definitio
36861595f1
Add device_class support for MQTT integration ( #1832 )
2021-07-01 15:36:01 +02:00
Frederik Gladhorn
d604321f37
Simplify initializing glyph_data ( #1970 )
...
Make it easier to read the initialization with zeros, no loop required.
2021-06-30 20:36:48 +02:00
bazuchan
964ab65497
Climate component for Ballu air conditioners with remote model YKR-K/002E ( #1939 )
2021-06-28 16:26:30 -03:00
Jesse Hills
3b940b1c04
Set is_valid to true straight away when min_length is 0 ( #1960 )
2021-06-25 07:09:07 +12:00
Otto Winter
1d8c170f48
Add climate preset NONE again ( #1951 )
2021-06-24 12:49:45 +12:00
Otto Winter
6009c7edb4
Disallow power_save_mode NONE if used together with BLE ( #1950 )
2021-06-24 12:49:44 +12:00
Otto Winter
e3f36c033e
API raise minor version for climate changes ( #1947 )
2021-06-24 12:49:44 +12:00
Otto Winter
d4eb0f1655
Rework climate traits ( #1941 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-24 12:49:36 +12:00
Oxan van Leeuwen
7051f897bc
Validate color temperature values for RGBWW/CWWW lights ( #1957 )
...
Check if the color temperature of the cold white channel is colder (less) than
the warm white channel.
2021-06-24 00:07:27 +02:00
Otto Winter
d0859a7d33
Add climate preset NONE again ( #1951 )
2021-06-23 20:25:19 +02:00
Otto Winter
bfca3f242a
Disallow power_save_mode NONE if used together with BLE ( #1950 )
2021-06-22 10:53:10 +02:00
Stefan Agner
3dfff2930a
Improve DHT read timings ( #1901 )
...
Make sure that the initial rising edge is properly detected even if
timing is somewhat off.
Set MCU start signal to 1ms for AM2302.
2021-06-22 10:07:14 +02:00
Otto Winter
c811141a4f
API raise minor version for climate changes ( #1947 )
2021-06-21 22:02:18 +02:00
Otto Winter
871c0ee2a5
Rework climate traits ( #1941 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-21 21:17:01 +02:00
Jesse Hills
969834e037
Fix bad climate control enum ( #1942 )
2021-06-21 14:40:05 +12:00
Jesse Hills
d73a44c504
Allow wifi setup to proceed when there is no sta or ap ( #1931 )
2021-06-21 14:40:05 +12:00
Sergey V. DUDANOV
8aec092ab6
Fix midea_ac query frame ( #1940 )
2021-06-21 14:40:05 +12:00
Chris Nussbaum
4fa959ba45
Don't send Tuya commands while currently receiving a message ( #1886 )
...
Co-authored-by: Chris Nussbaum <chris.nussbaum@protolabs.com>
2021-06-21 14:40:05 +12:00
Jesse Hills
b6011b9353
Fix bad climate control enum ( #1942 )
2021-06-21 14:17:38 +12:00
Jesse Hills
40a5005d94
Allow wifi setup to proceed when there is no sta or ap ( #1931 )
2021-06-21 09:00:16 +12:00
Sergey V. DUDANOV
c5eba21ff6
Fix midea_ac query frame ( #1940 )
2021-06-21 08:59:12 +12:00
Jesse Hills
4891cfef56
Add data sizes to tuya log message ( #1938 )
2021-06-18 15:50:56 +12:00
Chris Nussbaum
4395664547
Don't send Tuya commands while currently receiving a message ( #1886 )
...
Co-authored-by: Chris Nussbaum <chris.nussbaum@protolabs.com>
2021-06-18 14:58:39 +12:00
Keith Burzinski
04d926af39
Add variable bit width for Samsung protocol ( #1927 )
2021-06-18 13:54:46 +12:00
Jesse Hills
dd875e7529
Replace CLIMATE_MODE_AUTO with CLIMATE_MODE_HEAT_COOL in most cases ( #1933 )
2021-06-18 11:52:02 +12:00
Otto Winter
f1dcf0f0b8
Improve config final validation ( #1917 )
2021-06-18 11:52:02 +12:00
Sergey V. DUDANOV
a045d001bf
Fix: midea_ac: fixed query status frame ( #1922 )
2021-06-18 11:52:01 +12:00
Jesse Hills
dca1c0f160
Replace CLIMATE_MODE_AUTO with CLIMATE_MODE_HEAT_COOL in most cases ( #1933 )
2021-06-18 11:48:40 +12:00
Otto Winter
2419bc3678
Improve config final validation ( #1917 )
2021-06-18 07:54:14 +12:00
Sergey V. DUDANOV
c19b3ecd43
Fix: midea_ac: fixed query status frame ( #1922 )
2021-06-18 07:39:13 +12:00
Jesse Hills
a5383fd208
Shorten the ble name to prevent crash with long device names ( #1920 )
2021-06-16 13:51:31 +12:00
Jesse Hills
5591832b50
Shorten the ble name to prevent crash with long device names ( #1920 )
2021-06-16 13:49:06 +12:00
Jesse Hills
106f0d611f
Validate that either networks, ap, or improv is set up ( #1910 )
2021-06-15 20:26:52 +12:00
Jesse Hills
d826416684
Allow no networks or AP to be set. ( #1908 )
...
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
2021-06-15 20:26:52 +12:00
Stefan Agner
a80f9ed336
Support ESP8266 Arduino 3.0.0 ( #1897 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-06-15 08:50:58 +02:00
Otto Winter
92bbedfa5a
Fix #1908 mutating input parameter
2021-06-15 08:48:18 +02:00
Jesse Hills
86710ed483
Validate that either networks, ap, or improv is set up ( #1910 )
2021-06-15 13:16:43 +12:00
Jesse Hills
da7eb9ac90
Allow no networks or AP to be set. ( #1908 )
...
