esphome:
  name: $devicename
  platform: ESP32
  board: nodemcu-32s
  build_path: build/test2

substitutions:
  devicename: test2

ethernet:
  type: LAN8720
  mdc_pin: GPIO23
  mdio_pin: GPIO25
  clk_mode: GPIO0_IN
  phy_addr: 0
  power_pin: GPIO25
  enable_mdns: false
  manual_ip:
    static_ip: 192.168.178.56
    gateway: 192.168.178.1
    subnet: 255.255.255.0
  domain: .local

api:

i2c:
  sda: 21
  scl: 22
  scan: False

spi:
  clk_pin: GPIO21
  mosi_pin: GPIO22
  miso_pin: GPIO23

uart:
  tx_pin: GPIO22
  rx_pin: GPIO23
  baud_rate: 115200

ota:
  safe_mode: True
  port: 3286
  num_attempts: 15

logger:
  level: DEBUG

deep_sleep:
  run_duration: 20s
  sleep_duration: 50s
  wakeup_pin: GPIO39
  wakeup_pin_mode: INVERT_WAKEUP

as3935_i2c:
  irq_pin: GPIO12

mcp3008:
  - id: 'mcp3008_hub'
    cs_pin: GPIO12

sensor:
  - platform: homeassistant
    entity_id: sensor.hello_world
    id: ha_hello_world
  - platform: ble_rssi
    mac_address: AC:37:43:77:5F:4C
    name: 'BLE Google Home Mini RSSI value'
  - platform: ble_rssi
    service_uuid: '11aa'
    name: 'BLE Test Service 16'
  - platform: ble_rssi
    service_uuid: '11223344'
    name: 'BLE Test Service 32'
  - platform: ble_rssi
    service_uuid: '11223344-5566-7788-99aa-bbccddeeff00'
    name: 'BLE Test Service 128'
  - platform: b_parasite
    mac_address: F0:CA:F0:CA:01:01
    humidity:
      name: 'b-parasite Air Humidity'
    temperature:
      name: 'b-parasite Air Temperature'
    moisture:
      name: 'b-parasite Soil Moisture'
    battery_voltage:
      name: 'b-parasite Battery Voltage'
  - platform: senseair
    id: senseair0
    co2:
      name: 'SenseAir CO2 Value'
      on_value:
        then:
          - senseair.background_calibration: senseair0
          - senseair.background_calibration_result: senseair0
          - senseair.abc_get_period: senseair0
          - senseair.abc_enable: senseair0
          - senseair.abc_disable: senseair0
    update_interval: 15s
  - platform: ruuvitag
    mac_address: FF:56:D3:2F:7D:E8
    humidity:
      name: 'RuuviTag Humidity'
    temperature:
      name: 'RuuviTag Temperature'
    pressure:
      name: 'RuuviTag Pressure'
    acceleration_x:
      name: 'RuuviTag Acceleration X'
    acceleration_y:
      name: 'RuuviTag Acceleration Y'
    acceleration_z:
      name: 'RuuviTag Acceleration Z'
    battery_voltage:
      name: 'RuuviTag Battery Voltage'
    tx_power:
      name: 'RuuviTag TX Power'
    movement_counter:
      name: 'RuuviTag Movement Counter'
    measurement_sequence_number:
      name: 'RuuviTag Measurement Sequence Number'
  - platform: as3935
    lightning_energy:
      name: 'Lightning Energy'
    distance:
      name: 'Distance Storm'
  - platform: xiaomi_hhccjcy01
    mac_address: 94:2B:FF:5C:91:61
    temperature:
      name: 'Xiaomi HHCCJCY01 Temperature'
    moisture:
      name: 'Xiaomi HHCCJCY01 Moisture'
    illuminance:
      name: 'Xiaomi HHCCJCY01 Illuminance'
    conductivity:
