diff --git a/esphome/components/ssd1306_base/__init__.py b/esphome/components/ssd1306_base/__init__.py
index f4abd845c8..55239dfcb8 100644
--- a/esphome/components/ssd1306_base/__init__.py
+++ b/esphome/components/ssd1306_base/__init__.py
@@ -33,6 +33,7 @@ MODELS = {
     "SH1106_96X16": SSD1306Model.SH1106_MODEL_96_16,
     "SH1106_64X48": SSD1306Model.SH1106_MODEL_64_48,
     "SH1107_128X64": SSD1306Model.SH1107_MODEL_128_64,
+    "SH1107_128X128": SSD1306Model.SH1107_MODEL_128_128,
     "SSD1305_128X32": SSD1306Model.SSD1305_MODEL_128_32,
     "SSD1305_128X64": SSD1306Model.SSD1305_MODEL_128_64,
 }
@@ -63,8 +64,10 @@ SSD1306_SCHEMA = display.FULL_DISPLAY_SCHEMA.extend(
         cv.Optional(CONF_EXTERNAL_VCC): cv.boolean,
         cv.Optional(CONF_FLIP_X, default=True): cv.boolean,
         cv.Optional(CONF_FLIP_Y, default=True): cv.boolean,
-        cv.Optional(CONF_OFFSET_X, default=0): cv.int_range(min=-32, max=32),
-        cv.Optional(CONF_OFFSET_Y, default=0): cv.int_range(min=-32, max=32),
+        # Offsets determine shifts of memory location to LCD rows/columns,
+        # and this family of controllers supports up to 128x128 screens
+        cv.Optional(CONF_OFFSET_X, default=0): cv.int_range(min=0, max=128),
+        cv.Optional(CONF_OFFSET_Y, default=0): cv.int_range(min=0, max=128),
         cv.Optional(CONF_INVERT, default=False): cv.boolean,
     }
 ).extend(cv.polling_component_schema("1s"))
diff --git a/esphome/components/ssd1306_base/ssd1306_base.cpp b/esphome/components/ssd1306_base/ssd1306_base.cpp
index 3cacd473d1..00b5c2d5a2 100644
--- a/esphome/components/ssd1306_base/ssd1306_base.cpp
+++ b/esphome/components/ssd1306_base/ssd1306_base.cpp
@@ -35,16 +35,31 @@ static const uint8_t SSD1306_COMMAND_INVERSE_DISPLAY = 0xA7;
 static const uint8_t SSD1305_COMMAND_SET_BRIGHTNESS = 0x82;
 static const uint8_t SSD1305_COMMAND_SET_AREA_COLOR = 0xD8;
 
+static const uint8_t SH1107_COMMAND_SET_START_LINE = 0xDC;
+static const uint8_t SH1107_COMMAND_CHARGE_PUMP = 0xAD;
+
 void SSD1306::setup() {
   this->init_internal_(this->get_buffer_length_());
 
+  // SH1107 resources
+  //
+  // Datasheet v2.3:
+  // www.displayfuture.com/Display/datasheet/controller/SH1107.pdf
+  // Adafruit C++ driver:
+  // github.com/adafruit/Adafruit_SH110x
+  // Adafruit CircuitPython driver:
+  // github.com/adafruit/Adafruit_CircuitPython_DisplayIO_SH1107
+
   // Turn off display during initialization (0xAE)
   this->command(SSD1306_COMMAND_DISPLAY_OFF);
 
-  // Set oscillator frequency to 4'b1000 with no clock division (0xD5)
-  this->command(SSD1306_COMMAND_SET_DISPLAY_CLOCK_DIV);
-  // Oscillator frequency <= 4'b1000, no clock division
-  this->command(0x80);
+  // If SH1107, use POR defaults (0x50) = divider 1, frequency +0%
+  if (!this->is_sh1107_()) {
+    // Set oscillator frequency to 4'b1000 with no clock division (0xD5)
+    this->command(SSD1306_COMMAND_SET_DISPLAY_CLOCK_DIV);
+    // Oscillator frequency <= 4'b1000, no clock division
+    this->command(0x80);
+  }
 
   // Enable low power display mode for SSD1305 (0xD8)
   if (this->is_ssd1305_()) {
@@ -60,11 +75,26 @@ void SSD1306::setup() {
   this->command(SSD1306_COMMAND_SET_DISPLAY_OFFSET_Y);
   this->command(0x00 + this->offset_y_);
 
