mirror of
https://github.com/esphome/esphome.git
synced 2024-12-02 19:54:14 +01:00
add484a2ea
Co-authored-by: Otto Winter <otto@otto-winter.com> Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
80 lines
2.2 KiB
Python
80 lines
2.2 KiB
Python
import logging
|
|
|
|
from esphome.const import (
|
|
CONF_INPUT,
|
|
CONF_MODE,
|
|
CONF_NUMBER,
|
|
CONF_OUTPUT,
|
|
CONF_PULLDOWN,
|
|
CONF_PULLUP,
|
|
)
|
|
|
|
import esphome.config_validation as cv
|
|
|
|
_ESP32S2_SPI_PSRAM_PINS = {
|
|
26: "SPICS1",
|
|
27: "SPIHD",
|
|
28: "SPIWP",
|
|
29: "SPICS0",
|
|
30: "SPICLK",
|
|
31: "SPIQ",
|
|
32: "SPID",
|
|
}
|
|
|
|
_ESP32S2_STRAPPING_PINS = {0, 45, 46}
|
|
|
|
_LOGGER = logging.getLogger(__name__)
|
|
|
|
|
|
def esp32_s2_validate_gpio_pin(value):
|
|
if value < 0 or value > 46:
|
|
raise cv.Invalid(f"Invalid pin number: {value} (must be 0-46)")
|
|
|
|
if value in _ESP32S2_SPI_PSRAM_PINS:
|
|
raise cv.Invalid(
|
|
f"This pin cannot be used on ESP32-S2s and is already used by the SPI/PSRAM interface (function: {_ESP32S2_SPI_PSRAM_PINS[value]})"
|
|
)
|
|
if value in _ESP32S2_STRAPPING_PINS:
|
|
_LOGGER.warning(
|
|
"GPIO%d is a Strapping PIN and should be avoided.\n"
|
|
"Attaching external pullup/down resistors to strapping pins can cause unexpected failures.\n"
|
|
"See https://esphome.io/guides/faq.html#why-am-i-getting-a-warning-about-strapping-pins",
|
|
value,
|
|
)
|
|
|
|
if value in (22, 23, 24, 25):
|
|
# These pins are not exposed in GPIO mux (reason unknown)
|
|
# but they're missing from IO_MUX list in datasheet
|
|
raise cv.Invalid(f"The pin GPIO{value} is not usable on ESP32-S2s.")
|
|
|
|
return value
|
|
|
|
|
|
def esp32_s2_validate_supports(value):
|
|
num = value[CONF_NUMBER]
|
|
mode = value[CONF_MODE]
|
|
is_input = mode[CONF_INPUT]
|
|
is_output = mode[CONF_OUTPUT]
|
|
is_pullup = mode[CONF_PULLUP]
|
|
is_pulldown = mode[CONF_PULLDOWN]
|
|
|
|
if num < 0 or num > 46:
|
|
raise cv.Invalid(f"Invalid pin number: {num} (must be 0-46)")
|
|
if is_input:
|
|
# All ESP32 pins support input mode
|
|
pass
|
|
if is_output and num == 46:
|
|
raise cv.Invalid(
|
|
f"GPIO{num} does not support output pin mode.",
|
|
[CONF_MODE, CONF_OUTPUT],
|
|
)
|
|
if is_pullup and num == 46:
|
|
raise cv.Invalid(
|
|
f"GPIO{num} does not support pullups.", [CONF_MODE, CONF_PULLUP]
|
|
)
|
|
if is_pulldown and num == 46:
|
|
raise cv.Invalid(
|
|
f"GPIO{num} does not support pulldowns.", [CONF_MODE, CONF_PULLDOWN]
|
|
)
|
|
|
|
return value
|