import esphome.codegen as cg import esphome.config_validation as cv from esphome import automation from esphome.components import climate, sensor from esphome.const import ( CONF_AUTO_MODE, CONF_AWAY_CONFIG, CONF_COOL_ACTION, CONF_COOL_DEADBAND, CONF_COOL_MODE, CONF_COOL_OVERRUN, CONF_DEFAULT_MODE, CONF_DEFAULT_TARGET_TEMPERATURE_HIGH, CONF_DEFAULT_TARGET_TEMPERATURE_LOW, CONF_DRY_ACTION, CONF_DRY_MODE, CONF_FAN_MODE_ON_ACTION, CONF_FAN_MODE_OFF_ACTION, CONF_FAN_MODE_AUTO_ACTION, CONF_FAN_MODE_LOW_ACTION, CONF_FAN_MODE_MEDIUM_ACTION, CONF_FAN_MODE_HIGH_ACTION, CONF_FAN_MODE_MIDDLE_ACTION, CONF_FAN_MODE_FOCUS_ACTION, CONF_FAN_MODE_DIFFUSE_ACTION, CONF_FAN_ONLY_ACTION, CONF_FAN_ONLY_ACTION_USES_FAN_MODE_TIMER, CONF_FAN_ONLY_COOLING, CONF_FAN_ONLY_MODE, CONF_FAN_WITH_COOLING, CONF_FAN_WITH_HEATING, CONF_HEAT_ACTION, CONF_HEAT_DEADBAND, CONF_HEAT_MODE, CONF_HEAT_OVERRUN, CONF_ID, CONF_IDLE_ACTION, CONF_MAX_COOLING_RUN_TIME, CONF_MAX_HEATING_RUN_TIME, CONF_MIN_COOLING_OFF_TIME, CONF_MIN_COOLING_RUN_TIME, CONF_MIN_FAN_MODE_SWITCHING_TIME, CONF_MIN_FANNING_OFF_TIME, CONF_MIN_FANNING_RUN_TIME, CONF_MIN_HEATING_OFF_TIME, CONF_MIN_HEATING_RUN_TIME, CONF_MIN_IDLE_TIME, CONF_OFF_MODE, CONF_SENSOR, CONF_SET_POINT_MINIMUM_DIFFERENTIAL, CONF_STARTUP_DELAY, CONF_SUPPLEMENTAL_COOLING_ACTION, CONF_SUPPLEMENTAL_COOLING_DELTA, CONF_SUPPLEMENTAL_HEATING_ACTION, CONF_SUPPLEMENTAL_HEATING_DELTA, CONF_SWING_BOTH_ACTION, CONF_SWING_HORIZONTAL_ACTION, CONF_SWING_OFF_ACTION, CONF_SWING_VERTICAL_ACTION, CONF_TARGET_TEMPERATURE_CHANGE_ACTION, ) CODEOWNERS = ["@kbx81"] climate_ns = cg.esphome_ns.namespace("climate") thermostat_ns = cg.esphome_ns.namespace("thermostat") ThermostatClimate = thermostat_ns.class_( "ThermostatClimate", climate.Climate, cg.Component ) ThermostatClimateTargetTempConfig = thermostat_ns.struct( "ThermostatClimateTargetTempConfig" ) ClimateMode = climate_ns.enum("ClimateMode") CLIMATE_MODES = { "OFF": ClimateMode.CLIMATE_MODE_OFF, "HEAT_COOL": ClimateMode.CLIMATE_MODE_HEAT_COOL, "COOL": ClimateMode.CLIMATE_MODE_COOL, "HEAT": ClimateMode.CLIMATE_MODE_HEAT, "DRY": ClimateMode.CLIMATE_MODE_DRY, "FAN_ONLY": ClimateMode.CLIMATE_MODE_FAN_ONLY, "AUTO": ClimateMode.CLIMATE_MODE_AUTO, } validate_climate_mode = cv.enum(CLIMATE_MODES, upper=True) def validate_thermostat(config): # verify corresponding action(s) exist(s) for any defined climate mode or action requirements = { CONF_AUTO_MODE: [ CONF_COOL_ACTION, CONF_HEAT_ACTION, CONF_MIN_COOLING_OFF_TIME, CONF_MIN_COOLING_RUN_TIME, CONF_MIN_HEATING_OFF_TIME, CONF_MIN_HEATING_RUN_TIME, ], CONF_COOL_MODE: [ CONF_COOL_ACTION, CONF_MIN_COOLING_OFF_TIME, CONF_MIN_COOLING_RUN_TIME, ], CONF_DRY_MODE: [ CONF_DRY_ACTION, CONF_MIN_COOLING_OFF_TIME, CONF_MIN_COOLING_RUN_TIME, ], CONF_FAN_ONLY_MODE: [ CONF_FAN_ONLY_ACTION, ], CONF_HEAT_MODE: [ CONF_HEAT_ACTION, CONF_MIN_HEATING_OFF_TIME, CONF_MIN_HEATING_RUN_TIME, ], CONF_COOL_ACTION: [ CONF_MIN_COOLING_OFF_TIME, CONF_MIN_COOLING_RUN_TIME, ], CONF_DRY_ACTION: [ CONF_MIN_COOLING_OFF_TIME, CONF_MIN_COOLING_RUN_TIME, ], CONF_HEAT_ACTION: [ CONF_MIN_HEATING_OFF_TIME, CONF_MIN_HEATING_RUN_TIME, ], CONF_SUPPLEMENTAL_COOLING_ACTION: [ CONF_COOL_ACTION, CONF_MAX_COOLING_RUN_TIME, CONF_MIN_COOLING_OFF_TIME, CONF_MIN_COOLING_RUN_TIME, CONF_SUPPLEMENTAL_COOLING_DELTA, ], CONF_SUPPLEMENTAL_HEATING_ACTION: [ CONF_HEAT_ACTION, CONF_MAX_HEATING_RUN_TIME, CONF_MIN_HEATING_OFF_TIME, CONF_MIN_HEATING_RUN_TIME, CONF_SUPPLEMENTAL_HEATING_DELTA, ], CONF_MAX_COOLING_RUN_TIME: [ CONF_COOL_ACTION, CONF_SUPPLEMENTAL_COOLING_ACTION, CONF_SUPPLEMENTAL_COOLING_DELTA, ], CONF_MAX_HEATING_RUN_TIME: [ CONF_HEAT_ACTION, CONF_SUPPLEMENTAL_HEATING_ACTION, CONF_SUPPLEMENTAL_HEATING_DELTA, ], CONF_MIN_COOLING_OFF_TIME: [ CONF_COOL_ACTION, ], CONF_MIN_COOLING_RUN_TIME: [ CONF_COOL_ACTION, ], CONF_MIN_FANNING_OFF_TIME: [ CONF_FAN_ONLY_ACTION, ], CONF_MIN_FANNING_RUN_TIME: [ CONF_FAN_ONLY_ACTION, ], CONF_MIN_HEATING_OFF_TIME: [ CONF_HEAT_ACTION, ], CONF_MIN_HEATING_RUN_TIME: [ CONF_HEAT_ACTION, ], CONF_SUPPLEMENTAL_COOLING_DELTA: [ CONF_COOL_ACTION, CONF_MAX_COOLING_RUN_TIME, CONF_SUPPLEMENTAL_COOLING_ACTION, ], CONF_SUPPLEMENTAL_HEATING_DELTA: [ CONF_HEAT_ACTION, CONF_MAX_HEATING_RUN_TIME, CONF_SUPPLEMENTAL_HEATING_ACTION, ], } for config_trigger, req_triggers in requirements.items(): for req_trigger in req_triggers: if config_trigger in config and req_trigger not in config: raise cv.Invalid( f"{req_trigger} must be defined to use {config_trigger}" ) if CONF_FAN_ONLY_ACTION in config: # determine validation requirements based on fan_only_action_uses_fan_mode_timer setting if config[CONF_FAN_ONLY_ACTION_USES_FAN_MODE_TIMER] is True: requirements = [CONF_MIN_FAN_MODE_SWITCHING_TIME] else: requirements = [ CONF_MIN_FANNING_OFF_TIME, CONF_MIN_FANNING_RUN_TIME, ] for config_req_action in requirements: if config_req_action not in config: raise cv.Invalid( f"{config_req_action} must be defined to use {CONF_FAN_ONLY_ACTION}" ) # for any fan_mode action, confirm min_fan_mode_switching_time is defined requirements = { CONF_MIN_FAN_MODE_SWITCHING_TIME: [ CONF_FAN_MODE_ON_ACTION, CONF_FAN_MODE_OFF_ACTION, CONF_FAN_MODE_AUTO_ACTION, CONF_FAN_MODE_LOW_ACTION, CONF_FAN_MODE_MEDIUM_ACTION, CONF_FAN_MODE_HIGH_ACTION, CONF_FAN_MODE_MIDDLE_ACTION, CONF_FAN_MODE_FOCUS_ACTION, CONF_FAN_MODE_DIFFUSE_ACTION, ], } for req_config_item, config_triggers in requirements.items(): for config_trigger in config_triggers: if config_trigger in config and req_config_item not in config: raise cv.Invalid( f"{req_config_item} must be