esphome:
  name: $devicename
  platform: ESP32
  board: nodemcu-32s
  build_path: build/test4

substitutions:
  devicename: test-4

ethernet:
  type: LAN8720
  mdc_pin: GPIO23
  mdio_pin: GPIO25
  clk_mode: GPIO0_IN
  phy_addr: 0
  power_pin: GPIO25
  manual_ip:
    static_ip: 192.168.178.56
    gateway: 192.168.178.1
    subnet: 255.255.255.0
  domain: .local

api:

i2c:
  sda: 21
  scl: 22
  scan: False

spi:
  clk_pin: GPIO21
  mosi_pin: GPIO22
  miso_pin: GPIO23

uart:
  tx_pin: GPIO22
  rx_pin: GPIO23
  baud_rate: 115200

ota:
  safe_mode: True
  port: 3286

logger:
  level: DEBUG

web_server:
  auth:
    username: admin
    password: admin

time:
  - platform: sntp
    id: sntp_time

tuya:
  time_id: sntp_time

sensor:
  - platform: homeassistant
    entity_id: sensor.hello_world
    id: ha_hello_world
  - platform: tuya
    id: tuya_sensor
    sensor_datapoint: 1
#
# platform sensor.apds9960 requires component apds9960
#
#  - platform: apds9960
#    type: proximity
#    name: APDS9960 Proximity
#  - platform: apds9960
#    type: clear
#    name: APDS9960 Clear
#  - platform: apds9960
#    type: red
#    name: APDS9960 Red
#  - platform: apds9960
#    type: green
#    name: APDS9960 Green
#  - platform: apds9960
#    type: blue
#    name: APDS9960 Blue

binary_sensor:
  - platform: tuya
    id: tuya_binary_sensor
    sensor_datapoint: 1
  - platform: template
    id: ar1
    lambda: 'return {};'
    filters:
      - autorepeat:
        - delay: 2s
          time_off: 100ms
          time_on: 900ms
        - delay: 4s
          time_off: 100ms
          time_on: 400ms
    on_state:
      then:
        - lambda: 'ESP_LOGI("ar1:", "%d", x);'
  - platform: xpt2046
    xpt2046_id: touchscreen
    id: touch_key0
    x_min: 80
    x_max: 160
    y_min: 106
    y_max: 212
    on_state:
      - lambda: 'ESP_LOGI("main", "key0: %s", (x ? "touch" : "release"));'

climate:
  - platform: tuya
    id: tuya_climate
    switch_datapoint: 1
    target_temperature_datapoint: 3
    current_temperature_multiplier: 0.5
    target_temperature_multiplier: 0.5

switch:
  - platform: tuya
    id: tuya_switch
    switch_datapoint: 1

light:
  - platform: fastled_clockless
    id: led_matrix_32x8
    name: "led_matrix_32x8"
    chipset: WS2812B
    pin: GPIO15
    num_leds: 256
    rgb_order: GRB
    default_transition_length: 0s
    color_correct: [50%, 50%, 50%]

display:
  - platform: addressable_light
    id: led_matrix_32x8_display
    addressable_light_id: led_matrix_32x8
    width: 32
    height: 8
    pixel_mapper: |-
      if (x % 2 == 0) {
        return (x * 8) + y;
      }
      return (x * 8) + (7 - y);
    lambda: |-
      Color red = Color(0xFF0000);
      Color green = Color(0x00FF00);
      Color blue = Color(0x0000FF);
      it.rectangle(0, 0, it.get_width(), it.get_height(), red);
      it.rectangle(1, 1, it.get_width()-2, it.get_height()-2, green);
      it.rectangle(2, 2, it.get_width()-4, it.get_height()-4, blue);
      it.rectangle(3, 3, it.get_width()-6, it.get_height()-6, red);
    rotation: 0°
    update_interval: 16ms
  - platform: waveshare_epaper
    cs_pin: GPIO23
    dc_pin: GPIO23
    busy_pin: GPIO23
    reset_pin: GPIO23
    model: 2.13in-ttgo-b1
    full_update_every: 30
    lambda: |-
      it.rectangle(0, 0, it.get_width(), it.get_height());
  - platform: waveshare_epaper
    cs_pin: GPIO23
    dc_pin: GPIO23
    busy_pin: GPIO23
    reset_pin: GPIO23
    model: 2.90in
    full_update_every: 30
    lambda: |-
      it.rectangle(0, 0, it.get_width(), it.get_height());
  - platform: waveshare_epaper
    cs_pin: GPIO23
    dc_pin: GPIO23
    busy_pin: GPIO23
    reset_pin: GPIO23
    model: 2.90inv2
    full_update_every: 30
    lambda: |-
      it.rectangle(0, 0, it.get_width(), it.get_height());

esp32_camera:
  name: ESP-32 Camera
  data_pins: [GPIO17, GPIO35, GPIO34, GPIO5, GPIO39, GPIO18, GPIO36, GPIO19]
  vsync_pin: GPIO22
  href_pin: GPIO26
  pixel_clock_pin: GPIO21
  external_clock:
    pin: GPIO27
    frequency: 20MHz
  i2c_pins:
    sda: GPIO25
    scl: GPIO23
  reset_pin: GPIO15
  power_down_pin: GPIO1
  resolution: 640x480
  jpeg_quality: 10

external_components:
  - source: github://esphome/esphome@dev
    refresh: 1d
    components: ["bh1750"]
  - source: ../esphome/components
    components: ["sntp"]
xpt2046:
  id: touchscreen
  cs_pin: 17
  irq_pin: 16
  update_interval: 50ms
  report_interval: 1s
  threshold: 400
  dimension_x: 240
  dimension_y: 320
  calibration_x_min: 3860
  calibration_x_max: 280
  calibration_y_min: 340
  calibration_y_max: 3860
  swap_x_y: False
  on_state:
    - lambda: |-
        ESP_LOGI("main", "args x=%d, y=%d, touched=%s", x, y, (touched ? "touch" : "release"));
        ESP_LOGI("main", "member x=%d, y=%d, touched=%d, x_raw=%d, y_raw=%d, z_raw=%d",
            id(touchscreen).x,
            id(touchscreen).y,
            (int) id(touchscreen).touched,
            id(touchscreen).x_raw,
            id(touchscreen).y_raw,
            id(touchscreen).z_raw
            );