Commit graph

191 commits

Author SHA1 Message Date
Kamil Trzciński
0c0dec2534
Add WLED support (#1092)
A component to support [WLED](https://github.com/Aircoookie/WLED/wiki/UDP-Realtime-Control).
This allows to control addressable LEDs over WiFi/UDP, by pushing data right into LEDs.

The most useful to use [Prismatik](https://github.com/psieg/Lightpack) to create
an immersive effect on PC.

It supports all WLED protocols:
- WARLS
- DRGB
- DRGBW
- DNRGB
- WLED Notifier

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-06-12 20:50:09 -03:00
Kamil Trzciński
d1b051a6bd
Add Adalight support (#956)
A component to support [Adalight](https://learn.adafruit.com/adalight-diy-ambient-tv-lighting).
This allows to control addressable LEDs over UART, by pushing data right into LEDs.

The most useful to use [Prismatik](https://github.com/psieg/Lightpack) to create
an immersive effect on PC.

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-06-12 20:34:38 -03:00
Kamil Trzciński
27204aa53c
Add E1.31 support (#950)
This adds a `e131` component that allows
to register `e131` addressable light effect.

This uses an internal implementation that
is thread-safe instead of using external libraries.
2020-06-12 20:17:13 -03:00
Evgeny
42007d03d4
AQI calculator for HM3301 (#1011)
* HM3301 AQI calculator

* remove logs

* fixed after lint

* fixed after lint

* fixed after lint

* check NP for AQI sensor

* validation for AQI sensor
2020-06-11 23:14:54 -03:00
Marvin Gaube
f63fd9696f
Add Webserver Prometheus support for sensor, binary sensor, fan, light, cover and switch (#1032) 2020-06-09 22:00:12 -03:00
Kamil Trzciński
cd7af19e7c
Extend uart: with rx_buffer_size: (#1006)
* Extend `uart:` with `rx_buffer_size:`

This allows to configure `rx_buffer_size:`
to efficiently receive big payloads over UART

* lint

* remove old default value

* add test

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-06-09 21:22:06 -03:00
rradar
d1f4c2ab57
BH1750 Measurement time (#997)
* BH1750 Measurement time

Fixes https://github.com/esphome/feature-requests/issues/148

* lint

* add test

Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-05-28 23:10:34 -03:00
Alexander Pohl
3fba3a5e2e
Add support for additional Xiaomi BLE sensors (#1027) (#1027) 2020-05-26 19:33:28 -03:00
declanshanaghy
e64246f642
Adding support for MAX31856 Thermocouple Temperature Sensor (feature #700) (#1039) 2020-05-24 19:33:59 -03:00
0hax
fb2b7ade41
Uart improvments (#1024)
* uart: Add support for specifying the number of bits and parity.

ESP8266SwSerial doesn't really check parity but just read the parity bit
and ignore it when receiving data.

Signed-off-by: 0hax <0hax@protonmail.com>

* uart: support begin and end methods.

A component may need to reset uart buffer/status by using begin() and
end() methods. This is useful for example when a component needs to be
sure it is not reading garbage from previously received data over uart.
For end() methods with software serial, disabling interrupt is
currently impossible because of a bug in esp8266 Core:
https://github.com/esp8266/Arduino/issues/6049

Signed-off-by: 0hax <0hax@protonmail.com>

* esphal: add support for detaching an interrupt.

That's needed when a component needs to enable/disable interrupt on a
gpio.

Signed-off-by: 0hax <0hax@protonmail.com>

* uart: rename CONF_NR_BITS to CONF_DATA_BITS_NUMBER.

Signed-off-by: 0hax <0hax@protonmail.com>

* uart: use static const uint32_t instead of #define.

Signed-off-by: 0hax <0hax@protonmail.com>

* uart: use an enum to handle parity.

Signed-off-by: 0hax <0hax@protonmail.com>

* uart: split between esp32 and esp8266.

Signed-off-by: 0hax <0hax@protonmail.com>

* uart: check_uart_settings for parity and number of data bits.