defined to use {config_trigger}" ) # determine validation requirements based on fan_only_cooling setting if config[CONF_FAN_ONLY_COOLING] is True: requirements = { CONF_DEFAULT_TARGET_TEMPERATURE_HIGH: [ CONF_COOL_ACTION, CONF_FAN_ONLY_ACTION, ], CONF_DEFAULT_TARGET_TEMPERATURE_LOW: [CONF_HEAT_ACTION], } else: requirements = { CONF_DEFAULT_TARGET_TEMPERATURE_HIGH: [CONF_COOL_ACTION], CONF_DEFAULT_TARGET_TEMPERATURE_LOW: [CONF_HEAT_ACTION], } for config_temp, req_actions in requirements.items(): for req_action in req_actions: # verify corresponding default target temperature exists when a given climate action exists if config_temp not in config and req_action in config: raise cv.Invalid( f"{config_temp} must be defined when using {req_action}" ) # if a given climate action is NOT defined, it should not have a default target temperature if config_temp in config and req_action not in config: raise cv.Invalid(f"{config_temp} is defined with no {req_action}") if CONF_AWAY_CONFIG in config: away = config[CONF_AWAY_CONFIG] for config_temp, req_actions in requirements.items(): for req_action in req_actions: # verify corresponding default target temperature exists when a given climate action exists if config_temp not in away and req_action in config: raise cv.Invalid( f"{config_temp} must be defined in away configuration when using {req_action}" ) # if a given climate action is NOT defined, it should not have a default target temperature if config_temp in away and req_action not in config: raise cv.Invalid( f"{config_temp} is defined in away configuration with no {req_action}" ) # verify default climate mode is valid given above configuration default_mode = config[CONF_DEFAULT_MODE] requirements = { "HEAT_COOL": [CONF_COOL_ACTION, CONF_HEAT_ACTION], "COOL": [CONF_COOL_ACTION], "HEAT": [CONF_HEAT_ACTION], "DRY": [CONF_DRY_ACTION], "FAN_ONLY": [CONF_FAN_ONLY_ACTION], "AUTO": [CONF_COOL_ACTION, CONF_HEAT_ACTION], }.get(default_mode, []) for req in requirements: if req not in config: raise cv.Invalid( f"{CONF_DEFAULT_MODE} is set to {default_mode} but {req} is not present in the configuration" ) if config[CONF_FAN_WITH_COOLING] is True and CONF_FAN_ONLY_ACTION not in config: raise cv.Invalid( f"{CONF_FAN_ONLY_ACTION} must be defined to use {CONF_FAN_WITH_COOLING}" ) if config[CONF_FAN_WITH_HEATING] is True and CONF_FAN_ONLY_ACTION not in config: raise cv.Invalid( f"{CONF_FAN_ONLY_ACTION} must be defined to use {CONF_FAN_WITH_HEATING}" ) # if min_fan_mode_switching_time is defined, at least one fan_mode action should be defined if CONF_MIN_FAN_MODE_SWITCHING_TIME in config: requirements = [ CONF_FAN_MODE_ON_ACTION, CONF_FAN_MODE_OFF_ACTION, CONF_FAN_MODE_AUTO_ACTION, CONF_FAN_MODE_LOW_ACTION, CONF_FAN_MODE_MEDIUM_ACTION, CONF_FAN_MODE_HIGH_ACTION, CONF_FAN_MODE_MIDDLE_ACTION, CONF_FAN_MODE_FOCUS_ACTION, CONF_FAN_MODE_DIFFUSE_ACTION, ] for