Commit graph

1239 commits

Author SHA1 Message Date
Gavin Mogan
e2b655a6cc
Add huzzah gpio pins (#1096) 2020-06-19 13:02:59 -03:00
Lukas Klass
04e6f475b4
Fix decode and encode for RC5-protocol (#1047)
* Fix receive and transmit for RC5-protocol

Receive did not work as a sequence of two high or low puleses are detected as one long pulse. Transmit was extended to respect the field bit in order to enable codes up to 127.

* Fix code formatting
2020-06-18 19:50:58 -03:00
Keith Burzinski
0082c5b459
Climate bang bang enhancements (#1061)
* Add fan support to bang bang controller

* Fix heat-only and cool-only modes

* Added support for all climate actions and modes

* Fix up some comments

* Fan_only mode behavior tweak

* Updated test

* Updated test, take 2

* Add accessor methods for easier use in lambadas

* Revert "Add accessor methods for easier use in lambadas"

This reverts commit f15713129cd5587242a08ad1e2ee37cbf075aa03.

Don't code late at night when sleepy.

* Fix single/dual setpoint support

* Linted

* Properly implement single-point, validation improvements

* Another quick fix...sigh

* Update tests

* Update tests, take 2

* Revert "Update tests, take 2"

This reverts commit 71bb7fccc53d95a7d221e80ea0a931fb3cfd9a0c.

Nope.

* Revert "Update tests"

This reverts commit 42044291efaaf09858f29ab27bbc3aa9e8b80ee9.

Nope 2.

* Updated/fixed tests

* Revert "Updated/fixed tests"

This reverts commit a1a5b1c7db9a240b9da668b6e48abe1dd7910777.

Taking a different approach.

* Revert "Another quick fix...sigh"

This reverts commit 6b1955724a2de3c2d1534ec206dd5794bbb5f568.

Taking a different approach.

* Revert "Properly implement single-point, validation improvements"

This reverts commit f5bfff099e1dc58edd3898da8655c147adde2301.

Taking a different approach.

* Single/dual set point fixes, full validation

* Fix test

* Fix restore-on-boot, clean up comments

* Decouple two-point/auto operation, more polish

* One last away mode tweak

* Added set point validation

* Clean up over-publishing, always call action after boot

* Add fan support to bang bang controller

* Fix heat-only and cool-only modes

* Added support for all climate actions and modes

* Fix up some comments

* Fan_only mode behavior tweak

* Updated test

* Updated test, take 2

* Add accessor methods for easier use in lambadas

* Revert "Add accessor methods for easier use in lambadas"

This reverts commit f15713129cd5587242a08ad1e2ee37cbf075aa03.

Don't code late at night when sleepy.

* Fix single/dual setpoint support

* Linted

* Properly implement single-point, validation improvements

* Another quick fix...sigh

* Update tests

* Update tests, take 2

* Revert "Update tests, take 2"

This reverts commit 71bb7fccc53d95a7d221e80ea0a931fb3cfd9a0c.

Nope.

* Revert "Update tests"

This reverts commit 42044291efaaf09858f29ab27bbc3aa9e8b80ee9.

Nope 2.

* Updated/fixed tests

* Revert "Updated/fixed tests"

This reverts commit a1a5b1c7db9a240b9da668b6e48abe1dd7910777.

Taking a different approach.

* Revert "Another quick fix...sigh"

This reverts commit 6b1955724a2de3c2d1534ec206dd5794bbb5f568.

Taking a different approach.

* Revert "Properly implement single-point, validation improvements"

This reverts commit f5bfff099e1dc58edd3898da8655c147adde2301.

Taking a different approach.

* Single/dual set point fixes, full validation

* Fix test

* Fix restore-on-boot, clean up comments

* Decouple two-point/auto operation, more polish

* One last away mode tweak

* Added set point validation

* Clean up over-publishing, always call action after boot

* Added refresh() function to allow easy on-device state refreshing
2020-06-17 20:16:42 -03:00
MasterTim17
3fd130869e
fix for ESP32 'Association Leave' (#1081) 2020-06-15 21:52:47 -03:00
korellas
d000440927
sgp30 baseline write bug (#1157) (#1078) 2020-06-15 00:41:17 -03:00
rnauber
4fb750de43
ADE7953: Fix dereferencing of a null pointer (#1086)
* ADE7953: Fix dereferencing of a null pointer

The ade7953 driver dereferences a null pointer, when not all of
its sensors are used. This gives an exception like:

Fatal exception:29 flag:2 (EXCEPTION) epc1:0x4020c241 epc2:0x00000000 epc3:0x00000000 excvaddr:0x00000018 depc:0x00000000

* Fix formatting

Co-authored-by: olg <x>
2020-06-15 00:37:15 -03:00
SenexCrenshaw
9632ac0e02
Add MCP3008 I/O Expander (#1057)
* Add MCP3008