Signed-off-by: 0hax <0hax@protonmail.com>

* name param data_bits

* add new params to test

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-05-24 18:59:07 -03:00
Oskar Napieraj
4de44a99eb
Add support for ESP32 DAC (#1071)
* Add support for ESP32 onboard DAC

* Newlines

* Tests
2020-05-24 00:06:55 -03:00
Jozef Zuzelka
153aadadae
Ble scanner (#976)
* Added ble_scanner component

* ble_scanner: time.h changed to ctime

* ble_scanner: Test added.

* ble_scanner: fixed code formatting.

* Removed duplicate binary sensor tests from test2 and test3 to decrease memory requirements.

* Removed another duplicate test from test2.yaml and moved stepper test to yaml3.yaml to reduce memory requirements of test2.yaml.

* Reverted the last stepper test change

* Moved some sensor tests from test2.yaml to test3.yaml to save memory.

* Moved ruuvitag back to test2.yaml as it requires component esp32_ble_tracker.

* removed apds9960 as it is duplicated

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-05-19 21:13:50 -03:00
Jesse Hills
26d6738abb
Allow tm1637 to use pins from IO expanders (#1058)
* Allow tm1637 to use pins from IO expanders

* Add test for io expander pins
2020-05-18 19:13:29 -03:00
Niklas Wagner
39b35b79ba
Make initial run variable available to addressable_lambda (#1035)
* Make initial run variable available to addressable_lambda

* Fix linting

* Remove if clause
2020-04-28 19:24:06 -03:00
puuu
ba1222eae4
Bluetooth advertising automation (#995)
* esp32_ble_tracker: introduce UUID comparison function

* ble_presence, ble_rssi: use new UUID comparison function

* esp32_ble_tracker: introduce automation on BLE advertising

* test2.yaml: remove deep_sleep due to firmware size restrictions
2020-04-27 20:57:02 -03:00
Guillermo Ruffino
31ae337931
add lights on off triggers (#1037)
* add lights on off triggers

* add test
2020-04-25 15:39:34 -03:00
Guillermo Ruffino
6123cb7c69
add mac address to wifi info (#1030)
* add mac address to wifi info

* add test

* lint
2020-04-24 20:58:32 -03:00
Guillermo Ruffino
8040e3cf95
Climate whirlpool (#1029)
* wip

* transmitter ready

* climate.whirlpool receiver implemented (#971)

* receiver implemented

* Support for two models of temp ranges

* temperature type and lint

* more lint

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>

* add test

* not mess line endings

Co-authored-by: mmanza <40872469+mmanza@users.noreply.github.com>
2020-04-21 22:53:14 -03:00
Tim Savage
d447548893
Tests for CPP Code generation and some Python3 improvements (#961)
* Basic pytest configuration

* Added unit_test script that triggers pytest

* Changed "fixtures" to fixture_path

This is consistent with pytest's tmp_path

* Initial unit tests for esphome.helpers

* Disabled coverage reporting for esphome/components.

Focus initial unittest efforts on the core code.

* Migrated some ip_address to hypothesis

* Added a hypothesis MAC address strategy

* Initial tests for core

* Added hypothesis to requirements

* Added tests for core classes

TestTimePeriod
Lambda
ID
DocumentLocation
DocumentRange
Define
Library

* Updated test config so package root is discovered

* Setup fixtures and inital tests for pins

* Added tests for validate GPIO

* Added tests for pin type

* Added initial config_validation tests

* Added more tests for config_validation

* Added comparison unit tests

* Added repr to core.TimePeriod. Simplified identifying faults in tests

* Fixed inverted gt/lt tests

* Some tests for Espcore

* Updated syntax for Python3

* Removed usage of kwarg that isn't required

* Started writing test cases

* Started writing test cases for cpp_generator

* Additional docs and more Python3 releated improvements

* More test cases for cpp_generator.