-  // Set start line at line 0 (0x40)
-  this->command(SSD1306_COMMAND_SET_START_LINE | 0x00);
+  if (this->is_sh1107_()) {
+    // Set start line at line 0 (0xDC)
+    this->command(SH1107_COMMAND_SET_START_LINE);
+    this->command(0x00);
+  } else {
+    // Set start line at line 0 (0x40)
+    this->command(SSD1306_COMMAND_SET_START_LINE | 0x00);
+  }
 
-  // SSD1305 does not have charge pump
-  if (!this->is_ssd1305_()) {
+  if (this->is_ssd1305_()) {
+    // SSD1305 does not have charge pump
+  } else if (this->is_sh1107_()) {
+    // Enable charge pump (0xAD)
+    this->command(SH1107_COMMAND_CHARGE_PUMP);
+    if (this->external_vcc_) {
+      this->command(0x8A);
+    } else {
+      this->command(0x8B);
+    }
+  } else {
     // Enable charge pump (0x8D)
     this->command(SSD1306_COMMAND_CHARGE_PUMP);
     if (this->external_vcc_) {
@@ -76,34 +106,41 @@ void SSD1306::setup() {
 
   // Set addressing mode to horizontal (0x20)
   this->command(SSD1306_COMMAND_MEMORY_MODE);
-  this->command(0x00);
-
+  if (!this->is_sh1107_()) {
+    // SH1107 memory mode is a 1 byte command
+    this->command(0x00);
+  }
   // X flip mode (0xA0, 0xA1)
   this->command(SSD1306_COMMAND_SEGRE_MAP | this->flip_x_);
 
   // Y flip mode (0xC0, 0xC8)
   this->command(SSD1306_COMMAND_COM_SCAN_INC | (this->flip_y_ << 3));
 
-  // Set pin configuration (0xDA)
-  this->command(SSD1306_COMMAND_SET_COM_PINS);
-  switch (this->model_) {
-    case SSD1306_MODEL_128_32:
-    case SH1106_MODEL_128_32:
-    case SSD1306_MODEL_96_16:
-    case SH1106_MODEL_96_16:
-      this->command(0x02);
-      break;
-    case SSD1306_MODEL_128_64:
-    case SH1106_MODEL_128_64:
-    case SSD1306_MODEL_64_48:
-    case SSD1306_MODEL_64_32:
-    case SH1106_MODEL_64_48:
-    case SH1107_MODEL_128_64:
-    case SSD1305_MODEL_128_32:
-    case SSD1305_MODEL_128_64:
-    case SSD1306_MODEL_72_40:
-      this->command(0x12);
-      break;
+  if (!this->is_sh1107_()) {
+    // Set pin configuration (0xDA)
+    this->command(SSD1306_COMMAND_SET_COM_PINS);
+    switch (this->model_) {
+      case SSD1306_MODEL_128_32:
+      case SH1106_MODEL_128_32:
+      case SSD1306_MODEL_96_16:
+      case SH1106_MODEL_96_16:
+        this->command(0x02);
+        break;
+      case SSD1306_MODEL_128_64:
+      case SH1106_MODEL_128_64:
+      case SSD1306_MODEL_64_48:
+      case SSD1306_MODEL_64_32:
+      case SH1106_MODEL_64_48:
+      case SSD1305_MODEL_128_32:
+      case SSD1305_MODEL_128_64:
+      case SSD1306_MODEL_72_40:
+        this->command(0x12);
+        break;
+      case SH1107_MODEL_128_64:
+      case SH1107_MODEL_128_128:
+        // Not used, but prevents build warning
+        break;
+    }
   }
 
