Oxan van Leeuwen
5c339d4597
Convert clamp() helper to backport of std::clamp() ( #3010 )
2022-01-07 00:56:10 +13:00
Oxan van Leeuwen
a4931f5d78
Clean-up reverse_bits helpers ( #3011 )
2022-01-07 00:54:58 +13:00
Martin
5e1e543b06
Add support for BMP388 / BMP 390 pressure and temperature sensor ( #2716 )
2022-01-06 15:01:50 +13:00
Pavel Skuratovich
df929f9445
Fix SlowPWM output switch at the end of period ( #2984 )
2022-01-05 21:31:11 +01:00
Oxan van Leeuwen
d8e719d1c4
Support clang-tidy for ESP32 variants ( #3001 )
2022-01-05 21:30:15 +01:00
mknjc
3067e482fc
atc mithermometer: Add possibility to report signal strength ( #3000 )
2022-01-05 16:43:37 +13:00
Martin
ed5930e934
SGP40 - Reduce delay in measurement ( #2996 )
2022-01-05 10:05:19 +13:00
Oxan van Leeuwen
ffea3597f4
Set correct include_dir in platformio.ini ( #2999 )
2022-01-04 21:59:34 +01:00
Oxan van Leeuwen
193d3e0206
Fix clang-tidy with multiple ESP32 toolchains installed ( #2998 )
2022-01-05 08:34:17 +13:00
Gonzalo Paniagua Javier
c8f4fbb7dd
Honor user set values for col/row start for INITR_MINI_160X80. ( #2976 )
...
If the caller sets a value for colstart and/or rowstart when using the INITR_MINI_160X80 model, use those values instead of the default 24 and 0.
After this patch devices with a 160x80 TFT like the m5stick C can set row/col start (26, 1 for m5stick) and avoid garbage lines showing in the display.
2022-01-04 11:02:53 +01:00
Snōwball
c855bc31b4
Add bl0940 component used by e.g. tuya devices ( #1904 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-04 10:38:58 +01:00
Martin
b924b179ab
Modbus: add binary output ( #2931 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-04 10:19:18 +01:00
Jesse Hills
3df0fee3de
Dont validate baud_rate for sim800l platform ( #2945 )
2022-01-04 10:16:40 +01:00
Jesse Hills
b601560e81
Apply --no-use-pep517 for docker images ( #2985 )
2022-01-04 10:16:02 +01:00
Oxan van Leeuwen
e5775cf812
Introduce bit_cast() backport ( #2991 )
2022-01-04 10:14:57 +01:00
Igor Scheller
26dd1f8532
Set UTF-8 encoding and version for prometheus /metrics ( #2993 )
2022-01-04 10:14:38 +01:00
Oxan van Leeuwen
5143a5b5c5
Use to_string() from STL when available ( #2992 )
2022-01-03 23:30:03 +01:00
Stefan Agner
15ce27992e
Support ISR based pulse counter on ESP32-C3 ( #2983 )
2022-01-04 11:06:43 +13:00
Oxan van Leeuwen
dbc2812022
Improve PSRAM support ( #2884 )
2022-01-04 10:35:15 +13:00
Martin
dce3713f12
Fix HTTPRequestComponent::get_string return value ( #2987 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-03 19:40:05 +01:00
Christopher Masto
f849d45bb6
Add logging for some Nextion errors that didn't have any ( #2957 )
2022-01-03 19:09:25 +01:00
arunderwood
8ad06fb9ea
Add SH1107_128x64 to the ssd1306 component ( #2967 )
2022-01-03 19:08:16 +01:00
David Buezas
9124d9d6e6
Change unset ESPHOME_LOG_LEVEL fallback to NONE ( #2982 )
...
Co-authored-by: David Buezas <david.buezas@klarna.com>
2022-01-03 18:58:35 +01:00
Martin
45ebe51e4f
Modbus: fix response parsing error for coil write ( #2986 )
2022-01-03 18:28:28 +01:00
Martin
407661d56b
Fix compile error for idf projects with ArduinoJson 6 ( #2979 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-03 18:19:01 +01:00
Paulus Schoutsen
998d4229af
Use template path ( #2961 )
2022-01-03 08:57:09 -08:00
Stefan Agner
a02d2e2e11
Explicitly use overloaded begin() for I2C master initialization ( #2978 )
...