* Fixed linter errors

* Add codegen tests to ensure file API remains stable

* Add test cases for cpp_helpers
2020-04-19 21:05:58 -03:00
Alex Reid
c1dfed5c08
feat: Add support for MCP23016 IO Expander (#1012)
* feat: Add support for MCP23016 IO extander

* fix: Fix style
2020-04-12 16:07:10 -03:00
Otto Winter
835079ad43
Add AC Dimmer support (#880)
* Add AC Dimmer support

Fixes https://github.com/esphome/feature-requests/issues/278

* fixes

basically missed the output pin setup and in the switching was switching true true true :P

* Format

* Enable ESP32

* Also setup ZC pin

* Support multiple dimmers sharing ZC pin

* Fix ESP32

* Lint

* off gate on zc detect

* tests pins validation

* Climate Mitsubishi (#725)

* add climate

* Mitsubishi updates

* refactor mitsubishi to use climate_ir

* lint

* fix: only decode when not str already (#923)

Signed-off-by: wilmardo <info@wilmardenouden.nl>

* fix climate-ir bad merge (#935)

* fix climate-ir bad merge

* add mitshubishi test

* http_request: fix memory allocation (#916)

* http_request version fix (#917)

* PID Climate (#885)

* PID Climate

* Add sensor for debugging PID output value

* Add dump_config, use percent

* Add more observable values

* Update

* Set target temperature

* Add autotuner

* Add algorithm explanation

* Add autotuner action, update controller

* Add simulator

* Format

* Change defaults

* Updates

* Use b''.decode() instead of str(b'') (#941)

Handling of request arguments in WizardRequestHandler is not decoding
bytes and rather just doing a str conversion resulting in a value of
"b''" being supplied to the wizard code.

* Adding the espressif 2.6.3 (#944)

* extract and use current version of python 3 (#938)

* Inverted output in neopixelbus (#895)

* Added inverted output

* Added support for inverted output in neopixelbus

* Update esphome/components/neopixelbus/light.py

Co-Authored-By: Otto Winter <otto@otto-winter.com>

* Update light.py

* corrected lint errors

Co-authored-by: Otto Winter <otto@otto-winter.com>

* Added degree symbol for MAX7219 7-segment display. (#764)

The ascii char to use it is "~" (0x7E).

Disclaimer: I didn't test this yet.

* Fix dump/tx of 64 bit codes (#940)

* Fix dump/tx of 64 bit codes

* fixed source format

* Update hdc1080.cpp (#887)

* Update hdc1080.cpp

increase waittime, to fix reading errors

* Fix: Update HDC1080.cpp

i fixed the my change on write_bytes

* add tcl112 support for dry, fan and swing (#939)

* Fix SGP30 incorrect baseline reading/writing (#936)

* Split the SGP30 baseline into 2 values

- According to the SGP30 datasheet, each eCO2 and TVOC baseline is a 2-byte value (MSB first)
- The current implementation ignores the MSB of each of the value
- Update the schema to allow 2 different baseline values (optional, but both need to be specified for the baseline to apply)

* Make both eCO2 and TVOC required if the optional baseline is defined

* Make dump_config() looks better

* Add register_*_effect to allow registering custom effects (#947)

This allows to register custom effect from user components,
allowing for bigger composability of source.

* Bugfix/normalize core comparisons (and Python 3 update fixes) (#952)

* Correct implementation of comparisons to be Pythonic

If a comparison cannot be made return NotImplemented, this allows the
Python interpreter to try other comparisons (eg __ieq__) and either
return False (in the case of __eq__) or raise a TypeError
exception (eg in the case of __lt__).