      name: 'Xiaomi HHCCJCY01 Soil Conductivity'
    battery_level:
      name: 'Xiaomi HHCCJCY01 Battery Level'
  - platform: xiaomi_lywsdcgq
    mac_address: 7A:80:8E:19:36:BA
    temperature:
      name: 'Xiaomi LYWSDCGQ Temperature'
    humidity:
      name: 'Xiaomi LYWSDCGQ Humidity'
    battery_level:
      name: 'Xiaomi LYWSDCGQ Battery Level'
  - platform: xiaomi_lywsd02
    mac_address: 3F:5B:7D:82:58:4E
    temperature:
      name: 'Xiaomi LYWSD02 Temperature'
    humidity:
      name: 'Xiaomi LYWSD02 Humidity'
    battery_level:
      name: 'Xiaomi LYWSD02 Battery Level'
  - platform: xiaomi_cgg1
    mac_address: 7A:80:8E:19:36:BA
    temperature:
      name: 'Xiaomi CGG1 Temperature'
    humidity:
      name: 'Xiaomi CGG1 Humidity'
    battery_level:
      name: 'Xiaomi CGG1 Battery Level'
  - platform: xiaomi_gcls002
    mac_address: '94:2B:FF:5C:91:61'
    temperature:
      name: 'GCLS02 Temperature'
    moisture:
      name: 'GCLS02 Moisture'
    conductivity:
      name: 'GCLS02 Soil Conductivity'
    illuminance:
      name: 'GCLS02 Illuminance'
  - platform: xiaomi_hhccpot002
    mac_address: '94:2B:FF:5C:91:61'
    moisture:
      name: 'HHCCPOT002 Moisture'
    conductivity:
      name: 'HHCCPOT002 Soil Conductivity'
  - platform: xiaomi_lywsd03mmc
    mac_address: 'A4:C1:38:4E:16:78'
    bindkey: 'e9efaa6873f9f9c87a5e75a5f814801c'
    temperature:
      name: 'Xiaomi LYWSD03MMC Temperature'
    humidity:
      name: 'Xiaomi LYWSD03MMC Humidity'
    battery_level:
      name: 'Xiaomi LYWSD03MMC Battery Level'
  - platform: xiaomi_cgd1
    mac_address: 'A4:C1:38:D1:61:7D'
    bindkey: 'c99d2313182473b38001086febf781bd'
    temperature:
      name: 'Xiaomi CGD1 Temperature'
    humidity:
      name: 'Xiaomi CGD1 Humidity'
    battery_level:
      name: 'Xiaomi CGD1 Battery Level'
  - platform: xiaomi_jqjcy01ym
    mac_address: '7A:80:8E:19:36:BA'
    temperature:
      name: 'JQJCY01YM Temperature'
    humidity:
      name: 'JQJCY01YM Humidity'
    formaldehyde:
      name: 'JQJCY01YM Formaldehyde'
    battery_level:
      name: 'JQJCY01YM Battery Level'
  - platform: atc_mithermometer
    mac_address: 'A4:C1:38:4E:16:78'
    temperature:
      name: 'ATC Temperature'
    humidity:
      name: 'ATC Humidity'
    battery_level:
      name: 'ATC Battery-Level'
    battery_voltage:
      name: 'ATC Battery-Voltage'
  - platform: inkbird_ibsth1_mini
    mac_address: 38:81:D7:0A:9C:11
    temperature:
      name: 'Inkbird IBS-TH1 Temperature'
    humidity:
      name: 'Inkbird IBS-TH1 Humidity'
    battery_level:
      name: 'Inkbird IBS-TH1 Battery Level'
  - platform: sgp40
    name: 'Workshop VOC'
    update_interval: 5s
    store_baseline: 'true'
  - platform: mcp3008
    update_interval: 5s
    mcp3008_id: 'mcp3008_hub'
    id: freezer_temp_source
    reference_voltage: 3.19
    number: 0
time:
  - platform: homeassistant
    on_time:
      - at: '16:00:00'
        then:
          - logger.log: It's 16:00