config_req_action in requirements: if config_req_action in config: return config raise cv.Invalid( f"At least one of {CONF_FAN_MODE_ON_ACTION}, {CONF_FAN_MODE_OFF_ACTION}, {CONF_FAN_MODE_AUTO_ACTION}, {CONF_FAN_MODE_LOW_ACTION}, {CONF_FAN_MODE_MEDIUM_ACTION}, {CONF_FAN_MODE_HIGH_ACTION}, {CONF_FAN_MODE_MIDDLE_ACTION}, {CONF_FAN_MODE_FOCUS_ACTION}, {CONF_FAN_MODE_DIFFUSE_ACTION} must be defined to use {CONF_MIN_FAN_MODE_SWITCHING_TIME}" ) return config CONFIG_SCHEMA = cv.All( climate.CLIMATE_SCHEMA.extend( { cv.GenerateID(): cv.declare_id(ThermostatClimate), cv.Required(CONF_SENSOR): cv.use_id(sensor.Sensor), cv.Required(CONF_IDLE_ACTION): automation.validate_automation(single=True), cv.Optional(CONF_COOL_ACTION): automation.validate_automation(single=True), cv.Optional( CONF_SUPPLEMENTAL_COOLING_ACTION ): automation.validate_automation(single=True), cv.Optional(CONF_DRY_ACTION): automation.validate_automation(single=True), cv.Optional(CONF_FAN_ONLY_ACTION): automation.validate_automation( single=True ), cv.Optional(CONF_HEAT_ACTION): automation.validate_automation(single=True), cv.Optional( CONF_SUPPLEMENTAL_HEATING_ACTION ): automation.validate_automation(single=True), cv.Optional(CONF_AUTO_MODE): automation.validate_automation(single=True), cv.Optional(CONF_COOL_MODE): automation.validate_automation(single=True), cv.Optional(CONF_DRY_MODE): automation.validate_automation(single=True), cv.Optional(CONF_FAN_ONLY_MODE): automation.validate_automation( single=True ), cv.Optional(CONF_HEAT_MODE): automation.validate_automation(single=True), cv.Optional(CONF_OFF_MODE): automation.validate_automation(single=True), cv.Optional(CONF_FAN_MODE_ON_ACTION): automation.validate_automation( single=True ), cv.Optional(CONF_FAN_MODE_OFF_ACTION): automation.validate_automation( single=True ), cv.Optional(CONF_FAN_MODE_AUTO_ACTION): automation.validate_automation( single=True ), cv.Optional(CONF_FAN_MODE_LOW_ACTION): automation.validate_automation( single=True ), cv.Optional(CONF_FAN_MODE_MEDIUM_ACTION): automation.validate_automation( single=True ), cv.Optional(CONF_FAN_MODE_HIGH_ACTION): automation.validate_automation( single=True ), cv.Optional(CONF_FAN_MODE_MIDDLE_ACTION): automation.validate_automation( single=True ), cv.Optional(CONF_FAN_MODE_FOCUS_ACTION): automation.validate_automation( single=True ), cv.Optional(CONF_FAN_MODE_DIFFUSE_ACTION): automation.validate_automation( single=True ), cv.Optional(CONF_SWING_BOTH_ACTION): automation.validate_automation( single=True ), cv.Optional(CONF_SWING_HORIZONTAL_ACTION): automation.validate_automation( single=True ), cv.Optional(CONF_SWING_OFF_ACTION): automation.validate_automation( single=True ), cv.Optional(CONF_SWING_VERTICAL_ACTION): automation.validate_automation( single=True ), cv.Optional( CONF_TARGET_TEMPERATURE_CHANGE_ACTION ): automation.validate_automation(single=True), cv.Optional(CONF_DEFAULT_MODE, default="OFF"): cv.templatable( validate_climate_mode ), cv.Optional(CONF_DEFAULT_TARGET_TEMPERATURE_HIGH): cv.temperature, cv.Optional(CONF_DEFAULT_TARGET_TEMPERATURE_LOW): cv.temperature, cv.Optional( CONF_SET_POINT_MINIMUM_DIFFERENTIAL, default=0.5 ): cv.temperature, cv.Optional(CONF_COOL_DEADBAND, default=0.5): cv.temperature, cv.Optional(CONF_COOL_OVERRUN, default=0.5): cv.temperature, cv.Optional(CONF_HEAT_DEADBAND, default=0.5): cv.temperature, cv.Optional(CONF_HEAT_OVERRUN, default=0.5): cv.temperature, cv.Optional(CONF_MAX_COOLING_RUN_TIME): cv.positive_time_period_seconds, cv.Optional(CONF_MAX_HEATING_RUN_TIME): cv.positive_time_period_seconds, cv.Optional(CONF_MIN_COOLING_OFF_TIME): cv.positive_time_period_seconds, cv.Optional(CONF_MIN_COOLING_RUN_TIME): cv.positive_time_period_seconds, cv.Optional( CONF_MIN_FAN_MODE_SWITCHING_TIME ): cv.positive_time_period_seconds, cv.Optional(CONF_MIN_FANNING_OFF_TIME): cv.positive_time_period_seconds, cv.Optional(CONF_MIN_FANNING_RUN_TIME): cv.positive_time_period_seconds, cv.Optional(CONF_MIN_HEATING_OFF_TIME): cv.positive_time_period_seconds, cv.Optional(CONF_MIN_HEATING_RUN_TIME): cv.positive_time_period_seconds, cv.Required(CONF_MIN_IDLE_TIME): cv.positive_time_period_seconds, cv.Optional(CONF_SUPPLEMENTAL_COOLING_DELTA): cv.temperature, cv.Optional(CONF_SUPPLEMENTAL_HEATING_DELTA): cv.temperature, cv.Optional( CONF_FAN_ONLY_ACTION_USES_FAN_MODE_TIMER, default=False ): cv.boolean, cv.Optional(CONF_FAN_ONLY_COOLING, default=False): cv.boolean, cv.Optional(CONF_FAN_WITH_COOLING, default=False): cv.boolean, cv.Optional(CONF_FAN_WITH_HEATING, default=False): cv.boolean, cv.Optional(CONF_STARTUP_DELAY, default=False): cv.boolean, cv.Optional(CONF_AWAY_CONFIG): cv.Schema( { cv.Optional(CONF_DEFAULT_TARGET_TEMPERATURE_HIGH): cv.temperature, cv.Optional(CONF_DEFAULT_TARGET_TEMPERATURE_LOW): cv.temperature, } ), } ).extend(cv.COMPONENT_SCHEMA), cv.has_at_least_one_key( CONF_COOL_ACTION, CONF_DRY_ACTION, CONF_FAN_ONLY_ACTION, CONF_HEAT_ACTION ), validate_thermostat, ) async def to_code(config): var = cg.new_Pvariable(config[CONF_ID]) await cg.register_component(var, config) await climate.register_climate(var, config) heat_cool_mode_available = CONF_HEAT_ACTION in config and CONF_COOL_ACTION in config two_points_available = CONF_HEAT_ACTION in config and ( CONF_COOL_ACTION in config or (config[CONF_FAN_ONLY_COOLING] and CONF_FAN_ONLY_ACTION in config) ) sens = await