Commit graph

2178 commits

Author SHA1 Message Date
Oxan van Leeuwen
4c4099966a
Fix invalid escape sequences in regex (#1814) 2021-07-05 10:04:18 +12:00
Paul Doidge
86ac7f3a59
Time Based Cover: Fixed apparent race condition on ESP32 chips (#1984) 2021-07-05 07:39:18 +12:00
Trevor North
9e400a7857
Fix tuya fan speed send (#1978) 2021-07-04 23:47:22 +12:00
Otto Winter
d5278351da
Rename master branch to release (#1976) 2021-07-02 15:42:36 +02:00
definitio
36861595f1
Add device_class support for MQTT integration (#1832) 2021-07-01 15:36:01 +02:00
Frederik Gladhorn
d604321f37
Simplify initializing glyph_data (#1970)
Make it easier to read the initialization with zeros, no loop required.
2021-06-30 20:36:48 +02:00
bazuchan
964ab65497
Climate component for Ballu air conditioners with remote model YKR-K/002E (#1939) 2021-06-28 16:26:30 -03:00
Jesse Hills
3b940b1c04
Set is_valid to true straight away when min_length is 0 (#1960) 2021-06-25 07:09:07 +12:00
Jesse Hills
5fca480921
Bump dashboard to 20210623.0 (#1958) 2021-06-24 12:38:59 +12:00
Oxan van Leeuwen
7051f897bc
Validate color temperature values for RGBWW/CWWW lights (#1957)
Check if the color temperature of the cold white channel is colder (less) than
the warm white channel.
2021-06-24 00:07:27 +02:00
Otto Winter
2cb3015a28
Compat argv parsing improvements (#1952) 2021-06-23 20:27:08 +02:00
Otto Winter
d0859a7d33
Add climate preset NONE again (#1951) 2021-06-23 20:25:19 +02:00
Jesse Hills
61ebc629f6
Bump esphome-dashboard to 20210622.0 (#1955) 2021-06-22 22:15:11 -07:00
Stefan Agner
32f2da77f8
More VSCode devcontainer improvements (#1934) 2021-06-22 16:37:05 +02:00
Otto Winter
bfca3f242a
Disallow power_save_mode NONE if used together with BLE (#1950) 2021-06-22 10:53:10 +02:00
Stefan Agner
3dfff2930a
Improve DHT read timings (#1901)
Make sure that the initial rising edge is properly detected even if
timing is somewhat off.

Set MCU start signal to 1ms for AM2302.
2021-06-22 10:07:14 +02:00
Paulus Schoutsen
027e0de48e
Bump dashboard to 20210621.0 (#1946) 2021-06-22 16:17:46 +12:00
Otto Winter
c811141a4f
API raise minor version for climate changes (#1947) 2021-06-21 22:02:18 +02:00
Otto Winter
871c0ee2a5
Rework climate traits (#1941)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-21 21:17:01 +02:00
Jesse Hills
b8a7741c61
Update generation script to add const (#1945) 2021-06-21 21:27:35 +12:00
Jesse Hills
b6011b9353
Fix bad climate control enum (#1942) 2021-06-21 14:17:38 +12:00
Jesse Hills
40a5005d94
Allow wifi setup to proceed when there is no sta or ap (#1931) 2021-06-21 09:00:16 +12:00
Sergey V. DUDANOV
c5eba21ff6
Fix midea_ac query frame (#1940) 2021-06-21 08:59:12 +12:00
Jesse Hills
4891cfef56
Add data sizes to tuya log message (#1938) 2021-06-18 15:50:56 +12:00
Chris Nussbaum
4395664547
Don't send Tuya commands while currently receiving a message (#1886)
Co-authored-by: Chris Nussbaum <chris.nussbaum@protolabs.com>
2021-06-18 14:58:39 +12:00
Keith Burzinski
04d926af39
Add variable bit width for Samsung protocol (#1927) 2021-06-18 13:54:46 +12:00
Stefan Agner
f9a31c1abb
Fix error print in script/helpers.py (#1935) 2021-06-18 13:49:25 +12:00
Jesse Hills
dca1c0f160
Replace CLIMATE_MODE_AUTO with CLIMATE_MODE_HEAT_COOL in most cases (#1933) 2021-06-18 11:48:40 +12:00
Otto Winter
2419bc3678
Improve config final validation (#1917) 2021-06-18 07:54:14 +12:00
Sergey V. DUDANOV
c19b3ecd43
Fix: midea_ac: fixed query status frame (#1922) 2021-06-18 07:39:13 +12:00
Paulus Schoutsen
ef1e91d838
Update dashboard to 20210617.0 (#1930) 2021-06-18 07:35:54 +12:00
Barry Loong
e5929225eb
Fix typo in test3.yaml (#1928) 2021-06-17 21:39:59 +12:00
Franck Nijhof
607c3ae651
Fix update-all from dashboard (#1924) 2021-06-17 05:39:04 +12:00
Jesse Hills
5591832b50
Shorten the ble name to prevent crash with long device names (#1920) 2021-06-16 13:49:06 +12:00
Paulus Schoutsen
25b116048c
Bump dashboard to 20210615.0 (#1918) 2021-06-16 09:04:17 +12:00
Guillermo Ruffino
24ba9eba46
fixes compatibility with esphome cfg vscode (#1911) 2021-06-15 20:20:24 +12:00
Otto Winter
424c34225f
Run script/setup in devcontainer instead of pip install (#1913) 2021-06-15 20:19:21 +12:00
Paulus Schoutsen
d781f3a11b
Bump frontend to 20210614.0 (#1912) 2021-06-15 20:18:27 +12:00
Stefan Agner
a80f9ed336
Support ESP8266 Arduino 3.0.0 (#1897)
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-06-15 08:50:58 +02:00
Otto Winter
92bbedfa5a
Fix #1908 mutating input parameter 2021-06-15 08:48:18 +02:00
Jesse Hills
86710ed483
Validate that either networks, ap, or improv is set up (#1910) 2021-06-15 13:16:43 +12:00
Jesse Hills
da7eb9ac90
Allow no networks or AP to be set. (#1908)
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
2021-06-15 11:05:10 +12:00
dentra
c411043681
Adds support cpp to vscode (#1828)
Co-authored-by: Stefan Agner <stefan@agner.ch>
2021-06-15 10:45:22 +12:00
Oxan van Leeuwen
93f8ee7e60
Fix non-const global (#1907) 2021-06-15 09:12:06 +12:00
Oxan van Leeuwen
0efc1f06f2
Split files in light component (#1893) 2021-06-14 18:01:56 +02:00
Paulus Schoutsen
9ad9d64ac7
Add new wizard + allow installing firmware over webserial (#1887) 2021-06-12 10:49:05 +12:00
Jesse Hills
5a2cfa2798
Move esp32_ble_server to its own component (#1898) 2021-06-12 08:31:15 +12:00
Jesse Hills
eb24da7c82
Ensure wifi is in at least station mode before starting improv (#1899) 2021-06-11 23:28:00 +12:00
Oxan van Leeuwen
f93e261d75
Convert st7735.cpp to use Unix line separators (#1894) 2021-06-11 08:33:12 +12:00
Stefan Agner
501f88ca86
Avoid non-const globals and enable clang-tidy check (#1892) 2021-06-11 08:19:44 +12:00