Jesse Hills
dbcfa7b599
Remove duplicated const data in esp8266 boards ( #2740 )
2021-11-17 16:22:38 +13:00
rotarykite
df68403b6d
Fix senseair component uart read timeout ( #2658 )
...
Co-authored-by: DAVe3283 <DAVe3283+GitHub@gmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Chua Jun Chieh <junchieh.chua@softspace.com.my>
2021-11-17 07:57:03 +13:00
Ryan Hoffman
57bdc2b885
Add ble_client binary_output ( #2200 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-17 07:30:42 +13:00
Ryan Hoffman
f565ff5def
Use as_reversed_hex_array in ble_sensor to fix UUID parsing ( #2737 )
...
#1627 renamed as_hex_array to as_reversed_hex_array but forgot to rename these users.
2021-11-16 18:53:36 +01:00
H. Árkosi Róbert
8ece639987
Change log level from DEBUG to INFO for sniffing services ( #2736 )
...
Sniffing for codes only happens if the user deliberately asked for it with the related service through HA - to find out the codes present in the air. The resulted data shouldn't be printed out only in debug mode, as this is information required to be known on demand for later use, not actually a debug info. Changing log level from DEBUG to INFO for sniffing services has two benefits:
- no need to run firmware with DEBUG enabled for occasional sniffing with devices in production (no need to flash back and forth with different log levels set just for this reason)
- if the user still wants DEBUG enabled, sniffed data appears in different color, it's easier to find between the lines.
2021-11-16 23:28:12 +13:00
Jan Harkes
b35f509784
Allow for subsecond sampling of hmc5883l ( #2735 )
2021-11-16 09:16:43 +01:00
Jesse Hills
f1954df573
Fix zeroconf time comparisons ( #2733 )
...
Co-authored-by: J. Nick Koston <nick@koston.org>
2021-11-16 12:47:06 +13:00
Jesse Hills
9e4fa5dcf1
Improv serial/checksum changes ( #2731 )
...
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
2021-11-16 11:02:45 +13:00
Jesse Hills
0809673ba9
Add zeroconf as a direct dependency and lock the version ( #2729 )
2021-11-16 09:53:52 +13:00
cvwillegen
b386284180
Ignore secrets.yaml on command line ( #2715 )
2021-11-15 20:06:55 +01:00
Krzysztof Białek
515519bc87
Provide an option to select MQTT unique_id generator ( #2701 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-15 15:49:18 +01:00
Oxan van Leeuwen
5404163be0
Clean-up MAC address helpers ( #2713 )
2021-11-15 15:48:16 +01:00
Alexandre-Jacques St-Jacques
0b193eee43
Remove unnecessary duplicate touch_pad_filter_start ( #2724 )
2021-11-15 11:58:22 +13:00
Jesse Hills
7333123ba4
Fix indentation of write_lambda for modbus_controller number ( #2722 )
2021-11-15 10:59:48 +13:00
Sergey V. DUDANOV
d99c5ed890
RemoteTransmitter fix. Bug from version 2021.10. Some changes. ( #2706 )
2021-11-15 10:40:35 +13:00
Oxan van Leeuwen
04740fbcbb
Install test requirements in lint Docker image ( #2719 )
2021-11-15 10:04:43 +13:00
Oxan van Leeuwen
6a7440f7d3
Feed WDT between doing ESP32 touchpad measurements ( #2720 )
2021-11-15 09:45:25 +13:00
Oxan van Leeuwen
14299bb2cc
Drop unused constants from const.py ( #2718 )
2021-11-15 08:07:58 +13:00
Oxan van Leeuwen
66cebfc992
Restore InterruptLock on wifi-less ESP8266 ( #2712 )
2021-11-15 08:05:11 +13:00
Maurice Makaay
108b8e6705
Fix rom/rtc.h deprecation compile warning for debug component ( #2520 )
2021-11-14 16:17:13 +01:00
Clifford Roche
4eaa6afa4d
Add greeyac protocol to IR Climate / HeatpumpIR ( #2694 )
2021-11-14 16:11:21 +01:00
Krzysztof Białek
f643a46bbf
Allow setting custom command_topic for Select and Number components ( #2714 )
2021-11-14 14:59:34 +01:00
Sergey V. DUDANOV
aae63a7ff3
Add climate on_state trigger ( #2707 )
2021-11-13 15:42:15 +01:00
NeoAcheron
582567696e
pmsx003: add support for PMS5003S device ( #2710 )
2021-11-13 15:14:23 +01:00
Jesse Hills
2e0c89409d
Bump ESPAsyncWebServer to 2.1.0 ( #2686 )
2021-11-13 21:22:32 +13:00
lcavalli
7bb7456a8b
Update device classes for binary sensors ( #2703 )
2021-11-12 13:17:10 +13:00
Jesse Hills
0372e12b81
Defines tidy ( #2696 )
...