cg.get_variable(config[CONF_SENSOR]) cg.add(var.set_default_mode(config[CONF_DEFAULT_MODE])) cg.add( var.set_set_point_minimum_differential( config[CONF_SET_POINT_MINIMUM_DIFFERENTIAL] ) ) cg.add(var.set_sensor(sens)) cg.add(var.set_cool_deadband(config[CONF_COOL_DEADBAND])) cg.add(var.set_cool_overrun(config[CONF_COOL_OVERRUN])) cg.add(var.set_heat_deadband(config[CONF_HEAT_DEADBAND])) cg.add(var.set_heat_overrun(config[CONF_HEAT_OVERRUN])) if two_points_available is True: cg.add(var.set_supports_two_points(True)) normal_config = ThermostatClimateTargetTempConfig( config[CONF_DEFAULT_TARGET_TEMPERATURE_LOW], config[CONF_DEFAULT_TARGET_TEMPERATURE_HIGH], ) elif CONF_DEFAULT_TARGET_TEMPERATURE_HIGH in config: cg.add(var.set_supports_two_points(False)) normal_config = ThermostatClimateTargetTempConfig( config[CONF_DEFAULT_TARGET_TEMPERATURE_HIGH] ) elif CONF_DEFAULT_TARGET_TEMPERATURE_LOW in config: cg.add(var.set_supports_two_points(False)) normal_config = ThermostatClimateTargetTempConfig( config[CONF_DEFAULT_TARGET_TEMPERATURE_LOW] ) if CONF_MAX_COOLING_RUN_TIME in config: cg.add( var.set_cooling_maximum_run_time_in_sec(config[CONF_MAX_COOLING_RUN_TIME]) ) if CONF_MAX_HEATING_RUN_TIME in config: cg.add( var.set_heating_maximum_run_time_in_sec(config[CONF_MAX_HEATING_RUN_TIME]) ) if CONF_MIN_COOLING_OFF_TIME in config: cg.add( var.set_cooling_minimum_off_time_in_sec(config[CONF_MIN_COOLING_OFF_TIME]) ) if CONF_MIN_COOLING_RUN_TIME in config: cg.add( var.set_cooling_minimum_run_time_in_sec(config[CONF_MIN_COOLING_RUN_TIME]) ) if CONF_MIN_FAN_MODE_SWITCHING_TIME in config: cg.add( var.set_fan_mode_minimum_switching_time_in_sec( config[CONF_MIN_FAN_MODE_SWITCHING_TIME] ) ) if CONF_MIN_FANNING_OFF_TIME in config: cg.add( var.set_fanning_minimum_off_time_in_sec(config[CONF_MIN_FANNING_OFF_TIME]) ) if CONF_MIN_FANNING_RUN_TIME in config: cg.add( var.set_fanning_minimum_run_time_in_sec(config[CONF_MIN_FANNING_RUN_TIME]) ) if CONF_MIN_HEATING_OFF_TIME in config: cg.add( var.set_heating_minimum_off_time_in_sec(config[CONF_MIN_HEATING_OFF_TIME]) ) if CONF_MIN_HEATING_RUN_TIME in config: cg.add( var.set_heating_minimum_run_time_in_sec(config[CONF_MIN_HEATING_RUN_TIME]) ) if CONF_SUPPLEMENTAL_COOLING_DELTA in config: cg.add(var.set_supplemental_cool_delta(config[CONF_SUPPLEMENTAL_COOLING_DELTA])) if CONF_SUPPLEMENTAL_HEATING_DELTA in config: cg.add(var.set_supplemental_heat_delta(config[CONF_SUPPLEMENTAL_HEATING_DELTA])) cg.add(var.set_idle_minimum_time_in_sec(config[CONF_MIN_IDLE_TIME])) cg.add( var.set_supports_fan_only_action_uses_fan_mode_timer( config[CONF_FAN_ONLY_ACTION_USES_FAN_MODE_TIMER] ) ) cg.add(var.set_supports_fan_only_cooling(config[CONF_FAN_ONLY_COOLING])) cg.add(var.set_supports_fan_with_cooling(config[CONF_FAN_WITH_COOLING])) cg.add(var.set_supports_fan_with_heating(config[CONF_FAN_WITH_HEATING])) cg.add(var.set_use_startup_delay(config[CONF_STARTUP_DELAY])) cg.add(var.set_normal_config(normal_config)) await