* Fixed Travis build issues

* Travis Build Fix

* Fix Travis foramt issues

* Travis fixes

* Code review changes

* Fix bit shift. off by one and selecting wrong pin

* general fixes

* lint

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-06-14 22:42:46 -03:00
Jeff Rescignano
35078fd52f
Add API component to logging error message (#1062)
* Add API component to logging error message

* lint

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-06-14 22:41:02 -03:00
Jim Persson
0bb81e5b2d
Add support for controlling fan direction (#1051)
* Fix fan oscillation trait not being used

* Add fan direction support to SpeedFan

* Add fan direction to API

* Add fan direction support to BinaryFan

* Fix CI errors

* Fix python format

* Change some ordering to trigger CI

* Add test for the configuration
2020-06-14 16:54:31 -03:00
Christian Ferbar
35a2258f12
SenseAir: flush input buffer on read error (#1017)
* SenseAir: flush input buffer on read error

* SenseAir: flush input buffer on read error - fix typo

* SenseAir: flush input buffer on read error - fix formating

* SenseAir: flush input buffer on read error - fix formating2

* SenseAir: flush input buffer on read error - fix formating3

* SenseAir: flush input buffer on read error - fix formating4

* Update esphome/components/senseair/senseair.cpp

* Update esphome/components/senseair/senseair.cpp

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-06-13 20:26:41 -03:00
Niklas Wagner
b650704877
Update docker base image (#1093)
* Upgrade docker base image to 2.1.0

* Upgrade docker base image to 2.1.1

Co-authored-by: Otto Winter <otto@otto-winter.com>
2020-06-13 19:51:43 -03:00
Kamil Trzciński
0c0dec2534
Add WLED support (#1092)
A component to support [WLED](https://github.com/Aircoookie/WLED/wiki/UDP-Realtime-Control).
This allows to control addressable LEDs over WiFi/UDP, by pushing data right into LEDs.

The most useful to use [Prismatik](https://github.com/psieg/Lightpack) to create
an immersive effect on PC.

It supports all WLED protocols:
- WARLS
- DRGB
- DRGBW
- DNRGB
- WLED Notifier

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-06-12 20:50:09 -03:00
Kamil Trzciński
d1b051a6bd
Add Adalight support (#956)
A component to support [Adalight](https://learn.adafruit.com/adalight-diy-ambient-tv-lighting).
This allows to control addressable LEDs over UART, by pushing data right into LEDs.

The most useful to use [Prismatik](https://github.com/psieg/Lightpack) to create
an immersive effect on PC.

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-06-12 20:34:38 -03:00
Kamil Trzciński
27204aa53c
Add E1.31 support (#950)
This adds a `e131` component that allows
to register `e131` addressable light effect.

This uses an internal implementation that
is thread-safe instead of using external libraries.
2020-06-12 20:17:13 -03:00
Niklas Wagner
8aedac81a5
RGBWW/CCT Lights: Fix gamma_correct when using constant_brightness (#1043) 2020-06-12 15:17:46 -03:00
Evgeny
42007d03d4
AQI calculator for HM3301 (#1011)
* HM3301 AQI calculator

* remove logs

* fixed after lint

* fixed after lint

* fixed after lint

* check NP for AQI sensor

* validation for AQI sensor
2020-06-11 23:14:54 -03:00
igg
821c1a8bbd
making SPI CS optional (#988)
* making SPI CS optional

* CS pin should be declared as optional or required in CONFIG_SCHEMA

* changed SPI_DEVICE_SCHEMA to a function, like i2c

* added spi_device_schema() to pcd8544, lint fixes

* updated max31856 with new spi_device_schema()

* cleanup imports

Co-authored-by: Ilya Goldberg <iggie@mac.com>
2020-06-10 17:03:11 -03:00
Adriaan Peeters
bab562dc3a
Turn off PN532 RF field when not expecting a tag (#1046)
* Turn off PN532 RF field when not expecting a tag

Avoids interference with Wifi connectivity of nearby devices.

* Rename turn_off_rf_ method

* documented off command bytes

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-06-09 23:23:25 -03:00
Marvin Gaube
f63fd9696f
Add Webserver Prometheus support for sensor, binary sensor, fan, light, cover and switch (#1032) 2020-06-09 22:00:12 -03:00
Kamil Trzciński
cd7af19e7c
Extend uart: with rx_buffer_size: (#1006)
* Extend `uart:` with `rx_buffer_size:`

This allows to configure `rx_buffer_size:`
to efficiently receive big payloads over UART

