Commit graph

2673 commits

Author SHA1 Message Date
Otto Winter
b78b28ea0e
Fix platformio monkey patch (#768) 2019-10-18 15:33:30 +02:00
Otto Winter
aed7b3fbb2
Fix typo in Component::set_interval (#767)
Ouch...
2019-10-18 15:33:18 +02:00
Otto Winter
1ade7bcb2d
Fix filter_out bug 2019-10-18 14:58:06 +02:00
Otto Winter
21bbafb63d
Captive portal fixes (#766)
* Enable MDNS logs comment

* Work around ESP8266 mDNS broken for AP

See also https://github.com/esp8266/Arduino/issues/6114

* Enable captive_portal in AP-only mode

Fixes https://github.com/esphome/issues/issues/671

* Make ESP32 connecting faster

See also https://github.com/espressif/arduino-esp32/pull/2989

* Format
2019-10-18 14:46:44 +02:00
Otto Winter
1cfc6ac3c6
Update ESP8266/ESP32 bases (#760)
* Update ESP8266/ESP32 bases

* Update platformio.ini

* Update boards definitions
2019-10-18 14:46:29 +02:00
Otto Winter
c3aa834d80
Fork some base libraries (#758)
* Fork some base libraries

* Update ESPAsyncWebServer
2019-10-18 14:46:09 +02:00
Otto Winter
68d0d045c0
Add LEDC set_frequency action (#754)
* Add LEDC set_frequency

Fixes https://github.com/esphome/feature-requests/issues/380

* Fix log

* Fixes

* Format

* Update test1.yaml

* Update test1.yaml

* Fix
2019-10-18 11:22:08 +02:00
Marcel van der Veldt
72d6471ab8 add support for climate action (#720)
* add support for climate action:

Following hass implementation of climate, action represents the current action the climate device is perfoming, e.g. cooling or heating

fix bang_bang climate:

make sure that the thresholds are always respected.
fixes the issue where the component would just keep on heating, regardless of the temperature range

* Updates

- Use dedicated enum for action (otherwise it gets confusing because "auto" is not a valid action)
- Add field to tell HA that action is supported
- Revert semantic changes in bang_bang

* Conditional print


Co-authored-by: Otto Winter <otto@otto-winter.com>
2019-10-18 10:39:14 +02:00
Otto Winter
22aecdfc6f
Use higher default baudrate for USB upload (#761)
See also https://github.com/espressif/esptool/issues/435
2019-10-18 10:23:06 +02:00
Otto Winter
ee0b6e835f
Sensor filter_out rounded (#765)
Fixes https://github.com/esphome/issues/issues/741
2019-10-18 10:22:29 +02:00
Guillermo Ruffino
8292024306 add tcl112 receiver (#762) 2019-10-18 09:22:55 +02:00
Guillermo Ruffino
84cfcf2b4a vscode support check file exists (#763)
* vscode support check file exists

* ups. formatter got disabled
2019-10-18 09:17:16 +02:00
nicuh
ea762b7295 Fix remote_transmitter type_a encoding (#742)
Co-authored-by: Nicu Hodos <nicu@hodos.ro>
2019-10-18 09:05:37 +02:00
Nikolay Vasilchuk
d51c0f13c0 SenseAir S8 CO2 sensor support (#705)
* Компилится

* Tests

* Checksum calculation

* Read status
2019-10-17 21:37:24 +02:00
Otto Winter
6ceb975a3a
calibrate_linear check not all from values same (#714)
Fixes https://github.com/esphome/issues/issues/524
2019-10-17 21:35:59 +02:00
Otto Winter
9a40d6ef50
Integration sensor use double precision (#715)
Fixes https://github.com/esphome/issues/issues/534

Kept the RTC value as a float in order not to introduce a breaking preferences change.
2019-10-17 21:35:31 +02:00
Otto Winter
32195f77d9
Fix dallas not unknown (#716)
* Fix dallas not sending unknown on disconnected sensor

