--- substitutions: devicename: test1_1 sensorname: my textname: template roomname: fastled_room esphome: name: test1-1 name_add_mac_suffix: true platform: ESP32 board: nodemcu-32s platformio_options: board_build.partitions: huge_app.csv on_loop: then: - light.addressable_set: id: addr1 range_from: 0 range_to: 100 red: 100% green: !lambda "return 255;" blue: 0% white: 100% wled: wifi: networks: - ssid: "MySSID" password: "password1" uart: - id: adalight_uart tx_pin: GPIO25 rx_pin: GPIO26 baud_rate: 115200 rx_buffer_size: 1024 - id: uart_ld2450 tx_pin: 18 rx_pin: 19 baud_rate: 256000 parity: NONE stop_bits: 1 api: ld2450: id: ld2450_radar uart_id: uart_ld2450 throttle: 1000ms adalight: network: e131: power_supply: - id: atx_power_supply enable_time: 20ms keep_on_time: 10s enable_on_boot: true pin: number: 13 inverted: true i2c: sda: 21 scl: number: 22 allow_other_uses: true scan: true frequency: 100kHz setup_priority: -100 id: i2c_bus pca9685: frequency: 500 address: 0x0 i2c_id: i2c_bus output: - platform: pca9685 id: pca_0 channel: 0 - platform: pca9685 id: pca_1 channel: 1 - platform: pca9685 id: pca_2 channel: 2 light: - platform: rgb name: Living Room Lights id: ${roomname}_lights red: pca_0 green: pca_1 blue: pca_2 - platform: fastled_clockless id: addr1 chipset: WS2811 pin: allow_other_uses: true number: GPIO23 num_leds: 60 rgb_order: BRG max_refresh_rate: 20ms power_supply: atx_power_supply color_correct: [75%, 100%, 50%] name: FastLED WS2811 Light effects: - addressable_color_wipe: - addressable_color_wipe: name: Color Wipe Effect With Custom Values colors: - red: 100% green: 100% blue: 100% num_leds: 1 - red: 0% green: 0% blue: 0% num_leds: 1 add_led_interval: 100ms reverse: false - addressable_scan: - addressable_scan: name: Scan Effect With Custom Values move_interval: 100ms - addressable_twinkle: - addressable_twinkle: name: Twinkle Effect With Custom Values twinkle_probability: 5% progress_interval: 4ms - addressable_random_twinkle: - addressable_random_twinkle: name: Random Twinkle Effect With Custom Values twinkle_probability: 5% progress_interval: 32ms - addressable_fireworks: - addressable_fireworks: name: Fireworks Effect With Custom Values update_interval: 32ms spark_probability: 10% use_random_color: false fade_out_rate: 120 - addressable_flicker: - addressable_flicker: name: Flicker Effect With Custom Values update_interval: 16ms intensity: 5% - addressable_lambda: name: Test For Custom Lambda Effect lambda: |- if (initial_run) { it[0] = current_color; } - wled: port: 11111 - adalight: uart_id: adalight_uart - e131: universe: 1 - automation: name: Custom Effect sequence: - light.addressable_set: id: addr1 red: 100% green: 100% blue: 0% - delay: 100ms - light.addressable_set: id: addr1 red: 0% green: 100% blue: 0% - platform: fastled_spi id: addr2 chipset: WS2801 data_pin: allow_other_uses: true number: GPIO23 clock_pin: number: GPIO22 allow_other_uses: true data_rate: 2MHz num_leds: 60 rgb_order: BRG name: FastLED SPI Light - platform: neopixelbus id: addr3 name: Neopixelbus Light gamma_correct: 2.8 color_correct: [0.0, 0.0, 0.0, 0.0] default_transition_length: 10s power_supply: atx_power_supply effects: - addressable_flicker: name: Flicker Effect With Custom Values update_interval: 16ms intensity: 5% type: GRBW variant: SK6812 method: ESP32_I2S_0 num_leds: 60 pin: allow_other_uses: true number: GPIO23 - platform: partition name: Partition Light segments: - id: addr1 from: 0 to: 0 - id: addr2 from: 1 to: 10 - id: addr2 from: 20 to: 25 - single_light_id: ${roomname}_lights canbus: - platform: esp32_can id: esp32_internal_can rx_pin: GPIO04 tx_pin: GPIO05 can_id: 4 bit_rate: 50kbps button: - platform: template name: Canbus Actions on_press: - canbus.send: "abc" - canbus.send: [0, 1, 2] - canbus.send: !lambda return {0, 1, 2}; - platform: ld2450 ld2450_id: ld2450_radar factory_reset: name: "LD2450 Factory Reset" entity_category: "config" restart: name: "LD2450 Restart" entity_category: "config" sensor: - platform: ld2450 ld2450_id: ld2450_radar target_count: name: Presence Target Count still_target_count: name: Still Target Count moving_target_count: name: Moving Target Count target_1: x: name: Target-1 X y: name: Target-1 Y speed: name: Target-1 Speed angle: name: Target-1 Angle distance: name: Target-1 Distance resolution: name: Target-1 Resolution target_2: x: name: Target-2 X y: name: Target-2 Y speed: name: Target-2 Speed angle: name: Target-2 Angle distance: name: Target-2 Distance resolution: name: Target-2 Resolution target_3: x: name: Target-3 X y: name: Target-3 Y speed: name: Target-3 Speed angle: name: Target-3 Angle distance: name: Target-3 Distance resolution: name: Target-3 Resolution zone_1: target_count: name: Zone-1 All Target Count still_target_count: name: Zone-1 Still Target Count moving_target_count: name: Zone-1 Moving Target Count zone_2: target_count: name: Zone-2 All Target Count still_target_count: name: Zone-2 Still Target Count moving_target_count: name: Zone-2 Moving Target Count zone_3: target_count: name: Zone-3 All Target Count still_target_count: name: Zone-3 Still Target Count moving_target_count: name: Zone-3 Moving Target Count binary_sensor: - platform: ld2450 ld2450_id: ld2450_radar has_target: name: Presence has_moving_target: name: Moving Target has_still_target: name: Still Target switch: - platform: ld2450 ld2450_id: ld2450_radar bluetooth: name: "Bluetooth" multi_target: name: "Multi Target Tracking" text_sensor: - platform: ld2450 ld2450_id: ld2450_radar version: name: "LD2450 Firmware" mac_address: name: "LD2450 BT MAC" target_1: direction: name: "Target-1 Direction" target_2: direction: name: "Target-2 Direction" target_3: direction: name: "Target-3 Direction" number: - platform: ld2450 ld2450_id: ld2450_radar presence_timeout: name: "Timeout" zone_1: x1: name: Zone-1 X1 y1: name: Zone-1 Y1 x2: name: Zone-1 X2 y2: name: Zone-1 Y2 zone_2: x1: name: Zone-2 X1 y1: name: Zone-2 Y1 x2: name: Zone-2 X2 y2: name: Zone-2 Y2 zone_3: x1: name: Zone-3 X1 y1: name: Zone-3 Y1 x2: name: Zone-3 X2 y2: name: Zone-3 Y2 select: - platform: ld2450 ld2450_id: ld2450_radar baud_rate: name: "Baud rate" zone_type: name: "Zone Type"