* lint

* remove old default value

* add test

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-06-09 21:22:06 -03:00
Ivan Shvedunov
64bd33a94e
Sort keys in dicts in output yaml for 'config' command (#1049)
Having different output each time due to random key order makes some
tasks harder (such as CI scripts).
2020-06-09 00:10:49 -03:00
rradar
d1f4c2ab57
BH1750 Measurement time (#997)
* BH1750 Measurement time

Fixes https://github.com/esphome/feature-requests/issues/148

* lint

* add test

Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-05-28 23:10:34 -03:00
Adrian Cuzman
7e4d12f880
added energy reading for pzem004 (#1022) 2020-05-28 19:54:00 -03:00
igg
ecd65003d4
Added support for ssd1327 (#985)
Co-authored-by: Ilya Goldberg <iggie@mac.com>
2020-05-28 19:11:25 -03:00
gitolicious
fed37b48a1
Explicitly set language to English (#1073) 2020-05-26 19:47:35 -03:00
Alexander Pohl
3fba3a5e2e
Add support for additional Xiaomi BLE sensors (#1027) (#1027) 2020-05-26 19:33:28 -03:00
Guillermo Ruffino
9e7e8ab116 format 2020-05-24 23:45:15 -03:00
Guillermo Ruffino
1bec1faf6d lint 2020-05-24 23:27:28 -03:00
declanshanaghy
e64246f642
Adding support for MAX31856 Thermocouple Temperature Sensor (feature #700) (#1039) 2020-05-24 19:33:59 -03:00
0hax
fb2b7ade41
Uart improvments (#1024)
* uart: Add support for specifying the number of bits and parity.

ESP8266SwSerial doesn't really check parity but just read the parity bit
and ignore it when receiving data.

Signed-off-by: 0hax <0hax@protonmail.com>

* uart: support begin and end methods.

A component may need to reset uart buffer/status by using begin() and
end() methods. This is useful for example when a component needs to be
sure it is not reading garbage from previously received data over uart.
For end() methods with software serial, disabling interrupt is
currently impossible because of a bug in esp8266 Core:
https://github.com/esp8266/Arduino/issues/6049

Signed-off-by: 0hax <0hax@protonmail.com>

* esphal: add support for detaching an interrupt.

That's needed when a component needs to enable/disable interrupt on a
gpio.

Signed-off-by: 0hax <0hax@protonmail.com>

* uart: rename CONF_NR_BITS to CONF_DATA_BITS_NUMBER.

Signed-off-by: 0hax <0hax@protonmail.com>

* uart: use static const uint32_t instead of #define.

Signed-off-by: 0hax <0hax@protonmail.com>

* uart: use an enum to handle parity.

Signed-off-by: 0hax <0hax@protonmail.com>

* uart: split between esp32 and esp8266.

Signed-off-by: 0hax <0hax@protonmail.com>

* uart: check_uart_settings for parity and number of data bits.

Signed-off-by: 0hax <0hax@protonmail.com>

* name param data_bits

* add new params to test

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-05-24 18:59:07 -03:00
Oskar Napieraj
4de44a99eb
Add support for ESP32 DAC (#1071)
* Add support for ESP32 onboard DAC

* Newlines

* Tests
2020-05-24 00:06:55 -03:00
Chris Talkington
39fbf9c56f
expose mac address via discovery (#1038) 2020-05-23 22:53:15 -03:00
krahabb
021055f0b8
Added auto discovery and setup to Dallas Platform (#1028)
* Added auto discovery and setup to Dallas Platform

* Added auto discovery and setup to Dallas Platform

* Added auto discovery and setup to Dallas Platform

* Added auto discovery and setup to Dallas Platform

* Added auto discovery and setup to Dallas Platform
2020-05-23 21:52:29 -03:00
Niklas Wagner
c2e0ea97d8
Upgrade dependencies 2020-05-23 20:33:58 -03:00
Jozef Zuzelka
153aadadae
Ble scanner (#976)
* Added ble_scanner component

* ble_scanner: time.h changed to ctime

* ble_scanner: Test added.

* ble_scanner: fixed code formatting.

* Removed duplicate binary sensor tests from test2 and test3 to decrease memory requirements.

* Removed another duplicate test from test2.yaml and moved stepper test to yaml3.yaml to reduce memory requirements of test2.yaml.

* Reverted the last stepper test change

* Moved some sensor tests from test2.yaml to test3.yaml to save memory.

* Moved ruuvitag back to test2.yaml as it requires component esp32_ble_tracker.

* removed apds9960 as it is duplicated

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-05-19 21:13:50 -03:00
Jesse Hills
1319ff1129
Add lambda to devcontainer config (#1059) 2020-05-19 21:02:10 -03:00
Robin Smidsrød
7df72ddb96
dht: Fix sensor reading from DHT22 (#926)
* dht: Fix sensor reading from DHT22 (#239)

Looking at the datasheet for DHT22, it claims to need a delay of 18ms, not
800us. Change to use the same delay as DHT11. Tested working with NodeMCUv3
and DHT22 sensor with board with built-in resistor.