* Deep sleep
2019-10-17 21:34:58 +02:00
Guillermo Ruffino
578e5a0d7a Base climate ir (#726)
* add ClimateIR

* update climate ir

* update class comment

* lint

* moved to climate_ir

* fix include path

* use climateir

* updates

* update include path

* lint

* fixed variable assigned to itself
2019-10-17 21:01:02 +02:00
Lazar Obradovic
1242f43769 BME280: Increase sensor timeout (#727)
I'm facing some occasional timeouts when reading BME280. 
Looking at Adafruit driver (that this code is based on), I see that base math is using 1.25ms, increased by 2.3*oversampliing + 0.575 for each value being read. 
I've added 1.5ms as baseline, to be on the same safe.
2019-10-17 20:58:59 +02:00
Thomas Klingbeil
3bb6430495 Add support for TTGO ePaper module (#730)
* Add support for TTGO ePaper module

Use 2.13in-ttgo as type. Only different LUTs were needed, everything else is the same.

relates to issue #233.

* fix styling errors

* styling fixes


Co-authored-by: null <mandy.klingbeil@student.hpi.uni-potsdam.de>
2019-10-17 20:55:27 +02:00
Otto Winter
aae633277f
Fix strobe/flicker effect not using selected value (#749)
Fixes https://github.com/esphome/issues/issues/562
2019-10-17 19:15:02 +02:00
Otto Winter
996c50e8f2
Add rotary_encoder.set_value action (#747)
* Add rotary_encoder.set_value action

Fixes https://github.com/esphome/feature-requests/issues/389

* Fix
2019-10-17 19:14:52 +02:00
Otto Winter
95c883ae9b
Fix MCP23017 setup priority (#751)
Fixes https://github.com/esphome/issues/issues/535
2019-10-17 19:14:25 +02:00
Otto Winter
35a725fa1e
Update and pin all requirements (#759) 2019-10-17 18:23:39 +02:00
Otto Winter
78c1adafcd
Make UART flush function consistent (#748)
See also 78be9d2937
2019-10-17 16:54:38 +02:00
Otto Winter
e15071228e
Fix addressable light fade to black function (#752)
Fixes https://github.com/esphome/issues/issues/517
2019-10-17 16:53:55 +02:00
Otto Winter
ac48ff1fd6
Fix potential ISR digital_write issue (#753) 2019-10-17 16:53:39 +02:00
Guillermo Ruffino
428684bc1e Brightness ssd1306 (#723)
* added brightness for oled display ssd1306

* lint


Co-authored-by: waiet <vlado.rusnak23@gmail.com>
2019-10-17 16:36:11 +02:00
TomFahey
81b7653c9c Add mcp23008 support (#649)
* Add support for mcp23008 8-port io expander

* add-mcp23008-support

* Revert "add-mcp23008-support"

This reverts commit b4bc7785b1.

* Fixed spacing typo

* removed extra space in mcp23008.cpp, line 23

* Fixed trailing whitespace issue

* Added mcp23008 component

* Added component mcp23008

* Edited typo in test/test1.ymal

Removed additional ' in line 1337

* Another typo
2019-10-17 16:18:41 +02:00
Alexander Leisentritt
45736707bd fix CGG1 log message (#757) 2019-10-17 14:02:41 +02:00
Alexander Leisentritt
cdfbe5b523 refactored xiaomi sensors (#755)
* refactored xiaomi sensors

* fix lint

* fixed and added tests

* fix namespace

* LYWSD02 has no battery level

* fixed enum

* fix

* fix case

* fix spaces in empty line...

