#include "sts3x.h" #include "esphome/core/log.h" namespace esphome { namespace sts3x { static const char *const TAG = "sts3x"; static const uint16_t STS3X_COMMAND_READ_SERIAL_NUMBER = 0x3780; static const uint16_t STS3X_COMMAND_READ_STATUS = 0xF32D; static const uint16_t STS3X_COMMAND_SOFT_RESET = 0x30A2; static const uint16_t STS3X_COMMAND_POLLING_H = 0x2400; /// Commands for future use static const uint16_t STS3X_COMMAND_CLEAR_STATUS = 0x3041; static const uint16_t STS3X_COMMAND_HEATER_ENABLE = 0x306D; static const uint16_t STS3X_COMMAND_HEATER_DISABLE = 0x3066; static const uint16_t STS3X_COMMAND_FETCH_DATA = 0xE000; void STS3XComponent::setup() { ESP_LOGCONFIG(TAG, "Setting up STS3x..."); if (!this->write_command(STS3X_COMMAND_READ_SERIAL_NUMBER)) { this->mark_failed(); return; } uint16_t raw_serial_number[2]; if (!this->read_data(raw_serial_number, 1)) { this->mark_failed(); return; } uint32_t serial_number = (uint32_t(raw_serial_number[0]) << 16); ESP_LOGV(TAG, " Serial Number: 0x%08X", serial_number); } void STS3XComponent::dump_config() { ESP_LOGCONFIG(TAG, "STS3x:"); LOG_I2C_DEVICE(this); if (this->is_failed()) { ESP_LOGE(TAG, "Communication with ST3x failed!"); } LOG_UPDATE_INTERVAL(this); LOG_SENSOR(" ", "STS3x", this); } float STS3XComponent::get_setup_priority() const { return setup_priority::DATA; } void STS3XComponent::update() { if (this->status_has_warning()) { ESP_LOGD(TAG, "Retrying to reconnect the sensor."); this->write_command(STS3X_COMMAND_SOFT_RESET); } if (!this->write_command(STS3X_COMMAND_POLLING_H)) { this->status_set_warning(); return; } this->set_timeout(50, [this]() { uint16_t raw_data[1]; if (!this->read_data(raw_data, 1)) { this->status_set_warning(); return; } float temperature = 175.0f * float(raw_data[0]) / 65535.0f - 45.0f; ESP_LOGD(TAG, "Got temperature=%.2f°C", temperature); this->publish_state(temperature); this->status_clear_warning(); }); } } // namespace sts3x } // namespace esphome