* Move webserver defines inside arduino block
* Move esp8266 flash define
* Move prometheus define
2021-11-11 10:56:54 +01:00
Jesse Hills
a6873c1520
Only allow prometheus when using arduino ( #2697 )
2021-11-11 10:56:35 +01:00
Jesse Hills
f11220da3a
Remove my.ha links from improv ( #2695 )
2021-11-11 15:15:37 +13:00
Oxan van Leeuwen
bb9793d5b7
Enable addressable light power supply based on raw values ( #2690 )
2021-11-11 11:53:25 +13:00
Maurice Makaay
e99af991ec
Uart debugging support ( #2478 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 11:34:17 +13:00
Carlos Garcia Saura
abf3708cc2
[remote_transmitter] accurate pulse timing for ESP8266 ( #2476 )
2021-11-11 11:28:45 +13:00
Jesse Hills
4395d6156d
Fix template number initial value being NaN ( #2692 )
2021-11-10 23:24:48 +01:00
Jesse Hills
04ba53c870
Bump version to 2021.12.0-dev
2021-11-11 10:10:05 +13:00
anatoly-savchenkov
f310cacd41
[ms5611] Re-implement conversion from ADC readings to sensor values ( #2665 )
2021-11-10 22:01:47 +01:00
Jesse Hills
5ff7c8418c
Implement Improv via Serial component ( #2423 )
...
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
2021-11-11 08:55:45 +13:00
Laszlo Gazdag
0bdb48bcac
Make OTA function switchable in web_server component ( #2685 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 08:31:22 +13:00
Oxan van Leeuwen
99c775d8cb
Introduce encode_value/decode_value() template functions ( #2662 )
2021-11-10 19:44:01 +01:00
Oxan van Leeuwen
4d43396835
Clean-up string sanitation helpers ( #2660 )
2021-11-10 19:42:41 +01:00
TVDLoewe
92321e219a
Max7219digit multiline ( #1622 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 07:41:04 +13:00
Oxan van Leeuwen
c422b2fb0b
Introduce byteswap helpers ( #2661 )
...
* Backport std::byteswap() in helpers.h
* Introduce convert_big_endian() function
* Use convert_big_endian() in i2c byte swap functions
2021-11-10 19:40:18 +01:00
Otto Winter
8aa72f4c1e
Neopixelbus redo method definitions ( #2616 )
2021-11-11 07:35:31 +13:00
Oxan van Leeuwen
d8e33c5a69
Add repeat action for automations ( #2538 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 07:30:07 +13:00
Oxan van Leeuwen
15f9677d33
Introduce parse_number() helper function ( #2659 )
2021-11-11 07:15:06 +13:00
Carlos Garcia Saura
219b225ac0
[ESP32 ADC] Add option for raw uncalibrated output ( #2663 )
2021-11-10 19:12:57 +01:00
Oxan van Leeuwen
2ac232e634
Add missing hal.h include in esp32_camera_web_server ( #2689 )
2021-11-10 19:09:10 +01:00
Sam Hughes
710866ff4e
CAP1188 Capacitive Touch Sensor Support ( #2653 )
2021-11-10 18:52:49 +01:00
Martin
662773b075
modbus_controller: remove hard coded register size ( #2654 )
2021-11-10 16:24:44 +13:00
Carlos Garcia Saura
875b803483
Remove "delay_microseconds_accurate()" and improve systemwide delayMicroseconds() ( #2497 )
2021-11-10 16:22:00 +13:00
Guillermo Ruffino
6e5cfac927
fix rc switch protocol 6 ( #2672 )
2021-11-10 16:15:15 +13:00