Arduino 2.0.1 and newer support slave and master mode. The two modes
have a begin() method with different signature:
```
// Slave Begin
bool TwoWire::begin(uint8_t addr, int sdaPin, int sclPin, uint32_t frequency)
// Master Begin
bool TwoWire::begin(int sdaPin, int sclPin, uint32_t frequency)
```
Use type casting to make sure that overloaded method for master mode
is used.
2022-01-03 16:37:21 +01:00
Stefan Agner
72fa68849f
Don't use pyproject.toml for esphome build ( #2980 )
2022-01-03 22:11:28 +13:00
Jesse Hills
33f17f75a0
Upgrade ArduinoJson to 6.18.5 and migrate code ( #2844 )
2022-01-01 22:31:43 +13:00
MrEditor97
23edb18d7e
INA260 Current and Power Sensor support ( #2788 )
2021-12-31 22:08:49 +13:00
arunderwood
07ff3a853f
Add pin aliases for featheresp32-s2 ( #2970 )
2021-12-31 20:11:28 +13:00
Sebastian Raff
2cf36bdb46
Fix switch log state if inverted ( #2960 )
2021-12-30 16:05:31 +13:00
Jesse Hills
f859b346a6
Remove -e for hassio images ( #2964 )
2021-12-30 10:42:22 +13:00
marsjan155
cb0677cafe
ST7920 ESP32 fix ( #2962 )
...
Co-authored-by: Marcin Depa <m.depa91@gmail.com>
2021-12-30 10:34:30 +13:00
Daniel Hyles
c6956527d1
Remove Content-Length header from camera snapshot response ( #2860 )
...
* Update camera_web_server.cpp
Removed the duplicated CONTENT_LENGTH header
* Update camera_web_server.cpp
* Update camera_web_server.cpp
2021-12-28 09:32:17 +13:00
Jesse Hills
72c6bfaa50
Revert "Disable nightly dev build" ( #2944 )
2021-12-23 09:38:43 +13:00
Jesse Hills
7927b5f624
Workaround installing as editable package not working ( #2936 )
2021-12-23 08:43:17 +13:00
Jesse Hills
b7aad39daf
Only allow internal pins for dht sensor ( #2940 )
2021-12-23 08:31:56 +13:00
Jesse Hills
f48de6dd43
Disable nightly dev build ( #2943 )
2021-12-22 23:02:58 +13:00
Jesse Hills
79d73d8f8b
Add option to load docker image when building ( #2938 )
2021-12-22 20:49:04 +13:00
Jesse Hills
cc5947467f
Require arduino in webserver for better validation ( #2941 )
2021-12-22 20:08:54 +13:00
George
e152f128c8
Change HDC1080 init instruction failure from error to warning ( #2927 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-12-22 15:35:01 +13:00
Jesse Hills
99bd808ebe
Update curl package version in docker ( #2939 )
2021-12-22 15:27:34 +13:00
Jan Čermák
beb5f3dc9d
bang_bang: respect set cool- and heat-only modes ( #2926 )
2021-12-22 15:27:16 +13:00
Jesse Hills
f5c3b3446f
Support inkplate10 ( #2937 )
2021-12-22 12:56:52 +13:00
jsuanet
f431c7402f
Add shutdown and safe_mode button ( #2918 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Jos Suanet <jos@suanet.net>
2021-12-20 22:25:36 +01:00
Oxan van Leeuwen
4907e6f6d7
Fix MQTT button press action ( #2917 )
2021-12-21 08:19:20 +13:00
Jonas De Kegel
1ccee86705
Fix tm1637 bootloop ( #2929 )
2021-12-20 18:06:04 +01:00
Jonas De Kegel
542fb2175b
Support inverted tm1637 display ( #2878 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-12-20 09:30:35 +01:00
Frank Langtind
6ec9cfb044
Add Tuya Number support ( #2765 )
2021-12-20 14:35:10 +13:00