automation.build_automation( var.get_idle_action_trigger(), [], config[CONF_IDLE_ACTION] ) if heat_cool_mode_available is True: cg.add(var.set_supports_heat_cool(True)) else: cg.add(var.set_supports_heat_cool(False)) if CONF_COOL_ACTION in config: await automation.build_automation( var.get_cool_action_trigger(), [], config[CONF_COOL_ACTION] ) cg.add(var.set_supports_cool(True)) if CONF_SUPPLEMENTAL_COOLING_ACTION in config: await automation.build_automation( var.get_supplemental_cool_action_trigger(), [], config[CONF_SUPPLEMENTAL_COOLING_ACTION], ) if CONF_DRY_ACTION in config: await automation.build_automation( var.get_dry_action_trigger(), [], config[CONF_DRY_ACTION] ) cg.add(var.set_supports_dry(True)) if CONF_FAN_ONLY_ACTION in config: await automation.build_automation( var.get_fan_only_action_trigger(), [], config[CONF_FAN_ONLY_ACTION] ) cg.add(var.set_supports_fan_only(True)) if CONF_HEAT_ACTION in config: await automation.build_automation( var.get_heat_action_trigger(), [], config[CONF_HEAT_ACTION] ) cg.add(var.set_supports_heat(True)) if CONF_SUPPLEMENTAL_HEATING_ACTION in config: await automation.build_automation( var.get_supplemental_heat_action_trigger(), [], config[CONF_SUPPLEMENTAL_HEATING_ACTION], ) if CONF_AUTO_MODE in config: await automation.build_automation( var.get_auto_mode_trigger(), [], config[CONF_AUTO_MODE] ) if CONF_COOL_MODE in config: await automation.build_automation( var.get_cool_mode_trigger(), [], config[CONF_COOL_MODE] ) cg.add(var.set_supports_cool(True)) if CONF_DRY_MODE in config: await automation.build_automation( var.get_dry_mode_trigger(), [], config[CONF_DRY_MODE] ) cg.add(var.set_supports_dry(True)) if CONF_FAN_ONLY_MODE in config: await automation.build_automation( var.get_fan_only_mode_trigger(), [], config[CONF_FAN_ONLY_MODE] ) cg.add(var.set_supports_fan_only(True)) if CONF_HEAT_MODE in config: await automation.build_automation( var.get_heat_mode_trigger(), [], config[CONF_HEAT_MODE] ) cg.add(var.set_supports_heat(True)) if CONF_OFF_MODE in config: await automation.build_automation( var.get_off_mode_trigger(), [], config[CONF_OFF_MODE] ) if CONF_FAN_MODE_ON_ACTION in config: await automation.build_automation( var.get_fan_mode_on_trigger(), [], config[CONF_FAN_MODE_ON_ACTION] ) cg.add(var.set_supports_fan_mode_on(True)) if CONF_FAN_MODE_OFF_ACTION in config: await automation.build_automation( var.get_fan_mode_off_trigger(), [], config[CONF_FAN_MODE_OFF_ACTION] ) cg.add(var.set_supports_fan_mode_off(True)) if CONF_FAN_MODE_AUTO_ACTION in config: await automation.build_automation( var.get_fan_mode_auto_trigger(), [], config[CONF_FAN_MODE_AUTO_ACTION] ) cg.add(var.set_supports_fan_mode_auto(True)) if