* Python 3 updates

* Add a more helpful message in exception if platform is not defined

* Added a basic pre-commit check

* Add transmit pioneer (#922)

* Added pioneer_protocol to support transmit_pioneer

* Display tm1637 (#946)

* add TM1637 support

* Support a further variant of Xiaomi CGG1 (#930)

* Daikin climate ir component (#964)

* Daikin ARC43XXX IR remote controller support

* Format and lint fixes

* Check temperature values against allowed min/max

* fix tm1637 missing __init__.py (#975)

* Add AC Dimmer support

Fixes https://github.com/esphome/feature-requests/issues/278

* fixes

basically missed the output pin setup and in the switching was switching true true true :P

* Format

* Enable ESP32

* Also setup ZC pin

* Support multiple dimmers sharing ZC pin

* Fix ESP32

* Lint

* off gate on zc detect

* tests pins validation

* fix esp8266 many dimmers, changed timing

* Increased value resolution, added min power

* use min_power from base class

* fix min_power. add init with half cycle

* added method for trailing pulse, trailing and leading

* fix method name. try filter invalid falling pulse

* renamed to ac_dimmer

* fix ESP32 not configuring zero cross twice

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
Co-authored-by: Wilmar den Ouden <wilmardo@users.noreply.github.com>
Co-authored-by: Nikolay Vasilchuk <Anonym.tsk@gmail.com>
Co-authored-by: Tim Savage <tim@savage.company>
Co-authored-by: Vc <37367415+Valcob@users.noreply.github.com>
Co-authored-by: gitolicious <mrjchn@gmail.com>
Co-authored-by: voibit <krestean@gmail.com>
Co-authored-by: Luar Roji <cyberplant@users.noreply.github.com>
Co-authored-by: András Bíró <1202136+andrasbiro@users.noreply.github.com>
Co-authored-by: dmkif <dmkif@users.noreply.github.com>
Co-authored-by: Panuruj Khambanonda (PK) <pk@panurujk.com>
Co-authored-by: Kamil Trzciński <ayufan@ayufan.eu>
Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
Co-authored-by: Mario <4376789+mario-tux@users.noreply.github.com>
Co-authored-by: Héctor Giménez <hector.fwbz@gmail.com>
2020-04-10 00:07:18 -03:00
kroimon
8613c02d5c
Add constant_brightness property to CWWW/RGBWW lights (#1007)
Fixes https://github.com/esphome/feature-requests/issues/460

Co-authored-by: Otto Winter <otto@otto-winter.com>
2020-04-08 09:31:23 -03:00
Evgeny
dea6675c21
Add HM3301 laser dust detection sensor (#963)
* Add HM3301 laser dust detection sensor

* Fixed after lint

* Fixed after lint

* added status clear warning
2020-04-06 14:11:41 -03:00
Guillermo Ruffino
43cf3063e0
removes comments from lambda (#998)
* removes comments from lambda

* include comments in lambda test

* pylint no else return
2020-04-05 22:14:49 -03:00
Bartłomiej Biernacki
4620ad6124
Support for pcd8544 (nokia 5110 and 3310) screen (#973)
* First version of working compontent for pc8544 screen

* Fixed lint errors

* Fixed lint errors #2
2020-04-04 18:23:23 -03:00
Germain Masse
4ec636c08f
Add AHT10 sensor (#949) 2020-03-21 15:31:07 -03:00
John
4cb30a22ac
Corrections to default register values of ATM90E32 component (#982)
* Corrections to default register values of ATM90E32 component
2020-03-13 10:27:19 -07:00
Tim Savage
c632b0e1d4
Unittests for esphome python code (#931) 2020-03-12 14:27:22 -07:00
Nicholas Peters
714d28a61a
Add TMP117 component (#992)
* Create TMP117 sensor component
2020-03-12 14:25:00 -07:00
Pavel
c60989a7be
pzemac total energy support (#933)
* add energy support in pzemac sensor

Co-authored-by: Sergio Mayoral Martinez <sergiomayoralmartinez@gmail.com>
Co-authored-by: t151602 <sergio.mayoralmartinez@telefonica.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
2020-03-12 13:37:57 -07:00
Derek Hageman
11b727fdf7
SCD30 fixes and improvements (#962)
* SCD30 improvements
2020-03-11 17:39:40 -07:00
Evgeny
4402a6eb4c
Add TM1651 simple level, turn on, turn off actions (#920)
* Add TM1651 simple level action

