Commit graph

1987 commits

Author SHA1 Message Date
Gavin Mogan
e2b655a6cc
Add huzzah gpio pins (#1096) 2020-06-19 13:02:59 -03:00
Lukas Klass
04e6f475b4
Fix decode and encode for RC5-protocol (#1047)
* Fix receive and transmit for RC5-protocol

Receive did not work as a sequence of two high or low puleses are detected as one long pulse. Transmit was extended to respect the field bit in order to enable codes up to 127.

* Fix code formatting
2020-06-18 19:50:58 -03:00
Keith Burzinski
0082c5b459
Climate bang bang enhancements (#1061)
* Add fan support to bang bang controller

* Fix heat-only and cool-only modes

* Added support for all climate actions and modes

* Fix up some comments

* Fan_only mode behavior tweak

* Updated test

* Updated test, take 2

* Add accessor methods for easier use in lambadas

* Revert "Add accessor methods for easier use in lambadas"

This reverts commit f15713129cd5587242a08ad1e2ee37cbf075aa03.

Don't code late at night when sleepy.

* Fix single/dual setpoint support

* Linted

* Properly implement single-point, validation improvements

* Another quick fix...sigh

* Update tests

* Update tests, take 2

* Revert "Update tests, take 2"

This reverts commit 71bb7fccc53d95a7d221e80ea0a931fb3cfd9a0c.

Nope.

* Revert "Update tests"

This reverts commit 42044291efaaf09858f29ab27bbc3aa9e8b80ee9.

Nope 2.

* Updated/fixed tests

* Revert "Updated/fixed tests"

This reverts commit a1a5b1c7db9a240b9da668b6e48abe1dd7910777.

Taking a different approach.

* Revert "Another quick fix...sigh"

This reverts commit 6b1955724a2de3c2d1534ec206dd5794bbb5f568.

Taking a different approach.

* Revert "Properly implement single-point, validation improvements"

This reverts commit f5bfff099e1dc58edd3898da8655c147adde2301.

Taking a different approach.

* Single/dual set point fixes, full validation

* Fix test

* Fix restore-on-boot, clean up comments

* Decouple two-point/auto operation, more polish

* One last away mode tweak

* Added set point validation

* Clean up over-publishing, always call action after boot

* Add fan support to bang bang controller

* Fix heat-only and cool-only modes

* Added support for all climate actions and modes

* Fix up some comments

* Fan_only mode behavior tweak

* Updated test

* Updated test, take 2

* Add accessor methods for easier use in lambadas

* Revert "Add accessor methods for easier use in lambadas"

This reverts commit f15713129cd5587242a08ad1e2ee37cbf075aa03.

Don't code late at night when sleepy.

* Fix single/dual setpoint support

* Linted

* Properly implement single-point, validation improvements

* Another quick fix...sigh

* Update tests

* Update tests, take 2

* Revert "Update tests, take 2"

This reverts commit 71bb7fccc53d95a7d221e80ea0a931fb3cfd9a0c.

Nope.

* Revert "Update tests"

This reverts commit 42044291efaaf09858f29ab27bbc3aa9e8b80ee9.

Nope 2.

* Updated/fixed tests

* Revert "Updated/fixed tests"

This reverts commit a1a5b1c7db9a240b9da668b6e48abe1dd7910777.

Taking a different approach.

* Revert "Another quick fix...sigh"

This reverts commit 6b1955724a2de3c2d1534ec206dd5794bbb5f568.

Taking a different approach.

* Revert "Properly implement single-point, validation improvements"

This reverts commit f5bfff099e1dc58edd3898da8655c147adde2301.

Taking a different approach.