* inform users of old sensors about the change
2019-10-16 13:29:56 +02:00
Otto Winter
cdb9c59662
Add ADE7953 Support (#593)
* Add ADE795 support

* Lint

* Fix

* Fix, add test
2019-10-16 13:19:41 +02:00
amishv
9c30f4cc68 Fix for PCF8574 output chattering at the start/reboot (#744)
* Fix for PCF8574 output chattering at the start/reboot

* Fix for PCF8574 output chattering at the start/reboot

* Fix for PCF8574 output chattering at the start/reboot


Co-authored-by: Amish Vishwakarma <vishwakarma.amish@gmai.com>
2019-10-15 21:31:52 +02:00
Otto Winter
acf3f6fb65
Fix outdated voluptuous pinning
See also https://github.com/esphome/esphome/pull/745#issuecomment-541831600
2019-10-15 21:00:58 +02:00
Otto Winter
23f99908db
Apply HDC1080 patch from @Hsxsky
See also 105ac63d62
2019-10-15 20:53:59 +02:00
Otto Winter
a0046a2e55
Pin voluptuous version
Closes https://github.com/esphome/esphome/pull/745
2019-10-14 14:42:18 +02:00
Sergio Mayoral Martínez
e30512931b Add Xiaomi Cleargrass Temperature and Humidity Sensor (#735)
* Add Xiaomi Cleargrass Temperature and Humidity Sensor

* fix CI Travis

* fix CI Travis 2

* Improve device detection (more accurate)


Co-authored-by: t151602 <sergio.mayoralmartinez@telefonica.com>
2019-10-14 13:25:08 +02:00
Otto Winter
e207c6ad84
Fix ct_clamp update
Fixes https://github.com/esphome/issues/issues/684
2019-10-14 12:06:23 +02:00
Levente Tamas
9d7f76773d Add support for TI TLC59208F (#718)
* Add support for TI TLC59208F

The chip is a 8-BIT FM+ I2C BUS LED DRIVER with
8 open-drain output channels.

Its features include:
- 256 linear levels
- group dimming
- group blinking
- 64 slave addresses
- customizable sub addresses and all call address
- output update on stop or on ACK
- 3.3V or 5V supply with 5V tolerant IO
- no glitch startup
- 50mA / output continuous current up to 17V

* Convert macro to uint8_t

Variables had to be renamed, clang-format would protest against
mixed case in global variable name.

* Change gen-call reset to use the correct i2c bus
2019-10-14 11:30:41 +02:00
Michiel van Turnhout
5f2808ec2f support for the sx1509 i2c device (#651)
* added ANALOG_OUTPUT as first functionality

* added gpio

* seperated the code for different functions

* fixed code

* Revert "fixed code"

This reverts commit 0c6eacb225.

* add timings for breathe and blink

* made the sx1509_float_output am output component

* add keypad

* implementation for sx1509 keypad

* keypad code cleanup and first device tests

* debounce

* keypad working now.

* update for timings.
does not compile yet

* added all options for breathe and blink
fixed var namings

* blink and breath still not ok

* fixed ms for timings

* sync with repo

* fixed issue with gpio pin output

* code cleanup

* lint

* more lint

* remove log from header

* Update esphome/components/sx1509/__init__.py

Co-Authored-By: Otto Winter <otto@otto-winter.com>

* review

* feedback

* fixed review issues
did some extended testing with mqtt spy

* code cleanup (comments)

* fixed row col swap for binarysensor_keypad

* flake and lint

* travis

* travis

* travis

* Update esphome/components/sx1509/sx1509.cpp

Co-Authored-By: Otto Winter <otto@otto-winter.com>

* review

* separated platforms

* code cleanup

* travis relative paths in python

* remove blink/breathe
code cleanup

* cpp lint

* feedback

* travis

* lint line to long

* check keypad settings to be valid

* clang

* keypad config

* text

* Remove wrong .gitignore from .gitignore

* Remove .pio folder from .gitignore (merge)