* dht: Add model DHT22_TYPE2 with 2ms delay instead of 0.8ms

The model DHT22_TYPE2 is exactly the same as DHT22, but uses a different
delay.

* dht: Fix bogus negative temperature reading on DHT22_TYPE2

The workaround for negative numbers associated with DHT22s can be skipped
on these sensors.
2020-05-18 20:24:13 -03:00
nepozs
1d9ce2afc5
Update tm1637.cpp (#1044)
* Update tm1637.cpp

Defined degree symbol.

* remove fixed array size

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-05-18 20:10:03 -03:00
Jim Persson
53986279d7
Fix fan oscillation trait not being used (#1048) 2020-05-18 19:14:20 -03:00
Jesse Hills
26d6738abb
Allow tm1637 to use pins from IO expanders (#1058)
* Allow tm1637 to use pins from IO expanders

* Add test for io expander pins
2020-05-18 19:13:29 -03:00
sredfern
7fa5cab8e3
Extending Support to 5.83in Waveshare eink B/W displays (#1009)
* Extending Support to 5.83in Waveshare eink B/W displays

* Fixed lint issues
2020-05-01 21:30:52 -03:00
buxtronix
4f2e2fa297
Some max7219 updates. (#1021)
* Some max7219 updates. Disable test mode on startup and allow dynamic brightness

* fix formatting
2020-05-01 20:05:09 -03:00
Team Super Panda
0473c4c79f
Update __init__.py (#1020) 2020-05-01 18:53:41 -03:00
Andrew Zaborowski
a62b6548d2 Make some Action methods protected
Apparently play()/stop() etc. are not meant to be called directly by
users of the class and if they're called directly that would not give
the expected result for the classes that have an empty play().

Make all methods except play_complex, stop_comples and is_running
protected.  While there also make RemoteTransmitterActionBase::encode
protected.
2020-05-01 12:44:30 +02:00
Andrew Zaborowski
da390d32f8 Move stop/is_running implementation to Action base class
Try to fix issue #1105.  Until now if an UpdateComponentAction, a
LambdaAction, or any action that can contain those inside their
"else" or "then" action lists, resulted in a call to script.stop on
the script that contains them, the script would continue running,
because they didn't implement a stop() method.  Basically only
the asynchronous ones did: DelayAction, WaitUntilAction and
ScriptWaitAction.

With this change num_running_ in Action replaces
DelayAction::num_running_ and WaitUntilAction::triggered_ to provide
the same is_running logic to other actions.
2020-05-01 12:44:30 +02:00
Nikolay Vasilchuk
8b92456ded
http_request ESP32 insecure requests fix (#1041)
* Fixed #1175

* CI

Co-authored-by: Nikolay Vasilchuk <nikolay.vasilchuk@corp.mail.ru>
2020-04-30 23:05:11 -03:00
Guillermo Ruffino
14e9375262
test disable no delay (#1026)
* test disable no delay

* removed set_nodelay code
2020-04-30 23:00:57 -03:00
puuu
d49ee47018
esp32 remote: make RMT memory blocks configureable (#1002) 2020-04-30 22:59:51 -03:00
Jonathan Adams
af66753c1b
Dashboard Updates (#1025)
* Restructuring of static files directory

* Update jQuery to v3.5.0

* Update jQuery UI to v1.12.1

* Update jQuery Validate to v1.19.1

* Improve login page layout and color scheme

* Updated header & footer colour scheme & added ESPHome logo

* Restructuring of fonts directory

* Restructuring of fonts directory

* Corrected icon reference error

* Update node layout and styling

* Update Ace to v1.4.10

* JS file reorganisation

* Rewrite of LogModal class including refactorization of js & html

* Updated delete node function

* Rewrite of editor modal

* Update Materialize Stepper to v3.1.0

* Updates to the wizard modal

* Added wizard validators back in and removed comments

* Merge old stylesheet into new

* Linting errors

* Fixed dashboard layout issue when no nodes present

* Introduced dynamic 3 column layout for large screens

* Removed unnecessary code

* Update data attribute names

* Added loading indicator to editor

* Open validator websocket on document ready

* Automatically restart validator websocket if it closes

* Minor styling updates

* Improvements to on boarding process

* Node display filename and then path on hover

* Removing console.logs

* Minor styling revisions

* Added toast on begin

* Fix lint

Co-authored-by: Sergio Mayoral Martinez <sergiomayoralmartinez@gmail.com>
2020-04-29 10:04:05 -03:00
Niklas Wagner
39b35b79ba
Make initial run variable available to addressable_lambda (#1035)
* Make initial run variable available to addressable_lambda

* Fix linting

* Remove if clause
2020-04-28 19:24:06 -03:00