* Single/dual set point fixes, full validation

* Fix test

* Fix restore-on-boot, clean up comments

* Decouple two-point/auto operation, more polish

* One last away mode tweak

* Added set point validation

* Clean up over-publishing, always call action after boot

* Added refresh() function to allow easy on-device state refreshing
2020-06-17 20:16:42 -03:00
MasterTim17
3fd130869e
fix for ESP32 'Association Leave' (#1081) 2020-06-15 21:52:47 -03:00
korellas
d000440927
sgp30 baseline write bug (#1157) (#1078) 2020-06-15 00:41:17 -03:00
rnauber
4fb750de43
ADE7953: Fix dereferencing of a null pointer (#1086)
* ADE7953: Fix dereferencing of a null pointer

The ade7953 driver dereferences a null pointer, when not all of
its sensors are used. This gives an exception like:

Fatal exception:29 flag:2 (EXCEPTION) epc1:0x4020c241 epc2:0x00000000 epc3:0x00000000 excvaddr:0x00000018 depc:0x00000000

* Fix formatting

Co-authored-by: olg <x>
2020-06-15 00:37:15 -03:00
SenexCrenshaw
9632ac0e02
Add MCP3008 I/O Expander (#1057)
* Add MCP3008

* Fixed Travis build issues

* Travis Build Fix

* Fix Travis foramt issues

* Travis fixes

* Code review changes

* Fix bit shift. off by one and selecting wrong pin

* general fixes

* lint

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-06-14 22:42:46 -03:00
Jeff Rescignano
35078fd52f
Add API component to logging error message (#1062)
* Add API component to logging error message

* lint

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-06-14 22:41:02 -03:00
Jim Persson
0bb81e5b2d
Add support for controlling fan direction (#1051)
* Fix fan oscillation trait not being used

* Add fan direction support to SpeedFan

* Add fan direction to API

* Add fan direction support to BinaryFan

* Fix CI errors

* Fix python format

* Change some ordering to trigger CI

* Add test for the configuration
2020-06-14 16:54:31 -03:00
Christian Ferbar
35a2258f12
SenseAir: flush input buffer on read error (#1017)
* SenseAir: flush input buffer on read error

* SenseAir: flush input buffer on read error - fix typo

* SenseAir: flush input buffer on read error - fix formating

* SenseAir: flush input buffer on read error - fix formating2

* SenseAir: flush input buffer on read error - fix formating3

* SenseAir: flush input buffer on read error - fix formating4

* Update esphome/components/senseair/senseair.cpp

* Update esphome/components/senseair/senseair.cpp

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-06-13 20:26:41 -03:00
Niklas Wagner
b650704877
Update docker base image (#1093)
* Upgrade docker base image to 2.1.0

* Upgrade docker base image to 2.1.1

Co-authored-by: Otto Winter <otto@otto-winter.com>
2020-06-13 19:51:43 -03:00
Kamil Trzciński
0c0dec2534
Add WLED support (#1092)
A component to support [WLED](https://github.com/Aircoookie/WLED/wiki/UDP-Realtime-Control).
This allows to control addressable LEDs over WiFi/UDP, by pushing data right into LEDs.

The most useful to use [Prismatik](https://github.com/psieg/Lightpack) to create
an immersive effect on PC.

It supports all WLED protocols:
- WARLS
- DRGB
- DRGBW
- DNRGB
- WLED Notifier

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-06-12 20:50:09 -03:00
Kamil Trzciński
d1b051a6bd
Add Adalight support (#956)
A component to support [Adalight](https://learn.adafruit.com/adalight-diy-ambient-tv-lighting).
This allows to control addressable LEDs over UART, by pushing data right into LEDs.

The most useful to use [Prismatik](https://github.com/psieg/Lightpack) to create
an immersive effect on PC.

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-06-12 20:34:38 -03:00
Kamil Trzciński
27204aa53c
Add E1.31 support (#950)
This adds a `e131` component that allows
to register `e131` addressable light effect.

This uses an internal implementation that
is thread-safe instead of using external libraries.
2020-06-12 20:17:13 -03:00
Niklas Wagner
8aedac81a5
RGBWW/CCT Lights: Fix gamma_correct when using constant_brightness (#1043) 2020-06-12 15:17:46 -03:00
Evgeny
42007d03d4
AQI calculator for HM3301 (#1011)
* HM3301 AQI calculator

* remove logs

* fixed after lint

* fixed after lint

* fixed after lint

* check NP for AQI sensor

* validation for AQI sensor
2020-06-11 23:14:54 -03:00
igg
821c1a8bbd
making SPI CS optional (#988)
* making SPI CS optional

* CS pin should be declared as optional or required in CONFIG_SCHEMA

* changed SPI_DEVICE_SCHEMA to a function, like i2c

* added spi_device_schema() to pcd8544, lint fixes

* updated max31856 with new spi_device_schema()

* cleanup imports

Co-authored-by: Ilya Goldberg <iggie@mac.com>
2020-06-10 17:03:11 -03:00
Adriaan Peeters
bab562dc3a
Turn off PN532 RF field when not expecting a tag (#1046)
* Turn off PN532 RF field when not expecting a tag

Avoids interference with Wifi connectivity of nearby devices.

