
+
+python script/platformio_install_deps.py platformio.ini --libraries --tools --platforms
+
+echo .
+echo .
+echo Virtual environment created. Run 'venv/Scripts/activate' to use it.

tests/components/web_server/common_v1.yaml

@@ -1,4 +1,5 @@
-<<: !include common.yaml
+packages:
+  device_base: !include common.yaml
 
 web_server:
   port: 8080

tests/components/web_server/common_v2.yaml

@@ -1,4 +1,5 @@
-<<: !include common.yaml
+packages:
+  device_base: !include common.yaml
 
 web_server:
   port: 8080

tests/components/xiaomi_lywsd02mmc/common.yaml

@@ -0,0 +1,12 @@
+esp32_ble_tracker:
+
+sensor:
+  - platform: xiaomi_lywsd02mmc
+    mac_address: A4:C1:38:54:5E:18
+    bindkey: 2529d8e0d23150a588675cc54ad48400
+    temperature:
+      name: Xiaomi LYWSD02MMC Temperature
+    humidity:
+      name: Xiaomi LYWSD02MMC Humidity
+    battery_level:
+      name: Xiaomi LYWSD02MMC Battery Level

tests/components/xiaomi_lywsd02mmc/test.esp32-ard.yaml

@@ -0,0 +1 @@
+<<: !include common.yaml

tests/components/xiaomi_lywsd02mmc/test.esp32-c3-ard.yaml

@@ -0,0 +1 @@
+<<: !include common.yaml

tests/components/xiaomi_lywsd02mmc/test.esp32-c3-idf.yaml

@@ -0,0 +1 @@
+<<: !include common.yaml

tests/components/xiaomi_lywsd02mmc/test.esp32-idf.yaml

@@ -0,0 +1 @@
+<<: !include common.yaml