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
2021-06-15 11:05:10 +12:00
Oxan van Leeuwen
93f8ee7e60
Fix non-const global ( #1907 )
2021-06-15 09:12:06 +12:00
Oxan van Leeuwen
0efc1f06f2
Split files in light component ( #1893 )
2021-06-14 18:01:56 +02:00
Jesse Hills
75b524ddc4
Fix formatting from cherry-pick conflict
2021-06-12 11:07:58 +12:00
Jesse Hills
575badc690
Move esp32_ble_server to its own component ( #1898 )
2021-06-12 11:02:59 +12:00
Jesse Hills
4b91cfb7f9
Ensure wifi is in at least station mode before starting improv ( #1899 )
2021-06-12 11:01:54 +12:00
Jesse Hills
5a2cfa2798
Move esp32_ble_server to its own component ( #1898 )
2021-06-12 08:31:15 +12:00
Jesse Hills
eb24da7c82
Ensure wifi is in at least station mode before starting improv ( #1899 )
2021-06-11 23:28:00 +12:00
Oxan van Leeuwen
f93e261d75
Convert st7735.cpp to use Unix line separators ( #1894 )
2021-06-11 08:33:12 +12:00
Stefan Agner
501f88ca86
Avoid non-const globals and enable clang-tidy check ( #1892 )
2021-06-11 08:19:44 +12:00
Otto Winter
360effcb72
Activate some clang-tidy checks ( #1884 )
2021-06-10 13:04:40 +02:00
Otto Winter
eb9bd69405
Configure clang-format for consistent pointer alignment ( #1890 )
2021-06-10 12:55:20 +02:00
Geoff Davis
8b737aabd9
Add support for waveshare_epaper 1.54v2 ( #1843 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-10 17:17:52 +12:00
Jesse Hills
0db4815f3d
BLE loop use ( #1882 )
2021-06-10 17:17:52 +12:00
Oxan van Leeuwen
139db58a66
Simplify LightCall validation ( #1874 )
2021-06-10 17:17:52 +12:00
Geoff Davis
d23376b81e
Add support for waveshare_epaper 1.54v2 ( #1843 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-10 14:05:27 +12:00
Jesse Hills
99d90845b5
BLE loop use ( #1882 )
2021-06-10 14:04:39 +12:00
Oxan van Leeuwen
ea0127e42b
Simplify LightCall validation ( #1874 )
2021-06-09 17:01:05 +02:00
René Klomp
635916737b
Update total_pulses_ at every detected pulse ( #1875 )
2021-06-09 16:48:51 +12:00
Jesse Hills
5cf18235e3
Allow setting creator project name and version into code ( #1872 )
2021-06-09 13:04:00 +12:00
Stefan Agner
b80f3fdec9
Fix Clang 11 finds ( #1880 )
2021-06-09 08:47:43 +12:00
Jesse Hills
0426be9280
Fixes for BLE/improv ( #1878 )
2021-06-09 08:45:51 +12:00
Stefan Agner
13fe9e83fa
Use Clang 11 ( #1846 )
2021-06-08 22:16:17 +02:00
Jesse Hills
a70a205ace
Improv - BLE WiFi provisioning ( #1807 )
...
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
2021-06-08 11:56:21 +12:00
Stefan Agner
18a8c727fa
Fix SCD30 configuration on ESP32 ( #1830 )
2021-06-05 20:56:54 +12:00
Stefan Agner
80ad784a4e
Avoid unnecessary waits to stabilize the VOC algorithm ( #1834 )
2021-06-05 20:52:16 +12:00
Lumpusz
ebadaa9660
Add preset, custom_preset and custom_fan_mode support to climate ( #1471 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-04 22:04:54 +12:00
Samuel Sieb
7bc51582f0
make crc16 function accessible ( #1857 )
2021-06-03 16:13:42 +12:00
Franck Nijhof
11fb54c74e
Add support for Sensor state class ( #1835 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-03 13:49:56 +12:00
Stefan Rado
913ac8b7e8
Support raw datapoints for tuya components ( #1669 )
2021-06-03 13:10:29 +12:00
foxsam21
2b9350ce76
Added vol +/- control to dfplayer ( #1856 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-03 10:12:23 +12:00
Trevor North
c5c24c1989
Tuya improvements ( #1491 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-02 21:31:56 +12:00
Ryan Mounce
c3938d04f3
Support Tuya light color temperature control ( #1412 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-02 09:32:16 +12:00
David Kiliani
f968713be8
Add optional lambda to BLESensor for raw data parsing ( #1851 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-01 21:46:54 +12:00
Jesse Hills
7b11284008
Fix ble client esp_gatt_if comparison ( #1852 )
2021-06-01 21:12:41 +12:00
zaluthar
f39c0d52ee
Added support for Xiaomi CGDK2 ( #1451 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-01 20:26:38 +12:00
buxtronix
a3756a9600
Copy missing BLE client characteristic read data ( #1818 )
...
Co-authored-by: Ben Buxton <bb@cactii.net>
2021-06-01 19:56:05 +12:00
0hax
afa436fe8f
teleinfo: use text_sensor and sensor. ( #1403 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-06-01 13:32:09 +12:00
Roberto Wagner
48b5ea9e59
Update fingerprint count after enroll ( #1811 )
2021-06-01 12:22:09 +12:00
Maurice Makaay
56974153f1
I2c raw cmds with multiplexer ( #1817 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-06-01 10:36:25 +12:00
Jesse Hills
9a2cd71571
Don't check uart settings for modbus ( #1850 )
2021-06-01 09:57:03 +12:00
Stefan Agner
d1c6368283
Use built-in validation for altitude ( #1831 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-01 07:40:57 +12:00
Adrián Panella
5c3268b8d4
Rf Bridge: add bucket sniffing and beep functionality ( #1819 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-01 07:24:22 +12:00
Oxan van Leeuwen
25af5ab7c6
Drop 128x160 ESP-32 camera resolution ( #1813 )
2021-05-31 22:27:41 +12:00
Andrew Zaborowski
4d586b1446
Add CS5460A power-meter component ( #1474 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-31 16:07:33 +12:00
polyfaces
bb759d52c8
Add support for SDMXXX energy meters ( #1260 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-31 16:05:49 +12:00
testbughub
9a2cf05c5f
Added bottom segment to digit 9 ( #1847 )
2021-05-30 20:54:26 -03:00
Guillermo Ruffino
c79d700d03
Add validate to components ( #1631 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-31 10:06:45 +12:00
Guillermo Ruffino
387f249363
fix dallas pin validation ( #1692 )
2021-05-28 13:15:52 +12:00
Otto Winter
e3c27a483c
Update sensor device classes from HA ( #1825 )
2021-05-24 21:45:51 +02:00
Otto Winter
a33bb32874
Convert components to async-def syntax ( #1823 )
...
* Convert components to async-def syntax
* Remove stray @coroutine
* Manual part
* Convert complexer components code to async-def
* Manual cleanup
* More manual cleanup
2021-05-24 21:45:31 +02:00
Otto Winter
2376a2c941
Convert components to async-def syntax ( #1821 )
2021-05-24 10:58:29 +02:00
Jim Bauwens
b11d5f6799
Allow segments in a light partition to be reversed ( #1484 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-24 08:57:48 +12:00
Stanislav Meduna
072dce340e
Add the on_page_change display trigger ( #1687 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-24 08:56:04 +12:00
Trevor North
cccb1a2c9e
BME680 BSEC: Allow sample rate overrides for T/P/H sensors ( #1710 )
2021-05-24 08:27:19 +12:00
Stanislav Meduna
063d9c47a4
Refactor font creation to save stack ( #1707 )
2021-05-24 08:24:54 +12:00
Franck Nijhof
0ce57e5a39
Light & Switch Inverted Restore mode ( #1810 )
2021-05-24 08:20:11 +12:00
Otto Winter
aebad04c0b
Convert core components to async-def coroutine syntax ( #1658 )
...
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-23 22:10:30 +02:00
Anthony Uk
514d11d46f
tm1637 - support 6 character displays ( #1803 )
2021-05-21 20:04:25 -03:00
Anthony Uk
96e46db272
Added fan triggers on_turn_on and on_turn_off ( #1726 )
2021-05-19 16:12:43 +12:00
Stefan Agner
76f78877f6
Use latest version of the NeoPixelBus-esphome library ( #1701 )
2021-05-19 14:55:49 +12:00
Jesse Hills
4ffa68b773
Merge branch 'master' into dev
2021-05-19 14:02:04 +12:00
André Klitzing
dce9d59dfe
Do not use Serial2 for ESP32C3, too ( #1798 )
...
src/esphome/components/logger/logger.cpp: In member function 'void esphome::logger::Logger::pre_setup()':
src/esphome/components/logger/logger.cpp:142:29: error: 'Serial2' was not declared in this scope
this->hw_serial_ = &Serial2;
2021-05-18 19:16:51 +12:00
romerod
d3e291b442
Add on_tag_removed trigger to pn532 ( #1436 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-18 11:54:09 +12:00
Otto Winter
d4686c0fb1
Introduce new async-def coroutine syntax ( #1657 )
2021-05-17 17:14:15 +12:00
Jesse Hills
030c87d142
Allow RC522 components to have multiple configurations ( #1782 )
2021-05-17 13:53:35 +12:00
Jesse Hills
95ed3e9d46
Revert "Added bottom segment to digit 9 ( #1787 )" ( #1791 )
...
This reverts commit 9ecead2645
2021-05-17 13:22:49 +12:00
Stanislav Meduna
d0eaebe19f
Add support for the XPT2046 touchscreen controller ( #1542 )
2021-05-17 13:03:58 +12:00
testbughub
9ecead2645
Added bottom segment to digit 9 ( #1787 )
2021-05-17 11:38:49 +12:00
Stefan Agner
98166dfa66
Bump Arduino SDK for ESP32 to 1.0.6 ( #1789 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-17 11:38:26 +12:00
Franck Nijhof
5645be4e0f
Add attribute support to Home Assistant sensors ( #1770 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-17 11:16:22 +12:00
Jesse Hills
9a7a205510
Generate protobuf code closer to formatted files ( #1790 )
2021-05-17 10:54:17 +12:00
Jesse Hills
7e3b8fd346
Allow RC522 components to have multiple configurations ( #1782 )
2021-05-15 17:02:52 +12:00
Guillermo Ruffino
3d6dcc9eee
Add more json schema generation features ( #1690 )
...
* some enums
* extract enums, light effects remote_receiver etc
* more pins schema
* update to core changes
2021-05-14 20:35:39 -03:00
Jesse Hills
4f6982fbc5
Add action to set total pulses on pulse_meter ( #1757 )
2021-05-14 20:06:31 +12:00
Stanislav Meduna
00c144daeb
Autorepeat filter for the binary sensors ( #1681 )
...
* add the autorepeat filter
* add a test for the autorepeat filter
* make no timing equivalent to a single default one
2021-05-13 17:36:53 -03:00
BoukeHaarsma23
9e7acd6f75
Add sm2135 component ( #1736 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-13 07:17:13 +12:00
Yuval Aboulafia
7d9c043f1d
Use core constants for sample duration on bh1750 ( #1764 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-13 07:17:13 +12:00
Guillermo Ruffino
bafbeefb37
Switch to esphome/AsyncTCP-esphome v1.2.2. ( #1762 )
2021-05-13 07:17:13 +12:00
BoukeHaarsma23
54660300e9
Add sm2135 component ( #1736 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-13 07:14:01 +12:00
onde2rock
5dc40049be
Add function to set SDS011 sensor in sleeping state ( #1416 )
...
Co-authored-by: aurelien <aurelien.antunes@gmail.com>
2021-05-12 16:38:29 +12:00
RubyBailey
1e46b4073f
Mitsubishi Heat Pump - Fixed default transmit_state to be generic instead of for a specific type of heat pump ( #1414 )
...
Co-authored-by: RubyBailey <ruby_bailey11@hotmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-12 16:07:28 +12:00
krunkel
29fc4af0fc
Add delay to aht10.cpp ( #1498 )
2021-05-12 15:50:26 +12:00
Yuval Aboulafia
cdc9c99d40
Use core constants for sample duration on bh1750 ( #1764 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-12 10:16:59 +12:00
André Klitzing
b966e58f9e
Fix build issues for idf 4.2 (Support ESP32-S2) ( #1433 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-05-12 09:57:39 +12:00
André Klitzing
a546677b08
Fix build issues for idf 4.2 (Support ESP32-S2) ( #1433 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-05-12 08:31:40 +12:00
Jesse Hills
5c3af1d3f6
Allow duration for deep_sleep.enter to be templateable ( #1765 )
2021-05-11 12:36:14 -03:00
Maurice Makaay
7665a220a0
Fix error when using %% in printf format. ( #1713 )
...
For printf formatting, a check is done to see if the number of
arguments matches the number of printf formatting placeholders.
The escape code `%%` that is used for representing a literal `%`
is also counted as a placeholder, but no argument will be provided
for that one.
This makes it impossible to use something like `("%f%%", percentage)`
in the code. In such case, one gets the error:
`Found 2 printf-patterns (%f, %%), but 1 args were given!`
This commit fixes this behavior by omitting the `%%` from the matches.
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-05-11 12:15:29 -03:00
Guillermo Ruffino
4250af4dd9
Switch to esphome/AsyncTCP-esphome v1.2.2. ( #1762 )
2021-05-11 12:05:49 -03:00
Jesse Hills
44562dbef1
Merge branch 'dev' into bump-1.18.0b1
2021-05-10 07:54:06 +12:00
Otto Winter
229bf719a2
Implement external custom components installing from YAML ( #1630 )
...
* Move components import loading to importlib MetaPathFinder and importlib.resources
* Add external_components component
* Fix
* Fix
* fix cv.url return
* fix validate shorthand git
* implement git refresh
* Use finders from sys.path_hooks instead of looking for __init__.py
* use github:// schema
* error handling
* add test
* fix handling git output
* revert file check handling
* fix test
* allow full component path be specified for local
* fix test
* fix path handling
* lint
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-05-07 15:02:17 -03:00
Farzad E
2225594ee8
Added an option to disable mDNS ( #1716 )
...
* Added an option to disable mDNS
* Fixed linter issues
* Moved the enable_mdns option to WiFi and Ethernet components
* extracted common method for add mdns library
* lint
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-05-06 12:31:42 -03:00
mbo18
f7232b199a
Change wifi signal strength unit to dBm ( #1734 )
2021-05-05 20:13:14 +12:00
Ryan Mounce
ffc6fe9ca0
Add support for controlling Tuya fan direction ( #1409 )
2021-05-05 16:24:31 +12:00
Alex Konradi
06b8e4df27
Call Stepper::should_step_ every loop iteration ( #1373 )
2021-05-05 14:32:15 +12:00
d-two
28ed42d879
Add Hyperion Support ( #1339 )
2021-05-05 14:09:38 +12:00
0x0a11c0de
98f0d75180
Fix #1940 : Implement speed_count in TuyaFan ( #1654 )
...
Co-authored-by: Frank Riley <fhriley@gmail.com>
2021-05-04 14:11:24 +12:00
buxtronix
dd4fb85170
Ble client fixes ( #1739 )
...
Co-authored-by: Ben Buxton <bb@cactii.net>
2021-05-04 08:51:03 +12:00
buxtronix
02aa75f68c
BLE client support on ESP32 ( #1177 )
...
Co-authored-by: Ben Buxton <bb@cactii.net>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-03 11:10:50 +12:00
Alex
07db9319ad
Swap fan and swing fields for Fujitu ACs ( #1635 )
2021-04-30 11:53:44 +12:00
Wojtek Strzalka
4ae4a4ee88
Support for TOF10120 distance sensor ( #1375 )
2021-04-29 11:49:46 +12:00
Guillermo Ruffino
a7c648b60b
RC522 fixes ( #1479 )
2021-04-29 10:50:24 +12:00
Barry Loong
4d7c1ae143
Add Grow Fingerprint Reader ( #1356 )
2021-04-29 10:08:27 +12:00
elyorkhakimov
cc6d1e85cc
Addition of forward and reverse active energy counters to ATM90E32 sensor component ( #1271 )
...
Co-authored-by: Elyor Khakimov <elyorkhakimov@forwardnetworks.com>
2021-04-29 07:15:50 +12:00
Stephen Tierney
7fb116d87d
Add support for SHT4X ( #1512 )
2021-04-28 20:22:46 +12:00
Christian Ferbar
cc43e01e34
Add monochromatic effects: Pulse, Random ( #1616 )
2021-04-28 15:05:04 +12:00
Guillermo Ruffino
bb3d0706d3
Revert "Bump AsyncTCP-esphome to 1.2.1. ( #1693 )" ( #1709 )
...
This reverts commit aed6f2b1ea
2021-04-21 10:33:59 -03:00
Richard Klingler
820dedbcd2
Added / to default glyphs ( #1691 )
...
Co-authored-by: Charlie Root <klingler@blender.klingler.net>
2021-04-21 12:10:45 +02:00
Maurice Makaay
aed6f2b1ea
Bump AsyncTCP-esphome to 1.2.1. ( #1693 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-04-19 20:15:37 -03:00
John Coggeshall
bf1885af3f
Implementing the remainder of GPS data for the GPS component. ( #1676 )
2021-04-11 19:15:23 +02:00
Otto Winter
d8e4f5d56b
Sensor Average Filter Fix Floating Pointer Error Accumulating ( #1624 )
2021-04-09 10:27:18 +02:00
SenexCrenshaw
2033ac34e5
Sgp40 ( #1513 )
...
* Start of SGP40 dev
* Clean up
* Initial Commit
* VOC is working
* Fixed up sensor config
* Lint Fixes
Added in save/restore baseline
Noted original repo in header
* Lint Fixes
Added to test
* Lint Fixes
* Added additional check on restoring
* Removed double check
* Changed defines to static const double
* Changed defines to const
Do not send voc index until sensor stabilizes
* Fixed sensor stabilization message
* Fixup according to PR
* samples_read increment fix
* Fixed missing device class
* Choose a SENSOR device class
* Moved some sensors for tests
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-04-08 22:40:19 -03:00
SenexCrenshaw
a39bb7b92f
Support custom build_flags for bme680_bsec ( #1678 )
2021-04-08 17:06:54 +02:00
Dan Gentry
b53f9f2a81
Daylight Saving Time spelling fix ( #1677 )
2021-04-08 17:04:40 +02:00
Otto Winter
586e36906d
Fix sensor.sensor_schema interface changed ( #1659 )
2021-04-08 14:37:55 +02:00
Gareth Cooper
e6f8e73705
Receive long MQTT payload ( #1590 )
2021-04-08 14:26:34 +02:00
Guillermo Ruffino
2e50e1f506
Fix servo detach chopped PWM ( #1650 )
2021-04-08 14:22:30 +02:00
Anthony Uk
76a6c39f25
mqtt_client: Added MQTTClientComponent::unsubscribe() ( #1672 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-04-08 14:21:42 +02:00
rbaron
bf01c22e1f
Adds support for b-parasite soil moisture sensor ( #1666 )
2021-04-08 13:59:30 +02:00
Otto Winter
7964b724ed
Rewrite sun component calculations ( #1661 )
2021-04-07 12:16:36 +02:00
Vegetto
3ecae3f16f
fixes #858 - esphome crashes with neolightbus and RMT ( #1667 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-04-06 14:31:38 +02:00
Anthony Uk
5c359856ff
Fixed CustomComponentConstructor::get_component() ( #1653 )
...
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-04-06 13:50:31 +02:00
Trevor North
2d618768d5
Add BME680 via BSEC integration ( #1313 )
2021-04-06 12:19:56 +02:00
Stanislav Meduna
808e3be324
Add the display.is_displaying_page condition ( #1646 )
...
* display: add the display.is_displaying_page condition
* use maybe_simple_value for page_id
* add test
2021-04-02 23:00:41 -03:00
Andreas Hergert
9e23987db8
Add I2CMultiplexer in generel and the TCA9548A in special ( #1410 )
...
* Added I2CMultiplexer in generel and the TCA9548A in special
* cleanup
* tidy
* tidy
* tidy
* tidy
* Update CODEOWNERS
* Update CODEOWNERS
* added CODEOWNERS
* Fix CODEOWNERS
* protected function
* fixed scan
* fixed style
* added to test1.yaml
* Update esphome/components/tca9548a/__init__.py
* Update esphome/components/i2c/__init__.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/i2c/i2c.cpp
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/i2c/__init__.py
* Update esphome/components/i2c/__init__.py
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* Update esphome/components/i2c/i2c.cpp
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* added define statements for I2C Multiplexer
* fix
* try to tidy
* bug fix
* tidy
* override fix
* only change channel if different
* tidy
* added test
* testfix
* added defines
* tidy
* fix dep
* like recommended
Co-authored-by: Andreas Hergert <andreas.hergert@otrs.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-03-29 16:50:30 -03:00
Guillermo Ruffino
ad76312f66
fix servo not reattaching with same target ( #1649 )
2021-03-28 22:35:39 -03:00
Diego Elio Pettenò
a6255c31fe
Add optional bindkey support for CGG1. ( #1407 )
2021-03-26 07:33:06 +13:00
buxtronix
46356cbc4a
Fix BLE UUID matching ( #1637 )
...
Co-authored-by: Ben Buxton <bb@cactii.net>
2021-03-23 18:21:04 +13:00
Jesse Hills
4d340dc029
Merge branch 'dev' into bump-1.17.0b1
2021-03-22 20:08:57 +13:00
Jesse Hills
af3273d930
Add trigger for http actions to receive the status code ( #1599 )
2021-03-22 16:26:10 +13:00
Niccolò Maggioni
8f1eb77e05
Background calibration & ABC commands for SenseAir S8 ( #1623 )
2021-03-22 12:59:41 +13:00
matikij
91898cb814
Add 2.13in-ttgo-b1 waveshare epaper module. ( #1326 )
2021-03-20 20:32:46 +13:00
Keith Burzinski
818a7f1c78
Declare Color objects in main.cpp ( #1395 )
2021-03-19 23:40:05 +13:00
Jesse Hills
dedf343bd5
Fix pulse-meter with device_class and black ( #1621 )
2021-03-19 21:40:11 +13:00
DrZoid
e5b45b6b4b
e131: fix issue 1579: limitation of maximum light count ( #1619 )
2021-03-19 21:19:34 +13:00
Steve Baxter
a77784a6da
Implement pulse_meter as an improvement on pulse_counter and pulse_width for meters ( #1434 )
2021-03-19 21:16:27 +13:00
Mike Ryan
f63f9168ff
Add addressable_light display platform ( #1272 )
2021-03-18 19:08:50 +13:00
SenexCrenshaw
b5b2036971
8266 hardware spi enable with just 3 pins ( #1617 )
2021-03-18 13:59:47 +13:00
SenexCrenshaw
a96b6e7002
SPI transfer fix. Use write when no miso pin is set ( #1563 )
2021-03-18 13:54:58 +13:00
Sergey V. DUDANOV
f34c9b33fc
Midea climate support ( #1328 )
...
* Added support for Midea IoT climate devices via UART interface (USB-dongle)
* Fixed lint checks
* Fixed lint checks
* CODEOWNERS update
* Clang-format
* Clang-format
* Add network device notification message support (show WiFi sign on devices)
* Make wifi_signal_sensor optional component
* Some optimization
* Optimizations and code formatting
* Fixed lint checks
* Fixed lint checks
* Fixed sign error
* Code changes
* Network notify repeat every 10 min
* Added log messages
* Fixed lint checks
* Refactoring: MideaClimate => MideaAC
* Using enums instead literals in Midea states
* Enum changed to be more correct
* Shrink notify frame to 32 bytes
* Fixed lint checks
* Change notify frame appliance type to common broadcast
* Control optimization
* Fixed control error
* Control command now don't reset others uncontrollable properties of device
* Fixed lint checks
* Some optimization
* on_receive callback give const Frame
* Fix control
* Fixes
* Some minor changes
* Fixed lint error
* No dependency from wifi_signal sensor for stretched WiFi icon. New option: stretched_icon instead wifi_signal_id.
* Fix option name
* Added export of outdoor temperature as sensor value
* Fixed lint errors
* Fixed pylint error
* Minor fix
* Fix temperature overflow in some cases
* Added answer on QueryNetwork command from appliance. Now don't wait for ack on 0x0D command.
* Fix lint error
* Added humidity setpoint optional sensor
* Added boolean options 'swing_horizontal' and 'swing_both'
* Added debug frame output
* Added debug frame output
* Fix lints error
* Some debug output optimization
* Fix lint check
* Some code optimization: adding templates
* Fix lint error
* Added sensors device classes
* Python code reformatted with black formatter
* RX frame debug message
RX frame debug message now prints before checking
* Remove CRC check for receiving frames
* Added experimental power usage option
* Added power usage option
* Fixed lint errors
* Major changes. See esp-docs.
* Added tests in test4.yaml
* Added tests in test1.yaml
* Added wifi dependency
* Fix test1.yaml
* Some fix :)
* One more refactoring
* One more refactoring
* One more refactoring
2021-03-17 17:27:50 -03:00
Jim Ekman
7708b81ef5
Support fan speed levels ( #1541 )
...
* Add fan speed percentage support to the API
* Add float fan speed percentage
* Add percentage support to automation and configuration
* Update Tuya fan
* Fix pylint warning
* Update API to use speed levels instead of percentage
* Use speed levels
* Fix type warnings
* MQTT component now converts between speed levels and enums
* Webserver now supports speed_level
* Update prometheus
* Remove low/medium/high settings from speed fan
* Remove unused enum
* Configurable speed levels for speed fan
* Remove unused import
* Rename speed_level->speed and speed_levels->speed_count
* Rename supported_speed_levels -> supported_speed_count in API and FanTraits
Field id stays the same in the protocol, so the change is not breaking for aioesphome.
2021-03-17 10:40:02 -03:00
WeekendWarrior1
08998caabc
a4988 wait 1ms when coming out of sleep ( #1597 )
2021-03-13 21:29:31 -03:00
Jesse Hills
848a5f1680
Change COLOR_ON to be 255 values instead of 1 ( #1594 )
2021-03-13 21:27:16 -03:00
Alex
2e7c1d7345
Added receive for Fujitsu ACs ( #1577 )
2021-03-13 18:45:01 -03:00
Samuel Sieb
c9ee513fa8
PN532 - don't read extra page and fix size ( #1565 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2021-03-11 18:26:55 +13:00
Samuel Sieb
2a12caa955
change lcd clear() to clear the buffer ( #1600 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2021-03-11 18:17:50 +13:00
Derek Hageman
2c0fe49b86
Inkplate 6 Optimizations ( #1592 )
2021-03-08 19:25:49 +13:00
Guillermo Ruffino
1e227e8051
Schema dump ( #1564 )
...
* schema dump idea
accept boolean or anything default
accept null also for full dicts
added some common validators
more simple validators
support multi_conf
better handle automations
updates
updates
handle lists
removed not needed class
move to own folder
generalized for automations lists, etc
updates
updates
clean up
clean up
fix automations
made comment optional
basic docs support
added more docs
fixes docs handling
updates
updates
fix components parent
updates
updates
updates
Fix inkplate 6 registration
updates
Disable logging for vscode add on
better handle buses
keep extended order as in CONFIGs
updates
updates
updates
disable comments
moved to scripts/build_jsonschema
added configurable decorators
path handling
fix handle list_schema
fixes and cleanup
add jschema_extractor to maybe
updates
lint
no schema in git
add generated loggers list
* lint
2021-03-07 21:05:08 -03:00
Jesse Hills
570ec36fe3
MCP23XXX Refactor ( #1560 )
...
* Refactor MCP23XXX classes to consolidate shared code
* Update test mcp23xxx pin schemas
2021-03-07 16:23:54 -03:00
Guillermo Ruffino
69879920eb
add-black ( #1593 )
...
* Add black
Update pre commit
Update pre commit
add empty line
* Format with black
2021-03-07 16:03:16 -03:00
Guillermo Ruffino
2b60b0f1fa
fix servo warning ( #1591 )
2021-03-06 19:59:06 -03:00
needspeed
0f151a8f6b
Extend 'uart:' with 'invert:' for esp32 ( #1586 )
2021-03-06 10:25:07 -03:00
Gabe Cook
88b46b7487
Add min/max filters ( #1569 )
2021-03-05 10:10:06 -03:00
nikito7
fa290fbce8
Fix for waveshare 2.13in-ttgo-b73 ( #1543 )
2021-03-04 13:50:27 +13:00
Cody James
c5dc736c53
changed color temp from float to int ( #1522 )
...
* changed color temp from float to int
Changed cold_white_temperature and warm_white temperature from a float to an integer. This makes home assisting show it correctly in the color temperature slider. If it is set to float home assistant show something like 470.8390000283847829304845 in the slider which provides an ugly ui and color temperature to as a decimal is invalid anyway.
* Update esphome/components/rgbww/light.py
* Update esphome/components/rgbww/light.py
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-03-02 23:41:15 -03:00
Moritz Glöckl
8e93735861
Add support for the SM300D2 7-in-1 sensor module ( #1524 )
...
* Added support for SM300D2 sensor module
* Fixed lint errors due to added tvoc config
* add device class
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-03-02 21:54:52 -03:00
SenexCrenshaw
ac25b138f5
Migrate ESPColor to Color ( #1551 )
...
* Migrate ESPColor to Color
* color.h constructor fix
* Updated componets to use Color
Added a using for ESPColor
* Lint fixes
* Fixed value error
* Update display components to use colorutil
* Updated to latest PR comments
* Fixed COLOR_WHITE
* Moved esp_scale to color_utils
* Rename color_utils to display_color_utils
2021-03-02 11:08:57 -03:00
marecabo
422f0ad7a9
Add constants for device classes of binary_sensor ( #1549 )
2021-02-28 20:55:32 -03:00
Christian Ferbar
34d37961c3
ADC fix: GPIO0 not usable as output if ADC_VCC is used ( #1557 )
2021-02-28 14:02:02 -03:00
Seppel Hardt
bdf004867d
Added samsung36 ir protocol ( #1438 )
...
* Added samsung36 ir protocol
* Make linter happy
* Added test and fixed python failure
* Sorry for the commits but linter was still not happy :)
* Okay have to run script/clang-format -i
Co-authored-by: tuxBurner <tuxBurner@boggo.de>
2021-02-27 20:16:27 -03:00
Gabe Cook
08ecca86bc
Add send_every to uart switch for recurring data ( #1514 )
2021-02-27 19:53:53 -03:00
marecabo
520c4331e3
Add default device classes to sensor components ( #1533 )
...
* Add device_class arg to homeassistant sensor_schema call
* Add device_class arg to mqtt_subscribe sensor_schema call
* Add device_class arg to dht sensor_schema call
* Add device_class arg to dht12 sensor_schema call
* Add device_class arg to am2320 sensor_schema call
* Add device_class arg to atc_mithermometer sensor_schema call
* Add device_class arg to atm90e32 sensor_schema call
* Add device_class arg to bh1750 sensor_schema call
* Add device_class arg to ble_rssi sensor_schema call
* Add device_class arg to bme280 sensor_schema call
* Add device_class arg to bme680 sensor_schema call
* Add device_class arg to bmp085 sensor_schema call
* Add device_class arg to bmp280 sensor_schema call
* Add device_class arg to binary_sensor_map sensor_schema call
* Add device_class arg to apds9960 sensor_schema call
* Add device_class arg to as3935 sensor_schema call
* Add device_class arg to ccs811 sensor_schema call
* Add device_class arg to cse7766 sensor_schema call
* Add device_class arg to ct_clamp sensor_schema call
* Add device_class arg to dallas sensor_schema call
* Add device_class arg to duty_cycle sensor_schema call
* Add device_class arg to esp32_hall sensor_schema call
* Add device_class arg to hdc1080 sensor_schema call
* Add device_class arg to hlw8012 sensor_schema call
* Add device_class arg to hm3301 sensor_schema call
* Add device_class arg to hmc5883l sensor_schema call
* Add device_class arg to htu21d sensor_schema call
* Add device_class arg to hx711 sensor_schema call
* Add device_class arg to ina219 sensor_schema call
* Add device_class arg to ina226 sensor_schema call
* Add device_class arg to ina3221 sensor_schema call
* Add device_class arg to ibsth1 sensor_schema call
* Add device_class arg to max31855 sensor_schema call
* Add device_class arg to max31856 sensor_schema call
* Add device_class arg to max31865 sensor_schema call
* Add device_class arg to mhz19 sensor_schema call
* Add device_class arg to max6675 sensor_schema call
* Add device_class arg to mpu6050 sensor_schema call
* Add device_class arg to ms5611 sensor_schema call
* Add device_class arg to mcp9808 sensor_schema call
* Add device_class arg to ntc sensor_schema call
* Add device_class arg to pid sensor_schema call
* Add device_class arg to pmsx003 sensor_schema call
* Add device_class arg to pulse_counter sensor_schema call
* Add device_class arg to pulse_width sensor_schema call
* Add device_class arg to pzem004t sensor_schema call
* Add device_class arg to pzemac sensor_schema call
* Add device_class arg to pzemdc sensor_schema call
* Add device_class arg to qmc5883l sensor_schema call
* Add device_class arg to resistance sensor_schema call
* Add device_class arg to rotary_encoder sensor_schema call
* Add device_class arg to ruuvitag sensor_schema call
* Add device_class arg to scd30 sensor_schema call
* Add device_class arg to sds011 sensor_schema call
* Add device_class arg to senseair sensor_schema call
* Add device_class arg to sgp30 sensor_schema call
* Add device_class arg to sht3xd sensor_schema call
* Add device_class arg to shtcx sensor_schema call
* Add device_class arg to sps30 sensor_schema call
* Add device_class arg to sts3x sensor_schema call
* Add device_class arg to sun sensor_schema call
* Add device_class arg to tcs34725 sensor_schema call
* Add device_class arg to teleinfo sensor_schema call
* Add device_class arg to template sensor_schema call
* Add device_class arg to tmp102 sensor_schema call
* Add device_class arg to tmp117 sensor_schema call
* Add device_class arg to tsl2561 sensor_schema call
* Add device_class arg to tx20 sensor_schema call
* Add device_class arg to ultrasonic sensor_schema call
* Add device_class arg to uptime sensor_schema call
* Add device_class arg to vl53l0x sensor_schema call
* Add device_class arg to wifi_signal sensor_schema call
* Add device_class arg to xiaomi_cgd1 sensor_schema call
* Add device_class arg to xiaomi_cgg1 sensor_schema call
* Add device_class arg to xiaomi_gcls002 sensor_schema call
* Add device_class arg to xiaomi_hhccjcy01 sensor_schema call
* Add device_class arg to xiaomi_hhccpot002 sensor_schema call
* Add device_class arg to xiaomi_jqjcy01ym sensor_schema call
* Add device_class arg to xiaomi_lywsd02 sensor_schema call
* Add device_class arg to xiaomi_lywsd03mmc sensor_schema call
* Add device_class arg to xiaomi_lywsdcgq sensor_schema call
* Add device_class arg to xiaomi_mhoc401 sensor_schema call
* Add device_class arg to xiaomi_mjyd02yla sensor_schema call
* Add device_class arg to xiaomi_wx08zm sensor_schema call
* Add device_class arg to zyaura sensor_schema call
* Add device_class arg to ads1115 sensor_schema call
* Add device_class arg to adc sensor_schema call
* Add device_class arg to ade7953 sensor_schema call
* Add device_class arg to aht10 sensor_schema call
* Make args of sensor_schema required
* lint
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-02-27 19:28:06 -03:00
Otamay
69d39ef0cd
Added heater to climate_ir_lg ( #1555 )
...
* Added heater to climate_ir_lg
* Code formatting
* Code formatting
2021-02-27 18:55:27 -03:00
Robert Resch
6588e9380e
Replace substitutions in substitutions first ( #1567 )
2021-02-27 18:47:12 -03:00
stubs12
87154e9b6f
Tuya: Use queue for sending command messages ( #1404 )
2021-02-26 12:52:40 +13:00
Kurt Kellner
b91723344e
Vl53l0x change address ( #1126 )
...
* Added vl53l0x change address and timeout
* Added vl53l0x change address and timeout
* vl53l0x code cleanup and update test
* remove executable bit
* lint code cleanup
* code review fixes including timeout default to 10ms
* Code review cleanup and change a WARN log level message to DEBUG
* Fix issue where warn should be temporary
* Added name of sensor to warning message
* Fix blacklist lint issue
* Remove unused import
2021-02-25 19:12:06 -03:00
Otamay
92b36720b6
Climate IR LG -keep previous temp and fan if swing ( #1556 )
...
Swing IR command does not carry CLIMATE_FAN or TEMP within itself, so previous states sould be kept. Tested with actual LG IR remote controller.
2021-02-25 18:26:19 -03:00
spilin
3d0310d0e0
Add dial support for sim800l component ( #1558 )
2021-02-25 18:11:15 -03:00
dckiller51
f81cddf22e
Add Xiaomi Miscale v1 and v2 ( #1368 )
2021-02-22 22:23:12 +13:00
Jesse Hills
c519c02de8
Fix safe mode ota flashing under certain configurations ( #1534 )
...
* Fix safe mode ota flashing under certain configurations by allowing the arduino loop to run instead of while(true)
* rename to should_enter_safe_mode
* Fix line length
2021-02-20 19:29:52 +13:00
Samuel Sieb
eacac78099
Add reverse_enable for max7219 ( #1489 )
2021-02-20 19:29:52 +13:00
Kris
a925036ff8
Added Waveshare 2.90inch V2 e-ink display ( #1538 )
2021-02-20 19:29:52 +13:00
SenexCrenshaw
1468293f3e
fix DHT auto_detect check ( #1536 )
2021-02-20 19:29:52 +13:00
Guillermo Ruffino
25924ca4e8
fix substitution losing track of document range ( #1547 )
2021-02-19 21:52:42 -03:00
Jesse Hills
6c8ace0ce8
Fix safe mode ota flashing under certain configurations ( #1534 )
...
* Fix safe mode ota flashing under certain configurations by allowing the arduino loop to run instead of while(true)
* rename to should_enter_safe_mode
* Fix line length
2021-02-17 20:26:59 -03:00
Samuel Sieb
acc1af0f51
Add reverse_enable for max7219 ( #1489 )
2021-02-18 08:26:22 +13:00
Kris
c92c439d17
Added Waveshare 2.90inch V2 e-ink display ( #1538 )
2021-02-18 07:12:02 +13:00
SenexCrenshaw
410fad3b41
fix DHT auto_detect check ( #1536 )
2021-02-16 20:42:14 +13:00
Chris Nussbaum
dce20680d7
Add duration option to action start deep sleep ( #1526 )
2021-02-15 14:32:22 -03:00
marecabo
f95be6a0df
Device class attribute for sensor component ( #1525 )
...
* Add constants for sensor device_class
* Add device_class attribute to sensor component
* Add device_class attribute to sensor class
* Add device_class to mhz19 temperature sensor
* Add device_class to sensor in api component
* Add test for device_class of sensor
* Rename DEVICE_CLASS_NONE to DEVICE_CLASS_EMPTY for consistency
* Make optional attributes of sensor component truly optional
2021-02-15 12:49:02 -03:00
SenexCrenshaw
a342302114
st7735_conf_fixes ( #1530 )
2021-02-14 02:21:43 -03:00
Keith Burzinski
65c7e27a43
MCP230xx open drain interrupt pins ( #1243 )
2021-02-14 10:01:21 +13:00
Frank Bakker
57b56010da
Added energy sensor to hlw8012 ( #1198 )
2021-02-14 10:01:21 +13:00
SenexCrenshaw
ef89249019
Fixed ST7735 transfer_byte to write_byte without miso ( #1529 )
2021-02-14 10:01:21 +13:00
Jesse Hills
def70dde72
Fix PN532 SPI communication ( #1511 )
2021-02-14 10:01:21 +13:00
Keith Burzinski
b52f7cfe86
MCP230xx open drain interrupt pins ( #1243 )
2021-02-13 22:07:11 +13:00
Frank Bakker
81b512a7b3
Added energy sensor to hlw8012 ( #1198 )
2021-02-13 21:57:06 +13:00
Justin Gerhardt
57d6185374
Correct Native API Wire Format Documentation ( #1528 )
2021-02-13 21:36:39 +13:00
SenexCrenshaw
e288aa07fb
Fixed ST7735 transfer_byte to write_byte without miso ( #1529 )
2021-02-13 21:34:59 +13:00
rspaargaren
23cf120977
Added codeowners ( #1487 )
2021-02-10 09:20:31 -03:00
Jérémy JOURDIN
04d8593f38
Add MCP4725 DAC Component ( #1418 )
...
* Add MCP4725 DAC
* Fix lint
* Fix lint
* Fix lint
* Lint & cleanup
* Lint again
* One more lint
* add test
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-02-06 12:18:48 -03:00
fkirill
de3377132d
Adding support for the Inkbird IBS-TH1 Mini sensor ( #1099 )
2021-02-06 17:04:47 +13:00
Jesse Hills
b351cd94d7
Fix PN532 SPI communication ( #1511 )
2021-02-06 11:02:20 +13:00
Guillermo Ruffino
1952d275f7
RC522 increased retry loop count ( #1506 )
2021-02-03 12:33:29 +13:00
Guillermo Ruffino
bccaa78a90
RC522 increased retry loop count ( #1506 )
2021-02-03 12:30:20 +13:00
Jesse Hills
a7ec57d4be
Allow SCD30 sensors to be optional ( #1502 )
2021-02-01 15:34:44 +13:00
Jesse Hills
4eeb111fa3
Allow SCD30 sensors to be optional ( #1502 )
2021-01-30 16:50:09 +13:00
nikito7
5057caa7fc
Add support for MHO-C401 ( #1486 )
...
Committer: nikito7
Co-authored-by: vevsvevs <v-v@mail.ru>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: nikito7 <root@vbox.lan>
2021-01-27 23:04:20 +13:00
Paul Nicholls
ea019a057b
Add support for string-type Tuya datapoints ( #1488 )
2021-01-27 23:04:20 +13:00
nikito7
1d378e416d
Add support for MHO-C401 ( #1486 )
...
Committer: nikito7
Co-authored-by: vevsvevs <v-v@mail.ru>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: nikito7 <root@vbox.lan>
2021-01-27 20:14:43 +13:00
mhentschke
7b9c2d2978
Added options to control pulse duration on Climate_IR_LG Component ( #1470 )
...
* Added options to control pulse duration on Climate_IR_LG Component. This is usefull as some equipment from LG (Tested in Brazil AC unit) use different pulse durations in their protocol.
* Fixed C++ linting issues
* Fixed Python linting issues
* fixed spaces on parameters linting issue
* fixed spacing clint
* Removed unused constants
* Removed wrong spacing
* Changed int to time period in all new fields
Changed cv._int to cv.positive_time_period_microseconds in the time definitions for the new options
* Fixed the time defaults
Time defaults fixed for Climate_IR_LG.
2021-01-26 15:49:14 -03:00
Paul Nicholls
9d38543cb0
Add support for string-type Tuya datapoints ( #1488 )
2021-01-26 17:44:10 +13:00
SenexCrenshaw
65fbb8bc60
SPI wasnt being disabled after display update ( #1493 )
2021-01-26 13:39:42 +13:00
Philipp Tölke
97428f2ba2
Make fade_to*, lighten, and darken const ( #1450 )
2021-01-26 13:39:42 +13:00
Zixuan Wang
9ab6a7b7ff
Improve ccs811 precision ( #1428 )
2021-01-26 13:39:42 +13:00
Florian Mösch
e2ad6fe3d8
rename read/write to read/time/write_time ( #1468 )
2021-01-26 13:39:42 +13:00
Florian Mösch
6781d08c9b
time sync notification ( #1442 )
...
* add on_time_sync trigger
* cleanup lint
* fix review remark (sntp didn't trigger callbacks)
2021-01-26 13:39:42 +13:00
SenexCrenshaw
36a2ce2c23
SPI wasnt being disabled after display update ( #1493 )
2021-01-26 13:14:23 +13:00
Philipp Tölke
f084ab339b
Make fade_to*, lighten, and darken const ( #1450 )
2021-01-22 20:55:49 +13:00
Zixuan Wang
8352f52fef
Improve ccs811 precision ( #1428 )
2021-01-22 20:51:40 +13:00
Florian Mösch
b28735d63b
rename read/write to read/time/write_time ( #1468 )
2021-01-18 09:35:35 -03:00
Florian Mösch
4c105398f7
time sync notification ( #1442 )
...
* add on_time_sync trigger
* cleanup lint
* fix review remark (sntp didn't trigger callbacks)
2021-01-18 09:34:50 -03:00
David Zovko
6a99789c92
Inkplate 6 support for ESPHome ( #1283 )
...
* Add Inkplate 6 support
Inkplate 6 is e-paper display based on ESP32. This commit adds support for integrating Inkplate 6 into the ESPHome. Find more info here: inkplate.io
* Greyscale working
* Update inkplate.h
* Fix formatting
* Formatting
* Update esphome/components/inkplate6/display.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/inkplate6/display.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Fix some lint errors
Ignore some lint errors
Only allow on ESP32
* Update the codeowners file
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-01-17 17:06:38 +13:00