* Rename turn_off_rf_ method

* documented off command bytes

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-06-09 23:23:25 -03:00
Marvin Gaube
f63fd9696f
Add Webserver Prometheus support for sensor, binary sensor, fan, light, cover and switch (#1032) 2020-06-09 22:00:12 -03:00
Kamil Trzciński
cd7af19e7c
Extend uart: with rx_buffer_size: (#1006)
* Extend `uart:` with `rx_buffer_size:`

This allows to configure `rx_buffer_size:`
to efficiently receive big payloads over UART

* lint

* remove old default value

* add test

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-06-09 21:22:06 -03:00
Ivan Shvedunov
64bd33a94e
Sort keys in dicts in output yaml for 'config' command (#1049)
Having different output each time due to random key order makes some
tasks harder (such as CI scripts).
2020-06-09 00:10:49 -03:00
Otto Winter
60e6366521
Bump version to v1.14.4 2020-06-05 12:56:23 +02:00
Otto Winter
072b2c445c
Add ESP8266 core v2.6.2 (#905)
* Add ESP8266 core v2.6.2

* Upstream ESP8266 Wifi fixes

* Replace disable_interrupt with InterruptLock C++ class

* Update code to use InterruptLock

* Lint

* Update dht.cpp

* Improve InterruptLock docs, mark as ICACHE_RAM_ATTR

* Fixes
2020-06-05 12:56:10 +02:00
Otto Winter
219fe41831
Update ESP32 BLE ADV parse to match BLE spec (#904)
* Update ESP32 BLE ADV parse to match BLE spec

* Update xiaomi

* Update ruuvi

* Format

* Update esp32_ble_tracker.cpp

* Fix log

* Format

* Update xiaomi_ble.cpp
2020-06-05 12:55:24 +02:00
Otto Winter
dcc8bb83af
Ignore ESP32 Camera unknown framesizes (#901)
Fixes https://github.com/esphome/issues/issues/866
2020-06-05 12:52:05 +02:00
Otto Winter
a8e3521f3c
web_server call setup_controller (#899) 2020-06-05 12:52:05 +02:00
Otto Winter
706dc6d116
Fix MQTT logs Int or String expected Python 3 (#898)
Fixes https://github.com/esphome/issues/issues/850
2020-06-05 12:52:04 +02:00
Guillermo Ruffino
84accb6df6
fix climate_ir on receive optional (#897)
* fix climate on receive optional

* add climate tests
2020-06-05 12:52:04 +02:00
warpzone
8421570b18
fix the problem of missing part of advertising packet when activ… (#868)
* fix the problem of missing part of advertising packet when active scan is enabled.

* fix for ci-suggest-changes
2020-06-05 12:52:04 +02:00
Otto Winter
d355543ac9
Merge branch '1.14.4' 2020-06-05 12:42:56 +02:00
Otto Winter
3a597c5aa6
Fix gitignore intellij idea 2020-06-05 12:38:05 +02:00
Otto Winter
c7dddaded4
Upgrade docker base image to 2.1.1 2020-06-05 12:28:37 +02:00
Otto Winter
aae4b2ea5d
Upgrade docker base image to 2.1.0 2020-06-05 12:27:26 +02:00
Otto Winter
310e2a0b20
Fix build 2020-06-05 12:25:29 +02:00
Niklas Wagner
0b04d143ac
Upgrade dependencies 2020-06-05 12:00:20 +02:00
rradar
d1f4c2ab57
BH1750 Measurement time (#997)
* BH1750 Measurement time