CONF_FAN_MODE_LOW_ACTION in config: await automation.build_automation( var.get_fan_mode_low_trigger(), [], config[CONF_FAN_MODE_LOW_ACTION] ) cg.add(var.set_supports_fan_mode_low(True)) if CONF_FAN_MODE_MEDIUM_ACTION in config: await automation.build_automation( var.get_fan_mode_medium_trigger(), [], config[CONF_FAN_MODE_MEDIUM_ACTION] ) cg.add(var.set_supports_fan_mode_medium(True)) if CONF_FAN_MODE_HIGH_ACTION in config: await automation.build_automation( var.get_fan_mode_high_trigger(), [], config[CONF_FAN_MODE_HIGH_ACTION] ) cg.add(var.set_supports_fan_mode_high(True)) if CONF_FAN_MODE_MIDDLE_ACTION in config: await automation.build_automation( var.get_fan_mode_middle_trigger(), [], config[CONF_FAN_MODE_MIDDLE_ACTION] ) cg.add(var.set_supports_fan_mode_middle(True)) if CONF_FAN_MODE_FOCUS_ACTION in config: await automation.build_automation( var.get_fan_mode_focus_trigger(), [], config[CONF_FAN_MODE_FOCUS_ACTION] ) cg.add(var.set_supports_fan_mode_focus(True)) if CONF_FAN_MODE_DIFFUSE_ACTION in config: await automation.build_automation( var.get_fan_mode_diffuse_trigger(), [], config[CONF_FAN_MODE_DIFFUSE_ACTION] ) cg.add(var.set_supports_fan_mode_diffuse(True)) if CONF_SWING_BOTH_ACTION in config: await automation.build_automation( var.get_swing_mode_both_trigger(), [], config[CONF_SWING_BOTH_ACTION] ) cg.add(var.set_supports_swing_mode_both(True)) if CONF_SWING_HORIZONTAL_ACTION in config: await automation.build_automation( var.get_swing_mode_horizontal_trigger(), [], config[CONF_SWING_HORIZONTAL_ACTION], ) cg.add(var.set_supports_swing_mode_horizontal(True)) if CONF_SWING_OFF_ACTION in config: await automation.build_automation( var.get_swing_mode_off_trigger(), [], config[CONF_SWING_OFF_ACTION] ) cg.add(var.set_supports_swing_mode_off(True)) if CONF_SWING_VERTICAL_ACTION in config: await automation.build_automation( var.get_swing_mode_vertical_trigger(), [], config[CONF_SWING_VERTICAL_ACTION], ) cg.add(var.set_supports_swing_mode_vertical(True)) if CONF_TARGET_TEMPERATURE_CHANGE_ACTION in config: await automation.build_automation( var.get_temperature_change_trigger(), [], config[CONF_TARGET_TEMPERATURE_CHANGE_ACTION], ) if CONF_AWAY_CONFIG in config: away = config[CONF_AWAY_CONFIG] if two_points_available is True: away_config = ThermostatClimateTargetTempConfig( away[CONF_DEFAULT_TARGET_TEMPERATURE_LOW], away[CONF_DEFAULT_TARGET_TEMPERATURE_HIGH], ) elif CONF_DEFAULT_TARGET_TEMPERATURE_HIGH in away: away_config = ThermostatClimateTargetTempConfig( away[CONF_DEFAULT_TARGET_TEMPERATURE_HIGH] ) elif CONF_DEFAULT_TARGET_TEMPERATURE_LOW in away: away_config = ThermostatClimateTargetTempConfig( away[CONF_DEFAULT_TARGET_TEMPERATURE_LOW] ) cg.add(var.set_away_config(away_config))