   // Pre-charge period (0xD9)
@@ -118,6 +155,7 @@ void SSD1306::setup() {
   this->command(SSD1306_COMMAND_SET_VCOM_DETECT);
   switch (this->model_) {
     case SH1107_MODEL_128_64:
+    case SH1107_MODEL_128_128:
       this->command(0x35);
       break;
     case SSD1306_MODEL_72_40:
@@ -149,7 +187,7 @@ void SSD1306::setup() {
   this->turn_on();
 }
 void SSD1306::display() {
-  if (this->is_sh1106_()) {
+  if (this->is_sh1106_() || this->is_sh1107_()) {
     this->write_display_data();
     return;
   }
@@ -183,6 +221,7 @@ bool SSD1306::is_sh1106_() const {
   return this->model_ == SH1106_MODEL_96_16 || this->model_ == SH1106_MODEL_128_32 ||
          this->model_ == SH1106_MODEL_128_64;
 }
+bool SSD1306::is_sh1107_() const { return this->model_ == SH1107_MODEL_128_64 || this->model_ == SH1107_MODEL_128_128; }
 bool SSD1306::is_ssd1305_() const {
   return this->model_ == SSD1305_MODEL_128_64 || this->model_ == SSD1305_MODEL_128_64;
 }
@@ -224,6 +263,7 @@ void SSD1306::turn_off() {
 int SSD1306::get_height_internal() {
   switch (this->model_) {
     case SH1107_MODEL_128_64:
+    case SH1107_MODEL_128_128:
       return 128;
     case SSD1306_MODEL_128_32:
     case SSD1306_MODEL_64_32:
@@ -254,6 +294,7 @@ int SSD1306::get_width_internal() {
     case SH1106_MODEL_128_64:
     case SSD1305_MODEL_128_32:
     case SSD1305_MODEL_128_64:
+    case SH1107_MODEL_128_128:
       return 128;
     case SSD1306_MODEL_96_16:
     case SH1106_MODEL_96_16:
diff --git a/esphome/components/ssd1306_base/ssd1306_base.h b/esphome/components/ssd1306_base/ssd1306_base.h
index 4b0e9bb80e..34b76d284d 100644
--- a/esphome/components/ssd1306_base/ssd1306_base.h
+++ b/esphome/components/ssd1306_base/ssd1306_base.h
@@ -19,6 +19,7 @@ enum SSD1306Model {
   SH1106_MODEL_96_16,
   SH1106_MODEL_64_48,
   SH1107_MODEL_128_64,
+  SH1107_MODEL_128_128,
   SSD1305_MODEL_128_32,
   SSD1305_MODEL_128_64,
 };
@@ -58,6 +59,7 @@ class SSD1306 : public PollingComponent, public display::DisplayBuffer {
   void init_reset_();
 
   bool is_sh1106_() const;
+  bool is_sh1107_() const;
   bool is_ssd1305_() const;
 
   void draw_absolute_pixel_internal(int x, int y, Color color) override;
diff --git a/esphome/components/ssd1306_i2c/ssd1306_i2c.cpp b/esphome/components/ssd1306_i2c/ssd1306_i2c.cpp
index 96734eb618..ed7cf102ee 100644
--- a/esphome/components/ssd1306_i2c/ssd1306_i2c.cpp
+++ b/esphome/components/ssd1306_i2c/ssd1306_i2c.cpp
@@ -38,13 +38,19 @@ void I2CSSD1306::dump_config() {
 }
 void I2CSSD1306::command(uint8_t value) { this->write_byte(0x00, value); }
 void HOT I2CSSD1306::write_display_data() {
-  if (this->is_sh1106_()) {
+  if (this->is_sh1106_() || this->is_sh1107_()) {
     uint32_t i = 0;
     for (uint8_t page = 0; page < (uint8_t) this->get_height_internal() / 8; page++) {
       this->command(0xB0 + page);  // row
-      this->command(0x02);         // lower column
-      this->command(0x10);         // higher column
-
+      if (this->is_sh1106_()) {
+        this->command(0x02);  // lower column - 0x02 is historical SH1106 value
+      } else {
+        // Other SH1107 drivers use 0x00
+        // Column values dont change and it seems they can be set only once,
+        // but we follow SH1106 implementation and resend them
+        this->command(0x00);
+      }
+      this->command(0x10);  // higher column
       for (uint8_t x = 0; x < (uint8_t) this->get_width_internal() / 16; x++) {
         uint8_t data[16];
         for (uint8_t &j : data)
diff --git a/esphome/components/ssd1306_spi/ssd1306_spi.cpp b/esphome/components/ssd1306_spi/ssd1306_spi.cpp
index 7f025d77cd..0a0debfd65 100644
--- a/esphome/components/ssd1306_spi/ssd1306_spi.cpp
+++ b/esphome/components/ssd1306_spi/ssd1306_spi.cpp
@@ -36,10 +36,14 @@ void SPISSD1306::command(uint8_t value) {
   this->disable();
 }
 void HOT SPISSD1306::write_display_data() {
-  if (this->is_sh1106_()) {
+  if (this->is_sh1106_() || this->is_sh1107_()) {
     for (uint8_t y = 0; y < (uint8_t) this->get_height_internal() / 8; y++) {
       this->command(0xB0 + y);
-      this->command(0x02);
+      if (this->is_sh1106_()) {
+        this->command(0x02);
+      } else {
+        this->command(0x00);
+      }
       this->command(0x10);
       this->dc_pin_->digital_write(true);
       for (uint8_t x = 0; x < (uint8_t) this->get_width_internal(); x++) {