Fixes https://github.com/esphome/feature-requests/issues/148

* lint

* add test

Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-05-28 23:10:34 -03:00
Adrian Cuzman
7e4d12f880
added energy reading for pzem004 (#1022) 2020-05-28 19:54:00 -03:00
igg
ecd65003d4
Added support for ssd1327 (#985)
Co-authored-by: Ilya Goldberg <iggie@mac.com>
2020-05-28 19:11:25 -03:00
gitolicious
fed37b48a1
Explicitly set language to English (#1073) 2020-05-26 19:47:35 -03:00
Alexander Pohl
3fba3a5e2e
Add support for additional Xiaomi BLE sensors (#1027) (#1027) 2020-05-26 19:33:28 -03:00
Guillermo Ruffino
9e7e8ab116 format 2020-05-24 23:45:15 -03:00
Guillermo Ruffino
1bec1faf6d lint 2020-05-24 23:27:28 -03:00
declanshanaghy
e64246f642
Adding support for MAX31856 Thermocouple Temperature Sensor (feature #700) (#1039) 2020-05-24 19:33:59 -03:00
0hax
fb2b7ade41
Uart improvments (#1024)
* uart: Add support for specifying the number of bits and parity.

ESP8266SwSerial doesn't really check parity but just read the parity bit
and ignore it when receiving data.

Signed-off-by: 0hax <0hax@protonmail.com>

* uart: support begin and end methods.

A component may need to reset uart buffer/status by using begin() and
end() methods. This is useful for example when a component needs to be
sure it is not reading garbage from previously received data over uart.
For end() methods with software serial, disabling interrupt is
currently impossible because of a bug in esp8266 Core:
https://github.com/esp8266/Arduino/issues/6049

Signed-off-by: 0hax <0hax@protonmail.com>

* esphal: add support for detaching an interrupt.

That's needed when a component needs to enable/disable interrupt on a
gpio.

Signed-off-by: 0hax <0hax@protonmail.com>

* uart: rename CONF_NR_BITS to CONF_DATA_BITS_NUMBER.

Signed-off-by: 0hax <0hax@protonmail.com>

* uart: use static const uint32_t instead of #define.

Signed-off-by: 0hax <0hax@protonmail.com>

* uart: use an enum to handle parity.

Signed-off-by: 0hax <0hax@protonmail.com>

* uart: split between esp32 and esp8266.

Signed-off-by: 0hax <0hax@protonmail.com>

* uart: check_uart_settings for parity and number of data bits.

Signed-off-by: 0hax <0hax@protonmail.com>

* name param data_bits

* add new params to test

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-05-24 18:59:07 -03:00
Oskar Napieraj
4de44a99eb
Add support for ESP32 DAC (#1071)
* Add support for ESP32 onboard DAC

* Newlines

* Tests
2020-05-24 00:06:55 -03:00
Chris Talkington
39fbf9c56f
expose mac address via discovery (#1038) 2020-05-23 22:53:15 -03:00
krahabb
021055f0b8
Added auto discovery and setup to Dallas Platform (#1028)
* Added auto discovery and setup to Dallas Platform

* Added auto discovery and setup to Dallas Platform

* Added auto discovery and setup to Dallas Platform

* Added auto discovery and setup to Dallas Platform

* Added auto discovery and setup to Dallas Platform
2020-05-23 21:52:29 -03:00
Niklas Wagner
c2e0ea97d8
Upgrade dependencies 2020-05-23 20:33:58 -03:00
Jozef Zuzelka
153aadadae
Ble scanner (#976)
* Added ble_scanner component

* ble_scanner: time.h changed to ctime

* ble_scanner: Test added.

* ble_scanner: fixed code formatting.

* Removed duplicate binary sensor tests from test2 and test3 to decrease memory requirements.

* Removed another duplicate test from test2.yaml and moved stepper test to yaml3.yaml to reduce memory requirements of test2.yaml.

* Reverted the last stepper test change

* Moved some sensor tests from test2.yaml to test3.yaml to save memory.

* Moved ruuvitag back to test2.yaml as it requires component esp32_ble_tracker.

* removed apds9960 as it is duplicated

Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2020-05-19 21:13:50 -03:00
Jesse Hills
1319ff1129
Add lambda to devcontainer config (#1059) 2020-05-19 21:02:10 -03:00