* Formatting

* Formatting

* Add i2c log in dump_config

* Remove unused variables

* Disable static for header files

We don't need internal linkage

* Use consistent member default argument style

* Run clang-format


Co-authored-by: null <m.vanturnhout@exxellence.nl>
Co-authored-by: Otto Winter <otto@otto-winter.com>
2019-10-14 11:27:50 +02:00
Nikolay Vasilchuk
be91cfb261 Device description in dashboard (#707)
* Description

* Review fixes

* Test

* Label

* Description renamed to comment
2019-10-14 11:27:07 +02:00
Nad
0eadda77b0 Improve SHT3xD reconnect handling (#675)
* Add support for Sensirion STS3x Temperature sensors

* Removed humidty reading from STS3x sensor

* Fixed line error and operand error

* Fixed syntax

* Add test snippet for STS3x sensor

* Clean up

* #550 Fix STH3x component reporting WARNING status and reinitialzing the sensor upon reconnecting.

* #550 Fix lint issues

* Delete __init__.py

* Delete sensor.py

* Delete sts3x.cpp

* Delete sts3x.h

* Delete test1.yaml

* Revert "Delete test1.yaml"

This reverts commit 33e69fb703.

* Removed leaked STS3x changes from test
2019-10-13 17:46:21 +02:00
Nikolay Vasilchuk
b2388b6fe7 Basic Auth for web_server component (#674)
* Basic auth

* Test

* Linter fix

* Make username/password strict strings

Reason: passwords only consisting of digits (012345) will be silently converted (to "12345")


Co-authored-by: Otto Winter <otto@otto-winter.com>
2019-10-13 14:27:44 +02:00
Nikolay Vasilchuk
1a763ae974 Authorization by username and password (#668)
* Auth

* Logout

* Lint fix

* Small hassio fix

* Reverted uppercase

* Secrets editor

* Reverted secrets editor

* Reverted log height

* Fix default username
2019-10-13 13:52:02 +02:00
Otto Winter
38dfab11b4
Fix dev branch 2019-10-13 13:51:34 +02:00
Nikolay Vasilchuk
7c31592850 Secrets editor (#672)
* Secrets editor

* Check file exists
2019-10-13 12:57:28 +02:00
Nikolay Vasilchuk
57bee74225 Fill log height (#673) 2019-10-13 12:55:26 +02:00
Otto Winter
fa351cd37c
Cleanup AS3935 2019-10-12 17:03:01 +02:00
Thomas Eckerstorfer
68e7e5a51c AS3935 Lightning sensor (#666)
* added tx20 wind speed sensor

* added test

* fixed lint errors

* fixed more lint errors

* updated tx20

* updated tx20 sensor

* updated to new structure and removed static variables

* removed content from __init__.py

* fixing lint errors

* resolved issues from review

* added as3935 sensor

* updated as3935 with more settings

* update

* support for i2c + spi updated

* added tests and various fixes

* added tx20 wind speed sensor

* fixed lint errors

* fixed more lint errors

* updated tx20

* updated tx20 sensor

* updated to new structure and removed static variables

* removed content from __init__.py

* fixing lint errors

* resolved issues from review

* added as3935 sensor

* updated as3935 with more settings

* update

* support for i2c + spi updated

* added tests and various fixes

* updated tests

* fixed style issues

* Remove debug line

* Update log levels

* Reformat

* Auto-convert to int


Co-authored-by: Thomas <thomas.eckerstorfer@mic-cust.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
2019-10-12 15:03:35 +02:00
Abílio Costa
4d31ad3bdc Allow 64 bit codes and add nexa remote support. (#662)
* add nexa remote support.

This is inspired by: https://github.com/sui77/rc-switch/pull/124
As described there: "The remotes sold in ClasOhlson in scandinavia have
a slightly longer sync sequence(added a skip pulse field in the
protocol) and a 64 bit code word. Part of the code gets lost but that
seems to be OK until support for 64 bit codes is added."

* add default value to ctor

* allow 64bit codes

* lint

* make vars 64 bits
2019-10-12 14:42:27 +02:00