esp32_touch:
  setup_mode: True

binary_sensor:
  - platform: homeassistant
    entity_id: binary_sensor.hello_world
    id: ha_hello_world_binary
  - platform: ble_presence
    mac_address: AC:37:43:77:5F:4C
    name: 'ESP32 BLE Tracker Google Home Mini'
  - platform: ble_presence
    service_uuid: '11aa'
    name: 'BLE Test Service 16 Presence'
  - platform: ble_presence
    service_uuid: '11223344'
    name: 'BLE Test Service 32 Presence'
  - platform: ble_presence
    service_uuid: '11223344-5566-7788-99aa-bbccddeeff00'
    name: 'BLE Test Service 128 Presence'
  - platform: esp32_touch
    name: 'ESP32 Touch Pad GPIO27'
    pin: GPIO27
    threshold: 1000
  - platform: as3935
    name: 'Storm Alert'
  - platform: xiaomi_mue4094rt
    name: 'MUE4094RT Motion'
    mac_address: '7A:80:8E:19:36:BA'
    timeout: '5s'
  - platform: xiaomi_mjyd02yla
    name: 'MJYD02YL-A Motion'
    mac_address: '50:EC:50:CD:32:02'
    bindkey: '48403ebe2d385db8d0c187f81e62cb64'
    idle_time:
      name: 'MJYD02YL-A Idle Time'
    light:
      name: 'MJYD02YL-A Light Status'
    battery_level:
      name: 'MJYD02YL-A Battery Level'
  - platform: xiaomi_wx08zm
    name: 'WX08ZM Activation State'
    mac_address: '74:a3:4a:b5:07:34'
    tablet:
      name: 'WX08ZM Tablet Resource'
    battery_level:
      name: 'WX08ZM Battery Level'

esp32_ble_tracker:
  on_ble_advertise:
    - mac_address: AC:37:43:77:5F:4C
      then:
        - lambda: !lambda |-
            ESP_LOGD("main", "The device address is %s", x.address_str().c_str());
    - then:
        - lambda: !lambda |-
            ESP_LOGD("main", "The device address is %s", x.address_str().c_str());
  on_ble_service_data_advertise:
    - service_uuid: ABCD
      then:
        - lambda: !lambda |-
            ESP_LOGD("main", "Length of service data is %i", x.size());
  on_ble_manufacturer_data_advertise:
    - manufacturer_id: ABCD
      then:
        - lambda: !lambda |-
            ESP_LOGD("main", "Length of manufacturer data is %i", x.size());

#esp32_ble_beacon:
#  type: iBeacon
#  uuid: 'c29ce823-e67a-4e71-bff2-abaa32e77a98'

status_led:
  pin: GPIO2

text_sensor:
  - platform: version
    name: 'ESPHome Version'
    icon: mdi:icon
    id: version_sensor
    on_value:
      - if:
          condition:
            - api.connected:
          then:
            - lambda: !lambda |-
                ESP_LOGD("main", "The state is %s=%s", x.c_str(), id(version_sensor).state.c_str());
      - script.execute: my_script
      - homeassistant.service:
          service: notify.html5
          data:
            title: New Humidity
          data_template:
            message: The humidity is {{ my_variable }}%.
          variables:
            my_variable: |-
              return id(version_sensor).state;
            my_variable_str: |-
              return "Hello World";
      - homeassistant.service:
          service: light.turn_on
          data:
            entity_id: light.my_light
      - homeassistant.tag_scanned:
          tag: 1234-abcd
      - homeassistant.tag_scanned: 1234-abcd
      - deep_sleep.enter:
          sleep_duration: 30min
  - platform: template
    name: 'Template Text Sensor'
    lambda: |-
      return {"Hello World"};
  - platform: homeassistant
    entity_id: sensor.hello_world2
    id: ha_hello_world2
  - platform: ble_scanner
    name: Scanner

script:
  - id: my_script
    mode: single
    then:
      - lambda: 'ESP_LOGD("main", "Hello World!");'
  - id: my_script_queued
    mode: queued
    max_runs: 2
    then:
      - lambda: 'ESP_LOGD("main", "Hello World!");'
  - id: my_script_parallel
    mode: parallel
    max_runs: 2
    then:
      - lambda: 'ESP_LOGD("main", "Hello World!");'
  - id: my_script_restart
    mode: restart
    then:
      - lambda: 'ESP_LOGD("main", "Hello World!");'

stepper:
  - platform: uln2003
    id: my_stepper
    pin_a: GPIO23
    pin_b: GPIO27
    pin_c: GPIO25
    pin_d: GPIO26
    sleep_when_done: no
    step_mode: HALF_STEP
    max_speed: 250 steps/s

    # Optional:
    acceleration: inf
    deceleration: inf

interval:
  interval: 5s
  then:
    - logger.log: 'Interval Run'

display: