rotarykite
df68403b6d
Fix senseair component uart read timeout ( #2658 )
...
Co-authored-by: DAVe3283 <DAVe3283+GitHub@gmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Chua Jun Chieh <junchieh.chua@softspace.com.my>
2021-11-17 07:57:03 +13:00
Ryan Hoffman
57bdc2b885
Add ble_client binary_output ( #2200 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-17 07:30:42 +13:00
Ryan Hoffman
f565ff5def
Use as_reversed_hex_array in ble_sensor to fix UUID parsing ( #2737 )
...
#1627 renamed as_hex_array to as_reversed_hex_array but forgot to rename these users.
2021-11-16 18:53:36 +01:00
H. Árkosi Róbert
8ece639987
Change log level from DEBUG to INFO for sniffing services ( #2736 )
...
Sniffing for codes only happens if the user deliberately asked for it with the related service through HA - to find out the codes present in the air. The resulted data shouldn't be printed out only in debug mode, as this is information required to be known on demand for later use, not actually a debug info. Changing log level from DEBUG to INFO for sniffing services has two benefits:
- no need to run firmware with DEBUG enabled for occasional sniffing with devices in production (no need to flash back and forth with different log levels set just for this reason)
- if the user still wants DEBUG enabled, sniffed data appears in different color, it's easier to find between the lines.
2021-11-16 23:28:12 +13:00
Jan Harkes
b35f509784
Allow for subsecond sampling of hmc5883l ( #2735 )
2021-11-16 09:16:43 +01:00
Jesse Hills
41a3a17456
Merge pull request #2734 from esphome/bump-2021.11.0b8
...
2021.11.0b8
2021-11-16 13:50:10 +13:00
Jesse Hills
cbbafbcca2
Bump version to 2021.11.0b8
2021-11-16 12:53:56 +13:00
Jesse Hills
c75566b374
Fix zeroconf time comparisons ( #2733 )
...
Co-authored-by: J. Nick Koston <nick@koston.org>
2021-11-16 12:53:56 +13:00
Jesse Hills
f1954df573
Fix zeroconf time comparisons ( #2733 )
...
Co-authored-by: J. Nick Koston <nick@koston.org>
2021-11-16 12:47:06 +13:00
Jesse Hills
7279f1fcc1
Merge pull request #2732 from esphome/bump-2021.11.0b7
...
2021.11.0b7
2021-11-16 12:19:07 +13:00
Jesse Hills
d7432f7c10
Bump version to 2021.11.0b7
2021-11-16 11:05:51 +13:00
Jesse Hills
b0a0a153f3
Improv serial/checksum changes ( #2731 )
...
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
2021-11-16 11:05:51 +13:00
Jesse Hills
9e4fa5dcf1
Improv serial/checksum changes ( #2731 )
...
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
2021-11-16 11:02:45 +13:00
Jesse Hills
024632dbd0
Merge pull request #2730 from esphome/bump-2021.11.0b6
...
2021.11.0b6
2021-11-16 10:53:11 +13:00
Jesse Hills
0a545a28b9
Bump version to 2021.11.0b6
2021-11-16 09:59:00 +13:00
Jesse Hills
0f2df59998
Add zeroconf as a direct dependency and lock the version ( #2729 )
2021-11-16 09:58:59 +13:00
Jesse Hills
0809673ba9
Add zeroconf as a direct dependency and lock the version ( #2729 )
2021-11-16 09:53:52 +13:00
cvwillegen
b386284180
Ignore secrets.yaml on command line ( #2715 )
2021-11-15 20:06:55 +01:00
Krzysztof Białek
515519bc87
Provide an option to select MQTT unique_id generator ( #2701 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-15 15:49:18 +01:00
Oxan van Leeuwen
5404163be0
Clean-up MAC address helpers ( #2713 )
2021-11-15 15:48:16 +01:00
Jesse Hills
29a7d32f77
Merge pull request #2725 from esphome/bump-2021.11.0b5
...
