#include "tlc59208f_output.h"
#include "esphome/core/log.h"
#include "esphome/core/helpers.h"
#include "esphome/core/hal.h"

namespace esphome {
namespace tlc59208f {

static const char *const TAG = "tlc59208f";

// * marks register defaults
// 0*: Register auto increment disabled, 1: Register auto increment enabled
const uint8_t TLC59208F_MODE1_AI2 = (1 << 7);
// 0*: don't auto increment bit 1, 1: auto increment bit 1
const uint8_t TLC59208F_MODE1_AI1 = (1 << 6);
// 0*: don't auto increment bit 0, 1: auto increment bit 0
const uint8_t TLC59208F_MODE1_AI0 = (1 << 5);
// 0: normal mode, 1*: low power mode, osc off
const uint8_t TLC59208F_MODE1_SLEEP = (1 << 4);
// 0*: device doesn't respond to i2c bus sub-address 1, 1: responds
const uint8_t TLC59208F_MODE1_SUB1 = (1 << 3);
// 0*: device doesn't respond to i2c bus sub-address 2, 1: responds
const uint8_t TLC59208F_MODE1_SUB2 = (1 << 2);
// 0*: device doesn't respond to i2c bus sub-address 3, 1: responds
const uint8_t TLC59208F_MODE1_SUB3 = (1 << 1);
// 0: device doesn't respond to i2c all-call 3, 1*: responds to all-call
const uint8_t TLC59208F_MODE1_ALLCALL = (1 << 0);

// 0*: Group dimming, 1: Group blinking
const uint8_t TLC59208F_MODE2_DMBLNK = (1 << 5);
// 0*: Output change on Stop command, 1: Output change on ACK
const uint8_t TLC59208F_MODE2_OCH = (1 << 3);
// 0*: WDT disabled, 1: WDT enabled
const uint8_t TLC59208F_MODE2_WDTEN = (1 << 2);
// WDT timeouts
const uint8_t TLC59208F_MODE2_WDT_5MS = (0 << 0);
const uint8_t TLC59208F_MODE2_WDT_15MS = (1 << 0);
const uint8_t TLC59208F_MODE2_WDT_25MS = (2 << 0);
const uint8_t TLC59208F_MODE2_WDT_35MS = (3 << 0);

// --- Special function ---
// Call address to perform software reset, no devices will ACK
const uint8_t TLC59208F_SWRST_ADDR = 0x96;  //(0x4b 7-bit addr + ~W)
const uint8_t TLC59208F_SWRST_SEQ[2] = {0xa5, 0x5a};

// --- Registers ---2
// Mode register 1
const uint8_t TLC59208F_REG_MODE1 = 0x00;
// Mode register 2
const uint8_t TLC59208F_REG_MODE2 = 0x01;
// PWM0
const uint8_t TLC59208F_REG_PWM0 = 0x02;
// Group PWM
const uint8_t TLC59208F_REG_GROUPPWM = 0x0a;
// Group Freq
const uint8_t TLC59208F_REG_GROUPFREQ = 0x0b;
// LEDOUTx registers
const uint8_t TLC59208F_REG_LEDOUT0 = 0x0c;
const uint8_t TLC59208F_REG_LEDOUT1 = 0x0d;
// Sub-address registers
const uint8_t TLC59208F_REG_SUBADR1 = 0x0e;  // default: 0x92 (8-bit addr)
const uint8_t TLC59208F_REG_SUBADR2 = 0x0f;  // default: 0x94 (8-bit addr)
const uint8_t TLC59208F_REG_SUBADR3 = 0x10;  // default: 0x98 (8-bit addr)
// All call address register
const uint8_t TLC59208F_REG_ALLCALLADR = 0x11;  // default: 0xd0 (8-bit addr)

// --- Output modes ---
static const uint8_t LDR_OFF = 0x00;
static const uint8_t LDR_ON = 0x01;
static const uint8_t LDR_PWM = 0x02;
static const uint8_t LDR_GRPPWM = 0x03;

void TLC59208FOutput::setup() {
  ESP_LOGCONFIG(TAG, "Setting up TLC59208FOutputComponent...");

  ESP_LOGV(TAG, "  Resetting all devices on the bus...");

  // Reset all devices on the bus
  if (this->bus_->write(TLC59208F_SWRST_ADDR >> 1, TLC59208F_SWRST_SEQ, 2) != i2c::ERROR_OK) {
    ESP_LOGE(TAG, "RESET failed");
    this->mark_failed();
    return;
  }

  // Auto increment registers, and respond to all-call address
  if (!this->write_byte(TLC59208F_REG_MODE1, TLC59208F_MODE1_AI2 | TLC59208F_MODE1_ALLCALL)) {
    ESP_LOGE(TAG, "MODE1 failed");
    this->mark_failed();
    return;
  }
  if (!this->write_byte(TLC59208F_REG_MODE2, this->mode_)) {
    ESP_LOGE(TAG, "MODE2 failed");
    this->mark_failed();
    return;
  }
  // Set all 3 outputs to be individually controlled
  // TODO: think of a way to support group dimming
  if (!this->write_byte(TLC59208F_REG_LEDOUT0, (LDR_PWM << 6) | (LDR_PWM << 4) | (LDR_PWM << 2) | (LDR_PWM << 0))) {
    ESP_LOGE(TAG, "LEDOUT0 failed");
    this->mark_failed();
    return;
  }
  if (!this->write_byte(TLC59208F_REG_LEDOUT1, (LDR_PWM << 6) | (LDR_PWM << 4) | (LDR_PWM << 2) | (LDR_PWM << 0))) {
    ESP_LOGE(TAG, "LEDOUT1 failed");
    this->mark_failed();
    return;
  }
  delayMicroseconds(500);

  this->loop();
}

void TLC59208FOutput::dump_config() {
  ESP_LOGCONFIG(TAG, "TLC59208F:");
  ESP_LOGCONFIG(TAG, "  Mode: 0x%02X", this->mode_);

  if (this->is_failed()) {
    ESP_LOGE(TAG, "Setting up TLC59208F failed!");
  }
}

void TLC59208FOutput::loop() {
  if (this->min_channel_ == 0xFF || !this->update_)
    return;

  for (uint8_t channel = this->min_channel_; channel <= this->max_channel_; channel++) {
    uint8_t pwm = this->pwm_amounts_[channel];
    ESP_LOGVV(TAG, "Channel %02u: pwm=%04u ", channel, pwm);

    uint8_t reg = TLC59208F_REG_PWM0 + channel;
    if (!this->write_byte(reg, pwm)) {
      this->status_set_warning();
      return;
    }
  }

  this->status_clear_warning();
  this->update_ = false;
}

void TLC59208FOutput::register_channel(TLC59208FChannel *channel) {
  auto c = channel->channel_;
  this->min_channel_ = std::min(this->min_channel_, c);
  this->max_channel_ = std::max(this->max_channel_, c);
  channel->set_parent(this);
}

void TLC59208FChannel::write_state(float state) {
  const uint8_t max_duty = 255;
  const float duty_rounded = roundf(state * max_duty);
  auto duty = static_cast<uint8_t>(duty_rounded);
  this->parent_->set_channel_value_(this->channel_, duty);
}

}  // namespace tlc59208f
}  // namespace esphome