* fixed brightness validation

* Updated lib, fixed import

* Added turn_on, turn_off actions

* Fixed after lint
2020-02-15 20:52:20 -03:00
Héctor Giménez
2d0d794a9d Daikin climate ir component (#964)
* Daikin ARC43XXX IR remote controller support

* Format and lint fixes

* Check temperature values against allowed min/max
2020-01-22 19:38:04 -03:00
Guillermo Ruffino
990a4d4774 Display tm1637 (#946)
* add TM1637 support
2020-01-13 14:44:55 -08:00
Keith Burzinski
6a60f01753 Add transmit pioneer (#922)
* Added pioneer_protocol to support transmit_pioneer
2020-01-13 14:39:17 -08:00
Guillermo Ruffino
420c860424
fix climate-ir bad merge (#935)
* fix climate-ir bad merge

* add mitshubishi test
2019-12-31 00:20:11 -03:00
Jesse Hills
f5b7cc81d8 Add RFBridge component (#896)
* Add RFBridge component

* Fix format issues

* Rename methods

* More formatting

* Fix line length

* Apply suggestions from code review

Co-Authored-By: Otto Winter <otto@otto-winter.com>

* Check uart settings on dump

* Make receiving local to the loop

* FIx code order and schema

* Add rf_bridge to test file

* Apply suggestions from code review

Co-Authored-By: Otto Winter <otto@otto-winter.com>
2019-12-10 11:09:35 +01:00
Nick Whyte
74aca2137b Add duty cycle output component (#894)
* Add duty cycle output component

* cleanup + tests

* format

* duty_cycle -> slow_pwm

* .

* clang-format

* ESP_LOGD -> ESPLOGVV

Co-Authored-By: Otto Winter <otto@otto-winter.com>
2019-12-07 17:15:04 +01:00
Otto Winter
0698be3995
Better/stricter pin validation (#903)
* Better/stricter pin validation

* Update tests
2019-12-04 16:47:34 +01:00
Evgeny
31d964c16a Add TM1561 support (#893)
* Add TM1561 support

* Fixed after clang-tidy

* Fixed after clang-tidy

* Fixed after clang-tidy, updated lib_deps

* Fixed after clang-tidy, updated formatting

* Added actions, removed from display domain

* Protected methods naming

* float casting

* float casting
2019-12-04 13:11:53 +01:00
Nad
7f895abc24 Add support for Sensirion SPS30 Particulate Matter sensors (#891)
* Add support for Sensirion SPS30 Particulate Matter sensors

* Remove blocking of the main thread on initialization;
Improve wording on the debug messages;
Add robustness in re-initialization of reconnected or replaced sensors;

* Fix code formatting;


Co-authored-by: Nad <valordk@github>
2019-12-04 12:34:10 +01:00
Guillermo Ruffino
0f406c38eb
fix climate_ir on receive optional (#897)
* fix climate on receive optional

* add climate tests
2019-12-03 11:50:06 -03:00
Tim P
fa1adfd934 Add QMC5883L Sensor + Improvements to HMC5883L (#671)
* Add QMC5883L and Updated HMC5883L

* add tests

* changed to oversampling

* fix pylint

* fix private method

* typo fix

* fix protected method

* Clean up code and PR recomendations

* fix tests

* remote file

* fix qmc oversampling unit

* Remove hmc5883l config logging

Either the units are converted to the user values like 1x, 8x oversampling or not printed at all. Printing the machine-value of these is only confusing users.

* Changes for validate_enum

Move stuff that can be done beforehand out of the bound function, use text_type for py2/3 compatability.

* Remove unused constant

* Remove duplicate tests

* Repeat remove config print

* remove changes to test2 since bin is to large

* Add comment to HMC5583L


Co-authored-by: Timothy Purchas <timothy@TPF.local>
Co-authored-by: Otto Winter <otto@otto-winter.com>
2019-11-26 18:43:11 +01:00
KristopherMackowiak
be36eef939 fix: template cover add position action (#877)
* Update const.py

* Update __init__.py

* Update template_cover.cpp

* Update __init__.py

* Update test3.yaml

* formatting code

* formatting code 2

* removed position lambda

* Update test3.yaml

* Update __init__.py
2019-11-21 17:57:27 -03:00
John
6a0268b852 fix chip_temperature for atm90e32 component (#865)
* Added more data to atm90e32 component

* ignore

* correction

* Delete 6chan_energy_meter.yaml

* PR request changes

* repository test branch

* Update setup.py

* Update const.py

* delete test yaml

* fix chip_temperature_sensor

This was throwing an error if chip_temperature was used. It needed to be changed from temp to temperature.

