esphome: name: $devicename platform: ESP32 board: nodemcu-32s build_path: build/test4 substitutions: devicename: test-4 ethernet: type: LAN8720 mdc_pin: GPIO23 mdio_pin: GPIO25 clk_mode: GPIO0_IN phy_addr: 0 power_pin: GPIO25 manual_ip: static_ip: 192.168.178.56 gateway: 192.168.178.1 subnet: 255.255.255.0 domain: .local api: i2c: sda: 21 scl: 22 scan: False spi: clk_pin: GPIO21 mosi_pin: GPIO22 miso_pin: GPIO23 uart: tx_pin: GPIO22 rx_pin: GPIO23 baud_rate: 115200 ota: safe_mode: True port: 3286 logger: level: DEBUG web_server: auth: username: admin password: admin time: - platform: sntp id: sntp_time tuya: time_id: sntp_time sensor: - platform: homeassistant entity_id: sensor.hello_world id: ha_hello_world - platform: tuya id: tuya_sensor sensor_datapoint: 1 # # platform sensor.apds9960 requires component apds9960 # # - platform: apds9960 # type: proximity # name: APDS9960 Proximity # - platform: apds9960 # type: clear # name: APDS9960 Clear # - platform: apds9960 # type: red # name: APDS9960 Red # - platform: apds9960 # type: green # name: APDS9960 Green # - platform: apds9960 # type: blue # name: APDS9960 Blue binary_sensor: - platform: tuya id: tuya_binary_sensor sensor_datapoint: 1 climate: - platform: tuya id: tuya_climate switch_datapoint: 1 target_temperature_datapoint: 3 current_temperature_multiplier: 0.5 target_temperature_multiplier: 0.5 switch: - platform: tuya id: tuya_switch switch_datapoint: 1 light: - platform: fastled_clockless id: led_matrix_32x8 name: "led_matrix_32x8" chipset: WS2812B pin: GPIO15 num_leds: 256 rgb_order: GRB default_transition_length: 0s color_correct: [50%, 50%, 50%] display: - platform: addressable_light id: led_matrix_32x8_display addressable_light_id: led_matrix_32x8 width: 32 height: 8 pixel_mapper: |- if (x % 2 == 0) { return (x * 8) + y; } return (x * 8) + (7 - y); lambda: |- Color red = Color(0xFF0000); Color green = Color(0x00FF00); Color blue = Color(0x0000FF); it.rectangle(0, 0, it.get_width(), it.get_height(), red); it.rectangle(1, 1, it.get_width()-2, it.get_height()-2, green); it.rectangle(2, 2, it.get_width()-4, it.get_height()-4, blue); it.rectangle(3, 3, it.get_width()-6, it.get_height()-6, red); rotation: 0° update_interval: 16ms - platform: waveshare_epaper cs_pin: GPIO23 dc_pin: GPIO23 busy_pin: GPIO23 reset_pin: GPIO23 model: 2.13in-ttgo-b1 full_update_every: 30 lambda: |- it.rectangle(0, 0, it.get_width(), it.get_height()); - platform: waveshare_epaper cs_pin: GPIO23 dc_pin: GPIO23 busy_pin: GPIO23 reset_pin: GPIO23 model: 2.90in full_update_every: 30 lambda: |- it.rectangle(0, 0, it.get_width(), it.get_height()); - platform: waveshare_epaper cs_pin: GPIO23 dc_pin: GPIO23 busy_pin: GPIO23 reset_pin: GPIO23 model: 2.90inv2 full_update_every: 30 lambda: |- it.rectangle(0, 0, it.get_width(), it.get_height()); external_components: - source: github://esphome/esphome@dev refresh: 1d components: ["bh1750"] - source: ../esphome/components components: ["sntp"]