2021.11.0b5
2021-11-15 13:42:59 +13:00
Jesse Hills
687a7e9b2f
Bump version to 2021.11.0b5
2021-11-15 12:02:18 +13:00
Alexandre-Jacques St-Jacques
09e8782318
Remove unnecessary duplicate touch_pad_filter_start ( #2724 )
2021-11-15 12:02:18 +13:00
Alexandre-Jacques St-Jacques
0b193eee43
Remove unnecessary duplicate touch_pad_filter_start ( #2724 )
2021-11-15 11:58:22 +13:00
Jesse Hills
f2aea02210
Merge pull request #2723 from esphome/bump-2021.11.0b4
...
2021.11.0b4
2021-11-15 11:42:59 +13:00
Jesse Hills
194f922312
Bump version to 2021.11.0b4
2021-11-15 11:03:40 +13:00
Jesse Hills
fea3c48098
Fix indentation of write_lambda for modbus_controller number ( #2722 )
2021-11-15 11:03:39 +13:00
Sergey V. DUDANOV
c2f57baec2
RemoteTransmitter fix. Bug from version 2021.10. Some changes. ( #2706 )
2021-11-15 11:03:39 +13:00
Oxan van Leeuwen
f4a140e126
Feed WDT between doing ESP32 touchpad measurements ( #2720 )
2021-11-15 11:03:39 +13:00
Oxan van Leeuwen
ab506b09fe
Restore InterruptLock on wifi-less ESP8266 ( #2712 )
2021-11-15 11:03:39 +13:00
Krzysztof Białek
87e1cdeedb
Allow setting custom command_topic for Select and Number components ( #2714 )
2021-11-15 11:03:39 +13:00
Jesse Hills
81a36146ef
Bump ESPAsyncWebServer to 2.1.0 ( #2686 )
2021-11-15 11:03:39 +13:00
Jesse Hills
7333123ba4
Fix indentation of write_lambda for modbus_controller number ( #2722 )
2021-11-15 10:59:48 +13:00
Sergey V. DUDANOV
d99c5ed890
RemoteTransmitter fix. Bug from version 2021.10. Some changes. ( #2706 )
2021-11-15 10:40:35 +13:00
Oxan van Leeuwen
04740fbcbb
Install test requirements in lint Docker image ( #2719 )
2021-11-15 10:04:43 +13:00
Oxan van Leeuwen
6a7440f7d3
Feed WDT between doing ESP32 touchpad measurements ( #2720 )
2021-11-15 09:45:25 +13:00
Oxan van Leeuwen
14299bb2cc
Drop unused constants from const.py ( #2718 )
2021-11-15 08:07:58 +13:00
Oxan van Leeuwen
66cebfc992
Restore InterruptLock on wifi-less ESP8266 ( #2712 )
2021-11-15 08:05:11 +13:00
Maurice Makaay
108b8e6705
Fix rom/rtc.h deprecation compile warning for debug component ( #2520 )
2021-11-14 16:17:13 +01:00
Clifford Roche
4eaa6afa4d
Add greeyac protocol to IR Climate / HeatpumpIR ( #2694 )
2021-11-14 16:11:21 +01:00
Krzysztof Białek
f643a46bbf
Allow setting custom command_topic for Select and Number components ( #2714 )
2021-11-14 14:59:34 +01:00
Sergey V. DUDANOV
aae63a7ff3
Add climate on_state trigger ( #2707 )
2021-11-13 15:42:15 +01:00
NeoAcheron
582567696e
pmsx003: add support for PMS5003S device ( #2710 )
2021-11-13 15:14:23 +01:00
Jesse Hills
2e0c89409d
Bump ESPAsyncWebServer to 2.1.0 ( #2686 )
2021-11-13 21:22:32 +13:00
Jesse Hills
7fa4a68a27
Merge pull request #2704 from esphome/bump-2021.11.0b3
...
2021.11.0b3
2021-11-12 17:21:58 +13:00
Jesse Hills
f1c5e2ef81
Bump version to 2021.11.0b3
2021-11-12 16:12:31 +13:00
lcavalli
b526155cce
Update device classes for binary sensors ( #2703 )
2021-11-12 16:12:31 +13:00
Jesse Hills
62c3f301e7
Only allow prometheus when using arduino ( #2697 )
2021-11-12 16:12:31 +13:00
Jesse Hills
38cb988809
Remove my.ha links from improv ( #2695 )
2021-11-12 16:12:31 +13:00
lcavalli
7bb7456a8b
Update device classes for binary sensors ( #2703 )
2021-11-12 13:17:10 +13:00