* default

* Update test1.yaml
2019-11-20 17:47:34 +01:00
Mark
092bca0d63 Atm90e32 pf fix (#841)
* correct set_pf_sensor to set_power_factor_senor

* remove junk files added in error

* correct sensors.yaml reference to set_reactive_power

* Fixes
2019-11-13 08:49:59 +01:00
Alexander Leisentritt
3e8fd48dc0 implemented ruuvi_ble and ruuvitag with RAWv1 and RAWv2 protocol (#810)
* implemented ruuvi_ble and ruuvitag with RAWv1 protocol

fixes esphome/feature-requests#313

* lint

* updated data calculations

* cpp lint

* use string directly in message

Co-Authored-By: Otto Winter <otto@otto-winter.com>

* add RAWv2 protocol support

* fix ICON_SIGNAL

* typo

* calculation correction and cleaning

* c++ lint

* added acceleration and fixed typo

* removed remote_receiver to reduce firmware size

remote_receiver also in test1.yaml
2019-11-07 22:10:09 +01:00
Sergio
a919b015b4 Add support for INA226 Current/Power Monitor (#801)
* Add support for INA226 Current/Power Monitor

* fix lint errors

* fix narrowing conversion

* Remove useless code


Co-authored-by: Sergio Muñoz <sergio@iMac-de-Sergio.local>
2019-11-06 13:59:00 +01:00
DAVe3283
f94e9b6b1e Add MAX31865 sensor support, fix MAX31855 sensor (#832)
* Add MAX31865 sensor support, fix MAX31855 sensor.

# MAX31865

Added support for the MAX31865 RTD-to-Digital Converter to measure PT100 and
similar RTDs. Verified with an Adafruit unit (product ID: 3328) and a PT100
probe.

# MAX31855

This was setup for incorrect SPI clock polarity and phase, and would return bad
data due to a race condition measuring on the wrong edge (verified with Saleae
Logic scope). Selecting the correct configuration fixes that problem.

Re-wrote the decode off the datasheet to handle error states better (sends NaN
as an update on failure to read temperature, which shows the value as Unknown
in Home Assistant).

Added the *optional* ability to monitor the internal high-precision temperature
sensor, which can be nice in some applications.

* Tests for MAX31855/MAX38165.

* Update style to match project rules.

Also fix CONF_REFERENCE_RESISTANCE and CONF_REFERENCE_TEMPERATURE being defined
multiple places. Missed this when I added them to const.py.

* Update style to match project rules.

Pylint line limit 101/100 ("missed it by that much").
Also apparently I can't read and patched the wrong line in max31855.cpp.

* Minor string/style cleanup.

There was a copy-paste leftover in max31855.cpp and max31865/sensor.py had
unnecessary whitespace.

* Improve MAX31865 fault detection and logging.

Log levels are more in-line with the documented descriptions.

Fault detection code is improved. A transient fault between reads is still
reported, but now only faults *during* a read cause the sensor to fail and
return NAN ("unknown" in Home Assistant).

* Update style to match project rules.

I just now realized the .clang-format and pylintrc files are included. D'oh!

* MAX31855 & MAX31865 code style alignment.

@OttoWinter caught some style mismatches, updated to match project better.

* Fix a lost '\' in max31865/sensor.py.
2019-11-06 13:56:43 +01:00
Otto Winter
dc2279b74f
Add servo missing restore option to codegen (#829)
See also https://github.com/esphome/issues/issues/609
2019-11-02 20:56:42 +01:00